Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...

1 files changed, 99 insertions, 150 deletions

diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h
index dfeffba729b7..1eb60903d6f0 100644
--- a/arch/mips/include/uapi/asm/termbits.h
+++ b/arch/mips/include/uapi/asm/termbits.h
@@ -11,11 +11,9 @@
 #ifndef _ASM_TERMBITS_H
 #define _ASM_TERMBITS_H
 
-#include <linux/posix_types.h>
+#include <asm-generic/termbits-common.h>
 
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
+typedef unsigned int	tcflag_t;
 
 /*
  * The ABI says nothing about NCC but seems to use NCCS as
@@ -54,175 +52,126 @@ struct ktermios {
 };
 
 /* c_cc characters */
-#define VINTR		 0		/* Interrupt character [ISIG].	*/
-#define VQUIT		 1		/* Quit character [ISIG].  */
-#define VERASE		 2		/* Erase character [ICANON].  */
-#define VKILL		 3		/* Kill-line character [ICANON].  */
-#define VMIN		 4		/* Minimum number of bytes read at once [!ICANON].  */
-#define VTIME		 5		/* Time-out value (tenths of a second) [!ICANON].  */
-#define VEOL2		 6		/* Second EOL character [ICANON].  */
+#define VINTR		 0		/* Interrupt character [ISIG] */
+#define VQUIT		 1		/* Quit character [ISIG] */
+#define VERASE		 2		/* Erase character [ICANON] */
+#define VKILL		 3		/* Kill-line character [ICANON] */
+#define VMIN		 4		/* Minimum number of bytes read at once [!ICANON] */
+#define VTIME		 5		/* Time-out value (tenths of a second) [!ICANON] */
+#define VEOL2		 6		/* Second EOL character [ICANON] */
 #define VSWTC		 7		/* ??? */
 #define VSWTCH		VSWTC
-#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF].  */
-#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF].  */
-#define VSUSP		10		/* Suspend character [ISIG].  */
+#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF] */
+#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF] */
+#define VSUSP		10		/* Suspend character [ISIG] */
 #if 0
 /*
  * VDSUSP is not supported
  */
-#define VDSUSP		11		/* Delayed suspend character [ISIG].  */
+#define VDSUSP		11		/* Delayed suspend character [ISIG] */
 #endif
-#define VREPRINT	12		/* Reprint-line character [ICANON].  */
-#define VDISCARD	13		/* Discard character [IEXTEN].	*/
-#define VWERASE		14		/* Word-erase character [ICANON].  */
-#define VLNEXT		15		/* Literal-next character [IEXTEN].  */
-#define VEOF		16		/* End-of-file character [ICANON].  */
-#define VEOL		17		/* End-of-line character [ICANON].  */
+#define VREPRINT	12		/* Reprint-line character [ICANON] */
+#define VDISCARD	13		/* Discard character [IEXTEN] */
+#define VWERASE		14		/* Word-erase character [ICANON] */
+#define VLNEXT		15		/* Literal-next character [IEXTEN] */
+#define VEOF		16		/* End-of-file character [ICANON] */
+#define VEOL		17		/* End-of-line character [ICANON] */
 
 /* c_iflag bits */
-#define IGNBRK	0000001		/* Ignore break condition.  */
-#define BRKINT	0000002		/* Signal interrupt on break.  */
-#define IGNPAR	0000004		/* Ignore characters with parity errors.  */
-#define PARMRK	0000010		/* Mark parity and framing errors.  */
-#define INPCK	0000020		/* Enable input parity check.  */
-#define ISTRIP	0000040		/* Strip 8th bit off characters.  */
-#define INLCR	0000100		/* Map NL to CR on input.  */
-#define IGNCR	0000200		/* Ignore CR.  */
-#define ICRNL	0000400		/* Map CR to NL on input.  */
-#define IUCLC	0001000		/* Map upper case to lower case on input.  */
-#define IXON	0002000		/* Enable start/stop output control.  */
-#define IXANY	0004000		/* Any character will restart after stop.  */
-#define IXOFF	0010000		/* Enable start/stop input control.  */
-#define IMAXBEL 0020000		/* Ring bell when input queue is full.	*/
-#define IUTF8	0040000		/* Input is UTF-8 */
+#define IUCLC	0x0200		/* Map upper case to lower case on input */
+#define IXON	0x0400		/* Enable start/stop output control */
+#define IXOFF	0x1000		/* Enable start/stop input control */
+#define IMAXBEL	0x2000		/* Ring bell when input queue is full */
+#define IUTF8	0x4000		/* Input is UTF-8 */
 
