Merge tag 'amlogic-arm64-dt-for-v5.14-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM64 DT changes for v5.14 round 2:
-  various fixes for Odroid C4/HC4 regulators handling, USB and SPI NOR Flash for HC4

* tag 'amlogic-arm64-dt-for-v5.14-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
  arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4
  arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
  arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0
  arm64: dts: meson-sm1-odroid: add 5v regulator gpio
  arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
  arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator

Link: https://lore.kernel.org/r/c953e97a-f901-a749-1fb6-b1caa75b4748@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 54 insertions, 20 deletions

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 8c327c03d845..8c30ce63686e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -23,18 +23,6 @@
 		};
 	};
 
-	hub_5v: regulator-hub_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "HUB_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-
-		/* Connected to the Hub CHIPENABLE, LOW sets low power state */
-		gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	sound {
 		model = "ODROID-C4";
 	};
@@ -58,8 +46,3 @@
 &ir {
 	linux,rc-map-name = "rc-odroid";
 };
-
-&usb2_phy1 {
-	/* Enable the hub which is connected to this port */
-	phy-supply = <&hub_5v>;
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index bf15700c4b15..f3f953225bf5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -44,6 +44,32 @@
 		};
 	};
 
+	/* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
+	p12v_0: regulator-p12v_0 {
+		compatible = "regulator-fixed";
+		regulator-name = "P12V_0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
+	p12v_1: regulator-p12v_1 {
+		compatible = "regulator-fixed";
+		regulator-name = "P12V_1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
 	sound {
 		model = "ODROID-HC4";
 	};
@@ -90,7 +116,25 @@
 	status = "disabled";
 };
 
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
 &usb {
-	phys = <&usb2_phy0>, <&usb2_phy1>;
-	phy-names = "usb2-phy0", "usb2-phy1";
+	phys = <&usb2_phy1>;
+	phy-names = "usb2-phy1";
+};
+
+&usb2_phy0 {
+	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index d14716b3d0f1..fd0ad85c165b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -46,8 +46,13 @@
 		regulator-name = "TF_IO";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
 
-		gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>;
 		gpios-states = <0>;
 
 		states = <3300000 0>,
@@ -78,6 +83,8 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 		vin-supply = <&main_12v>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
 	};
 
 	vcc_1v8: regulator-vcc_1v8 {