Merge branch 'linus' into sched/core

Merge reason: pick up the latest scheduler fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

68 files changed, 307 insertions, 167 deletions

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index e5681636626f..841df7d21c2f 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		if (buf == 0) {
 			dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
 			       __func__, ptr);
-			return 0;
+			return ~0;
 		}
 
 		dev_dbg(dev,
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index d53c0abc4dd3..2b5b1421596c 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event)
 static void armpmu_enable(struct pmu *pmu)
 {
 	/* Enable all of the perf events on hardware. */
-	int idx;
+	int idx, enabled = 0;
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
 	if (!armpmu)
@@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu)
 			continue;
 
 		armpmu->enable(&event->hw, idx);
+		enabled = 1;
 	}
 
-	armpmu->start();
+	if (enabled)
+		armpmu->start();
 }
 
 static void armpmu_disable(struct pmu *pmu)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index ed11fb08b05a..acbb447ac6b5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup);
 #endif
 
 extern void paging_init(struct machine_desc *desc);
+extern void sanity_check_meminfo(void);
 extern void reboot_setup(char *str);
 
 unsigned int processor_id;
@@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
 	paging_init(mdesc);
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 60636f499cb3..2c277d40cee6 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void)
 		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
-			(twd_timer_rate / 1000000) % 100);
+			(twd_timer_rate / 10000) % 100);
 	}
 }
 
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 17fae4a42ab5..f1013d08bb57 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index cd850ed6f335..dba0d8d8a4bd 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91cap9_set_console_clock(portnr);
+		at91cap9_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index b228ce9e21a1..83a1a3fee554 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index a0ba475be04c..7227755ffec6 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91rm9200_set_console_clock(portnr);
+		at91rm9200_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 1fdeb9058a76..39f81f47b4ba 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9260_set_console_clock(portnr);
+		at91sam9260_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3eb4538fceeb..5004bf0a05f2 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9261_set_console_clock(portnr);
+		at91sam9261_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ffe081b77ed0..a050f41fc860 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9263_set_console_clock(portnr);
+		at91sam9263_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 2bb6ff9af1c7..11e214121b23 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = {
 static struct clk_lookup periph_clocks_lookups[] = {
 	/* One additional fake clock for ohci */
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 05674865bc21..600bffb01edb 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9g45_set_console_clock(portnr);
+		at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 1a40f16b66c8..29dff18ed130 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index c296045f2b6a..aacb19dc9225 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9rl_set_console_clock(portnr);
+		at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 1904fdf87613..cdb65d483250 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
-	cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
+	cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (cap9adk_nand_data.bus_width_16)
 		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index d600dc123227..5c240743c5b7 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index f897f84d43dc..b60c22b6e241 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 605b26f40a4c..9bbdc92ea194 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 7624cf0d006b..1325a50101a8 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 063c95d0e8f0..33eaa135f248 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
index b855ee75f72c..8f4866045b41 100644
--- a/arch/arm/mach-at91/include/mach/system_rev.h
+++ b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -13,13 +13,13 @@
  * the 16-31 bit are reserved for at91 generic information
  *
  * bit 31:
- *	0 => nand 16 bit
- *	1 => nand 8 bit
+ *	0 => nand 8 bit
+ *	1 => nand 16 bit
  */
-#define BOARD_HAVE_NAND_8BIT	(1 << 31)
-static int inline board_have_nand_8bit(void)
+#define BOARD_HAVE_NAND_16BIT	(1 << 31)
+static inline int board_have_nand_16bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_8BIT;
+	return system_rev & BOARD_HAVE_NAND_16BIT;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index c67f684ee3e5..09a87e61ffcf 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -520,7 +520,7 @@ fail:
 	 */
 	if (have_imager()) {
 		label = "HD imager";
-		mux |= 1;
+		mux |= 2;
 
