diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-07-01 09:24:26 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-07-01 09:24:26 -0700 |
| commit | 0890a264794f33df540fbaf274699146903b4e6b (patch) | |
| tree | 0db148936c0275f7da7e607768e3c1018fb733cc /arch/arc/include | |
| parent | 05a8256c586ab75bcd6b793737b2022a1a98cb1e (diff) | |
| parent | 40b8ad8f762cae4c44852ee1736ba766f52d5cc3 (diff) | |
Merge tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC architecture updates from Vineet Gupta:
- support for HS38 cores based on ARCv2 ISA
ARCv2 is the next generation ISA from Synopsys and basis for the
HS3{4,6,8} families of processors which retain the traditional ARC mantra of
low power and configurability and are now more performant and feature rich.
HS38x is a 10 stage pipeline core which supports MMU (with huge pages) and
SMP (upto 4 cores) among other features.
+ www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor
+ http://news.synopsys.com/2014-10-14-New-DesignWare-ARC-HS38-Processor-Doubles-Performance-for-Embedded-Linux-Applications
+ http://www.embedded.com/electronics-news/4435975/Synopsys-ARC-HS38-core-gives-2X-boost-to-Linux-based-apps
- support for ARC SDP (Software Development platform): Main Board + CPU Cards
= AXS101: CPU Card with ARC700 in silicon @ 700 MHz
= AXS103: CPU Card with HS38x in FPGA
- refactoring of ARCompact port to accomodate new ARCv2 ISA
- misc updates/cleanups
* tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (72 commits)
ARC: Fix build failures for ARCompact in linux-next after ARCv2 support
ARCv2: Allow older gcc to cope with new regime of ARCv2/ARCompact support
ARCv2: [vdk] dts files and defconfig for HS38 VDK
ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores
ARC: [axs101] Prepare for AXS103
ARCv2: [nsim*hs*] Support simulation platforms for HS38x cores
ARCv2: All bits in place, allow ARCv2 builds
ARCv2: SLC: Handle explcit flush for DMA ops (w/o IO-coherency)
ARCv2: STAR 9000837815 workaround hardware exclusive transactions livelock
ARC: Reduce bitops lines of code using macros
ARCv2: barriers
arch: conditionally define smp_{mb,rmb,wmb}
ARC: add smp barriers around atomics per Documentation/atomic_ops.txt
ARC: add compiler barrier to LLSC based cmpxchg
ARCv2: SMP: intc: IDU 2nd level intc for dynamic IRQ distribution
ARCv2: SMP: clocksource: Enable Global Real Time counter
ARCv2: SMP: ARConnect debug/robustness
ARCv2: SMP: Support ARConnect (MCIP) for Inter-Core-Interrupts et al
ARC: make plat_smp_ops weak to allow over-rides
ARCv2: clocksource: Introduce 64bit local RTC counter
...
Diffstat (limited to 'arch/arc/include')
28 files changed, 1502 insertions, 928 deletions
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index 769b312c1abb..1a80cc91a03b 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild @@ -1,5 +1,4 @@ generic-y += auxvec.h -generic-y += barrier.h generic-y += bitsperlong.h generic-y += bugs.h generic-y += clkdev.h diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index e2b1b1211b0d..070f58827a5c 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -16,6 +16,8 @@ #define ARC_REG_PERIBASE_BCR 0x69 #define ARC_REG_FP_BCR 0x6B /* ARCompact: Single-Precision FPU */ #define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */ +#define ARC_REG_FP_V2_BCR 0xc8 /* ARCv2 FPU */ +#define ARC_REG_SLC_BCR 0xce #define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */ #define ARC_REG_TIMERS_BCR 0x75 #define ARC_REG_AP_BCR 0x76 @@ -31,6 +33,7 @@ #define ARC_REG_BPU_BCR 0xc0 #define ARC_REG_ISA_CFG_BCR 0xc1 #define ARC_REG_RTT_BCR 0xF2 +#define ARC_REG_IRQ_BCR 0xF3 #define ARC_REG_SMART_BCR 0xFF /* status32 Bits Positions */ @@ -51,6 +54,7 @@ * [15: 8] = Exception Cause Code * [ 7: 0] = Exception Parameters (for certain types only) */ +#ifdef CONFIG_ISA_ARCOMPACT #define ECR_V_MEM_ERR 0x01 #define ECR_V_INSN_ERR 0x02 #define ECR_V_MACH_CHK 0x20 @@ -58,6 +62,15 @@ #define ECR_V_DTLB_MISS 0x22 #define ECR_V_PROTV 0x23 #define ECR_V_TRAP 0x25 +#else +#define ECR_V_MEM_ERR 0x01 +#define ECR_V_INSN_ERR 0x02 +#define ECR_V_MACH_CHK 0x03 +#define ECR_V_ITLB_MISS 0x04 +#define ECR_V_DTLB_MISS 0x05 +#define ECR_V_PROTV 0x06 +#define ECR_V_TRAP 0x09 +#endif /* DTLB Miss and Protection Violation Cause Codes */ @@ -76,9 +89,6 @@ #define ECR_C_BIT_DTLB_LD_MISS 8 #define ECR_C_BIT_DTLB_ST_MISS 9 -/* Dummy ECR values for Interrupts */ -#define event_IRQ1 0x0031abcd -#define event_IRQ2 0x0032abcd /* Auxiliary registers */ #define AUX_IDENTITY 4 @@ -204,9 +214,11 @@ struct bcr_identity { struct bcr_isa { #ifdef CONFIG_CPU_BIG_ENDIAN - unsigned int pad1:23, atomic1:1, ver:8; + unsigned int div_rem:4, pad2:4, ldd:1, unalign:1, atomic:1, be:1, + pad1:11, atomic1:1, ver:8; #else - unsigned int ver:8, atomic1:1, pad1:23; + unsigned int ver:8, atomic1:1, pad1:11, be:1, atomic:1, unalign:1, + ldd:1, pad2:4, div_rem:4; #endif }; @@ -269,11 +281,19 @@ struct bcr_fp_arcompact { #endif }; +struct bcr_fp_arcv2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad2:15, dp:1, pad1:7, sp:1, ver:8; +#else + unsigned int ver:8, sp:1, pad1:7, dp:1, pad2:15; +#endif +}; + struct bcr_timer { #ifdef CONFIG_CPU_BIG_ENDIAN - unsigned int pad2:15, rtsc:1, pad1:6, t1:1, t0:1, ver:8; + unsigned int pad2:15, rtsc:1, pad1:5, rtc:1, t1:1, t0:1, ver:8; #else - unsigned int ver:8, t0:1, t1:1, pad1:6, rtsc:1, pad2:15; + unsigned int ver:8, t0:1, t1:1, rtc:1, pad1:5, rtsc:1, pad2:15; #endif }; @@ -285,6 +305,14 @@ struct bcr_bpu_arcompact { #endif }; +struct bcr_bpu_arcv2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:6, fbe:2, tqe:2, ts:4, ft:1, rse:2, pte:3, bce:3, ver:8; +#else + unsigned int ver:8, bce:3, pte:3, rse:2, ft:1, ts:4, tqe:2, fbe:2, pad:6; +#endif +}; + struct bcr_generic { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int pad:24, ver:8; @@ -299,11 +327,12 @@ struct bcr_generic { */ struct cpuinfo_arc_mmu { - unsigned int ver, pg_sz, sets, ways, u_dtlb, u_itlb, num_tlb; + unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, u_dtlb:6, u_itlb:6; + unsigned int num_tlb:16, sets:12, ways:4; }; struct cpuinfo_arc_cache { - unsigned int sz_k:8, line_len:8, assoc:4, ver:4, alias:1, vipt:1, pad:6; + unsigned int sz_k:14, line_len:8, assoc:4, ver:4, alias:1, vipt:1; }; struct cpuinfo_arc_bpu { @@ -315,14 +344,13 @@ struct cpuinfo_arc_ccm { }; struct cpuinfo_arc { - struct cpuinfo_arc_cache icache, dcache; + struct cpuinfo_arc_cache icache, dcache, slc; struct cpuinfo_arc_mmu mmu; struct cpuinfo_arc_bpu bpu; struct bcr_identity core; struct bcr_isa isa; struct bcr_timer timers; unsigned int vec_base; - unsigned int uncached_base; struct cpuinfo_arc_ccm iccm, dccm; struct { unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3, @@ -336,6 +364,22 @@ struct cpuinfo_arc { extern struct cpuinfo_arc cpuinfo_arc700[]; +static inline int is_isa_arcv2(void) +{ + return IS_ENABLED(CONFIG_ISA_ARCV2); +} + +static inline int is_isa_arcompact(void) +{ + return IS_ENABLED(CONFIG_ISA_ARCOMPACT); +} + +#if defined(CONFIG_ISA_ARCOMPACT) && !defined(_CPU_DEFAULT_A7) +#error "Toolchain not configured for ARCompact builds" +#elif defined(CONFIG_ISA_ARCV2) && !defined(_CPU_DEFAULT_HS) +#error "Toolchain not configured for ARCv2 builds" +#endif + #endif /* __ASEMBLY__ */ #endif /* _ASM_ARC_ARCREGS_H */ diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h index 9917a45fc430..03484cb4d16d 100644 --- a/arch/arc/include/asm/atomic.h +++ b/arch/arc/include/asm/atomic.h @@ -23,13 +23,21 @@ #define atomic_set(v, i) (((v)->counter) = (i)) +#ifdef CONFIG_ISA_ARCV2 +#define PREFETCHW " prefetchw [%1] \n" +#else +#define PREFETCHW +#endif + #define ATOMIC_OP(op, c_op, asm_op) \ static inline void atomic_##op(int i, atomic_t *v) \ { \ unsigned int temp; \ \ __asm__ __volatile__( \ - "1: llock %0, [%1] \n" \ + "1: \n" \ + PREFETCHW \ + " llock %0, [%1] \n" \ " " #asm_op " %0, %0, %2 \n" \ " scond %0, [%1] \n" \ " bnz 1b \n" \ @@ -43,8 +51,16 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \ { \ unsigned int temp; \ \ + /* \ + * Explicit full memory barrier needed before/after as \ + * LLOCK/SCOND thmeselves don't provide any such semantics \ + */ \ + smp_mb(); \ + \ __asm__ __volatile__( \ - "1: llock %0, [%1] \n" \ + "1: \n" \ + PREFETCHW \ + " llock %0, [%1] \n" \ " " #asm_op " %0, %0, %2 \n" \ " scond %0, [%1] \n" \ " bnz 1b \n" \ @@ -52,6 +68,8 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \ : "r"(&v->counter), "ir"(i) \ : "cc"); \ \ + smp_mb(); \ + \ return temp; \ } @@ -105,6 +123,9 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \ unsigned long flags; \ unsigned long temp; \ \ + /* \ + * spin lock/unlock provides the needed smp_mb() before/after \ + */ \ atomic_ops_lock(flags); \ temp = v->counter; \ temp c_op i; \ @@ -142,9 +163,19 @@ ATOMIC_OP(and, &=, and) #define __atomic_add_unless(v, a, u) \ ({ \ int c, old; \ + \ + /* \ + * Explicit full memory barrier needed before/after as \ + * LLOCK/SCOND thmeselves don't provide any such semantics \ + */ \ + smp_mb(); \ + \ c = atomic_read(v); \ while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c)\ c = old; \ + \ + smp_mb(); \ + \ c; \ }) diff --git a/arch/arc/include/asm/barrier.h b/arch/arc/include/asm/barrier.h new file mode 100644 index 000000000000..a7209983ee64 --- /dev/null +++ b/arch/arc/include/asm/barrier.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_BARRIER_H +#define __ASM_BARRIER_H + +#ifdef CONFIG_ISA_ARCV2 + +/* + * ARCv2 based HS38 cores are in-order issue, but still weakly ordered + * due to micro-arch buffering/queuing of load/store, cache hit vs. miss ... + * + * Explicit barrier provided by DMB instruction + * - Operand supports fine grained load/store/load+store semantics + * - Ensures that selected memory operation issued before it will complete + * before any subsequent memory operation of same type + * - DMB guarantees SMP as well as local barrier semantics + * (asm-generic/barrier.h ensures sane smp_*mb if not defined here, i.e. + * UP: barrier(), SMP: smp_*mb == *mb) + * - DSYNC provides DMB+completion_of_cache_bpu_maintenance_ops hence not needed + * in the general case. Plus it only provides full barrier. + */ + +#define mb() asm volatile("dmb 3\n" : : : "memory") +#define rmb() asm volatile("dmb 1\n" : : : "memory") +#define wmb() asm volatile("dmb 2\n" : : : "memory") + +#endif + +#ifdef CONFIG_ISA_ARCOMPACT + +/* + * ARCompact based cores (ARC700) only have SYNC instruction which is super + * heavy weight as it flushes the pipeline as well. + * There are no real SMP implementations of such cores. + */ + +#define mb() asm volatile("sync\n" : : : "memory") +#endif + +#include <asm-generic/barrier.h> + +#endif diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h index 4051e9525939..99fe118d3730 100644 --- a/arch/arc/include/asm/bitops.h +++ b/arch/arc/include/asm/bitops.h @@ -18,83 +18,50 @@ #include <linux/types.h> #include <linux/compiler.h> #include <asm/barrier.h> +#ifndef CONFIG_ARC_HAS_LLSC +#include <asm/smp.h> +#endif -/* - * Hardware assisted read-modify-write using ARC700 LLOCK/SCOND insns. - * The Kconfig glue ensures that in SMP, this is only set if the container - * SoC/platform has cross-core coherent LLOCK/SCOND - */ #if defined(CONFIG_ARC_HAS_LLSC) -static inline void set_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned int temp; - - m += nr >> 5; - - /* - * ARC ISA micro-optimization: - * - * Instructions