[MIPS] Add back support for LASAT platforms

Signed-off-by: Brian Murphy <brian@murphy.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

22 files changed, 2408 insertions, 0 deletions

diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
new file mode 100644
index 000000000000..1d2ee8a9be13
--- /dev/null
+++ b/arch/mips/lasat/Kconfig
@@ -0,0 +1,15 @@
+config PICVUE
+	tristate "PICVUE LCD display driver"
+	depends on LASAT
+
+config PICVUE_PROC
+	tristate "PICVUE LCD display driver /proc interface"
+	depends on PICVUE
+
+config DS1603
+	bool "DS1603 RTC driver"
+	depends on LASAT
+
+config LASAT_SYSCTL
+	bool "LASAT sysctl interface"
+	depends on LASAT
diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile
new file mode 100644
index 000000000000..33791609fe99
--- /dev/null
+++ b/arch/mips/lasat/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the LASAT specific kernel interface routines under Linux.
+#
+
+obj-y	 			+= reset.o setup.o prom.o lasat_board.o \
+				   at93c.o interrupt.o serial.o
+
+obj-$(CONFIG_LASAT_SYSCTL)	+= sysctl.o
+obj-$(CONFIG_DS1603)		+= ds1603.o
+obj-$(CONFIG_PICVUE)		+= picvue.o
+obj-$(CONFIG_PICVUE_PROC)	+= picvue_proc.o
+
+clean:
+	make -C image clean
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c
new file mode 100644
index 000000000000..793e234719a6
--- /dev/null
+++ b/arch/mips/lasat/at93c.c
@@ -0,0 +1,149 @@
+/*
+ * Atmel AT93C46 serial eeprom driver
+ *
+ * Brian Murphy <brian.murphy@eicon.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <asm/lasat/lasat.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "at93c.h"
+
+#define AT93C_ADDR_SHIFT	7
+#define AT93C_ADDR_MAX		((1 << AT93C_ADDR_SHIFT) - 1)
+#define AT93C_RCMD		(0x6 << AT93C_ADDR_SHIFT)
+#define AT93C_WCMD		(0x5 << AT93C_ADDR_SHIFT)
+#define AT93C_WENCMD		0x260
+#define AT93C_WDSCMD		0x200
+
+struct at93c_defs *at93c;
+
+static void at93c_reg_write(u32 val)
+{
+	*at93c->reg = val;
+}
+
+static u32 at93c_reg_read(void)
+{
+	u32 tmp = *at93c->reg;
+	return tmp;
+}
+
+static u32 at93c_datareg_read(void)
+{
+	u32 tmp = *at93c->rdata_reg;
+	return tmp;
+}
+
+static void at93c_cycle_clk(u32 data)
+{
+	at93c_reg_write(data | at93c->clk);
+	lasat_ndelay(250);
+	at93c_reg_write(data & ~at93c->clk);
+	lasat_ndelay(250);
+}
+
+static void at93c_write_databit(u8 bit)
+{
+	u32 data = at93c_reg_read();
+	if (bit)
+		data |= 1 << at93c->wdata_shift;
+	else
+		data &= ~(1 << at93c->wdata_shift);
+
+	at93c_reg_write(data);
+	lasat_ndelay(100);
+	at93c_cycle_clk(data);
+}
+
+static unsigned int at93c_read_databit(void)
+{
+	u32 data;
+
+	at93c_cycle_clk(at93c_reg_read());
+	data = (at93c_datareg_read() >> at93c->rdata_shift) & 1;
+	return data;
+}
+
+static u8 at93c_read_byte(void)
+{
+	int i;
+	u8 data = 0;
+
+	for (i = 0; i <= 7; i++) {
+		data <<= 1;
+		data |= at93c_read_databit();
+	}
+	return data;
+}
+
+static void at93c_write_bits(u32 data, int size)
+{
+	int i;
+	int shift = size - 1;
+	u32 mask = (1 << shift);
+
+	for (i = 0; i < size; i++) {
+		at93c_write_databit((data & mask) >> shift);
+		data <<= 1;
+	}
+}
+
+static void at93c_init_op(void)
+{
+	at93c_reg_write((at93c_reg_read() | at93c->cs) &
+			~at93c->clk & ~(1 << at93c->rdata_shift));
+	lasat_ndelay(50);
+}
+
+static void at93c_end_op(void)
+{
+	at93c_reg_write(at93c_reg_read() & ~at93c->cs);
+	lasat_ndelay(250);
+}
+
+static void at93c_wait(void)
+{
+	at93c_init_op();
+	while (!at93c_read_databit())
+		;
+	at93c_end_op();
+};
+
+static void at93c_disable_wp(void)
+{
+	at93c_init_op();
+	at93c_write_bits(AT93C_WENCMD, 10);
+	at93c_end_op();
+}
+
+static void at93c_enable_wp(void)
+{
+	at93c_init_op();
+	at93c_write_bits(AT93C_WDSCMD, 10);
+	at93c_end_op();
+}
+
+u8 at93c_read(u8 addr)
+{
+	u8 byte;
+	at93c_init_op();
+	at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10);
+	byte = at93c_read_byte();
+	at93c_end_op();
+	return byte;
+}
+
+void at93c_write(u8 addr, u8 data)
+{
+	at93c_disable_wp();
+	at93c_init_op();
+	at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10);
+	at93c_write_bits(data, 8);
+	at93c_end_op();
+	at93c_wait();
+	at93c_enable_wp();
+}
diff --git a/arch/mips/lasat/at93c.h b/arch/mips/lasat/at93c.h
new file mode 100644
index 000000000000..cfe2f99b1d44
--- /dev/null
+++ b/arch/mips/lasat/at93c.h
@@ -0,0 +1,18 @@
+/*
+ * Atmel AT93C46 serial eeprom driver
+ *
+ * Brian Murphy <brian.murphy@eicon.com>
+ *
+ */
+
+extern struct at93c_defs {
+	volatile u32 *reg;
+	volatile u32 *rdata_reg;
+	int rdata_shift;
+	int wdata_shift;
+	u32 cs;
+	u32 clk;
+} *at93c;
+
+u8 at93c_read(u8 addr);
+void at93c_write(u8 addr, u8 data);
diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c
new file mode 100644
index 000000000000..0b315f51d62c
--- /dev/null
+++ b/arch/mips/lasat/ds1603.c
@@ -0,0 +1,183 @@
+/*
+ * Dallas Semiconductors 1603 RTC driver
+ *
+ * Brian Murphy <brian@murphy.dk>
+ *
+ */
+#include <linux/kernel.h>
+#include <asm/lasat/lasat.h>
+#include <linux/delay.h>
+#include <asm/lasat/ds1603.h>
+#include <asm/time.h>
+
+#include "ds1603.h"
+
+#define READ_TIME_CMD 0x81
+#define SET_TIME_CMD 0x80
+#define TRIMMER_SET_CMD 0xC0
+#define TRIMMER_VALUE_MASK 0x38
+#define TRIMMER_SHIFT 3
+
+struct ds_defs *ds1603;
+
+/* HW specific register functions */
+static void rtc_reg_write(unsigned long val)
+{
+	*ds1603->reg = val;
+}
+
+static unsigned long rtc_reg_read(void)
+{
+	unsigned long tmp = *ds1603->reg;
+	return tmp;
+}
+
+static unsigned long rtc_datareg_read(void)
+{
+	unsigned long tmp = *ds1603->data_reg;
+	return tmp;
+}
+
+static void rtc_nrst_high(void)
+{
+	rtc_reg_write(rtc_reg_read() | ds1603->rst);
+}
+
+static void rtc_nrst_low(void)
+{
+	rtc_reg_write(rtc_reg_read() & ~ds1603->rst);
+}
+
+static void rtc_cycle_clock(unsigned long data)
+{
+	data |= ds1603->clk;
+	rtc_reg_write(data);
+	lasat_ndelay(250);
+	if (ds1603->data_reversed)
+		data &= ~ds1603->data;
+	else
+		data |= ds1603->data;
+	data &= ~ds1603->clk;
+	rtc_reg_write(data);
+	lasat_ndelay(250 + ds1603->huge_delay);
+}
+
+static void rtc_write_databit(unsigned int bit)
+{
+	unsigned long data = rtc_reg_read();
+	if (ds1603->data_reversed)
+		bit = !bit;
+	if (bit)
+		data |= ds1603->data;
+	else
+		data &= ~ds1603->data;
+
+	rtc_reg_write(data);
+	lasat_ndelay(50 + ds1603->huge_delay);
+	rtc_cycle_clock(data);
+}
+
+static unsigned int rtc_read_databit(void)
+{
+	unsigned int data;
+
+	data = (rtc_datareg_read() & (1 << ds1603->data_read_shift))
+		>> ds1603->data_read_shift;
+	rtc_cycle_clock(rtc_reg_read());
+	return data;
+}
+
+static void rtc_write_byte(unsigned int byte)
+{
+	int i;
+
+	for (i = 0; i <= 7; i++) {
+		rtc_write_databit(byte & 1L);
+		byte >>= 1;
+	}
+}
+
+static void rtc_write_word(unsigned long word)