 /* c_oflag bits */
-#define OPOST	0000001		/* Perform output processing.  */
-#define OLCUC	0000002		/* Map lower case to upper case on output.  */
-#define ONLCR	0000004		/* Map NL to CR-NL on output.  */
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define	  NL0	0000000
-#define	  NL1	0000400
-#define CRDLY	0003000
-#define	  CR0	0000000
-#define	  CR1	0001000
-#define	  CR2	0002000
-#define	  CR3	0003000
-#define TABDLY	0014000
-#define	  TAB0	0000000
-#define	  TAB1	0004000
-#define	  TAB2	0010000
-#define	  TAB3	0014000
-#define	  XTABS 0014000
-#define BSDLY	0020000
-#define	  BS0	0000000
-#define	  BS1	0020000
-#define VTDLY	0040000
-#define	  VT0	0000000
-#define	  VT1	0040000
-#define FFDLY	0100000
-#define	  FF0	0000000
-#define	  FF1	0100000
+#define OLCUC	0x00002		/* Map lower case to upper case on output */
+#define ONLCR	0x00004		/* Map NL to CR-NL on output */
+#define NLDLY	0x00100
+#define   NL0	0x00000
+#define   NL1	0x00100
+#define CRDLY	0x00600
+#define   CR0	0x00000
+#define   CR1	0x00200
+#define   CR2	0x00400
+#define   CR3	0x00600
+#define TABDLY	0x01800
+#define   TAB0	0x00000
+#define   TAB1	0x00800
+#define   TAB2	0x01000
+#define   TAB3	0x01800
+#define   XTABS	0x01800
+#define BSDLY	0x02000
+#define   BS0	0x00000
+#define   BS1	0x02000
+#define VTDLY	0x04000
+#define   VT0	0x00000
+#define   VT1	0x04000
+#define FFDLY	0x08000
+#define   FF0	0x00000
+#define   FF1	0x08000
 /*
 #define PAGEOUT ???
 #define WRAP	???
  */
 
 /* c_cflag bit meaning */
-#define CBAUD	0010017
-#define	 B0	0000000		/* hang up */
-#define	 B50	0000001
-#define	 B75	0000002
-#define	 B110	0000003
-#define	 B134	0000004
-#define	 B150	0000005
-#define	 B200	0000006
-#define	 B300	0000007
-#define	 B600	0000010
-#define	 B1200	0000011
-#define	 B1800	0000012
-#define	 B2400	0000013
-#define	 B4800	0000014
-#define	 B9600	0000015
-#define	 B19200 0000016
-#define	 B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060		/* Number of bits per byte (mask).  */
-#define	  CS5	0000000		/* 5 bits per byte.  */
-#define	  CS6	0000020		/* 6 bits per byte.  */
-#define	  CS7	0000040		/* 7 bits per byte.  */
-#define	  CS8	0000060		/* 8 bits per byte.  */
-#define CSTOPB	0000100		/* Two stop bits instead of one.  */
-#define CREAD	0000200		/* Enable receiver.  */
-#define PARENB	0000400		/* Parity enable.  */
-#define PARODD	0001000		/* Odd parity instead of even.	*/
-#define HUPCL	0002000		/* Hang up on last close.  */
-#define CLOCAL	0004000		/* Ignore modem status lines.  */
-#define CBAUDEX 0010000
-#define	   BOTHER 0010000
-#define	   B57600 0010001
-#define	  B115200 0010002
-#define	  B230400 0010003
-#define	  B460800 0010004
-#define	  B500000 0010005
-#define	  B576000 0010006
-#define	  B921600 0010007
-#define	 B1000000 0010010
-#define	 B1152000 0010011
-#define	 B1500000 0010012
-#define	 B2000000 0010013
-#define	 B2500000 0010014
-#define	 B3000000 0010015
-#define	 B3500000 0010016
-#define	 B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000	/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000	/* flow control */
-
-#define IBSHIFT 16		/* Shift from CBAUD to CIBAUD */
+#define CBAUD		0x0000100f
+#define CSIZE		0x00000030	/* Number of bits per byte (mask) */
+#define   CS5		0x00000000	/* 5 bits per byte */
+#define   CS6		0x00000010	/* 6 bits per byte */
+#define   CS7		0x00000020	/* 7 bits per byte */
+#define   CS8		0x00000030	/* 8 bits per byte */
+#define CSTOPB		0x00000040	/* Two stop bits instead of one */
+#define CREAD		0x00000080	/* Enable receiver */
+#define PARENB		0x00000100	/* Parity enable */
+#define PARODD		0x00000200	/* Odd parity instead of even */
+#define HUPCL		0x00000400	/* Hang up on last close */
+#define CLOCAL		0x00000800	/* Ignore modem status lines */
+#define CBAUDEX		0x00001000
+#define BOTHER		0x00001000
+#define     B57600	0x00001001
+#define    B115200	0x00001002
+#define    B230400	0x00001003
+#define    B460800	0x00001004
+#define    B500000	0x00001005
+#define    B576000	0x00001006
+#define    B921600	0x00001007
+#define   B1000000	0x00001008
+#define   B1152000	0x00001009
+#define   B1500000	0x0000100a
+#define   B2000000	0x0000100b
+#define   B2500000	0x0000100c
+#define   B3000000	0x0000100d
+#define   B3500000	0x0000100e
+#define   B4000000	0x0000100f
+#define CIBAUD		0x100f0000	/* input baud rate */
 
