Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 560 insertions, 0 deletions

diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
new file mode 100644
index 000000000000..a685994e5c8e
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -0,0 +1,560 @@
+/*
+ * This code largely moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ *
+ * 2004-06-25    Jesper Juhl
+ *      moved mark_offset_tsc below cpufreq_delayed_get to avoid gcc 3.4
+ *      failing to inline.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include <asm/timer.h>
+#include <asm/io.h>
+/* processor.h for distable_tsc flag */
+#include <asm/processor.h>
+
+#include "io_ports.h"
+#include "mach_timer.h"
+
+#include <asm/hpet.h>
+
+#ifdef CONFIG_HPET_TIMER
+static unsigned long hpet_usec_quotient;
+static unsigned long hpet_last;
+static struct timer_opts timer_tsc;
+#endif
+
+static inline void cpufreq_delayed_get(void);
+
+int tsc_disable __initdata = 0;
+
+extern spinlock_t i8253_lock;
+
+static int use_tsc;
+/* Number of usecs that the last interrupt was delayed */
+static int delay_at_last_interrupt;
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+/* convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *		ns = cycles / (freq / ns_per_sec)
+ *		ns = cycles * (ns_per_sec / freq)
+ *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
+ *		ns = cycles * (10^3 / cpu_mhz)
+ *
+ *	Then we use scaling math (suggested by george@mvista.com) to get:
+ *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * cyc2ns_scale / SC
+ *
+ *	And since SC is a constant power of two, we can convert the div
+ *  into a shift.   
+ *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+static unsigned long cyc2ns_scale; 
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+{
+	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+static int count2; /* counter for mark_offset_tsc() */
+
+/* Cached *multiplier* to convert TSC counts to microseconds.
+ * (see the equation below).
+ * Equal to 2^32 * (1 / (clocks per usec) ).
+ * Initialized in time_init.
+ */
+static unsigned long fast_gettimeoffset_quotient;
+
+static unsigned long get_offset_tsc(void)
+{
+	register unsigned long eax, edx;
+
+	/* Read the Time Stamp Counter */
+
+	rdtsc(eax,edx);
+
+	/* .. relative to previous jiffy (32 bits is enough) */
+	eax -= last_tsc_low;	/* tsc_low delta */
+
+	/*
+         * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient
+         *             = (tsc_low delta) * (usecs_per_clock)
+         *             = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy)
+	 *
+	 * Using a mull instead of a divl saves up to 31 clock cycles
+	 * in the critical path.
+         */
+
+	__asm__("mull %2"
+		:"=a" (eax), "=d" (edx)
+		:"rm" (fast_gettimeoffset_quotient),
+		 "0" (eax));
+
+	/* our adjusted time offset in microseconds */
+	return delay_at_last_interrupt + edx;
+}
+
+static unsigned long long monotonic_clock_tsc(void)
+{
+	unsigned long long last_offset, this_offset, base;
+	unsigned seq;
+	
+	/* atomically read monotonic base & last_offset */
+	do {
+		seq = read_seqbegin(&monotonic_lock);
+		last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+		base = monotonic_base;
+	} while (read_seqretry(&monotonic_lock, seq));
+
+	/* Read the Time Stamp Counter */
+	rdtscll(this_offset);
+
+	/* return the value in ns */
+	return base + cycles_2_ns(this_offset - last_offset);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long this_offset;
+
+	/*
+	 * In the NUMA case we dont use the TSC as they are not
+	 * synchronized across all CPUs.
+	 */
+#ifndef CONFIG_NUMA
+	if (!use_tsc)
+#endif
+		/* no locking but a rare wrong value is not a big deal */
+		return jiffies_64 * (1000000000 / HZ);
+
+	/* Read the Time Stamp Counter */
+	rdtscll(this_offset);
+
+	/* return the value in ns */
+	return cycles_2_ns(this_offset);
+}
+
+static void delay_tsc(unsigned long loops)
+{
+	unsigned long bclock, now;
+	
+	rdtscl(bclock);
+	do
+	{
+		rep_nop();
+		rdtscl(now);
+	} while ((now-bclock) < loops);
+}
+
+#ifdef CONFIG_HPET_TIMER
+static void mark_offset_tsc_hpet(void)
+{
+	unsigned long long this_offset, last_offset;
+ 	unsigned long offset, temp, hpet_current;
+
+	write_seqlock(&monotonic_lock);
+	last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	/*
+	 * It is important that these two operations happen almost at
+	 * the same time. We do the RDTSC stuff first, since it's
+	 * faster. To avoid any inconsistencies, we need interrupts
+	 * disabled locally.
