summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3.dtsi
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2015-04-14 01:03:29 +0200
committerArnd Bergmann <arnd@arndb.de>2015-04-14 01:03:29 +0200
commit643ee0d50a7392671c0488912cdbb37549ac4cc7 (patch)
treec6264bd7ca5139f4f0183d12b0732bc96347b90f /arch/arm/boot/dts/omap3.dtsi
parent13a7a6ac0a11197edcd0f756a035f472b42cdf8b (diff)
parent21295368367beaa563b310d5492166dba158b884 (diff)
Merge tag 'omap-for-v4.1/prcm-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/late
Pull "Clean-up for omap PRCM (Power Reset Clock Management) and interconnects" from Tony Lindgren Patches originally from Tero Kristo <t-kristo@ti.com>. This sets gets us into a better position for further clean-up: - Gets PRCM code closer to being device drivers - Allows to move the remainig clock code to drivers/clk for v4.2 - Starts enforcing interconnect hierarchy in the SoC specific .dts files to enforce device drivers are only accesing registers in the related hardware module This patchset has seen quite a few revisions but did not come into mergeable shape until recently. As other patchsets for clock specific device drivers depend on this, it would be good to get this merged although it's a bit late for the v4.1 merge window. Note that as the device entries in the .dts files are moved around, this is based on earlier non-urgent fixes to avoid a non-trivial merge conflict. * tag 'omap-for-v4.1/prcm-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits) ARM: OMAP4+: control: add support for initializing control module via DT ARM: dts: dra7: add minimal l4 bus layout with control module support ARM: dts: omap5: add minimal l4 bus layout with control module support ARM: OMAP4+: control: remove support for legacy pad read/write ARM: OMAP4: display: convert display to use syscon for dsi muxing ARM: dts: omap4: add minimal l4 bus layout with control module support ARM: dts: am4372: add minimal l4 bus layout with control module support ARM: dts: am43xx-epos-evm: fix pinmux node layout ARM: dts: am33xx: add minimal l4 bus layout with control module support ARM: dts: omap3: add minimal l4 bus layout with control module support ARM: dts: omap24xx: add minimal l4 bus layout with control module support ARM: OMAP2+: control: add syscon support for register accesses ARM: OMAP2+: id: cache omap_type value ARM: OMAP2+: control: remove API for getting control module base address ARM: OMAP2+: clock: add low-level support for regmap ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags ARM: OMAP2+: CM: move SoC specific init calls within a generic API ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility ARM: OMAP2+: PRM: move SoC specific init calls within a generic API ...
Diffstat (limited to 'arch/arm/boot/dts/omap3.dtsi')
-rw-r--r--arch/arm/boot/dts/omap3.dtsi96
1 files changed, 55 insertions, 41 deletions
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f4f78c40b564..02cd996d0b06 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -87,6 +87,60 @@
ranges;
ti,hwmods = "l3_main";
+ l4_core: l4@48000000 {
+ compatible = "ti,omap3-l4-core", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x1000000>;
+
+ scm: scm@2000 {
+ compatible = "ti,omap3-scm", "simple-bus";
+ reg = <0x2000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ omap3_pmx_core: pinmux@30 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x330>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+
+ omap3_pmx_wkup: pinmux@a00 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0xa00 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+ };
+ };
+
aes: aes@480c5000 {
compatible = "ti,omap3-aes";
ti,hwmods = "aes";
@@ -121,19 +175,6 @@
};
};
- scrm: scrm@48002000 {
- compatible = "ti,omap3-scrm";
- reg = <0x48002000 0x2000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
counter32k: counter@48320000 {
compatible = "ti,omap-counter32k";
reg = <0x48320000 0x20>;
@@ -159,37 +200,10 @@
dma-requests = <96>;
};
- omap3_pmx_core: pinmux@48002030 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002030 0x0238>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0xff1f>;
- };
-
- omap3_pmx_wkup: pinmux@48002a00 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002a00 0x5c>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0xff1f>;
- };
-
- omap3_scm_general: tisyscon@48002270 {
- compatible = "syscon";
- reg = <0x48002270 0x2f0>;
- };
-
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
reg = <0x2b0 0x4>;
- syscon = <&omap3_scm_general>;
+ syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {
regulator-name = "pbias_mmc_omap2430";
regulator-min-microvolt = <1800000>;