ARM/dmaengine: edma: Merge the two drivers under drivers/dma/

Move the code out from arch/arm/common and merge it inside of the dmaengine
driver.
This change is done with as minimal (if eny) functional change to the code
as possible to avoid introducing regression.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

3 files changed, 0 insertions, 1435 deletions

diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index c3a4e9ceba34..9353184d730d 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -17,6 +17,3 @@ config SHARP_PARAM
 
 config SHARP_SCOOP
 	bool
-
-config TI_PRIV_EDMA
-	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 6ee5959a813b..27f23b15b1ea 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -15,6 +15,5 @@ obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
-obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
 obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
 obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
deleted file mode 100644
index 5b747f1bc8b5..000000000000
--- a/arch/arm/common/edma.c
+++ /dev/null
@@ -1,1431 +0,0 @@
-/*
- * EDMA3 support for DaVinci
- *
- * Copyright (C) 2006-2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
-#include <linux/pm_runtime.h>
-
-#include <linux/platform_data/edma.h>
-
-/* Offsets matching "struct edmacc_param" */
-#define PARM_OPT		0x00
-#define PARM_SRC		0x04
-#define PARM_A_B_CNT		0x08
-#define PARM_DST		0x0c
-#define PARM_SRC_DST_BIDX	0x10
-#define PARM_LINK_BCNTRLD	0x14
-#define PARM_SRC_DST_CIDX	0x18
-#define PARM_CCNT		0x1c
-
-#define PARM_SIZE		0x20
-
-/* Offsets for EDMA CC global channel registers and their shadows */
-#define SH_ER		0x00	/* 64 bits */
-#define SH_ECR		0x08	/* 64 bits */
-#define SH_ESR		0x10	/* 64 bits */
-#define SH_CER		0x18	/* 64 bits */
-#define SH_EER		0x20	/* 64 bits */
-#define SH_EECR		0x28	/* 64 bits */
-#define SH_EESR		0x30	/* 64 bits */
-#define SH_SER		0x38	/* 64 bits */
-#define SH_SECR		0x40	/* 64 bits */
-#define SH_IER		0x50	/* 64 bits */
-#define SH_IECR		0x58	/* 64 bits */
-#define SH_IESR		0x60	/* 64 bits */
-#define SH_IPR		0x68	/* 64 bits */
-#define SH_ICR		0x70	/* 64 bits */
-#define SH_IEVAL	0x78
-#define SH_QER		0x80
-#define SH_QEER		0x84
-#define SH_QEECR	0x88
-#define SH_QEESR	0x8c
-#define SH_QSER		0x90
-#define SH_QSECR	0x94
-#define SH_SIZE		0x200
-
-/* Offsets for EDMA CC global registers */
-#define EDMA_REV	0x0000
-#define EDMA_CCCFG	0x0004
-#define EDMA_QCHMAP	0x0200	/* 8 registers */
-#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
-#define EDMA_QDMAQNUM	0x0260
-#define EDMA_QUETCMAP	0x0280
-#define EDMA_QUEPRI	0x0284
-#define EDMA_EMR	0x0300	/* 64 bits */
-#define EDMA_EMCR	0x0308	/* 64 bits */
-#define EDMA_QEMR	0x0310
-#define EDMA_QEMCR	0x0314
-#define EDMA_CCERR	0x0318
-#define EDMA_CCERRCLR	0x031c
-#define EDMA_EEVAL	0x0320
-#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
-#define EDMA_QRAE	0x0380	/* 4 registers */
-#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
-#define EDMA_QSTAT	0x0600	/* 2 registers */
-#define EDMA_QWMTHRA	0x0620
-#define EDMA_QWMTHRB	0x0624
-#define EDMA_CCSTAT	0x0640
-
-#define EDMA_M		0x1000	/* global channel registers */
-#define EDMA_ECR	0x1008
-#define EDMA_ECRH	0x100C
-#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
-#define EDMA_PARM	0x4000	/* 128 param entries */
-
-#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
-
-#define EDMA_DCHMAP	0x0100  /* 64 registers */
-
-/* CCCFG register */
-#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
-#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
-#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
-#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
-#define CHMAP_EXIST		BIT(24)
-
-#define EDMA_MAX_DMACH           64
-#define EDMA_MAX_PARAMENTRY     512
-
-/*****************************************************************************/
-struct edma {
-	struct device	*dev;
-	void __iomem *base;
-
-	/* how many dma resources of each type */
-	unsigned	num_channels;
-	unsigned	num_region;
-	unsigned	num_slots;
-	unsigned	num_tc;
-	enum dma_event_q 	default_queue;
-
-	/* list of channels with no even trigger; terminated by "-1" */
-	const s8	*noevent;
-
-	struct edma_soc_info *info;
-	int		id;
-	bool		unused_chan_list_done;
-	/* The edma_inuse bit for each PaRAM slot is clear unless the
-	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
-	 */
-	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
-
-	/* The edma_unused bit for each channel is clear unless
-	 * it is not being used on this platform. It uses a bit
-	 * of SOC-specific initialization code.
