Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...

6 files changed, 22 insertions, 371 deletions

diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index ff49fc04500c..ab8362e04461 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -36,8 +36,6 @@
 
 #include <asm/octeon/cvmx-config.h>
 
-#include <asm/octeon/cvmx-mdio.h>
-
 #include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-util.h>
 #include <asm/octeon/cvmx-helper-board.h>
@@ -46,17 +44,6 @@
 #include <asm/octeon/cvmx-asxx-defs.h>
 
 /**
- * cvmx_override_board_link_get(int ipd_port) is a function
- * pointer. It is meant to allow customization of the process of
- * talking to a PHY to determine link speed. It is called every
- * time a PHY must be polled for link status. Users should set
- * this pointer to a function before calling any cvmx-helper
- * operations.
- */
-cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) =
-    NULL;
-
-/**
  * Return the MII PHY address associated with the given IPD
  * port. A result of -1 means there isn't a MII capable PHY
  * connected to this port. On chips supporting multiple MII
@@ -222,12 +209,6 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
 cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 {
 	cvmx_helper_link_info_t result;
-	int phy_addr;
-	int is_broadcom_phy = 0;
-
-	/* Give the user a chance to override the processing of this function */
-	if (cvmx_override_board_link_get)
-		return cvmx_override_board_link_get(ipd_port);
 
 	/* Unless we fix it later, all links are defaulted to down */
 	result.u64 = 0;
@@ -263,8 +244,7 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 			result.s.full_duplex = 1;
 			result.s.speed = 1000;
 			return result;
-		} else		/* The other port uses a broadcom PHY */
-			is_broadcom_phy = 1;
+		}
 		break;
 	case CVMX_BOARD_TYPE_BBGW_REF:
 		/* Port 1 on these boards is always Gigabit */
@@ -282,108 +262,7 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 		break;
 	}
 
-	phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
-	if (phy_addr != -1) {
-		if (is_broadcom_phy) {
-			/*
-			 * Below we are going to read SMI/MDIO
-			 * register 0x19 which works on Broadcom
-			 * parts
-			 */
-			int phy_status =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   0x19);
-			switch ((phy_status >> 8) & 0x7) {
-			case 0:
-				result.u64 = 0;
-				break;
-			case 1:
-				result.s.link_up = 1;
-				result.s.full_duplex = 0;
-				result.s.speed = 10;
-				break;
-			case 2:
-				result.s.link_up = 1;
-				result.s.full_duplex = 1;
-				result.s.speed = 10;
-				break;
-			case 3:
-				result.s.link_up = 1;
-				result.s.full_duplex = 0;
-				result.s.speed = 100;
-				break;
-			case 4:
-				result.s.link_up = 1;
-				result.s.full_duplex = 1;
-				result.s.speed = 100;
-				break;
-			case 5:
-				result.s.link_up = 1;
-				result.s.full_duplex = 1;
-				result.s.speed = 100;
-				break;
-			case 6:
-				result.s.link_up = 1;
-				result.s.full_duplex = 0;
-				result.s.speed = 1000;
-				break;
-			case 7:
-				result.s.link_up = 1;
-				result.s.full_duplex = 1;
-				result.s.speed = 1000;
-				break;
-			}
-		} else {
-			/*
-			 * This code assumes we are using a Marvell
-			 * Gigabit PHY. All the speed information can
-			 * be read from register 17 in one
-			 * go. Somebody using a different PHY will
-			 * need to handle it above in the board
-			 * specific area.
-			 */
-			int phy_status =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
-
-			/*
-			 * If the resolve bit 11 isn't set, see if
-			 * autoneg is turned off (bit 12, reg 0). The
-			 * resolve bit doesn't get set properly when
-			 * autoneg is off, so force it.
-			 */
-			if ((phy_status & (1 << 11)) == 0) {
-				int auto_status =
-				    cvmx_mdio_read(phy_addr >> 8,
-						   phy_addr & 0xff, 0);
-				if ((auto_status & (1 << 12)) == 0)
-					phy_status |= 1 << 11;
-			}
-
-			/*
-			 * Only return a link if the PHY has finished
-			 * auto negotiation and set the resolved bit
-			 * (bit 11)
-			 */
-			if (phy_status & (1 << 11)) {
-				result.s.link_up = 1;
-				result.s.full_duplex = ((phy_status >> 13) & 1);
-				switch ((phy_status >> 14) & 3) {
-				case 0: /* 10 Mbps */
-					result.s.speed = 10;
-					break;
-				case 1: /* 100 Mbps */
-					result.s.speed = 100;
-					break;
-				case 2: /* 1 Gbps */
-					result.s.speed = 1000;
-					break;
-				case 3: /* Illegal */
-					result.u64 = 0;
-					break;
-				}
-			}
-		}
-	} else if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
+	if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
 		   || OCTEON_IS_MODEL(OCTEON_CN58XX)
 		   || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
 		/*
@@ -433,176 +312,6 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 }
 
