CRIS: Drop code related to obsolete or unused kconfigs

Drop all code related to Kconfigs that don't exist.
Fix one Kconfig where it was actually typo:ed (ETRAX_KGB_PORT2)
Drop content related to CRIS v32 SoCs from etraxgpio.h headerfile,
all use of GPIO for both ETRAX FS and ARTPEC-3 should now be through
standard gpiolib instead.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

2 files changed, 3 insertions, 117 deletions

diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S
index 4a146e1749c9..a4877a421756 100644
--- a/arch/cris/arch-v10/kernel/head.S
+++ b/arch/cris/arch-v10/kernel/head.S
@@ -354,63 +354,6 @@ no_command_line:
 	blo	1b
 	nop
 
-#ifdef CONFIG_BLK_DEV_ETRAXIDE
-	;; disable ATA before enabling it in genconfig below
-	moveq	0,$r0
-	move.d	$r0,[R_ATA_CTRL_DATA]
-	move.d	$r0,[R_ATA_TRANSFER_CNT]
-	move.d	$r0,[R_ATA_CONFIG]
-#if 0
-	move.d	R_PORT_G_DATA, $r1
-	move.d	$r0, [$r1]; assert ATA bus-reset
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	move.d	0x08000000,$r0
-	move.d	$r0,[$r1]
-#endif
-#endif
-
-#ifdef CONFIG_JULIETTE
-	;; configure external DMA channel 0 before enabling it in genconfig
-
-	moveq	0,$r0
-	move.d	$r0,[R_EXT_DMA_0_ADDR]
-	; cnt enable, word size, output, stop, size 0
-	move.d	  IO_STATE (R_EXT_DMA_0_CMD, cnt, enable)	\
-		| IO_STATE (R_EXT_DMA_0_CMD, rqpol, ahigh)	\
-		| IO_STATE (R_EXT_DMA_0_CMD, apol, ahigh)	\
-		| IO_STATE (R_EXT_DMA_0_CMD, rq_ack, burst)	\
-		| IO_STATE (R_EXT_DMA_0_CMD, wid, word)		\
-		| IO_STATE (R_EXT_DMA_0_CMD, dir, output)	\
-		| IO_STATE (R_EXT_DMA_0_CMD, run, stop)		\
-		| IO_FIELD (R_EXT_DMA_0_CMD, trf_count, 0),$r0
-	move.d	$r0,[R_EXT_DMA_0_CMD]
-
-	;; reset dma4 and wait for completion
-
-	moveq	IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
-	move.b	$r0,[R_DMA_CH4_CMD]
-1:	move.b	[R_DMA_CH4_CMD],$r0
-	and.b	IO_MASK (R_DMA_CH4_CMD, cmd),$r0
-	cmp.b	IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
-	beq	1b
-	nop
-
-	;; reset dma5 and wait for completion
-
-	moveq	IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
-	move.b	$r0,[R_DMA_CH5_CMD]
-1:	move.b	[R_DMA_CH5_CMD],$r0
-	and.b	IO_MASK (R_DMA_CH5_CMD, cmd),$r0
-	cmp.b	IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
-	beq	1b
-	nop
-#endif
-
 	;; Etrax product HW genconfig setup
 
 	moveq	0,$r0
@@ -447,21 +390,6 @@ no_command_line:
 		| IO_STATE (R_GEN_CONFIG, dma9, usb),$r0
 
 
-#if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT)
-        or.d      IO_STATE (R_GEN_CONFIG, g0dir, out),$r0
-#endif
-
-#if defined(CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT)
-        or.d      IO_STATE (R_GEN_CONFIG, g8_15dir, out),$r0
-#endif
-#if defined(CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT)
-       or.d      IO_STATE (R_GEN_CONFIG, g16_23dir, out),$r0
-#endif
-
-#if defined(CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT)
-       or.d      IO_STATE (R_GEN_CONFIG, g24dir, out),$r0
-#endif
-
 	move.d	$r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG
 
 	move.d	$r0,[R_GEN_CONFIG]
@@ -500,19 +428,9 @@ no_command_line:
 	;; including their shadow registers
 