-	 */
-	DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
-
-	struct dma_interrupt_data {
-		void (*callback)(unsigned channel, unsigned short ch_status,
-				void *data);
-		void *data;
-	} intr_data[EDMA_MAX_DMACH];
-};
-/*****************************************************************************/
-
-static inline unsigned int edma_read(struct edma *cc, int offset)
-{
-	return (unsigned int)__raw_readl(cc->base + offset);
-}
-
-static inline void edma_write(struct edma *cc, int offset, int val)
-{
-	__raw_writel(val, cc->base + offset);
-}
-static inline void edma_modify(struct edma *cc, int offset, unsigned and,
-			       unsigned or)
-{
-	unsigned val = edma_read(cc, offset);
-	val &= and;
-	val |= or;
-	edma_write(cc, offset, val);
-}
-static inline void edma_and(struct edma *cc, int offset, unsigned and)
-{
-	unsigned val = edma_read(cc, offset);
-	val &= and;
-	edma_write(cc, offset, val);
-}
-static inline void edma_or(struct edma *cc, int offset, unsigned or)
-{
-	unsigned val = edma_read(cc, offset);
-	val |= or;
-	edma_write(cc, offset, val);
-}
-static inline unsigned int edma_read_array(struct edma *cc, int offset, int i)
-{
-	return edma_read(cc, offset + (i << 2));
-}
-static inline void edma_write_array(struct edma *cc, int offset, int i,
-		unsigned val)
-{
-	edma_write(cc, offset + (i << 2), val);
-}
-static inline void edma_modify_array(struct edma *cc, int offset, int i,
-		unsigned and, unsigned or)
-{
-	edma_modify(cc, offset + (i << 2), and, or);
-}
-static inline void edma_or_array(struct edma *cc, int offset, int i, unsigned or)
-{
-	edma_or(cc, offset + (i << 2), or);
-}
-static inline void edma_or_array2(struct edma *cc, int offset, int i, int j,
-		unsigned or)
-{
-	edma_or(cc, offset + ((i*2 + j) << 2), or);
-}
-static inline void edma_write_array2(struct edma *cc, int offset, int i, int j,
-		unsigned val)
-{
-	edma_write(cc, offset + ((i*2 + j) << 2), val);
-}
-static inline unsigned int edma_shadow0_read(struct edma *cc, int offset)
-{
-	return edma_read(cc, EDMA_SHADOW0 + offset);
-}
-static inline unsigned int edma_shadow0_read_array(struct edma *cc, int offset,
-		int i)
-{
-	return edma_read(cc, EDMA_SHADOW0 + offset + (i << 2));
-}
-static inline void edma_shadow0_write(struct edma *cc, int offset, unsigned val)
-{
-	edma_write(cc, EDMA_SHADOW0 + offset, val);
-}
-static inline void edma_shadow0_write_array(struct edma *cc, int offset, int i,
-		unsigned val)
-{
-	edma_write(cc, EDMA_SHADOW0 + offset + (i << 2), val);
-}
-static inline unsigned int edma_parm_read(struct edma *cc, int offset,
-		int param_no)
-{
-	return edma_read(cc, EDMA_PARM + offset + (param_no << 5));
-}
-static inline void edma_parm_write(struct edma *cc, int offset, int param_no,
-		unsigned val)
-{
-	edma_write(cc, EDMA_PARM + offset + (param_no << 5), val);
-}
-static inline void edma_parm_modify(struct edma *cc, int offset, int param_no,
-		unsigned and, unsigned or)
-{
-	edma_modify(cc, EDMA_PARM + offset + (param_no << 5), and, or);
-}
-static inline void edma_parm_and(struct edma *cc, int offset, int param_no,
-		unsigned and)
-{
-	edma_and(cc, EDMA_PARM + offset + (param_no << 5), and);
-}
-static inline void edma_parm_or(struct edma *cc, int offset, int param_no,
-		unsigned or)
-{
-	edma_or(cc, EDMA_PARM + offset + (param_no << 5), or);
-}
-
-static inline void set_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		set_bit(offset + (len - 1), p);
-}
-
-static inline void clear_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		clear_bit(offset + (len - 1), p);
-}
-
-/*****************************************************************************/
-static int arch_num_cc;
-
-/* dummy param set used to (re)initialize parameter RAM slots */
-static const struct edmacc_param dummy_paramset = {
-	.link_bcntrld = 0xffff,
-	.ccnt = 1,
-};
-
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
-/*****************************************************************************/
-
-static void map_dmach_queue(struct edma *cc, unsigned ch_no,
-			    enum dma_event_q queue_no)
-{
-	int bit = (ch_no & 0x7) * 4;
-
-	/* default to low priority queue */
-	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = cc->default_queue;
-
-	queue_no &= 7;
-	edma_modify_array(cc, EDMA_DMAQNUM, (ch_no >> 3),
-			  ~(0x7 << bit), queue_no << bit);
-}
-
-static void assign_priority_to_queue(struct edma *cc, int queue_no,
-				     int priority)
-{
-	int bit = queue_no * 4;
-	edma_modify(cc, EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
-}
-
-/**
- * map_dmach_param - Maps channel number to param entry number
- *
- * This maps the dma channel number to param entry numberter. In
- * other words using the DMA channel mapping registers a param entry
- * can be mapped to any channel
- *
- * Callers are responsible for ensuring the channel mapping logic is
- * included in that particular EDMA variant (Eg : dm646x)
- *
- */
-static void map_dmach_param(struct edma *cc)
-{
-	int i;
-	for (i = 0; i < EDMA_MAX_DMACH; i++)
-		edma_write_array(cc, EDMA_DCHMAP , i , (i << 5));
-}
-
-static inline void setup_dma_interrupt(struct edma *cc, unsigned lch,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data)
-{
-	lch = EDMA_CHAN_SLOT(lch);
-
-	if (!callback)
-		edma_shadow0_write_array(cc, SH_IECR, lch >> 5,
-					 BIT(lch & 0x1f));
-
-	cc->intr_data[lch].callback = callback;
-	cc->intr_data[lch].data = data;
-
-	if (callback) {