+	 */
+	/*
+	 * Interrupts are just disabled locally since the timer irq
+	 * has the SA_INTERRUPT flag set. -arca
+	 */
+	/* read Pentium cycle counter */
+
+	hpet_current = hpet_readl(HPET_COUNTER);
+	rdtsc(last_tsc_low, last_tsc_high);
+
+	/* lost tick compensation */
+	offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+	if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
+		int lost_ticks = (offset - hpet_last) / hpet_tick;
+		jiffies_64 += lost_ticks;
+	}
+	hpet_last = hpet_current;
+
+	/* update the monotonic base value */
+	this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	monotonic_base += cycles_2_ns(this_offset - last_offset);
+	write_sequnlock(&monotonic_lock);
+
+	/* calculate delay_at_last_interrupt */
+	/*
+	 * Time offset = (hpet delta) * ( usecs per HPET clock )
+	 *             = (hpet delta) * ( usecs per tick / HPET clocks per tick)
+	 *             = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
+	 * Where,
+	 * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
+	 */
+	delay_at_last_interrupt = hpet_current - offset;
+	ASM_MUL64_REG(temp, delay_at_last_interrupt,
+			hpet_usec_quotient, delay_at_last_interrupt);
+}
+#endif
+
+
+#ifdef CONFIG_CPU_FREQ
+#include <linux/workqueue.h>
+
+static unsigned int cpufreq_delayed_issched = 0;
+static unsigned int cpufreq_init = 0;
+static struct work_struct cpufreq_delayed_get_work;
+
+static void handle_cpufreq_delayed_get(void *v)
+{
+	unsigned int cpu;
+	for_each_online_cpu(cpu) {
+		cpufreq_get(cpu);
+	}
+	cpufreq_delayed_issched = 0;
+}
+
+/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries
+ * to verify the CPU frequency the timing core thinks the CPU is running
+ * at is still correct.
+ */
+static inline void cpufreq_delayed_get(void) 
+{
+	if (cpufreq_init && !cpufreq_delayed_issched) {
+		cpufreq_delayed_issched = 1;
+		printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n");
+		schedule_work(&cpufreq_delayed_get_work);
+	}
+}
+
+/* If the CPU frequency is scaled, TSC-based delays will need a different
+ * loops_per_jiffy value to function properly.
+ */
+
+static unsigned int  ref_freq = 0;
+static unsigned long loops_per_jiffy_ref = 0;
+
+#ifndef CONFIG_SMP
+static unsigned long fast_gettimeoffset_ref = 0;
+static unsigned long cpu_khz_ref = 0;
+#endif
+
+static int
+time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+		       void *data)
+{
+	struct cpufreq_freqs *freq = data;
+
+	if (val != CPUFREQ_RESUMECHANGE)
+		write_seqlock_irq(&xtime_lock);
+	if (!ref_freq) {
+		ref_freq = freq->old;
+		loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
+#ifndef CONFIG_SMP
+		fast_gettimeoffset_ref = fast_gettimeoffset_quotient;
+		cpu_khz_ref = cpu_khz;
+#endif
+	}
+
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+	    (val == CPUFREQ_RESUMECHANGE)) {
+		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+			cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+#ifndef CONFIG_SMP
+		if (cpu_khz)
+			cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new);
+		if (use_tsc) {
+			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
+				fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
+				set_cyc2ns_scale(cpu_khz/1000);
+			}
+		}
+#endif
+	}
+
+	if (val != CPUFREQ_RESUMECHANGE)
+		write_sequnlock_irq(&xtime_lock);
+
+	return 0;
+}
+
+static struct notifier_block time_cpufreq_notifier_block = {
+	.notifier_call	= time_cpufreq_notifier
+};
+
+
+static int __init cpufreq_tsc(void)
+{
+	int ret;
+	INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL);
+	ret = cpufreq_register_notifier(&time_cpufreq_notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (!ret)
+		cpufreq_init = 1;
+	return ret;
+}
+core_initcall(cpufreq_tsc);
+
+#else /* CONFIG_CPU_FREQ */
+static inline void cpufreq_delayed_get(void) { return; }
+#endif 
+
+static void mark_offset_tsc(void)
+{
+	unsigned long lost,delay;
+	unsigned long delta = last_tsc_low;
+	int count;
+	int countmp;
+	static int count1 = 0;
+	unsigned long long this_offset, last_offset;
+	static int lost_count = 0;
+
+	write_seqlock(&monotonic_lock);
+	last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	/*
+	 * It is important that these two operations happen almost at
+	 * the same time. We do the RDTSC stuff first, since it's
+	 * faster. To avoid any inconsistencies, we need interrupts
+	 * disabled locally.