+{
+	int i;
+
+	for (i = 0; i <= 31; i++) {
+		rtc_write_databit(word & 1L);
+		word >>= 1;
+	}
+}
+
+static unsigned long rtc_read_word(void)
+{
+	int i;
+	unsigned long word = 0;
+	unsigned long shift = 0;
+
+	for (i = 0; i <= 31; i++) {
+		word |= rtc_read_databit() << shift;
+		shift++;
+	}
+	return word;
+}
+
+static void rtc_init_op(void)
+{
+	rtc_nrst_high();
+
+	rtc_reg_write(rtc_reg_read() & ~ds1603->clk);
+
+	lasat_ndelay(50);
+}
+
+static void rtc_end_op(void)
+{
+	rtc_nrst_low();
+	lasat_ndelay(1000);
+}
+
+/* interface */
+unsigned long ds1603_read(void)
+{
+	unsigned long word;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	rtc_init_op();
+	rtc_write_byte(READ_TIME_CMD);
+	word = rtc_read_word();
+	rtc_end_op();
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return word;
+}
+
+int ds1603_set(unsigned long time)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	rtc_init_op();
+	rtc_write_byte(SET_TIME_CMD);
+	rtc_write_word(time);
+	rtc_end_op();
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	return 0;
+}
+
+void ds1603_set_trimmer(unsigned int trimval)
+{
+	rtc_init_op();
+	rtc_write_byte(((trimval << TRIMMER_SHIFT) & TRIMMER_VALUE_MASK)
+			| (TRIMMER_SET_CMD));
+	rtc_end_op();
+}
+
+void ds1603_disable(void)
+{
+	ds1603_set_trimmer(TRIMMER_DISABLE_RTC);
+}
+
+void ds1603_enable(void)
+{
+	ds1603_set_trimmer(TRIMMER_DEFAULT);
+}
diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h
new file mode 100644
index 000000000000..c2e5c76a379d
--- /dev/null
+++ b/arch/mips/lasat/ds1603.h
@@ -0,0 +1,33 @@
+/*
+ * Dallas Semiconductors 1603 RTC driver
+ *
+ * Brian Murphy <brian@murphy.dk>
+ *
+ */
+#ifndef __DS1603_H
+#define __DS1603_H
+
+struct ds_defs {
+	volatile u32 *reg;
+	volatile u32 *data_reg;
+	u32 rst;
+	u32 clk;
+	u32 data;
+	u32 data_read_shift;
+	char data_reversed;
+	u32 huge_delay;
+};
+
+extern struct ds_defs *ds1603;
+
+unsigned long ds1603_read(void);
+int ds1603_set(unsigned long);
+void ds1603_set_trimmer(unsigned int);
+void ds1603_enable(void);
+void ds1603_disable(void);
+void ds1603_init(struct ds_defs *);
+
+#define TRIMMER_DEFAULT	3
+#define TRIMMER_DISABLE_RTC 0
+
+#endif
diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
new file mode 100644
index 000000000000..5332449ec040
--- /dev/null
+++ b/arch/mips/lasat/image/Makefile
@@ -0,0 +1,54 @@
+#
+# MAKEFILE FOR THE MIPS LINUX BOOTLOADER AND ROM DEBUGGER
+#
+# i-data Networks
+#
+# Author: Thomas Horsten <thh@i-data.com>
+#
+
+ifndef Version
+ Version = "$(USER)-test"
+endif
+
+MKLASATIMG = mklasatimg
+MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
+KERNEL_IMAGE = $(TOPDIR)/vmlinux
+KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ )
+KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ )
+
+LDSCRIPT= -L$(obj) -Tromscript.normal
+
+HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
+		-D_kernel_entry=0x$(KERNEL_ENTRY) \
+		-D VERSION="\"$(Version)\"" \
+		-D TIMESTAMP=$(shell date +%s)
+
+$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
+	$(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $<
+
+OBJECTS = head.o kImage.o
+
+rom.sw:	$(obj)/rom.sw
+rom.bin:	$(obj)/rom.bin
+
+$(obj)/rom.sw:	$(obj)/rom.bin
+	$(MKLASATIMG) -o $@ -k $^ -m $(MKLASATIMG_ARCH)
+
+$(obj)/rom.bin: $(obj)/rom
+	$(OBJCOPY) -O binary -S $^ $@
+
+# Rule to make the bootloader
+$(obj)/rom: $(addprefix $(obj)/,$(OBJECTS))
+	$(LD) $(LDFLAGS) $(LDSCRIPT) -o $@ $^
+
+$(obj)/%.o: $(obj)/%.gz
+	$(LD) -r -o $@ -b binary $<
+
+$(obj)/%.gz: $(obj)/%.bin
+	gzip -cf -9 $< > $@
+
+$(obj)/kImage.bin: $(KERNEL_IMAGE)
+	$(OBJCOPY) -O binary -S $^ $@
+
+clean:
+	rm -f rom rom.bin rom.sw kImage.bin kImage.o
diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S
new file mode 100644
index 000000000000..efb95f2609c2
--- /dev/null
+++ b/arch/mips/lasat/image/head.S
@@ -0,0 +1,31 @@
+#include <asm/lasat/head.h>
+
+	.text
+	.section .text.start, "ax"
+	.set noreorder
+	.set mips3
+
+	/* Magic words identifying a software image */
+	.word	LASAT_K_MAGIC0_VAL
+	.word 	LASAT_K_MAGIC1_VAL
+
+	/* Image header version */
+	.word	0x00000002
+
+	/* image start and size */
+	.word	_image_start
+	.word	_image_size
+
+	/* start of kernel and entrypoint in uncompressed image */
+	.word	_kernel_start
+	.word	_kernel_entry
+
+	/* Here we have room for future flags */
+
+	.org	0x40
+reldate:
+	.word	TIMESTAMP
+
+	.org	0x50
+release:
+	.string VERSION
diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal
new file mode 100644
index 000000000000..988f8ad189cb
--- /dev/null
+++ b/arch/mips/lasat/image/romscript.normal
@@ -0,0 +1,23 @@
+OUTPUT_ARCH(mips)
+
+SECTIONS
+{
+  .text :
+  {
+    *(.text.start)
+  }
+
+  /* Data in ROM */
+
+  .data ALIGN(0x10) :
+  {
+    *(.data)
+  }
+  _image_start = ADDR(.data);
+  _image_size = SIZEOF(.data);
+
+  .other :
+  {
+    *(.*)
+  }
+}
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
new file mode 100644
index 000000000000..5f35289bfff5
--- /dev/null
+++ b/arch/mips/lasat/interrupt.c
@@ -0,0 +1,130 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines for generic manipulation of the interrupts found on the
+ * Lasat boards.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/bootinfo.h>
+#include <asm/lasat/lasatint.h>
+#include <asm/time.h>
+#include <asm/gdb-stub.h>
+
+static volatile int *lasat_int_status;
+static volatile int *lasat_int_mask;
+static volatile int lasat_int_mask_shift;
+
+void disable_lasat_irq(unsigned int irq_nr)
+{
+	*lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
+}
+
+void enable_lasat_irq(unsigned int irq_nr)
+{
+	*lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
+}
+
+static struct irq_chip lasat_irq_type = {
+	.name = "Lasat",
+	.ack = disable_lasat_irq,
+	.mask = disable_lasat_irq,
+	.mask_ack = disable_lasat_irq,
+	.unmask = enable_lasat_irq,
+};
+
+static inline int ls1bit32(unsigned int x)
+{
+	int b = 31, s;
+
+	s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
+	s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
+	s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
+	s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
+	s =  1; if (x <<  1 == 0) s = 0; b -= s;
+
+	return b;
+}
+
+static unsigned long (*get_int_status)(void);
+
+static unsigned long get_int_status_100(void)
+{
+	return *lasat_int_status & *lasat_int_mask;
+}
+
+static unsigned long get_int_status_200(void)
+{
+	unsigned long int_status;
+
+	int_status = *lasat_int_status;
+	int_status &= (int_status >> LASATINT_MASK_SHIFT_200) & 0xffff;
+	return int_status;
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned long int_status;
+	unsigned int cause = read_c0_cause();
+	int irq;
+
+	if (cause & CAUSEF_IP7) {	/* R4000 count / compare IRQ */