-		edma_shadow0_write_array(cc, SH_ICR, lch >> 5, BIT(lch & 0x1f));
-		edma_shadow0_write_array(cc, SH_IESR, lch >> 5,
-					 BIT(lch & 0x1f));
-	}
-}
-
-/******************************************************************************
- *
- * DMA interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_irq_handler(int irq, void *data)
-{
-	struct edma *cc = data;
-	int ctlr;
-	u32 sh_ier;
-	u32 sh_ipr;
-	u32 bank;
-
-	ctlr = cc->id;
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(cc->dev, "dma_irq_handler\n");
-
-	sh_ipr = edma_shadow0_read_array(cc, SH_IPR, 0);
-	if (!sh_ipr) {
-		sh_ipr = edma_shadow0_read_array(cc, SH_IPR, 1);
-		if (!sh_ipr)
-			return IRQ_NONE;
-		sh_ier = edma_shadow0_read_array(cc, SH_IER, 1);
-		bank = 1;
-	} else {
-		sh_ier = edma_shadow0_read_array(cc, SH_IER, 0);
-		bank = 0;
-	}
-
-	do {
-		u32 slot;
-		u32 channel;
-
-		dev_dbg(cc->dev, "IPR%d %08x\n", bank, sh_ipr);
-
-		slot = __ffs(sh_ipr);
-		sh_ipr &= ~(BIT(slot));
-
-		if (sh_ier & BIT(slot)) {
-			channel = (bank << 5) | slot;
-			/* Clear the corresponding IPR bits */
-			edma_shadow0_write_array(cc, SH_ICR, bank, BIT(slot));
-			if (cc->intr_data[channel].callback)
-				cc->intr_data[channel].callback(
-					EDMA_CTLR_CHAN(ctlr, channel),
-					EDMA_DMA_COMPLETE,
-					cc->intr_data[channel].data);
-		}
-	} while (sh_ipr);
-
-	edma_shadow0_write(cc, SH_IEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * DMA error interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_ccerr_handler(int irq, void *data)
-{
-	struct edma *cc = data;
-	int i;
-	int ctlr;
-	unsigned int cnt = 0;
-
-	ctlr = cc->id;
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(cc->dev, "dma_ccerr_handler\n");
-
-	if ((edma_read_array(cc, EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(cc, EDMA_EMR, 1) == 0) &&
-	    (edma_read(cc, EDMA_QEMR) == 0) &&
-	    (edma_read(cc, EDMA_CCERR) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j = -1;
-		if (edma_read_array(cc, EDMA_EMR, 0))
-			j = 0;
-		else if (edma_read_array(cc, EDMA_EMR, 1))
-			j = 1;
-		if (j >= 0) {
-			dev_dbg(cc->dev, "EMR%d %08x\n", j,
-				edma_read_array(cc, EDMA_EMR, j));
-			for (i = 0; i < 32; i++) {
-				int k = (j << 5) + i;
-				if (edma_read_array(cc, EDMA_EMR, j) &
-							BIT(i)) {
-					/* Clear the corresponding EMR bits */
-					edma_write_array(cc, EDMA_EMCR, j,
-							 BIT(i));
-					/* Clear any SER */
-					edma_shadow0_write_array(cc, SH_SECR,
-								j, BIT(i));
-					if (cc->intr_data[k].callback) {
-						cc->intr_data[k].callback(
-							EDMA_CTLR_CHAN(ctlr, k),
-							EDMA_DMA_CC_ERROR,
-							cc->intr_data[k].data);
-					}
-				}
-			}
-		} else if (edma_read(cc, EDMA_QEMR)) {
-			dev_dbg(cc->dev, "QEMR %02x\n",
-				edma_read(cc, EDMA_QEMR));
-			for (i = 0; i < 8; i++) {
-				if (edma_read(cc, EDMA_QEMR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(cc, EDMA_QEMCR, BIT(i));
-					edma_shadow0_write(cc, SH_QSECR,
-							   BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		} else if (edma_read(cc, EDMA_CCERR)) {
-			dev_dbg(cc->dev, "CCERR %08x\n",
-				edma_read(cc, EDMA_CCERR));
-			/* FIXME:  CCERR.BIT(16) ignored!  much better
-			 * to just write CCERRCLR with CCERR value...
-			 */
-			for (i = 0; i < 8; i++) {
-				if (edma_read(cc, EDMA_CCERR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(cc, EDMA_CCERRCLR, BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		}
-		if ((edma_read_array(cc, EDMA_EMR, 0) == 0) &&
-		    (edma_read_array(cc, EDMA_EMR, 1) == 0) &&
-		    (edma_read(cc, EDMA_QEMR) == 0) &&
-		    (edma_read(cc, EDMA_CCERR) == 0))
-			break;
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
-	edma_write(cc, EDMA_EEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-static int prepare_unused_channel_list(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct edma *cc = data;
-	int i, count;
-	struct of_phandle_args  dma_spec;
-
-	if (dev->of_node) {
-		struct platform_device *dma_pdev;
-
-		count = of_property_count_strings(dev->of_node, "dma-names");
-		if (count < 0)
-			return 0;
-		for (i = 0; i < count; i++) {
-
-			if (of_parse_phandle_with_args(dev->of_node, "dmas",
-						       "#dma-cells", i,
-						       &dma_spec))
-				continue;
-
-			if (!of_match_node(edma_of_ids, dma_spec.np)) {
-				of_node_put(dma_spec.np);
-				continue;
-			}
-
-			dma_pdev = of_find_device_by_node(dma_spec.np);
-			if (&dma_pdev->dev != cc->dev)
-				continue;
-
-			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
-				  cc->edma_unused);
-			of_node_put(dma_spec.np);
-		}
-		return 0;
-	}
-
-	/* For non-OF case */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource	*res = &pdev->resource[i];
-
-		if ((res->flags & IORESOURCE_DMA) && (int)res->start >= 0) {
-			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-				  cc->edma_unused);
-		}
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------*/
-
-/* Resource alloc/free:  dma channels, parameter RAM slots */
-
-/**
- * edma_alloc_channel - allocate DMA channel and paired parameter RAM
- * @channel: specific channel to allocate; negative for "any unmapped channel"
- * @callback: optional; to be issued on DMA completion or errors
- * @data: passed to callback
- * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
- *	Controller (TC) executes requests using this channel.  Use
- *	EVENTQ_DEFAULT unless you really need a high priority queue.
