Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2021-09-01 15:39:09 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2021-09-01 15:39:09 -0700
commit: 7c636d4d20f8c5acfbfbc60f326fddb0e1cf5daa (patch)
tree: ccd1b1f27386ce7768cac58fc420be62c3bb60ca /arch/arm/boot
parent: 32b47072f319bb65e9afad59e78153d83496f1f5 (diff)
parent: 9e62ec0e661ca7161e5830bdbf8e69831b41e866 (diff)
223 files changed, 14295 insertions, 1713 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 863347b6b65e..7e0934180724 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -74,6 +74,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d4_xplained.dtb \
 	at91-sama5d4ek.dtb \
 	at91-vinco.dtb
+dtb-$(CONFIG_SOC_SAMA7G5) += \
+	at91-sama7g5ek.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
@@ -241,8 +243,20 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorcp.dtb
 dtb-$(CONFIG_ARCH_IXP4XX) += \
 	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp42x-linksys-wrv54g.dtb \
+	intel-ixp42x-freecom-fsg-3.dtb \
 	intel-ixp42x-welltech-epbx100.dtb \
-	intel-ixp43x-gateworks-gw2358.dtb
+	intel-ixp42x-ixdp425.dtb \
+	intel-ixp43x-kixrp435.dtb \
+	intel-ixp46x-ixdp465.dtb \
+	intel-ixp42x-adi-coyote.dtb \
+	intel-ixp42x-ixdpg425.dtb \
+	intel-ixp42x-iomega-nas100d.dtb \
+	intel-ixp42x-dlink-dsm-g600.dtb \
+	intel-ixp42x-gateworks-gw2348.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb \
+	intel-ixp42x-netgear-wg302v2.dtb \
+	intel-ixp42x-arcom-vulcan.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
 	keystone-k2hk-evm.dtb \
 	keystone-k2l-evm.dtb \
@@ -429,6 +443,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-cubox-i-emmc-som-v15.dtb \
 	imx6dl-cubox-i-som-v15.dtb \
 	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-dhcom-picoitx.dtb \
 	imx6dl-eckelmann-ci4x10.dtb \
 	imx6dl-emcon-avari.dtb \
 	imx6dl-gw51xx.dtb \
@@ -475,6 +490,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-savageboard.dtb \
+	imx6dl-skov-revc-lt2.dtb \
+	imx6dl-skov-revc-lt6.dtb \
+	imx6dl-solidsense.dtb \
 	imx6dl-ts4900.dtb \
 	imx6dl-ts7970.dtb \
 	imx6dl-tx6dl-comtft.dtb \
@@ -575,6 +593,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-sabresd.dtb \
 	imx6q-savageboard.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-skov-revc-lt2.dtb \
+	imx6q-skov-revc-lt6.dtb \
+	imx6q-skov-reve-mi1010ait-1cp1.dtb \
+	imx6q-solidsense.dtb \
 	imx6q-tbs2910.dtb \
 	imx6q-ts4900.dtb \
 	imx6q-ts7970.dtb \
@@ -607,7 +629,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6qp-tx6qp-8137-mb7.dtb \
 	imx6qp-vicutp.dtb \
 	imx6qp-wandboard-revd1.dtb \
-	imx6qp-zii-rdu2.dtb
+	imx6qp-zii-rdu2.dtb \
+	imx6s-dhcom-drc02.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-tolino-shine2hd.dtb \
@@ -843,6 +866,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-pocketbeagle.dtb \
 	am335x-regor-rdk.dtb \
 	am335x-sancloud-bbe.dtb \
+	am335x-sancloud-bbe-lite.dtb \
 	am335x-shc.dtb \
 	am335x-sbc-t335.dtb \
 	am335x-sl50.dtb \
@@ -933,6 +957,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk07.1-c2.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8226-samsung-s3ve3g.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-fairphone-fp2.dtb \
@@ -1076,7 +1101,8 @@ dtb-$(CONFIG_ARCH_STI) += \
 	stih407-b2120.dtb \
 	stih410-b2120.dtb \
 	stih410-b2260.dtb \
-	stih418-b2199.dtb
+	stih418-b2199.dtb \
+	stih418-b2264.dtb
 dtb-$(CONFIG_ARCH_STM32) += \
 	stm32f429-disco.dtb \
 	stm32f469-disco.dtb \
@@ -1300,7 +1326,10 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-href520-tvk.dtb \
 	ste-ux500-samsung-golden.dtb \
 	ste-ux500-samsung-janice.dtb \
-	ste-ux500-samsung-skomer.dtb
+	ste-ux500-samsung-gavini.dtb \
+	ste-ux500-samsung-codina.dtb \
+	ste-ux500-samsung-skomer.dtb \
+	ste-ux500-samsung-kyle.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld4-ref.dtb \
 	uniphier-ld6b-ref.dtb \
@@ -1433,7 +1462,10 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-facebook-cloudripper.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
 	aspeed-bmc-facebook-galaxy100.dtb \
 	aspeed-bmc-facebook-minipack.dtb \
 	aspeed-bmc-facebook-tiogapass.dtb \
@@ -1448,6 +1480,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-ibm-rainier-4u.dtb \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 56915b6d818d..daf4cb398070 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -58,21 +58,21 @@
 	dr_mode = "host";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index d8d60398d803..2123bd589484 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -103,18 +103,18 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	fixed-link {
 		speed = <100>;
 		full-duplex;
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 8096d459b93f..2f3872dbf4f4 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -120,18 +120,18 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	fixed-link {
 		speed = <100>;
 		full-duplex;
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 1103a2cb836f..366702630290 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -339,16 +339,15 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 2d51d4bba6d4..0ccdc7cd463b 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -353,24 +353,27 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&mac {
-	slaves = <1>;
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
@@ -397,3 +400,7 @@
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
 };
+
+&pruss_tm {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 64c3e9269f40..10494c4431b9 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -3,9 +3,6 @@
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
-#include <dt-bindings/display/tda998x.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
 &ldo3_reg {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -25,145 +22,13 @@
 	non-removable;
 };
 
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-
-	mcasp0_pins: mcasp0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	/* If you want to get 24 bit RGB and 16 BGR mode instead of
-	 * current 16 bit RGB and 24 BGR modes, set the propety
-	 * below to "crossed" and uncomment the video-ports -property
-	 * in tda19988 node.
-	 */
-	blue-and-red-wiring = "straight";
-
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <&hdmi_0>;
-		};
-	};
-};
-
-&i2c0 {
-	tda19988: tda19988@70 {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		nxp,calib-gpios = <&gpio1 25 0>;
-		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
-		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
-		/* video-ports = <0x234501>; */
-
-		#sound-dai-cells = <0>;
-		audio-ports = <	TDA998x_I2S	0x03>;
-
-		ports {
-			port@0 {
-				hdmi_0: endpoint@0 {
-					remote-endpoint = <&lcdc_0>;
-				};
-			};
-		};
-	};
-};
-
 &rtc {
 	system-power-controller;
 };
 
-&mcasp0	{
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 0
-		>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
 / {
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
-
-	clk_mcasp0_fixed: clk_mcasp0_fixed {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	clk_mcasp0: clk_mcasp0 {
-		#clock-cells = <0>;
-		compatible = "gpio-gate-clock";
-		clocks = <&clk_mcasp0_fixed>;
-		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "TI BeagleBone Black";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-
-		dailink0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			clocks = <&clk_mcasp0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tda19988>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
new file mode 100644
index 000000000000..7cfddada9348
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 */
+	blue-and-red-wiring = "straight";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&i2c0 {
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		nxp,calib-gpios = <&gpio1 25 0>;
+		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		ports {
+			port@0 {
+				hdmi_0: endpoint@0 {
+					remote-endpoint = <&lcdc_0>;
+				};
+			};
+		};
+	};
+};
+
+&mcasp0	{
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk_mcasp0_fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk_mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 80116646a3fe..c72b09ab8da0 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -7,6 +7,7 @@
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
 #include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -62,7 +63,7 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index e2ee8b8c07bc..9312197316f0 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -7,6 +7,7 @@
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
 #include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
 
 / {
 	model = "TI AM335x BeagleBone Black";
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 0afcc2ee0b63..c6bb325ead33 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -435,12 +435,153 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		"UART3_CTS", /* M17 */
+		"UART3_RTS", /* M18 */
+		"UART2_RX", /* A17 */
+		"UART2_TX", /* B17 */
+		"I2C1_SDA", /* B16 */
+		"I2C1_SCL", /* A16 */
+		"MMC0_CD", /* C15 */
+		"SPI1_SS2", /* C18 */
+		"EQEP_1A", /* V2 */
+		"EQEP_1B", /* V3 */
+		"MDIR_2B", /* V4 */
+		"BATT_LED_2", /* T5 */
+		"I2C2_SDA", /* D18 */
+		"I2C2_SCL", /* D17 */
+		"UART1_RX", /* D16 */
+		"UART1_TX", /* D15 */
+		"MMC2_DAT1", /* J18 */
+		"MMC2_DAT2", /* K15 */
+		"NC", /* F16 */
+		"WIFI_LED", /* A15 */
+		"MOT_STBY", /* D14 */
+		"WLAN_IRQ", /* K16 */
+		"PWM_2A", /* U10 */
+		"PWM_2B", /* T10 */
+		"",
+		"",
+		"BATT_LED_4", /* T11 */
+		"BATT_LED_1", /* U12 */
+		"BT_EN", /* K17 */
+		"SPI1_SS1", /* H18 */
+		"UART4_RX", /* T17 */
+		"MDIR_1B"; /* U17 */
+};
+
+&gpio1 {
+	gpio-line-names =
+		"MMC1_DAT0", /* U7 */
+		"MMC1_DAT1", /* V7 */
+		"MMC1_DAT2", /* R8 */
+		"MMC1_DAT3", /* T8 */
+		"MMC1_DAT4", /* U8 */
+		"MMC1_DAT5", /* V8 */
+		"MMC1_DAT6", /* R9 */
+		"MMC1_DAT7", /* T9 */
+		"DCAN1_TX", /* E18 */
+		"DCAN1_RX", /* E17 */
+		"UART0_RX", /* E15 */
+		"UART0_TX", /* E16 */
+		"EQEP_2A", /* T12 */
+		"EQEP_2B", /* R12 */
+		"PRU_E_A", /* V13 */
+		"PRU_E_B", /* U13 */
+		"MDIR_2A", /* R13 */
+		"GPIO1_17", /* V14 */
+		"PWM_1A", /* U14 */
+		"PWM_1B", /* T14 */
+		"EMMC_RST", /* R14 */
+		"USR_LED_0", /* V15 */
+		"USR_LED_1", /* U15 */
+		"USR_LED_2", /* T15 */
+		"USR_LED_3", /* V16 */
+		"GPIO1_25", /* U16 */
+		"MCASP0_AXR0", /* T16 */
+		"MCASP0_AXR1", /* V17 */
+		"MCASP0_ACLKR", /* U18 */
+		"BATT_LED_3", /* V6 */
+		"MMC1_CLK", /* U9 */
+		"MMC1_CMD"; /* V9 */
+};
+
+&gpio2 {
+	gpio-line-names =
+		"MDIR_1A", /* T13 */
+		"MCASP0_FSR", /* V12 */
+		"LED_RED", /* R7 */
+		"LED_GREEN", /* T7 */
+		"MODE_BTN", /* U6 */
+		"PAUSE_BTN", /* T6 */
+		"MDIR_4A", /* R1 */
+		"MDIR_4B", /* R2 */
+		"MDIR_3B", /* R3 */
+		"MDIR_3A", /* R4 */
+		"SVO7", /* T1 */
+		"SVO8", /* T2 */
+		"SVO5", /* T3 */
+		"SVO6", /* T4 */
+		"UART5_TX", /* U1 */
+		"UART5_RX", /* U2 */
+		"SERVO_EN", /* U3 */
+		"NC", /* U4 */
+		"UART3_RX", /* L17 */
+		"UART3_TX", /* L16 */
+		"MMC2_CLK", /* L15 */
+		"DCAN1_SILENT", /* M16 */
+		"SVO1", /* U5 */
+		"SVO3", /* R5 */
+		"SVO2", /* V5 */
+		"SVO4", /* R6 */
+		"MMC0_DAT3", /* F17 */
+		"MMC0_DAT2", /* F18 */
+		"MMC0_DAT1", /* G15 */
+		"MMC0_DAT0", /* G16 */
+		"MMC0_CLK", /* G17 */
+		"MMC0_CMD"; /* G18 */
+};
+
 &gpio3 {
+	gpio-line-names =
+		"MMC2_DAT3", /* H16 */
+		"GPIO3_1", /* H17 */
+		"GPIO3_2", /* J15 */
+		"MMC2_CMD", /* J16 */
+		"MMC2_DAT0", /* J17 */
+		"I2C0_SDA", /* C17 */
+		"I2C0_SCL", /* C16 */
+		"EMU1", /* C14 */
+		"EMU0", /* B14 */
+		"WL_EN", /* K18 */
+		"WL_BT_OE", /* L18 */
+		"",
+		"",
+		"NC", /* F15 */
+		"SPI1_SCK", /* A13 */
+		"SPI1_MISO", /* B13 */
+		"SPI1_MOSI", /* D12 */
+		"GPIO3_17", /* C12 */
+		"EQEP_0A", /* B12 */
+		"EQEP_0B", /* C13 */
+		"GPIO3_20", /* D13 */
+		"IMU_INT", /* A14 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
 	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "LS_BUF_EN";
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 74db0fc39397..215f279e476b 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -62,7 +62,7 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 5660b5f6942d..a223cdd3e30e 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -128,28 +128,31 @@
 };
 
 /* Ethernet */
-&mac {
-	slaves = <1>;
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
 /* USB */
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 688e14e82eba..d9f003d886bf 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -413,28 +413,31 @@ status = "okay";
 	status = "okay";
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	slaves = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 9cf39c93defb..659e99eabe66 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -778,3 +778,7 @@
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
 };
+
+&pruss_tm {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 001657be0381..a2db65538e51 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -715,3 +715,7 @@
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
 };
+
+&pruss_tm {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 5e598ac96dcc..e5ce89c8f54d 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -508,3 +508,7 @@
 		reg = <3>;
 	};
 };
+
+&pruss_tm {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 7ec23d47a429..cc14415a4eb9 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -93,12 +93,11 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 };
 
-&davinci_mdio {
-	status = "okay";
+&davinci_mdio_sw {
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
@@ -109,15 +108,16 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
+	ti,dual-emac-pvid = <2>;
 };
 
 &elm {
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 0f078465297a..1282dae144dd 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -295,31 +295,29 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <3>;
+	ti,dual-emac-pvid = <3>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@5 {
 		reg = <5>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 8121a199607c..11e8f64b6606 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -122,24 +122,24 @@
 	regulator-max-microvolt = <5000000>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
+&cpsw_port2 {
+	ti,dual-emac-pvid = <2>;
 };
 
 &sham {
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
index 5923b6e7e1cb..1cc513ed92cc 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
@@ -52,18 +52,17 @@
 	};
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@4 {
 		reg = <4>;
 	};
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rmii";
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 39e5d2ce600a..a7269b90d795 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -310,17 +310,15 @@
 	regulator-max-microvolt = <5000000>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@4 {
 		reg = <4>;
@@ -331,18 +329,16 @@
 	};
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &sham {
diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
index 270a3d5e8f98..245c35f41cdf 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
+++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
@@ -57,16 +57,27 @@
 	};
 };
 
-&cpsw_emac0 {
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_slave1_pins_default>;
+	pinctrl-1 = <&eth_slave1_pins_sleep>;
+	status = "okay";
+};
+
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mdio_pins_default>;
 	pinctrl-1 = <&mdio_pins_sleep>;
-	status = "okay";
 
 	phy0: ethernet-phy@4 {
 		reg = <4>;
@@ -137,14 +148,6 @@
 	};
 };
 
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&eth_slave1_pins_default>;
-	pinctrl-1 = <&eth_slave1_pins_sleep>;
-	slaves = <1>;
-	status = "okay";
-};
-
 &rtc {
 	system-power-controller;
 };
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts
index c996639874e6..1479fd95dec2 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts
@@ -86,18 +86,26 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
+	status = "okay";
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@6 {
 		reg = <6>;
 		eee-broken-1000t;
 	};
 };
 
+&mac_sw {
+	pinctrl-0 = <&eth_slave1_pins_default>, <&eth_slave2_pins_default>;
+	pinctrl-1 = <&eth_slave1_pins_sleep>, <&eth_slave2_pins_sleep>;
+	slaves = <2>;
+};
+
 &dcan0 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan0_pins_default>;
@@ -194,12 +202,6 @@
 	};
 };
 
-&mac {
-	pinctrl-0 = <&eth_slave1_pins_default>, <&eth_slave2_pins_default>;
-	pinctrl-1 = <&eth_slave1_pins_sleep>, <&eth_slave2_pins_sleep>;
-	slaves = <2>;
-};
-
 &mcasp0 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp0_pins_default>;
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 0dbc72d726c9..b6f2567bd65a 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -369,12 +369,11 @@
 	};
 };
 
-&mac {
-	dual_emac;
+&mac_sw {
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
@@ -386,16 +385,16 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
index 8303b832aa50..57e756b0f192 100644
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -61,21 +61,21 @@
 	dr_mode = "host";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
index f8e0e95a751f..c6cc1c6218a9 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -76,20 +76,20 @@
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
index a4e137527215..96dffd3ffd85 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -96,20 +96,20 @@
 	};
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 5403e47c07e2..605b2a436edf 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -391,24 +391,27 @@
 	clock-frequency = <100000>;
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
 };
 
-&mac {
-	slaves = <1>;
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@4 {
 		reg = <4>;
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 6c547c83e5dd..124026fa0d09 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -123,24 +123,22 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@2 {
 		reg = <2>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac;
 };
 
 /* Misc */
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index d41a5ffd83cf..b793beeab245 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -494,17 +494,15 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
-	dual_emac;			/* no switch, two distinct MACs */
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
@@ -515,16 +513,16 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &tscadc {
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index f9a027b47962..b5e88e627bc1 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -260,20 +260,19 @@
 };
 
 /* Ethernet */
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
-	status = "okay";
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
 
@@ -286,13 +285,12 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet_pins>;
 };
 
-
 &am33xx_pinmux {
 	ethernet_pins: pinmux_ethernet {
 		pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 7e46b4c02709..f65cd1331315 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -97,24 +97,26 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&davinci_mdio {
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
 
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
 
-&mac {
-	slaves = <1>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
index 6fbf4ac739e7..7b3966ee51b9 100644
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -85,23 +85,22 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
+	status = "okay";
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac = <1>;
 };
 
 /* GPIOs */
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
new file mode 100644
index 000000000000..f9b7e774ac48
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&am33xx_pinmux {
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	usb_hub_ctrl: usb_hub_ctrl {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
+		>;
+	};
+};
+
+&mac_sw {
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+};
+
+&i2c0 {
+	usb2512b: usb-hub@2c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_hub_ctrl>;
+		compatible = "microchip,usb2512b";
+		reg = <0x2c>;
+		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
new file mode 100644
index 000000000000..d6ef19311a91
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2021 SanCloud Ltd
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+
+/ {
+	model = "SanCloud BeagleBone Enhanced Lite";
+	compatible = "sancloud,am335x-boneenhanced",
+		     "ti,am335x-bone-black",
+		     "ti,am335x-bone",
+		     "ti,am33xx";
+};
+
+&am33xx_pinmux {
+	bb_spi0_pins: pinmux_bb_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_spi0_pins>;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "micron,spi-authenta";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 275ba339adf4..efbe93135dbe 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -7,6 +7,8 @@
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
 #include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -15,66 +17,6 @@
 };
 
 &am33xx_pinmux {
-	pinctrl-names = "default";
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	usb_hub_ctrl: usb_hub_ctrl {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
-		>;
-	};
-
 	mpu6050_pins: pinmux_mpu6050_pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7)    /* uart0_ctsn.gpio1_8 */
@@ -88,31 +30,10 @@
 	};
 };
 
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-};
-
 &i2c0 {
 	lps331ap: barometer@5c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lps3331ap_pins>;
 		compatible = "st,lps331ap-press";
 		st,drdy-int-pin = <1>;
 		reg = <0x5c>;
@@ -121,17 +42,12 @@
 	};
 
 	mpu6050: accelerometer@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpu6050_pins>;
 		compatible = "invensense,mpu6050";
 		reg = <0x68>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
 		orientation = <0xff 0 0 0 1 0 0 0 0xff>;
 	};
-
-	usb2512b: usb-hub@2c {
-		compatible = "microchip,usb2512b";
-		reg = <0x2c>;
-		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		/* wifi on port 4 */
-	};
 };
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 2bfe60d32783..6b9877560741 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -117,18 +117,6 @@
 	status = "okay";
 };
 
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-
-	ethernetphy0: ethernet-phy@0 {
-		reg = <0>;
-		smsc,disable-energy-detect;
-	};
-};
-
 &epwmss1 {
 	status = "okay";
 
@@ -193,15 +181,31 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
-	slaves = <1>;
-	cpsw_emac0: slave@200 {
-		phy-mode = "mii";
-		phy-handle = <&ethernetphy0>;
+};
+
+&cpsw_port1 {
+	phy-mode = "mii";
+	phy-handle = <&ethernetphy0>;
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index f4684c8eaffe..6516907ed579 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -661,20 +661,24 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "mii";
 	phy-handle = <&ethphy0>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&mac {
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 };
 
-&davinci_mdio {
-	status = "okay";
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 1359bf8715e6..673159d93a6a 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -111,23 +111,22 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
+	status = "okay";
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac = <1>;
 };
 
 /* MMC */
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 859e760df4c8..c9629cb5ccd1 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -853,6 +853,88 @@
 			#size-cells = <1>;
 			ranges = <0x0 0x300000 0x80000>;
 			status = "disabled";
+
+			pruss: pruss@0 {
+				compatible = "ti,am3356-pruss";
+				reg = <0x0 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pruss_mem: memories@0 {
+					reg = <0x0 0x2000>,
+					      <0x2000 0x2000>,
+					      <0x10000 0x3000>;
+					reg-names = "dram0", "dram1",
+						    "shrdram2";
+				};
+
+				pruss_cfg: cfg@26000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x26000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x26000 0x2000>;
+
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						pruss_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&l3_gclk>,        /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
+
+				pruss_mii_rt: mii-rt@32000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x32000 0x58>;
+				};
+
+				pruss_intc: interrupt-controller@20000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x20000 0x2000>;
+					interrupts = <20 21 22 23 24 25 26 27>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4", "host_intr5",
+							  "host_intr6", "host_intr7";
+					interrupt-controller;
+					#interrupt-cells = <3>;
+				};
+
+				pru0: pru@34000 {
+					compatible = "ti,am3356-pru";
+					reg = <0x34000 0x2000>,
+					      <0x22000 0x400>,
+					      <0x22400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am335x-pru0-fw";
+				};
+
+				pru1: pru@38000 {
+					compatible = "ti,am3356-pru";
+					reg = <0x38000 0x2000>,
+					      <0x24000 0x400>,
+					      <0x24400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am335x-pru1-fw";
+				};
+
+				pruss_mdio: mdio@32400 {
+					compatible = "ti,davinci_mdio";
+					reg = <0x32400 0x90>;
+					clocks = <&dpll_core_m4_ck>;
+					clock-names = "fck";
+					bus_freq = <1000000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 5e33d0e88f5b..f6ec85d58dd1 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -36,8 +36,8 @@
 		usb1 = &usb1;
 		phy0 = &usb0_phy;
 		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
 		spi0 = &spi0;
 		spi1 = &spi1;
 		mmc0 = &mmc1;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 57a85a6c34a2..61a1d88f9df6 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -434,6 +434,171 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x54400000 0x80000>;
+
+			pruss1: pruss@0 {
+				compatible = "ti,am4376-pruss1";
+				reg = <0x0 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pruss1_mem: memories@0 {
+					reg = <0x0 0x2000>,
+					      <0x2000 0x2000>,
+					      <0x10000 0x8000>;
+					reg-names = "dram0", "dram1",
+						    "shrdram2";
+				};
+
+				pruss1_cfg: cfg@26000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x26000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x26000 0x2000>;
+
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						pruss1_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&sysclk_div>,     /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
+
+				pruss1_mii_rt: mii-rt@32000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x32000 0x58>;
+				};
+
+				pruss1_intc: interrupt-controller@20000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x20000 0x2000>;
+					interrupt-controller;
+					#interrupt-cells = <3>;
+					interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4",
+							  "host_intr6", "host_intr7";
+					ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+				};
+
+				pru1_0: pru@34000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x34000 0x3000>,
+					      <0x22000 0x400>,
+					      <0x22400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru1_0-fw";
+				};
+
+				pru1_1: pru@38000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x38000 0x3000>,
+					      <0x24000 0x400>,
+					      <0x24400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru1_1-fw";
+				};
+
+				pruss1_mdio: mdio@32400 {
+					compatible = "ti,davinci_mdio";
+					reg = <0x32400 0x90>;
+					clocks = <&dpll_core_m4_ck>;
+					clock-names = "fck";
+					bus_freq = <1000000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pruss0: pruss@40000 {
+				compatible = "ti,am4376-pruss0";
+				reg = <0x40000 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pruss0_mem: memories@40000 {
+					reg = <0x40000 0x1000>,
+					      <0x42000 0x1000>;
+					reg-names = "dram0", "dram1";
+				};
+
+				pruss0_cfg: cfg@66000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x66000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x66000 0x2000>;
+
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						pruss0_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&sysclk_div>,     /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
+
+				pruss0_mii_rt: mii-rt@72000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x72000 0x58>;
+					status = "disabled";
+				};
+
+				pruss0_intc: interrupt-controller@60000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x60000 0x2000>;
+					interrupt-controller;
+					#interrupt-cells = <3>;
+					interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4",
+							  "host_intr6", "host_intr7";
+					ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+				};
+
+				pru0_0: pru@74000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x74000 0x1000>,
+					      <0x62000 0x400>,
+					      <0x62400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru0_0-fw";
+				};
+
+				pru0_1: pru@78000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x78000 0x1000>,
+					      <0x64000 0x400>,
+					      <0x64400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru0_1-fw";
+				};
+			};
 		};
 
 		target-module@50000000 {
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index a83f46ed0c9a..5ce8e684e7d3 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -416,3 +416,7 @@
 			   <600000 1100000>,
 			   <300000 950000>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index e2677682b540..c2e4896076e7 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -1118,3 +1118,7 @@
 &cpu {
 	cpu0-supply = <&dcdc2>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 2dc525512266..53f64e3ce735 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -537,3 +537,7 @@
 		opp-suspend;
 	};
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 496ed34f7755..20a34d2d85df 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -892,3 +892,7 @@
 		};
 	};
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 2aa75abf85a9..2f4d2e4e9b3e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -1018,3 +1018,7 @@
 &cpu {
 	cpu0-supply = <&dcdc2>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi
index 032c1acfcda3..46c5383f0eee 100644
--- a/arch/arm/boot/dts/am57-pruss.dtsi
+++ b/arch/arm/boot/dts/am57-pruss.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Common PRUSS data for TI AM57xx platforms
  */
@@ -25,6 +25,94 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x4b200000 0x80000>;
+
+		pruss1: pruss@0 {
+			compatible = "ti,am5728-pruss";
+			reg = <0x0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pruss1_mem: memories@0 {
+				reg = <0x0 0x2000>,
+				      <0x2000 0x2000>,
+				      <0x10000 0x8000>;
+				reg-names = "dram0", "dram1",
+					    "shrdram2";
+			};
+
+			pruss1_cfg: cfg@26000 {
+				compatible = "ti,pruss-cfg", "syscon";
+				reg = <0x26000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x26000 0x2000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pruss1_iepclk_mux: iepclk-mux@30 {
+						reg = <0x30>;
+						#clock-cells = <0>;
+						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
+							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
+					};
+				};
+			};
+
+			pruss1_mii_rt: mii-rt@32000 {
+				compatible = "ti,pruss-mii", "syscon";
+				reg = <0x32000 0x58>;
+			};
+
+			pruss1_intc: interrupt-controller@20000 {
+				compatible = "ti,pruss-intc";
+				reg = <0x20000 0x2000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "host_intr0", "host_intr1",
+						  "host_intr2", "host_intr3",
+						  "host_intr4", "host_intr5",
+						  "host_intr6", "host_intr7";
+			};
+
+			pru1_0: pru@34000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x34000 0x3000>,
+				      <0x22000 0x400>,
+				      <0x22400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru1_0-fw";
+			};
+
+			pru1_1: pru@38000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x38000 0x3000>,
+				      <0x24000 0x400>,
+				      <0x24400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru1_1-fw";
+			};
+
+			pruss1_mdio: mdio@32400 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&dpll_gmac_h13x2_ck>;
+				clock-names = "fck";
+				bus_freq = <1000000>;
+				reg = <0x32400 0x90>;
+			};
+		};
 	};
 
 	pruss2_tm: target-module@4b2a6000 {
@@ -46,5 +134,93 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x4b280000 0x80000>;
+
+		pruss2: pruss@0 {
+			compatible = "ti,am5728-pruss";
+			reg = <0x0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pruss2_mem: memories@0 {
+				reg = <0x0 0x2000>,
+				      <0x2000 0x2000>,
+				      <0x10000 0x8000>;
+				reg-names = "dram0", "dram1",
+					    "shrdram2";
+			};
+
+			pruss2_cfg: cfg@26000 {
+				compatible = "ti,pruss-cfg", "syscon";
+				reg = <0x26000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x26000 0x2000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pruss2_iepclk_mux: iepclk-mux@30 {
+						reg = <0x30>;
+						#clock-cells = <0>;
+						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
+							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
+					};
+				};
+			};
+
+			pruss2_mii_rt: mii-rt@32000 {
+				compatible = "ti,pruss-mii", "syscon";
+				reg = <0x32000 0x58>;
+			};
+
+			pruss2_intc: interrupt-controller@20000 {
+				compatible = "ti,pruss-intc";
+				reg = <0x20000 0x2000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "host_intr0", "host_intr1",
+						  "host_intr2", "host_intr3",
+						  "host_intr4", "host_intr5",
+						  "host_intr6", "host_intr7";
+			};
+
+			pru2_0: pru@34000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x34000 0x3000>,
+				      <0x22000 0x400>,
+				      <0x22400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru2_0-fw";
+			};
+
+			pru2_1: pru@38000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x38000 0x3000>,
+				      <0x24000 0x400>,
+				      <0x24400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru2_1-fw";
+			};
+
+			pruss2_mdio: mdio@32400 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&dpll_gmac_h13x2_ck>;
+				clock-names = "fck";
+				bus_freq = <1000000>;
+				reg = <0x32400 0x90>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index e81078c2d00d..48425020281a 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -208,3 +208,11 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 6504265f3f7e..94a738cb0a4d 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -27,3 +27,11 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
index 2cb577432766..c260aa1a85bd 100644
--- a/arch/arm/boot/dts/am5748.dtsi
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -3,7 +3,7 @@
  * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
-#include "dra76x.dtsi"
+#include "dra74x-p.dtsi"
 #include "am57-pruss.dtsi"
 