+		ll_timer_interrupt(7);
+		return;
+	}
+
+	int_status = get_int_status();
+
+	/* if int_status == 0, then the interrupt has already been cleared */
+	if (int_status) {
+		irq = ls1bit32(int_status);
+
+		do_IRQ(irq);
+	}
+}
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	switch (mips_machtype) {
+	case MACH_LASAT_100:
+		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
+		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
+		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
+		get_int_status = get_int_status_100;
+		*lasat_int_mask = 0;
+		break;
+	case MACH_LASAT_200:
+		lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
+		lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
+		lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
+		get_int_status = get_int_status_200;
+		*lasat_int_mask &= 0xffff;
+		break;
+	default:
+		panic("arch_init_irq: mips_machtype incorrect");
+	}
+
+	for (i = 0; i <= LASATINT_END; i++)
+		set_irq_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
+}
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
new file mode 100644
index 000000000000..ec2f658c3709
--- /dev/null
+++ b/arch/mips/lasat/lasat_board.c
@@ -0,0 +1,280 @@
+/*
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines specific to the LASAT boards
+ */
+#include <linux/types.h>
+#include <linux/crc32.h>
+#include <asm/lasat/lasat.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include "at93c.h"
+/* New model description table */
+#include "lasat_models.h"
+
+#define EEPROM_CRC(data, len) (~crc32(~0, data, len))
+
+struct lasat_info lasat_board_info;
+
+void update_bcastaddr(void);
+
+int EEPROMRead(unsigned int pos, unsigned char *data, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		*data++ = at93c_read(pos++);
+
+	return 0;
+}
+
+int EEPROMWrite(unsigned int pos, unsigned char *data, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		at93c_write(pos++, *data++);
+
+	return 0;
+}
+
+static void init_flash_sizes(void)
+{
+	unsigned long *lb = lasat_board_info.li_flashpart_base;
+	unsigned long *ls = lasat_board_info.li_flashpart_size;
+	int i;
+
+	ls[LASAT_MTD_BOOTLOADER] = 0x40000;
+	ls[LASAT_MTD_SERVICE] = 0xC0000;
+	ls[LASAT_MTD_NORMAL] = 0x100000;
+
+	if (mips_machtype == MACH_LASAT_100) {
+		lasat_board_info.li_flash_base = 0x1e000000;
+
+		lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
+
+		if (lasat_board_info.li_flash_size > 0x200000) {
+			ls[LASAT_MTD_CONFIG] = 0x100000;
+			ls[LASAT_MTD_FS] = 0x500000;
+		}
+	} else {
+		lasat_board_info.li_flash_base = 0x10000000;
+
+		if (lasat_board_info.li_flash_size < 0x1000000) {
+			lb[LASAT_MTD_BOOTLOADER] = 0x10000000;
+			ls[LASAT_MTD_CONFIG] = 0x100000;
+			if (lasat_board_info.li_flash_size >= 0x400000)
+				ls[LASAT_MTD_FS] =
+				     lasat_board_info.li_flash_size - 0x300000;
+		}
+	}
+
+	for (i = 1; i < LASAT_MTD_LAST; i++)
+		lb[i] = lb[i-1] + ls[i-1];
+}
+
+int lasat_init_board_info(void)
+{
+	int c;
+	unsigned long crc;
+	unsigned long cfg0, cfg1;
+	const struct product_info   *ppi;
+	int i_n_base_models = N_BASE_MODELS;
+	const char * const * i_txt_base_models = txt_base_models;
+	int i_n_prids = N_PRIDS;
+
+	memset(&lasat_board_info, 0, sizeof(lasat_board_info));
+
+	/* First read the EEPROM info */
+	EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
+		   sizeof(struct lasat_eeprom_struct));
+
+	/* Check the CRC */
+	crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
+		    sizeof(struct lasat_eeprom_struct) - 4);
+
+	if (crc != lasat_board_info.li_eeprom_info.crc32) {
+		printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does "
+		       "not match calculated, attempting to soldier on...\n");
+	}
+
+	if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION) {
+		printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version "
+		       "%d, wanted version %d, attempting to soldier on...\n",
+		       (unsigned int)lasat_board_info.li_eeprom_info.version,
+		       LASAT_EEPROM_VERSION);
+	}
+
+	cfg0 = lasat_board_info.li_eeprom_info.cfg[0];
+	cfg1 = lasat_board_info.li_eeprom_info.cfg[1];
+
+	if (LASAT_W0_DSCTYPE(cfg0) != 1) {
+		printk(KERN_WARNING "WARNING...\nWARNING...\n"
+		       "Invalid configuration read from EEPROM, attempting to "
+		       "soldier on...");
+	}
+	/* We have a valid configuration */
+
+	switch (LASAT_W0_SDRAMBANKSZ(cfg0)) {
+	case 0:
+		lasat_board_info.li_memsize = 0x0800000;
+		break;
+	case 1:
+		lasat_board_info.li_memsize = 0x1000000;
+		break;
+	case 2:
+		lasat_board_info.li_memsize = 0x2000000;
+		break;
+	case 3:
+		lasat_board_info.li_memsize = 0x4000000;
+		break;
+	case 4:
+		lasat_board_info.li_memsize = 0x8000000;
+		break;
+	default:
+		lasat_board_info.li_memsize = 0;
+	}
+
+	switch (LASAT_W0_SDRAMBANKS(cfg0)) {
+	case 0:
+		break;
+	case 1:
+		lasat_board_info.li_memsize *= 2;
+		break;
+	default:
+		break;
+	}
+
+	switch (LASAT_W0_BUSSPEED(cfg0)) {
+	case 0x0:
+		lasat_board_info.li_bus_hz = 60000000;
+		break;
+	case 0x1:
+		lasat_board_info.li_bus_hz = 66000000;
+		break;
+	case 0x2:
+		lasat_board_info.li_bus_hz = 66666667;
+		break;
+	case 0x3:
+		lasat_board_info.li_bus_hz = 80000000;
+		break;
+	case 0x4:
+		lasat_board_info.li_bus_hz = 83333333;
+		break;
+	case 0x5:
+		lasat_board_info.li_bus_hz = 100000000;
+		break;
+	}
+
+	switch (LASAT_W0_CPUCLK(cfg0)) {
+	case 0x0:
+		lasat_board_info.li_cpu_hz =
+			lasat_board_info.li_bus_hz;
+		break;
+	case 0x1:
+		lasat_board_info.li_cpu_hz =
+			lasat_board_info.li_bus_hz +
+			(lasat_board_info.li_bus_hz >> 1);
+		break;
+	case 0x2:
+		lasat_board_info.li_cpu_hz =
+			lasat_board_info.li_bus_hz +
+			lasat_board_info.li_bus_hz;
+		break;
+	case 0x3:
+		lasat_board_info.li_cpu_hz =
+			lasat_board_info.li_bus_hz +
+			lasat_board_info.li_bus_hz +
+			(lasat_board_info.li_bus_hz >> 1);
+		break;
+	case 0x4:
+		lasat_board_info.li_cpu_hz =
+			lasat_board_info.li_bus_hz +
+			lasat_board_info.li_bus_hz +
+			lasat_board_info.li_bus_hz;
+		break;
+	}
+
+	/* Flash size */
+	switch (LASAT_W1_FLASHSIZE(cfg1)) {
+	case 0:
+		lasat_board_info.li_flash_size = 0x200000;
+		break;
+	case 1:
+		lasat_board_info.li_flash_size = 0x400000;
+		break;
+	case 2:
+		lasat_board_info.li_flash_size = 0x800000;
+		break;
+	case 3:
+		lasat_board_info.li_flash_size = 0x1000000;
+		break;
+	case 4:
+		lasat_board_info.li_flash_size = 0x2000000;
+		break;
+	}
+
+	init_flash_sizes();
+
+	lasat_board_info.li_bmid = LASAT_W0_BMID(cfg0);
+	lasat_board_info.li_prid = lasat_board_info.li_eeprom_info.prid;
+	if (lasat_board_info.li_prid == 0xffff || lasat_board_info.li_prid == 0)
+		lasat_board_info.li_prid = lasat_board_info.li_bmid;
+
+	/* Base model stuff */