- *
- * This allocates a DMA channel and its associated parameter RAM slot.
- * The parameter RAM is initialized to hold a dummy transfer.
- *
- * Normal use is to pass a specific channel number as @channel, to make
- * use of hardware events mapped to that channel.  When the channel will
- * be used only for software triggering or event chaining, channels not
- * mapped to hardware events (or mapped to unused events) are preferable.
- *
- * DMA transfers start from a channel using edma_start(), or by
- * chaining.  When the transfer described in that channel's parameter RAM
- * slot completes, that slot's data may be reloaded through a link.
- *
- * DMA errors are only reported to the @callback associated with the
- * channel driving that transfer, but transfer completion callbacks can
- * be sent to another channel under control of the TCC field in
- * the option word of the transfer's parameter RAM set.  Drivers must not
- * use DMA transfer completion callbacks for channels they did not allocate.
- * (The same applies to TCC codes used in transfer chaining.)
- *
- * Returns the number of the channel, else negative errno.
- */
-int edma_alloc_channel(struct edma *cc, int channel,
-		void (*callback)(unsigned channel, u16 ch_status, void *data),
-		void *data,
-		enum dma_event_q eventq_no)
-{
-	unsigned done = 0;
-	int ret = 0;
-
-	if (!cc->unused_chan_list_done) {
-		/*
-		 * Scan all the platform devices to find out the EDMA channels
-		 * used and clear them in the unused list, making the rest
-		 * available for ARM usage.
-		 */
-		ret = bus_for_each_dev(&platform_bus_type, NULL, cc,
-				       prepare_unused_channel_list);
-		if (ret < 0)
-			return ret;
-
-		cc->unused_chan_list_done = true;
-	}
-
-	if (channel >= 0) {
-		if (cc->id != EDMA_CTLR(channel)) {
-			dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n",
-				__func__, cc->id, EDMA_CTLR(channel));
-			return -EINVAL;
-		}
-		channel = EDMA_CHAN_SLOT(channel);
-	}
-
-	if (channel < 0) {
-		channel = 0;
-		for (;;) {
-			channel = find_next_bit(cc->edma_unused,
-						cc->num_channels, channel);
-			if (channel == cc->num_channels)
-				break;
-			if (!test_and_set_bit(channel, cc->edma_inuse)) {
-				done = 1;
-				break;
-			}
-			channel++;
-		}
-		if (!done)
-			return -ENOMEM;
-	} else if (channel >= cc->num_channels) {
-		return -EINVAL;
-	} else if (test_and_set_bit(channel, cc->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	/* ensure access through shadow region 0 */
-	edma_or_array2(cc, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
-
-	/* ensure no events are pending */
-	edma_stop(cc, EDMA_CTLR_CHAN(cc->id, channel));
-	memcpy_toio(cc->base + PARM_OFFSET(channel), &dummy_paramset,
-		    PARM_SIZE);
-
-	if (callback)
-		setup_dma_interrupt(cc, EDMA_CTLR_CHAN(cc->id, channel),
-				    callback, data);
-
-	map_dmach_queue(cc, channel, eventq_no);
-
-	return EDMA_CTLR_CHAN(cc->id, channel);
-}
-EXPORT_SYMBOL(edma_alloc_channel);
-
-
-/**
- * edma_free_channel - deallocate DMA channel
- * @channel: dma channel returned from edma_alloc_channel()
- *
- * This deallocates the DMA channel and associated parameter RAM slot
- * allocated by edma_alloc_channel().
- *
- * Callers are responsible for ensuring the channel is inactive, and
- * will not be reactivated by linking, chaining, or software calls to
- * edma_start().
- */
-void edma_free_channel(struct edma *cc, unsigned channel)
-{
-
-	if (cc->id != EDMA_CTLR(channel)) {
-		dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n", __func__,
-			cc->id, EDMA_CTLR(channel));
-		return;
-	}
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= cc->num_channels)
-		return;
-
-	setup_dma_interrupt(cc, channel, NULL, NULL);
-	/* REVISIT should probably take out of shadow region 0 */
-
-	memcpy_toio(cc->base + PARM_OFFSET(channel), &dummy_paramset,
-		    PARM_SIZE);
-	clear_bit(channel, cc->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_channel);
-
-/**
- * edma_alloc_slot - allocate DMA parameter RAM
- * @slot: specific slot to allocate; negative for "any unused slot"
- *
- * This allocates a parameter RAM slot, initializing it to hold a
- * dummy transfer.  Slots allocated using this routine have not been
- * mapped to a hardware DMA channel, and will normally be used by
- * linking to them from a slot associated with a DMA channel.
- *
- * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
- * slots may be allocated on behalf of DSP firmware.
