Merge branch 'lpc32xx/multiplatform' into arm/soc

I revisited some older patches here, getting two of the remaining
ARM platforms to build with ARCH_MULTIPLATFORM like most others do.

In case of lpc32xx, I created a new set of patches, which seemed
easier than digging out what I did for an older release many
years ago.

* lpc32xx/multiplatform:
  ARM: lpc32xx: allow multiplatform build
  ARM: lpc32xx: clean up header files
  serial: lpc32xx: allow compile testing
  net: lpc-enet: allow compile testing
  net: lpc-enet: fix printk format strings
  net: lpc-enet: fix badzero.cocci warnings
  net: lpc-enet: move phy setup into platform code
  net: lpc-enet: factor out iram access
  gpio: lpc32xx: allow building on non-lpc32xx targets
  serial: lpc32xx_hs: allow compile-testing
  watchdog: pnx4008_wdt: allow compile-testing
  usb: udc: lpc32xx: allow compile-testing
  usb: ohci-nxp: enable compile-testing

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

13 files changed, 84 insertions, 146 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8c4382e5e5f3..1086a0e8083e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -424,21 +424,6 @@ config ARCH_DOVE
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
-config ARCH_LPC32XX
-	bool "NXP LPC32XX"
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CLKSRC_LPC32XX
-	select COMMON_CLK
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for the NXP LPC32XX family of processors
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
@@ -686,6 +671,8 @@ source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
 
+source "arch/arm/mach-lpc32xx/Kconfig"
+
 source "arch/arm/mach-mediatek/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 0cdc6c7974b3..09deb57db942 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -12,6 +12,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_LPC32XX=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -93,6 +94,7 @@ CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_PNX=y
+CONFIG_GPIO_LPC32XX=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 000000000000..ec87c65f4536
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config ARCH_LPC32XX
+	bool "NXP LPC32XX"
+	depends on ARCH_MULTI_V5
+	select ARM_AMBA
+	select CLKSRC_LPC32XX
+	select CPU_ARM926T
+	select GPIOLIB
+	help
+	  Support for the NXP LPC32XX family of processors
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 5b71b4fab2cd..304ea61a0716 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -8,12 +8,12 @@
  */
 
 #include <linux/init.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 #include <asm/mach/map.h>
 #include <asm/system_info.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 /*
@@ -32,7 +32,7 @@ void lpc32xx_get_uid(u32 devid[4])
  */
 #define LPC32XX_IRAM_BANK_SIZE SZ_128K
 static u32 iram_size;
-u32 lpc32xx_return_iram_size(void)
+u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
 {
 	if (iram_size == 0) {
 		u32 savedval1, savedval2;
@@ -53,10 +53,26 @@ u32 lpc32xx_return_iram_size(void)
 		} else
 			iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
 	}
+	if (dmaaddr)
+		*dmaaddr = LPC32XX_IRAM_BASE;
+	if (mapbase)
+		*mapbase = io_p2v(LPC32XX_IRAM_BASE);
 
 	return iram_size;
 }
-EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size);
+EXPORT_SYMBOL_GPL(lpc32xx_return_iram);
+
+void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
+{
+	u32 tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+	if (mode == PHY_INTERFACE_MODE_MII)
+		tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
+	else
+		tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_set_phy_interface_mode);
 
 static struct map_desc lpc32xx_io_desc[] __initdata = {
 	{
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 8e597ce48a73..32f0ad217807 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -23,7 +23,6 @@ extern void __init lpc32xx_serial_init(void);
  */
 extern void lpc32xx_get_uid(u32 devid[4]);
 