+	if (lasat_board_info.li_bmid > i_n_base_models)
+		lasat_board_info.li_bmid = i_n_base_models;
+	strcpy(lasat_board_info.li_bmstr,
+	       i_txt_base_models[lasat_board_info.li_bmid]);
+
+	/* Product ID dependent values */
+	c = lasat_board_info.li_prid;
+	if (c >= i_n_prids) {
+		strcpy(lasat_board_info.li_namestr, "Unknown Model");
+		strcpy(lasat_board_info.li_typestr, "Unknown Type");
+	} else {
+		ppi = &vendor_info_table[0].vi_product_info[c];
+		strcpy(lasat_board_info.li_namestr, ppi->pi_name);
+		if (ppi->pi_type)
+			strcpy(lasat_board_info.li_typestr, ppi->pi_type);
+		else
+			sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
+	}
+
+#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL)
+	update_bcastaddr();
+#endif
+
+	return 0;
+}
+
+void lasat_write_eeprom_info(void)
+{
+	unsigned long crc;
+
+	/* Generate the CRC */
+	crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
+		    sizeof(struct lasat_eeprom_struct) - 4);
+	lasat_board_info.li_eeprom_info.crc32 = crc;
+
+	/* Write the EEPROM info */
+	EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
+		    sizeof(struct lasat_eeprom_struct));
+}
diff --git a/arch/mips/lasat/lasat_models.h b/arch/mips/lasat/lasat_models.h
new file mode 100644
index 000000000000..e1cbd26ae1b3
--- /dev/null
+++ b/arch/mips/lasat/lasat_models.h
@@ -0,0 +1,67 @@
+/*
+ * Model description tables
+ */
+#include <linux/kernel.h>
+
+struct product_info {
+	const char     *pi_name;
+	const char     *pi_type;
+};
+
+struct vendor_info {
+	const char     *vi_name;
+	const struct product_info *vi_product_info;
+};
+
+/*
+ * Base models
+ */
+static const char * const txt_base_models[] = {
+	"MQ 2", "MQ Pro", "SP 25", "SP 50", "SP 100", "SP 5000", "SP 7000",
+	"SP 1000", "Unknown"
+};
+#define N_BASE_MODELS (ARRAY_SIZE(txt_base_models) - 1)
+
+/*
+ * Eicon Networks
+ */
+static const char txt_en_mq[] = "Masquerade";
+static const char txt_en_sp[] = "Safepipe";
+
+static const struct product_info product_info_eicon[] = {
+	{ txt_en_mq, "II"   }, /*  0 */
+	{ txt_en_mq, "Pro"  }, /*  1 */
+	{ txt_en_sp, "25"   }, /*  2 */
+	{ txt_en_sp, "50"   }, /*  3 */
+	{ txt_en_sp, "100"  }, /*  4 */
+	{ txt_en_sp, "5000" }, /*  5 */
+	{ txt_en_sp, "7000" }, /*  6 */
+	{ txt_en_sp, "30"   }, /*  7 */
+	{ txt_en_sp, "5100" }, /*  8 */
+	{ txt_en_sp, "7100" }, /*  9 */
+	{ txt_en_sp, "1110" }, /* 10 */
+	{ txt_en_sp, "3020" }, /* 11 */
+	{ txt_en_sp, "3030" }, /* 12 */
+	{ txt_en_sp, "5020" }, /* 13 */
+	{ txt_en_sp, "5030" }, /* 14 */
+	{ txt_en_sp, "1120" }, /* 15 */
+	{ txt_en_sp, "1130" }, /* 16 */
+	{ txt_en_sp, "6010" }, /* 17 */
+	{ txt_en_sp, "6110" }, /* 18 */
+	{ txt_en_sp, "6210" }, /* 19 */
+	{ txt_en_sp, "1020" }, /* 20 */
+	{ txt_en_sp, "1040" }, /* 21 */
+	{ txt_en_sp, "1050" }, /* 22 */
+	{ txt_en_sp, "1060" }, /* 23 */
+};
+
+#define N_PRIDS ARRAY_SIZE(product_info_eicon)
+
+/*
+ * The vendor table
+ */
+static struct vendor_info const vendor_info_table[] = {
+	{ "Eicon Networks",	product_info_eicon   },
+};
+
+#define N_VENDORS ARRAY_SIZE(vendor_info_table)
diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c
new file mode 100644
index 000000000000..6471d0663fd8
--- /dev/null
+++ b/arch/mips/lasat/picvue.c
@@ -0,0 +1,244 @@
+/*
+ * Picvue PVC160206 display driver
+ *
+ * Brian Murphy <brian@murphy.dk>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <asm/bootinfo.h>
+#include <asm/lasat/lasat.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+
+#include "picvue.h"
+
+#define PVC_BUSY		0x80
+#define PVC_NLINES		2
+#define PVC_DISPMEM		80
+#define PVC_LINELEN		PVC_DISPMEM / PVC_NLINES
+
+struct pvc_defs *picvue;
+
+DECLARE_MUTEX(pvc_sem);
+
+static void pvc_reg_write(u32 val)
+{
+	*picvue->reg = val;
+}
+
+static u32 pvc_reg_read(void)
+{
+	u32 tmp = *picvue->reg;
+	return tmp;
+}
+
+static void pvc_write_byte(u32 data, u8 byte)
+{
+	data |= picvue->e;
+	pvc_reg_write(data);
+	data &= ~picvue->data_mask;
+	data |= byte << picvue->data_shift;
+	pvc_reg_write(data);
+	ndelay(220);
+	pvc_reg_write(data & ~picvue->e);
+	ndelay(220);
+}
+
+static u8 pvc_read_byte(u32 data)
+{
+	u8 byte;
+
+	data |= picvue->e;
+	pvc_reg_write(data);
+	ndelay(220);
+	byte = (pvc_reg_read() & picvue->data_mask) >> picvue->data_shift;
+	data &= ~picvue->e;
+	pvc_reg_write(data);
+	ndelay(220);
+	return byte;
+}
+
+static u8 pvc_read_data(void)
+{
+	u32 data = pvc_reg_read();
+	u8 byte;
+	data |= picvue->rw;
+	data &= ~picvue->rs;
+	pvc_reg_write(data);
+	ndelay(40);
+	byte = pvc_read_byte(data);
+	data |= picvue->rs;
+	pvc_reg_write(data);
+	return byte;
+}
+
+#define TIMEOUT 1000
+static int pvc_wait(void)
+{
+	int i = TIMEOUT;
+	int err = 0;
+
+	while ((pvc_read_data() & PVC_BUSY) && i)
+		i--;
+	if (i == 0)
+		err = -ETIME;
+
+	return err;
+}
+
+#define MODE_INST 0
+#define MODE_DATA 1
+static void pvc_write(u8 byte, int mode)
+{
+	u32 data = pvc_reg_read();
+	data &= ~picvue->rw;
+	if (mode == MODE_DATA)
+		data |= picvue->rs;
+	else
+		data &= ~picvue->rs;
+	pvc_reg_write(data);
+	ndelay(40);
+	pvc_write_byte(data, byte);
+	if (mode == MODE_DATA)
+		data &= ~picvue->rs;
+	else
+		data |= picvue->rs;
+	pvc_reg_write(data);
+	pvc_wait();
+}
+
+void pvc_write_string(const unsigned char *str, u8 addr, int line)
+{
+	int i = 0;
+
+	if (line > 0 && (PVC_NLINES > 1))
+		addr += 0x40 * line;
+	pvc_write(0x80 | addr, MODE_INST);
+
+	while (*str != 0 && i < PVC_LINELEN) {
+		pvc_write(*str++, MODE_DATA);
+		i++;
+	}
+}
+
+void pvc_write_string_centered(const unsigned char *str, int line)
+{
+	int len = strlen(str);
+	u8 addr;
+
+	if (len > PVC_VISIBLE_CHARS)
+		addr = 0;
+	else
+		addr = (PVC_VISIBLE_CHARS - strlen(str))/2;
+
+	pvc_write_string(str, addr, line);
+}
+
+void pvc_dump_string(const unsigned char *str)
+{
+	int len = strlen(str);
+
+	pvc_write_string(str, 0, 0);
+	if (len > PVC_VISIBLE_CHARS)
+		pvc_write_string(&str[PVC_VISIBLE_CHARS], 0, 1);
+}
+
+#define BM_SIZE			8
+#define MAX_PROGRAMMABLE_CHARS	8
+int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE])
+{
+	int i;
+	int addr;
+
+	if (charnum > MAX_PROGRAMMABLE_CHARS)
+		return -ENOENT;
+
+	addr = charnum * 8;
+	pvc_write(0x40 | addr, MODE_INST);
+
+	for (i = 0; i < BM_SIZE; i++)
+		pvc_write(bitmap[i], MODE_DATA);
+	return 0;
+}
+
+#define FUNC_SET_CMD	0x20
+#define  EIGHT_BYTE	(1 << 4)
+#define  FOUR_BYTE	0
+#define  TWO_LINES	(1 << 3)
+#define  ONE_LINE	0
+#define  LARGE_FONT	(1 << 2)
+#define  SMALL_FONT	0
+
+static void pvc_funcset(u8 cmd)
+{
+	pvc_write(FUNC_SET_CMD | (cmd & (EIGHT_BYTE|TWO_LINES|LARGE_FONT)),
+		  MODE_INST);
+}
+
+#define ENTRYMODE_CMD		0x4
+#define  AUTO_INC		(1 << 1)
+#define  AUTO_DEC		0
+#define  CURSOR_FOLLOWS_DISP	(1 << 0)
+
+static void pvc_entrymode(u8 cmd)