- *
- * Returns the number of the slot, else negative errno.
- */
-int edma_alloc_slot(struct edma *cc, int slot)
-{
-	if (slot > 0)
-		slot = EDMA_CHAN_SLOT(slot);
-	if (slot < 0) {
-		slot = cc->num_channels;
-		for (;;) {
-			slot = find_next_zero_bit(cc->edma_inuse, cc->num_slots,
-						  slot);
-			if (slot == cc->num_slots)
-				return -ENOMEM;
-			if (!test_and_set_bit(slot, cc->edma_inuse))
-				break;
-		}
-	} else if (slot < cc->num_channels || slot >= cc->num_slots) {
-		return -EINVAL;
-	} else if (test_and_set_bit(slot, cc->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	memcpy_toio(cc->base + PARM_OFFSET(slot), &dummy_paramset, PARM_SIZE);
-
-	return slot;
-}
-EXPORT_SYMBOL(edma_alloc_slot);
-
-/**
- * edma_free_slot - deallocate DMA parameter RAM
- * @slot: parameter RAM slot returned from edma_alloc_slot()
- *
- * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
- * Callers are responsible for ensuring the slot is inactive, and will
- * not be activated.
- */
-void edma_free_slot(struct edma *cc, unsigned slot)
-{
-
-	slot = EDMA_CHAN_SLOT(slot);
-	if (slot < cc->num_channels || slot >= cc->num_slots)
-		return;
-
-	memcpy_toio(cc->base + PARM_OFFSET(slot), &dummy_paramset, PARM_SIZE);
-	clear_bit(slot, cc->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_slot);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (i) -- read/write partial slots */
-
-/**
- * edma_get_position - returns the current transfer point
- * @slot: parameter RAM slot being examined
- * @dst:  true selects the dest position, false the source
- *
- * Returns the position of the current active slot
- */
-dma_addr_t edma_get_position(struct edma *cc, unsigned slot, bool dst)
-{
-	u32 offs;
-
-	slot = EDMA_CHAN_SLOT(slot);
-	offs = PARM_OFFSET(slot);
-	offs += dst ? PARM_DST : PARM_SRC;
-
-	return edma_read(cc, offs);
-}
-
-/**
- * edma_link - link one parameter RAM slot to another
- * @from: parameter RAM slot originating the link
- * @to: parameter RAM slot which is the link target
- *
- * The originating slot should not be part of any active DMA transfer.
- */
-void edma_link(struct edma *cc, unsigned from, unsigned to)
-{
-	from = EDMA_CHAN_SLOT(from);
-	to = EDMA_CHAN_SLOT(to);
-	if (from >= cc->num_slots || to >= cc->num_slots)
-		return;
-
-	edma_parm_modify(cc, PARM_LINK_BCNTRLD, from, 0xffff0000,
-			 PARM_OFFSET(to));
-}
-EXPORT_SYMBOL(edma_link);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (ii) -- read/write whole parameter sets */
-
-/**
- * edma_write_slot - write parameter RAM data for slot
- * @slot: number of parameter RAM slot being modified
- * @param: data to be written into parameter RAM slot
- *
- * Use this to assign all parameters of a transfer at once.  This
- * allows more efficient setup of transfers than issuing multiple
- * calls to set up those parameters in small pieces, and provides
- * complete control over all transfer options.
- */
-void edma_write_slot(struct edma *cc, unsigned slot,
-		     const struct edmacc_param *param)
-{
-	slot = EDMA_CHAN_SLOT(slot);
-	if (slot >= cc->num_slots)
-		return;
-	memcpy_toio(cc->base + PARM_OFFSET(slot), param, PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_write_slot);
-
-/**
- * edma_read_slot - read parameter RAM data from slot
- * @slot: number of parameter RAM slot being copied
- * @param: where to store copy of parameter RAM data
- *
- * Use this to read data from a parameter RAM slot, perhaps to
- * save them as a template for later reuse.
- */
-void edma_read_slot(struct edma *cc, unsigned slot, struct edmacc_param *param)
-{
-	slot = EDMA_CHAN_SLOT(slot);
-	if (slot >= cc->num_slots)
-		return;
-	memcpy_fromio(param, cc->base + PARM_OFFSET(slot), PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_read_slot);
-
-/*-----------------------------------------------------------------------*/
-
-/* Various EDMA channel control operations */
-
-/**
- * edma_pause - pause dma on a channel
- * @channel: on which edma_start() has been called
- *
- * This temporarily disables EDMA hardware events on the specified channel,
- * preventing them from triggering new transfers on its behalf
- */
-void edma_pause(struct edma *cc, unsigned channel)
-{
-	if (cc->id != EDMA_CTLR(channel)) {
-		dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n", __func__,
-			cc->id, EDMA_CTLR(channel));
-		return;
-	}
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < cc->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(cc, SH_EECR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_pause);
-
-/**
- * edma_resume - resumes dma on a paused channel
- * @channel: on which edma_pause() has been called
- *
- * This re-enables EDMA hardware events on the specified channel.