 / {
@@ -25,10 +25,6 @@
 	status = "disabled";
 };
 
-&usb4_tm {
-	status = "disabled";
-};
-
 &atl_tm {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 1b8f3a28af05..6dff3660bf09 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -36,10 +36,14 @@
 	pinctrl-2 = <&mmc2_pins_default>;
 };
 
-&m_can0 {
+&emif1 {
+	status = "okay";
+};
+
+&pruss1_mdio {
 	status = "disabled";
 };
 
-&emif1 {
-	status = "okay";
+&pruss2_mdio {
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 6b82ecf803c5..994e69ab38d7 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -637,3 +637,11 @@
 	status = "okay";
 	memory-region = <&dsp2_memory_region>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index aed81568a297..2e94f32d9dfc 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -618,3 +618,11 @@
 	status = "okay";
 	ti,no-reset-on-init;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 583a241f1151..1d24b394ea4c 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -129,3 +129,7 @@
      status = "okay";
      memory-region = <&gfx_memory>;
 };
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
new file mode 100644
index 000000000000..9c6271a17ae8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Cloudripper BMC";
+	compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (1-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (3-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * PDB (Power Delivery Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (15-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+	};
+
+	spi_gpio: spi-gpio {
+		num-chipselects = <2>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+
+		eeprom@1 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <1>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/*
+ * "mdio1" is connected to the MDC/MDIO interface of the on-board
+ * management switch (whose ports are connected to BMC, Host and front
+ * panel ethernet port).
+ */
+&mdio1 {
+	status = "okay";
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	/*
+	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	/*
+	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	lp5012@14 {
+		compatible = "ti,lp5012";
+		reg = <0x14>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "sys";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "fan";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "psu";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "scm";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
+	 * Delivery Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c15 {
+	/*
+	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
+	 * Controller Module).
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux48: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux49: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux50: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux51: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux52: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux53: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux54: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux55: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
new file mode 100644
index 000000000000..27b43fe099f1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Elbert BMC";
+	compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+
+		/*
+		 * 8 child channels of PCA9548 2-0075.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * 8 child channels of PCA9548 5-0075.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	spi_gpio: spi-gpio {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..af58a73bbc49
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,1251 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi-gpio {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
index dcf213472749..60e875ac2461 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
@@ -51,7 +51,3 @@
 &vhub {
 	status = "okay";
 };
-
-&adc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
index 9eb23e874f19..230d16cd9967 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
@@ -265,19 +265,19 @@
 		};
 
 		/*
-		 * FIT image: 59.5 MB.
+		 * FIT image: 55.5 MB.
 		 */
 		fit@80000 {
-			reg = <0x80000 0x3b80000>;
+			reg = <0x80000 0x3780000>;
 			label = "fit";
 		};
 
 		/*
-		 * "data0" partition (4MB) is reserved for persistent
+		 * "data0" partition (8MB) is reserved for persistent
 		 * data store.
 		 */
 		data0@3800000 {
-			reg = <0x3c00000 0x400000>;
+			reg = <0x3800000 0x800000>;
 			label = "data0";
 		};
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
index 39c6be91d53f..584efa528450 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
@@ -12,6 +12,11 @@
 		stdout-path = &uart3;
 		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
 	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
 };
 
 &wdt2 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
index 2dcfeae3c92a..6624855d8ebd 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@@ -23,10 +23,6 @@
 	status = "disabled";
 };
 
-&adc {
-	status = "okay";
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
index 63a3dd548f30..a901c8be49b9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
@@ -91,53 +91,7 @@
  * Both firmware flashes are 128MB on Wedge400 BMC.
  */
 &fmc_flash0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		 * u-boot partition: 384KB.
-		 */
-		u-boot@0 {
-			reg = <0x0 0x60000>;
-			label = "u-boot";
-		};
-
-		/*
-		 * u-boot environment variables: 128KB.
-		 */
-		u-boot-env@60000 {
-			reg = <0x60000 0x20000>;
-			label = "env";
-		};
-
-		/*
-		 * FIT image: 123.5 MB.
-		 */
-		fit@80000 {
-			reg = <0x80000 0x7b80000>;
-			label = "fit";
-		};
-
-		/*
-		 * "data0" partition (4MB) is reserved for persistent
-		 * data store.
-		 */
-		data0@7c00000 {
-			reg = <0x7c00000 0x400000>;
-			label = "data0";
-		};
-
-		/*
-		 * "flash0" partition (covering the entire flash) is
-		 * explicitly created to avoid breaking legacy applications.
-		 */
-		flash0@0 {
-			reg = <0x0 0x8000000>;
-			label = "flash0";
-		};
-	};
+#include "facebook-bmc-flash-layout-128.dtsi"
 };
 
 &fmc_flash1 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index aa24cac8e5be..2efd70666738 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -253,7 +253,7 @@
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
 	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","I2C_FLASH_MICRO_N","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
 	/*S0-S7*/	"","","","","","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
@@ -303,7 +303,7 @@
 			type = <PCA955X_TYPE_GPIO>;
 		};
 
-		gpio@01 {
+		gpio@1 {
 			reg = <1>;
 			type = <PCA955X_TYPE_GPIO>;
 		};
@@ -2832,7 +2832,7 @@
 
 &emmc {
 	status = "okay";
-	clk-phase-mmc-hs200 = <180>, <180>;
+	clk-phase-mmc-hs200 = <210>, <228>;
 };
 
 &fsim0 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 481d0ee1f85f..6419c9762c0b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -271,7 +271,7 @@
 	/*O0-O7*/	"","","","usb-power","","","","",
 	/*P0-P7*/	"","","","","pcieslot-power","","","",
 	/*Q0-Q7*/	"cfam-reset","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
 	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
 				"","","","",
 	/*T0-T7*/	"","","","","","","","",
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 000000000000..b3c1e3ba5831
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "NF5280M6 BMC";
+	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		<&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+	status = "okay";
+	/* Enable GPIOE0 and GPIOE2 pass-through by default */
+	pinctrl-names = "pass-through";
+	pinctrl-0 = <&pinctrl_gpie0_default
+			&pinctrl_gpie2_default>;
+	gpio-line-names =
+	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+				"FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+				"FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+				"BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+				"FM_BOARD_ID4","FM_BOARD_ID5","","",
+	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+				"BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+				"RST_GLB_RST_WARN_N",
+	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+				"BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+				"FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+				"FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+				"VGA_HSYNC","VGA_VSYNC","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+				"DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+				"RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+				"GPIOS5_BMC","","GPIOS7_BMC",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+				"GPIOZ5","","",
+	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+				"FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	/* FP_LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+
+	pca9548@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+	};
+
+	pca9548@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+	};
+};
+
+&i2c4 {
+	/* IPMB */
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@33 {
+		compatible = "adi,adm1293";
+		reg = <0x33>;
+	};
+
+	adm1278@32 {
+		compatible = "adi,adm1293";
+		reg = <0x32>;
+	};
+
+	adm1278@20 {
+		compatible = "adi,adm1293";
+		reg = <0x20>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index e33153dcaea8..e39f310d55eb 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -126,7 +126,7 @@
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
-	/*P0-P7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","bmc-tpm-reset","","",
 	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
 	/*R0-R7*/	"","","","","","","","",
 	/*S0-S7*/	"","","","","","","","",
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 329eaeef66fb..73ca1ec6fc24 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -352,7 +352,6 @@
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
 				interrupt-controller;
-				ngpios = <8>;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_sgpm_default>;
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 7e90d713f5e5..6dde51c2aed3 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -208,12 +208,12 @@
 	};
 
 	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "HVI3C3";
+		function = "I3C3";
 		groups = "HVI3C3";
 	};
 
 	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "HVI3C4";
+		function = "I3C4";
 		groups = "HVI3C4";
 	};
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index f96607b7b4e2..1b47be1704f8 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -377,6 +377,34 @@
 				#interrupt-cells = <2>;
 			};
 
+			sgpiom0: sgpiom@1e780500 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780500 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm1_default>;
+				status = "disabled";
+			};
+
+			sgpiom1: sgpiom@1e780600 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780600 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm2_default>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@1e780800 {
 				#gpio-cells = <2>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
index 73a5503be78c..4e5e786e18b7 100644
--- a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
@@ -115,3 +115,7 @@
 &vhub {
 	status = "okay";
 };
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..051de5bec345
--- /dev/null
+++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		spi1 = &spi1;
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi-gpio {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x8000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index c4b3750495da..abe27adfa4d6 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -336,7 +336,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index edca66c232c1..b1068cca4228 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -92,6 +92,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
 		red {
@@ -537,6 +539,10 @@
 				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
 				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
 		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
 	};
 
 	sdmmc1 {
@@ -569,6 +575,14 @@
 				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 		};
 	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
 }; /* pinctrl */
 
 &pwm0 {
@@ -580,7 +594,7 @@
 &sdmmc0 {
 	bus-width = <4>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
 	status = "okay";
 	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 	disable-wp;
@@ -648,7 +662,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index e3251f3e3eaa..b48ac3b62a31 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -47,32 +47,32 @@
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
 
-					at91bootstrap@00000000 {
+					at91bootstrap@0 {
 						label = "at91bootstrap";
 						reg = <0x00000000 0x00040000>;
 					};
 
-					bootloader@00040000 {
+					bootloader@40000 {
 						label = "bootloader";
 						reg = <0x00040000 0x000c0000>;
 					};
 
-					bootloaderenvred@00100000 {
+					bootloaderenvred@100000 {
 						label = "bootloader env redundant";
 						reg = <0x00100000 0x00040000>;
 					};
 
-					bootloaderenv@00140000 {
+					bootloaderenv@140000 {
 						label = "bootloader env";
 						reg = <0x00140000 0x00040000>;
 					};
 
-					dtb@00180000 {
+					dtb@180000 {
 						label = "device tree";
 						reg = <0x00180000 0x00080000>;
 					};
 
-					kernel@00200000 {
+					kernel@200000 {
 						label = "kernel";
 						reg = <0x00200000 0x00600000>;
 					};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index a9e6fee55a2a..614999dcb990 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -138,7 +138,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
@@ -224,8 +224,10 @@
 			adc: adc@fc030000 {
 				vddana-supply = <&vddana>;
 				vref-supply = <&advref>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
 
-				status = "disabled";
+				status = "okay";
 			};
 
 			pinctrl@fc038000 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index ff83967fd008..c145c4e5ef58 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -205,7 +205,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index bd64721fa23c..e06b58724ca8 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -184,6 +184,8 @@
 		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx4_default>;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
 		mcp16502@5b {
@@ -307,6 +309,8 @@
 &i2c0 { /* mikrobus i2c */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
 	status = "okay";
 };
 
@@ -314,6 +318,8 @@
 	dmas = <0>, <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
 	status = "okay";
 
 	eeprom@50 {
@@ -693,7 +699,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index dfd150eb0fd8..8ed58af01391 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -93,12 +93,12 @@
 							reg = <0x40000 0xc0000>;
 						};
 
-						bootloaderenvred@0x100000 {
+						bootloaderenvred@100000 {
 							label = "bootloader env redundant";
 							reg = <0x100000 0x40000>;
 						};
 
-						bootloaderenv@0x140000 {
+						bootloaderenv@140000 {
 							label = "bootloader env";
 							reg = <0x140000 0x40000>;
 						};
@@ -203,7 +203,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 
 				input@0 {
 					reg = <0>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 509c732a0d8b..b1e854f658de 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -95,37 +95,37 @@
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
 
-					at91bootstrap@00000000 {
+					at91bootstrap@0 {
 						label = "at91bootstrap";
 						reg = <0x00000000 0x00040000>;
 					};
 
-					bootloader@00040000 {
+					bootloader@40000 {
 						label = "bootloader";
 						reg = <0x00040000 0x000c0000>;
 					};
 
-					bootloaderenvred@00100000 {
+					bootloaderenvred@100000 {
 						label = "bootloader env redundant";
 						reg = <0x00100000 0x00040000>;
 					};
 
-					bootloaderenv@00140000 {
+					bootloaderenv@140000 {
 						label = "bootloader env";
 						reg = <0x00140000 0x00040000>;
 					};
 
-					dtb@00180000 {
+					dtb@180000 {
 						label = "device tree";
 						reg = <0x00180000 0x00080000>;
 					};
 
-					kernel@00200000 {
+					kernel@200000 {
 						label = "kernel";
 						reg = <0x00200000 0x00600000>;
 					};
 
-					misc@00800000 {
+					misc@800000 {
 						label = "misc";
 						reg = <0x00800000 0x00000000>;
 					};
@@ -347,7 +347,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 9c55a921263b..d72c042f2850 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -57,6 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -169,6 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
@@ -248,6 +252,26 @@
 							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
 							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -339,6 +363,8 @@
 
 	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
@@ -362,6 +388,9 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
 
 		d2 {
 			label = "d2";
@@ -370,7 +399,7 @@
 		};
 
 		d3 {
-			label = "d3";
+			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 0b3ad1b580b8..d241c24f0d83 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d4.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D4 Xplained";
@@ -38,16 +39,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
 			i2c0: i2c@f8014000 {
 				i2c-digital-filter;
 				status = "okay";
@@ -90,6 +81,8 @@
 			};
 
 			spi1: spi@fc018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -147,6 +140,19 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -245,13 +251,15 @@
 		pb_user1 {
 			label = "pb_user1";
 			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
 		d8 {
@@ -278,6 +286,8 @@
 
 	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
new file mode 100644
index 000000000000..4cbed98cc2f4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
+ *
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAMA7G5-EK";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
+
+	chosen {
+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		serial3 = &uart0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c8;
+		i2c2 = &i2c9;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		bp1 {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm. */
+
+		red_led {
+			label = "red";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led {
+			label = "blue";
+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* 512 M */
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sama7g5ek audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				sound-dai = <&spdiftx>;
+			};
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				sound-dai = <&spdifrx>;
+			};
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart0: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		status = "disabled";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart4: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&flx8 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c8: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx9 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c9: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx11 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi11: spi@400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&pioA {
+	pinctrl_flx0_default: flx0_default {
+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+			 <PIN_PE4__FLEXCOM0_IO1>,
+			 <PIN_PE6__FLEXCOM0_IO3>,
+			 <PIN_PE7__FLEXCOM0_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_flx3_default: flx3_default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+			 <PIN_PD19__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx7_default: flx7_default {
+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+			 <PIN_PC24__FLEXCOM7_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0_default {
+		pinmux = <PIN_PA16__G0_TX0>,
+			 <PIN_PA17__G0_TX1>,
+			 <PIN_PA26__G0_TX2>,
+			 <PIN_PA27__G0_TX3>,
+			 <PIN_PA19__G0_RX0>,
+			 <PIN_PA20__G0_RX1>,
+			 <PIN_PA28__G0_RX2>,
+			 <PIN_PA29__G0_RX3>,
+			 <PIN_PA15__G0_TXEN>,
+			 <PIN_PA30__G0_RXCK>,
+			 <PIN_PA18__G0_RXDV>,
+			 <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>,
+			 <PIN_PA25__G0_125CK>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0_txck_default {
+		pinmux = <PIN_PA24__G0_TXCK>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+		pinmux = <PIN_PA31__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_default: gmac1_default {
+		pinmux = <PIN_PD30__G1_TXCK>,
+			 <PIN_PD22__G1_TX0>,
+			 <PIN_PD23__G1_TX1>,
+			 <PIN_PD21__G1_TXEN>,
+			 <PIN_PD25__G1_RX0>,
+			 <PIN_PD26__G1_RX1>,
+			 <PIN_PD27__G1_RXER>,
+			 <PIN_PD24__G1_RXDV>,
+			 <PIN_PD28__G1_MDC>,
+			 <PIN_PD29__G1_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+		pinmux = <PIN_PA21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+			 <PIN_PC13__FLEXCOM8_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+			 <PIN_PC19__FLEXCOM9_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2s0_default: i2s0_default {
+		pinmux = <PIN_PB23__I2SMCC0_CK>,
+			 <PIN_PB24__I2SMCC0_WS>,
+			 <PIN_PB25__I2SMCC0_DOUT1>,
+			 <PIN_PB26__I2SMCC0_DOUT0>,
+			 <PIN_PB27__I2SMCC0_MCK>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA13__GPIO>,
+			 <PIN_PB8__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+		pinmux = <PIN_PD1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+		pinmux = <PIN_PA13__PWMH2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+		pinmux = <PIN_PD20__PWMH3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+			 <PIN_PB4__FLEXCOM11_IO1>,
+			 <PIN_PB5__FLEXCOM11_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA3__SDMMC0_DAT0>,
+				 <PIN_PA4__SDMMC0_DAT1>,
+				 <PIN_PA5__SDMMC0_DAT2>,
+				 <PIN_PA6__SDMMC0_DAT3>,
+				 <PIN_PA7__SDMMC0_DAT4>,
+				 <PIN_PA8__SDMMC0_DAT5>,
+				 <PIN_PA9__SDMMC0_DAT6>,
+				 <PIN_PA10__SDMMC0_DAT7>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA2__SDMMC0_RSTN>,
+				 <PIN_PA11__SDMMC0_DS>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PB29__SDMMC1_CMD>,
+				 <PIN_PB31__SDMMC1_DAT0>,
+				 <PIN_PC0__SDMMC1_DAT1>,
+				 <PIN_PC1__SDMMC1_DAT2>,
+				 <PIN_PC2__SDMMC1_DAT3>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PB30__SDMMC1_CK>,
+				 <PIN_PB28__SDMMC1_RSTN>,
+				 <PIN_PC5__SDMMC1_1V8SEL>,
+				 <PIN_PC4__SDMMC1_CD>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc2_default: sdmmc2_default {
+		cmd_data {
+			pinmux = <PIN_PD3__SDMMC2_CMD>,
+				 <PIN_PD5__SDMMC2_DAT0>,
+				 <PIN_PD6__SDMMC2_DAT1>,
+				 <PIN_PD7__SDMMC2_DAT2>,
+				 <PIN_PD8__SDMMC2_DAT3>;
+			bias-pull-up;
+		};
+
+		ck {
+			pinmux = <PIN_PD4__SDMMC2_CK>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spdifrx_default: spdifrx_default {
+		pinmux = <PIN_PB0__SPDIF_RX>;
+		bias-disable;
+	};
+
+	pinctrl_spdiftx_default: spdiftx_default {
+		pinmux = <PIN_PB1__SPDIF_TX>;
+		bias-disable;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&spdifrx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdifrx_default>;
+	status = "okay";
+};
+
+&spdiftx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdiftx_default>;
+	status = "okay";
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 91d1018ab75f..8ef48c00f98d 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -80,19 +80,19 @@
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0xf880000>;
 		};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index cf05d532db65..5126e2d72ed7 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -154,19 +154,19 @@
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0xf880000>;
 		};
diff --git a/arch/arm/boot/dts/dra74x-p.dtsi b/arch/arm/boot/dts/dra74x-p.dtsi
new file mode 100644
index 000000000000..006189dad7a7
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x-p.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+	compatible = "ti,dra762", "ti,dra7";
+
+	ocp {
+		emif1: emif@4c000000 {
+			compatible = "ti,emif-dra7xx";
+			reg = <0x4c000000 0x200>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+	ti,irqs-skip = <10 67 68 133 139 140>;
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index a09e7bd77fc7..bc4ae91cba16 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -9,13 +9,6 @@
 	compatible = "ti,dra762", "ti,dra7";
 
 	ocp {
-		emif1: emif@4c000000 {
-			compatible = "ti,emif-dra7xx";
-			reg = <0x4c000000 0x200>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
 		target-module@42c01900 {
 			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
 			ranges = <0x0 0x42c00000 0x2000>;
@@ -90,11 +83,6 @@
 	};
 };
 
-/* MCAN interrupts are hard-wired to irqs 67, 68 */
-&crossbar_mpu {
-	ti,irqs-skip = <10 67 68 133 139 140>;
-};
-
 &scm_conf_clocks {
 	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 77ab7193b903..a10b789d8acf 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -50,6 +50,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 70baad9b11f0..7e7d65ce6585 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -32,6 +32,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@900 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index a142fe84010b..d3802046c8b8 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -35,6 +35,23 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
 		cpu0: cpu@a00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2ea2caaca4e2..4ffa9253b566 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -50,6 +50,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 973448c4ad93..52fa211525ce 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -34,42 +34,68 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+				core2 {
+					cpu = <&cpu4>;
+				};
+				core3 {
+					cpu = <&cpu5>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			cci-control-port = <&cci_control1>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			cci-control-port = <&cci_control1>;
 		};
 
-		cpu@100 {
+		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@101 {
+		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@102 {
+		cpu4: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@103 {
+		cpu5: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index 58d1c54cf925..e9f4eb75b50f 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -22,6 +22,38 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index 4b641b9b8179..412a0bb4b988 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -21,6 +21,38 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
 		cpu0: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
new file mode 100644
index 000000000000..7f3652dea550
--- /dev/null
+++ b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 119 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x7700000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (8MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@7800000 {
+		reg = <0x7800000 0x800000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts b/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
new file mode 100644
index 000000000000..038bb0025556
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-picoitx.dtsi"
+
+/ {
+	model = "DH electronics i.MX6DL DHCOM on PicoITX";
+	compatible = "dh,imx6dl-dhcom-picoitx", "dh,imx6dl-dhcom-som",
+		     "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
new file mode 100644
index 000000000000..667b8faa1807
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU SoloCore";
+	compatible = "skov,imx6dl-skov-revc-lt2", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
new file mode 100644
index 000000000000..5dcc433fe2af
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU SoloCore";
+	compatible = "skov,imx6dl-skov-revc-lt6", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-solidsense.dts b/arch/arm/boot/dts/imx6dl-solidsense.dts
new file mode 100644
index 000000000000..2a3699adbed0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-solidsense.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+	model = "SolidRun SolidSense Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,solidsense/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index a685b1c3208f..d4d57370615d 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -1,269 +1,25 @@
-// SPDX-License-Identifier: (GPL-2.0+)
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2015-2021 DH electronics GmbH
  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PDK2 PCB number: 516-400 or newer
  */
-
 /dts-v1/;
 
-#include "imx6q-dhcom-som.dtsi"
+#include "imx6q.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
 
 / {
-	model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)";
-	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	clk_ext_audio_codec: clock-codec {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
-	display_bl: display-bl {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
-		default-brightness-level = <8>;
-		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0edh6";
-		ddc-i2c-bus = <&i2c2>;
-		backlight = <&display_bl>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_ext>;
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "disabled";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_ext_audio_codec>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&sw2_reg>;
-	};
-
-	touchscreen@38 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
-
-	pinctrl_hog: hog-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x400120b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x400120b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x400120b0
-			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x400120b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x120b0
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x400120b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x400120b0
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x400120b0
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x400120b0
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x400120b0
-			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x400120b0
-			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16		0x400120b0
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x400120b0
-			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x400120b0
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x400120b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x400120b0
-		>;
-	};
-
-	pinctrl_audmux_ext: audmux-ext-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_enet_1G: enet-1G-grp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x000b0
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x000b1
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x000b1
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27			0x120b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_touchscreen: touchscreen-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1
-		>;
-	};
-
-	pinctrl_pcie: pcie-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
+	model = "DH electronics i.MX6Q DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som",
+		     "fsl,imx6q";
 };
 