+	 */
+
+	/*
+	 * Interrupts are just disabled locally since the timer irq
+	 * has the SA_INTERRUPT flag set. -arca
+	 */
+
+	/* read Pentium cycle counter */
+
+	rdtsc(last_tsc_low, last_tsc_high);
+
+	spin_lock(&i8253_lock);
+	outb_p(0x00, PIT_MODE);     /* latch the count ASAP */
+
+	count = inb_p(PIT_CH0);    /* read the latched count */
+	count |= inb(PIT_CH0) << 8;
+
+	/*
+	 * VIA686a test code... reset the latch if count > max + 1
+	 * from timer_pit.c - cjb
+	 */
+	if (count > LATCH) {
+		outb_p(0x34, PIT_MODE);
+		outb_p(LATCH & 0xff, PIT_CH0);
+		outb(LATCH >> 8, PIT_CH0);
+		count = LATCH - 1;
+	}
+
+	spin_unlock(&i8253_lock);
+
+	if (pit_latch_buggy) {
+		/* get center value of last 3 time lutch */
+		if ((count2 >= count && count >= count1)
+		    || (count1 >= count && count >= count2)) {
+			count2 = count1; count1 = count;
+		} else if ((count1 >= count2 && count2 >= count)
+			   || (count >= count2 && count2 >= count1)) {
+			countmp = count;count = count2;
+			count2 = count1;count1 = countmp;
+		} else {
+			count2 = count1; count1 = count; count = count1;
+		}
+	}
+
+	/* lost tick compensation */
+	delta = last_tsc_low - delta;
+	{
+		register unsigned long eax, edx;
+		eax = delta;
+		__asm__("mull %2"
+		:"=a" (eax), "=d" (edx)
+		:"rm" (fast_gettimeoffset_quotient),
+		 "0" (eax));
+		delta = edx;
+	}
+	delta += delay_at_last_interrupt;
+	lost = delta/(1000000/HZ);
+	delay = delta%(1000000/HZ);
+	if (lost >= 2) {
+		jiffies_64 += lost-1;
+
+		/* sanity check to ensure we're not always losing ticks */
+		if (lost_count++ > 100) {
+			printk(KERN_WARNING "Losing too many ticks!\n");
+			printk(KERN_WARNING "TSC cannot be used as a timesource.  \n");
+			printk(KERN_WARNING "Possible reasons for this are:\n");
+			printk(KERN_WARNING "  You're running with Speedstep,\n");
+			printk(KERN_WARNING "  You don't have DMA enabled for your hard disk (see hdparm),\n");
+			printk(KERN_WARNING "  Incorrect TSC synchronization on an SMP system (see dmesg).\n");
+			printk(KERN_WARNING "Falling back to a sane timesource now.\n");
+
+			clock_fallback();
+		}
+		/* ... but give the TSC a fair chance */
+		if (lost_count > 25)
+			cpufreq_delayed_get();
+	} else
+		lost_count = 0;
+	/* update the monotonic base value */
+	this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	monotonic_base += cycles_2_ns(this_offset - last_offset);
+	write_sequnlock(&monotonic_lock);
+
+	/* calculate delay_at_last_interrupt */
+	count = ((LATCH-1) - count) * TICK_SIZE;
+	delay_at_last_interrupt = (count + LATCH/2) / LATCH;
+
+	/* catch corner case where tick rollover occured
+	 * between tsc and pit reads (as noted when
+	 * usec delta is > 90% # of usecs/tick)
+	 */
+	if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
+		jiffies_64++;
+}
+
+static int __init init_tsc(char* override)
+{
+
+	/* check clock override */
+	if (override[0] && strncmp(override,"tsc",3)) {
+#ifdef CONFIG_HPET_TIMER
+		if (is_hpet_enabled()) {
+			printk(KERN_ERR "Warning: clock= override failed. Defaulting to tsc\n");
+		} else
+#endif
+		{
+			return -ENODEV;
+		}
+	}
+
+	/*
+	 * If we have APM enabled or the CPU clock speed is variable
+	 * (CPU stops clock on HLT or slows clock to save power)
+	 * then the TSC timestamps may diverge by up to 1 jiffy from
+	 * 'real time' but nothing will break.