 		/* externally mux MMC1/ENET/AIC33 to imager */
 		mux |= BIT(6) | BIT(5) | BIT(3);
@@ -540,7 +540,7 @@ fail:
 		resets &= ~BIT(1);
 
 		if (have_tvp7002()) {
-			mux |= 2;
+			mux |= 1;
 			resets &= ~BIT(2);
 			label = "tvp7002 HD";
 		} else {
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index e7221398e5af..cafbe13a82a5 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -254,8 +254,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
 	struct davinci_gpio_regs __iomem *g;
 	u32 mask = 0xffff;
+	struct davinci_gpio_controller *d;
 
-	g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+	d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+	g = (struct davinci_gpio_regs __iomem *)d->regs;
 
 	/* we only care about one bank */
 	if (irq & 1)
@@ -274,11 +276,14 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		if (!status)
 			break;
 		__raw_writel(status, &g->intstat);
-		if (irq & 1)
-			status >>= 16;
 
 		/* now demux them to the right lowlevel handler */
-		n = (int)irq_get_handler_data(irq);
+		n = d->irq_base;
+		if (irq & 1) {
+			n += 16;
+			status >>= 16;
+		}
+
 		while (status) {
 			res = ffs(status);
 			n += res;
@@ -424,7 +429,13 @@ static int __init davinci_gpio_irq_setup(void)
 
 		/* set up all irqs in this bank */
 		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-		irq_set_handler_data(bank_irq, (__force void *)g);
+
+		/*
+		 * Each chip handles 32 gpios, and each irq bank consists of 16
+		 * gpio irqs. Pass the irq bank's corresponding controller to
+		 * the chained irq handler.
+		 */
+		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
 
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			irq_set_chip(irq, &gpio_irqchip);
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index bfe68ec4e1a6..952dc126c390 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -52,8 +52,14 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq);
+	if (!gc) {
+		pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
+		       __func__, irq_start);
+		return;
+	}
+
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1d4b65fd673e..6659a0d137a3 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev,
 	unsigned int mcr;
 
 	mcr = 0;
-	if (!(mctrl & TIOCM_RTS))
+	if (mctrl & TIOCM_RTS)
 		mcr |= 2;
-	if (!(mctrl & TIOCM_DTR))
+	if (mctrl & TIOCM_DTR)
 		mcr |= 1;
 
 	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 9babe4473e88..bfd621460abf 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -23,6 +23,7 @@
 #include <plat/sdhci.h>
 #include <plat/devs.h>
 #include <plat/fimc-core.h>
+#include <plat/iic-core.h>
 
 #include <mach/regs-irq.h>
 
@@ -132,6 +133,11 @@ void __init exynos4_map_io(void)
 	s3c_fimc_setname(1, "exynos4-fimc");
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
+
+	/* The I2C bus controllers are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
 }
 
 void __init exynos4_init_clocks(int xtal)
diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c
index 1eed5f9f7bd3..983069a53239 100644
--- a/arch/arm/mach-exynos4/dev-audio.c
+++ b/arch/arm/mach-exynos4/dev-audio.c
@@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = {
 
 static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3));
+	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
 
 	return 0;
 }
diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos4/headsmp.S
index 6c6cfc50c46b..3cdeb3647542 100644
--- a/arch/arm/mach-exynos4/headsmp.S
+++ b/arch/arm/mach-exynos4/headsmp.S
@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
+	__CPUINIT
 
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides
diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos4/init.c
index cf91f50e43ab..a8a83e3881a4 100644
--- a/arch/arm/mach-exynos4/init.c
+++ b/arch/arm/mach-exynos4/init.c
@@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 			tcfg->clocks = exynos4_serial_clocks;
 			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
 		}
+		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
 	}
 
 	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index 152676471b67..edd814110da8 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
 	.max_width		= 8,
@@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
 	.max_width		= 8,
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 74ed81a3cb1a..07772575d7ab 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -419,14 +419,20 @@ static void notrace ixp4xx_update_sched_clock(void)
 /*
  * clocksource
  */
+
+static cycle_t ixp4xx_clocksource_read(struct clocksource *c)
+{
+	return *IXP4XX_OSTS;
+}
+
 unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
 static void __init ixp4xx_clocksource_init(void)
 {
 	init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
 