 &sata {
 	status = "okay";
 };
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
new file mode 100644
index 000000000000..f00add7b3048
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-revc-lt2", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001f878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001f878
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
new file mode 100644
index 000000000000..3e3b36ad362a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-revc-lt6", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
new file mode 100644
index 000000000000..7f1f19b74bfa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-reve-mi1010ait-1cp1", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		wakeup-source;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			/* external 1 k pull up */
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x40010878
+			/* external 1 k pull up */
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x40010878
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			/* CTP_RST */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-solidsense.dts b/arch/arm/boot/dts/imx6q-solidsense.dts
new file mode 100644
index 000000000000..0e6a325df363
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-solidsense.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+	model = "SolidRun SolidSense Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,solidsense/q", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
new file mode 100644
index 000000000000..3d0a50a9ab21
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. Therefore the micro SD
+ * card must be disabled and the uart1 rts/cts must be output on other DHCOM
+ * pins, see uart1 and usdhc3 node below.
+ */
+&can2 {
+	status = "okay";
+};
+
+&gpio1 {
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX6 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <18 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DRC02-In1", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "DHCOM-E", "DRC02-In2", "DHCOM-H",
+		"DHCOM-I", "DRC02-HW0", "", "", "", "", "", "",
+		"", "", "", "", "DRC02-Out1", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "DRC02-Out2", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "DRC02-HW2", "DRC02-HW1",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	/*
+	 * Due to the use of can2 the signals for can2 Tx and Rx are routed to
+	 * DHCOM UART1 rts/cts pins. Therefore this UART have to use DHCOM GPIOs
+	 * for rts/cts. So configure DHCOM GPIO I as rts and GPIO M as cts.
+	 */
+	/delete-property/ uart-has-rtscts;
+	cts-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; /* GPIO M */
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&uart5 {
+	/*
+	 * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
+	 * controlled by DHCOM GPIO P. So remove rts/cts pins and the property
+	 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
+	 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
+	 * node above.
+	 */
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-0 = <&pinctrl_uart5_core &pinctrl_dhcom_p &pinctrl_dhcom_q>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
+
+&usdhc2 { /* SD card */
+	status = "okay";
+};
+
+&usdhc3 {
+	/*
+	 * Due to the use of can2 the micro SD card on module have to be
+	 * disabled, because the pins SD3_DAT0 and SD3_DAT1 are muxed as
+	 * can2 Tx and Rx.
+	 */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * I: uart1 rts
+			 * M: uart1 cts
+			 * P: uart5 rs485-tx-en
+			 * Q: uart5 rs485-rx-en
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_uart5_core: uart5-core-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
new file mode 100644
index 000000000000..dc21853706a5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		compatible = "fixed-clock";
+	};
+
+	display_bl: display-bl {
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		compatible = "pwm-backlight";
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		#size-cells = <0>;
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		/*
+		 * Disable led-5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-7 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			pinctrl-0 = <&pinctrl_dhcom_h>;
+			pinctrl-names = "default";
+		};
+
+		led-8 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	panel {
+		backlight = <&display_bl>;
+		compatible = "edt,etm0700g0edh6";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-sgtl5000";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	pinctrl-0 = <&pinctrl_audmux_ext>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+/* 1G ethernet */
+/delete-node/ &ethphy0;
+&fec {
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy7>;
+	pinctrl-0 = <&pinctrl_enet_1G>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy7: ethernet-phy@7 { /* KSZ 9021 */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy7>;
+			pinctrl-names = "default";
+			reg = <7>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&sw2_reg>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		pinctrl-0 = <&pinctrl_dhcom_e>;
+		pinctrl-names = "default";
+		reg = <0x38>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>;
+	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usdhc2 { /* SD card */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * A: key TA1
+			 * B: key TA2
+			 * C: key TA3
+			 * D: key TA4
+			 * E: touchscreen
+			 * F: led6
+			 * G: backlight enable
+			 * H: led7
+			 * I: led8
+			 * J: PCIe reset
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_audmux_ext: audmux-ext-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+		>;
+	};
+
+	pinctrl_enet_1G: enet-1G-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+		>;
+	};
+
+	pinctrl_ethphy7: ethphy7-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0xb1 /* WOL */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0xb0 /* Reset */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
new file mode 100644
index 000000000000..4cd4cb9543c8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "DHCOM-A", "", "DHCOM-B", "PicoITX-In2", "", "",
+		"", "", "", "", "", "", "", "",
+		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "PicoITX-In1", "DHCOM-INT", "DHCOM-H",
+		"DHCOM-I", "PicoITX-HW2", "", "", "", "", "", "",
+		"", "", "", "", "PicoITX-Out1", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "PicoITX-Out2", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "PicoITX-HW0", "PicoITX-HW1",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * I: yellow led
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
index 4bf51f3ce003..5d10c40313cb 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
@@ -1,10 +1,9 @@
-// SPDX-License-Identifier: (GPL-2.0+)
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2015-2021 DH electronics GmbH
  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
  */
 
-#include "imx6q.dtsi"
 #include <dt-bindings/pwm/pwm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/imx6qdl-clock.h>
@@ -28,14 +27,22 @@
 		serial4 = &uart3;
 	};
 
-	memory@10000000 {
+	memory@10000000 { /* Appropriate memory size will be filled by U-Boot */
 		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator-3P3V {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3V";
 	};
 
 	reg_eth_vio: regulator-eth-vio {
 		compatible = "regulator-fixed";
-		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio1 7 0>;
 		pinctrl-0 = <&pinctrl_enet_vio>;
 		pinctrl-names = "default";
 		regulator-always-on;
@@ -46,225 +53,521 @@
 		vin-supply = <&sw2_reg>;
 	};
 
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+	/* OE pin of the latch is low active */
+	reg_latch_oe_on: regulator-latch-oe-on {
 		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		regulator-always-on;
+		regulator-name = "latch_oe_on";
 	};
 
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
 		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
+		enable-active-high;
+		gpio = <&gpio3 31 0>;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		regulator-name = "usb_h1_vbus";
 	};
 
-	reg_3p3v: regulator-3P3V {
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
 	};
 };
 
 &can1 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
 };
 
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. So to enable can2 on
+ * the board device tree file, the micro SD card must be disabled and the uart1
+ * rts/cts must be disabled or output on other DHCOM pins.
+ */
 &can2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	status = "disabled";
 };
 
 &ecspi1 {
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
 	status = "okay";
 
-	flash@0 {	/* S25FL116K */
+	flash@0 { /* S25FL116K */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
 		m25p,fast-read;
+		reg = <0>;
+		spi-max-frequency = <50000000>;
 	};
 };
 
 &ecspi2 {
 	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
+	pinctrl-names = "default";
+	status = "disabled";
 };
 
 &fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_100M>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy0>;
+	pinctrl-0 = <&pinctrl_enet_100M>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy0: ethernet-phy@0 {	/* SMSC LAN8710Ai */
+		ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
 			reg = <0>;
-			max-speed = <100>;
-			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			smsc,disable-energy-detect; /* Make plugin detection reliable */
 		};
 	};
 };
 
+&gpio1 {
+	gpio-line-names =
+		"", "", "DHCOM-A", "", "DHCOM-B", "DHCOM-C", "", "",
+		"", "", "", "", "", "", "", "",
+		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"SOM-HW2", "", "", "SOM-HW0", "", "SOM-MEM1", "SOM-MEM0", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DHCOM-G", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "DHCOM-E", "DHCOM-INT", "DHCOM-H",
+		"DHCOM-I", "DHCOM-L", "", "", "", "", "", "",
+		"", "", "", "", "DHCOM-F", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "DHCOM-V", "DHCOM-W", "", "DHCOM-O", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "DHCOM-D", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "DHCOM-J", "DHCOM-K",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"DHCOM-M", "DHCOM-N", "", "", "", "", "", "",
+		"", "", "", "", "", "DHCOM-P", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
+	/*
+	 * Info: According to erratum ERR007805 clock frequency limit is 375000.
+	 * The erratum for i.MX6S/DL is here [1] and for i.MX6Q/D is here [2].
+	 * [1] https://www.nxp.com/docs/en/errata/IMX6SDLCE.pdf
+	 * [2] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
 	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
 	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c2 {
+	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
 	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
 	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c3 {
+	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
 	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	pinctrl-names = "default", "gpio";
 	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	ltc3676: pmic@3c {
 		compatible = "lltc,ltc3676";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic_hw300>;
-		reg = <0x3c>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		reg = <0x3c>;
 
 		regulators {
 			sw1_reg: sw1 {
-				regulator-min-microvolt = <787500>;
-				regulator-max-microvolt = <1527272>;
 				lltc,fb-voltage-divider = <100000 110000>;
-				regulator-suspend-mem-microvolt = <1040000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1527272>;
+				regulator-min-microvolt = <787500>;
+				regulator-ramp-delay = <7000>;
+				regulator-suspend-mem-microvolt = <1040000>;
 			};
 
 			sw2_reg: sw2 {
-				regulator-min-microvolt = <1885714>;
-				regulator-max-microvolt = <3657142>;
 				lltc,fb-voltage-divider = <100000 28000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3657142>;
+				regulator-min-microvolt = <1885714>;
+				regulator-ramp-delay = <7000>;
 			};
 
 			sw3_reg: sw3 {
-				regulator-min-microvolt = <787500>;
-				regulator-max-microvolt = <1527272>;
 				lltc,fb-voltage-divider = <100000 110000>;
-				regulator-suspend-mem-microvolt = <980000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1527272>;
+				regulator-min-microvolt = <787500>;
+				regulator-ramp-delay = <7000>;
+				regulator-suspend-mem-microvolt = <980000>;
 			};
 
 			sw4_reg: sw4 {
-				regulator-min-microvolt = <855571>;
-				regulator-max-microvolt = <1659291>;
 				lltc,fb-voltage-divider = <100000 93100>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1659291>;
+				regulator-min-microvolt = <855571>;
+				regulator-ramp-delay = <7000>;
 			};
 
 			ldo1_reg: ldo1 {
-				regulator-min-microvolt = <3240306>;
-				regulator-max-microvolt = <3240306>;
 				lltc,fb-voltage-divider = <102000 29400>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3240306>;
+				regulator-min-microvolt = <3240306>;
 			};
 
 			ldo2_reg: ldo2 {
-				regulator-min-microvolt = <2484708>;
-				regulator-max-microvolt = <2484708>;
 				lltc,fb-voltage-divider = <100000 41200>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2484708>;
+				regulator-min-microvolt = <2484708>;
 			};
 		};
 	};
 
-	touchscreen@49 {	/* TSC2004 */
+	touchscreen@49 { /* TSC2004 */
 		compatible = "ti,tsc2004";
+		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_tsc2004>;
+		pinctrl-names = "default";
 		reg = <0x49>;
 		vio-supply = <&reg_3p3v>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2004_hw300>;
-		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
 		status = "disabled";
 	};
 
 	eeprom@50 {
 		compatible = "atmel,24c02";
-		reg = <0x50>;
 		pagesize = <16>;
+		reg = <0x50>;
 	};
 
 	rtc_i2c: rtc@56 {
 		compatible = "microcrystal,rv3029";
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_rtc>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc_hw300>;
 		reg = <0x56>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
 	};
 };
 
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&reg_arm {
+	vin-supply = <&sw3_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&uart1 { /* DHCOM UART1 */
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 { /* DHCOM UART3 */
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart5 { /* DHCOM UART2 */
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	pinctrl-names = "default";
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	dr_mode = "otg";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	pinctrl-names = "default";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 { /* External SD card via DHCOM */
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&usdhc3 { /* Micro SD card on module */
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usdhc4 { /* eMMC on module */
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&weim {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	fsl,weim-cs-gpr = <&gpr>;
+	pinctrl-0 = <&pinctrl_weim &pinctrl_weim_cs0 &pinctrl_weim_cs1>;
+	pinctrl-names = "default";
+	/* It is necessary to setup 2x 64MB otherwise setting gpr fails */
+	ranges = <0 0 0x08000000 0x04000000>, /* CS0 */
+		 <1 0 0x0c000000 0x04000000>; /* CS1 */
+	status = "disabled";
+};
+
 &iomuxc {
+	pinctrl-0 = <
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_base>;
 
 	pinctrl_hog_base: hog-base-grp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
+			/* GPIOs for memory coding */
 			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
 			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
+			/* GPIOs for hardware coding */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
 		>;
 	};
 
+	/* DHCOM GPIOs */
+	pinctrl_dhcom_a: dhcom-a-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x400120b0>;
+	};
+
+	pinctrl_dhcom_b: dhcom-b-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x400120b0>;
+	};
+
+	pinctrl_dhcom_c: dhcom-c-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x400120b0>;
+	};
+
+	pinctrl_dhcom_d: dhcom-d-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0>;
+	};
+
+	pinctrl_dhcom_e: dhcom-e-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x400120b0>;
+	};
+
+	pinctrl_dhcom_f: dhcom-f-grp {
+		fsl,pins = <MX6QDL_PAD_DI0_PIN4__GPIO4_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_g: dhcom-g-grp {
+		fsl,pins = <MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x400120b0>;
+	};
+
+	pinctrl_dhcom_h: dhcom-h-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW0__GPIO4_IO07	0x400120b0>;
+	};
+
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_COL1__GPIO4_IO08	0x400120b0>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW1__GPIO4_IO09	0x400120b0>;
+	};
+
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x400120b0>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x400120b0>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x400120b0>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_CMD__GPIO1_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x400120b0>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT1__GPIO1_IO17	0x400120b0>;
+	};
+
+	pinctrl_dhcom_t: dhcom-t-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT2__GPIO1_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_u: dhcom-u-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_CLK__GPIO1_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_v: dhcom-v-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_w: dhcom-w-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x400120b0>;
+	};
+
 	pinctrl_ecspi1: ecspi1-grp {
 		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
 			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
 			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
 			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
 			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
 		>;
@@ -272,18 +575,18 @@
 
 	pinctrl_ecspi2: ecspi2-grp {
 		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
-			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
 			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
 			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
 		>;
 	};
 
 	pinctrl_enet_100M: enet-100M-grp {
 		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
 			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
 			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
@@ -291,8 +594,6 @@
 			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
 			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x000b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x000b1
 		>;
 	};
 
@@ -302,10 +603,17 @@
 		>;
 	};
 
+	pinctrl_ethphy0: ethphy0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0xb0 /* Reset */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0xb1 /* Int */
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1-grp {
 		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
 			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
 		>;
 	};
 
@@ -358,34 +666,46 @@
 		>;
 	};
 
-	pinctrl_pmic_hw300: pmic-hw300-grp {
+	pinctrl_pcie: pcie-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1B0B0
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
 		>;
 	};
 
-	pinctrl_rtc_hw300: rtc-hw300-grp {
+	pinctrl_rtc: rtc-grp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120B0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120b0
 		>;
 	};
 
-	pinctrl_tsc2004_hw300: tsc2004-hw300-grp {
+	pinctrl_tsc2004: tsc2004-grp {
 		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120B0
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120b0
 		>;
 	};
 
 	pinctrl_uart1: uart1-grp {
 		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
 			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
 			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
 			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
 			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
 			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 		>;
 	};
 
@@ -407,7 +727,7 @@
 
 	pinctrl_usbh1: usbh1-grp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120B0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120b0
 		>;
 	};
 
@@ -419,32 +739,32 @@
 
 	pinctrl_usdhc2: usdhc2-grp {
 		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120b0
 			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
 			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
 			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120B0
 		>;
 	};
 
 	pinctrl_usdhc3: usdhc3-grp {
 		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
 			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
 			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120B0
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120b0
 		>;
 	};
 
 	pinctrl_usdhc4: usdhc4-grp {
 		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
 			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
 			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
 			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
 			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
@@ -455,92 +775,41 @@
 			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
 		>;
 	};
-};
-
-&reg_arm {
-	vin-supply = <&sw3_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&sw1_reg>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&sw2_reg>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
 
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	status = "okay";
-};
+	pinctrl_weim: weim-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0a6
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0a6
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0a6
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0a6
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0a6
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0a6
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0a6
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0a6
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0a6
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0a6
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0a6
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0a6
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0a6
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0a6
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0a6
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0a6
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb060 /* LE */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0a6
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0a6 /* WE */
+		>;
+	};
 
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	keep-power-in-suspend;
-	status = "disabled";
-};
+	pinctrl_weim_cs0: weim-cs0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
 
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	non-removable;
-	bus-width = <8>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	status = "okay";
+	pinctrl_weim_cs1: weim-cs1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0b1
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 3c04b5a4f3cb..069c27fab432 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -626,6 +626,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 8e587e17e75d..b1df2beb2832 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -728,6 +728,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 29ba24c273e9..cda48bf2f168 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -812,6 +812,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index c15b9cc63bf8..4662408b225a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -687,6 +687,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 304f3fb88fab..612b6e068e28 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -467,6 +467,11 @@
 		};
 	};
 
+	crypto@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+
 	imu@6a {
 		compatible = "st,lsm9ds1-imu";
 		reg = <0x6a>;
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
new file mode 100644
index 000000000000..69ae430a53bd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	touchscreen@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply  = <&reg_3v3>;
+		pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = /bits/ 16 <850>;
+		ti,y-plate-ohms = /bits/ 16 <295>;
+		ti,pressure-min = /bits/ 16 <2>;
+		ti,pressure-max = /bits/ 16 <1500>;
+		ti,vref-mv	= /bits/ 16 <3300>;
+		ti,settle-delay-usec = /bits/ 16 <15>;
+		ti,vref-delay-usecs = /bits/ 16 <0>;
+		ti,penirq-recheck-delay-usecs = /bits/ 16 <100>;
+		ti,debounce-max = /bits/ 16 <100>;
+		ti,debounce-tol = /bits/ 16 <(~0)>;
+		ti,debounce-rep = /bits/ 16 <4>;
+		touchscreen-swapped-x-y;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
new file mode 100644
index 000000000000..77a91a97e6cf
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		can0 = &can1;
+		can1 = &can2;
+		mdio-gpio0 = &mdio;
+		nand = &gpmi;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, /* 24V */
+		              <&adc 1>; /* temperature */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "D1";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mdio: mdio {
+		compatible = "microchip,mdio-smi0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
+			<&gpio1 22 GPIO_ACTIVE_HIGH>;
+
+		switch@0 {
+			compatible = "microchip,ksz8873";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			interrupt-parent = <&gpio3>;
+			interrupt = <30 IRQ_TYPE_LEVEL_HIGH>;
+			reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports@0 {
+					reg = <0>;
+					phy-mode = "internal";
+					label = "lan1";
+				};
+
+				ports@1 {
+					reg = <1>;
+					phy-mode = "internal";
+					label = "lan2";
+				};
+
+				ports@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&fec>;
+					phy-mode = "rmii";
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v0>;
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v0: regulator-24v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "24v0";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can1_stby>;
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2_stby>;
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vcc_mmc: regulator-vcc-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc>;
+		vin-supply = <&reg_3v3>;
+		regulator-name = "mmc_vcc_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+	};
+
+	reg_vcc_mmc_io: regulator-vcc-mmc-io {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc_io>;
+		vin-supply = <&reg_5v0>;
+		regulator-name = "mmc_io_supply";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		states = <1800000 0x1>, <3300000 0x0>;
+		startup-delay-us = <100>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <54000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clk50m_phy>;
+	clock-names = "ipg", "ahb", "ptp";
+	phy-mode = "rmii";
+	phy-supply = <&reg_3v3>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm3 {
+	/* used for LCD contrast control */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5v0>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* no usbh2 */
+&usbphynop1 {
+	status = "disabled";
+};
+
+/* no usbh3 */
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5v0>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	mmc-ddr-1_8v;
+	vmmc-supply = <&reg_vcc_mmc>;
+	vqmmc-supply = <&reg_vcc_mmc_io>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX			0x3008
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX			0x1b000
+		>;
+	};
+
+	pinctrl_can1_stby: can1stbygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x13008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+		>;
+	};
+
+	pinctrl_can2_stby: can2stbygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11			0x13008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0xb1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0xb1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24			0x58
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0xb1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0xb1
+			/* external pull up */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x58
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* RMII 50 MHz */
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x100f5
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x100f5
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x100c0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x100c0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x100f5
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x100f5
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x58
+			/* GPIO for "link active" */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24		0x3038
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE			0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE			0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B		0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B		0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B		0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B			0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B			0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00		0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01		0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02		0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03		0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04		0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05		0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06		0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x40010878
+			/* external 10 k pull up */
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x40010878
+		>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22		0x100b1
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31			0xb1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT			0x58
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT			0x58
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0xb0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01			0x1b040
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00			0x1b040
+		>;
+	};
+
+	pinctrl_vcc_mmc: vccmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08			0x58
+		>;
+	};
+
+	pinctrl_vcc_mmc_io: vccmmciogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x58
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
new file mode 100644
index 000000000000..234827e554d0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_solidsense_leds>;
+
+		/* Red/Green LED1 - next to WiFi SMA */
+		led-11 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Red/Green LED2 - next to GPS SMA */
+		led-21 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-22 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&audio {
+	status = "disabled";
+};
+
+&ecspi2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
+
+	solidsense {
+		pinctrl_solidsense_hog: solidsense-hog {
+			fsl,pins = <
+				/* Nordic RESET_N */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
+				/* Nordic Chip 1 SWDIO - GPIO 125 */
+				MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
+				/* Nordic Chip 1 SWDCLK - GPIO 59 */
+				/* already claimed in the HB2 hogs */
+				/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
+				/* Nordic Chip 2 SWDIO - GPIO 81 */
+				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
+				/* Nordic Chip 2 SWCLK - GPIO 82 */
+				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
+			>;
+		};
+
+		pinctrl_solidsense_leds: solidsense-leds {
+			fsl,pins = <
+				/* Red LED 1 - GPIO 58 */
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
+				/* Green LED 1 - GPIO 55 */
+				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
+				/* Red LED 2 - GPIO 57 */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
+				/* Green LED 2 - GPIO 56 */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
+			>;
+		};
+
+		pinctrl_solidsense_uart2: solidsense-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_solidsense_uart3: solidsense-uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&sgtl5000 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
index c42723989bc0..b92e0f2748a5 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
@@ -208,6 +208,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
+	assigned-clock-rates = <125000000>;
 	status = "okay";
 
 	phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/imx6s-dhcom-drc02.dts b/arch/arm/boot/dts/imx6s-dhcom-drc02.dts
new file mode 100644
index 000000000000..4077b607c29e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6s-dhcom-drc02.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6S-C0800-R102-F0409-E-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 493-400 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+/dts-v1/;
+
+/*
+ * The kernel only distinguishes between i.MX6 Quad and DualLite,
+ * but the Solo is actually a DualLite with only one CPU. So use
+ * DualLite for the Solo and disable one CPU node.
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-drc02.dtsi"
+
+/ {
+	model = "DH electronics i.MX6S DHCOM on DRC02";
+	compatible = "dh,imx6s-dhcom-drc02", "dh,imx6s-dhcom-som",
+		     "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 8cbae656395c..89cbf13097a4 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -21,6 +21,27 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <150>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
 };
 
 &clks {
@@ -56,6 +77,27 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&reg_brcm>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -76,6 +118,13 @@
 };
 
 &iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			/* WIFI_PWR_EN */
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
@@ -90,6 +139,39 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
@@ -143,4 +225,13 @@
 			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
 		>;
 	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WiFi Reg On */
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
+			/* WiFi Sleep 32k */
+			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a22d41e0cf31..1843fc053870 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -707,6 +707,34 @@
 				status = "disabled";
 			};
 
+			ftm1: pwm@30640000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				reg = <0x30640000 0x10000>;
+				#pwm-cells = <3>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			ftm2: pwm@30650000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				reg = <0x30650000 0x10000>;
+				#pwm-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
+				status = "disabled";
+			};
+
 			pwm1: pwm@30660000 {
 				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 				reg = <0x30660000 0x10000>;
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
index 1412a1a968fc..0614f82b808e 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -29,7 +29,7 @@
 		compatible = "arm,im-pd1-syscon", "syscon";
 		reg = <0x00000000 0x1000>;
 
-		vco1: clock@00 {
+		vco1: vco1-clock {
 			compatible = "arm,impd1-vco1";
 			#clock-cells = <0>;
 			lock-offset = <0x08>;
@@ -38,7 +38,7 @@
 			clock-output-names = "IM-PD1-VCO1";
 		};
 