 /**
- * This function as a board specific method of changing the PHY
- * speed, duplex, and auto-negotiation. This programs the PHY and
- * not Octeon. This can be used to force Octeon's links to
- * specific settings.
- *
- * @phy_addr:  The address of the PHY to program
- * @enable_autoneg:
- *		    Non zero if you want to enable auto-negotiation.
- * @link_info: Link speed to program. If the speed is zero and auto-negotiation
- *		    is enabled, all possible negotiation speeds are advertised.
- *
- * Returns Zero on success, negative on failure
- */
-int cvmx_helper_board_link_set_phy(int phy_addr,
-				   cvmx_helper_board_set_phy_link_flags_types_t
-				   link_flags,
-				   cvmx_helper_link_info_t link_info)
-{
-
-	/* Set the flow control settings based on link_flags */
-	if ((link_flags & set_phy_link_flags_flow_control_mask) !=
-	    set_phy_link_flags_flow_control_dont_touch) {
-		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
-		reg_autoneg_adver.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
-		reg_autoneg_adver.s.asymmetric_pause =
-		    (link_flags & set_phy_link_flags_flow_control_mask) ==
-		    set_phy_link_flags_flow_control_enable;
-		reg_autoneg_adver.s.pause =
-		    (link_flags & set_phy_link_flags_flow_control_mask) ==
-		    set_phy_link_flags_flow_control_enable;
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
-				reg_autoneg_adver.u16);
-	}
-
-	/* If speed isn't set and autoneg is on advertise all supported modes */
-	if ((link_flags & set_phy_link_flags_autoneg)
-	    && (link_info.s.speed == 0)) {
-		cvmx_mdio_phy_reg_control_t reg_control;
-		cvmx_mdio_phy_reg_status_t reg_status;
-		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
-		cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
-		cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
-
-		reg_status.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_STATUS);
-		reg_autoneg_adver.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
-		reg_autoneg_adver.s.advert_100base_t4 =
-		    reg_status.s.capable_100base_t4;
-		reg_autoneg_adver.s.advert_10base_tx_full =
-		    reg_status.s.capable_10_full;
-		reg_autoneg_adver.s.advert_10base_tx_half =
-		    reg_status.s.capable_10_half;
-		reg_autoneg_adver.s.advert_100base_tx_full =
-		    reg_status.s.capable_100base_x_full;
-		reg_autoneg_adver.s.advert_100base_tx_half =
-		    reg_status.s.capable_100base_x_half;
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
-				reg_autoneg_adver.u16);
-		if (reg_status.s.capable_extended_status) {
-			reg_extended_status.u16 =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
-			reg_control_1000.u16 =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   CVMX_MDIO_PHY_REG_CONTROL_1000);
-			reg_control_1000.s.advert_1000base_t_full =
-			    reg_extended_status.s.capable_1000base_t_full;
-			reg_control_1000.s.advert_1000base_t_half =
-			    reg_extended_status.s.capable_1000base_t_half;
-			cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-					CVMX_MDIO_PHY_REG_CONTROL_1000,
-					reg_control_1000.u16);
-		}
-		reg_control.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_CONTROL);
-		reg_control.s.autoneg_enable = 1;
-		reg_control.s.restart_autoneg = 1;
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
-	} else if ((link_flags & set_phy_link_flags_autoneg)) {
-		cvmx_mdio_phy_reg_control_t reg_control;
-		cvmx_mdio_phy_reg_status_t reg_status;
-		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
-		cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
-
-		reg_status.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_STATUS);
-		reg_autoneg_adver.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
-		reg_autoneg_adver.s.advert_100base_t4 = 0;
-		reg_autoneg_adver.s.advert_10base_tx_full = 0;
-		reg_autoneg_adver.s.advert_10base_tx_half = 0;
-		reg_autoneg_adver.s.advert_100base_tx_full = 0;
-		reg_autoneg_adver.s.advert_100base_tx_half = 0;
-		if (reg_status.s.capable_extended_status) {