-	clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32,
-			clocksource_mmio_readl_up);
+	clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
+			ixp4xx_clocksource_read);
 }
 
 /*
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 72b4e7631583..ab9f999106c7 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -79,7 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
-static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 
 /* device and clock bindings */
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 8f92ccd26edf..1464607aa60d 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -110,7 +110,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
-static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(u2o, USB, 0x1b, 480000000);
 
 /* device and clock bindings */
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index de88c9297b68..f49ce85d2448 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
 	.delay		= 9,
 };
 
-static struct platform_device ams_delta_kp_device __initdata = {
+static struct platform_device ams_delta_kp_device = {
 	.name		= "omap-keypad",
 	.id		= -1,
 	.dev		= {
@@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = {
 	.resource	= ams_delta_kp_resources,
 };
 
-static struct platform_device ams_delta_lcd_device __initdata = {
+static struct platform_device ams_delta_lcd_device = {
 	.name	= "lcd_ams_delta",
 	.id	= -1,
 };
 
-static struct platform_device ams_delta_led_device __initdata = {
+static struct platform_device ams_delta_led_device = {
 	.name	= "ams-delta-led",
 	.id	= -1
 };
@@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = {
 	.power		= ams_delta_camera_power,
 };
 
-static struct platform_device ams_delta_camera_device __initdata = {
+static struct platform_device ams_delta_camera_device = {
 	.name   = "soc-camera-pdrv",
 	.id     = 0,
 	.dev    = {
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 04c4b04cf54e..364137c2042c 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap15xx_mpu_gpio = {
+static struct platform_device omap15xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap15xx_gpio = {
+static struct platform_device omap15xx_gpio = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 5dd0d4c82b24..293a246e2824 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap16xx_mpu_gpio = {
+static struct platform_device omap16xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio1 = {
+static struct platform_device omap16xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio2 = {
+static struct platform_device omap16xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio3 = {
+static struct platform_device omap16xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio4 = {
+static struct platform_device omap16xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 1204c8b871af..c6ad248d63a6 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.bank_stride		= 2,
 };
 
-static struct __initdata platform_device omap7xx_mpu_gpio = {
+static struct platform_device omap7xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio1 = {
+static struct platform_device omap7xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio2 = {
+static struct platform_device omap7xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio3 = {
+static struct platform_device omap7xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio4 = {
+static struct platform_device omap7xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {
@@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio5 = {
+static struct platform_device omap7xx_gpio5 = {
 	.name           = "omap_gpio",
 	.id             = 5,
 	.dev            = {
@@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio6 = {
+static struct platform_device omap7xx_gpio6 = {
 	.name           = "omap_gpio",
 	.id             = 6,
 	.dev            = {
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 990366726c58..88bd6f7705f0 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -558,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module =
 	.subdev_board_info = &rx51_si4713_board_info,
 };
 
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
+static struct platform_device rx51_si4713_dev = {
 	.name	= "radio-si4713",
 	.id	= -1,
 	.dev	= {
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 87ae3129f4f7..b27544bcafcb 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void)
 		if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
 		    (GPDR(i) & GPIO_bit(i))) {
 			if (GPLR(i) & GPIO_bit(i))
-				PGSR(i) |= GPIO_bit(i);
+				PGSR(gpio_to_bank(i)) |= GPIO_bit(i);
 			else
-				PGSR(i) &= ~GPIO_bit(i);
+				PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i);
 		}
 	}
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d130f77b6d11..2f37d43f51b6 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
 	.xres		= 480,
 	.yres		= 272,
 	.bpp		= 16,
-	.hsync_len	= 4,
+	.hsync_len	= 41,
 	.left_margin	= 2,
 	.right_margin	= 1,
-	.vsync_len	= 1,
+	.vsync_len	= 10,
 	.upper_margin	= 3,
 	.lower_margin	= 1,
 	.sync		= 0,
@@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void)
 {
 	int ret;
 