-		vco2: clock@04 {
+		vco2: vco2-clock {
 			compatible = "arm,impd1-vco2";
 			#clock-cells = <0>;
 			lock-offset = <0x08>;
diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
new file mode 100644
index 000000000000..44c017b78008
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for ADI Engineering Coyote platform.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ADI Engineering Coyote reference design";
+	compatible = "adieng,coyote", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* CHECKME: 16 MB SDRAM minimum, maybe the Coyote actually has more */
+		device_type = "memory";
+		reg = <0x00000000 0x01000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0 and CS1
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0x1ff>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from Coyote PCI boardfile.
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
+			<0x0800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 6 */
+			<0x0800 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 6 */
+			<0x0800 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 6 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+			<0x1000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 11 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 11 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
new file mode 100644
index 000000000000..7200126cb3b5
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Arcom/Eurotech Vulcan board.
+ * This board is a single board computer in the PC/104 form factor based on
+ * IXP425, and was released around 2005. It previously had the name "Mercury".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Arcom/Eurotech Vulcan";
+	compatible = "arcom,vulcan", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* CHECKME: using a harddrive at /dev/sda1 as rootfs by default */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0 and CS1.
+				 *
+				 * The documentation mentions the existence
+				 * of a 16MB version, which we conveniently
+				 * ignore. Shout if you own one!
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <3>;
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x1ff>;
+				};
+			};
+			sram@2,0 {
+				/* 256 KB SDRAM memory at CS2 */
+				compatible = "shared-dma-pool";
+				device_type = "memory";
+				reg = <2 0x00000000 0x40000>;
+				no-map;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <1>;
+				intel,ixp4xx-eb-t4 = <2>;
+				intel,ixp4xx-eb-ahb-split-transfers = <1>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			serial@3,0 {
+				/*
+				 * 8250-compatible Exar XR16L2551 2 x UART
+				 *
+				 * CHECKME: if special tweaks are needed, then fix the
+				 * operating system to handle it.
+				 */
+				compatible = "exar,xr16l2551", "ns8250";
+				reg = <3 0x00000000 0x10>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				clock-frequency = <1843200>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <3>;
+				intel,ixp4xx-eb-cycle-type = <1>; /* Motorola cycles */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			gpio1: gpio@4,0 {
+				/*
+				 * MMIO GPIO in one byte
+				 */
+				compatible = "arcom,vulcan-gpio";
+				reg = <4 0x00000000 0x1>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			watchdog@5,0 {
+				compatible = "maxim,max6369";
+				reg = <5 0x00000000 0x1>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from Vulcan PCI boardfile.
+			 *
+			 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
+			 * per slot. This interrupt is shared (OR:ed) by all four pins.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
+			<0x0800 0 0 2 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 2 */
+			<0x0800 0 0 3 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 2 */
+			<0x0800 0 0 4 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 2 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 3 */
+			<0x1000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 3 */
+			<0x1000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 3 */
+			<0x1000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 3 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
new file mode 100644
index 000000000000..8b32e9f22d81
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for D-Link DSM-G600 revision A based on IXP420
+ * NOTE: revision B of this device uses PowerPC and is NOT supported by
+ * this device tree.
+ *
+ * Inspired by the boardfile by Rod Whitby, Tower Technologies, Alessandro Zummo
+ * and Michael Westerhof.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DSM-G600 rev A";
+	compatible = "dlink,dsm-g600-a", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "dsmg600:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wlan {
+			label = "dsmg600:green:wlan";
+			/* CHECKME: flagged as active low in the old board file */
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			/* We don't have WLAN trigger in the kernel (yet) */
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys_polled {
+		compatible = "gpio-keys-polled";
+
+		/*
+		 * According to the board file this key cannot handle interrupts and
+		 * need to be polled. Investigate if this is really the case or if
+		 * this can be moved adjacent to the ordinary gpio-keys above.
+		 */
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 16 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/*
+					 * A boot log says the directory is at 0xfe0000
+					 * 0x7f * 0x20000 = 0xfe0000
+					 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
+			 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
+			 * Only slot 3 have three IRQs.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 10 */
+			<0x1800 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 9 */
+			<0x1800 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 8 */
+			/* IDSEL 4 */
+			<0x2000 0 0 3 &gpio0 6  IRQ_TYPE_LEVEL_LOW>; /* INT F on slot 4 is irq 6 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
new file mode 100644
index 000000000000..77e78c6dc2cd
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Freecom FSG-3 router.
+ * This machine is based on IXP425.
+ * This device tree is inspired by the board file by Rod Whitby.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Freecom FSG-3";
+	compatible = "freecom,fsg-3", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* Boot from the first partition on the hard drive */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-sync {
+			wakeup-source;
+			/* Closest approximation of what the key should do */
+			linux,code = <KEY_CONNECT>;
+			label = "sync";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+		button-usb {
+			wakeup-source;
+			/* Unplug USB, closest approximation of what the key should do */
+			linux,code = <KEY_EJECTCD>;
+			label = "usb";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			/*
+			 * Temperature sensor and fan control chip.
+			 *
+			 * TODO: create a proper device tree binding for
+			 * the sensor and temperature zone and create a
+			 * zone with fan control.
+			 */
+			compatible = "winbond,w83781d";
+			reg = <0x28>;
+		};
+		rtc@6f {
+			compatible = "isil,isl1208";
+			reg = <0x6f>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 4 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x400000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x3e0000 */
+					fis-index-block = <0x1f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Written based on the FSG-3 PCI boardfile.
+			 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
+			 */
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
new file mode 100644
index 000000000000..a20277ff0420
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Gateworks Avila GW2348 board.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateworks Avila GW2348";
+	compatible = "gateworks,gw2348", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2348:green:user";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+			ide@1,0 {
+				compatible = "intel,ixp4xx-compact-flash";
+				/*
+				 * Set up expansion bus config to a really slow timing.
+				 * The CF driver will dynamically reconfigure these timings
+				 * depending on selected PIO mode (0-4).
+				 */
+				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* First register set is CMD second is CTL (notice it uses CS2) */
+				reg = <1 0x00000000 0x1000000>, <2 0x00000000 0x1000000>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+			};
+			/*
+			 * FIXME: Latch LEDs or extra UARTs at CS4
+			 */
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from Avila PCI boardfile.
+			 *
+			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
new file mode 100644
index 000000000000..8c18d802c849
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Iomega NAS 100D
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Iomega NAS 100D";
+	compatible = "iom,nas-100d", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-wlan {
+			label = "nas100d:red:wlan";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			/* We don't have WLAN trigger in the kernel (yet) */
+			linux,default-trigger = "netdev";
+		};
+		led-disk {
+			label = "nas100d:red:disk";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "disk-activity";
+		};
+		led-power {
+			label = "nas100d:red:power";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
+			 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 7  IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 3 is irq 7 */
+		};
+
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
new file mode 100644
index 000000000000..beaadda4685f
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP425 also known as IXCDP1100 Control Plane
+ * processor reference design.
+ *
+ * This platform has the codename "Richfield".
+ *
+ * This machine is based on a 533 MHz IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDP425/IXCDP1100 Richfield Reference Design";
+	compatible = "intel,ixdp425", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
new file mode 100644
index 000000000000..002a8705abc9
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDPG425 reference design.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ *
+ * The device has 4 x FXS RJ11 ports for analog phones for
+ * internet telephony. (Not supported yet.)
+ *
+ * The device has 9 status LEDs we do not support yet.
+ *
+ * This device is very similar to ADI engingeering Coyote.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDPG425 reference design";
+	compatible = "intel,ixdpg425", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * CHECKME: the product brief says 16MB in a flash
+				 * socket.
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from IXDPG425 PCI boardfile.
+			 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
+			 * for 12 & 13 and one for 14.
+			 */
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
+			<0x6000 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 7 */
+			<0x6000 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 7 */
+			<0x6000 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 7 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/*
+		 * CHECKME: this ethernet setup seems dubious. Photos of the board shows some kind
+		 * of Realtek DSA switch on the board.
+		 */
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
index 5b8dcc19deee..e3a32b08d167 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -96,16 +96,16 @@
 	};
 
 	soc {
-		bus@50000000 {
+		bus@c4000000 {
 			/* The first 16MB region at CS0 on the expansion bus */
-			flash@0 {
+			flash@0,0 {
 				compatible = "intel,ixp4xx-flash", "cfi-flash";
 				bank-width = <2>;
 				/*
 				 * 8 MB of Flash in 0x20000 byte blocks
 				 * mapped in at CS0.
 				 */
-				reg = <0x00000000 0x800000>;
+				reg = <0 0x00000000 0x800000>;
 
 				partitions {
 					compatible = "redboot-fis";
@@ -124,20 +124,20 @@
 			 */
 			interrupt-map =
 			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
-			<0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
-			<0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
 			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
-			<0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 11 3>, /* INT C on slot 2 is irq 11 */
-			<0x1000 0 0 4 &gpio0 8  3>, /* INT D on slot 2 is irq 8 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 8 */
 			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
-			<0x1800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
-			<0x1800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
-			<0x1800 0 0 4 &gpio0 8  3>; /* INT D on slot 3 is irq 8 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x1800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x1800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 8 */
 		};
 
 		ethernet@c8009000 {
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
new file mode 100644
index 000000000000..6b28dda747fd
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Linksys WRV54G router
+ * Also known as Gemtek GTWX5715
+ * Based on a board file by George T. Joseph and other patches.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys WRV54G / Gemtek GTWX5715";
+	compatible = "linksys,wrv54g", "gemtek,gtwx5715", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* UART2 is the primary console */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "wrv54g:yellow:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			label = "wrv54g:yellow:wireless";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-internet {
+			label = "wrv54g:yellow:internet";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-dmz {
+			label = "wrv54g:green:dmz";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	/* This set-up comes from an OpenWrt patch */
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 8 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x00800000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					/*
+					 * Partition info from a boot log
+					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
+					 */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "boot";
+						reg = <0x0 0x140000>;
+						read-only;
+					};
+					partition@140000 {
+						label = "linux";
+						reg = <0x140000 0x100000>;
+						read-only;
+					};
+					partition@240000 {
+						label = "root";
+						reg = <0x240000 0x480000>;
+						read-write;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
+			 * Derived from the GTWX5715 PCI boardfile.
+			 */
+			interrupt-map =
+			/* IDSEL 0 */
+			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
+			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
+		};
+
+		/*
+		 * EthB - connected to the KS8995 switch ports 1-4
+		 * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
+		 * all four switch ports, also using an out of tree multiphy patch.
+		 * Do we need a new binding and property for this?
+		 */
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* Should be ports 1-4 on the KS8995 switch */
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				/* Should be port 5 on the KS8995 switch */
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC - connected to KS8995 switch port 5 */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts
new file mode 100644
index 000000000000..04a0f7138967
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Netgear WG302v2 based on IXP422BB
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear WG302 v2";
+	compatible = "netgear,wg302v2", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 16 MB SDRAM according to OpenWrt database */
+		device_type = "memory";
+		reg = <0x00000000 0x01000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0 and CS1
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0xff>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
+			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
+			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
+			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
+			<0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
+			<0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
+		};
+
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy8>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy8: ethernet-phy@8 {
+					reg = <8>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
index 84158503be2a..f5846a50e4d4 100644
--- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
@@ -28,48 +28,52 @@
 		serial0 = &uart0;
 	};
 
-	flash@50000000 {
-		compatible = "intel,ixp4xx-flash", "cfi-flash";
-		bank-width = <2>;
-		/*
-		 * 16 MB of Flash
-		 */
-		reg = <0x50000000 0x1000000>;
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 16 MB of Flash
+				 */
+				reg = <0 0x00000000 0x1000000>;
 
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
 
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "zImage";
-				reg = <0x00080000 0x00100000>;
-				read-only;
-			};
-			partition@180000 {
-				label = "ramdisk";
-				reg = <0x00180000 0x00300000>;
-				read-only;
-			};
-			partition@480000 {
-				label = "User";
-				reg = <0x00480000 0x00b60000>;
-				read-only;
-			};
-			partition@fe0000 {
-				label = "FIS directory";
-				reg = <0x00fe0000 0x001f000>;
-				read-only;
-			};
-			partition@fff000 {
-				label = "RedBoot config";
-				reg = <0x00fff000 0x0001000>;
-				read-only;
+					partition@0 {
+						label = "RedBoot";
+						reg = <0x00000000 0x00080000>;
+						read-only;
+					};
+					partition@80000 {
+						label = "zImage";
+						reg = <0x00080000 0x00100000>;
+						read-only;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <0x00180000 0x00300000>;
+						read-only;
+					};
+					partition@480000 {
+						label = "User";
+						reg = <0x00480000 0x00b60000>;
+						read-only;
+					};
+					partition@fe0000 {
+						label = "FIS directory";
+						reg = <0x00fe0000 0x001f000>;
+						read-only;
+					};
+					partition@fff000 {
+						label = "RedBoot config";
+						reg = <0x00fff000 0x0001000>;
+						read-only;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
index 5fa063ed396c..d0e0f8afb7c9 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -7,6 +7,11 @@
 
 / {
 	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+			reg = <0xc4000000 0x28>;
+		};
+
 		pci@c0000000 {
 			compatible = "intel,ixp42x-pci";
 		};
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
index 60a1228a970f..84e6aec8e665 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
@@ -77,15 +77,17 @@
 	};
 
 	soc {
-		bus@50000000 {
-			flash@0 {
+		bus@c4000000 {
+			flash@0,0 {
 				compatible = "intel,ixp4xx-flash", "cfi-flash";
 				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
 				/*
 				 * 32 MB of Flash in 0x20000 byte blocks
-				 * mapped in at CS0.
+				 * mapped in at CS0 and CS1
 				 */
-				reg = <0x00000000 0x2000000>;
+				reg = <0 0x00000000 0x2000000>;
 
 				partitions {
 					compatible = "redboot-fis";
@@ -93,6 +95,29 @@
 					fis-index-block = <0xff>;
 				};
 			};
+			ide@3,0 {
+				compatible = "intel,ixp4xx-compact-flash";
+				/*
+				 * Set up expansion bus config to a really slow timing.
+				 * The CF driver will dynamically reconfigure these timings
+				 * depending on selected PIO mode (0-4).
+				 */
+				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* First register set is CMD second is CTL */
+				reg = <3 0xe00000 0x40000>, <3 0xe40000 0x40000>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+			};
 		};
 
 		pci@c0000000 {
@@ -108,35 +133,35 @@
 			 */
 			interrupt-map =
 			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
-			<0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
-			<0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
 			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
-			<0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 8  3>, /* INT C on slot 2 is irq 8 */
-			<0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
 			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
-			<0x1800 0 0 2 &gpio0 8  3>, /* INT B on slot 3 is irq 8 */
-			<0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
-			<0x1800 0 0 4 &gpio0 10 3>, /* INT D on slot 3 is irq 10 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
 			/* IDSEL 4 */
-			<0x2000 0 0 1 &gpio0 8  3>, /* INT A on slot 3 is irq 8 */
-			<0x2000 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
-			<0x2000 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
-			<0x2000 0 0 4 &gpio0 9  3>, /* INT D on slot 3 is irq 9 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 9 */
 			/* IDSEL 6 */
-			<0x3000 0 0 1 &gpio0 10 3>, /* INT A on slot 3 is irq 10 */
-			<0x3000 0 0 2 &gpio0 9  3>, /* INT B on slot 3 is irq 9 */
-			<0x3000 0 0 3 &gpio0 8  3>, /* INT C on slot 3 is irq 8 */
-			<0x3000 0 0 4 &gpio0 11 3>, /* INT D on slot 3 is irq 11 */
+			<0x3000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 10 */
+			<0x3000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 9 */
+			<0x3000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 8 */
+			<0x3000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 11 */
 			/* IDSEL 15 */
-			<0x7800 0 0 1 &gpio0 8  3>, /* INT A on slot 3 is irq 8 */
-			<0x7800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
-			<0x7800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
-			<0x7800 0 0 4 &gpio0 9  3>; /* INT D on slot 3 is irq 9 */
+			<0x7800 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+			<0x7800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x7800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x7800 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 9 */
 		};
 
 		ethernet@c800a000 {
diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
new file mode 100644
index 000000000000..3d7cfa1a5ed4
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel KIXRP435 Control Plane
+ * processor reference design.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel KIXRP435 Reference Design";
+	compatible = "intel,kixrp435", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		ethernet@c800c000 {
+			status = "ok";
+			queue-rx = <&qmgr 2>;
+			queue-txready = <&qmgr 19>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+			intel,npe-handle = <&npe 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi
index 1d0817c6e3f9..60bf9903e0f8 100644
--- a/arch/arm/boot/dts/intel-ixp43x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp43x.dtsi
@@ -8,6 +8,12 @@
 
 / {
 	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+			/* Uses at least up to 0x230 */
+			reg = <0xc4000000 0x1000>;
+		};
+
 		pci@c0000000 {
 			compatible = "intel,ixp43x-pci";
 		};
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
index cce49e809043..b6ff614dadc6 100644
--- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
@@ -9,6 +9,17 @@
 
 / {
 	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp46x-expansion-bus-controller", "syscon";
+			/* Uses at least up to 0x124 */
+			reg = <0xc4000000 0x1000>;
+		};
+
+		rng@70002100 {
+			compatible = "intel,ixp46x-rng";
+			reg = <0x70002100 4>;
+		};
+
 		interrupt-controller@c8003000 {
 			compatible = "intel,ixp43x-interrupt";
 		};
diff --git a/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts b/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts
new file mode 100644
index 000000000000..a062cd1a6588
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP465 Control Plane processor reference
+ * design, codename "BMP".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp45x-ixp46x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDP465 BMP Reference Design";
+	compatible = "intel,ixdp465", "intel,ixp46x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 32 MB of Flash mapped in at CS0 and CS1 */
+				reg = <0 0x00000000 0x2000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x1fe0000 */
+					fis-index-block = <0xff>;
+				};
+			};
+		};
+		/* TODO: configure ethernet etc */
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
new file mode 100644
index 000000000000..c1d9c49982b3
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree include file for Intel reference designs for the
+ * XScale Network Processors in the IXP 4xx series. Common device
+ * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
+ */
+
+/ {
+	memory@0 {
+		/*
+		 * The board supports up to 256 MB of memory. Here we put in
+		 * 64 MB and this may be modified by the boot loader.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eeprom@50 {
+			/*
+			 * Philips PCF8582C-2T/03 512byte I2C EEPROM
+			 * should behave like an Atmel 24c04.
+			 */
+			compatible = "atmel,24c04";
+			reg = <0x50>;
+			pagesize = <16>;
+			size = <512>;
+			read-only;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			/* Flash memory defined per-variant */
+			nand-controller@3,0 {
+				/* Some designs have a NAND on CS3 enable it here if present */
+				status = "disabled";
+
+				/*
+				 * gen_nand needs to be extended and documented to get
+				 * command byte = 1 and address byte = 2 from the device
+				 * tree.
+				 */
+				compatible = "gen_nand";
+
+				/* Expansion bus set-up */
+				intel,ixp4xx-eb-t1 = <0>;
+				intel,ixp4xx-eb-t2 = <0>;
+				intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
+				intel,ixp4xx-eb-t4 = <0>;
+				intel,ixp4xx-eb-t5 = <0>;
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+
+				/* 512 bytes memory window */
+				reg = <3 0x00000000 0x200>;
+				nand-on-flash-bbt;
+				nand-ecc-mode = "soft_bch";
+				nand-ecc-step-size = <512>;
+				nand-ecc-strength = <4>;
+				nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
+
+				label = "ixp400 NAND";
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					fs@0 {
+						label = "ixp400 NAND FS 0";
+						reg = <0x0 0x800000>;
+					};
+					fs@800000 {
+						label = "ixp400 NAND FS 1";
+						reg = <0x800000 0x0>;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from IXDP425 PCI boardfile.
+			 * PCI slots on the BIXMB425BD base card.
+			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi
index a50427ad05e7..e5af2d463074 100644
--- a/arch/arm/boot/dts/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi
@@ -15,16 +15,30 @@
 		interrupt-parent = <&intcon>;
 
 		/*
-		 * The IXP4xx expansion bus is a set of 16 or 32MB
-		 * windows in the 256MB space from 0x50000000 to
-		 * 0x5fffffff.
+		 * The IXP4xx expansion bus is a set of up to 7 each up to 16MB
+		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
 		 */
-		bus@50000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
+		bus@c4000000 {
+			/* compatible and reg filled in by per-soc device tree */
+			native-endian;
+			#address-cells = <2>;
 			#size-cells = <1>;
-			ranges = <0x00000000 0x50000000 0x10000000>;
-			dma-ranges = <0x00000000 0x50000000 0x10000000>;
+			ranges = <0 0x0 0x50000000 0x01000000>,
+				 <1 0x0 0x51000000 0x01000000>,
+				 <2 0x0 0x52000000 0x01000000>,
+				 <3 0x0 0x53000000 0x01000000>,
+				 <4 0x0 0x54000000 0x01000000>,
+				 <5 0x0 0x55000000 0x01000000>,
+				 <6 0x0 0x56000000 0x01000000>,
+				 <7 0x0 0x57000000 0x01000000>;
+			dma-ranges = <0 0x0 0x50000000 0x01000000>,
+				 <1 0x0 0x51000000 0x01000000>,
+				 <2 0x0 0x52000000 0x01000000>,
+				 <3 0x0 0x53000000 0x01000000>,
+				 <4 0x0 0x54000000 0x01000000>,
+				 <5 0x0 0x55000000 0x01000000>,
+				 <6 0x0 0x56000000 0x01000000>,
+				 <7 0x0 0x57000000 0x01000000>;
 		};
 
 		qmgr: queue-manager@60000000 {
@@ -83,6 +97,20 @@
 			no-loopback-test;
 		};
 
+		uart1: serial@c8001000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8001000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
 		gpio0: gpio@c8004000 {
 			compatible = "intel,ixp4xx-gpio";
 			reg = <0xc8004000 0x1000>;
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index ad15e77874b1..71064483d34f 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -95,7 +95,7 @@ qmss: qmss@2a40000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		pdsp0@0x2a10000 {
+		pdsp0@2a10000 {
 			reg = <0x2a10000 0x1000    /*iram */
 			       0x2a0f000 0x100     /*reg*/
 			       0x2a0c000 0x3c8	   /*intd */
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index d5a6c1f5633c..022d93c366c7 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -112,7 +112,7 @@ qmss: qmss@2a40000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		pdsp0@0x2a10000 {
+		pdsp0@2a10000 {
 			reg = <0x2a10000 0x1000    /*iram */
 			       0x2a0f000 0x100     /*reg*/
 			       0x2a0c000 0x3c8	   /*intd */
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index c1f982604145..e96ca664abc2 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -94,7 +94,7 @@ qmss: qmss@2a40000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		pdsp0@0x2a10000 {
+		pdsp0@2a10000 {
 			reg = <0x2a10000 0x1000    /*iram */
 			       0x2a0f000 0x100     /*reg*/
 			       0x2a0c000 0x3c8	   /*intd */
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index bd0e864964e9..3be7cba603d5 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	#address-cells = <1>;
@@ -36,6 +37,17 @@
 				reg = <0x4000 0x400>;
 			};
 
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x5400 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
 			assist: assist@7c00 {
 				compatible = "amlogic,meson-mx-assist", "syscon";
 				reg = <0x7c00 0x200>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 157a950a55d3..f80ddc98d3a2 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -304,14 +304,42 @@
 					  "pp2", "ppmmu2", "pp4", "ppmmu4",
 					  "pp5", "ppmmu5", "pp6", "ppmmu6";
 			resets = <&reset RESET_MALI>;
+
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
 			operating-points-v2 = <&gpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 }; /* end of / */
 
+&aiu {
+	compatible = "amlogic,aiu-meson8", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
 &aobus {
 	pmu: pmu@e0 {
 		compatible = "amlogic,meson8-pmu", "syscon";
@@ -335,6 +363,38 @@
 			gpio-ranges = <&pinctrl_aobus 0 0 16>;
 		};
 
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
 		uart_ao_a_pins: uart_ao_a {
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
@@ -455,6 +515,14 @@
 			};
 		};
 
+		spdif_out_pins: spdif-out {
+			mux {
+				groups = "spdif_out";
+				function = "spdif";
+				bias-disable;
+			};
+		};
+
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 8e48ccc6b634..77d4beeb8010 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -96,6 +96,32 @@
 		#clock-cells = <0>;
 	};
 
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "M8B-EC100";
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-rates = <270950400>,
+				       <294912000>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rt5640>;
+			};
+		};
+	};
+
 	usb_vbus: regulator-usb-vbus {
 		/*
 		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
@@ -148,7 +174,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -232,7 +258,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -242,6 +268,14 @@
 	};
 };
 
+&aiu {
+	status = "okay";
+
+	pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>,
+		    <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &cpu0 {
 	cpu-supply = <&vcck>;
 };
@@ -283,9 +317,19 @@
 
 	rt5640: codec@1c {
 		compatible = "realtek,rt5640";
+
 		reg = <0x1c>;
+
+		#sound-dai-cells = <0>;
+
 		interrupt-parent = <&gpio_intc>;
 		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+
+		/*
+		 * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN.
+		 * We currently cannot configure this pin correctly.
+		 * Luckily for us it's in the "right" state by default.
+		 */
 		realtek,in1-differential;
 	};
 };
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index f3937d55472d..7adedd3258c3 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -34,6 +34,8 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
+		pwm-supply = <&vcc_5v>;
+
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
 
@@ -79,7 +81,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index c440ef94e082..04356bc639fa 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -131,7 +131,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 0 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -163,7 +163,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 1 12218 0>;
 		pwm-dutycycle-range = <91 0>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index c02b03cbcdf4..b49b7cbaed4e 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -279,6 +279,29 @@
 	};
 }; /* end of / */
 
+&aiu {
+	compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
 &aobus {
 	pmu: pmu@e0 {
 		compatible = "amlogic,meson8b-pmu", "syscon";
@@ -302,6 +325,46 @@
 			gpio-ranges = <&pinctrl_aobus 0 0 16>;
 		};
 
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_01";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		spdif_out_1_pins: spdif-out-1 {
+			mux {
+				groups = "spdif_out_1";
+				function = "spdif_1";
+				bias-disable;
+			};
+		};
+
 		uart_ao_a_pins: uart_ao_a {
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 3c11f7cfcc40..a7d62dbad602 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -160,7 +160,7 @@
 
 				trips {
 					cpu_passive: cpu-passive {
-						temperature = <47000>;
+						temperature = <57000>;
 						hysteresis = <2000>;
 						type = "passive";
 					};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index dea3dbc4a6a5..0334641f8829 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -105,11 +105,11 @@
 				label = "rootfs";
 				reg = <0x0600000 0x700000>;
 				};
-			spare1@D00000 {
+			spare1@d00000 {
 				label = "spare1";
 				reg = <0x0D00000 0x200000>;
 				};
-			spare2@0F00000 {
+			spare2@f00000 {
 				label = "spare2";
 				reg = <0x0F00000 0x200000>;
 				};
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
index a9573d441dea..7ae8b620515c 100644
--- a/arch/arm/boot/dts/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi
@@ -186,37 +186,39 @@
 		};
 
 		target-module@28000 {			/* 0x40128000, ap 8 08.0 */
+							/* 0x4012a000, ap 10 0a.0 */
 			compatible = "ti,sysc-mcasp", "ti,sysc";
 			reg = <0x28000 0x4>,
 			      <0x28004 0x4>;
 			reg-names = "rev", "sysc";
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
+					<SYSC_IDLE_SMART>;
 			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
 			clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x28000 0x1000>,
-				 <0x49028000 0x49028000 0x1000>;
-
-			/*
-			 * Child device unsupported by davinci-mcasp. At least
-			 * RX path is disabled for omap4, and only DIT mode
-			 * works with no I2S. See also old Android kernel
-			 * omap-mcasp driver for more information.
-			 */
-		};
-
-		target-module@2a000 {			/* 0x4012a000, ap 10 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>,
+				 <0x49028000 0x49028000 0x1000>,
+				 <0x2000 0x2a000 0x1000>,
 				 <0x4902a000 0x4902a000 0x1000>;
+
+			mcasp0: mcasp@0 {
+				compatible = "ti,omap4-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x4902a000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx";
+				dmas = <&sdma 8>;
+				dma-names = "tx";
+				clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+				clock-names = "fck";
+				op-mode = <1>;	/* MCASP_DIT_MODE */
+				serial-dir = < 1 >; /* 1 TX serializers */
+				status = "disabled";
+			};
 		};
 
 		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
index b8c5db2344aa..eb555f385283 100644
--- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
+++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
@@ -225,6 +225,27 @@
 			bias-pull-down;
 		};
 	};
+
+	ethernet_pins: ethernet-pins {
+		eth_rmii-pinmux {
+			groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
+				 "rmii_rxd0_mfp", "rmii_rxd1_mfp",
+				 "rmii_txen_mfp", "rmii_rxen_mfp",
+				 "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
+			function = "eth_rmii";
+		};
+
+		phy_clk-pinmux {
+			groups = "clko_25m_mfp";
+			function = "clko_25m";
+		};
+
+		ref_clk-pinconf {
+			groups = "rmii_ref_clk_drv";
+			drive-strength = <2>;
+		};
+
+	};
 };
 
 /* uSD */
@@ -241,6 +262,30 @@
 	vqmmc-supply = <&sd_vcc>;
 };
 
