Merge tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Qualcomm ARM64 Updates for v4.13

* Fix APQ8016 SBC WLAN LED
* Add MSM8996 CPU node
* Add MSM8992 SMEM and fixed regulator
* Fixup MSM8916 USB support

* tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: apq8016-sbc: Correct WLAN LED default-trigger
  arm64: dts: msm8996: Add CPU clock controller node
  arm64: dts: smem enablement for msm8992
  arm64: dts: msm8992 add fixed regulator
  arm64: dts: qcom: Collapse usb support into one node

Signed-off-by: Olof Johansson <olof@lixom.net>

4 files changed, 107 insertions, 50 deletions

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index a17f5b9a5de6..bd310ac1967a 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -178,7 +178,7 @@
 			led@5 {
 				label = "apq8016-sbc:yellow:wlan";
 				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "wlan";
+				linux,default-trigger = "phy0tx";
 				default-state = "off";
 			};
 
@@ -215,22 +215,16 @@
 		usb@78d9000 {
 			extcon = <&usb_id>, <&usb_id>;
 			status = "okay";
-		};
-
-		ehci@78d9000 {
-			status = "okay";
-		};
-
-		phy@78d9000 {
-			v1p8-supply = <&pm8916_l7>;
-			v3p3-supply = <&pm8916_l13>;
-			vddcx-supply = <&pm8916_s1>;
-			extcon = <&usb_id>, <&usb_id>;
-			dr_mode = "otg";
-			status = "okay";
-			switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_sw_sel_pm>;
+			adp-disable;
+			hnp-disable;
+			srp-disable;
+			ulpi {
+				phy {
+					v1p8-supply = <&pm8916_l7>;
+					v3p3-supply = <&pm8916_l13>;
+					extcon = <&usb_id>;
+				};
+			};
 		};
 
 		lpass@07708000 {
@@ -348,6 +342,14 @@
 		pinctrl-0 = <&usb_id_default>;
 	};
 
+	usb-switch {
+		compatible = "toshiba,tc7usb40mu";
+		switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+		extcon = <&usb_id>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_sw_sel_pm>;
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index ab3093995ded..c963ef2ec5f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -546,44 +546,40 @@
 			status = "disabled";
 		};
 
-		usb_dev: usb@78d9000 {
+		otg: usb@78d9000 {
 			compatible = "qcom,ci-hdrc";
-			reg = <0x78d9000 0x400>;
-			dr_mode = "peripheral";
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			usb-phy = <&usb_otg>;
-			status = "disabled";
-		};
-
-		usb_host: ehci@78d9000 {
-			compatible = "qcom,ehci-host";
-			reg = <0x78d9000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			usb-phy = <&usb_otg>;
-			status = "disabled";
-		};
-
-		usb_otg: phy@78d9000 {
-			compatible = "qcom,usb-otg-snps";
-			reg = <0x78d9000 0x400>;
+			reg = <0x78d9000 0x200>,
+			      <0x78d9200 0x200>;
 			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-
-			qcom,vdd-levels = <500000 1000000 1320000>;
-			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
-			dr_mode = "peripheral";
-			qcom,otg-control = <2>; // PMIC
-			qcom,manual-pullup;
-
 			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-				 <&gcc GCC_USB_HS_SYSTEM_CLK>,
-				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-			clock-names = "iface", "core", "sleep";
-
-			resets = <&gcc GCC_USB2A_PHY_BCR>,
-				 <&gcc GCC_USB_HS_BCR>;
-			reset-names = "phy", "link";
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
 			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8916",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44
+						0x1 0x6b 0x2 0x24 0x3 0x13>;
+				};
+			};
 		};
 
 		intc: interrupt-controller@b000000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 44b2d37d8c4b..171578747ed0 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -68,6 +68,30 @@
 		clock-frequency = <32768>;
 	};
 
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		status = "okay";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
+	sfpb_mutex: hwmutex {
+		compatible = "qcom,sfpb-mutex";
+		syscon = <&sfpb_mutex_regs 0x0 0x100>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		hwlocks = <&sfpb_mutex 3>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -82,6 +106,11 @@
 				<0xf9002000 0x1000>;
 		};
 
+		apcs: syscon@f900d000 {
+			compatible = "syscon";
+			reg = <0xf900d000 0x2000>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -172,12 +201,36 @@
 			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x2000>;
 		};
+
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		sfpb_mutex_regs: syscon@fd484000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "syscon";
+			reg = <0xfd484000 0x400>;
+		};
 	};
 
 	memory {
 		device_type = "memory";
 		reg = <0 0 0 0>; // bootloader will update
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_region: smem@6a00000 {
+			reg = <0x0 0x6a00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
 };
 
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 9bc9c857a000..8f085716e258 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -311,6 +311,12 @@
 			reg = <0x300000 0x90000>;
 		};
 
+		kryocc: clock-controller@6400000 {
+			compatible = "qcom,apcc-msm8996";
+			reg = <0x6400000 0x90000>;
+			#clock-cells = <1>;
+		};
+
 		blsp1_spi0: spi@07575000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x07575000 0x600>;