-	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-
-	/* Earlier devices had the backlight regulator controlled
-	 * via PWM, later versions use another controller for that */
-	if ((system_rev & 0xff) < 2) {
-		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
-		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
-		platform_device_register(&raumfeld_pwm_backlight_device);
-	} else
-		platform_device_register(&raumfeld_lt3593_device);
-
 	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
 	else
 		gpio_direction_output(GPIO_TFT_VA_EN, 1);
 
+	msleep(100);
+
 	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
 	else
 		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
 
+	/* Hardware revision 2 has the backlight regulator controlled
+	 * by an LT3593, earlier and later devices use PWM for that. */
+	if ((system_rev & 0xff) == 2) {
+		platform_device_register(&raumfeld_lt3593_device);
+	} else {
+		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		platform_device_register(&raumfeld_pwm_backlight_device);
+	}
+
+	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
 	platform_device_register(&pxa3xx_device_gcu);
 }
 
@@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = {
 
 #define SPI_AK4104	\
 {			\
-	.modalias	= "ak4104",	\
-	.max_speed_hz	= 10000,	\
-	.bus_num	= 0,		\
-	.chip_select	= 0,		\
+	.modalias	= "ak4104-codec",	\
+	.max_speed_hz	= 10000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 0,			\
 	.controller_data = (void *) GPIO_SPDIF_CS,	\
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index dd3120df09fe..fc2dc0b3d4fe 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -552,7 +552,7 @@ struct mini2440_features_t {
 	struct platform_device *optional[8];
 };
 
-static void mini2440_parse_features(
+static void __init mini2440_parse_features(
 		struct mini2440_features_t * features,
 		const char * features_str )
 {
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 82db072cb836..5e6b42089eb4 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 struct platform_device s3c64xx_device_spi1 = {
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index b197171e7d03..204bfafe4bfc 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -113,7 +113,7 @@ found:
 	return chan;
 }
 
-int s3c2410_dma_config(unsigned int channel, int xferunit)
+int s3c2410_dma_config(enum dma_ch channel, int xferunit)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -297,7 +297,7 @@ static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
 	return 0;
 }
 
-int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -331,7 +331,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
  *
  */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -415,7 +415,7 @@ err_buff:
 EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 
-int s3c2410_dma_devconfig(unsigned int channel,
+int s3c2410_dma_devconfig(enum dma_ch channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
@@ -463,7 +463,7 @@ int s3c2410_dma_devconfig(unsigned int channel,
 EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 
-int s3c2410_dma_getposition(unsigned int channel,
+int s3c2410_dma_getposition(enum dma_ch channel,
 			    dma_addr_t *src, dma_addr_t *dst)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -487,7 +487,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel,
+int s3c2410_dma_request(enum dma_ch channel,
 			struct s3c2410_dma_client *client,
 			void *dev)
 {
@@ -533,7 +533,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
  * allowed to go through.
 */
 
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index e78ee18c76e3..ac825e826326 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
 	.cfg_gpio	= s5p6440_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x1ff,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
 	.cfg_gpio	= s5p6450_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x1ff,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
 	.cfg_gpio	= s5p6440_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x7f,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
 	.cfg_gpio	= s5p6450_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x7f,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 struct platform_device s5p64x0_device_spi1 = {
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
index 57b19794d9bb..e5d6c4dceb56 100644
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ b/arch/arm/mach-s5pc100/dev-spi.c
@@ -15,6 +15,7 @@
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
@@ -90,6 +91,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -134,6 +136,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 struct platform_device s5pc100_device_spi1 = {
@@ -176,6 +179,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 struct platform_device s5pc100_device_spi2 = {
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
index e3249a47e3b1..eaf9a7bff7a0 100644
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ b/arch/arm/mach-s5pv210/dev-spi.c
@@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
 	.fifo_lvl_mask = 0x1ff,
 	.rx_lvl_offset = 15,
 	.high_speed = 1,
+	.tx_st_done = 25,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 15,
 	.high_speed = 1,
+	.tx_st_done = 25,
 };
 
 struct platform_device s5pv210_device_spi1 = {
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 1e2aba23e0d6..ce5c2513c6ce 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -381,7 +381,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 	gpio_set_value(GPIO_PORT114, state);
 }
 