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
+		reset-delay-us = <10000>;
+		reset-post-delay-us = <150000>;
+
+		eth_phy: ethernet-phy@3 {
+			reg = <0x3>;
+			max-speed = <100>;
+			interrupt-parent = <&sirq>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
 &twd_timer {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index cd635f222d26..739b4b9cec8c 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -324,5 +324,15 @@
 			dma-names = "mmc";
 			status = "disabled";
 		};
+
+		ethernet: ethernet@b0310000 {
+			compatible = "actions,s500-emac", "actions,owl-emac";
+			reg = <0xb0310000 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "eth", "rmii";
+			resets = <&cmu RESET_ETHERNET>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 0a4ffd10c484..e1189e929ee6 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -1,25 +1,4 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 2687c4e890ba..0b2bed6e7adf 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -766,40 +766,40 @@
 					#size-cells = <0>;
 					#io-channel-cells = <2>;
 
-					vcoin: adc-channel@00 {
+					vcoin: adc-channel@0 {
 						reg = <0x00 0x00>;
 					};
-					vbat: adc-channel@01 {
+					vbat: adc-channel@1 {
 						reg = <0x00 0x01>;
 					};
-					dcin: adc-channel@02 {
+					dcin: adc-channel@2 {
 						reg = <0x00 0x02>;
 					};
-					vph_pwr: adc-channel@04 {
+					vph_pwr: adc-channel@4 {
 						reg = <0x00 0x04>;
 					};
-					batt_therm: adc-channel@08 {
+					batt_therm: adc-channel@8 {
 						reg = <0x00 0x08>;
 					};
-					batt_id: adc-channel@09 {
+					batt_id: adc-channel@9 {
 						reg = <0x00 0x09>;
 					};
-					usb_vbus: adc-channel@0a {
+					usb_vbus: adc-channel@a {
 						reg = <0x00 0x0a>;
 					};
-					die_temp: adc-channel@0b {
+					die_temp: adc-channel@b {
 						reg = <0x00 0x0b>;
 					};
-					ref_625mv: adc-channel@0c {
+					ref_625mv: adc-channel@c {
 						reg = <0x00 0x0c>;
 					};
-					ref_1250mv: adc-channel@0d {
+					ref_1250mv: adc-channel@d {
 						reg = <0x00 0x0d>;
 					};
-					chg_temp: adc-channel@0e {
+					chg_temp: adc-channel@e {
 						reg = <0x00 0x0e>;
 					};
-					ref_muxoff: adc-channel@0f {
+					ref_muxoff: adc-channel@f {
 						reg = <0x00 0x0f>;
 					};
 				};
@@ -1262,9 +1262,9 @@
 				<&mmcc DSI1_BYTE_CLK>,
 				<&mmcc DSI_PIXEL_CLK>,
 				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
-					"src_clk", "byte_clk", "pixel_clk",
-					"core_clk";
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
 
 			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
 					<&mmcc DSI1_ESC_SRC>,
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 7bcf5ef92157..4139d3817bd6 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -980,8 +980,9 @@
 			clocks = <&gcc GMAC_CORE1_CLK>;
 			clock-names = "stmmaceth";
 
-			resets = <&gcc GMAC_CORE1_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&gcc GMAC_CORE1_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
 
 			status = "disabled";
 		};
@@ -1003,8 +1004,9 @@
 			clocks = <&gcc GMAC_CORE2_CLK>;
 			clock-names = "stmmaceth";
 
-			resets = <&gcc GMAC_CORE2_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&gcc GMAC_CORE2_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
 
 			status = "disabled";
 		};
@@ -1026,8 +1028,9 @@
 			clocks = <&gcc GMAC_CORE3_CLK>;
 			clock-names = "stmmaceth";
 
-			resets = <&gcc GMAC_CORE3_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&gcc GMAC_CORE3_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
 
 			status = "disabled";
 		};
@@ -1049,8 +1052,9 @@
 			clocks = <&gcc GMAC_CORE4_CLK>;
 			clock-names = "stmmaceth";
 
-			resets = <&gcc GMAC_CORE4_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&gcc GMAC_CORE4_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
 
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
new file mode 100644
index 000000000000..d159188c8b95
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "qcom-msm8226.dtsi"
+
+/ {
+	model = "Samsung Galaxy S III Neo";
+	compatible = "samsung,s3ve3g", "qcom,msm8226";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&soc {
+	serial@f991f000 {
+		status = "ok";
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
new file mode 100644
index 000000000000..2de69d56870d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen { };
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8226";
+			reg = <0xfc400000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8226-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 117>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		blsp1_uart3: serial@f991f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991f000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		timer@f9020000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index d737de7173cf..003f0fa9c857 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -315,6 +315,10 @@
 	};
 
 	/delete-node/ vreg-boost;
+
+	adsp-pil {
+		cx-supply = <&pma8084_s2>;
+	};
 };
 
 &soc {
@@ -831,6 +835,13 @@
 			vddio-supply = <&pma8084_l12>;
 		};
 	};
+
+	remoteproc@fc880000 {
+		cx-supply = <&pma8084_s2>;
+		mss-supply = <&pma8084_s6>;
+		mx-supply = <&pma8084_s1>;
+		pll-supply = <&pma8084_l12>;
+	};
 };
 
 &spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
index f4ec08f13003..b4dd85bd4faf 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
@@ -11,6 +11,7 @@
 
 	aliases {
 		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart7;
 	};
 
 	chosen {
@@ -336,6 +337,27 @@
 		pinctrl-0 = <&blsp1_uart2_pin_a>;
 	};
 
+	serial@f995d000 {
+		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp2_uart7_pin_a>;
+
+		bluetooth {
+			compatible = "brcm,bcm43438-bt";
+			max-speed = <3000000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&bt_host_wake_pin>,
+				    <&bt_dev_wake_pin>,
+				    <&bt_reg_on_pin>;
+
+			host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>;
+			device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	usb@f9a55000 {
 		status = "okay";
 
@@ -380,6 +402,40 @@
 			};
 		};
 
+		blsp2_uart7_pin_a: blsp2-uart7-pin-active {
+			tx {
+				pins = "gpio41";
+				function = "blsp_uart7";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio42";
+				function = "blsp_uart7";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cts {
+				pins = "gpio43";
+				function = "blsp_uart7";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			rts {
+				pins = "gpio44";
+				function = "blsp_uart7";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		i2c8_pins: i2c8 {
 			mux {
 				pins = "gpio47", "gpio48";
@@ -479,6 +535,23 @@
 				input-enable;
 			};
 		};
+
+		bt_host_wake_pin: bt-host-wake {
+			pins = "gpio95";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+
+		bt_dev_wake_pin: bt-dev-wake {
+			pins = "gpio96";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
 	};
 
 	i2c@f9964000 {
@@ -606,6 +679,14 @@
 				power-source = <PM8941_GPIO_S3>;
 			};
 
+			bt_reg_on_pin: bt-reg-on {
+				pins = "gpio16";
+				function = "normal";
+
+				output-low;
+				power-source = <PM8941_GPIO_S3>;
+			};
+
 			wlan_sleep_clk_pin: wl-sleep-clk {
 				pins = "gpio17";
 				function = "func2";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index db4c06bf7888..78ec496d5bc3 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -715,6 +715,15 @@
 			status = "disabled";
 		};
 
+		blsp2_uart7: serial@f995d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995d000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp2_uart8: serial@f995e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995e000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 0057c7c04d31..1e6ce035f76a 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -143,7 +143,7 @@
 			reg = <0x8ff00000 0x100000>;
 		};
 
-		tz_apps_mem: memory@0x90000000 {
+		tz_apps_mem: memory@90000000 {
 			no-map;
 			reg = <0x90000000 0x500000>;
 		};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 45cf75b5824c..b07b71307f24 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -608,6 +608,8 @@
 				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
 			clock-frequency = <100000>;
 			power-domains = <&cpg_clocks>;
@@ -627,6 +629,8 @@
 				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
 			clock-frequency = <100000>;
 			power-domains = <&cpg_clocks>;
@@ -646,6 +650,8 @@
 				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
 			clock-frequency = <100000>;
 			power-domains = <&cpg_clocks>;
@@ -665,6 +671,8 @@
 				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
 			clock-frequency = <100000>;
 			power-domains = <&cpg_clocks>;
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index 85c0399b1339..fdeb0bc12cb7 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -236,6 +236,8 @@
 				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD 87>;
 			power-domains = <&cpg>;
 			clock-frequency = <100000>;
@@ -255,6 +257,8 @@
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD 86>;
 			power-domains = <&cpg>;
 			clock-frequency = <100000>;
@@ -274,6 +278,8 @@
 				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD 85>;
 			power-domains = <&cpg>;
 			clock-frequency = <100000>;
@@ -293,6 +299,8 @@
 				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD 84>;
 			power-domains = <&cpg>;
 			clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index e5fb1ce261f7..c39066967053 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -72,50 +72,6 @@
 		power-domains = <&pd_a3bc>;
 	};
 
-	dmac: dma-multiplexer {
-		compatible = "renesas,shdma-mux";
-		#dma-cells = <1>;
-		dma-channels = <20>;
-		dma-requests = <256>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dma0: dma-controller@e6700020 {
-			compatible = "renesas,shdma-r8a73a4";
-			reg = <0 0xe6700020 0 0x89e0>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					"ch0", "ch1", "ch2", "ch3",
-					"ch4", "ch5", "ch6", "ch7",
-					"ch8", "ch9", "ch10", "ch11",
-					"ch12", "ch13", "ch14", "ch15",
-					"ch16", "ch17", "ch18", "ch19";
-			clocks = <&mstp2_clks R8A73A4_CLK_DMAC>;
-			power-domains = <&pd_a3sp>;
-		};
-	};
-
 	i2c5: i2c@e60b0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index a2279686ffcc..420e0b3259d4 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -602,7 +602,9 @@
 		iic3: i2c@e60b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7742";
+			compatible = "renesas,iic-r8a7742",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
 			reg = <0 0xe60b0000 0 0x425>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 926>;
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 7e5e09d210ec..3502b5dcc04f 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -552,7 +552,9 @@
 			/* doesn't need pinmux */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7743";
+			compatible = "renesas,iic-r8a7743",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
 			reg = <0 0xe60b0000 0 0x425>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 926>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 8419683a9d83..f5d4b8b85b6d 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -552,7 +552,9 @@
 			/* doesn't need pinmux */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7744";
+			compatible = "renesas,iic-r8a7744",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
 			reg = <0 0xe60b0000 0 0x425>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 926>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index f5a665b5d209..ae4055428c5e 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -218,7 +218,7 @@
 	};
 
 	timer2: timer@2000e000 {
-		compatible = "snps,dw-apb-timer-osc";
+		compatible = "snps,dw-apb-timer";
 		reg = <0x2000e000 0x100>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
@@ -239,7 +239,7 @@
 	};
 
 	timer0: timer@20038000 {
-		compatible = "snps,dw-apb-timer-osc";
+		compatible = "snps,dw-apb-timer";
 		reg = <0x20038000 0x100>;
 		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
@@ -247,7 +247,7 @@
 	};
 
 	timer1: timer@2003a000 {
-		compatible = "snps,dw-apb-timer-osc";
+		compatible = "snps,dw-apb-timer";
 		reg = <0x2003a000 0x100>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
@@ -351,11 +351,11 @@
 			#interrupt-cells = <2>;
 		};
 
-		pcfg_pull_default: pcfg_pull_default {
+		pcfg_pull_default: pcfg-pull-default {
 			bias-pull-pin-default;
 		};
 
-		pcfg_pull_none: pcfg_pull_none {
+		pcfg_pull_none: pcfg-pull-none {
 			bias-disable;
 		};
 
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 793a1b9117fe..2c606494b78c 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -275,15 +275,15 @@
 			#interrupt-cells = <2>;
 		};
 
-		pcfg_pull_up: pcfg_pull_up {
+		pcfg_pull_up: pcfg-pull-up {
 			bias-pull-up;
 		};
 
-		pcfg_pull_down: pcfg_pull_down {
+		pcfg_pull_down: pcfg-pull-down {
 			bias-pull-down;
 		};
 
-		pcfg_pull_none: pcfg_pull_none {
+		pcfg_pull_none: pcfg-pull-none {
 			bias-disable;
 		};
 
@@ -638,9 +638,14 @@
 	power-domains = <&power RK3188_PD_GPU>;
 };
 
-&grf{
+&grf {
 	compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
 
+	io_domains: io-domains {
+		compatible = "rockchip,rk3188-io-voltage-domain";
+		status = "disabled";
+	};
+
 	usbphy: usbphy {
 		compatible = "rockchip,rk3188-usb-phy",
 			     "rockchip,rk3288-usb-phy";
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 9c5a7791a1ab..4dcdcf17c977 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -987,7 +987,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff900800 0x0 0x40>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -998,7 +997,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "isp_mmu";
 		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -1059,7 +1057,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff930300 0x0 0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vopb_mmu";
 		clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
 		clock-names = "aclk", "iface";
 		power-domains = <&power RK3288_PD_VIO>;
@@ -1109,7 +1106,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff940300 0x0 0x100>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vopl_mmu";
 		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
 		clock-names = "aclk", "iface";
 		power-domains = <&power RK3288_PD_VIO>;
@@ -1252,7 +1248,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff9a0800 0x0 0x100>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -1263,7 +1258,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>;
 		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hevc_mmu";
 		clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 9bd0acf3b708..24d56849af46 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -265,6 +265,11 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		io_domains: io-domains {
+			compatible = "rockchip,rv1108-io-voltage-domain";
+			status = "disabled";
+		};
+
 		u2phy: usb2phy@100 {
 			compatible = "rockchip,rv1108-usb2phy";
 			reg = <0x100 0x0c>;
@@ -434,8 +439,13 @@
 	};
 
 	pmugrf: syscon@20060000 {
-		compatible = "rockchip,rv1108-pmugrf", "syscon";
+		compatible = "rockchip,rv1108-pmugrf", "syscon", "simple-mfd";
 		reg = <0x20060000 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rv1108-pmu-io-voltage-domain";
+			status = "disabled";
+		};
 	};
 
 	usbgrf: syscon@202a0000 {
@@ -536,6 +546,17 @@
 		status = "disabled";
 	};
 
+	sfc: spi@301c0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x301c0000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
 	gmac: eth@30200000 {
 		compatible = "rockchip,rv1108-gmac";
 		reg = <0x30200000 0x10000>;
@@ -704,6 +725,32 @@
 			};
 		};
 