-			reg_control_1000.u16 =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   CVMX_MDIO_PHY_REG_CONTROL_1000);
-			reg_control_1000.s.advert_1000base_t_full = 0;
-			reg_control_1000.s.advert_1000base_t_half = 0;
-		}
-		switch (link_info.s.speed) {
-		case 10:
-			reg_autoneg_adver.s.advert_10base_tx_full =
-			    link_info.s.full_duplex;
-			reg_autoneg_adver.s.advert_10base_tx_half =
-			    !link_info.s.full_duplex;
-			break;
-		case 100:
-			reg_autoneg_adver.s.advert_100base_tx_full =
-			    link_info.s.full_duplex;
-			reg_autoneg_adver.s.advert_100base_tx_half =
-			    !link_info.s.full_duplex;
-			break;
-		case 1000:
-			reg_control_1000.s.advert_1000base_t_full =
-			    link_info.s.full_duplex;
-			reg_control_1000.s.advert_1000base_t_half =
-			    !link_info.s.full_duplex;
-			break;
-		}
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
-				reg_autoneg_adver.u16);
-		if (reg_status.s.capable_extended_status)
-			cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-					CVMX_MDIO_PHY_REG_CONTROL_1000,
-					reg_control_1000.u16);
-		reg_control.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_CONTROL);
-		reg_control.s.autoneg_enable = 1;
-		reg_control.s.restart_autoneg = 1;
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
-	} else {
-		cvmx_mdio_phy_reg_control_t reg_control;
-		reg_control.u16 =
-		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-				   CVMX_MDIO_PHY_REG_CONTROL);
-		reg_control.s.autoneg_enable = 0;
-		reg_control.s.restart_autoneg = 1;
-		reg_control.s.duplex = link_info.s.full_duplex;
-		if (link_info.s.speed == 1000) {
-			reg_control.s.speed_msb = 1;
-			reg_control.s.speed_lsb = 0;
-		} else if (link_info.s.speed == 100) {
-			reg_control.s.speed_msb = 0;
-			reg_control.s.speed_lsb = 1;
-		} else if (link_info.s.speed == 10) {
-			reg_control.s.speed_msb = 0;
-			reg_control.s.speed_lsb = 0;
-		}
-		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
-				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
-	}
-	return 0;
-}
-
-/**
  * This function is called by cvmx_helper_interface_probe() after it
  * determines the number of ports Octeon can support on a specific
  * interface. This function is the per board location to override
@@ -676,48 +385,6 @@ int __cvmx_helper_board_hardware_enable(int interface)
 				       0xc);
 		}
 	} else if (cvmx_sysinfo_get()->board_type ==
-		   CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
-		/*
-		 * Broadcom PHYs require differnet ASX
-		 * clocks. Unfortunately many boards don't define a
-		 * new board Id and simply mangle the
-		 * CN3010_EVB_HS5
-		 */
-		if (interface == 0) {
-			/*
-			 * Some boards use a hacked up bootloader that
-			 * identifies them as CN3010_EVB_HS5
-			 * evaluation boards.  This leads to all kinds
-			 * of configuration problems.  Detect one
-			 * case, and print warning, while trying to do
-			 * the right thing.
-			 */
-			int phy_addr = cvmx_helper_board_get_mii_address(0);
-			if (phy_addr != -1) {
-				int phy_identifier =
-				    cvmx_mdio_read(phy_addr >> 8,
-						   phy_addr & 0xff, 0x2);
-				/* Is it a Broadcom PHY? */
-				if (phy_identifier == 0x0143) {
-					cvmx_dprintf("\n");
-					cvmx_dprintf("ERROR:\n");
-					cvmx_dprintf
-					    ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
-					cvmx_dprintf
-					    ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n");
-					cvmx_dprintf
-					    ("ERROR: All boards require a unique board type to identify them.\n");
-					cvmx_dprintf("ERROR:\n");
-					cvmx_dprintf("\n");
-					cvmx_wait(1000000000);
-					cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX
-						       (0, interface), 5);
-					cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX
-						       (0, interface), 5);
-				}
-			}
-		}
-	} else if (cvmx_sysinfo_get()->board_type ==
 			CVMX_BOARD_TYPE_UBNT_E100) {
 		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
 		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index f59c88ee9b31..671ab1db2727 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -33,8 +33,6 @@
 