-extern u32 lpc32xx_return_iram_size(void);
 /*
  * Pointers used for sizing and copying suspend function data
  */
diff --git a/arch/arm/mach-lpc32xx/include/mach/board.h b/arch/arm/mach-lpc32xx/include/mach/board.h
deleted file mode 100644
index 476513d970a4..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/board.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arm/arch/mach-lpc32xx/include/mach/board.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-extern u32 lpc32xx_return_iram_size(void);
-
-#endif  /* __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
deleted file mode 100644
index eec0f5f7e722..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- */
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#define LPC32XX_INTC_MASKED_STATUS_OFS	0x8
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IO_ADDRESS(LPC32XX_MIC_BASE)
-	.endm
-
-/*
- * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
- * as set if an interrupt is pending.
- */
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
-	clz	\irqnr, \irqstat
-	rsb	\irqnr, \irqnr, #31
-	teq	\irqstat, #0
-	.endm
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
deleted file mode 100644
index 4866f096ffce..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/hardware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Start of virtual addresses for IO devices
- */
-#define IO_BASE		0xF0000000
-
-/*
- * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
- */
-#define IO_ADDRESS(x)	IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
-			 IO_BASE)
-
-#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
-#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
deleted file mode 100644
index a568812a0b91..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/uncompress.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- */
-
-#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
-#define __ASM_ARM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-/*
- * Uncompress output is hardcoded to standard UART 5
- */
-
-#define UART_FIFO_CTL_TX_RESET	(1 << 2)
-#define UART_STATUS_TX_MT	(1 << 6)
-
-#define _UARTREG(x)		(void __iomem *)(LPC32XX_UART5_BASE + (x))
-
-#define LPC32XX_UART_DLLFIFO_O	0x00
-#define LPC32XX_UART_IIRFCR_O	0x08
-#define LPC32XX_UART_LSR_O	0x14
-
-static inline void putc(int ch)
-{
-	/* Wait for transmit FIFO to empty */
-	while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) &
-		UART_STATUS_TX_MT) == 0)
-		;
-
-	__raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O));
-}
-
-static inline void flush(void)
-{
-	__raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) |
-		UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O));
-}
-
-/* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/lpc32xx.h
index 1c53790444fc..5eeb884a1993 100644
--- a/arch/arm/mach-lpc32xx/include/mach/platform.h
+++ b/arch/arm/mach-lpc32xx/lpc32xx.h
@@ -7,8 +7,8 @@
  * Copyright (C) 2010 NXP Semiconductors
  */
 
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
+#ifndef __ARM_LPC32XX_H
+#define __ARM_LPC32XX_H
 
 #define _SBF(f, v)				((v) << (f))
 #define _BIT(n)					_SBF(n, 1)
@@ -700,4 +700,18 @@
 #define LPC32XX_USB_OTG_DEV_CLOCK_ON	_BIT(1)
 #define LPC32XX_USB_OTG_HOST_CLOCK_ON	_BIT(0)
 
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE		0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x)	IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+			 IO_BASE)
+
+#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
 #endif
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index 32bca351a73b..b27fa1b9f56c 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -70,8 +70,7 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 #define TEMP_IRAM_AREA  IO_ADDRESS(LPC32XX_IRAM_BASE)
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 3f9b30df9f0e..3e765c4bf986 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -16,8 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 #define LPC32XX_SUART_FIFO_SIZE	64
@@ -60,6 +59,36 @@ static struct uartinit uartinit_data[] __initdata = {
 	},
 };
 
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+	int bit;
+	u32 tmp;
+
+	switch (mapbase) {
+	case LPC32XX_HS_UART1_BASE:
+		bit = 0;
+		break;
+	case LPC32XX_HS_UART2_BASE:
+		bit = 1;
+		break;
+	case LPC32XX_HS_UART7_BASE:
+		bit = 6;
+		break;
+	default:
+		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+		return;
+	}
+
+	tmp = readl(LPC32XX_UARTCTL_CLOOP);
+	if (state)
+		tmp |= (1 << bit);
+	else
+		tmp &= ~(1 << bit);
+	writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_loopback_set);
+
 void __init lpc32xx_serial_init(void)
 {
 	u32 tmp, clkmodes = 0;
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
index 374f9f07fe48..3f0a8282ef6f 100644
--- a/arch/arm/mach-lpc32xx/suspend.S
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -11,8 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/platform.h>
-#include <mach/hardware.h>
+#include "lpc32xx.h"
 
 /* Using named register defines makes the code easier to follow */
 #define WORK1_REG			r0