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<2 RK_PA0 3 &pcfg_pull_none>,
+					<2 RK_PA1 3 &pcfg_pull_none>,
+					<2 RK_PA2 3 &pcfg_pull_none>,
+					<2 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<2 RK_PA0 3 &pcfg_pull_none>,
+					<2 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<2 RK_PB4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none>;
+			};
+		};
+
 		gmac {
 			rmii_pins: rmii-pins {
 				rockchip,pins =	<1 RK_PC5 2 &pcfg_pull_none>,
diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h
new file mode 100644
index 000000000000..22fe9e522a97
--- /dev/null
+++ b/arch/arm/boot/dts/sama7g5-pinfunc.h
@@ -0,0 +1,923 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__CANTX3			PINMUX_PIN(PIN_PA0, 3, 1)
+#define PIN_PA0__PWML0			PINMUX_PIN(PIN_PA0, 5, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__CANRX3			PINMUX_PIN(PIN_PA1, 3, 1)
+#define PIN_PA1__D14			PINMUX_PIN(PIN_PA1, 4, 1)
+#define PIN_PA1__PWMH0			PINMUX_PIN(PIN_PA1, 5, 3)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__PDMC1_CLK		PINMUX_PIN(PIN_PA2, 3, 1)
+#define PIN_PA2__D15			PINMUX_PIN(PIN_PA2, 4, 1)
+#define PIN_PA2__PWMH1			PINMUX_PIN(PIN_PA2, 5, 3)
+#define PIN_PA2__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA2, 6, 3)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__PDMC1_DS0		PINMUX_PIN(PIN_PA3, 3, 1)
+#define PIN_PA3__NWR1_NBS1		PINMUX_PIN(PIN_PA3, 4, 1)
+#define PIN_PA3__PWML3			PINMUX_PIN(PIN_PA3, 5, 3)
+#define PIN_PA3__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA3, 6, 3)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__PDMC1_DS1		PINMUX_PIN(PIN_PA4, 3, 1)
+#define PIN_PA4__NCS2			PINMUX_PIN(PIN_PA4, 4, 1)
+#define PIN_PA4__PWMH3			PINMUX_PIN(PIN_PA4, 5, 3)
+#define PIN_PA4__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA4, 6, 3)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT2		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__CANTX2			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__A23			PINMUX_PIN(PIN_PA5, 4, 1)
+#define PIN_PA5__PWMEXTRG0		PINMUX_PIN(PIN_PA5, 5, 3)
+#define PIN_PA5__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA5, 6, 3)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT3		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__CANRX2			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__A24			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__PWMEXTRG1		PINMUX_PIN(PIN_PA6, 5, 3)
+#define PIN_PA6__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA6, 6, 3)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT4		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__CANTX1			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__NWAIT			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__PWMFI0			PINMUX_PIN(PIN_PA7, 5, 3)
+#define PIN_PA7__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA7, 6, 3)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT5		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__CANRX1			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__NCS0			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__PWMIF1			PINMUX_PIN(PIN_PA8, 5, 3)
+#define PIN_PA8__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA8, 6, 3)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT6		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__CANTX0			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__SMCK			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__SPDIF_RX		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA9, 6, 3)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT7		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__CANRX0		PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__NCS1			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__SPDIF_TX		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA10, 6, 3)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__A0_NBS0		PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__TIOA0			PINMUX_PIN(PIN_PA11, 5, 1)
+#define PIN_PA11__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA11, 6, 3)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__FLEXCOM3_IO5		PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__PWML2			PINMUX_PIN(PIN_PA12, 5, 3)
+#define PIN_PA12__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA12, 6, 3)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__FLEXCOM3_IO6		PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__PWMH2			PINMUX_PIN(PIN_PA13, 5, 3)
+#define PIN_PA13__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA13, 6, 3)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SDMMC0_CD		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__A25			PINMUX_PIN(PIN_PA14, 4, 1)
+#define PIN_PA14__PWML1			PINMUX_PIN(PIN_PA14, 5, 3)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__G0_TXEN		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__ISC_MCK		PINMUX_PIN(PIN_PA15, 3, 1)
+#define PIN_PA15__A1			PINMUX_PIN(PIN_PA15, 4, 1)
+#define PIN_PA15__TIOB0			PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__G0_TX0		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__ISC_D0		PINMUX_PIN(PIN_PA16, 3, 1)
+#define PIN_PA16__A2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__TCLK0			PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__G0_TX1		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__ISC_D1		PINMUX_PIN(PIN_PA17, 3, 1)
+#define PIN_PA17__A3			PINMUX_PIN(PIN_PA17, 4, 1)
+#define PIN_PA17__TIOA1			PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__G0_RXDV		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__ISC_D2		PINMUX_PIN(PIN_PA18, 3, 1)
+#define PIN_PA18__A4			PINMUX_PIN(PIN_PA18, 4, 1)
+#define PIN_PA18__TIOB1			PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__G0_RX0		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__ISC_D3		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__A5			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__TCLK1			PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__G0_RX1		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA20, 2, 1)
+#define PIN_PA20__ISC_D4		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__A6			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__TIOA2			PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__G0_RXER		PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA21, 2, 1)
+#define PIN_PA21__ISC_D5		PINMUX_PIN(PIN_PA21, 3, 1)
+#define PIN_PA21__A7			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__TIOB2			PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__G0_MDC		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__ISC_D6		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__A8			PINMUX_PIN(PIN_PA22, 4, 1)
+#define PIN_PA22__TCLK2			PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__G0_MDIO		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__ISC_D7		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__A9			PINMUX_PIN(PIN_PA23, 4, 1)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__G0_TXCK		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__ISC_HSYNC		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__A10			PINMUX_PIN(PIN_PA24, 4, 1)
+#define PIN_PA24__FLEXCOM0_IO5		PINMUX_PIN(PIN_PA24, 5, 1)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_125CK		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM5_IO4		PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__ISC_VSYNC		PINMUX_PIN(PIN_PA25, 3, 1)
+#define PIN_PA25__A11			PINMUX_PIN(PIN_PA25, 4, 1)
+#define PIN_PA25__FLEXCOM0_IO6		PINMUX_PIN(PIN_PA25, 5, 1)
+#define PIN_PA25__FLEXCOM7_IO0		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX2		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM5_IO2		PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__ISC_FIELD		PINMUX_PIN(PIN_PA26, 3, 1)
+#define PIN_PA26__A12			PINMUX_PIN(PIN_PA26, 4, 1)
+#define PIN_PA26__TF0			PINMUX_PIN(PIN_PA26, 5, 1)
+#define PIN_PA26__FLEXCOM7_IO1		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX3		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM5_IO3		PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__ISC_PCK		PINMUX_PIN(PIN_PA27, 3, 1)
+#define PIN_PA27__A13			PINMUX_PIN(PIN_PA27, 4, 1)
+#define PIN_PA27__TK0			PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RX2		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__ISC_D8		PINMUX_PIN(PIN_PA28, 3, 1)
+#define PIN_PA28__A14			PINMUX_PIN(PIN_PA28, 4, 1)
+#define PIN_PA28__RD0			PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA28, 6, 3)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX3		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__ISC_D9		PINMUX_PIN(PIN_PA29, 3, 1)
+#define PIN_PA29__A15			PINMUX_PIN(PIN_PA29, 4, 1)
+#define PIN_PA29__RF0			PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__FLEXCOM9_IO0		PINMUX_PIN(PIN_PA29, 6, 3)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RXCK		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__ISC_D10		PINMUX_PIN(PIN_PA30, 3, 1)
+#define PIN_PA30__A16			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__RK0			PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__FLEXCOM9_IO1		PINMUX_PIN(PIN_PA30, 6, 3)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_TXER		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__ISC_D11		PINMUX_PIN(PIN_PA31, 3, 1)
+#define PIN_PA31__A17			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__TD0			PINMUX_PIN(PIN_PA31, 5, 1)
+#define PIN_PA31__FLEXCOM10_IO0		PINMUX_PIN(PIN_PA31, 6, 3)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_COL			PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+#define PIN_PB0__EXT_IRQ0		PINMUX_PIN(PIN_PB0, 3, 1)
+#define PIN_PB0__A18			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB0__SPDIF_RX		PINMUX_PIN(PIN_PB0, 5, 2)
+#define PIN_PB0__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB0, 6, 3)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_CRS			PINMUX_PIN(PIN_PB1, 1, 1)
+#define PIN_PB1__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB1, 2, 2)
+#define PIN_PB1__EXT_IRQ1		PINMUX_PIN(PIN_PB1, 3, 1)
+#define PIN_PB1__A19			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__SPDIF_TX		PINMUX_PIN(PIN_PB1, 5, 2)
+#define PIN_PB1__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB1, 6, 3)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_TSUCOMP		PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
+#define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__PCK2			PINMUX_PIN(PIN_PB3, 3, 2)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__TF1			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__PCK3			PINMUX_PIN(PIN_PB4, 3, 2)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 4, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TK1			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM11_IO2		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PCK4			PINMUX_PIN(PIN_PB5, 3, 2)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 4, 1)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__RK1			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM11_IO3		PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PCK5			PINMUX_PIN(PIN_PB6, 3, 2)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 4, 1)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TD1			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM11_IO4		PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__FLEXCOM3_IO5		PINMUX_PIN(PIN_PB7, 3, 2)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 4, 1)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__RD1			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM3_IO6		PINMUX_PIN(PIN_PB8, 3, 2)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 4, 1)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO3		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PDMC0_CLK		PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__NCS3_NANDCS		PINMUX_PIN(PIN_PB9, 4, 1)
+#define PIN_PB9__PWML0			PINMUX_PIN(PIN_PB9, 5, 2)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO2		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PDMC0_DS0		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PB10, 4, 1)
+#define PIN_PB10__PWMH0			PINMUX_PIN(PIN_PB10, 5, 2)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO1		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__PDMC0_DS1		PINMUX_PIN(PIN_PB11, 3, 1)
+#define PIN_PB11__NRD_NANDOE		PINMUX_PIN(PIN_PB11, 4, 1)
+#define PIN_PB11__PWML1			PINMUX_PIN(PIN_PB11, 5, 2)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_IO0		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__FLEXCOM6_IO5		PINMUX_PIN(PIN_PB12, 3, 1)
+#define PIN_PB12__A21_NANDALE		PINMUX_PIN(PIN_PB12, 4, 1)
+#define PIN_PB12__PWMH1			PINMUX_PIN(PIN_PB12, 5, 2)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_CS		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM9_IO0		PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__FLEXCOM6_IO6		PINMUX_PIN(PIN_PB13, 3, 1)
+#define PIN_PB13__A22_NANDCLE		PINMUX_PIN(PIN_PB13, 4, 1)
+#define PIN_PB13__PWML2			PINMUX_PIN(PIN_PB13, 5, 2)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCK		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__FLEXCOM9_IO1		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__D0			PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH2			PINMUX_PIN(PIN_PB14, 5, 2)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_SCKN		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__FLEXCOM9_IO2		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__D1			PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML3			PINMUX_PIN(PIN_PB15, 5, 2)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO4		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__FLEXCOM9_IO3		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__PCK0			PINMUX_PIN(PIN_PB16, 3, 1)
+#define PIN_PB16__D2			PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH3			PINMUX_PIN(PIN_PB16, 5, 2)
+#define PIN_PB16__EXT_IRQ0		PINMUX_PIN(PIN_PB16, 6, 2)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO5		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__FLEXCOM9_IO4		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__PCK1			PINMUX_PIN(PIN_PB17, 3, 1)
+#define PIN_PB17__D3			PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWMEXTRG0		PINMUX_PIN(PIN_PB17, 5, 2)
+#define PIN_PB17__EXT_IRQ1		PINMUX_PIN(PIN_PB17, 6, 2)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO6		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__PCK2			PINMUX_PIN(PIN_PB18, 3, 1)
+#define PIN_PB18__D4			PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMEXTRG1		PINMUX_PIN(PIN_PB18, 5, 2)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_IO7		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__PCK3			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__D5			PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWMFI0		PINMUX_PIN(PIN_PB19, 5, 2)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_DQS		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__D6			PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMFI1		PINMUX_PIN(PIN_PB20, 5, 2)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__QSPI0_INT		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__D7			PINMUX_PIN(PIN_PB21, 4, 1)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__QSPI1_IO3		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__FLEXCOM9_IO6		PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__NANDRDY		PINMUX_PIN(PIN_PB22, 4, 1)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__QSPI1_IO2		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__I2SMCC0_CK		PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__PCK4			PINMUX_PIN(PIN_PB23, 6, 1)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__QSPI1_IO1		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__I2SMCC0_WS		PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__PCK5			PINMUX_PIN(PIN_PB24, 6, 1)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__QSPI1_IO0		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM7_IO2		PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__PCK6			PINMUX_PIN(PIN_PB25, 6, 1)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__QSPI1_CS		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM7_IO3		PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PWMEXTRG0		PINMUX_PIN(PIN_PB26, 5, 1)
+#define PIN_PB26__PCK7			PINMUX_PIN(PIN_PB26, 6, 1)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__QSPI1_SCK		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM7_IO4		PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__I2SMCC0_MCK		PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PWMEXTRG1		PINMUX_PIN(PIN_PB27, 5, 1)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_RSTN		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__ADTRG			PINMUX_PIN(PIN_PB28, 2, 2)
+#define PIN_PB28__PWMFI0		PINMUX_PIN(PIN_PB28, 5, 1)
+#define PIN_PB28__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB28, 6, 4)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CMD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB29, 2, 2)
+#define PIN_PB29__FLEXCOM0_IO5		PINMUX_PIN(PIN_PB29, 3, 2)
+#define PIN_PB29__TIOA3			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__PWMFI1		PINMUX_PIN(PIN_PB29, 5, 1)
+#define PIN_PB29__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB29, 6, 4)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_CK		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM0_IO6		PINMUX_PIN(PIN_PB30, 3, 2)
+#define PIN_PB30__TIOB3			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__PWMH0			PINMUX_PIN(PIN_PB30, 5, 1)
+#define PIN_PB30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB30, 6, 4)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__SDMMC1_DAT0		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB31, 2, 2)
+#define PIN_PB31__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB31, 3, 2)
+#define PIN_PB31__TCLK3			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__PWML0			PINMUX_PIN(PIN_PB31, 5, 1)
+#define PIN_PB31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB31, 6, 4)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__SDMMC1_DAT1		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC0, 2, 2)
+#define PIN_PC0__TIOA4			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__PWML1			PINMUX_PIN(PIN_PC0, 5, 1)
+#define PIN_PC0__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC0, 6, 4)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__SDMMC1_DAT2		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC1, 2, 2)
+#define PIN_PC1__TIOB4			PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__PWMH1			PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC1, 6, 4)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__SDMMC1_DAT3		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC2, 2, 2)
+#define PIN_PC2__TCLK4			PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__PWML2			PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC2, 6, 4)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SDMMC1_WP		PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC3, 2, 2)
+#define PIN_PC3__TIOA5			PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__PWMH2			PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC3, 6, 4)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SDMMC1_CD		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC4, 2, 2)
+#define PIN_PC4__FLEXCOM9_IO6		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__TIOB5			PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__PWML3			PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__FLEXCOM11_IO0		PINMUX_PIN(PIN_PC4, 6, 4)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC5, 2, 2)
+#define PIN_PC5__FLEXCOM6_IO5		PINMUX_PIN(PIN_PC5, 3, 2)
+#define PIN_PC5__TCLK5			PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__PWMH3			PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__FLEXCOM11_IO1		PINMUX_PIN(PIN_PC5, 6, 4)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__FLEXCOM4_IO4		PINMUX_PIN(PIN_PC6, 2, 2)
+#define PIN_PC6__FLEXCOM6_IO6		PINMUX_PIN(PIN_PC6, 3, 2)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC7, 2, 2)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__FLEXCOM7_IO2		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC9, 6, 4)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__FLEXCOM7_IO3		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC10, 6, 4)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC1_CK		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__FLEXCOM7_IO4		PINMUX_PIN(PIN_PC11, 2, 2)
+#define PIN_PC11__FLEXCOM2_IO0		PINMUX_PIN(PIN_PC11, 6, 4)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC1_WS		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC12, 2, 2)
+#define PIN_PC12__FLEXCOM2_IO1		PINMUX_PIN(PIN_PC12, 6, 4)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC1_MCK		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC13, 2, 2)
+#define PIN_PC13__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC13, 6, 4)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC14, 2, 2)
+#define PIN_PC14__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC14, 6, 4)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC15, 6, 4)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC16, 6, 4)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__EXT_IRQ0		PINMUX_PIN(PIN_PC17, 2, 3)
+#define PIN_PC17__FLEXCOM5_IO0		PINMUX_PIN(PIN_PC17, 6, 4)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC18, 2, 2)
+#define PIN_PC18__FLEXCOM5_IO1		PINMUX_PIN(PIN_PC18, 6, 4)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC1_DIN1		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC19, 2, 2)
+#define PIN_PC19__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC19, 6, 4)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC20, 2, 2)
+#define PIN_PC20__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC20, 6, 4)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC21, 2, 2)
+#define PIN_PC21__D3			PINMUX_PIN(PIN_PC21, 4, 2)
+#define PIN_PC21__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC21, 6, 5)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC22, 2, 2)
+#define PIN_PC22__D4			PINMUX_PIN(PIN_PC22, 4, 2)
+#define PIN_PC22__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC22, 6, 5)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC23, 1, 1)
+#define PIN_PC23__FLEXCOM0_IO5		PINMUX_PIN(PIN_PC23, 2, 3)
+#define PIN_PC23__D5			PINMUX_PIN(PIN_PC23, 4, 2)
+#define PIN_PC23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC23, 6, 5)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__FLEXCOM0_IO6		PINMUX_PIN(PIN_PC24, 2, 3)
+#define PIN_PC24__EXT_IRQ1		PINMUX_PIN(PIN_PC24, 3, 3)
+#define PIN_PC24__D6			PINMUX_PIN(PIN_PC24, 4, 2)
+#define PIN_PC24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC24, 6, 5)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__NTRST			PINMUX_PIN(PIN_PC25, 1, 1)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TCK_SWCLK		PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__TMS_SWDIO		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__TDI			PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__TDO			PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD0, 2, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD1, 2, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_RSTN		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__PCK0			PINMUX_PIN(PIN_PD2, 2, 2)
+#define PIN_PD2__CANTX4			PINMUX_PIN(PIN_PD2, 3, 1)
+#define PIN_PD2__D7			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__TIOA0			PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__FLEXCOM8_IO0		PINMUX_PIN(PIN_PD2, 6, 5)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_CMD		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__CANRX4			PINMUX_PIN(PIN_PD3, 3, 1)
+#define PIN_PD3__NANDRDY		PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__TIOB0			PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__FLEXCOM8_IO1		PINMUX_PIN(PIN_PD3, 6, 5)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__SDMMC2_CK		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD4, 2, 2)
+#define PIN_PD4__CANTX5			PINMUX_PIN(PIN_PD4, 3, 1)
+#define PIN_PD4__NCS3_NANDCS		PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__TCLK0			PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__FLEXCOM9_IO0		PINMUX_PIN(PIN_PD4, 6, 5)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__SDMMC2_DAT0		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PD5, 2, 2)
+#define PIN_PD5__CANRX5			PINMUX_PIN(PIN_PD5, 3, 1)
+#define PIN_PD5__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__TIOA1			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__FLEXCOM9_IO1		PINMUX_PIN(PIN_PD5, 6, 5)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__SDMMC2_DAT1		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PD6, 2, 2)
+#define PIN_PD6__SPDIF_RX		PINMUX_PIN(PIN_PD6, 3, 3)
+#define PIN_PD6__NRD_NANDOE		PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__TIOB1			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PD6, 6, 5)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__SDMMC2_DAT2		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__SPDIF_TX		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__A21_NANDALE		PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__TCLK1			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PD7, 6, 5)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__A11_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__SDMMC2_WP		PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__I2SMCC0_DIN1		PINMUX_PIN(PIN_PD9, 3, 2)
+#define PIN_PD9__D0			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__TIOB2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD9__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD9, 6, 5)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__SDMMC2_CD		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__PCK6			PINMUX_PIN(PIN_PD10, 2, 2)
+#define PIN_PD10__I2SMCC0_DIN2		PINMUX_PIN(PIN_PD10, 3, 2)
+#define PIN_PD10__D1			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__TCLK2			PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD10__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD10, 6, 3)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__PCK7			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__I2SMCC0_DIN3		PINMUX_PIN(PIN_PD11, 3, 2)
+#define PIN_PD11__D2			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__TIOA3			PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD11, 6, 3)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__PCK1			PINMUX_PIN(PIN_PD12, 1, 2)
+#define PIN_PD12__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__CANTX0		PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__TIOB3			PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__I2SMCC0_CK		PINMUX_PIN(PIN_PD13, 1, 2)
+#define PIN_PD13__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__PWML0			PINMUX_PIN(PIN_PD13, 3, 4)
+#define PIN_PD13__CANRX0		PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__TCLK3			PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__I2SMCC0_MCK		PINMUX_PIN(PIN_PD14, 1, 2)
+#define PIN_PD14__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__PWMH0			PINMUX_PIN(PIN_PD14, 3, 4)
+#define PIN_PD14__CANTX1		PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__TIOA4			PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD14, 6, 5)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__I2SMCC0_WS		PINMUX_PIN(PIN_PD15, 1, 2)
+#define PIN_PD15__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__PWML1			PINMUX_PIN(PIN_PD15, 3, 4)
+#define PIN_PD15__CANRX1		PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__TIOB4			PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD15, 6, 5)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PD16, 1, 2)
+#define PIN_PD16__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__PWMH1			PINMUX_PIN(PIN_PD16, 3, 4)
+#define PIN_PD16__CANTX2		PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__TCLK4			PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD16, 6, 5)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PD17, 1, 2)
+#define PIN_PD17__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD17, 2, 2)
+#define PIN_PD17__PWML2			PINMUX_PIN(PIN_PD17, 3, 4)
+#define PIN_PD17__CANRX2		PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__TIOA5			PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD17, 6, 5)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PD18, 1, 2)
+#define PIN_PD18__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD18, 2, 2)
+#define PIN_PD18__PWMH2			PINMUX_PIN(PIN_PD18, 3, 4)
+#define PIN_PD18__CANTX3		PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__TIOB5			PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD18, 6, 5)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PD19, 1, 2)
+#define PIN_PD19__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD19, 2, 2)
+#define PIN_PD19__PWML3			PINMUX_PIN(PIN_PD19, 3, 4)
+#define PIN_PD19__CANRX3		PINMUX_PIN(PIN_PD19, 4, 2)
+#define PIN_PD19__TCLK5			PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD19, 6, 5)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
+#define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__PCK1			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD21, 2, 2)
+#define PIN_PD21__CANRX4		PINMUX_PIN(PIN_PD21, 4, 2)
+#define PIN_PD21__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD21, 6, 5)
+#define PIN_PD21__G1_TXEN		PINMUX_PIN(PIN_PD21, 7, 1)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__PDMC0_CLK		PINMUX_PIN(PIN_PD22, 1, 2)
+#define PIN_PD22__PWMEXTRG0		PINMUX_PIN(PIN_PD22, 3, 4)
+#define PIN_PD22__RD1			PINMUX_PIN(PIN_PD22, 4, 2)
+#define PIN_PD22__CANTX5		PINMUX_PIN(PIN_PD22, 6, 2)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 7, 1)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__PDMC0_DS0		PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__PWMEXTRG1		PINMUX_PIN(PIN_PD23, 3, 4)
+#define PIN_PD23__RF1			PINMUX_PIN(PIN_PD23, 4, 2)
+#define PIN_PD23__ISC_MCK		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__CANRX5		PINMUX_PIN(PIN_PD23, 6, 2)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 7, 1)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__PWMFI0		PINMUX_PIN(PIN_PD24, 3, 4)
+#define PIN_PD24__RK1			PINMUX_PIN(PIN_PD24, 4, 2)
+#define PIN_PD24__ISC_D0		PINMUX_PIN(PIN_PD24, 5, 2)
+#define PIN_PD24__G1_RXDV		PINMUX_PIN(PIN_PD24, 7, 1)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__PDMC1_CLK		PINMUX_PIN(PIN_PD25, 1, 2)
+#define PIN_PD25__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD25, 2, 2)
+#define PIN_PD25__PWMFI1		PINMUX_PIN(PIN_PD25, 3, 4)
+#define PIN_PD25__TD1			PINMUX_PIN(PIN_PD25, 4, 2)
+#define PIN_PD25__ISC_D1		PINMUX_PIN(PIN_PD25, 5, 2)
+#define PIN_PD25__G1_RX0		PINMUX_PIN(PIN_PD25, 7, 1)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__PDMC1_DS0		PINMUX_PIN(PIN_PD26, 1, 2)
+#define PIN_PD26__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__ADTRG			PINMUX_PIN(PIN_PD26, 3, 3)
+#define PIN_PD26__TF1			PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__ISC_D2		PINMUX_PIN(PIN_PD26, 5, 2)
+#define PIN_PD26__G1_RX1		PINMUX_PIN(PIN_PD26, 7, 1)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__PDMC1_DS1		PINMUX_PIN(PIN_PD27, 1, 2)
+#define PIN_PD27__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__TIOA0			PINMUX_PIN(PIN_PD27, 3, 3)
+#define PIN_PD27__TK1			PINMUX_PIN(PIN_PD27, 4, 2)
+#define PIN_PD27__ISC_D3		PINMUX_PIN(PIN_PD27, 5, 2)
+#define PIN_PD27__G1_RXER		PINMUX_PIN(PIN_PD27, 7, 1)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__RD0			PINMUX_PIN(PIN_PD28, 1, 2)
+#define PIN_PD28__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__TIOB0			PINMUX_PIN(PIN_PD28, 3, 3)
+#define PIN_PD28__I2SMCC1_CK		PINMUX_PIN(PIN_PD28, 4, 2)
+#define PIN_PD28__ISC_D4		PINMUX_PIN(PIN_PD28, 5, 2)
+#define PIN_PD28__PWML3			PINMUX_PIN(PIN_PD28, 6, 5)
+#define PIN_PD28__G1_MDC		PINMUX_PIN(PIN_PD28, 7, 1)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__RF0			PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__TCLK0			PINMUX_PIN(PIN_PD29, 3, 3)
+#define PIN_PD29__I2SMCC1_WS		PINMUX_PIN(PIN_PD29, 4, 2)
+#define PIN_PD29__ISC_D5		PINMUX_PIN(PIN_PD29, 5, 2)
+#define PIN_PD29__PWMH3			PINMUX_PIN(PIN_PD29, 6, 5)
+#define PIN_PD29__G1_MDIO		PINMUX_PIN(PIN_PD29, 7, 1)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__RK0			PINMUX_PIN(PIN_PD30, 1, 2)
+#define PIN_PD30__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__TIOA1			PINMUX_PIN(PIN_PD30, 3, 3)
+#define PIN_PD30__I2SMCC1_MCK		PINMUX_PIN(PIN_PD30, 4, 2)
+#define PIN_PD30__ISC_D6		PINMUX_PIN(PIN_PD30, 5, 2)
+#define PIN_PD30__PWMEXTRG0		PINMUX_PIN(PIN_PD30, 6, 5)
+#define PIN_PD30__G1_TXCK		PINMUX_PIN(PIN_PD30, 7, 1)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__TD0			PINMUX_PIN(PIN_PD31, 1, 2)
+#define PIN_PD31__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__TIOB1			PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PD31, 4, 2)
+#define PIN_PD31__ISC_D7		PINMUX_PIN(PIN_PD31, 5, 2)
+#define PIN_PD31__PWM_EXTRG1		PINMUX_PIN(PIN_PD31, 6, 5)
+#define PIN_PD31__G1_TX2		PINMUX_PIN(PIN_PD31, 7, 1)
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__TF0			PINMUX_PIN(PIN_PE0, 1, 2)
+#define PIN_PE0__FLEXCOM6_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__TCLK1			PINMUX_PIN(PIN_PE0, 3, 3)
+#define PIN_PE0__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PE0, 4, 2)
+#define PIN_PE0__ISC_HSYNC		PINMUX_PIN(PIN_PE0, 5, 2)
+#define PIN_PE0__PWMFI0			PINMUX_PIN(PIN_PE0, 6, 5)
+#define PIN_PE0__G1_TX3			PINMUX_PIN(PIN_PE0, 7, 1)
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__TK0			PINMUX_PIN(PIN_PE1, 1, 2)
+#define PIN_PE1__FLEXCOM6_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__TIOA2			PINMUX_PIN(PIN_PE1, 3, 3)
+#define PIN_PE1__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PE1, 4, 2)
+#define PIN_PE1__ISC_VSYNC		PINMUX_PIN(PIN_PE1, 5, 2)
+#define PIN_PE1__PWMFI1			PINMUX_PIN(PIN_PE1, 6, 5)
+#define PIN_PE1__G1_RX2			PINMUX_PIN(PIN_PE1, 7, 1)
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__PWML0			PINMUX_PIN(PIN_PE2, 1, 5)
+#define PIN_PE2__FLEXCOM6_IO4		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__TIOB2			PINMUX_PIN(PIN_PE2, 3, 3)
+#define PIN_PE2__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PE2, 4, 2)
+#define PIN_PE2__ISC_FIELD		PINMUX_PIN(PIN_PE2, 5, 2)
+#define PIN_PE2__G1_RX3			PINMUX_PIN(PIN_PE2, 7, 1)
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__PWMH0			PINMUX_PIN(PIN_PE3, 1, 5)
+#define PIN_PE3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PE3, 2, 4)
+#define PIN_PE3__TCLK2			PINMUX_PIN(PIN_PE3, 3, 3)
+#define PIN_PE3__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE3, 4, 2)
+#define PIN_PE3__ISC_PCK		PINMUX_PIN(PIN_PE3, 5, 2)
+#define PIN_PE3__G1_RXCK		PINMUX_PIN(PIN_PE3, 7, 1)
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__PWML1			PINMUX_PIN(PIN_PE4, 1, 5)
+#define PIN_PE4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PE4, 2, 4)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 3, 3)
+#define PIN_PE4__I2SMCC1_DIN1		PINMUX_PIN(PIN_PE4, 4, 2)
+#define PIN_PE4__ISC_D8			PINMUX_PIN(PIN_PE4, 5, 2)
+#define PIN_PE4__G1_TXER		PINMUX_PIN(PIN_PE4, 7, 1)
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__PWMH1			PINMUX_PIN(PIN_PE5, 1, 5)
+#define PIN_PE5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PE5, 2, 4)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 3, 3)
+#define PIN_PE5__I2SMCC1_DIN2		PINMUX_PIN(PIN_PE5, 4, 2)
+#define PIN_PE5__ISC_D9			PINMUX_PIN(PIN_PE5, 5, 2)
+#define PIN_PE5__G1_COL			PINMUX_PIN(PIN_PE5, 7, 1)
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__PWML2			PINMUX_PIN(PIN_PE6, 1, 5)
+#define PIN_PE6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PE6, 2, 4)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 3, 3)
+#define PIN_PE6__I2SMCC1_DIN3		PINMUX_PIN(PIN_PE6, 4, 2)
+#define PIN_PE6__ISC_D10		PINMUX_PIN(PIN_PE6, 5, 2)
+#define PIN_PE6__G1_CRS			PINMUX_PIN(PIN_PE6, 7, 1)
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__PWMH2			PINMUX_PIN(PIN_PE7, 1, 5)
+#define PIN_PE7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PE7, 2, 4)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 3, 3)
+#define PIN_PE7__ISC_D11		PINMUX_PIN(PIN_PE7, 5, 2)
+#define PIN_PE7__G1_TSUCOMP		PINMUX_PIN(PIN_PE7, 7, 1)
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
new file mode 100644
index 000000000000..cc6be6db7b80
--- /dev/null
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
+ *
+ *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Microchip SAMA7G5 family SoC";
+	compatible = "microchip,sama7g5";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		usb_clk: usb_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+	};
+
+	vddout25: fixed-regulator-vddout25 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDOUT25";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		status = "disabled";
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x100000 0x20000>;
+		ranges;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		secumod: secumod@e0004000 {
+			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioA: pinctrl@e0014000 {
+			compatible = "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+		};
+
+		pmc: pmc@e0018000 {
+			compatible = "microchip,sama7g5-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		rtt: rtt@e001d020 {
+			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d020 0x30>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d050 {
+			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d050 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: gpbr@e001d060 {
+			compatible = "microchip,sama7g5-gpbr", "syscon";
+			reg = <0xe001d060 0x48>;
+		};
+
+		ps_wdt: watchdog@e001d180 {
+			compatible = "microchip,sama7g5-wdt";
+			reg = <0xe001d180 0x24>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		sdmmc0: mmc@e1204000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1204000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x4000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@e120c000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe120c000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		pwm: pwm@e1604000 {
+			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1604000 0x4000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#pwm-cells = <3>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
+			status = "disabled";
+		};
+
+		spdifrx: spdifrx@e1614000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdifrx";
+			reg = <0xe1614000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdiftx: spdiftx@e1618000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdiftx";
+			reg = <0xe1618000 0x4000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+			dma-names = "tx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+			clock-names = "pclk", "gclk";
+		};
+
+		i2s0: i2s@e161c000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe161c000 0x4000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		i2s1: i2s@e1620000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe1620000 0x4000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x4000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x4000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
+			clock-names = "pclk", "gclk";
+		};
+
+		flx0: flexcom@e1818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1818000 0x800>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e181c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe181c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe181c000 0x800>;
+			status = "disabled";
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+					<&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "rx", "tx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e1824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1824000 0x800>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
+					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e2010000 {
+			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
+			reg = <0xe2010000 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
+			status = "disabled";
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2018000 0x800>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2024000 0x800>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		gmac0: ethernet@e2800000 {
+			compatible = "microchip,sama7g5-gem";
+			reg = <0xe2800000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+			assigned-clock-rates = <125000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e2804000 {
+			compatible = "microchip,sama7g5-emac";
+			reg = <0xe2804000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		dma0: dma-controller@e2808000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe2808000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e280c000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe280c000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		/* Place dma2 here despite it's address */
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		flx8: flexcom@e2818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2818000 0x800>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
+					<&dma0 AT91_XDMAC_DT_PERID(22)>;
+				dma-names = "rx", "tx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e281c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe281c000 0x800>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
+					<&dma0 AT91_XDMAC_DT_PERID(24)>;
+				dma-names = "rx", "tx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx11: flexcom@e2824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2824000 0x800>;
+			status = "disabled";
+
+			spi11: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
+					    <&dma0 AT91_XDMAC_DT_PERID(28)>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupt-parent;
+			reg = <0xe8c11000 0x1000>,
+				<0xe8c12000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index d0fe3f9aa183..9baf927f9b95 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -58,46 +58,46 @@
 					#io-channel-cells = <1>;
 
 					/* GPADC channels */
-					bat_ctrl: channel@01 {
+					bat_ctrl: channel@1 {
 						reg = <0x01>;
 					};
-					btemp_ball: channel@02 {
+					btemp_ball: channel@2 {
 						reg = <0x02>;
 					};
-					main_charger_v: channel@03 {
+					main_charger_v: channel@3 {
 						reg = <0x03>;
 					};
-					acc_detect1: channel@04 {
+					acc_detect1: channel@4 {
 						reg = <0x04>;
 					};
-					acc_detect2: channel@05 {
+					acc_detect2: channel@5 {
 						reg = <0x05>;
 					};
-					adc_aux1: channel@06 {
+					adc_aux1: channel@6 {
 						reg = <0x06>;
 					};
-					adc_aux2: channel@07 {
+					adc_aux2: channel@7 {
 						reg = <0x07>;
 					};
-					main_batt_v: channel@08 {
+					main_batt_v: channel@8 {
 						reg = <0x08>;
 					};
-					vbus_v: channel@09 {
+					vbus_v: channel@9 {
 						reg = <0x09>;
 					};
-					main_charger_c: channel@0a {
+					main_charger_c: channel@a {
 						reg = <0x0a>;
 					};
-					usb_charger_c: channel@0b {
+					usb_charger_c: channel@b {
 						reg = <0x0b>;
 					};
-					bk_bat_v: channel@0c {
+					bk_bat_v: channel@c {
 						reg = <0x0c>;
 					};
-					die_temp: channel@0d {
+					die_temp: channel@d {
 						reg = <0x0d>;
 					};
-					usb_id: channel@0e {
+					usb_id: channel@e {
 						reg = <0x0e>;
 					};
 					xtal_temp: channel@12 {
@@ -217,7 +217,7 @@
 					battery		= <&ab8500_battery>;
 				};
 
-				ab8500_usb {
+				ab8500_usb: ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
 					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
 						     <96 IRQ_TYPE_LEVEL_HIGH>,
@@ -238,6 +238,7 @@
 					musb_1v8-supply = <&db8500_vsmps2_reg>;
 					clocks = <&prcmu_clk PRCMU_SYSCLK>;
 					clock-names = "sysclk";
+					#phy-cells = <0>;
 				};
 
 				ab8500-ponkey {
@@ -386,5 +387,10 @@
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};
+
+		usb_per5@a03e0000 {
+			phys = <&ab8500_usb>;
+			phy-names = "usb";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index 0defc15b9bbc..8d018701a680 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -54,40 +54,40 @@
 					#io-channel-cells = <1>;
 
 					/* GPADC channels */
-					bat_ctrl: channel@01 {
+					bat_ctrl: channel@1 {
 						reg = <0x01>;
 					};
-					btemp_ball: channel@02 {
+					btemp_ball: channel@2 {
 						reg = <0x02>;
 					};
-					acc_detect1: channel@04 {
+					acc_detect1: channel@4 {
 						reg = <0x04>;
 					};
-					acc_detect2: channel@05 {
+					acc_detect2: channel@5 {
 						reg = <0x05>;
 					};
-					adc_aux1: channel@06 {
+					adc_aux1: channel@6 {
 						reg = <0x06>;
 					};
-					adc_aux2: channel@07 {
+					adc_aux2: channel@7 {
 						reg = <0x07>;
 					};
-					main_batt_v: channel@08 {
+					main_batt_v: channel@8 {
 						reg = <0x08>;
 					};
-					vbus_v: channel@09 {
+					vbus_v: channel@9 {
 						reg = <0x09>;
 					};
-					charger_c: channel@0b {
+					charger_c: channel@b {
 						reg = <0x0b>;
 					};
-					bk_bat_v: channel@0c {
+					bk_bat_v: channel@c {
 						reg = <0x0c>;
 					};
-					die_temp: channel@0d {
+					die_temp: channel@d {
 						reg = <0x0d>;
 					};
-					usb_id: channel@0e {
+					usb_id: channel@e {
 						reg = <0x0e>;
 					};
 				};
@@ -201,6 +201,7 @@
 					musb_1v8-supply = <&db8500_vsmps2_reg>;
 					clocks = <&prcmu_clk PRCMU_SYSCLK>;
 					clock-names = "sysclk";
+					#phy-cells = <0>;
 				};
 
 				ab8500-ponkey {
@@ -322,5 +323,10 @@
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};
+
+		usb_per5@a03e0000 {
+			phys = <&ab8500_usb>;
+			phy-names = "usb";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi
index 344d29853bf7..f1ff3f4835d7 100644
--- a/arch/arm/boot/dts/ste-db8500.dtsi
+++ b/arch/arm/boot/dts/ste-db8500.dtsi
@@ -5,11 +5,10 @@
 / {
 	cpus {
 		cpu@300 {
-			/* cpufreq controls */
 			operating-points = <998400 0
-					    800000 0
-					    400000 0
-					    200000 0>;
+					    798720 0
+					    399360 0
+					    199680 0>;
 		};
 	};
 
@@ -19,19 +18,19 @@
 		ranges;
 
 		/* Modem trace memory */
-		ram@06000000 {
+		ram@6000000 {
 			reg = <0x06000000 0x00f00000>;
 			no-map;
 		};
 
 		/* Modem shared memory */
-		ram@06f00000 {
+		ram@6f00000 {
 			reg = <0x06f00000 0x00100000>;
 			no-map;
 		};
 