 #include <asm/octeon/cvmx-config.h>
 
-
-#include <asm/octeon/cvmx-mdio.h>
 #include <asm/octeon/cvmx-pko.h>
 #include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-board.h>
@@ -243,8 +241,7 @@ int __cvmx_helper_rgmii_enable(int interface)
 	/* enable the ports now */
 	for (port = 0; port < num_ports; port++) {
 		union cvmx_gmxx_prtx_cfg gmx_cfg;
-		cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port
-					  (interface, port));
+
 		gmx_cfg.u64 =
 		    cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface));
 		gmx_cfg.s.en = 1;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 6f9609e63a65..54375340afe8 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -34,7 +34,6 @@
 
 #include <asm/octeon/cvmx-config.h>
 
-#include <asm/octeon/cvmx-mdio.h>
 #include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-board.h>
 
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index a56ee590de1f..d347fe13b666 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -234,8 +234,6 @@ int __cvmx_helper_xaui_enable(int interface)
 	cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64);
 	cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64);
 
-	cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port(interface, 0));
-
 	/* (8) Enable packet reception */
 	xauiMiscCtl.s.gmxeno = 0;
 	cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index ff26d0217b87..6456af642471 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -841,7 +841,6 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
 	int retry_cnt;
 	int retry_loop_cnt;
 	int i;
-	cvmx_helper_link_info_t link_info;
 
 	/* Save values for restore at end */
 	uint64_t prtx_cfg =
@@ -1002,15 +1001,6 @@ fix_ipd_exit:
 		       (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
 		       frame_max);
 	cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0);
-	/* Set link to down so autonegotiation will set it up again */
-	link_info.u64 = 0;
-	cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info);
-
-	/*
-	 * Bring the link back up as autonegotiation is not done in
-	 * user applications.
-	 */
-	cvmx_helper_link_autoconf(FIX_IPD_OUTPORT);
 
 	CVMX_SYNC;
 	if (num_segs)
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 5537f95b28c9..9a2db1c013d9 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -65,7 +65,8 @@ EXPORT_SYMBOL(octeon_should_swizzle_table);
 extern void pci_console_init(const char *arg);
 #endif
 
-static unsigned long long MAX_MEMORY = 512ull << 20;
+static unsigned long long max_memory = ULLONG_MAX;
+static unsigned long long reserve_low_mem;
 
 DEFINE_SEMAPHORE(octeon_bootbus_sem);
 EXPORT_SYMBOL(octeon_bootbus_sem);
@@ -75,7 +76,6 @@ struct octeon_boot_descriptor *octeon_boot_desc_ptr;
 struct cvmx_bootinfo *octeon_bootinfo;
 EXPORT_SYMBOL(octeon_bootinfo);
 