-static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
+static struct sh_mobile_sdhi_info sh_sdhi1_info = {
 	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
 	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
 	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -413,7 +413,7 @@ static struct platform_device sdhi1_device = {
 	.name		= "sh_mobile_sdhi",
 	.id		= 1,
 	.dev		= {
-		.platform_data	= &sh_sdhi1_platdata,
+		.platform_data	= &sh_sdhi1_info,
 	},
 	.num_resources	= ARRAY_SIZE(sdhi1_resources),
 	.resource	= sdhi1_resources,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index f6b687f61c28..803bc6edfca4 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -913,7 +913,7 @@ static struct i2c_board_info imx074_info = {
 	I2C_BOARD_INFO("imx074", 0x1a),
 };
 
-struct soc_camera_link imx074_link = {
+static struct soc_camera_link imx074_link = {
 	.bus_id		= 0,
 	.board_info	= &imx074_info,
 	.i2c_adapter_id	= 0,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 7e1d37584321..3802f2afabef 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1287,9 +1287,9 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usbhs0_device,
 	&usb1_host_device,
 	&usbhs1_device,
+	&usbhs0_device,
 	&leds_device,
 	&fsi_device,
 	&fsi_ak4643_device,
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index fd4cf1ca5efd..70cdbd60596a 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -110,10 +110,18 @@ static pin_cfg_t mop500_pins_common[] = {
 	GPIO168_KP_O0,
 
 	/* UART */
-	GPIO0_U0_CTSn	| PIN_INPUT_PULLUP,
-	GPIO1_U0_RTSn	| PIN_OUTPUT_HIGH,
-	GPIO2_U0_RXD	| PIN_INPUT_PULLUP,
-	GPIO3_U0_TXD	| PIN_OUTPUT_HIGH,
+	/* uart-0 pins gpio configuration should be
+	 * kept intact to prevent glitch in tx line
+	 * when tty dev is opened. Later these pins
+	 * are configured to uart mop500_pins_uart0
+	 *
+	 * It will be replaced with uart configuration
+	 * once the issue is solved.
+	 */
+	GPIO0_GPIO	| PIN_INPUT_PULLUP,
+	GPIO1_GPIO	| PIN_OUTPUT_HIGH,
+	GPIO2_GPIO	| PIN_INPUT_PULLUP,
+	GPIO3_GPIO	| PIN_OUTPUT_HIGH,
 
 	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
 	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb26f40493e6..2a08c07dec6d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -27,18 +27,21 @@
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
+#include <plat/pincfg.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
 
+#include "pins-db8500.h"
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
@@ -393,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
+
+static pin_cfg_t mop500_pins_uart0[] = {
+	GPIO0_U0_CTSn   | PIN_INPUT_PULLUP,
+	GPIO1_U0_RTSn   | PIN_OUTPUT_HIGH,
+	GPIO2_U0_RXD    | PIN_INPUT_PULLUP,
+	GPIO3_U0_TXD    | PIN_OUTPUT_HIGH,
+};
+
+#define PRCC_K_SOFTRST_SET      0x18
+#define PRCC_K_SOFTRST_CLEAR    0x1C
+static void ux500_uart0_reset(void)
+{
+	void __iomem *prcc_rst_set, *prcc_rst_clr;
+
+	prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+			PRCC_K_SOFTRST_SET);
+	prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+			PRCC_K_SOFTRST_CLEAR);
+
+	/* Activate soft reset PRCC_K_SOFTRST_CLEAR */
+	writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
+	udelay(1);
+
+	/* Release soft reset PRCC_K_SOFTRST_SET */
+	writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
+	udelay(1);
+}
+
+static void ux500_uart0_init(void)
+{
+	int ret;
+
+	ret = nmk_config_pins(mop500_pins_uart0,
+			ARRAY_SIZE(mop500_pins_uart0));
+	if (ret < 0)
+		pr_err("pl011: uart pins_enable failed\n");
+}
+
+static void ux500_uart0_exit(void)
+{
+	int ret;
+
+	ret = nmk_config_pins_sleep(mop500_pins_uart0,
+			ARRAY_SIZE(mop500_pins_uart0));
+	if (ret < 0)
+		pr_err("pl011: uart pins_disable failed\n");
+}
+
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
+	.init = ux500_uart0_init,
+	.exit = ux500_uart0_exit,
+	.reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
index 245140c0df10..642de0408f25 100644
--- a/arch/arm/mach-vt8500/irq.c
+++ b/arch/arm/mach-vt8500/irq.c
@@ -39,9 +39,10 @@
 static void __iomem *ic_regbase;
 static void __iomem *sic_regbase;
 