- */
-void edma_resume(struct edma *cc, unsigned channel)
-{
-	if (cc->id != EDMA_CTLR(channel)) {
-		dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n", __func__,
-			cc->id, EDMA_CTLR(channel));
-		return;
-	}
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < cc->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(cc, SH_EESR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_resume);
-
-int edma_trigger_channel(struct edma *cc, unsigned channel)
-{
-	unsigned int mask;
-
-	if (cc->id != EDMA_CTLR(channel)) {
-		dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n", __func__,
-			cc->id, EDMA_CTLR(channel));
-		return -EINVAL;
-	}
-	channel = EDMA_CHAN_SLOT(channel);
-	mask = BIT(channel & 0x1f);
-
-	edma_shadow0_write_array(cc, SH_ESR, (channel >> 5), mask);
-
-	pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
-		 edma_shadow0_read_array(cc, SH_ESR, (channel >> 5)));
-	return 0;
-}
-EXPORT_SYMBOL(edma_trigger_channel);
-
-/**
- * edma_start - start dma on a channel
- * @channel: channel being activated
- *
- * Channels with event associations will be triggered by their hardware
- * events, and channels without such associations will be triggered by
- * software.  (At this writing there is no interface for using software
- * triggers except with channels that don't support hardware triggers.)
- *
- * Returns zero on success, else negative errno.
- */
-int edma_start(struct edma *cc, unsigned channel)
-{
-	if (cc->id != EDMA_CTLR(channel)) {
-		dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n", __func__,
-			cc->id, EDMA_CTLR(channel));
-		return -EINVAL;
-	}
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < cc->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		/* EDMA channels without event association */
-		if (test_bit(channel, cc->edma_unused)) {
-			pr_debug("EDMA: ESR%d %08x\n", j,
-				 edma_shadow0_read_array(cc, SH_ESR, j));
-			edma_shadow0_write_array(cc, SH_ESR, j, mask);
-			return 0;
-		}
-
-		/* EDMA channel with event association */
-		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(cc, SH_ER, j));
-		/* Clear any pending event or error */
-		edma_write_array(cc, EDMA_ECR, j, mask);
-		edma_write_array(cc, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(cc, SH_SECR, j, mask);
-		edma_shadow0_write_array(cc, SH_EESR, j, mask);
-		pr_debug("EDMA: EER%d %08x\n", j,
-			 edma_shadow0_read_array(cc, SH_EER, j));
-		return 0;
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(edma_start);
-
-/**
- * edma_stop - stops dma on the channel passed
- * @channel: channel being deactivated
- *
- * When @lch is a channel, any active transfer is paused and
- * all pending hardware events are cleared.  The current transfer
- * may not be resumed, and the channel's Parameter RAM should be
- * reinitialized before being reused.
- */
-void edma_stop(struct edma *cc, unsigned channel)
-{
-	if (cc->id != EDMA_CTLR(channel)) {
-		dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n", __func__,
-			cc->id, EDMA_CTLR(channel));
-		return;
-	}
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < cc->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(cc, SH_EECR, j, mask);
-		edma_shadow0_write_array(cc, SH_ECR, j, mask);
-		edma_shadow0_write_array(cc, SH_SECR, j, mask);
-		edma_write_array(cc, EDMA_EMCR, j, mask);
-
-		/* clear possibly pending completion interrupt */
-		edma_shadow0_write_array(cc, SH_ICR, j, mask);
-
-		pr_debug("EDMA: EER%d %08x\n", j,
-			 edma_shadow0_read_array(cc, SH_EER, j));
-
-		/* REVISIT:  consider guarding against inappropriate event
-		 * chaining by overwriting with dummy_paramset.
-		 */
-	}
-}
-EXPORT_SYMBOL(edma_stop);
-
-/******************************************************************************
- *
- * It cleans ParamEntry qand bring back EDMA to initial state if media has
- * been removed before EDMA has finished.It is usedful for removable media.
- * Arguments:
- *      ch_no     - channel no
- *
- * Return: zero on success, or corresponding error no on failure
- *
- * FIXME this should not be needed ... edma_stop() should suffice.
- *
- *****************************************************************************/
-
-void edma_clean_channel(struct edma *cc, unsigned channel)
-{
-	if (cc->id != EDMA_CTLR(channel)) {
-		dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n", __func__,
-			cc->id, EDMA_CTLR(channel));
-		return;
-	}
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < cc->num_channels) {
-		int j = (channel >> 5);
-		unsigned int mask = BIT(channel & 0x1f);
-
-		pr_debug("EDMA: EMR%d %08x\n", j,
-			 edma_read_array(cc, EDMA_EMR, j));
-		edma_shadow0_write_array(cc, SH_ECR, j, mask);
-		/* Clear the corresponding EMR bits */
-		edma_write_array(cc, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(cc, SH_SECR, j, mask);
-		edma_write(cc, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
-	}
-}
-EXPORT_SYMBOL(edma_clean_channel);
-
-/*
- * edma_assign_channel_eventq - move given channel to desired eventq
- * Arguments:
- *	channel - channel number
- *	eventq_no - queue to move the channel
- *
- * Can be used to move a channel to a selected event queue.
