Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu update from Greg Ungerer:
 "The major change is to remove the arch/m68k/platform directory.  The
  coldfire (and other non-mmu m68k platform) code is moved to the
  arch/m68k level, making them consistent with the traditional m68k
  platforms.

  A couple of other minor miscellaneous fixes as well"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: Fix typo 'COFNIG_MBAR'
  m68knommu: add missing ioport_map() and ioport_unmap()
  m68k/coldfire: remove second asm/mcfclk.h inclusion in m54xx.c
  m68knommu: fix size of address field for 5272 interrupt controller
  m68k: fix crufty 68000 and 68360 intro comments
  m68k: remove the unused arch/m68k/platform directory
  m68k: move non-mmu 68360 platform code
  m68k: move non-mmu 68000 platform code
  m68k: fix crufty ColdFire intro comments
  m68k: move coldfire platform code

1 files changed, 183 insertions, 0 deletions

diff --git a/arch/m68k/68360/config.c b/arch/m68k/68360/config.c
new file mode 100644
index 000000000000..17ec416fed9d
--- /dev/null
+++ b/arch/m68k/68360/config.c
@@ -0,0 +1,183 @@
+/*
+ *  config.c - non-mmu 68360 platform initialization code
+ *
+ *  Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
+ *  Copyright (C) 1993 Hamish Macdonald
+ *  Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <stdarg.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/setup.h>
+#include <asm/pgtable.h>
+#include <asm/machdep.h>
+#include <asm/m68360.h>
+
+#ifdef CONFIG_UCQUICC
+#include <asm/bootstd.h>
+#endif
+
+extern void m360_cpm_reset(void);
+
+// Mask to select if the PLL prescaler is enabled.
+#define MCU_PREEN   ((unsigned short)(0x0001 << 13))
+
+#if defined(CONFIG_UCQUICC)
+#define OSCILLATOR  (unsigned long int)33000000
+#endif
+
+static irq_handler_t timer_interrupt;
+unsigned long int system_clock;
+
+extern QUICC *pquicc;
+
+/* TODO  DON"T Hard Code this */
+/* calculate properly using the right PLL and prescaller */
+// unsigned int system_clock = 33000000l;
+extern unsigned long int system_clock; //In kernel setup.c
+
+
+static irqreturn_t hw_tick(int irq, void *dummy)
+{
+  /* Reset Timer1 */
+  /* TSTAT &= 0; */
+
+  pquicc->timer_ter1 = 0x0002; /* clear timer event */
+
+  return timer_interrupt(irq, dummy);
+}
+
+static struct irqaction m68360_timer_irq = {
+	.name	 = "timer",
+	.flags	 = IRQF_TIMER,
+	.handler = hw_tick,
+};
+
+void hw_timer_init(irq_handler_t handler)
+{
+  unsigned char prescaler;
+  unsigned short tgcr_save;
+
+#if 0
+  /* Restart mode, Enable int, 32KHz, Enable timer */
+  TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
+  /* Set prescaler (Divide 32KHz by 32)*/
+  TPRER = 31;
+  /* Set compare register  32Khz / 32 / 10 = 100 */
+  TCMP = 10;                                                              
+
+  request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
+#endif
+
+  /* General purpose quicc timers: MC68360UM p7-20 */
+
+  /* Set up timer 1 (in [1..4]) to do 100Hz */
+  tgcr_save = pquicc->timer_tgcr & 0xfff0;
+  pquicc->timer_tgcr  = tgcr_save; /* stop and reset timer 1 */
+  /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */
+
+  prescaler = 8;
+  pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */
+                           (unsigned short)((prescaler - 1) << 8);
+    
+  pquicc->timer_tcn1 = 0x0000; /* initial count */
+  /* calculate interval for 100Hz based on the _system_clock: */
+  pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */
+
+  pquicc->timer_ter1 = 0x0003; /* clear timer events */
+
+  timer_interrupt = handler;
+
+  /* enable timer 1 interrupt in CIMR */
+  setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
+
+  /* Start timer 1: */
+  tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001;
+  pquicc->timer_tgcr  = tgcr_save;
+}
+
+int BSP_set_clock_mmss(unsigned long nowtime)
+{
+#if 0
+  short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+
+  tod->second1 = real_seconds / 10;
+  tod->second2 = real_seconds % 10;
+  tod->minute1 = real_minutes / 10;
+  tod->minute2 = real_minutes % 10;
+#endif
+  return 0;
+}
+
+void BSP_reset (void)
+{
+  local_irq_disable();
+  asm volatile (
+    "moveal #_start, %a0;\n"
+    "moveb #0, 0xFFFFF300;\n"
+    "moveal 0(%a0), %sp;\n"
+    "moveal 4(%a0), %a0;\n"
+    "jmp (%a0);\n"
+    );
+}
+
+unsigned char *scc1_hwaddr;
+static int errno;
+
+#if defined (CONFIG_UCQUICC)
+_bsc0(char *, getserialnum)
+_bsc1(unsigned char *, gethwaddr, int, a)
+_bsc1(char *, getbenv, char *, a)
+#endif
+
+
+void __init config_BSP(char *command, int len)
+{
+  unsigned char *p;
+
+  m360_cpm_reset();
+
+  /* Calculate the real system clock value. */
+  {
+     unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr);
+     if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128
+     {
+         int mf = (int)(pquicc->sim_pllcr & 0x0fff);
+         system_clock = (OSCILLATOR / 128) * (mf + 1);
+     }
+     else
+     {
+         int mf = (int)(pquicc->sim_pllcr & 0x0fff);
+         system_clock = (OSCILLATOR) * (mf + 1);
+     }
+  }
+
+  printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
+
+#if defined(CONFIG_UCQUICC) && 0
+  printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
+  p = scc1_hwaddr = gethwaddr(0);
+  printk(KERN_INFO "uCquicc hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+         p[0], p[1], p[2], p[3], p[4], p[5]);
+
+  p = getbenv("APPEND");
+  if (p)
+    strcpy(p,command);
+  else
+    command[0] = 0;
+#else
+  scc1_hwaddr = "\00\01\02\03\04\05";
+#endif
+ 
+  mach_reset = BSP_reset;
+}