MIPS: BMIPS: Add early CPU initialization code

Port the stblinux-3.3 code to perform a bunch of CPU-specific initialization,
make it compatible with run-time detection of the CPU, and unroll the
brcmstb-specific macros: BDEV_RB(), BDEV_UNSET.

The "pref 30" disabling is done as a quirk. This is a preliminary change to
allow the use of the "rotr" instruction gated by cpu_has_rixi.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: pgynther@google.com
Cc: paul.burton@imgtec.com
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12504/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

3 files changed, 89 insertions, 0 deletions

diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 35535284b39e..b764995343c1 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -111,6 +111,7 @@ static const struct bmips_quirk bmips_quirk_list[] = {
 
 void __init prom_init(void)
 {
+	bmips_cpu_setup();
 	register_bmips_smp_ops();
 }
 
diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h
index 6d25ad33ec78..a92aee7b977a 100644
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -88,6 +88,7 @@ extern unsigned long bmips_tp1_irqs;
 
 extern void bmips_ebase_setup(void);
 extern asmlinkage void plat_wired_tlb_setup(void);
+extern void bmips_cpu_setup(void);
 
 static inline unsigned long bmips_read_zscm_reg(unsigned int offset)
 {
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 6d11788b4502..e02addc0307f 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -566,3 +566,90 @@ asmlinkage void __weak plat_wired_tlb_setup(void)
 	 * once the wired entries are present.
 	 */
 }
+
+void __init bmips_cpu_setup(void)
+{
+	void __iomem __maybe_unused *cbr = BMIPS_GET_CBR();
+	u32 __maybe_unused cfg;
+
+	switch (current_cpu_type()) {
+	case CPU_BMIPS3300:
+		/* Set BIU to async mode */
+		set_c0_brcm_bus_pll(BIT(22));
+		__sync();
+
+		/* put the BIU back in sync mode */
+		clear_c0_brcm_bus_pll(BIT(22));
+
+		/* clear BHTD to enable branch history table */
+		clear_c0_brcm_reset(BIT(16));
+
+		/* Flush and enable RAC */
+		cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+		__raw_writel(cfg | 0x100, BMIPS_RAC_CONFIG);
+		__raw_readl(cbr + BMIPS_RAC_CONFIG);
+
+		cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+		__raw_writel(cfg | 0xf, BMIPS_RAC_CONFIG);
+		__raw_readl(cbr + BMIPS_RAC_CONFIG);
+
+		cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
+		__raw_writel(cfg | 0x0fff0000, cbr + BMIPS_RAC_ADDRESS_RANGE);
+		__raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
+		break;
+
+	case CPU_BMIPS4380:
+		/* CBG workaround for early BMIPS4380 CPUs */
+		switch (read_c0_prid()) {
+		case 0x2a040:
+		case 0x2a042:
+		case 0x2a044:
+		case 0x2a060:
+			cfg = __raw_readl(cbr + BMIPS_L2_CONFIG);
+			__raw_writel(cfg & ~0x07000000, cbr + BMIPS_L2_CONFIG);
+			__raw_readl(cbr + BMIPS_L2_CONFIG);
+		}
+
+		/* clear BHTD to enable branch history table */
+		clear_c0_brcm_config_0(BIT(21));
+
+		/* XI/ROTR enable */
+		set_c0_brcm_config_0(BIT(23));
+		set_c0_brcm_cmt_ctrl(BIT(15));
+		break;
+
+	case CPU_BMIPS5000:
+		/* enable RDHWR, BRDHWR */
+		set_c0_brcm_config(BIT(17) | BIT(21));
+
+		/* Disable JTB */
+		__asm__ __volatile__(
+		"	.set	noreorder\n"
+		"	li	$8, 0x5a455048\n"
+		"	.word	0x4088b00f\n"	/* mtc0	t0, $22, 15 */
+		"	.word	0x4008b008\n"	/* mfc0	t0, $22, 8 */
+		"	li	$9, 0x00008000\n"
+		"	or	$8, $8, $9\n"
+		"	.word	0x4088b008\n"	/* mtc0	t0, $22, 8 */
+		"	sync\n"
+		"	li	$8, 0x0\n"
+		"	.word	0x4088b00f\n"	/* mtc0	t0, $22, 15 */
+		"	.set	reorder\n"
+		: : : "$8", "$9");
+
+		/* XI enable */
+		set_c0_brcm_config(BIT(27));
+
+		/* enable MIPS32R2 ROR instruction for XI TLB handlers */
+		__asm__ __volatile__(
+		"	li	$8, 0x5a455048\n"
+		"	.word	0x4088b00f\n"	/* mtc0 $8, $22, 15 */
+		"	nop; nop; nop\n"
+		"	.word	0x4008b008\n"	/* mfc0 $8, $22, 8 */
+		"	lui	$9, 0x0100\n"
+		"	or	$8, $9\n"
+		"	.word	0x4088b008\n"	/* mtc0 $8, $22, 8 */
+		: : : "$8", "$9");
+		break;
+	}
+}