- */
-void edma_assign_channel_eventq(struct edma *cc, unsigned channel,
-				enum dma_event_q eventq_no)
-{
-	if (cc->id != EDMA_CTLR(channel)) {
-		dev_err(cc->dev, "%s: ID mismatch for eDMA%d: %d\n", __func__,
-			cc->id, EDMA_CTLR(channel));
-		return;
-	}
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= cc->num_channels)
-		return;
-
-	/* default to low priority queue */
-	if (eventq_no == EVENTQ_DEFAULT)
-		eventq_no = cc->default_queue;
-	if (eventq_no >= cc->num_tc)
-		return;
-
-	map_dmach_queue(cc, channel, eventq_no);
-}
-EXPORT_SYMBOL(edma_assign_channel_eventq);
-
-struct edma *edma_get_data(struct device *edma_dev)
-{
-	return dev_get_drvdata(edma_dev);
-}
-
-
-static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
-			      struct edma *edma_cc, int cc_id)
-{
-	int i;
-	u32 value, cccfg;
-	s8 (*queue_priority_map)[2];
-
-	/* Decode the eDMA3 configuration from CCCFG register */
-	cccfg = edma_read(edma_cc, EDMA_CCCFG);
-
-	value = GET_NUM_REGN(cccfg);
-	edma_cc->num_region = BIT(value);
-
-	value = GET_NUM_DMACH(cccfg);
-	edma_cc->num_channels = BIT(value + 1);
-
-	value = GET_NUM_PAENTRY(cccfg);
-	edma_cc->num_slots = BIT(value + 4);
-
-	value = GET_NUM_EVQUE(cccfg);
-	edma_cc->num_tc = value + 1;
-
-	dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id,
-		cccfg);
-	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
-	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
-	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
-	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
-
-	/* Nothing need to be done if queue priority is provided */
-	if (pdata->queue_priority_mapping)
-		return 0;
-
-	/*
-	 * Configure TC/queue priority as follows:
-	 * Q0 - priority 0
-	 * Q1 - priority 1
-	 * Q2 - priority 2
-	 * ...
-	 * The meaning of priority numbers: 0 highest priority, 7 lowest
-	 * priority. So Q0 is the highest priority queue and the last queue has
-	 * the lowest priority.
-	 */
-	queue_priority_map = devm_kzalloc(dev,
-					  (edma_cc->num_tc + 1) * sizeof(s8),
-					  GFP_KERNEL);
-	if (!queue_priority_map)
-		return -ENOMEM;
-
-	for (i = 0; i < edma_cc->num_tc; i++) {
-		queue_priority_map[i][0] = i;
-		queue_priority_map[i][1] = i;
-	}
-	queue_priority_map[i][0] = -1;
-	queue_priority_map[i][1] = -1;
-
-	pdata->queue_priority_mapping = queue_priority_map;
-	/* Default queue has the lowest priority */
-	pdata->default_queue = i - 1;
-
-	return 0;
-}
-
-#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
-
-static int edma_xbar_event_map(struct device *dev, struct device_node *node,
-			       struct edma_soc_info *pdata, size_t sz)
-{
-	const char pname[] = "ti,edma-xbar-event-map";
-	struct resource res;
-	void __iomem *xbar;
-	s16 (*xbar_chans)[2];
-	size_t nelm = sz / sizeof(s16);
-	u32 shift, offset, mux;
-	int ret, i;
-
-	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
-	if (!xbar_chans)
-		return -ENOMEM;
-
-	ret = of_address_to_resource(node, 1, &res);
-	if (ret)
-		return -ENOMEM;
-
-	xbar = devm_ioremap(dev, res.start, resource_size(&res));
-	if (!xbar)
-		return -ENOMEM;
-
-	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
-	if (ret)
-		return -EIO;
-
-	/* Invalidate last entry for the other user of this mess */
-	nelm >>= 1;
-	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
-
-	for (i = 0; i < nelm; i++) {
-		shift = (xbar_chans[i][1] & 0x03) << 3;
-		offset = xbar_chans[i][1] & 0xfffffffc;
-		mux = readl(xbar + offset);
-		mux &= ~(0xff << shift);
-		mux |= xbar_chans[i][0] << shift;
-		writel(mux, (xbar + offset));
-	}
-
-	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
-	return 0;
-}
-
-static int edma_of_parse_dt(struct device *dev,
-			    struct device_node *node,
-			    struct edma_soc_info *pdata)
-{
-	int ret = 0;
-	struct property *prop;
-	size_t sz;
-	struct edma_rsv_info *rsv_info;
-
-	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
-	if (!rsv_info)
-		return -ENOMEM;
-	pdata->rsv = rsv_info;
-
-	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
-	if (prop)
-		ret = edma_xbar_event_map(dev, node, pdata, sz);
-
-	return ret;
-}
-
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	struct edma_soc_info *info;
-	int ret;
-
-	info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL);
-	if (!info)
-		return ERR_PTR(-ENOMEM);
-
-	ret = edma_of_parse_dt(dev, node, info);
-	if (ret)
-		return ERR_PTR(ret);
-
-	return info;
-}
-#else
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	return ERR_PTR(-ENOSYS);
-}
-#endif
-
-static int edma_probe(struct platform_device *pdev)
-{
-	struct edma_soc_info	*info = pdev->dev.platform_data;
-	s8		(*queue_priority_mapping)[2];
-	int			i, off, ln;
-	const s16		(*rsv_chans)[2];
-	const s16		(*rsv_slots)[2];
-	const s16		(*xbar_chans)[2];
-	int			irq;
-	char			*irq_name;
-	struct resource		*mem;
-	struct device_node	*node = pdev->dev.of_node;
-	struct device		*dev = &pdev->dev;
-	int			dev_id = pdev->id;
-	struct edma		*cc;
-	int			ret;
-	struct platform_device_info edma_dev_info = {
-		.name = "edma-dma-engine",
