diff options
| author | Claudiu Beznea <claudiu.beznea@microchip.com> | 2021-09-15 10:48:35 +0300 |
|---|---|---|
| committer | Nicolas Ferre <nicolas.ferre@microchip.com> | 2021-10-04 12:16:58 +0200 |
| commit | 968f6e9d51e2da6eade2afb65629ab87a8a0faf3 (patch) | |
| tree | a261e9e8fba30d6878c5e744c9b9171f5b7dfdc3 /arch/arm | |
| parent | d8d667ee0236dec6d717f27eec690d1324e7f322 (diff) | |
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain
GMAC's MDIO pins should be configured with slew-rate enabled, while the
data + signaling pins should be configured with slew-rate disabled when
GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets
the slew-rate as enabled for all pins. Adapt the device tree to comply
with these.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama7g5ek.dts | 28 |
1 files changed, 22 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index f0772fa01751..30b67cad5f14 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -355,7 +355,10 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>; + pinctrl-0 = <&pinctrl_gmac0_default + &pinctrl_gmac0_mdio_default + &pinctrl_gmac0_txck_default + &pinctrl_gmac0_phy_irq>; phy-mode = "rgmii-id"; status = "okay"; @@ -370,7 +373,9 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>; + pinctrl-0 = <&pinctrl_gmac1_default + &pinctrl_gmac1_mdio_default + &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; status = "okay"; @@ -425,14 +430,20 @@ <PIN_PA15__G0_TXEN>, <PIN_PA30__G0_RXCK>, <PIN_PA18__G0_RXDV>, - <PIN_PA22__G0_MDC>, - <PIN_PA23__G0_MDIO>, <PIN_PA25__G0_125CK>; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac0_mdio_default: gmac0_mdio_default { + pinmux = <PIN_PA22__G0_MDC>, + <PIN_PA23__G0_MDIO>; bias-disable; }; pinctrl_gmac0_txck_default: gmac0_txck_default { pinmux = <PIN_PA24__G0_TXCK>; + slew-rate = <0>; bias-pull-up; }; @@ -449,8 +460,13 @@ <PIN_PD25__G1_RX0>, <PIN_PD26__G1_RX1>, <PIN_PD27__G1_RXER>, - <PIN_PD24__G1_RXDV>, - <PIN_PD28__G1_MDC>, + <PIN_PD24__G1_RXDV>; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac1_mdio_default: gmac1_mdio_default { + pinmux = <PIN_PD28__G1_MDC>, <PIN_PD29__G1_MDIO>; bias-disable; }; |