+{
+	pvc_write(ENTRYMODE_CMD | (cmd & (AUTO_INC|CURSOR_FOLLOWS_DISP)),
+		  MODE_INST);
+}
+
+#define DISP_CNT_CMD	0x08
+#define  DISP_OFF	0
+#define  DISP_ON	(1 << 2)
+#define  CUR_ON		(1 << 1)
+#define  CUR_BLINK	(1 << 0)
+void pvc_dispcnt(u8 cmd)
+{
+	pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST);
+}
+
+#define MOVE_CMD	0x10
+#define  DISPLAY	(1 << 3)
+#define  CURSOR		0
+#define  RIGHT		(1 << 2)
+#define  LEFT		0
+void pvc_move(u8 cmd)
+{
+	pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST);
+}
+
+#define CLEAR_CMD	0x1
+void pvc_clear(void)
+{
+	pvc_write(CLEAR_CMD, MODE_INST);
+}
+
+#define HOME_CMD	0x2
+void pvc_home(void)
+{
+	pvc_write(HOME_CMD, MODE_INST);
+}
+
+int pvc_init(void)
+{
+	u8 cmd = EIGHT_BYTE;
+
+	if (PVC_NLINES == 2)
+		cmd |= (SMALL_FONT|TWO_LINES);
+	else
+		cmd |= (LARGE_FONT|ONE_LINE);
+	pvc_funcset(cmd);
+	pvc_dispcnt(DISP_ON);
+	pvc_entrymode(AUTO_INC);
+
+	pvc_clear();
+	pvc_write_string_centered("Display", 0);
+	pvc_write_string_centered("Initialized", 1);
+
+	return 0;
+}
+
+module_init(pvc_init);
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h
new file mode 100644
index 000000000000..2a96bf971897
--- /dev/null
+++ b/arch/mips/lasat/picvue.h
@@ -0,0 +1,48 @@
+/*
+ * Picvue PVC160206 display driver
+ *
+ * Brian Murphy <brian.murphy@eicon.com>
+ *
+ */
+#include <asm/semaphore.h>
+
+struct pvc_defs {
+	volatile u32 *reg;
+	u32 data_shift;
+	u32 data_mask;
+	u32 e;
+	u32 rw;
+	u32 rs;
+};
+
+extern struct pvc_defs *picvue;
+
+#define PVC_NLINES		2
+#define PVC_DISPMEM		80
+#define PVC_LINELEN		PVC_DISPMEM / PVC_NLINES
+#define PVC_VISIBLE_CHARS	16
+
+void pvc_write_string(const unsigned char *str, u8 addr, int line);
+void pvc_write_string_centered(const unsigned char *str, int line);
+void pvc_dump_string(const unsigned char *str);
+
+#define BM_SIZE			8
+#define MAX_PROGRAMMABLE_CHARS	8
+int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]);
+
+void pvc_dispcnt(u8 cmd);
+#define  DISP_OFF	0
+#define  DISP_ON	(1 << 2)
+#define  CUR_ON		(1 << 1)
+#define  CUR_BLINK	(1 << 0)
+
+void pvc_move(u8 cmd);
+#define  DISPLAY	(1 << 3)
+#define  CURSOR		0
+#define  RIGHT		(1 << 2)
+#define  LEFT		0
+
+void pvc_clear(void);
+void pvc_home(void);
+
+extern struct semaphore pvc_sem;
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
new file mode 100644
index 000000000000..9947c1525822
--- /dev/null
+++ b/arch/mips/lasat/picvue_proc.c
@@ -0,0 +1,191 @@
+/*
+ * Picvue PVC160206 display driver
+ *
+ * Brian Murphy <brian.murphy@eicon.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+
+#include <linux/timer.h>
+
+#include "picvue.h"
+
+static char pvc_lines[PVC_NLINES][PVC_LINELEN+1];
+static int pvc_linedata[PVC_NLINES];
+static struct proc_dir_entry *pvc_display_dir;
+static char *pvc_linename[PVC_NLINES] = {"line1", "line2"};
+#define DISPLAY_DIR_NAME "display"
+static int scroll_dir, scroll_interval;
+
+static struct timer_list timer;
+
+static void pvc_display(unsigned long data)
+{
+	int i;
+
+	pvc_clear();
+	for (i = 0; i < PVC_NLINES; i++)
+		pvc_write_string(pvc_lines[i], 0, i);
+}
+
+static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0);
+
+static int pvc_proc_read_line(char *page, char **start,
+			     off_t off, int count,
+			     int *eof, void *data)
+{
+	char *origpage = page;
+	int lineno = *(int *)data;
+
+	if (lineno < 0 || lineno > PVC_NLINES) {
+		printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno);
+		return 0;
+	}
+
+	down(&pvc_sem);
+	page += sprintf(page, "%s\n", pvc_lines[lineno]);
+	up(&pvc_sem);
+
+	return page - origpage;
+}
+
+static int pvc_proc_write_line(struct file *file, const char *buffer,
+			   unsigned long count, void *data)
+{
+	int origcount = count;
+	int lineno = *(int *)data;
+
+	if (lineno < 0 || lineno > PVC_NLINES) {
+		printk(KERN_WARNING "proc_write_line: invalid lineno %d\n",
+		       lineno);
+		return origcount;
+	}
+
+	if (count > PVC_LINELEN)
+		count = PVC_LINELEN;
+
+	if (buffer[count-1] == '\n')
+		count--;
+
+	down(&pvc_sem);
+	strncpy(pvc_lines[lineno], buffer, count);
+	pvc_lines[lineno][count] = '\0';
+	up(&pvc_sem);
+
+	tasklet_schedule(&pvc_display_tasklet);
+
+	return origcount;
+}
+
+static int pvc_proc_write_scroll(struct file *file, const char *buffer,
+			   unsigned long count, void *data)
+{
+	int origcount = count;
+	int cmd = simple_strtol(buffer, NULL, 10);
+
+	down(&pvc_sem);
+	if (scroll_interval != 0)
+		del_timer(&timer);
+
+	if (cmd == 0) {
+		scroll_dir = 0;
+		scroll_interval = 0;
+	} else {
+		if (cmd < 0) {
+			scroll_dir = -1;
+			scroll_interval = -cmd;
+		} else {
+			scroll_dir = 1;
+			scroll_interval = cmd;
+		}
+		add_timer(&timer);
+	}
+	up(&pvc_sem);
+
+	return origcount;
+}
+
+static int pvc_proc_read_scroll(char *page, char **start,
+			     off_t off, int count,
+			     int *eof, void *data)
+{
+	char *origpage = page;
+
+	down(&pvc_sem);
+	page += sprintf(page, "%d\n", scroll_dir * scroll_interval);
+	up(&pvc_sem);
+
+	return page - origpage;
+}
+
+
+void pvc_proc_timerfunc(unsigned long data)
+{
+	if (scroll_dir < 0)
+		pvc_move(DISPLAY|RIGHT);
+	else if (scroll_dir > 0)
+		pvc_move(DISPLAY|LEFT);
+
+	timer.expires = jiffies + scroll_interval;
+	add_timer(&timer);
+}
+
+static void pvc_proc_cleanup(void)
+{
+	int i;
+	for (i = 0; i < PVC_NLINES; i++)
+		remove_proc_entry(pvc_linename[i], pvc_display_dir);
+	remove_proc_entry("scroll", pvc_display_dir);
+	remove_proc_entry(DISPLAY_DIR_NAME, NULL);
+
+	del_timer(&timer);
+}
+
+static int __init pvc_proc_init(void)
+{
+	struct proc_dir_entry *proc_entry;
+	int i;
+
+	pvc_display_dir = proc_mkdir(DISPLAY_DIR_NAME, NULL);
+	if (pvc_display_dir == NULL)
+		goto error;
+
+	for (i = 0; i < PVC_NLINES; i++) {
+		strcpy(pvc_lines[i], "");
+		pvc_linedata[i] = i;
+	}
+	for (i = 0; i < PVC_NLINES; i++) {
+		proc_entry = create_proc_entry(pvc_linename[i], 0644,
+					       pvc_display_dir);
+		if (proc_entry == NULL)
+			goto error;
+
+		proc_entry->read_proc = pvc_proc_read_line;
+		proc_entry->write_proc = pvc_proc_write_line;
+		proc_entry->data = &pvc_linedata[i];
+	}
+	proc_entry = create_proc_entry("scroll", 0644, pvc_display_dir);
+	if (proc_entry == NULL)
+		goto error;
+
+	proc_entry->write_proc = pvc_proc_write_scroll;
+	proc_entry->read_proc = pvc_proc_read_scroll;
+
+	init_timer(&timer);
+	timer.function = pvc_proc_timerfunc;
+
+	return 0;
+error:
+	pvc_proc_cleanup();
+	return -ENOMEM;
+}
+
+module_init(pvc_proc_init);
+module_exit(pvc_proc_cleanup);
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
new file mode 100644
index 000000000000..4b80fffcf262
--- /dev/null
+++ b/arch/mips/lasat/prom.c
@@ -0,0 +1,128 @@
+/*
+ * PROM interface routines.