+	 * The most frequent case is that the CPU is "woken" from a halt
+	 * state by the timer interrupt itself, so we get 0 error. In the
+	 * rare cases where a driver would "wake" the CPU and request a
+	 * timestamp, the maximum error is < 1 jiffy. But timestamps are
+	 * still perfectly ordered.
+	 * Note that the TSC counter will be reset if APM suspends
+	 * to disk; this won't break the kernel, though, 'cuz we're
+	 * smart.  See arch/i386/kernel/apm.c.
+	 */
+ 	/*
+ 	 *	Firstly we have to do a CPU check for chips with
+ 	 * 	a potentially buggy TSC. At this point we haven't run
+ 	 *	the ident/bugs checks so we must run this hook as it
+ 	 *	may turn off the TSC flag.
+ 	 *
+ 	 *	NOTE: this doesn't yet handle SMP 486 machines where only
+ 	 *	some CPU's have a TSC. Thats never worked and nobody has
+ 	 *	moaned if you have the only one in the world - you fix it!
+ 	 */
+
+	count2 = LATCH; /* initialize counter for mark_offset_tsc() */
+
+	if (cpu_has_tsc) {
+		unsigned long tsc_quotient;
+#ifdef CONFIG_HPET_TIMER
+		if (is_hpet_enabled()){
+			unsigned long result, remain;
+			printk("Using TSC for gettimeofday\n");
+			tsc_quotient = calibrate_tsc_hpet(NULL);
+			timer_tsc.mark_offset = &mark_offset_tsc_hpet;
+			/*
+			 * Math to calculate hpet to usec multiplier
+			 * Look for the comments at get_offset_tsc_hpet()
+			 */
+			ASM_DIV64_REG(result, remain, hpet_tick,
+					0, KERNEL_TICK_USEC);
+			if (remain > (hpet_tick >> 1))
+				result++; /* rounding the result */
+
+			hpet_usec_quotient = result;
+		} else
+#endif
+		{
+			tsc_quotient = calibrate_tsc();
+		}
+
+		if (tsc_quotient) {
+			fast_gettimeoffset_quotient = tsc_quotient;
+			use_tsc = 1;
+			/*
+			 *	We could be more selective here I suspect
+			 *	and just enable this for the next intel chips ?
+			 */
+			/* report CPU clock rate in Hz.
+			 * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+			 * clock/second. Our precision is about 100 ppm.
+			 */
+			{	unsigned long eax=0, edx=1000;
+				__asm__("divl %2"
+		       		:"=a" (cpu_khz), "=d" (edx)
+        	       		:"r" (tsc_quotient),
+	                	"0" (eax), "1" (edx));
+				printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+			}
+			set_cyc2ns_scale(cpu_khz/1000);
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+#ifndef CONFIG_X86_TSC
+/* disable flag for tsc.  Takes effect by clearing the TSC cpu flag
+ * in cpu/common.c */
+static int __init tsc_setup(char *str)
+{
+	tsc_disable = 1;
+	return 1;
+}
+#else
+static int __init tsc_setup(char *str)
+{
+	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
+				"cannot disable TSC.\n");
+	return 1;
+}
+#endif
+__setup("notsc", tsc_setup);
+
+
+
+/************************************************************/
+
+/* tsc timer_opts struct */
+static struct timer_opts timer_tsc = {
+	.name = "tsc",
+	.mark_offset = mark_offset_tsc, 
+	.get_offset = get_offset_tsc,
+	.monotonic_clock = monotonic_clock_tsc,
+	.delay = delay_tsc,
+};
+
+struct init_timer_opts __initdata timer_tsc_init = {
+	.init = init_tsc,
+	.opts = &timer_tsc,
+};