-static void vt8500_irq_mask(unsigned int irq)
+static void vt8500_irq_mask(struct irq_data *d)
 {
 	void __iomem *base = ic_regbase;
+	unsigned irq = d->irq;
 	u8 edge;
 
 	if (irq >= 64) {
@@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq)
 	}
 }
 
-static void vt8500_irq_unmask(unsigned int irq)
+static void vt8500_irq_unmask(struct irq_data *d)
 {
 	void __iomem *base = ic_regbase;
+	unsigned irq = d->irq;
 	u8 dctr;
 
 	if (irq >= 64) {
@@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq)
 	writeb(dctr, base + VT8500_IC_DCTR + irq);
 }
 
-static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
 	void __iomem *base = ic_regbase;
-	unsigned int orig_irq = irq;
+	unsigned irq = d->irq;
+	unsigned orig_irq = irq;
 	u8 dctr;
 
 	if (irq >= 64) {
@@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
 }
 
 static struct irq_chip vt8500_irq_chip = {
-	.name      = "vt8500",
-	.ack       = vt8500_irq_mask,
-	.mask      = vt8500_irq_mask,
-	.unmask    = vt8500_irq_unmask,
-	.set_type  = vt8500_irq_set_type,
+	.name = "vt8500",
+	.irq_ack = vt8500_irq_mask,
+	.irq_mask = vt8500_irq_mask,
+	.irq_unmask = vt8500_irq_unmask,
+	.irq_set_type = vt8500_irq_set_type,
 };
 
 void __init vt8500_init_irq(void)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index ef59099a5463..44c086710d2b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -120,17 +120,22 @@ static void l2x0_cache_sync(void)
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
-static void l2x0_flush_all(void)
+static void __l2x0_flush_all(void)
 {
-	unsigned long flags;
-
-	/* clean all ways */
-	spin_lock_irqsave(&l2x0_lock, flags);
 	debug_writel(0x03);
 	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
 	cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	debug_writel(0x00);
+}
+
+static void l2x0_flush_all(void)
+{
+	unsigned long flags;
+
+	/* clean all ways */
+	spin_lock_irqsave(&l2x0_lock, flags);
+	__l2x0_flush_all();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
@@ -266,7 +271,9 @@ static void l2x0_disable(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(0, l2x0_base + L2X0_CTRL);
+	__l2x0_flush_all();
+	writel_relaxed(0, l2x0_base + L2X0_CTRL);
+	dsb();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9d9e736c2b4f..594d677b92c8 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc);
 
 static phys_addr_t lowmem_limit __initdata = 0;
 
-static void __init sanity_check_meminfo(void)
+void __init sanity_check_meminfo(void)
 {
 	int i, j, highmem = 0;
 
@@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
+	memblock_set_current_limit(lowmem_limit);
+
 	build_mem_type_table();
-	sanity_check_meminfo();
 	prepare_page_table();
 	map_lowmem();
 	devicemaps_init(mdesc);
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 687d02319a41..941a98c9e8aa 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void)
 	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
 }
 
+void __init sanity_check_meminfo(void)
+{
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 5b4fffab1eb4..41ab97ebe4cf 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -432,7 +432,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 	ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF;
 	ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
 	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_clr_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 	ct->chip.irq_set_type = gpio_irq_set_type;
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index 48ebb9479b61..a11dc3670505 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -50,7 +50,7 @@ static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
 	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
 }
 