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <asm/bootinfo.h>
+#include <asm/lasat/lasat.h>
+#include <asm/cpu.h>
+
+#include "at93c.h"
+#include <asm/lasat/eeprom.h>
+#include "prom.h"
+
+#define RESET_VECTOR	0xbfc00000
+#define PROM_JUMP_TABLE_ENTRY(n) (*((u32 *)(RESET_VECTOR + 0x20) + n))
+#define PROM_DISPLAY_ADDR	PROM_JUMP_TABLE_ENTRY(0)
+#define PROM_PUTC_ADDR		PROM_JUMP_TABLE_ENTRY(1)
+#define PROM_MONITOR_ADDR	PROM_JUMP_TABLE_ENTRY(2)
+
+static void null_prom_display(const char *string, int pos, int clear)
+{
+}
+
+static void null_prom_monitor(void)
+{
+}
+
+static void null_prom_putc(char c)
+{
+}
+
+/* these are functions provided by the bootloader */
+static void (*__prom_putc)(char c) = null_prom_putc;
+
+void prom_putchar(char c)
+{
+	__prom_putc(c);
+}
+
+void (*prom_display)(const char *string, int pos, int clear) =
+		null_prom_display;
+void (*prom_monitor)(void) = null_prom_monitor;
+
+unsigned int lasat_ndelay_divider;
+
+static void setup_prom_vectors(void)
+{
+	u32 version = *(u32 *)(RESET_VECTOR + 0x90);
+
+	if (version >= 307) {
+		prom_display = (void *)PROM_DISPLAY_ADDR;
+		__prom_putc = (void *)PROM_PUTC_ADDR;
+		prom_monitor = (void *)PROM_MONITOR_ADDR;
+	}
+	printk(KERN_DEBUG "prom vectors set up\n");
+}
+
+static struct at93c_defs at93c_defs[N_MACHTYPES] = {
+	{
+		.reg		= (void *)AT93C_REG_100,
+		.rdata_reg	= (void *)AT93C_RDATA_REG_100,
+		.rdata_shift	= AT93C_RDATA_SHIFT_100,
+		.wdata_shift	= AT93C_WDATA_SHIFT_100,
+		.cs		= AT93C_CS_M_100,
+		.clk		= AT93C_CLK_M_100
+	}, {
+		.reg		= (void *)AT93C_REG_200,
+		.rdata_reg	= (void *)AT93C_RDATA_REG_200,
+		.rdata_shift	= AT93C_RDATA_SHIFT_200,
+		.wdata_shift	= AT93C_WDATA_SHIFT_200,
+		.cs		= AT93C_CS_M_200,
+		.clk		= AT93C_CLK_M_200
+	},
+};
+
+void __init prom_init(void)
+{
+	int argc = fw_arg0;
+	char **argv = (char **) fw_arg1;
+
+	setup_prom_vectors();
+
+	if (current_cpu_data.cputype == CPU_R5000) {
+		printk(KERN_INFO "LASAT 200 board\n");
+		mips_machtype = MACH_LASAT_200;
+		lasat_ndelay_divider = LASAT_200_DIVIDER;
+	} else {
+		printk(KERN_INFO "LASAT 100 board\n");
+		mips_machtype = MACH_LASAT_100;
+		lasat_ndelay_divider = LASAT_100_DIVIDER;
+	}
+
+	at93c = &at93c_defs[mips_machtype];
+
+	lasat_init_board_info();		/* Read info from EEPROM */
+
+	mips_machgroup = MACH_GROUP_LASAT;
+
+	/* Get the command line */
+	if (argc > 0) {
+		strncpy(arcs_cmdline, argv[0], CL_SIZE-1);
+		arcs_cmdline[CL_SIZE-1] = '\0';
+	}
+
+	/* Set the I/O base address */
+	set_io_port_base(KSEG1);
+
+	/* Set memory regions */
+	ioport_resource.start = 0;
+	ioport_resource.end = 0xffffffff;	/* Wrong, fixme.  */
+
+	add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+const char *get_system_type(void)
+{
+	return lasat_board_info.li_bmstr;
+}
diff --git a/arch/mips/lasat/prom.h b/arch/mips/lasat/prom.h
new file mode 100644
index 000000000000..337acbc27442
--- /dev/null
+++ b/arch/mips/lasat/prom.h
@@ -0,0 +1,7 @@
+#ifndef __PROM_H
+#define __PROM_H
+
+extern void (*prom_display)(const char *string, int pos, int clear);
+extern void (*prom_monitor)(void);
+
+#endif /* __PROM_H */
diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c
new file mode 100644
index 000000000000..b1e7a89fb730
--- /dev/null
+++ b/arch/mips/lasat/reset.c
@@ -0,0 +1,61 @@
+/*
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Reset the LASAT board.
+ */
+#include <linux/kernel.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <asm/lasat/lasat.h>
+
+#include "picvue.h"
+#include "prom.h"
+
+static void lasat_machine_restart(char *command);
+static void lasat_machine_halt(void);
+
+/* Used to set machine to boot in service mode via /proc interface */
+int lasat_boot_to_service;
+
+static void lasat_machine_restart(char *command)
+{
+	local_irq_disable();
+
+	if (lasat_boot_to_service) {
+		*(volatile unsigned int *)0xa0000024 = 0xdeadbeef;
+		*(volatile unsigned int *)0xa00000fc = 0xfedeabba;
+	}
+	*lasat_misc->reset_reg = 0xbedead;
+	for (;;) ;
+}
+
+static void lasat_machine_halt(void)
+{
+	local_irq_disable();
+
+	prom_monitor();
+	for (;;) ;
+}
+
+void lasat_reboot_setup(void)
+{
+	_machine_restart = lasat_machine_restart;
+	_machine_halt = lasat_machine_halt;
+	pm_power_off = lasat_machine_halt;
+}
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
new file mode 100644
index 000000000000..205bd397d75b
--- /dev/null
+++ b/arch/mips/lasat/serial.c
@@ -0,0 +1,94 @@
+/*
+ *  Registration of Lasat UART platform device.
