ARM: OMAP: Timer32K: Re-organize duplicated 32k-timer code

On OMAP2/3, the gp-timer code can be used for a 32kHz timer simply by
setting the source to be the 32k clock instead of sys_clk.

This patch uses the mach-omap2/timer-gp.c code for 32kHz timer on
OMAP2, moving the logic into mach-omap2/timer-gp.c, and not using
plat-omap/timer32k.c which, for OMAP2, is redundant with the timer-gp
code.

Also, if CONFIG_OMAP_32K_TIMER is enabled, the gptimer-based
clocksource is not used.  Instead the default 32k sync counter is used
as the clocksource (see the clocksource in plat-omap/common.c.)  This
is important for sleep/suspend so there is a valid counter during
sleep.  Note that the suspend/sleep code needs fixing to check for
overflows of this counter.

In addition, the OMAP2/3 details are removed from timer32k.c leaving
that with only OMAP1 specifics.  A follow-up patch will move it from
plat-omap common code to mach-omap1.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 1 insertions, 43 deletions

diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c
index ea76f1979a3d..ce034dc59d41 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/plat-omap/timer32k.c
@@ -40,6 +40,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
+
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/clocksource.h>
@@ -93,8 +94,6 @@ struct sys_timer omap_timer;
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
 				(((nr_jiffies) * (clock_rate)) / HZ)
 
-#if defined(CONFIG_ARCH_OMAP1)
-
 static inline void omap_32k_timer_write(int val, int reg)
 {
 	omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
@@ -120,30 +119,6 @@ static inline void omap_32k_timer_stop(void)
 
 #define omap_32k_timer_ack_irq()
 
-#elif defined(CONFIG_ARCH_OMAP2)
-
-static struct omap_dm_timer *gptimer;
-
-static inline void omap_32k_timer_start(unsigned long load_val)
-{
-	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	omap_dm_timer_start(gptimer);
-}
-
-static inline void omap_32k_timer_stop(void)
-{
-	omap_dm_timer_stop(gptimer);
-}
-
-static inline void omap_32k_timer_ack_irq(void)
-{
-	u32 status = omap_dm_timer_read_status(gptimer);
-	omap_dm_timer_write_status(gptimer, status);
-}
-
-#endif
-
 static void omap_32k_timer_set_mode(enum clock_event_mode mode,
 				    struct clock_event_device *evt)
 {
@@ -222,23 +197,6 @@ static struct irqaction omap_32k_timer_irq = {
 
 static __init void omap_init_32k_timer(void)
 {
-	if (cpu_class_is_omap1())
-		setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
-
-#ifdef CONFIG_ARCH_OMAP2
-	/* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
-	if (cpu_is_omap24xx()) {
-		gptimer = omap_dm_timer_request_specific(1);
-		BUG_ON(gptimer == NULL);
-
-		omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
-		setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
-		omap_dm_timer_set_int_enable(gptimer,
-			OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
-			OMAP_TIMER_INT_MATCH);
-	}
-#endif
-
 	clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
 					   NSEC_PER_SEC,
 					   clockevent_32k_timer.shift);