-static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
 {
 	return &pxa_gpio_chips[gpio_to_bank(gpio)];
 }
@@ -161,7 +161,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
 	int gpio = irq_to_gpio(d->irq);
 	unsigned long gpdr, mask = GPIO_bit(gpio);
 
-	c = gpio_to_chip(gpio);
+	c = gpio_to_pxachip(gpio);
 
 	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
@@ -230,7 +230,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
 static void pxa_ack_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 
 	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
 }
@@ -238,7 +238,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d)
 static void pxa_mask_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 	uint32_t grer, gfer;
 
 	c->irq_mask &= ~GPIO_bit(gpio);
@@ -252,7 +252,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d)
 static void pxa_unmask_muxed_gpio(struct irq_data *d)
 {
 	int gpio = irq_to_gpio(d->irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 
 	c->irq_mask |= GPIO_bit(gpio);
 	update_edge_detect(c);
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 2abf9660bc6c..539bd0e3defd 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -712,7 +712,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel,
+int s3c2410_dma_request(enum dma_ch channel,
 			struct s3c2410_dma_client *client,
 			void *dev)
 {
@@ -783,7 +783,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
  * allowed to go through.
 */
 
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;
@@ -974,7 +974,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 }
 
 int
-s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -1021,23 +1021,19 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
  * xfersize:     size of unit in bytes (1,2,4)
 */
 
-int s3c2410_dma_config(unsigned int channel,
+int s3c2410_dma_config(enum dma_ch channel,
 		       int xferunit)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned int dcon;
 
-	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
-		 __func__, channel, xferunit, dcon);
+	pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit);
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
-
 	dcon = chan->dcon & dma_sel.dcon_mask;
-
-	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
+	pr_debug("%s: dcon is %08x\n", __func__, dcon);
 
 	switch (chan->req_ch) {
 	case DMACH_I2S_IN:
@@ -1104,7 +1100,7 @@ EXPORT_SYMBOL(s3c2410_dma_config);
  * devaddr:   physical address of the source
 */
 
-int s3c2410_dma_devconfig(unsigned int channel,
+int s3c2410_dma_devconfig(enum dma_ch channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
@@ -1177,7 +1173,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
  * returns the current transfer points for the dma source and destination
 */
 
-int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
+int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -1235,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 	/* restore channel's hardware configuration */
 
 	if (!cp->in_use)
-		return 0;
+		return;
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
@@ -1246,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 
 	if (cp->map != NULL)
 		dma_sel.select(cp, cp->map);
-
-	return 0;
 }
 
 static void s3c2410_dma_resume(void)
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index 135abda31c9a..327ab9f662e8 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -152,7 +152,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 	if (!gc)
 		return -ENOMEM;
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 	ct->chip.irq_set_type = s5p_gpioint_set_type,
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
index 899a8cc011ff..612934c48b0d 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-s5p/s5p-time.c
@@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void)
 
 	clock_rate = clk_get_rate(tin_source);
 
-	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
-
 	s5p_time_setup(timer_source.source_id, TCNT_MAX);
 	s5p_time_start(timer_source.source_id, PERIODIC);
 
+	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+
 	if (clocksource_register_hz(&time_clocksource, clock_rate))
 		panic("%s: can't register clocksource\n", time_clocksource.name);
 }
diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c
index cb459dd95459..6143aa147688 100644
--- a/arch/arm/plat-samsung/dma.c
+++ b/arch/arm/plat-samsung/dma.c
@@ -41,7 +41,7 @@ struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
  * irq?
 */
 
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -56,7 +56,7 @@ int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
 }
 EXPORT_SYMBOL(s3c2410_dma_set_opfn);
 