 		/* Modem private memory */
-		ram@07000000 {
+		ram@7000000 {
 			reg = <0x07000000 0x01000000>;
 			no-map;
 		};
diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi
index 287804e9e183..e4e8d5fc1f8a 100644
--- a/arch/arm/boot/dts/ste-db8520.dtsi
+++ b/arch/arm/boot/dts/ste-db8520.dtsi
@@ -5,11 +5,10 @@
 / {
 	cpus {
 		cpu@300 {
-			/* cpufreq controls */
 			operating-points = <1152000 0
-					    800000 0
-					    400000 0
-					    200000 0>;
+					    798720 0
+					    399360 0
+					    199680 0>;
 		};
 	};
 
@@ -19,19 +18,19 @@
 		ranges;
 
 		/* Modem trace memory */
-		ram@06000000 {
+		ram@6000000 {
 			reg = <0x06000000 0x00f00000>;
 			no-map;
 		};
 
 		/* Modem shared memory */
-		ram@06f00000 {
+		ram@6f00000 {
 			reg = <0x06f00000 0x00100000>;
 			no-map;
 		};
 
 		/* Modem private memory */
-		ram@07000000 {
+		ram@7000000 {
 			reg = <0x07000000 0x01000000>;
 			no-map;
 		};
diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/ste-db9500.dtsi
index 0afff703191c..4273d36e881d 100644
--- a/arch/arm/boot/dts/ste-db9500.dtsi
+++ b/arch/arm/boot/dts/ste-db9500.dtsi
@@ -5,11 +5,10 @@
 / {
 	cpus {
 		cpu@300 {
-			/* cpufreq controls */
-			operating-points = <1152000 0
-					    800000 0
-					    400000 0
-					    200000 0>;
+			operating-points = <998400 0
+					    798720 0
+					    399360 0
+					    199680 0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
index 7bf7a2d34cbc..31a86606beda 100644
--- a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
@@ -163,6 +163,24 @@
 	};
 
 	i2c2 {
+		i2c2_b_1_default: i2c2_b_1_default {
+			default_mux {
+				function = "i2c2";
+				groups = "i2c2_b_1";
+			};
+			default_cfg1 {
+				pins = "GPIO8_AD5", "GPIO9_AE4"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c2_b_1_sleep: i2c2_b_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO8_AD5", "GPIO9_AE4"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+
 		i2c2_b_2_default: i2c2_b_2_default {
 			default_mux {
 				function = "i2c2";
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index c97e8d29004f..961f2c7274ce 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -163,6 +163,8 @@
 			bus-width = <8>;
 			cap-mmc-highspeed;
 			non-removable;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&db8500_vsmps2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc2_a_1_default>;
@@ -178,6 +180,8 @@
 			bus-width = <8>;
 			cap-mmc-highspeed;
 			non-removable;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc4_a_1_default>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 40f1d7c9c1d4..934fc788fe1d 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -267,6 +267,8 @@
 		        max-frequency = <100000000>;
 			bus-width = <8>;
 			cap-mmc-highspeed;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc4_a_1_default>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
new file mode 100644
index 000000000000..952606e607ed
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -0,0 +1,863 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Ace 2 GT-I8160 also known as Codina.
+ *
+ * NOTE: this is the most common variant according to the vendor tree, known
+ * as "R0.0". There appears to be a "R0.4" variant with backlight on GPIO69,
+ * AB8505 and other changes. There is also talk about some variants having a
+ * Samsung S6D27A1 display, indicated by passing a different command line from
+ * the boot loader.
+ *
+ * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China).
+ * The GT-I8160 plain is knonw as the "europe" variant.
+ * The GT-I8160P appears to not use the ST Microelectronics accelerometer.
+ * The GT-I8160chn appears to be the same as the europe variant.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8500.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Ace 2 (GT-I8160)";
+	compatible = "samsung,codina", "st-ericsson,u8500";
+
+	cpus {
+		cpu@300 {
+			/*
+			 * This has a frequency cap at ~800 MHz in the firmware.
+			 * (Changing this number here will not overclock it.)
+			 */
+			operating-points = <798720 0
+					    399360 0
+					    199680 0>;
+		};
+	};
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VMEM_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh "TSP" regulator for the touchscreen.
+	 * One GPIO line controls two voltages of 3.3V and 1.8V
+	 * this line is known as "TSP_LDO_ON1" in the schematics.
+	 */
+	ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "LDO_TSP_A3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* GPIO94 controls this regulator */
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		/* 70 ms power-on delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_ldo_en_default_mode>;
+	};
+	ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_TSP_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO94 controls this regulator */
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		/* 70 ms power-on delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+	 * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+	 */
+	lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_3.0V";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 controls this regulator */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+	lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO219 controls this regulator too */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+
+	/*
+	 * This regulator is a GPIO line that drives the Broadcom WLAN
+	 * line WL_REG_ON high and enables the internal regulators
+	 * inside the chip. Unfortunatley it is erroneously named
+	 * WLAN_RST_N on the schematic but it is not a reset line.
+	 *
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the for the SDIO connector, the chip is actually connected
+	 * directly to VBAT.
+	 */
+	wl_reg: regulator-gpio-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WL_REG_ON";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <100000>;
+		/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_ldo_en_default>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		/* GPIO195 "MOT_EN" */
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default_mode>;
+		touchkey-led {
+			label = "touchkeys";
+			/*
+			 * GPIO194 on R0.0, R0.4 does not use this at all, it
+			 * will instead turn LDO AUX4 on/off for key led backlighy.
+			 * (Line is pulled down on R0.4)
+			 */
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	ktd253: backlight {
+		compatible = "kinetic,ktd253";
+		/*
+		 * GPIO68 is for R0.0, the board file talks about a TMO variant
+		 * (R0.4) using GPIO69.
+		 */
+		enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ktd253_backlight_default_mode>;
+	};
+
+	/* Richtek RT8515GQW Flash LED Driver IC */
+	flash {
+		compatible = "richtek,rt8515";
+		/* GPIO 140 */
+		enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		/* GPIO 141 */
+		ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		/*
+		 * RFS is 16 kOhm and RTS is 100 kOhm giving
+		 * the flash max current 343mA and torch max
+		 * current 55 mA.
+		 */
+		richtek,rfs-ohms = <16000>;
+		richtek,rts-ohms = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_flash_default_mode>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+			flash-max-microamp = <343750>;
+			led-max-microamp = <55000>;
+		};
+	};
+
+	/* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+			clock-frequency = <400000>;
+
+			avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+			dvdd-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+		};
+		/* TODO: this should also be used by the SM5103 Camera power management unit */
+	};
+
+	/* Bit-banged I2C on GPIO151 and GPIO152 also called "NFC I2C" */
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* TODO: add the NFC chip here */
+	};
+
+	spi-gpio-0 {
+		compatible = "spi-gpio";
+		/* Clock on GPIO220, pin SCL */
+		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+		/* MOSI on GPIO224, pin SDI "slave data in" */
+		mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		/* MISO on GPIO225, pin SDO "slave data out" */
+		miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		/* Chip select on GPIO201 */
+		cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * Some Codinas (90%) have a WideChips WS2401-based LMS380KF01
+		 * display mounted and some 10% has a Samsung S6D27A1 instead.
+		 * The boot loader needs to modify this compatible to
+		 * correspond to whatever is passed from the early Samsung boot.
+		 */
+		panel@0 {
+			compatible = "samsung,lms380kf01";
+			spi-max-frequency = <1200000>;
+			/* TYPE 3: inverse clock polarity and phase */
+			spi-cpha;
+			spi-cpol;
+
+			reg = <0>;
+			vci-supply = <&lcd_3v0_reg>;
+			vccio-supply = <&lcd_1v8_reg>;
+
+			/* Reset on GPIO139 */
+			reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+			/* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */
+			interrupt-parent = <&gpio2>;
+			interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_default_mode>;
+			backlight = <&ktd253>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	soc {
+		/* External Micro SD slot */
+		mmc@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			/* MMC is powered by AUX3 1.2V .. 2.91V */
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			/* 2.9 V level translator is using AUX3 at 2.9 V as well */
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			status = "okay";
+		};
+
+		/* WLAN SDIO channel */
+		mmc@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			/*
+			 * GPIO-controlled voltage enablement: this drives
+			 * the WL_REG_ON line high when we use this device.
+			 * Represented as regulator to fill OCR mask.
+			 */
+			vmmc-supply = <&wl_reg>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			wifi@1 {
+				/* Actually BRCM4330 */
+				compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		/* eMMC */
+		mmc@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			/*
+			 * GPIO130 will be set to input no pull-up resulting in a resistor
+			 * pulling the reset high and taking the memory out of reset.
+			 */
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* BT_WAKE on GPIO199 */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* BT_HOST_WAKE on GPIO97 */
+				/* FIXME: convert to interrupt */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				/* BT_RST_N on GPIO209 */
+				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPS UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			/* CTS/RTS is not used, CTS is repurposed as GPIO */
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
+			/* FIXME: add a device for the GPS here */
+		};
+
+		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8500 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8500-regulators {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "V-SENSORS-VDD";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Used for VIO for sensors */
+						regulator-name = "V-SENSORS-VIO";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "V-MMC-SD";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <2910000>;
+					};
+				};
+			};
+		};
+
+		/* I2C0 also known as "AGC I2C" */
+		i2c@80004000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			/* TODO: write bindings and driver for this proximity sensor */
+			proximity@39 {
+				/* Codina has the Mouser TMD2672 */
+				compatible = "mouser,tmd2672";
+				clock-frequency = <400000>;
+				reg = <0x39>;
+
+				/* IRQ on GPIO146 "PS_INT" */
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				/* FIXME: needs a VDDIO supply that is connected to a pull-up resistor */
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tms2672_codina_default>;
+			};
+		};
+
+		/* I2C1 on GPIO16 and GPIO17 also called "MUS I2C" */
+		i2c@80122000 {
+			status = "okay";
+			pinctrl-names = "default","sleep";
+			/* FIXME: If it doesn't work try what we use on Gavini */
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
+
+			/* Texas Instruments TSU6111 micro USB switch */
+			usb-switch@25 {
+				compatible = "ti,tsu6111";
+				reg = <0x25>;
+				/* Interrupt JACK_INT_N on GPIO95 */
+				interrupt-parent = <&gpio2>;
+				interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsu6111_codina_default>;
+			};
+		};
+
+		/* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
+		i2c@80128000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			lisd3dh@19 {
+				/* ST Microelectronics Accelerometer */
+				compatible = "st,lis3dh-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x19>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+				vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+				mount-matrix = "0", "-1", "0",
+					       "1", "0", "0",
+					       "0", "0", "1";
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* TODO: write bindings and driver for this touchscreen */
+
+			/* Zinitix BT404 ISP part */
+			isp@50 {
+				compatible = "zinitix,bt404-isp";
+				reg = <0x50>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+
+			/* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */
+			touchscreen@20 {
+				compatible = "zinitix,bt404";
+				reg = <0x20>;
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				vcca-supply = <&ldo_tsp_3v3_reg>;
+				vdd-supply = <&ldo_tsp_1v8_reg>;
+				zinitix,mode = <2>;
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dpi_default_mode>;
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0_A_2 default config to include
+	 * the card detect GPIO217 line.
+	 */
+	sdi0 {
+		mc0_a_2_default {
+			default_cfg4 {
+				pins = "GPIO217_AH12"; /* card detect */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	sdi2 {
+		/*
+		 * This will make the resistor mounted in R0.0 pull up
+		 * the reset line and take the eMMC out of reset. On
+		 * R0.4 variants, GPIO130 should be set in GPIO mode and
+		 * pulled down. (Not connected.)
+		 */
+		mc2_a_1_default {
+			default_cfg2 {
+				pins = "GPIO130_C8"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			codina_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			codina_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIOs for panel control */
+	panel {
+		panel_default_mode: panel_default {
+			codina_cfg1 {
+				/* Reset line */
+				pins = "GPIO139_C9";
+				ste,config = <&gpio_out_lo>;
+			};
+			codina_cfg2 {
+				/* ESD IRQ line "LCD detect" */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the touchscreen */
+	tsp-ldo {
+		tsp_ldo_en_default_mode: tsp_ldo_default {
+			/* LDO enable on GPIO94 */
+			gavini_cfg1 {
+				pins = "GPIO94_D7";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the LCD display */
+	lcd-ldo {
+		lcd_pwr_en_default_mode: lcd_pwr_en_default {
+			/* LCD_PWR_EN on GPIO219 */
+			codina_cfg1 {
+				pins = "GPIO219_AG10";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the key LED */
+	key-led {
+		gpio_leds_default_mode: en_led_ldo_default {
+			/* EN_LED_LDO on GPIO194 */
+			codina_cfg1 {
+				pins = "GPIO194_AF27";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the WLAN internal LDO regulators */
+	wlan-ldo {
+		wlan_ldo_en_default: wlan_ldo_default {
+			/* GPIO215 named WLAN_RST_N */
+			codina_cfg1 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Backlight GPIO */
+	backlight {
+		ktd253_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO68_E1"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Flash and torch */
+	flash {
+		gpio_flash_default_mode: flash_default {
+			codina_cfg1 {
+				pins = "GPIO140_B11", "GPIO141_C12";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6"; /* VOL DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for the Zinitix BT404 touchscreen */
+	tsp {
+		tsp_default: tsp_default {
+			codina_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor TMS2672 */
+	tms2672 {
+		tms2672_codina_default: tms2672_codina {
+			codina_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for subpmu */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			codina_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for the NFC */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			codina_cfg1 {
+				pins = "GPIO151_D17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based SPI bus for the display */
+	spi-gpio-0 {
+		spi_gpio_0_default: spi_gpio_0_d {
+			codina_cfg1 {
+				pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9";
+				ste,config = <&gpio_out_hi>;
+			};
+			codina_cfg2 {
+				pins = "GPIO225_AG8";
+				/* Needs pull down, no pull down resistor on board */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		spi_gpio_0_sleep: spi_gpio_0_s {
+			codina_cfg1 {
+				pins = "GPIO220_AH10", "GPIO201_AF24",
+				       "GPIO224_AG9", "GPIO225_AG8";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			/* GPIO216 for WL_HOST_WAKE */
+			codina_cfg2 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			/* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+			codina_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPIO97 BT_HOST_WAKE */
+			codina_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+			/* GPIO209 BT_RST_N */
+			codina_cfg3 {
+				pins = "GPIO209_AG15";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* Interrupt line for TI TSU6111 Micro USB switch */
+	tsu6111 {
+		tsu6111_codina_default: tsu6111_codina {
+			codina_cfg1 {
+				/* GPIO95 used for IRQ */
+				pins = "GPIO95_E8";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			codina_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	mcde {
+		dpi_default_mode: dpi_default {
+			default_mux1 {
+				/* Mux in all the data lines */
+				function = "lcd";
+				groups =
+					/* Data lines D0-D7 GPIO70..GPIO77 */
+					"lcd_d0_d7_a_1",
+					/* Data lines D8-D11 GPIO78..GPIO81 */
+					"lcd_d8_d11_a_1",
+					/* Data lines D12-D15 GPIO82..GPIO85 */
+					"lcd_d12_d15_a_1",
+					/* Data lines D16-D23 GPIO161..GPIO168 */
+					"lcd_d16_d23_b_1";
+			};
+			default_mux2 {
+				function = "lcda";
+				/* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+				groups = "lcdaclk_b_1", "lcda_b_1";
+			};
+			/* Input, no pull-up is the default state for pins used for an alt function */
+			default_cfg1 {
+				pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
new file mode 100644
index 000000000000..fabc390ccb0c
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -0,0 +1,854 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Beam GT-I8530 also known as Gavini.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8500.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Beam (GT-I8530)";
+	compatible = "samsung,gavini", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO193 EN */
+		gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VMEM_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>; // FIXME
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh "TSP" regulator for the touchscreen.
+	 * One GPIO line controls two voltages of 3.3V and 1.8V
+	 * this line is known as "TSP_LDO_ON1" in the schematics.
+	 */
+	ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "LDO_TSP_A3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* GPIO94 controls this regulator */
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		/* 70 ms power-on delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_ldo_en_default_mode>;
+	};
+	ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_TSP_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO94 controls this regulator */
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		/* 70 ms power-on delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+	 * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+	 */
+	lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 controls this regulator */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+	lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO219 controls this regulator too */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+
+	/*
+	 * This regulator is a GPIO line that drives the Broadcom WLAN
+	 * line WL_REG_ON high and enables the internal regulators
+	 * inside the chip. Unfortunatley it is erroneously named
+	 * WLAN_RST_N on the schematic but it is not a reset line.
+	 *
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the for the SDIO connector, the chip is actually connected
+	 * directly to VBAT.
+	 */
+	wl_reg: regulator-gpio-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WL_REG_ON";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <100000>;
+		/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_ldo_en_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-projector {
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			label = "Projector";
+			/* GPIO32 "Projector On HotKey" */
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* Richtek RT8515GQW Flash LED Driver IC */
+	flash {
+		compatible = "richtek,rt8515";
+		/* GPIO 140 */
+		enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		/* GPIO 141 */
+		ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		/*
+		 * RFS is 16 kOhm and RTS is 100 kOhm giving
+		 * the flash max current 343mA and torch max
+		 * current 55 mA.
+		 */
+		richtek,rfs-ohms = <16000>;
+		richtek,rts-ohms = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_flash_default_mode>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+			flash-max-microamp = <343750>;
+			led-max-microamp = <55000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default_mode>;
+		used-led {
+			label = "touchkeys";
+			/* GPIO68 */
+			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	ktd259: backlight {
+		compatible = "kinetic,ktd259";
+		/* GPIO20 */
+		enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ktd259_backlight_default_mode>;
+	};
+
+	/* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* TODO: Memsic MMC328 magnetometer */
+		magnetometer@30 {
+			compatible = "memsic,mmc328";
+			reg = <0x30>;
+			/* TODO: if you have the schematic, check if both voltages come from AUX2 */
+			/* VDA 1.8 V */
+			vda-supply = <&ab8500_ldo_aux2_reg>;
+			/* VDD 1.8V */
+			vdd-supply = <&ab8500_ldo_aux2_reg>;
+			/* GPIO204 */
+			reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc328_default>;
+		};
+		/* TODO: this should also be used by the NCP6914 Camera power management unit */
+	};
+
+	/*
+	 * TODO: See if we can use the PL023 for this instead.
+	 */
+	spi-gpio-0 {
+		compatible = "spi-gpio";
+		/* Clock on GPIO220, pin SCL */
+		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+		/* MOSI on GPIO224, pin SDI "slave data in" */
+		mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		/* MISO on GPIO225, pin SDO "slave data out" */
+		miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		/* Chip select on GPIO223 */
+		cs-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		panel@0 {
+			compatible = "samsung,lms397kf04";
+			/* 300 ns at read cycle -> 3 MHz max speed */
+			//spi-max-frequency = <3000000>;
+			spi-max-frequency = <1200000>;
+			/* TYPE 3: inverse clock polarity and phase */
+			spi-cpha;
+			spi-cpol;
+
+			reg = <0>;
+			vci-supply = <&lcd_3v0_reg>;
+			vccio-supply = <&lcd_1v8_reg>;
+			/* Reset on GPIO139 */
+			reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_default_mode>;
+			backlight = <&ktd259>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	/* Bit-banged I2C on GPIO201 and GPIO202 also called "MOT_I2C" */
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio6 10 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio6 9 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_2_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: add the Immersion ISA1200 I2C device here */
+	};
+
+	/* Bit-banged I2C on GPIO196 and GPIO197 also called "MPR_I2C" */
+	i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio6 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio6 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_3_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: add the DPP2601 projector I2C device 0x1b here */
+	};
+
+	soc {
+		/* External Micro SD slot */
+		mmc@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			/* MMC is powered by AUX3 1.2V .. 2.91V */
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			/* 2.9 V level translator */
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+			/* "flash detect" actually card detect */
+			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+
+		/* WLAN SDIO channel */
+		mmc@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			/*
+			 * GPIO-controlled voltage enablement: this drives
+			 * the WL_REG_ON line high when we use this device.
+			 * Represented as regulator to fill OCR mask.
+			 */
+			vmmc-supply = <&wl_reg>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			wifi@1 {
+				compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		/* eMMC */
+		mmc@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* BT_WAKE on GPIO199 */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* BT_HOST_WAKE on GPIO97 */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				/* BT_RST_N on GPIO209 */
+				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPS UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			/* CTS/RTS is not used, CTS is repurposed as GPIO */
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
+			/* FIXME: add a device for the GPS here */
+		};
+
+		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8500 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8500-regulators {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "V-SENSORS-VDD";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Used for VIO for sensors */
+						regulator-name = "V-SENSORS-VIO";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "V-MMC-SD";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <2910000>;
+					};
+				};
+			};
+		};
+
+		/* I2C0 */
+		i2c@80004000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			/* FIXME: fix the proximity sensor bindings and driver */
+			proximity@39 {
+				/* Gavini has the GP2A030S00F proximity sensor */
+				compatible = "sharp,gp2a030s00f";
+				clock-frequency = <400000>;
+				reg = <0x39>;
+				/* FIXME: GPIO146 provides power on, IR LED? */
+			};
+
+			gyroscope@68 {
+				compatible = "invensense,mpu3050";
+				reg = <0x68>;
+				/* GPIO226 interrupt */
+				interrupt-parent = <&gpio7>;
+				interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+				mount-matrix = "0", "1", "0",
+					       "1", "0", "0",
+					       "0", "0", "1";
+				vlogic-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+				pinctrl-names = "default";
+				pinctrl-0 = <&mpu3050_default>;
+
+				/*
+				 * The MPU-3050 acts as a hub for the
+				 * accelerometer.
+				 */
+				i2c-gate {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* Bosch BMA222E accelerometer */
+					accelerometer@18 {
+						compatible = "bosch,bma222e";
+						reg = <0x18>;
+						mount-matrix = "0", "1", "0",
+							       "-1", "0", "0",
+							       "0", "0", "1";
+						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+					};
+				};
+			};
+		};
+
+		/* I2C2 "AGC I2C" */
+		i2c@80128000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_1_default>;
+			pinctrl-1 = <&i2c2_b_1_sleep>;
+
+			/* Texas Instruments TSU6111 micro USB switch */
+			usb-switch@25 {
+				compatible = "ti,tsu6111";
+				reg = <0x25>;
+				/* Interrupt JACK_INT_N on GPIO95 */
+				interrupt-parent = <&gpio2>;
+				interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsu6111_default>;
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* Melfas MMS136 touchscreen */
+			touchscreen@48 {
+				compatible = "melfas,mms136";
+				reg = <0x48>;
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				/* AVDD is "analog supply", 2.57-3.47 V */
+				avdd-supply = <&ldo_tsp_3v3_reg>;
+				/* VDD is "digital supply" 1.71-3.47V */
+				vdd-supply = <&ldo_tsp_1v8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dpi_default_mode>;
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0_A_2 default config to include
+	 * the card detect GPIO217 line.
+	 */
+	sdi0 {
+		mc0_a_2_default {
+			default_cfg4 {
+				pins = "GPIO217_AH12"; /* card detect */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	mcde {
+		dpi_default_mode: dpi_default {
+			default_mux1 {
+				/* Mux in all the data lines */
+				function = "lcd";
+				groups =
+					/* Data lines D0-D7 GPIO70..GPIO77 */
+					"lcd_d0_d7_a_1",
+					/* Data lines D8-D11 GPIO78..GPIO81 */
+					"lcd_d8_d11_a_1",
+					/* Data lines D12-D15 GPIO82..GPIO85 */
+					"lcd_d12_d15_a_1",
+					/* Data lines D16-D23 GPIO161..GPIO168 */
+					"lcd_d16_d23_b_1";
+			};
+			default_mux2 {
+				function = "lcda";
+				/* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+				groups = "lcdaclk_b_1", "lcda_b_1";
+			};
+			/* Input, no pull-up is the default state for pins used for an alt function */
+			default_cfg1 {
+				pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+	/* GPIO for panel reset control */
+	panel {
+		panel_default_mode: panel_default {
+			gavini_cfg1 {
+				/* Reset line */
+				pins = "GPIO139_C9";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO6 */
+			gavini_cfg1 {
+				pins = "GPIO6_AF6";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the touchscreen */
+	tsp-ldo {
+		tsp_ldo_en_default_mode: tsp_ldo_default {
+			/* LDO enable on GPIO94 */
+			gavini_cfg1 {
+				pins = "GPIO94_D7";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* Flash and torch */
+	flash {
+		gpio_flash_default_mode: flash_default {
+			janice_cfg1 {
+				pins = "GPIO140_B11", "GPIO141_C12";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the key LED */
+	gpio-leds {
+		gpio_leds_default_mode: gpio_leds_default {
+			/* EN_LED_LDO on GPIO68 */
+			gavini_cfg1 {
+				pins = "GPIO68_E1";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	backlight {
+		ktd259_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO20_AB4"; /* LCD_BL_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the touchkeys */
+	touchkey-ldo {
+		tsp_ldo_on2_default_mode: tsp_ldo_on2_default {
+			/* TSP_LDO_ON2 on GPIO89 */
+			gavini_cfg1 {
+				pins = "GPIO89_E6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	touchkey {
+		touchkey_default_mode: touchkey_default {
+			gavini_cfg1 {
+				/* Interrupt */
+				pins = "GPIO198_AG25";
+				ste,config = <&gpio_in_nopull>;
+			};
+			gavini_cfg2 {
+				/* Reset, actually completely unused (not routed) */
+				pins = "GPIO205_AG23";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the LCD display */
+	lcd-ldo {
+		lcd_pwr_en_default_mode: lcd_pwr_en_default {
+			/* LCD_PWR_EN on GPIO219 */
+			gavini_cfg1 {
+				pins = "GPIO219_AG10";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the WLAN internal LDO regulators */
+	wlan-ldo {
+		wlan_ldo_en_default: wlan_ldo_default {
+			/* GPIO215 named WLAN_RST_N */
+			gavini_cfg1 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO193 */
+			skomer_cfg1 {
+				pins = "GPIO193_AH27";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO32_V2", /* Projector On HotKey */
+				       "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6"; /* VOL DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for the Atmel MXT228 touchscreen */
+	tsp {
+		tsp_default: tsp_default {
+			gavini_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* Reset line for the Memsic MMC328 magnetometer */
+	mmc328 {
+		mmc328_default: mmc328_gavini {
+			gavini_cfg1 {
+				pins = "GPIO204_AF23";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* Interrupt line for Invensense MPU3050 gyroscope */
+	mpu3050 {
+		mpu3050_default: mpu3050 {
+			gavini_cfg1 {
+				/* GPIO226 used for IRQ */
+				pins = "GPIO226_AF8";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for magnetometer and NCP6914 */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			gavini_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for the Immersion ISA1200 */
+	i2c-gpio-2 {
+		i2c_gpio_2_default: i2c_gpio_2 {
+			gavini_cfg1 {
+				pins = "GPIO201_AF24", "GPIO202_AF25";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for the TI DPP2601 */
+	i2c-gpio-3 {
+		i2c_gpio_3_default: i2c_gpio_3 {
+			gavini_cfg1 {
+				pins = "GPIO196_AG26", "GPIO197_AH24";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based SPI bus for the display */
+	spi-gpio-0 {
+		spi_gpio_0_default: spi_gpio_0_d {
+			gavini_cfg1 {
+				pins = "GPIO220_AH10", "GPIO223_AH9", "GPIO224_AG9";
+				ste,config = <&gpio_out_hi>;
+			};
+			gavini_cfg2 {
+				pins = "GPIO225_AG8";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+		spi_gpio_0_sleep: spi_gpio_0_s {
+			gavini_cfg1 {
+				pins = "GPIO220_AH10", "GPIO223_AH9",
+				     "GPIO224_AG9", "GPIO225_AG8";
+				ste,config = <&gpio_out_hi>;
+			};
+			gavini_cfg2 {
+				pins = "GPIO225_AG8";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			/* GPIO216 for WL_HOST_WAKE */
+			gavini_cfg2 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			/* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+			gavini_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPIO97 BT_HOST_WAKE */
+			gavini_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+			/* GPIO209 BT_RST_N */
+			gavini_cfg3 {
+				pins = "GPIO209_AG15";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* Interrupt line for TI TSU6111 Micro USB switch */
+	tsu6111 {
+		tsu6111_default: tsu6111 {
+			gavini_cfg1 {
+				/* GPIO95 used for IRQ */
+				pins = "GPIO95_E8";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 40df7c61bf69..ee6379ab688c 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -145,6 +145,8 @@
 			non-removable;
 			cap-mmc-highspeed;
 			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
 
 			vmmc-supply = <&vmem_3v3>;
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 25af066f6f3a..f14cf316a70a 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -420,6 +420,8 @@
 			non-removable;
 			cap-mmc-highspeed;
 			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&ldo_3v3_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc2_a_1_default>;
@@ -580,7 +582,7 @@
 					#size-cells = <0>;
 
 					/* Bosch BMA222 accelerometer */
-					accelerometer@08 {
+					accelerometer@8 {
 						compatible = "bosch,bma222";
 						reg = <0x08>;
 						mount-matrix = "0", "1", "0",
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
new file mode 100644
index 000000000000..3b825666d302
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Amp SGH-I407 also known as Kyle.
+ *
+ * The code also refers to "Kyle AT&T" reflecting that this mobile phone
+ * was customized for the AT&T subsidiary Aio Wireless (All In One) and
+ * offered by the company in 2013.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Amp (SGH-I407)";
+	compatible = "samsung,kyle", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+	 * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+	 */
+	lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 controls this regulator */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+	lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO219 controls this regulator too */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+
+	wlan_en: regulator-gpio-wlan-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <200000>;
+		/* GPIO215 WLAN_EN */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default_mode>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ktd253: backlight {
+		compatible = "kinetic,ktd253";
+		/* GPIO 69 */
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_backlight_default_mode>;
+	};
+
+	/* Richtek RT8515GQW Flash LED Driver IC */
+	flash {
+		compatible = "richtek,rt8515";
+		/* GPIO 140 */
+		enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		/* GPIO 141 */
+		ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		/*
+		 * RFS is 16 kOhm and RTS is 100 kOhm giving
+		 * the flash max current 343mA and torch max
+		 * current 55 mA.
+		 */
+		richtek,rfs-ohms = <16000>;
+		richtek,rts-ohms = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_flash_default_mode>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+			flash-max-microamp = <343750>;
+			led-max-microamp = <55000>;
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the NCP6914 Camera power management unit */
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+			dvdd-supply = <&ab8500_ldo_aux6_reg>;
+		};
+	};
+
+	soc {
+		// External Micro SD slot
+		mmc@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_1_default>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
+			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		mmc@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			vmmc-supply = <&wlan_en>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		/*
+		 * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R"
+		 */
+		mmc@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			/* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */
+			post-power-on-delay-ms = <300>;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			bluetooth {
+				/* BCM4334B0 actually */
+				compatible = "brcm,bcm4330-bt";
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART connected to AB8505 USB */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "AUX1";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Supplies the MMS touchscreen only with 3.3V */
+						regulator-name = "AUX2";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "AUX3";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "AUX4";
+						/* Hammer to 3.3V for the touchscreen */
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "AUX5";
+						/* 1.8V for the touchscreen */
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "AUX6";
+						/* Used by sensors for 1.8 V in R0.1+ */
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux8 {
+						/* Unused */
+						regulator-name = "AUX8";
+					};
+				};
+			};
+		};
+
+		/* I2C0 */
+		i2c@80004000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@44 {
+				compatible = "sharp,gp2ap002s00f";
+				clock-frequency = <400000>;
+				reg = <0x44>;
+
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vio-supply = <&ab8500_ldo_aux6_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gp2ap002_kyle_default>;
+				sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+				sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+			};
+		};
+
+		/* I2C2 */
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			accel@18 {
+				compatible = "bosch,bma254";
+				clock-frequency = <400000>;
+				reg = <0x18>;
+
+				mount-matrix = "-1", "0", "0",
+					       "0", "-1", "0",
+					       "0", "0", "-1";
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux6_reg>;
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* Melfas MMS134S touchscreen */
+			touchscreen@48 {
+				compatible = "melfas,mms134s";
+				reg = <0x48>;
+				/* GPIO218 for IRQ */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				/* AVDD is "analog supply", 2.57-3.47 V */
+				avdd-supply = <&ab8500_ldo_aux2_reg>;
+				/* VDD is "digital supply" 1.71-3.47V */
+				vdd-supply = <&ab8500_ldo_aux5_reg>;
+
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&mms134s_kyle_default>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dsi_default_mode>;
+
+			dsi@a0351000 {
+				panel {
+					/*
+					 * NT35510-based Hydis HVA40WV1
+					 * Apparently some Kyle models can have a NT35512 fitted
+					 * here instead. In that case the boot loader needs to
+					 * modify this compatible.
+					 */
+					compatible = "hydis,hva40wv1", "novatek,nt35510";
+					reg = <0>;
+					/* v_lcd_3v0 2.3-4.8V */
+					vdd-supply = <&lcd_3v0_reg>;
+					/* v_lcd_1v8 1.65-3.3V */
+					vddi-supply = <&lcd_1v8_reg>;
+					/* GPIO 139 */
+					reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&display_default_mode>;
+					backlight = <&ktd253>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0_A_1 default config to include
+	 * the card detect GPIO217 line.
+	 */
+	sdi0 {
+		mc0_a_1_default {
+			default_cfg1 {
+				/* GPIO18, 19 & 20 unused so pull down */
+				ste,config = <&gpio_in_pd>;
+			};
+			default_cfg4 {
+				pins = "GPIO217_AH12"; /* card detect */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+
+	mcde {
+		dsi_default_mode: dsi_default {
+			default_mux1 {
+				/* Mux in VSI0 used for DSI TE */
+				function = "lcd";
+				groups = "lcdvsi0_a_1"; /* VSI0 for LCD */
+			};
+			default_cfg1 {
+				pins = "GPIO68_E1"; /* VSI0 */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	/* Two GPIO lines used by the display */
+	display {
+		display_default_mode: display_default {
+			kyle_cfg1 {
+				/*
+				 * OLED DETECT or check_pba, this appears to be high
+				 * on "PBA" which I guess is "prototype board A".
+				 */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+			kyle_cfg2 {
+				pins = "GPIO139_C9";
+				/*
+				 * MIPI_DSI0_RESET_N resets the display, leave high
+				 * (de-asserted) so we only assert reset explicitly
+				 * from the display driver.
+				 */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+
+	/* GPIO that enables the LDO regulator for the LCD display */
+	lcd-ldo {
+		lcd_pwr_en_default_mode: lcd_pwr_en_default {
+			/* LCD_PWR_EN on GPIO219 */
+			kyle_cfg1 {
+				pins = "GPIO219_AG10";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+
+	backlight {
+		gpio_backlight_default_mode: backlight_default {
+			kyle_cfg1 {
+				pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	flash {
+		gpio_flash_default_mode: flash_default {
+			kyle_cfg1 {
+				pins = "GPIO140_B11", "GPIO141_C12";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			kyle_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			kyle_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			kyle_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6"; /* VOL DOWN */
+					ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor GP2AP002 */
+	gp2ap002 {
+		gp2ap002_kyle_default: gp2ap002_kyle {
+			kyle_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for NCP6914 */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			kyle_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for ALPS HSCD compass */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			kyle_cfg1 {
+				pins = "GPIO151_B17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			kyle_cfg1 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		wlan_en_default_mode: wlan_en_default {
+			kyle_cfg2 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			kyle_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			kyle_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			kyle_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Interrupt line for the Melfas MMS134S touchscreen */
+	touchscreen {
+		mms134s_kyle_default: mms134s_kyle {
+			kyle_cfg1 {
+				pins = "GPIO218_AH11";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			kyle_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			kyle_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 94afd7a0fe1f..264f3e9b5fce 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -230,6 +230,8 @@
 			non-removable;
 			cap-mmc-highspeed;
 			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&ldo_3v3_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc2_a_1_default>;
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index 31c85f945c6b..9c79982ee7ba 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -11,7 +11,6 @@
 	compatible = "st,stih407-b2120", "st,stih407";
 
 	chosen {
-		bootargs = "clk_ignore_unused";
 		stdout-path = &sbc_serial0;
 	};
 
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 1ab40db7c91a..9cce9541e26b 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -36,8 +36,6 @@
 				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -74,24 +72,18 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
-				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0";
-				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
@@ -101,12 +93,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -115,26 +101,21 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
-				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -144,45 +125,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-proc-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-ext2fa9",
-						     "clk-ic-bdisp-0",
-						     "clk-ic-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-disp-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phy",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp";
-				clock-critical = <CLK_PROC_STFE>,
-						 <CLK_ICN_CPU>,
-						 <CLK_TX_ICN_DMU>,
-						 <CLK_EXT2F_A9>,
-						 <CLK_ICN_LMI>,
-						 <CLK_ICN_SBC>;
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -202,15 +144,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -219,32 +156,22 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff";
 			};
 		};
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -253,7 +180,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -262,37 +189,15 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "clk-pix-pip",
-						     "clk-pix-gdp1",
-						     "clk-pix-gdp2",
-						     "clk-pix-gdp3",
-						     "clk-pix-gdp4",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy";
-						     };
+			};
 		};
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
@@ -301,22 +206,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 23a1746f3baa..21f3347a91d6 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -616,6 +616,21 @@
 			st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
 		};
 
+		spifsm: spifsm@9022000{
+			compatible = "st,spi-fsm";
+			reg = <0x9022000 0x1000>;
+			reg-names = "spi-fsm";
+			clocks = <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+			clock-names = "emi_clk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fsm>;
+			st,syscfg = <&syscfg_core>;
+			st,boot-device-reg = <0x8c4>;
+			st,boot-device-spi = <0x68>;
+
+			status = "disabled";
+		};
+
 		sata0: sata@9b20000 {
 			compatible = "st,ahci";
 			reg = <0x9b20000 0x1000>;
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 158b2268748e..9d3b118f5f0f 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -11,7 +11,6 @@
 	compatible = "st,stih410-b2120", "st,stih410";
 
 	chosen {
-		bootargs = "clk_ignore_unused";
 		stdout-path = &sbc_serial0;
 	};
 
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index e2bb59783146..9d579c16c295 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -12,7 +12,6 @@
 	compatible = "st,stih410-b2260", "st,stih410";
 
 	chosen {
-		bootargs = "clk_ignore_unused";
 		stdout-path = &uart1;
 	};
 
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 81a8c25d7ba5..6b0e6d4477a3 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -39,8 +39,6 @@
 				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -74,25 +72,18 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
-				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
-				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
@@ -102,12 +93,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -116,26 +101,21 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
-				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -145,52 +125,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-proc-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-ext2fa9",
-						     "clk-ic-bdisp-0",
-						     "clk-ic-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-disp-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phy",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hades",
-						     "clk-clust-hades",
-						     "clk-hwpe-hades",
-						     "clk-fc-hades";
-				clock-critical = <CLK_PROC_STFE>,
-						 <CLK_ICN_CPU>,
-						 <CLK_TX_ICN_DMU>,
-						 <CLK_EXT2F_A9>,
-						 <CLK_ICN_LMI>,
-						 <CLK_ICN_SBC>;
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -210,15 +144,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -227,34 +156,22 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -263,7 +180,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -272,37 +189,15 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "clk-pix-pip",
-						     "clk-pix-gdp1",
-						     "clk-pix-gdp2",
-						     "clk-pix-gdp3",
-						     "clk-pix-gdp4",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy";
-						     };
+			};
 		};
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
@@ -311,22 +206,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 48c3c64e4c48..b66e2b29edea 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -11,7 +11,6 @@
 	compatible = "st,stih418-b2199", "st,stih418";
 
 	chosen {
-		bootargs = "clk_ignore_unused";
 		stdout-path = &sbc_serial0;
 	};
 
diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts
new file mode 100644
index 000000000000..a99604bebf8c
--- /dev/null
+++ b/arch/arm/boot/dts/stih418-b2264.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 STMicroelectronics
+ * Author: Alain Volmat <avolmat@me.com>
+ */
+/dts-v1/;
+#include "stih418.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	model = "STiH418 B2264";
+	compatible = "st,stih418-b2264", "st,stih418";
+
+	chosen {
+		stdout-path = &sbc_serial0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0xc0000000>;
+	};
+
+	cpus {
+		cpu@0 {
+			operating-points-v2 = <&cpu_opp_table>;
+			/* u-boot puts hpen in SBC dmem at 0xb8 offset */
+			cpu-release-addr = <0x94100b8>;
+		};
+		cpu@1 {
+			operating-points-v2 = <&cpu_opp_table>;
+			/* u-boot puts hpen in SBC dmem at 0xb8 offset */
+			cpu-release-addr = <0x94100b8>;
+		};
+		cpu@2 {
+			operating-points-v2 = <&cpu_opp_table>;
+			/* u-boot puts hpen in SBC dmem at 0xb8 offset */
+			cpu-release-addr = <0x94100b8>;
+		};
+		cpu@3 {
+			operating-points-v2 = <&cpu_opp_table>;
+			/* u-boot puts hpen in SBC dmem at 0xb8 offset */
+			cpu-release-addr = <0x94100b8>;
+		};
+	};
+
+	cpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <784000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <784000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <784000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <784000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <784000>;
+		};
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
+	};
+
+	soc {
+		leds {
+			compatible = "gpio-leds";
+			green {
+				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		pin-controller-sbc@961f080 {
+			gmac1 {
+				rgmii1-0 {
+					st,pins {
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 300 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 300 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 300 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 300 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 300 CLK_A>;
+					};
+				};
+			};
+		};
+
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ethernet0 {
+	phy-mode = "rgmii";
+	pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+	st,tx-retime-src = "clkgen";
+
+	snps,reset-gpio = <&pio0 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+
+	status = "okay";
+};
+
+&miphy28lp_phy {
+	phy_port0: port@9b22000 {
+		st,sata-gen = <2>; /* SATA GEN3 */
+		st,osc-rdy;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sbc_serial0 {
+	status = "okay";
+};
+
+&spifsm {
+	status = "okay";
+};
+
+&st_dwc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 8fa092462102..e84c476b83ed 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -39,8 +39,6 @@
 				compatible = "st,stih418-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -75,23 +73,18 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
 			};
 		};
 
@@ -101,11 +94,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -114,25 +102,21 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -142,49 +126,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-icn-reg",
-						     "clk-proc-bdisp-0",
-						     "clk-proc-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phyref",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hevc",
-						     "clk-clust-hevc",
-						     "clk-hwpe-hevc",
-						     "clk-fc-hevc",
-						     "clk-proc-mixer",
-						     "clk-proc-sc",
-						     "clk-avsp-hevc";
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -204,15 +145,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -221,34 +157,22 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -257,7 +181,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -266,44 +190,15 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "",
-						     "",
-						     "",
-						     "",
-						     "clk-tmds-hdmi-div2",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "clk-vp9";
 			};
 		};
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
@@ -312,22 +207,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index a05e2278b448..97eda4392fbe 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -27,6 +27,10 @@
 	};
 
 	soc {
+		rng11: rng@8a8a000 {
+			status = "disabled";
+		};
+
 		usb2_picophy1: phy2@0 {
 			compatible = "st,stih407-usb2-phy";
 			reg = <0 0>;
@@ -104,5 +108,13 @@
 			assigned-clock-parents = <&clk_s_c0_pll1 0>;
 			assigned-clock-rates = <200000000>;
 		};
+
+		thermal@91a0000 {
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 9ac1ffe53413..cb46326a8c75 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -60,7 +60,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@00000000 {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x2000000>;
 	};
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 8c982ae79f43..30905ce672a0 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -60,7 +60,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@00000000 {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x1000000>;
 	};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 95b08876b2b3..46b471d09c50 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -313,8 +313,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index fb45c5aa878d..4b10b013ffd5 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -159,3 +159,7 @@
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
 };
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 6cf1c8b4c6e2..fbf3826933e4 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -29,6 +29,7 @@
 		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
 		default-brightness-level = <8>;
 		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_panel_bl>;
 		status = "okay";
 	};
 
@@ -110,6 +111,7 @@
 	panel {
 		compatible = "edt,etm0700g0edh6";
 		backlight = <&display_bl>;
+		power-supply = <&reg_panel_bl>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -118,6 +120,21 @@
 		};
 	};
 
+	reg_panel_bl: regulator-panel-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_backlight";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_panel_supply>;
+	};
+
+	reg_panel_supply: regulator-panel-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_supply";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
 	sound {
 		compatible = "audio-graph-card";
 		routing =
@@ -172,15 +189,15 @@
 			sgtl5000_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&sgtl5000_tx_endpoint>;
+				bitclock-master = <&sgtl5000_tx_endpoint>;
 			};
 
 			sgtl5000_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&sgtl5000_rx_endpoint>;
+				bitclock-master = <&sgtl5000_rx_endpoint>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 64dca5b7f748..6885948f3024 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -220,8 +220,8 @@
 &i2c4 {
 	hdmi-transmitter@3d {
 		compatible = "adi,adv7513";
-		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
+		reg-names = "main", "edid", "cec", "packet";
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
@@ -239,8 +239,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 59f18846cf5d..899bfe04aeb9 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -220,15 +220,15 @@
 			cs42l51_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&cs42l51_tx_endpoint>;
+				bitclock-master = <&cs42l51_tx_endpoint>;
 			};
 
 			cs42l51_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&cs42l51_rx_endpoint>;
+				bitclock-master = <&cs42l51_rx_endpoint>;
 			};
 		};
 	};
@@ -470,8 +470,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index c04162ddec3c..7fd901f8d39a 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -788,7 +788,7 @@
 			reg = <0x4c>;
 			vcc-supply = <&palmas_ldo6_reg>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 1e30fa405fa0..cde9ae8fa04b 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1751,7 +1751,7 @@
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 			#thermal-sensor-cells = <1>;
 			vcc-supply = <&reg_module_3v3>;
 		};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 608896f8dd52..a46d9ba9bb7a 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1744,7 +1744,7 @@
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 			#thermal-sensor-cells = <1>;
 			vcc-supply = <&reg_module_3v3>;
 		};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 414cd1cafa7f..35ab296408e1 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1427,7 +1427,7 @@
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 		};
 
 		eeprom@56 {
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 5f71add38dfe..63a81270300a 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -91,7 +91,7 @@
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 1976c383912a..2280d75b66ab 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/input/atmel-maxtouch.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -454,7 +455,7 @@
 			vdda-supply = <&vdd_3v3_sys>;
 			vdd-supply  = <&vdd_3v3_sys>;
 
-			atmel,wakeup-method = <1>;
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
 		};
 
 		gyroscope@68 {
@@ -482,6 +483,9 @@
 					interrupt-parent = <&gpio>;
 					interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
 
+					vdd-supply   = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+
 					mount-matrix =	 "0",  "1",  "0",
 							 "1",  "0",  "0",
 							 "0",  "0", "-1";
@@ -693,6 +697,10 @@
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -719,7 +727,6 @@
 		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_vbus1>;
 	};
 
 	usb@c5008000 {
@@ -731,7 +738,7 @@
 		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_vbus3>;
+		vbus-supply = <&vdd_5v0_sys>;
 	};
 
 	brcm_wifi_pwrseq: wifi-pwrseq {
@@ -991,28 +998,6 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_vbus1: regulator@4 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_vbus3: regulator@5 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb3_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		gpio = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-picasso",
 			     "nvidia,tegra-audio-wm8903";
@@ -1044,11 +1029,48 @@
 	};
 
 	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents A500 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
 		skin-thermal {
 			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <0>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
 
 			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal {
@@ -1058,24 +1080,24 @@
 			thermal-sensors = <&nct1008 1>;
 
 			trips {
-				trip0: cpu-alert0 {
-					/* start throttling at 60C */
-					temperature = <60000>;
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
 					hysteresis = <200>;
 					type = "passive";
 				};
 
-				trip1: cpu-crit {
-					/* shut down at 70C */
-					temperature = <70000>;
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
 
 			cooling-maps {
-				map0 {
-					trip = <&trip0>;
+				map1 {
+					trip = <&trip2>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 3180bff90756..acc816bfd233 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -503,6 +503,10 @@
 		adt7461: temperature-sensor@4c {
 			compatible = "adi,adt7461";
 			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
 			#thermal-sensor-cells = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 95e6bccdb4f6..dd4d506683de 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -185,8 +185,9 @@
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
 					"cdev1", "cdev2", "dap1", "dtb", "gma",
 					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
+					"gpv", "i2cp", "irrx", "irtx", "pta",
+					"rm", "slxa", "slxk", "spia", "spib",
+					"uac";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -211,7 +212,7 @@
 			conf_ddc {
 				nvidia,pins = "ddc", "dta", "dtd", "kbca",
 					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
+					"sdc", "uad", "uca";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -221,10 +222,9 @@
 					"lvp0", "owc", "sdb";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
+			conf_sdd {
+				nvidia,pins = "sdd", "spic", "spie", "spih",
+					"uaa", "uab", "ucb";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index ae8300baa2d4..9732cd6f20b7 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -920,6 +920,10 @@
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 3) IRQ_TYPE_EDGE_FALLING>;
+
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -1251,21 +1255,34 @@
 	};
 
 	thermal-zones {
-		cpu-thermal {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents Nexus 7
+		 * from getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
 			polling-delay-passive = <1000>; /* milliseconds */
 			polling-delay = <5000>; /* milliseconds */
 
-			thermal-sensors = <&nct72 1>;
+			thermal-sensors = <&nct72 0>;
 
 			trips {
-				trip0: cpu-alert0 {
+				trip0: skin-alert {
 					/* throttle at 57C until temperature drops to 56.8C */
 					temperature = <57000>;
 					hysteresis = <200>;
 					type = "passive";
 				};
 
-				trip1: cpu-crit {
+				trip1: skin-crit {
 					/* shut down at 65C */
 					temperature = <65000>;
 					hysteresis = <2000>;
@@ -1285,5 +1302,40 @@
 				};
 			};
 		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index d9dd11569d4b..448f1397e64a 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -348,7 +348,7 @@
 			reg = <0x4c>;
 			vcc-supply = <&sys_3v3_reg>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index ab8744f3d72d..90db5ff72537 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -124,12 +124,11 @@
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 			vcc-supply = <&sys_3v3_reg>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
 			#thermal-sensor-cells = <1>;
-/*
- *			The interrupt is bugged, once triggered it never clears.
- *			interrupt-parent = <&gpio>;
- *			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
- */
 		};
 
 		pmic: pmic@2d {
@@ -4376,8 +4375,8 @@
 		nvidia,pins = "pcc2";
 		nvidia,function = "i2s4";
 		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+		nvidia,tristate = <TEGRA_PIN_DISABLE>;
+		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 	};
 	sdmmc4_rst_n_pcc3 {
 		nvidia,pins = "sdmmc4_rst_n_pcc3";
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index c577c191be4b..eaf4951d9ff8 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/tegra-pmc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "tegra30-peripherals-opp.dtsi"
 
@@ -800,6 +801,20 @@
 		reset-names = "fuse";
 	};
 
+	tsensor: tsensor@70014000 {
+		compatible = "nvidia,tegra30-tsensor";
+		reg = <0x70014000 0x500>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+		resets = <&tegra_car TEGRA30_CLK_TSENSOR>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_CLK_M>;
+		assigned-clock-rates = <500000>;
+
+		#thermal-sensor-cells = <1>;
+	};
+
 	hda@70030000 {
 		compatible = "nvidia,tegra30-hda";
 		reg = <0x70030000 0x10000>;
@@ -1062,32 +1077,36 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -1102,4 +1121,64 @@
 				     <&{/cpus/cpu@2}>,
 				     <&{/cpus/cpu@3}>;
 	};
+
+	thermal-zones {
+		tsensor0-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				level1_trip: dvfs-alert {
+					/* throttle at 80C until temperature drops to 79.8C */
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				level2_trip: cpu-div2-throttle {
+					/* hardware CPU x2 freq throttle at 85C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "hot";
+				};
+
+				level3_trip: soc-critical {
+					/* hardware shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&level1_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		tsensor1-thermal {
+			status = "disabled";
+
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&tsensor 1>;
+
+			trips {
+				dvfs-alert {
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 6f1e0f0d4f0a..043ddd70372f 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -311,8 +311,6 @@
 			compatible = "atmel,at93c46d";
 			pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
 			pinctrl-names = "default";
-			#address-cells = <0>;
-			#size-cells = <0>;
 			reg = <1>;
 			spi-max-frequency = <500000>;
 			spi-cs-high;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index df9ad831cf05..47c2a4b14c06 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -252,6 +252,27 @@
 			#size-cells = <0>;
 		};
 
+		smcc: memory-controller@e000e000 {
+			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+			reg = <0xe000e000 0x0001000>;
+			status = "disabled";
+			clock-names = "memclk", "apb_pclk";
+			clocks = <&clkc 11>, <&clkc 44>;
+			ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+				  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+				  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			nfc0: nand-controller@0,0 {
+				compatible = "arm,pl353-nand-r2p1";
+				reg = <0 0 0x1000000>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		sdhci0: mmc@e0100000 {
 			compatible = "arasan,sdhci-8.9a";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts
index b0b836aedd76..53fa6dbfd8fd 100644
--- a/arch/arm/boot/dts/zynq-ebaz4205.dts
+++ b/arch/arm/boot/dts/zynq-ebaz4205.dts
@@ -48,6 +48,14 @@
 	pinctrl-0 = <&pinctrl_gpio0_default>;
 };
 
+&nfc0 {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
+
 &pinctrl0 {
 	pinctrl_gpio0_default: gpio0-default {
 		mux {
@@ -118,6 +126,10 @@
 	};
 };
 
+&smcc {
+	status = "okay";
+};
+
 &sdhci0 {
 	status = "okay";
 	disable-wp;
author	Linus Torvalds <torvalds@linux-foundation.org>	2021-09-01 15:39:09 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2021-09-01 15:39:09 -0700
commit	7c636d4d20f8c5acfbfbc60f326fddb0e1cf5daa (patch)
tree	ccd1b1f27386ce7768cac58fc420be62c3bb60ca /arch/arm/boot
parent	32b47072f319bb65e9afad59e78153d83496f1f5 (diff)
parent	9e62ec0e661ca7161e5830bdbf8e69831b41e866 (diff)