dealing with bitpos only consider lower 5 bits (0-31) - * e.g (x << 33) is handled like (x << 1) by ASL instruction - * (mem pointer still needs adjustment to point to next word) - * - * Hence the masking to clamp @nr arg can be elided in general. - * - * However if @nr is a constant (above assumed it in a register), - * and greater than 31, gcc can optimize away (x << 33) to 0, - * as overflow, given the 32-bit ISA. Thus masking needs to be done - * for constant @nr, but no code is generated due to const prop. - */ - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - __asm__ __volatile__( - "1: llock %0, [%1] \n" - " bset %0, %0, %2 \n" - " scond %0, [%1] \n" - " bnz 1b \n" - : "=&r"(temp) - : "r"(m), "ir"(nr) - : "cc"); -} - -static inline void clear_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned int temp; - - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - __asm__ __volatile__( - "1: llock %0, [%1] \n" - " bclr %0, %0, %2 \n" - " scond %0, [%1] \n" - " bnz 1b \n" - : "=&r"(temp) - : "r"(m), "ir"(nr) - : "cc"); -} - -static inline void change_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned int temp; - - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; +/* + * Hardware assisted Atomic-R-M-W + */ - __asm__ __volatile__( - "1: llock %0, [%1] \n" - " bxor %0, %0, %2 \n" - " scond %0, [%1] \n" - " bnz 1b \n" - : "=&r"(temp) - : "r"(m), "ir"(nr) - : "cc"); +#define BIT_OP(op, c_op, asm_op) \ +static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\ +{ \ + unsigned int temp; \ + \ + m += nr >> 5; \ + \ + /* \ + * ARC ISA micro-optimization: \ + * \ + * Instructions dealing with bitpos only consider lower 5 bits \ + * e.g (x << 33) is handled like (x << 1) by ASL instruction \ + * (mem pointer still needs adjustment to point to next word) \ + * \ + * Hence the masking to clamp @nr arg can be elided in general. \ + * \ + * However if @nr is a constant (above assumed in a register), \ + * and greater than 31, gcc can optimize away (x << 33) to 0, \ + * as overflow, given the 32-bit ISA. Thus masking needs to be \ + * done for const @nr, but no code is generated due to gcc \ + * const prop. \ + */ \ + if (__builtin_constant_p(nr)) \ + nr &= 0x1f; \ + \ + __asm__ __volatile__( \ + "1: llock %0, [%1] \n" \ + " " #asm_op " %0, %0, %2 \n" \ + " scond %0, [%1] \n" \ + " bnz 1b \n" \ + : "=&r"(temp) /* Early clobber, to prevent reg reuse */ \ + : "r"(m), /* Not "m": llock only supports reg direct addr mode */ \ + "ir"(nr) \ + : "cc"); \ } /* @@ -108,75 +75,38 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *m) * Since ARC lacks a equivalent h/w primitive, the bit is set unconditionally * and the old value of bit is returned */ -static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long old, temp; - - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - __asm__ __volatile__( - "1: llock %0, [%2] \n" - " bset %1, %0, %3 \n" - " scond %1, [%2] \n" - " bnz 1b \n" - : "=&r"(old), "=&r"(temp) - : "r"(m), "ir"(nr) - : "cc"); - - return (old & (1 << nr)) != 0; -} - -static inline int -test_and_clear_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned int old, temp; - - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - __asm__ __volatile__( - "1: llock %0, [%2] \n" - " bclr %1, %0, %3 \n" - " scond %1, [%2] \n" - " bnz 1b \n" - : "=&r"(old), "=&r"(temp) - : "r"(m), "ir"(nr) - : "cc"); - - return (old & (1 << nr)) != 0; -} - -static inline int -test_and_change_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned int old, temp; - - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - __asm__ __volatile__( - "1: llock %0, [%2] \n" - " bxor %1, %0, %3 \n" - " scond %1, [%2] \n" - " bnz 1b \n" - : "=&r"(old), "=&r"(temp) - : "r"(m), "ir"(nr) - : "cc"); - - return (old & (1 << nr)) != 0; +#define TEST_N_BIT_OP(op, c_op, asm_op) \ +static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\ +{ \ + unsigned long old, temp; \ + \ + m += nr >> 5; \ + \ + if (__builtin_constant_p(nr)) \ + nr &= 0x1f; \ + \ + /* \ + * Explicit full memory barrier needed before/after as \ + * LLOCK/SCOND themselves don't provide any such smenatic \ + */ \ + smp_mb(); \ + \ + __asm__ __volatile__( \ + "1: llock %0, [%2] \n" \ + " " #asm_op " %1, %0, %3 \n" \ + " scond %1, [%2] \n" \ + " bnz 1b \n" \ + : "=&r"(old), "=&r"(temp) \ + : "r"(m), "ir"(nr) \ + : "cc"); \ + \ + smp_mb(); \ + \ + return (old & (1 << nr)) != 0; \ } #else /* !CONFIG_ARC_HAS_LLSC */ -#include <asm/smp.h> - /* * Non hardware assisted Atomic-R-M-W * Locking would change to irq-disabling only (UP) and spinlocks (SMP) @@ -193,108 +123,43 @@ test_and_change_bit(unsigned long nr, volatile unsigned long *m) * at compile time) */ -static inline void set_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long temp, flags; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - bitops_lock(flags); - - temp = *m; - *m = temp | (1UL << nr); - - bitops_unlock(flags); -} - -static inline void clear_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long temp, flags; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - bitops_lock(flags); - - temp = *m; - *m = temp & ~(1UL << nr); - - bitops_unlock(flags); -} - -static inline void change_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long temp, flags; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - bitops_lock(flags); - - temp = *m; - *m = temp ^ (1UL << nr); - - bitops_unlock(flags); -} - -static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long old, flags; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - bitops_lock(flags); - - old = *m; - *m = old | (1 << nr); - - bitops_unlock(flags); - - return (old & (1 << nr)) != 0; -} - -static inline