 /* c_lflag bits */
-#define ISIG	0000001		/* Enable signals.  */
-#define ICANON	0000002		/* Do erase and kill processing.  */
-#define XCASE	0000004
-#define ECHO	0000010		/* Enable echo.	 */
-#define ECHOE	0000020		/* Visual erase for ERASE.  */
-#define ECHOK	0000040		/* Echo NL after KILL.	*/
-#define ECHONL	0000100		/* Echo NL even if ECHO is off.	 */
-#define NOFLSH	0000200		/* Disable flush after interrupt.  */
-#define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
-#define ECHOCTL 0001000		/* Echo control characters as ^X.  */
-#define ECHOPRT 0002000		/* Hardcopy visual erase.  */
-#define ECHOKE	0004000		/* Visual erase for KILL.  */
-#define FLUSHO	0020000
-#define PENDIN	0040000		/* Retype pending input (state).  */
-#define TOSTOP	0100000		/* Send SIGTTOU for background output.	*/
-#define ITOSTOP TOSTOP
-#define EXTPROC 0200000		/* External processing on pty */
+#define ISIG	0x00001		/* Enable signals */
+#define ICANON	0x00002		/* Do erase and kill processing */
+#define XCASE	0x00004
+#define ECHO	0x00008		/* Enable echo */
+#define ECHOE	0x00010		/* Visual erase for ERASE */
+#define ECHOK	0x00020		/* Echo NL after KILL */
+#define ECHONL	0x00040		/* Echo NL even if ECHO is off */
+#define NOFLSH	0x00080		/* Disable flush after interrupt */
+#define IEXTEN	0x00100		/* Enable DISCARD and LNEXT */
+#define ECHOCTL	0x00200		/* Echo control characters as ^X */
+#define ECHOPRT	0x00400		/* Hardcopy visual erase */
+#define ECHOKE	0x00800		/* Visual erase for KILL */
+#define FLUSHO	0x02000
+#define PENDIN	0x04000		/* Retype pending input (state) */
+#define TOSTOP	0x08000		/* Send SIGTTOU for background output */
+#define ITOSTOP	TOSTOP
+#define EXTPROC	0x10000		/* External processing on pty */
 
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
 #define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
 
-/* tcflow() and TCXONC use these */
-#define TCOOFF		0	/* Suspend output.  */
-#define TCOON		1	/* Restart suspended output.  */
-#define TCIOFF		2	/* Send a STOP character.  */
-#define TCION		3	/* Send a START character.  */
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH	0	/* Discard data received but not yet read.  */
-#define TCOFLUSH	1	/* Discard data written but not yet sent.  */
-#define TCIOFLUSH	2	/* Discard all pending data.  */
-
 /* tcsetattr uses these */
-#define TCSANOW		TCSETS	/* Change immediately.	*/
-#define TCSADRAIN	TCSETSW /* Change when pending output is written.  */
-#define TCSAFLUSH	TCSETSF /* Flush pending input before changing.	 */
+#define TCSANOW		TCSETS	/* Change immediately */
+#define TCSADRAIN	TCSETSW /* Change when pending output is written */
+#define TCSAFLUSH	TCSETSF /* Flush pending input before changing */
 
 #endif /* _ASM_TERMBITS_H */