+ *
+ *  Copyright (C) 2007  Brian Murphy <brian@murphy.dk>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/bootinfo.h>
+#include <asm/lasat/lasat.h>
+#include <asm/lasat/serial.h>
+
+static struct resource lasat_serial_res[2] __initdata;
+
+static struct plat_serial8250_port lasat_serial8250_port[] = {
+	{
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF |
+				  UPF_SKIP_TEST,
+	},
+	{},
+};
+
+static __init int lasat_uart_add(void)
+{
+	struct platform_device *pdev;
+	int retval;
+
+	pdev = platform_device_alloc("serial8250", -1);
+	if (!pdev)
+		return -ENOMEM;
+
+	if (mips_machtype == MACH_LASAT_100) {
+		lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100);
+		lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1;
+		lasat_serial_res[0].flags = IORESOURCE_MEM;
+		lasat_serial_res[1].start = LASATINT_UART_100;
+		lasat_serial_res[1].end = LASATINT_UART_100;
+		lasat_serial_res[1].flags = IORESOURCE_IRQ;
+
+		lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_100;
+		lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_100 * 16;
+		lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_100;
+		lasat_serial8250_port[0].irq = LASATINT_UART_100;
+	} else {
+		lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_200);
+		lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_200 * 8 - 1;
+		lasat_serial_res[0].flags = IORESOURCE_MEM;
+		lasat_serial_res[1].start = LASATINT_UART_200;
+		lasat_serial_res[1].end = LASATINT_UART_200;
+		lasat_serial_res[1].flags = IORESOURCE_IRQ;
+
+		lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_200;
+		lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_200 * 16;
+		lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_200;
+		lasat_serial8250_port[0].irq = LASATINT_UART_200;
+	}
+
+	pdev->id = PLAT8250_DEV_PLATFORM;
+	pdev->dev.platform_data = lasat_serial8250_port;
+
+	retval = platform_device_add_resources(pdev, lasat_serial_res, ARRAY_SIZE(lasat_serial_res));
+	if (retval)
+		goto err_free_device;
+
+	retval = platform_device_add(pdev);
+	if (retval)
+		goto err_free_device;
+
+	return 0;
+
+err_free_device:
+	platform_device_put(pdev);
+
+	return retval;
+}
+device_initcall(lasat_uart_add);
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
new file mode 100644
index 000000000000..187e37821d93
--- /dev/null
+++ b/arch/mips/lasat/setup.c
@@ -0,0 +1,158 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ * Brian Murphy <brian@murphy.dk>
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Lasat specific setup.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+
+#include <asm/time.h>
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/lasat/lasat.h>
+#include <asm/lasat/serial.h>
+
+#ifdef CONFIG_PICVUE
+#include <linux/notifier.h>
+#endif
+
+#include "ds1603.h"
+#include <asm/lasat/ds1603.h>
+#include <asm/lasat/picvue.h>
+#include <asm/lasat/eeprom.h>
+
+#include "prom.h"
+
+int lasat_command_line;
+void lasatint_init(void);
+
+extern void lasat_reboot_setup(void);
+extern void pcisetup(void);
+extern void edhac_init(void *, void *, void *);
+extern void addrflt_init(void);
+
+struct lasat_misc lasat_misc_info[N_MACHTYPES] = {
+	{
+		.reset_reg	= (void *)KSEG1ADDR(0x1c840000),
+		.flash_wp_reg	= (void *)KSEG1ADDR(0x1c800000), 2
+	}, {
+		.reset_reg	= (void *)KSEG1ADDR(0x11080000),
+		.flash_wp_reg	= (void *)KSEG1ADDR(0x11000000), 6
+	}
+};
+
+struct lasat_misc *lasat_misc;
+
+#ifdef CONFIG_DS1603
+static struct ds_defs ds_defs[N_MACHTYPES] = {
+	{ (void *)DS1603_REG_100, (void *)DS1603_REG_100,
+		DS1603_RST_100, DS1603_CLK_100, DS1603_DATA_100,
+		DS1603_DATA_SHIFT_100, 0, 0 },
+	{ (void *)DS1603_REG_200, (void *)DS1603_DATA_REG_200,
+		DS1603_RST_200, DS1603_CLK_200, DS1603_DATA_200,
+		DS1603_DATA_READ_SHIFT_200, 1, 2000 }
+};
+#endif
+
+#ifdef CONFIG_PICVUE
+#include "picvue.h"
+static struct pvc_defs pvc_defs[N_MACHTYPES] = {
+	{ (void *)PVC_REG_100, PVC_DATA_SHIFT_100, PVC_DATA_M_100,
+		PVC_E_100, PVC_RW_100, PVC_RS_100 },
+	{ (void *)PVC_REG_200, PVC_DATA_SHIFT_200, PVC_DATA_M_200,
+		PVC_E_200, PVC_RW_200, PVC_RS_200 }
+};
+#endif
+
+static int lasat_panic_display(struct notifier_block *this,
+			     unsigned long event, void *ptr)
+{
+#ifdef CONFIG_PICVUE
+	unsigned char *string = ptr;
+	if (string == NULL)
+		string = "Kernel Panic";
+	pvc_dump_string(string);
+#endif
+	return NOTIFY_DONE;
+}
+
+static int lasat_panic_prom_monitor(struct notifier_block *this,
+			     unsigned long event, void *ptr)
+{
+	prom_monitor();
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block lasat_panic_block[] =
+{
+	{
+		.notifier_call	= lasat_panic_display,
+		.priority	= INT_MAX
+	}, {
+		.notifier_call	= lasat_panic_prom_monitor,
+		.priority	= INT_MIN
+	}
+};
+
+static void lasat_time_init(void)
+{
+	mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+	change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5);
+}
+
+void __init plat_mem_setup(void)
+{
+	int i;
+	lasat_misc  = &lasat_misc_info[mips_machtype];
+#ifdef CONFIG_PICVUE
+	picvue = &pvc_defs[mips_machtype];
+#endif
+
+	/* Set up panic notifier */
+	for (i = 0; i < ARRAY_SIZE(lasat_panic_block); i++)
+		atomic_notifier_chain_register(&panic_notifier_list,
+				&lasat_panic_block[i]);
+
+	lasat_reboot_setup();
+
+	board_time_init = lasat_time_init;
+
+#ifdef CONFIG_DS1603
+	ds1603 = &ds_defs[mips_machtype];
+	rtc_mips_get_time = ds1603_read;
+	rtc_mips_set_time = ds1603_set;
+#endif
+
+#ifdef DYNAMIC_SERIAL_INIT
+	serial_init();
+#endif
+
+	pr_info("Lasat specific initialization complete\n");
+}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
new file mode 100644
index 000000000000..4575a829766d
--- /dev/null
+++ b/arch/mips/lasat/sysctl.c
@@ -0,0 +1,454 @@
+/*
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines specific to the LASAT boards
+ */
+#include <linux/types.h>
+#include <asm/lasat/lasat.h>
+
+#include <linux/module.h>
+#include <linux/sysctl.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/net.h>
+#include <linux/inet.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "sysctl.h"
+#include "ds1603.h"
+
+static DEFINE_MUTEX(lasat_info_mutex);
+
+/* Strategy function to write EEPROM after changing string entry */
+int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
+		void *oldval, size_t *oldlenp,
+		void *newval, size_t newlen)
+{
+	int r;
+
+	mutex_lock(&lasat_info_mutex);
+	r = sysctl_string(table, name,
+			  nlen, oldval, oldlenp, newval, newlen);
+	if (r < 0) {
+		mutex_unlock(&lasat_info_mutex);
+		return r;
+	}
+	if (newval && newlen)
+		lasat_write_eeprom_info();
+	mutex_unlock(&lasat_info_mutex);
+
+	return 1;
+}
+
+
+/* And the same for proc */
+int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
+		       void *buffer, size_t *lenp, loff_t *ppos)
+{
+	int r;
+
+	mutex_lock(&lasat_info_mutex);
+	r = proc_dostring(table, write, filp, buffer, lenp, ppos);
+	if ((!write) || r) {
+		mutex_unlock(&lasat_info_mutex);
+		return r;
+	}
+	lasat_write_eeprom_info();
+	mutex_unlock(&lasat_info_mutex);
+
+	return 0;
+}
+
+/* proc function to write EEPROM after changing int entry */
+int proc_dolasatint(ctl_table *table, int write, struct file *filp,
+		       void *buffer, size_t *lenp, loff_t *ppos)
+{
+	int r;
+
+	mutex_lock(&lasat_info_mutex);
+	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+	if ((!write) || r) {
+		mutex_unlock(&lasat_info_mutex);
+		return r;
+	}
+	lasat_write_eeprom_info();
+	mutex_unlock(&lasat_info_mutex);
+
+	return 0;
+}
+
+static int rtctmp;
+
+#ifdef CONFIG_DS1603
+/* proc function to read/write RealTime Clock */
+int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
+		       void *buffer, size_t *lenp, loff_t *ppos)
+{
+	int r;
+
+	mutex_lock(&lasat_info_mutex);
+	if (!write) {
+		rtctmp = ds1603_read();
+		/* check for time < 0 and set to 0 */
+		if (rtctmp < 0)
+			rtctmp = 0;
+	}
+	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+	if ((!write) || r) {
+		mutex_unlock(&lasat_info_mutex);
+		return r;
+	}
+	ds1603_set(rtctmp);
+	mutex_unlock(&lasat_info_mutex);
+
+	return 0;
+}
+#endif