int -test_and_clear_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long old, flags; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - bitops_lock(flags); - - old = *m; - *m = old & ~(1 << nr); - - bitops_unlock(flags); - - return (old & (1 << nr)) != 0; +#define BIT_OP(op, c_op, asm_op) \ +static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\ +{ \ + unsigned long temp, flags; \ + m += nr >> 5; \ + \ + if (__builtin_constant_p(nr)) \ + nr &= 0x1f; \ + \ + /* \ + * spin lock/unlock provide the needed smp_mb() before/after \ + */ \ + bitops_lock(flags); \ + \ + temp = *m; \ + *m = temp c_op (1UL << nr); \ + \ + bitops_unlock(flags); \ } -static inline int -test_and_change_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long old, flags; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - bitops_lock(flags); - - old = *m; - *m = old ^ (1 << nr); - - bitops_unlock(flags); - - return (old & (1 << nr)) != 0; +#define TEST_N_BIT_OP(op, c_op, asm_op) \ +static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\ +{ \ + unsigned long old, flags; \ + m += nr >> 5; \ + \ + if (__builtin_constant_p(nr)) \ + nr &= 0x1f; \ + \ + bitops_lock(flags); \ + \ + old = *m; \ + *m = old c_op (1 << nr); \ + \ + bitops_unlock(flags); \ + \ + return (old & (1 << nr)) != 0; \ } #endif /* CONFIG_ARC_HAS_LLSC */ @@ -303,86 +168,51 @@ test_and_change_bit(unsigned long nr, volatile unsigned long *m) * Non atomic variants **************************************/ -static inline void __set_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long temp; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - temp = *m; - *m = temp | (1UL << nr); -} - -static inline void __clear_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long temp; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - temp = *m; - *m = temp & ~(1UL << nr); -} - -static inline void __change_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long temp; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - temp = *m; - *m = temp ^ (1UL << nr); -} - -static inline int -__test_and_set_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long old; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - old = *m; - *m = old | (1 << nr); - - return (old & (1 << nr)) != 0; +#define __BIT_OP(op, c_op, asm_op) \ +static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m) \ +{ \ + unsigned long temp; \ + m += nr >> 5; \ + \ + if (__builtin_constant_p(nr)) \ + nr &= 0x1f; \ + \ + temp = *m; \ + *m = temp c_op (1UL << nr); \ } -static inline int -__test_and_clear_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long old; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - old = *m; - *m = old & ~(1 << nr); - - return (old & (1 << nr)) != 0; +#define __TEST_N_BIT_OP(op, c_op, asm_op) \ +static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\ +{ \ + unsigned long old; \ + m += nr >> 5; \ + \ + if (__builtin_constant_p(nr)) \ + nr &= 0x1f; \ + \ + old = *m; \ + *m = old c_op (1 << nr); \ + \ + return (old & (1 << nr)) != 0; \ } -static inline int -__test_and_change_bit(unsigned long nr, volatile unsigned long *m) -{ - unsigned long old; - m += nr >> 5; - - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - old = *m; - *m = old ^ (1 << nr); - - return (old & (1 << nr)) != 0; -} +#define BIT_OPS(op, c_op, asm_op) \ + \ + /* set_bit(), clear_bit(), change_bit() */ \ + BIT_OP(op, c_op, asm_op) \ + \ + /* test_and_set_bit(), test_and_clear_bit(), test_and_change_bit() */\ + TEST_N_BIT_OP(op, c_op, asm_op) \ + \ + /* __set_bit(), __clear_bit(), __change_bit() */ \ + __BIT_OP(op, c_op, asm_op) \ + \ + /* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\ + __TEST_N_BIT_OP(op, c_op, asm_op) + +BIT_OPS(set, |, bset) +BIT_OPS(clear, & ~, bclr) +BIT_OPS(change, ^, bxor) /* * This routine doesn't need to be atomic. @@ -402,6 +232,8 @@ test_bit(unsigned int nr, const volatile unsigned long *addr) return ((mask & *addr) != 0); } +#ifdef CONFIG_ISA_ARCOMPACT + /* * Count the number of zeros, starting from MSB * Helper for fls( ) friends @@ -494,6 +326,75 @@ static inline __attribute__ ((const)) int __ffs(unsigned long word) return ffs(word) - 1; } +#else /* CONFIG_ISA_ARCV2 */ + +/* + * fls = Find Last Set in word + * @result: [1-32] + * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0 + */ +static inline __attribute__ ((const)) int fls(unsigned long x) +{ + int n; + + asm volatile( + " fls.f %0, %1 \n" /* 0:31; 0(Z) if src 0 */ + " add.nz %0, %0, 1 \n" /* 0:31 -> 1:32 */ + : "=r"(n) /* Early clobber not needed */ + : "r"(x) + : "cc"); + + return n; +} + +/* + * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set + */ +static inline __attribute__ ((const)) int __fls(unsigned long x) +{ + /* FLS insn has exactly same semantics as the API */ + return __builtin_arc_fls(x); +} + +/* + * ffs = Find First Set in word (LSB to MSB) + * @result: [1-32], 0 if all 0's + */ +static inline __attribute__ ((const)) int ffs(unsigned long x) +{ + int n; + + asm volatile( + " ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */ + " add.nz %0, %0, 1 \n" /* 0:31 -> 1:32 */ + " mov.z %0, 0 \n" /* 31(Z)-> 0 */ + : "=r"(n) /* Early clobber not needed */ + : "r"(x) + : "cc"); + + return n; +} + +/* + * __ffs: Similar to ffs, but zero based (0-31) + */ +static inline __attribute__ ((const)) int __ffs(unsigned long x) +{ + int n; + + asm volatile( + " ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */ + " mov.z %0, 0 \n" /* 31(Z)-> 0 */ + : "=r"(n) + : "r"(x) + : "cc"); + + return n; + +} + +#endif /* CONFIG_ISA_ARCOMPACT */ + /* * ffz = Find First Zero in word. * @return:[0-31], 32 if all 1's diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 7861255da32d..d67345d3e2d4 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -60,7 +60,7 @@ extern void read_decode_cache_bcr(void); #define ARC_REG_IC_IVIC 0x10 #define ARC_REG_IC_CTRL 0x11 #define ARC_REG_IC_IVIL 0x19 -#if defined(CONFIG_ARC_MMU_V3) +#if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4) #define ARC_REG_IC_PTAG 0x1E #endif @@ -74,12 +74,24 @@ extern void read_decode_cache_bcr(void); #define ARC_REG_DC_IVDL 0x4A #define ARC_REG_DC_FLSH 0x4B #define ARC_REG_DC_FLDL 0x4C -#if defined(CONFIG_ARC_MMU_V3) #define ARC_REG_DC_PTAG 0x5C -#endif /* Bit val in DC_CTRL */ #define DC_CTRL_INV_MODE_FLUSH 0x40 #define DC_CTRL_FLUSH_STATUS 0x100 +/*System-level cache (L2 cache) related Auxiliary registers */ +#define ARC_REG_SLC_CFG 0x901 +#define ARC_REG_SLC_CTRL 0x903 +#define ARC_REG_SLC_FLUSH 0x904 +#define ARC_REG_SLC_INVALIDATE 0x905 +#define ARC_REG_SLC_RGN_START 0x914 +#define ARC_REG_SLC_RGN_END 0x916 + +/* Bit val in SLC_CONTROL */ +#define SLC_CTRL_IM 0x040 +#define SLC_CTRL_DISABLE 0x001 +#define SLC_CTRL_BUSY 0x100 +#define SLC_CTRL_RGN_OP_INV 0x200 + #endif /* _ASM_CACHE_H */ diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 6abc4972bc93..0992d3dbcc65 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -34,9 +34,7 @@ void flush_cache_all(void); void flush_icache_range(unsigned long start, unsigned long end); void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len); void __inv_icache_page(unsigned long paddr, unsigned long vaddr); -void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr); -#define __flush_dcache_page(p, v) \ - ___flush_dcache_page((unsigned long)p, (unsigned long)v) +void __flush_dcache_page(unsigned long paddr, unsigned long vaddr); #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h index 03cd6894855d..44fd531f4d7b 100644 --- a/arch/arc/include/asm/cmpxchg.h +++ b/arch/arc/include/asm/cmpxchg.h @@ -10,6 +10,8 @@ #define __ASM_ARC_CMPXCHG_H #include <linux/types.h> + +#include <asm/barrier.h> #include <asm/smp.h> #ifdef CONFIG_ARC_HAS_LLSC @@ -19,16 +21,25 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new) { unsigned long prev; + /* + * Explicit full memory barrier needed before/after as + * LLOCK/SCOND thmeselves don't provide any such semantics + */ + smp_mb(); + __asm__ __volatile__( "1: llock %0, [%1] \n" " brne %0, %2, 2f \n" " scond %3, [%1] \n" " bnz 1b \n" "2: \n" - : "=&r"(prev) - : "r"(ptr), "ir"(expected), - "r"(new) /* can't be "ir". scond can't take limm for "b" */ - : "cc"); + : "=&r"(prev) /* Early clobber, to prevent reg reuse */ + : "r"(ptr), /* Not "m": llock only supports reg direct addr mode */ + "ir"(expected), + "r"(new) /* can't be "ir". scond can't take LIMM for "b" */ + : "cc", "memory"); /* so that gcc knows memory is being written here */ + + smp_mb(); return prev; } @@ -42,6 +53,9 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new) int prev; volatile unsigned long *p = ptr; + /* + * spin lock/unlock provide the needed smp_mb() before/after + */ atomic_ops_lock(flags); prev = *p; if (prev == expected) @@ -77,12 +91,16 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr, switch (size) { case 4: + smp_mb(); + __asm__ __volatile__( " ex %0, [%1] \n" : "+r"(val) : "r"(ptr) : "memory"); + smp_mb(); + return val; } return __xchg_bad_pointer(); diff --git a/arch/arc/include/asm/delay.h b/arch/arc/include/asm/delay.h index 43de30256981..08e7e2a16ac1 100644 --- a/arch/arc/include/asm/delay.h +++ b/arch/arc/include/asm/delay.h @@ -22,11 +22,10 @@ static inline void __delay(unsigned long loops) { __asm__ __volatile__( - "1: sub.f %0, %0, 1 \n" - " jpnz 1b \n" - : "+r"(loops) - : - : "cc"); + " lp 1f \n" + " nop \n" + "1: \n" + : "+l"(loops)); } extern void __bad_udelay(void); diff --git a/arch/arc/include/asm/dma-mapping.h b/arch/arc/include/asm/dma-mapping.h index 45b8e0cea176..fd6cdb56d4fd 100644 --- a/arch/arc/include/asm/dma-mapping.h +++ b/arch/arc/include/asm/dma-mapping.h @@ -14,23 +14,6 @@ #include <asm-generic/dma-coherent.h> #include <asm/cacheflush.h> -#ifndef CONFIG_ARC_PLAT_NEEDS_CPU_TO_DMA -/* - * dma_map_* API take cpu addresses, which is kernel logical address in the - * untranslated address space (0x8000_0000) based. The dma address (bus addr) - * ideally needs to be 0x0000_0000 based hence these glue routines. - * However given that intermediate bus bridges can ignore the high bit, we can - * do with these routines being no-ops. - * If a platform/device comes up which sriclty requires 0 based bus addr - * (e.g. AHB-PCI bridge on Angel4 board), then it can provide it's own versions - */ -#define plat_dma_addr_to_kernel(dev, addr) ((unsigned long)(addr)) -#define plat_kernel_addr_to_dma(dev, ptr) ((dma_addr_t)(ptr)) - -#else -#include <plat/dma_addr.h> -#endif - void *dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); @@ -94,7 +77,7 @@ dma_map_single(struct device *dev, void *cpu_addr, size_t size, enum dma_data_direction dir) { _dma_cache_sync((unsigned long)cpu_addr, size, dir); - return plat_kernel_addr_to_dma(dev, cpu_addr); + return (dma_addr_t)cpu_addr; } static inline void @@ -147,16 +130,14 @@ static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) { - _dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle), size, - DMA_FROM_DEVICE); + _dma_cache_sync(dma_handle, size, DMA_FROM_DEVICE); } static inline void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) { - _dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle), size, - DMA_TO_DEVICE); + _dma_cache_sync(dma_handle, size, DMA_TO_DEVICE); } static inline void @@ -164,8 +145,7 @@ dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - _dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle) + offset, - size, DMA_FROM_DEVICE); + _dma_cache_sync(dma_handle + offset, size, DMA_FROM_DEVICE); } static inline void @@ -173,8 +153,7 @@ dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - _dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle) + offset, - size, DMA_TO_DEVICE); + _dma_cache_sync(dma_handle + offset, size, DMA_TO_DEVICE); } static inline void diff --git a/arch/arc/include/asm/elf.h b/arch/arc/include/asm/elf.h index a26282857683..51a99e25fe33 100644 --- a/arch/arc/include/asm/elf.h +++ b/arch/arc/include/asm/elf.h @@ -15,6 +15,11 @@ /* These ELF defines belong to uapi but libc elf.h already defines them */ #define EM_ARCOMPACT 93 +#define EM_ARCV2 195 /* ARCv2 Cores */ + +#define EM_ARC_INUSE (IS_ENABLED(CONFIG_ISA_ARCOMPACT) ? \ + EM_ARCOMPACT : EM_ARCV2) + /* ARC Relocations (kernel Modules only) */ #define R_ARC_32 0x4 #define R_ARC_32_ME 0x1B diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h new file mode 100644 index 000000000000..b5ff87e6f4b7 --- /dev/null +++ b/arch/arc/include/asm/entry-arcv2.h @@ -0,0 +1,190 @@ + +#ifndef __ASM_ARC_ENTRY_ARCV2_H +#define __ASM_ARC_ENTRY_ARCV2_H + +#include <asm/asm-offsets.h> +#include <asm/irqflags-arcv2.h> +#include <asm/thread_info.h> /* For THREAD_SIZE */ + +/*------------------------------------------------------------------------*/ +.macro INTERRUPT_PROLOGUE called_from + + ; Before jumping to Interrupt Vector, hardware micro-ops did following: + ; 1. SP auto-switched to kernel mode stack + ; 2. STATUS32.Z flag set to U mode at time of interrupt (U:1, K:0) + ; 3. Auto saved: r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI, PC, STAT32 + ; + ; Now manually save: r12, sp, fp, gp, r25 + + PUSH r12 + + ; Saving pt_regs->sp correctly requires some extra work due to the way + ; Auto stack switch works + ; - U mode: retrieve it from AUX_USER_SP + ; - K mode: add the offset from current SP where H/w starts auto push + ; + ; Utilize the fact that Z bit is set if Intr taken in U mode + mov.nz r9, sp + add.nz r9, r9, SZ_PT_REGS - PT_sp - 4 + bnz 1f + + lr r9, [AUX_USER_SP] +1: + PUSH r9 ; SP + + PUSH fp + PUSH gp + +#ifdef CONFIG_ARC_CURR_IN_REG + PUSH r25 ; user_r25 + GET_CURR_TASK_ON_CPU r25 +#else + sub sp, sp, 4 +#endif + +.ifnc \called_from, exception + sub sp, sp, 12 ; BTA/ECR/orig_r0 placeholder per pt_regs +.endif + +.endm + +/*------------------------------------------------------------------------*/ +.macro INTERRUPT_EPILOGUE called_from + +.ifnc \called_from, exception + add sp, sp, 12 ; skip BTA/ECR/orig_r0 placeholderss +.endif + +#ifdef CONFIG_ARC_CURR_IN_REG + POP r25 +#else + add sp, sp, 4 +#endif + + POP gp + POP fp + + ; Don't touch AUX_USER_SP if returning to K mode (Z bit set) + ; (Z bit set on K mode is inverse of INTERRUPT_PROLOGUE) + add.z sp, sp, 4 + bz 1f + + POPAX AUX_USER_SP +1: + POP r12 + +.endm + +/*------------------------------------------------------------------------*/ +.macro EXCEPTION_PROLOGUE + + ; Before jumping to Exception Vector, hardware micro-ops did following: + ; 1. SP auto-switched to kernel mode stack + ; 2. STATUS32.Z flag set to U mode at time of interrupt (U:1,K:0) + ; + ; Now manually save the complete reg file + + PUSH r9 ; freeup a register: slot of erstatus + + PUSHAX eret + sub sp, sp, 12 ; skip JLI, LDI, EI + PUSH lp_count + PUSHAX lp_start + PUSHAX lp_end + PUSH blink + + PUSH r11 + PUSH r10 + + ld.as r9, [sp, 10] ; load stashed r9 (status32 stack slot) + lr r10, [erstatus] + st.as r10, [sp, 10] ; save status32 at it's right stack slot + + PUSH r9 + PUSH r8 + PUSH r7 + PUSH r6 + PUSH r5 + PUSH r4 + PUSH r3 + PUSH r2 + PUSH r1 + PUSH r0 + + ; -- for interrupts, regs above are auto-saved by h/w in that order -- + ; Now do what ISR prologue does (manually save r12, sp, fp, gp, r25) + ; + ; Set Z flag if this was from U mode (expected by INTERRUPT_PROLOGUE) + ; Although H/w exception micro-ops do set Z flag for U mode (just like + ; for interrupts), it could get clobbered in case we soft land here from + ; a TLB Miss exception handler (tlbex.S) + + and r10, r10, STATUS_U_MASK + xor.f 0, r10, STATUS_U_MASK + + INTERRUPT_PROLOGUE exception + + PUSHAX erbta + PUSHAX ecr ; r9 contains ECR, expected by EV_Trap + + PUSH r0 ; orig_r0 +.endm + +/*------------------------------------------------------------------------*/ +.macro EXCEPTION_EPILOGUE + + ; Assumes r0 has PT_status32 + btst r0, STATUS_U_BIT ; Z flag set if K, used in INTERRUPT_EPILOGUE + + add sp, sp, 8 ; orig_r0/ECR don't need restoring + POPAX erbta + + INTERRUPT_EPILOGUE exception + + POP r0 + POP r1 + POP r2 + POP r3 + POP r4 + POP r5 + POP r6 + POP r7 + POP r8 + POP r9 + POP r10 + POP r11 + + POP blink + POPAX lp_end + POPAX lp_start + + POP r9 + mov lp_count, r9 + + add sp, sp, 12 ; skip JLI, LDI, EI + POPAX eret + POPAX erstatus + + ld.as r9, [sp, -12] ; reload r9 which got clobbered +.endm + +.macro FAKE_RET_FROM_EXCPN + lr r9, [status32] + bic r9, r9, (STATUS_U_MASK|STATUS_DE_MASK|STATUS_AE_MASK) + or r9, r9, (STATUS_L_MASK|STATUS_IE_MASK) + kflag r9 +.endm + +/* Get thread_info of "current" tsk */ +.macro GET_CURR_THR_INFO_FROM_SP reg + bmskn \reg, sp, THREAD_SHIFT - 1 +.endm + +/* Get CPU-ID of this core */ +.macro GET_CPU_ID reg + lr \reg, [identity] + xbfu \reg, \reg, 0xE8 /* 00111 01000 */ + /* M = 8-1 N = 8 */ +.endm + +#endif diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h new file mode 100644 index 000000000000..415443c2a8c4 --- /dev/null +++ b/arch/arc/include/asm/entry-compact.h @@ -0,0 +1,307 @@ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Vineetg: March 2009 (Supporting 2 levels of Interrupts) + * Stack switching code can no longer reliably rely on the fact that + * if we are NOT in