Merge tag 'arc-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - hsdk platform unifying apertures

 - build system CROSS_COMPILE prefix

* tag 'arc-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: unify memory apertures configuration
  ARC: build: Try to guess CROSS_COMPILE with cc-cross-prefix

2 files changed, 157 insertions, 8 deletions

diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 480af1af9e63..03a0b19c92cd 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -5,6 +5,10 @@
 
 KBUILD_DEFCONFIG := nsim_hs_defconfig
 
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+endif
+
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
 cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
 cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=hs38
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index 6a91a742ab3d..7dd2dd335cf6 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -32,8 +32,6 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
 
 #define ARC_PERIPHERAL_BASE	0xf0000000
 #define CREG_BASE		(ARC_PERIPHERAL_BASE + 0x1000)
-#define CREG_PAE		(CREG_BASE + 0x180)
-#define CREG_PAE_UPDATE		(CREG_BASE + 0x194)
 
 #define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0xA000)
 #define SDIO_UHS_REG_EXT	(SDIO_BASE + 0x108)
@@ -99,20 +97,167 @@ static void __init hsdk_enable_gpio_intc_wire(void)
 	iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN);
 }
 
-static void __init hsdk_init_early(void)
+enum hsdk_axi_masters {
+	M_HS_CORE = 0,
+	M_HS_RTT,
+	M_AXI_TUN,
+	M_HDMI_VIDEO,
+	M_HDMI_AUDIO,
+	M_USB_HOST,
+	M_ETHERNET,
+	M_SDIO,
+	M_GPU,
+	M_DMAC_0,
+	M_DMAC_1,
+	M_DVFS
+};
+
+#define UPDATE_VAL	1
+
+/*
+ * This is modified configuration of AXI bridge. Default settings
+ * are specified in "Table 111 CREG Address Decoder register reset values".
+ *
+ * AXI_M_m_SLV{0|1} - Slave Select register for master 'm'.
+ * Possible slaves are:
+ *  - 0  => no slave selected
+ *  - 1  => DDR controller port #1
+ *  - 2  => SRAM controller
+ *  - 3  => AXI tunnel
+ *  - 4  => EBI controller
+ *  - 5  => ROM controller
+ *  - 6  => AXI2APB bridge
+ *  - 7  => DDR controller port #2
+ *  - 8  => DDR controller port #3
+ *  - 9  => HS38x4 IOC
+ *  - 10 => HS38x4 DMI
+ * AXI_M_m_OFFSET{0|1} - Addr Offset register for master 'm'
+ *
+ * Please read ARC HS Development IC Specification, section 17.2 for more
+ * information about apertures configuration.
+ *
+ * m	master		AXI_M_m_SLV0	AXI_M_m_SLV1	AXI_M_m_OFFSET0	AXI_M_m_OFFSET1
+ * 0	HS (CBU)	0x11111111	0x63111111	0xFEDCBA98	0x0E543210
+ * 1	HS (RTT)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 2	AXI Tunnel	0x88888888	0x88888888	0xFEDCBA98	0x76543210
+ * 3	HDMI-VIDEO	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 4	HDMI-ADUIO	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 5	USB-HOST	0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 6	ETHERNET	0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 7	SDIO		0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 8	GPU		0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 9	DMAC (port #1)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 10	DMAC (port #2)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 11	DVFS		0x00000000	0x60000000	0x00000000	0x00000000
+ */
+
+#define CREG_AXI_M_SLV0(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m)))
+#define CREG_AXI_M_SLV1(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x04))
+#define CREG_AXI_M_OFT0(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x08))
+#define CREG_AXI_M_OFT1(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x0C))
+#define CREG_AXI_M_UPDT(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x14))
+
+#define CREG_AXI_M_HS_CORE_BOOT	((void __iomem *)(CREG_BASE + 0x010))
+
+#define CREG_PAE		((void __iomem *)(CREG_BASE + 0x180))
+#define CREG_PAE_UPDT		((void __iomem *)(CREG_BASE + 0x194))
+
+static void __init hsdk_init_memory_bridge(void)
 {
+	u32 reg;
+
+	/*
+	 * M_HS_CORE has one unique register - BOOT.
+	 * We need to clean boot mirror (BOOT[1:0]) bits in them to avoid first
+	 * aperture to be masked by 'boot mirror'.
+	 */
+	reg = readl(CREG_AXI_M_HS_CORE_BOOT) & (~0x3);
+	writel(reg, CREG_AXI_M_HS_CORE_BOOT);
+	writel(0x11111111, CREG_AXI_M_SLV0(M_HS_CORE));
+	writel(0x63111111, CREG_AXI_M_SLV1(M_HS_CORE));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_CORE));
+	writel(0x0E543210, CREG_AXI_M_OFT1(M_HS_CORE));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_CORE));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HS_RTT));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HS_RTT));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_RTT));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HS_RTT));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_RTT));
+
+	writel(0x88888888, CREG_AXI_M_SLV0(M_AXI_TUN));
+	writel(0x88888888, CREG_AXI_M_SLV1(M_AXI_TUN));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_AXI_TUN));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_AXI_TUN));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_AXI_TUN));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_VIDEO));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_VIDEO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_VIDEO));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_VIDEO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_VIDEO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_AUDIO));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_AUDIO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_AUDIO));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_AUDIO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_AUDIO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_USB_HOST));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_USB_HOST));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_USB_HOST));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_USB_HOST));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_USB_HOST));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_ETHERNET));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_ETHERNET));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_ETHERNET));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_ETHERNET));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_ETHERNET));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_SDIO));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_SDIO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_SDIO));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_SDIO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_SDIO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_GPU));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_GPU));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_GPU));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_GPU));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_GPU));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_0));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_DMAC_0));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_0));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_DMAC_0));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_0));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_1));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_DMAC_1));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_1));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_DMAC_1));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_1));
+
+	writel(0x00000000, CREG_AXI_M_SLV0(M_DVFS));
+	writel(0x60000000, CREG_AXI_M_SLV1(M_DVFS));
+	writel(0x00000000, CREG_AXI_M_OFT0(M_DVFS));
+	writel(0x00000000, CREG_AXI_M_OFT1(M_DVFS));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DVFS));
+
 	/*
 	 * PAE remapping for DMA clients does not work due to an RTL bug, so
 	 * CREG_PAE register must be programmed to all zeroes, otherwise it
 	 * will cause problems with DMA to/from peripherals even if PAE40 is
 	 * not used.
 	 */
+	writel(0x00000000, CREG_PAE);
+	writel(UPDATE_VAL, CREG_PAE_UPDT);
+}
 
-	/* Default is 1, which means "PAE offset = 4GByte" */
-	writel_relaxed(0, (void __iomem *) CREG_PAE);
-
-	/* Really apply settings made above */
-	writel(1, (void __iomem *) CREG_PAE_UPDATE);
+static void __init hsdk_init_early(void)
+{
+	hsdk_init_memory_bridge();
 
 	/*
 	 * Switch SDIO external ciu clock divider from default div-by-8 to