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -71,7 +71,7 @@ int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
 }
 EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 4af108ff4112..e3b31c26ac3e 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -12,6 +12,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __PLAT_DEVS_H
+#define __PLAT_DEVS_H __FILE__
+
 #include <linux/platform_device.h>
 
 struct s3c24xx_uart_resources {
@@ -159,3 +163,5 @@ extern struct platform_device s3c_device_ac97;
  */
 extern void *s3c_set_platdata(void *pd, size_t pdsize,
 			      struct platform_device *pdev);
+
+#endif /* __PLAT_DEVS_H */
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
index 2e8f8c6560d7..8c273b7a6f56 100644
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -42,6 +42,7 @@ struct s3c2410_dma_client {
 };
 
 struct s3c2410_dma_chan;
+enum dma_ch;
 
 /* s3c2410_dma_cbfn_t
  *
@@ -62,7 +63,7 @@ typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
  * request a dma channel exclusivley
 */
 
-extern int s3c2410_dma_request(unsigned int channel,
+extern int s3c2410_dma_request(enum dma_ch channel,
 			       struct s3c2410_dma_client *, void *dev);
 
 
@@ -71,14 +72,14 @@ extern int s3c2410_dma_request(unsigned int channel,
  * change the state of the dma channel
 */
 
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op);
 
 /* s3c2410_dma_setflags
  *
  * set the channel's flags to a given state
 */
 
-extern int s3c2410_dma_setflags(unsigned int channel,
+extern int s3c2410_dma_setflags(enum dma_ch channel,
 				unsigned int flags);
 
 /* s3c2410_dma_free
@@ -86,7 +87,7 @@ extern int s3c2410_dma_setflags(unsigned int channel,
  * free the dma channel (will also abort any outstanding operations)
 */
 
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *);
 
 /* s3c2410_dma_enqueue
  *
@@ -95,7 +96,7 @@ extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
  * drained before the buffer is given to the DMA system.
 */
 
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			       dma_addr_t data, int size);
 
 /* s3c2410_dma_config
@@ -103,14 +104,14 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
  * configure the dma channel
 */
 
-extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
 
 /* s3c2410_dma_devconfig
  *
  * configure the device we're talking to
 */
 
-extern int s3c2410_dma_devconfig(unsigned int channel,
+extern int s3c2410_dma_devconfig(enum dma_ch channel,
 		enum s3c2410_dmasrc source, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
@@ -118,10 +119,10 @@ extern int s3c2410_dma_devconfig(unsigned int channel,
  * get the position that the dma transfer is currently at
 */
 
-extern int s3c2410_dma_getposition(unsigned int channel,
+extern int s3c2410_dma_getposition(enum dma_ch channel,
 				   dma_addr_t *src, dma_addr_t *dest);
 
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
 
 
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index c151c5f94a87..116edfe120b9 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -224,6 +224,8 @@
 #define S5PV210_UFSTAT_RXMASK	(255<<0)
 #define S5PV210_UFSTAT_RXSHIFT	(0)
 
+#define NO_NEED_CHECK_CLKSRC	1
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index 0ffe34a21554..4c16fa3621bb 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo {
  * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
  * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
  * @high_speed: If the controller supports HIGH_SPEED_EN bit
+ * @tx_st_done: Depends on tx fifo_lvl field
  */
 struct s3c64xx_spi_info {
 	int src_clk_nr;
@@ -53,6 +54,7 @@ struct s3c64xx_spi_info {
 	int fifo_lvl_mask;
 	int rx_lvl_offset;
 	int high_speed;
+	int tx_st_done;
 };
 
 /**
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
index 32582c0958e3..657405c481d0 100644
--- a/arch/arm/plat-samsung/irq-uart.c
+++ b/arch/arm/plat-samsung/irq-uart.c
@@ -54,8 +54,15 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
 
 	gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base,
 				    handle_level_irq);
+
+	if (!gc) {
+		pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
+		       __func__, uirq->base_irq);
+		return;
+	}
+
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 	ct->regs.ack = S3C64XX_UINTP;
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
index a607546ddbd0..f714d060370d 100644
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -54,6 +54,13 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
 
 	s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
 					 S3C64XX_TINT_CSTAT, handle_level_irq);
+
+	if (!s3c_tgc) {
+		pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
+		       __func__, timer_irq);
+		return;
+	}
+
 	ct = s3c_tgc->chip_types;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;