[ARM] Orion: move EHCI/I2C/UART peripheral init into board code

This patch moves initialisation of EHCI/I2C/UART platform devices
from the common orion5x_init() into the board support code.

The rationale behind this is that only the board support code knows
whether certain peripherals have been brought out on the board, and
not initialising peripherals that haven't been brought out is
desirable for example:
- to reduce user confusion (e.g. seeing both 'eth0' and 'eth1'
  appear while there is only one ethernet port on the board); and
- to allow for future power savings (peripherals that have not
  been brought out can be clock gated off entirely).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Russell King <linux@arm.linux.org.uk>

1 files changed, 20 insertions, 20 deletions

diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index ec53f866ed11..cd200f766099 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -213,12 +213,6 @@ static struct platform_device dns323_button_device = {
  * General Setup
  */
 
-static struct platform_device *dns323_plat_devices[] __initdata = {
-	&dns323_nor_flash,
-	&dns323_gpio_leds,
-	&dns323_button_device,
-};
-
 /*
  * On the DNS-323 the following devices are attached via I2C:
  *
@@ -253,11 +247,6 @@ static void __init dns323_init(void)
 	/* Setup basic Orion functions. Need to be called early. */
 	orion5x_init();
 
-	/* setup flash mapping
-	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
-	 */
-	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
-
 	/* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe
 	 *
 	 * Open a special address decode windows for the PCIe WA.
@@ -294,21 +283,32 @@ static void __init dns323_init(void)
 	*/
 	orion5x_gpio_set_valid_pins(0x07f6);
 
-	/* register dns323 specific power-off method */
-	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-		pr_err("DNS323: failed to setup power-off GPIO\n");
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&dns323_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
 
-	pm_power_off = dns323_power_off;
+	/* setup flash mapping
+	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
+	 */
+	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+	platform_device_register(&dns323_nor_flash);
+
+	platform_device_register(&dns323_gpio_leds);
 
-	/* register flash and other platform devices */
-	platform_add_devices(dns323_plat_devices,
-			     ARRAY_SIZE(dns323_plat_devices));
+	platform_device_register(&dns323_button_device);
 
 	i2c_register_board_info(0, dns323_i2c_devices,
 				ARRAY_SIZE(dns323_i2c_devices));
 
-	orion5x_eth_init(&dns323_eth_data);
+	/* register dns323 specific power-off method */
+	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+		pr_err("DNS323: failed to setup power-off GPIO\n");
+	pm_power_off = dns323_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */