[MIPS] Rewrite all the assembler interrupt handlers to C.

Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had.  And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.

The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 86 insertions, 6 deletions

diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index bc0ebc69bfb3..db53950b7cfb 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -39,8 +39,6 @@
 
 static struct atlas_ictrl_regs *atlas_hw0_icregs;
 
-extern asmlinkage void mipsIRQ(void);
-
 #if 0
 #define DEBUG_INT(x...) printk(x)
 #else
@@ -98,7 +96,7 @@ static inline int ls1bit32(unsigned int x)
 	return b;
 }
 
-void atlas_hw0_irqdispatch(struct pt_regs *regs)
+static inline void atlas_hw0_irqdispatch(struct pt_regs *regs)
 {
 	unsigned long int_status;
 	int irq;
@@ -116,6 +114,91 @@ void atlas_hw0_irqdispatch(struct pt_regs *regs)
 	do_IRQ(irq, regs);
 }
 
+static inline int clz(unsigned long x)
+{
+	__asm__ (
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	return -clz(pending) + 31 - CAUSEB_IP;
+#else
+	unsigned int a0 = 7;
+	unsigned int t0;
+
+	t0 = s0 & 0xf000;
+	t0 = t0 < 1;
+	t0 = t0 << 2;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0xc000;
+	t0 = t0 < 1;
+	t0 = t0 << 1;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0x8000;
+	t0 = t0 < 1;
+	//t0 = t0 << 2;
+	a0 = a0 - t0;
+	//s0 = s0 << t0;
+
+	return a0;
+#endif
+}
+
+/*
+ * IRQs on the Atlas board look basically (barring software IRQs which we
+ * don't use at all and all external interrupt sources are combined together
+ * on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq == MIPSCPU_INT_ATLAS)
+		atlas_hw0_irqdispatch(regs);
+	else if (irq > 0)
+		do_IRQ(MIPSCPU_INT_BASE + irq, regs);
+	else
+		spurious_interrupt(regs);
+}
+
 void __init arch_init_irq(void)
 {
 	int i;
@@ -128,9 +211,6 @@ void __init arch_init_irq(void)
 	 */
 	atlas_hw0_icregs->intrsten = 0xffffffff;
 
-	/* Now safe to set the exception vector. */
-	set_except_vector(0, mipsIRQ);
-
 	for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) {
 		irq_desc[i].status	= IRQ_DISABLED;
 		irq_desc[i].action	= 0;