diff options
| author | Janusz Krzysztofik <jmkrzyszt@gmail.com> | 2019-09-07 13:16:50 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2019-09-09 10:47:24 +0100 |
| commit | 73681f4f1426847b421649c6aa6c2dc303acc7c8 (patch) | |
| tree | d33afa13587d7917f93d1ba49fe9a6140bd96504 /arch/arm | |
| parent | 2ec42f3147e1610716f184b02e65d7f493eed925 (diff) | |
ASoC: ams-delta: Take control over audio mute GPIO pins
Since commit 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused
GPIOs"), on-board audio has appeared muted. It has been discovered that
believed to be unused GPIO pins "hookflash1" and "hookflash2" need to be
set low for audible sound in handsfree and handset mode respectively.
According to Amstrad E3 wiki, the purpose of both pins hasn't been
clearly identified. Original Amstrad software used to produce a high
pulse on them when the phone was taken off hook or recall was pressed.
With the current findings, we can assume the pins provide a kind of
audio mute function, separately for handset and handsfree operation
modes.
Commit 2afdb4c41d78 ("ARM: OMAP1: ams-delta: Fix audio permanently
muted") attempted to fix the issue temporarily by hogging the GPIO pin
"hookflash1" renamed to "audio_mute", however the fix occurred
incomplete as it restored audible sound only for handsfree mode.
Stop hogging that pin, rename the pins to "handsfree_mute" and
"handset_mute" respectively and implement appropriate DAPM event
callbacks for "Speaker" and "Earpiece" DAPM widgets.
Fixes: 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190907111650.15440-1-jmkrzyszt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 36498ea1b2f3..c2affc727967 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -245,8 +245,8 @@ static struct platform_device latch2_gpio_device = { #define LATCH2_PIN_SCARD_CMDVCC 11 #define LATCH2_PIN_MODEM_NRESET 12 #define LATCH2_PIN_MODEM_CODEC 13 -#define LATCH2_PIN_AUDIO_MUTE 14 -#define LATCH2_PIN_HOOKFLASH 15 +#define LATCH2_PIN_HANDSFREE_MUTE 14 +#define LATCH2_PIN_HANDSET_MUTE 15 static struct regulator_consumer_supply modem_nreset_consumers[] = { REGULATOR_SUPPLY("RESET#", "serial8250.1"), @@ -475,6 +475,10 @@ static struct gpiod_lookup_table ams_delta_audio_gpio_table = { "hook_switch", 0), GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_CODEC, "modem_codec", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_HANDSFREE_MUTE, + "handsfree_mute", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_HANDSET_MUTE, + "handset_mute", 0), { }, }, }; @@ -589,8 +593,6 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) static struct gpiod_hog ams_delta_gpio_hogs[] = { GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), - GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute", - GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), {}, }; |