-static unsigned long long RESERVE_LOW_MEM = 0ull;
 #ifdef CONFIG_KEXEC
 #ifdef CONFIG_SMP
 /*
@@ -125,18 +125,18 @@ static void kexec_bootmem_init(uint64_t mem_size, uint32_t low_reserved_bytes)
 	bootmem_desc->major_version = CVMX_BOOTMEM_DESC_MAJ_VER;
 	bootmem_desc->minor_version = CVMX_BOOTMEM_DESC_MIN_VER;
 
-	addr = (OCTEON_DDR0_BASE + RESERVE_LOW_MEM + low_reserved_bytes);
+	addr = (OCTEON_DDR0_BASE + reserve_low_mem + low_reserved_bytes);
 	bootmem_desc->head_addr = 0;
 
 	if (mem_size <= OCTEON_DDR0_SIZE) {
 		__cvmx_bootmem_phy_free(addr,
-				mem_size - RESERVE_LOW_MEM -
+				mem_size - reserve_low_mem -
 				low_reserved_bytes, 0);
 		return;
 	}
 
 	__cvmx_bootmem_phy_free(addr,
-			OCTEON_DDR0_SIZE - RESERVE_LOW_MEM -
+			OCTEON_DDR0_SIZE - reserve_low_mem -
 			low_reserved_bytes, 0);
 
 	mem_size -= OCTEON_DDR0_SIZE;
@@ -857,15 +857,15 @@ void __init prom_init(void)
 
 	/* Default to 64MB in the simulator to speed things up */
 	if (octeon_is_simulation())
-		MAX_MEMORY = 64ull << 20;
+		max_memory = 64ull << 20;
 
 	arg = strstr(arcs_cmdline, "mem=");
 	if (arg) {
-		MAX_MEMORY = memparse(arg + 4, &p);
-		if (MAX_MEMORY == 0)
-			MAX_MEMORY = 32ull << 30;
+		max_memory = memparse(arg + 4, &p);
+		if (max_memory == 0)
+			max_memory = 32ull << 30;
 		if (*p == '@')
-			RESERVE_LOW_MEM = memparse(p + 1, &p);
+			reserve_low_mem = memparse(p + 1, &p);
 	}
 
 	arcs_cmdline[0] = 0;
@@ -875,11 +875,11 @@ void __init prom_init(void)
 			cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
 		if ((strncmp(arg, "MEM=", 4) == 0) ||
 		    (strncmp(arg, "mem=", 4) == 0)) {
-			MAX_MEMORY = memparse(arg + 4, &p);
-			if (MAX_MEMORY == 0)
-				MAX_MEMORY = 32ull << 30;
+			max_memory = memparse(arg + 4, &p);
+			if (max_memory == 0)
+				max_memory = 32ull << 30;
 			if (*p == '@')
-				RESERVE_LOW_MEM = memparse(p + 1, &p);
+				reserve_low_mem = memparse(p + 1, &p);
 #ifdef CONFIG_KEXEC
 		} else if (strncmp(arg, "crashkernel=", 12) == 0) {
 			crashk_size = memparse(arg+12, &p);
@@ -971,13 +971,13 @@ void __init plat_mem_setup(void)
 	 * to consistently work.
 	 */
 	mem_alloc_size = 4 << 20;
-	if (mem_alloc_size > MAX_MEMORY)
-		mem_alloc_size = MAX_MEMORY;
+	if (mem_alloc_size > max_memory)
+		mem_alloc_size = max_memory;
 
 /* Crashkernel ignores bootmem list. It relies on mem=X@Y option */
 #ifdef CONFIG_CRASH_DUMP
-	add_memory_region(RESERVE_LOW_MEM, MAX_MEMORY, BOOT_MEM_RAM);
-	total += MAX_MEMORY;
+	add_memory_region(reserve_low_mem, max_memory, BOOT_MEM_RAM);
+	total += max_memory;
 #else
 #ifdef CONFIG_KEXEC
 	if (crashk_size > 0) {
@@ -992,7 +992,7 @@ void __init plat_mem_setup(void)
 	 */
 	cvmx_bootmem_lock();
 	while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
-		&& (total < MAX_MEMORY)) {
+		&& (total < max_memory)) {
 		memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
 						__pa_symbol(&_end), -1,
 						0x100000,