+
+/* Sysctl for setting the IP addresses */
+int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
+		    void *oldval, size_t *oldlenp,
+		    void *newval, size_t newlen)
+{
+	int r;
+
+	mutex_lock(&lasat_info_mutex);
+	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+	if (r < 0) {
+		mutex_unlock(&lasat_info_mutex);
+		return r;
+	}
+	if (newval && newlen)
+		lasat_write_eeprom_info();
+	mutex_unlock(&lasat_info_mutex);
+
+	return 1;
+}
+
+#ifdef CONFIG_DS1603
+/* Same for RTC */
+int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
+		    void *oldval, size_t *oldlenp,
+		    void *newval, size_t newlen)
+{
+	int r;
+
+	mutex_lock(&lasat_info_mutex);
+	rtctmp = ds1603_read();
+	if (rtctmp < 0)
+		rtctmp = 0;
+	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+	if (r < 0) {
+		mutex_unlock(&lasat_info_mutex);
+		return r;
+	}
+	if (newval && newlen)
+		ds1603_set(rtctmp);
+	mutex_unlock(&lasat_info_mutex);
+
+	return 1;
+}
+#endif
+
+#ifdef CONFIG_INET
+static char lasat_bcastaddr[16];
+
+void update_bcastaddr(void)
+{
+	unsigned int ip;
+
+	ip = (lasat_board_info.li_eeprom_info.ipaddr &
+		lasat_board_info.li_eeprom_info.netmask) |
+		~lasat_board_info.li_eeprom_info.netmask;
+
+	sprintf(lasat_bcastaddr, "%d.%d.%d.%d",
+			(ip)       & 0xff,
+			(ip >>  8) & 0xff,
+			(ip >> 16) & 0xff,
+			(ip >> 24) & 0xff);
+}
+
+static char proc_lasat_ipbuf[32];
+
+/* Parsing of IP address */
+int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
+		       void *buffer, size_t *lenp, loff_t *ppos)
+{
+	unsigned int ip;
+	char *p, c;
+	int len;
+
+	if (!table->data || !table->maxlen || !*lenp ||
+	    (*ppos && !write)) {
+		*lenp = 0;
+		return 0;
+	}
+
+	mutex_lock(&lasat_info_mutex);
+	if (write) {
+		len = 0;
+		p = buffer;
+		while (len < *lenp) {
+			if (get_user(c, p++)) {
+				mutex_unlock(&lasat_info_mutex);
+				return -EFAULT;
+			}
+			if (c == 0 || c == '\n')
+				break;
+			len++;
+		}
+		if (len >= sizeof(proc_lasat_ipbuf)-1)
+			len = sizeof(proc_lasat_ipbuf) - 1;
+		if (copy_from_user(proc_lasat_ipbuf, buffer, len)) {
+			mutex_unlock(&lasat_info_mutex);
+			return -EFAULT;
+		}
+		proc_lasat_ipbuf[len] = 0;
+		*ppos += *lenp;
+		/* Now see if we can convert it to a valid IP */
+		ip = in_aton(proc_lasat_ipbuf);
+		*(unsigned int *)(table->data) = ip;
+		lasat_write_eeprom_info();
+	} else {
+		ip = *(unsigned int *)(table->data);
+		sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d",
+			(ip)       & 0xff,
+			(ip >>  8) & 0xff,
+			(ip >> 16) & 0xff,
+			(ip >> 24) & 0xff);
+		len = strlen(proc_lasat_ipbuf);
+		if (len > *lenp)
+			len = *lenp;
+		if (len)
+			if (copy_to_user(buffer, proc_lasat_ipbuf, len)) {
+				mutex_unlock(&lasat_info_mutex);
+				return -EFAULT;
+			}
+		if (len < *lenp) {
+			if (put_user('\n', ((char *) buffer) + len)) {
+				mutex_unlock(&lasat_info_mutex);
+				return -EFAULT;
+			}
+			len++;
+		}
+		*lenp = len;
+		*ppos += len;
+	}
+	update_bcastaddr();
+	mutex_unlock(&lasat_info_mutex);
+
+	return 0;
+}
+#endif /* defined(CONFIG_INET) */
+
+static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
+				     void *oldval, size_t *oldlenp,
+				     void *newval, size_t newlen)
+{
+	int r;
+
+	mutex_lock(&lasat_info_mutex);
+	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+	if (r < 0) {
+		mutex_unlock(&lasat_info_mutex);
+		return r;
+	}
+
+	if (newval && newlen) {
+		if (name && *name == LASAT_PRID)
+			lasat_board_info.li_eeprom_info.prid = *(int *)newval;
+
+		lasat_write_eeprom_info();
+		lasat_init_board_info();
+	}
+	mutex_unlock(&lasat_info_mutex);
+
+	return 0;
+}
+
+int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp,
+		       void *buffer, size_t *lenp, loff_t *ppos)
+{
+	int r;
+
+	mutex_lock(&lasat_info_mutex);
+	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+	if ((!write) || r) {
+		mutex_unlock(&lasat_info_mutex);
+		return r;
+	}
+	if (filp && filp->f_path.dentry) {
+		if (!strcmp(filp->f_path.dentry->d_name.name, "prid"))
+			lasat_board_info.li_eeprom_info.prid =
+				lasat_board_info.li_prid;
+		if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess"))
+			lasat_board_info.li_eeprom_info.debugaccess =
+				lasat_board_info.li_debugaccess;
+	}
+	lasat_write_eeprom_info();
+	mutex_unlock(&lasat_info_mutex);
+
+	return 0;
+}
+
+extern int lasat_boot_to_service;
+
+#ifdef CONFIG_SYSCTL
+
+static ctl_table lasat_table[] = {
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "cpu-hz",
+		.data		= &lasat_board_info.li_cpu_hz,
+		.maxlen		= sizeof(int),
+		.mode		= 0444,
+		.proc_handler	= &proc_dointvec,
+		.strategy	= &sysctl_intvec
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "bus-hz",
+		.data		= &lasat_board_info.li_bus_hz,
+		.maxlen		= sizeof(int),
+		.mode		= 0444,
+		.proc_handler	= &proc_dointvec,
+		.strategy	= &sysctl_intvec
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "bmid",
+		.data		= &lasat_board_info.li_bmid,
+		.maxlen		= sizeof(int),
+		.mode		= 0444,
+		.proc_handler	= &proc_dointvec,
+		.strategy	= &sysctl_intvec
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "prid",
+		.data		= &lasat_board_info.li_prid,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_lasat_eeprom_value,
+		.strategy	= &sysctl_lasat_eeprom_value
+	},
+#ifdef CONFIG_INET
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "ipaddr",
+		.data		= &lasat_board_info.li_eeprom_info.ipaddr,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_lasat_ip,
+		.strategy	= &sysctl_lasat_intvec
+	},
+	{
+		.ctl_name	= LASAT_NETMASK,
+		.procname	= "netmask",
+		.data		= &lasat_board_info.li_eeprom_info.netmask,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_lasat_ip,
+		.strategy	= &sysctl_lasat_intvec
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "bcastaddr",
+		.data		= &lasat_bcastaddr,
+		.maxlen		= sizeof(lasat_bcastaddr),
+		.mode		= 0600,
+		.proc_handler	= &proc_dostring,
+		.strategy	= &sysctl_string
+	},
+#endif
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "passwd_hash",
+		.data		= &lasat_board_info.li_eeprom_info.passwd_hash,
+		.maxlen		=
+			sizeof(lasat_board_info.li_eeprom_info.passwd_hash),
+		.mode		= 0600,
+		.proc_handler	= &proc_dolasatstring,
+		.strategy	= &sysctl_lasatstring
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "boot-service",
+		.data		= &lasat_boot_to_service,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+		.strategy	= &sysctl_intvec
+	},
+#ifdef CONFIG_DS1603
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "rtc",
+		.data		= &rtctmp,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dolasatrtc,
+		.strategy	= &sysctl_lasat_rtc
+	},
+#endif
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "namestr",
+		.data		= &lasat_board_info.li_namestr,
+		.maxlen		= sizeof(lasat_board_info.li_namestr),
+		.mode		= 0444,
+		.proc_handler	=  &proc_dostring,
+		.strategy	= &sysctl_string
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "typestr",
+		.data		= &lasat_board_info.li_typestr,
+		.maxlen		= sizeof(lasat_board_info.li_typestr),
+		.mode		= 0444,
+		.proc_handler	= &proc_dostring,
+		.strategy	= &sysctl_string
+	},
+	{}
+};
+
+static ctl_table lasat_root_table[] = {
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "lasat",
+		.mode		=  0555,
+		.child		= lasat_table
+	},
+	{}
+};
+
+static int __init lasat_register_sysctl(void)
+{
+	struct ctl_table_header *lasat_table_header;
+
+	lasat_table_header =
+		register_sysctl_table(lasat_root_table);
+
+	return 0;
+}
+
+__initcall(lasat_register_sysctl);
+#endif /* CONFIG_SYSCTL */
diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h
new file mode 100644
index 000000000000..341b97933423
--- /dev/null
+++ b/arch/mips/lasat/sysctl.h
@@ -0,0 +1,24 @@
+/*
+ * LASAT sysctl values
+ */
+
+#ifndef _LASAT_SYSCTL_H
+#define _LASAT_SYSCTL_H
+
+/* /proc/sys/lasat */
+enum {
+	LASAT_CPU_HZ = 1,
+	LASAT_BUS_HZ,
+	LASAT_MODEL,
+	LASAT_PRID,
+	LASAT_IPADDR,
+	LASAT_NETMASK,
+	LASAT_BCAST,
+	LASAT_PASSWORD,
+	LASAT_SBOOT,
+	LASAT_RTC,
+	LASAT_NAMESTR,
+	LASAT_TYPESTR,
+};
+
+#endif /* _LASAT_SYSCTL_H */