Merge tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX device tree change for 5.12:

- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
  and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
  readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
  adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
  WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.

* tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
  ARM: dts: imx6: RDU2: adjust audio devices nomenclature
  ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin
  ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
  ARM: dts: imx6: RDU2: reduce i2c drive-strength
  ARM: dts: imx6: rdu2: enable WDOG1
  ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter
  ARM: dts: imx6: add wakeup support via magic packet
  firmware: imx: select SOC_BUS to fix firmware build
  arm64: dts: imx8mp: Correct the gpio ranges of gpio3
  ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
  ARM: dts: imx: e60k02: add second uart
  ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
  ARM: dts: imx6sl-tolino-shine2hd: add second uart
  ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
  ARM: imx: build suspend-imx6.S with arm instruction set
  ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
  ARM: dts: add Kverneland TGO board
  ARM: dts: add Kverneland UT1, UT1Q and UT1P
  ARM: dts: imx6ul-14x14-evk: Add camera support
  ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
  ...

Link: https://lore.kernel.org/r/20210204120150.26186-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 3 insertions, 3 deletions

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 60ff19fa53b4..6c8a61c2cc74 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -101,7 +101,7 @@
 	reboot {
 		compatible ="syscon-reboot";
 		regmap = <&rst>;
-		offset = <0xb0>;
+		offset = <0>;
 		mask = <0x02>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ee1790230490..2a79e89f821e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -253,7 +253,7 @@
 			#size-cells = <1>;
 			ranges;
 
-			spba: bus@30000000 {
+			spba: spba-bus@30000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index ecccfbb4f5ad..23f5a5e37167 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -266,7 +266,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>;
+				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 26 144 4>;
 			};
 
 			gpio4: gpio@30230000 {