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
-	or.b	IO_STATE (R_PORT_PA_DIR, dir7, output),$r0
-#endif
 	move.b	$r0,[port_pa_dir_shadow]
 	move.b	$r0,[R_PORT_PA_DIR]
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
-#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
-	and.b	~(1 << 7),$r0
-#else
-	or.b	(1 << 7),$r0
-#endif
-#endif
 	move.b	$r0,[port_pa_data_shadow]
 	move.b	$r0,[R_PORT_PA_DATA]
 
@@ -520,19 +438,9 @@ no_command_line:
 	move.b	$r0,[port_pb_config_shadow]
 	move.b	$r0,[R_PORT_PB_CONFIG]
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
-	or.b	IO_STATE (R_PORT_PB_DIR, dir5, output),$r0
-#endif
 	move.b	$r0,[port_pb_dir_shadow]
 	move.b	$r0,[R_PORT_PB_DIR]
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
-#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
-	and.b	~(1 << 5),$r0
-#else
-	or.b	(1 << 5),$r0
-#endif
-#endif
 	move.b	$r0,[port_pb_data_shadow]
 	move.b	$r0,[R_PORT_PB_DATA]
 
@@ -541,20 +449,6 @@ no_command_line:
 	move.d  $r0, [R_PORT_PB_I2C]
 
 	moveq	0,$r0
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G10)
-#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
-	and.d	~(1 << 10),$r0
-#else
-	or.d	(1 << 10),$r0
-#endif
-#endif
-#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G11)
-#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
-	and.d	~(1 << 11),$r0
-#else
-	or.d	(1 << 11),$r0
-#endif
-#endif
 	move.d	$r0,[port_g_data_shadow]
 	move.d	$r0,[R_PORT_G_DATA]
 
diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c
index e7f8066105aa..85e3f1b1f3ac 100644
--- a/arch/cris/arch-v10/mm/init.c
+++ b/arch/cris/arch-v10/mm/init.c
@@ -68,14 +68,10 @@ paging_init(void)
 
 	*R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg  ) |  /* bootrom */
 			IO_STATE(R_MMU_KSEG, seg_e, page ) |
-			IO_STATE(R_MMU_KSEG, seg_d, page ) | 
-			IO_STATE(R_MMU_KSEG, seg_c, page ) |   
+			IO_STATE(R_MMU_KSEG, seg_d, page ) |
+			IO_STATE(R_MMU_KSEG, seg_c, page ) |
 			IO_STATE(R_MMU_KSEG, seg_b, seg  ) |  /* kernel reg area */
-#ifdef CONFIG_JULIETTE
-			IO_STATE(R_MMU_KSEG, seg_a, seg  ) |  /* ARTPEC etc. */
-#else
 			IO_STATE(R_MMU_KSEG, seg_a, page ) |
-#endif
 			IO_STATE(R_MMU_KSEG, seg_9, seg  ) |  /* LED's on some boards */
 			IO_STATE(R_MMU_KSEG, seg_8, seg  ) |  /* CSE0/1, flash and I/O */
 			IO_STATE(R_MMU_KSEG, seg_7, page ) |  /* kernel vmalloc area */
@@ -92,14 +88,10 @@ paging_init(void)
 			    IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) |
 			    IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) |
 			    IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) |
-#ifdef CONFIG_JULIETTE
-			    IO_FIELD(R_MMU_KBASE_HI, base_a, 0xa ) |
-#else
 			    IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) |
-#endif
 			    IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) |
 			    IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) );
-	
+
 	*R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) |
 			    IO_FIELD(R_MMU_KBASE_LO, base_6, 0x4 ) |
 			    IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) |