-		.dma_mask = DMA_BIT_MASK(32),
-		.parent = &pdev->dev,
-	};
-
-	if (node) {
-		info = edma_setup_info_from_dt(dev, node);
-		if (IS_ERR(info)) {
-			dev_err(dev, "failed to get DT data\n");
-			return PTR_ERR(info);
-		}
-	}
-
-	if (!info)
-		return -ENODEV;
-
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
-	mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma3_cc");
-	if (!mem) {
-		dev_dbg(dev, "mem resource not found, using index 0\n");
-		mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (!mem) {
-			dev_err(dev, "no mem resource?\n");
-			return -ENODEV;
-		}
-	}
-
-	cc = devm_kzalloc(dev, sizeof(struct edma), GFP_KERNEL);
-	if (!cc)
-		return -ENOMEM;
-
-	cc->dev = dev;
-	cc->id = dev_id;
-	/* When booting with DT the pdev->id is -1 */
-	if (dev_id < 0) {
-		cc->id = 0;
-		dev_id = arch_num_cc;
-	}
-	dev_set_drvdata(dev, cc);
-
-	cc->base = devm_ioremap_resource(dev, mem);
-	if (IS_ERR(cc->base))
-		return PTR_ERR(cc->base);
-
-	/* Get eDMA3 configuration from IP */
-	ret = edma_setup_from_hw(dev, info, cc, dev_id);
-	if (ret)
-		return ret;
-
-	cc->default_queue = info->default_queue;
-
-	for (i = 0; i < cc->num_slots; i++)
-		memcpy_toio(cc->base + PARM_OFFSET(i), &dummy_paramset,
-			    PARM_SIZE);
-
-	/* Mark all channels as unused */
-	memset(cc->edma_unused, 0xff, sizeof(cc->edma_unused));
-
-	if (info->rsv) {
-
-		/* Clear the reserved channels in unused list */
-		rsv_chans = info->rsv->rsv_chans;
-		if (rsv_chans) {
-			for (i = 0; rsv_chans[i][0] != -1; i++) {
-				off = rsv_chans[i][0];
-				ln = rsv_chans[i][1];
-				clear_bits(off, ln, cc->edma_unused);
-			}
-		}
-
-		/* Set the reserved slots in inuse list */
-		rsv_slots = info->rsv->rsv_slots;
-		if (rsv_slots) {
-			for (i = 0; rsv_slots[i][0] != -1; i++) {
-				off = rsv_slots[i][0];
-				ln = rsv_slots[i][1];
-				set_bits(off, ln, cc->edma_inuse);
-			}
-		}
-	}
-
-	/* Clear the xbar mapped channels in unused list */
-	xbar_chans = info->xbar_chans;
-	if (xbar_chans) {
-		for (i = 0; xbar_chans[i][1] != -1; i++) {
-			off = xbar_chans[i][1];
-			clear_bits(off, 1, cc->edma_unused);
-		}
-	}
-
-	irq = platform_get_irq_byname(pdev, "edma3_ccint");
-	if (irq < 0 && node)
-		irq = irq_of_parse_and_map(node, 0);
-
-	if (irq >= 0) {
-		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
-					  dev_name(dev));
-		ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
-				       cc);
-		if (ret) {
-			dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
-			return ret;
-		}
-	}
-
-	irq = platform_get_irq_byname(pdev, "edma3_ccerrint");
-	if (irq < 0 && node)
-		irq = irq_of_parse_and_map(node, 2);
-
-	if (irq >= 0) {
-		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
-					  dev_name(dev));
-		ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
-				       cc);
-		if (ret) {
-			dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
-			return ret;
-		}
-	}
-
-	for (i = 0; i < cc->num_channels; i++)
-		map_dmach_queue(cc, i, info->default_queue);
-
-	queue_priority_mapping = info->queue_priority_mapping;
-
-	/* Event queue priority mapping */
-	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-		assign_priority_to_queue(cc, queue_priority_mapping[i][0],
-					 queue_priority_mapping[i][1]);
-
-	/* Map the channel to param entry if channel mapping logic exist */
-	if (edma_read(cc, EDMA_CCCFG) & CHMAP_EXIST)
-		map_dmach_param(cc);
-
-	for (i = 0; i < cc->num_region; i++) {
-		edma_write_array2(cc, EDMA_DRAE, i, 0, 0x0);
-		edma_write_array2(cc, EDMA_DRAE, i, 1, 0x0);
-		edma_write_array(cc, EDMA_QRAE, i, 0x0);
-	}
-	cc->info = info;
-	arch_num_cc++;
-
-	edma_dev_info.id = dev_id;
-
-	platform_device_register_full(&edma_dev_info);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int edma_pm_resume(struct device *dev)
-{
-	struct edma *cc = dev_get_drvdata(dev);
-	int i;
-	s8 (*queue_priority_mapping)[2];
-
-	queue_priority_mapping = cc->info->queue_priority_mapping;
-
-	/* Event queue priority mapping */
-	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-		assign_priority_to_queue(cc, queue_priority_mapping[i][0],
-					 queue_priority_mapping[i][1]);
-
-	/* Map the channel to param entry if channel mapping logic */
-	if (edma_read(cc, EDMA_CCCFG) & CHMAP_EXIST)
-		map_dmach_param(cc);
-
-	for (i = 0; i < cc->num_channels; i++) {
-		if (test_bit(i, cc->edma_inuse)) {
-			/* ensure access through shadow region 0 */
-			edma_or_array2(cc, EDMA_DRAE, 0, i >> 5, BIT(i & 0x1f));
-
-			setup_dma_interrupt(cc, EDMA_CTLR_CHAN(cc->id, i),
-					    cc->intr_data[i].callback,
-					    cc->intr_data[i].data);
-		}
-	}
-
-	return 0;
-}
-#endif
-
-static const struct dev_pm_ops edma_pm_ops = {
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume)
-};
-
-static struct platform_driver edma_driver = {
-	.driver = {
-		.name	= "edma",
-		.pm	= &edma_pm_ops,
-		.of_match_table = edma_of_ids,
-	},
-	.probe = edma_probe,
-};
-
-static int __init edma_init(void)
-{
-	return platform_driver_probe(&edma_driver, edma_probe);
-}
-arch_initcall(edma_init);
-