user mode, stack is switched to kernel mode. + * e.g. L2 IRQ interrupted a L1 ISR which had not yet completed + * it's prologue including stack switching from user mode + * + * Vineetg: Aug 28th 2008: Bug #94984 + * -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap + * Normally CPU does this automatically, however when doing FAKE rtie, + * we also need to explicitly do this. The problem in macros + * FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit + * was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context + * + * Vineetg: May 5th 2008 + * -Modified CALLEE_REG save/restore macros to handle the fact that + * r25 contains the kernel current task ptr + * - Defined Stack Switching Macro to be reused in all intr/excp hdlrs + * - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the + * address Write back load ld.ab instead of seperate ld/add instn + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef __ASM_ARC_ENTRY_COMPACT_H +#define __ASM_ARC_ENTRY_COMPACT_H + +#include <asm/asm-offsets.h> +#include <asm/irqflags-compact.h> +#include <asm/thread_info.h> /* For THREAD_SIZE */ + +/*-------------------------------------------------------------- + * Switch to Kernel Mode stack if SP points to User Mode stack + * + * Entry : r9 contains pre-IRQ/exception/trap status32 + * Exit : SP set to K mode stack + * SP at the time of entry (K/U) saved @ pt_regs->sp + * Clobbers: r9 + *-------------------------------------------------------------*/ + +.macro SWITCH_TO_KERNEL_STK + + /* User Mode when this happened ? Yes: Proceed to switch stack */ + bbit1 r9, STATUS_U_BIT, 88f + + /* OK we were already in kernel mode when this event happened, thus can + * assume SP is kernel mode SP. _NO_ need to do any stack switching + */ + +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS + /* However.... + * If Level 2 Interrupts enabled, we may end up with a corner case: + * 1. User Task executing + * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode) + * 3. But before it could switch SP from USER to KERNEL stack + * a L2 IRQ "Interrupts" L1 + * Thay way although L2 IRQ happened in Kernel mode, stack is still + * not switched. + * To handle this, we may need to switch stack even if in kernel mode + * provided SP has values in range of USER mode stack ( < 0x7000_0000 ) + */ + brlo sp, VMALLOC_START, 88f + + /* TODO: vineetg: + * We need to be a bit more cautious here. What if a kernel bug in + * L1 ISR, caused SP to go whaco (some small value which looks like + * USER stk) and then we take L2 ISR. + * Above brlo alone would treat it as a valid L1-L2 sceanrio + * instead of shouting alound + * The only feasible way is to make sure this L2 happened in + * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in + * L1 ISR before it switches stack + */ + +#endif + + /*------Intr/Ecxp happened in kernel mode, SP already setup ------ */ + /* save it nevertheless @ pt_regs->sp for uniformity */ + + b.d 66f + st sp, [sp, PT_sp - SZ_PT_REGS] + +88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */ + + GET_CURR_TASK_ON_CPU r9 + + /* With current tsk in r9, get it's kernel mode stack base */ + GET_TSK_STACK_BASE r9, r9 + + /* save U mode SP @ pt_regs->sp */ + st sp, [r9, PT_sp - SZ_PT_REGS] + + /* final SP switch */ + mov sp, r9 +66: +.endm + +/*------------------------------------------------------------ + * "FAKE" a rtie to return from CPU Exception context + * This is to re-enable Exceptions within exception + * Look at EV_ProtV to see how this is actually used + *-------------------------------------------------------------*/ + +.macro FAKE_RET_FROM_EXCPN + + ld r9, [sp, PT_status32] + bic r9, r9, (STATUS_U_MASK|STATUS_DE_MASK) + bset r9, r9, STATUS_L_BIT + sr r9, [erstatus] + mov r9, 55f + sr r9, [eret] + + rtie +55: +.endm + +/*-------------------------------------------------------------- + * For early Exception/ISR Prologue, a core reg is temporarily needed to + * code the rest of prolog (stack switching). This is done by stashing + * it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP). + * + * Before saving the full regfile - this reg is restored back, only + * to be saved again on kernel mode stack, as part of pt_regs. + *-------------------------------------------------------------*/ +.macro PROLOG_FREEUP_REG reg, mem +#ifdef CONFIG_SMP + sr \reg, [ARC_REG_SCRATCH_DATA0] +#else + st \reg, [\mem] +#endif +.endm + +.macro PROLOG_RESTORE_REG reg, mem +#ifdef CONFIG_SMP + lr \reg, [ARC_REG_SCRATCH_DATA0] +#else + ld \reg, [\mem] +#endif +.endm + +/*-------------------------------------------------------------- + * Exception Entry prologue + * -Switches stack to K mode (if not already) + * -Saves the register file + * + * After this it is safe to call the "C" handlers + *-------------------------------------------------------------*/ +.macro EXCEPTION_PROLOGUE + + /* Need at least 1 reg to code the early exception prologue */ + PROLOG_FREEUP_REG r9, @ex_saved_reg1 + + /* U/K mode at time of exception (stack not switched if already K) */ + lr r9, [erstatus] + + /* ARC700 doesn't provide auto-stack switching */ + SWITCH_TO_KERNEL_STK + +#ifdef CONFIG_ARC_CURR_IN_REG + /* Treat r25 as scratch reg (save on stack) and load with "current" */ + PUSH r25 + GET_CURR_TASK_ON_CPU r25 +#else + sub sp, sp, 4 +#endif + + st.a r0, [sp, -8] /* orig_r0 needed for syscall (skip ECR slot) */ + sub sp, sp, 4 /* skip pt_regs->sp, already saved above */ + + /* Restore r9 used to code the early prologue */ + PROLOG_RESTORE_REG r9, @ex_saved_reg1 + + /* now we are ready to save the regfile */ + SAVE_R0_TO_R12 + PUSH gp + PUSH fp + PUSH blink + PUSHAX eret + PUSHAX erstatus + PUSH lp_count + PUSHAX lp_end + PUSHAX lp_start + PUSHAX erbta + + lr r9, [ecr] + st r9, [sp, PT_event] /* EV_Trap expects r9 to have ECR */ +.endm + +/*-------------------------------------------------------------- + * Restore all registers used by system call or Exceptions + * SP should always be pointing to the next free stack element + * when entering this macro. + * + * NOTE: + * + * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg + * for memory load operations. If used in that way interrupts are deffered + * by hardware and that is not good. + *-------------------------------------------------------------*/ +.macro EXCEPTION_EPILOGUE + POPAX erbta + POPAX lp_start + POPAX lp_end + + POP r9 + mov lp_count, r9 ;LD to lp_count is not allowed + + POPAX erstatus + POPAX eret + POP blink + POP fp + POP gp + RESTORE_R12_TO_R0 + + ld sp, [sp] /* restore original sp */ + /* orig_r0, ECR, user_r25 skipped automatically */ +.endm + +/* Dummy ECR values for Interrupts */ +#define event_IRQ1 0x0031abcd +#define event_IRQ2 0x0032abcd + +.macro INTERRUPT_PROLOGUE LVL + + /* free up r9 as scratchpad */ + PROLOG_FREEUP_REG r9, @int\LVL\()_saved_reg + + /* Which mode (user/kernel) was the system in when intr occured */ + lr r9, [status32_l\LVL\()] + + SWITCH_TO_KERNEL_STK + +#ifdef CONFIG_ARC_CURR_IN_REG + /* Treat r25 as scratch reg (save on stack) and load with "current" */ + PUSH r25 + GET_CURR_TASK_ON_CPU r25 +#else + sub sp, sp, 4 +#endif + + PUSH 0x003\LVL\()abcd /* Dummy ECR */ + sub sp, sp, 8 /* skip orig_r0 (not needed) + skip pt_regs->sp, already saved above */ + + /* Restore r9 used to code the early prologue */ + PROLOG_RESTORE_REG r9, @int\LVL\()_saved_reg + + SAVE_R0_TO_R12 + PUSH gp + PUSH fp + PUSH blink + PUSH ilink\LVL\() + PUSHAX status32_l\LVL\() + PUSH lp_count + PUSHAX lp_end + PUSHAX lp_start + PUSHAX bta_l\LVL\() +.endm + +/*-------------------------------------------------------------- + * Restore all registers used by interrupt handlers. + * + * NOTE: + * + * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg + * for memory load operations. If used in that way interrupts are deffered + * by hardware and that is not good. + *-------------------------------------------------------------*/ +.macro INTERRUPT_EPILOGUE LVL + POPAX bta_l\LVL\() + POPAX lp_start + POPAX lp_end + + POP r9 + mov lp_count, r9 ;LD to lp_count is not allowed + + POPAX status32_l\LVL\() + POP ilink\LVL\() + POP blink + POP fp + POP gp + RESTORE_R12_TO_R0 + + ld sp, [sp] /* restore original sp */ + /* orig_r0, ECR, user_r25 skipped automatically */ +.endm + +/* Get thread_info of "current" tsk */ +.macro GET_CURR_THR_INFO_FROM_SP reg + bic \reg, sp, (THREAD_SIZE - 1) +.endm + +/* Get CPU-ID of this core */ +.macro GET_CPU_ID reg + lr \reg, [identity] + lsr \reg, \reg, 8 + bmsk \reg, \reg, 7 +.endm + +#endif /* __ASM_ARC_ENTRY_COMPACT_H */ diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h index 884081099f80..ad7860c5ce15 100644 --- a/arch/arc/include/asm/entry.h +++ b/arch/arc/include/asm/entry.h @@ -1,45 +1,27 @@ /* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Vineetg: March 2009 (Supporting 2 levels of Interrupts) - * Stack switching code can no longer reliably rely on the fact that - * if we are NOT in user mode, stack is switched to kernel mode. - * e.g. L2 IRQ interrupted a L1 ISR which had not yet completed - * it's prologue including stack switching from user mode - * - * Vineetg: Aug 28th 2008: Bug #94984 - * -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap - * Normally CPU does this automatically, however when doing FAKE rtie, - * we also need to explicitly do this. The problem in macros - * FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit - * was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context - * - * Vineetg: May 5th 2008 - * -Modified CALLEE_REG save/restore macros to handle the fact that - * r25 contains the kernel current task ptr - * - Defined Stack Switching Macro to be reused in all intr/excp hdlrs - * - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the - * address Write back load ld.ab instead of seperate ld/add instn - * - * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 */ #ifndef __ASM_ARC_ENTRY_H #define __ASM_ARC_ENTRY_H -#ifdef __ASSEMBLY__ #include <asm/unistd.h> /* For NR_syscalls defination */ -#include <asm/asm-offsets.h> #include <asm/arcregs.h> #include <asm/ptrace.h> #include <asm/processor.h> /* For VMALLOC_START */ -#include <asm/thread_info.h> /* For THREAD_SIZE */ #include <asm/mmu.h> +#ifdef CONFIG_ISA_ARCOMPACT +#include <asm/entry-compact.h> /* ISA specific bits */ +#else +#include <asm/entry-arcv2.h> +#endif + /* Note on the LD/ST addr modes with addr reg wback * * LD.a same as LD.aw @@ -143,8 +125,6 @@ POP r13 .endm -#define OFF_USER_R25_FROM_R24 (SZ_CALLEE_REGS + SZ_PT_REGS - 8)/4 - /*-------------------------------------------------------------- * Collect User Mode callee regs as struct callee_regs - needed by * fork/do_signal/unaligned-access-emulation. @@ -157,12 +137,13 @@ *-------------------------------------------------------------*/ .macro SAVE_CALLEE_SAVED_USER + mov r12, sp ; save SP as ref to pt_regs SAVE_R13_TO_R24 #ifdef CONFIG_ARC_CURR_IN_REG - ; Retrieve orig r25 and save it on stack - ld.as r12, [sp, OFF_USER_R25_FROM_R24] - st.a r12, [sp, -4] + ; Retrieve orig r25 and save it with rest of callee_regs + ld.as r12, [r12, PT_user_r25] + PUSH r12 #else PUSH r25 #endif @@ -209,12 +190,16 @@ .macro RESTORE_CALLEE_SAVED_USER #ifdef CONFIG_ARC_CURR_IN_REG - ld.ab r12, [sp, 4] - st.as r12, [sp, OFF_USER_R25_FROM_R24] + POP r12 #else POP r25 #endif RESTORE_R24_TO_R13 + + ; SP is back to start of pt_regs +#ifdef CONFIG_ARC_CURR_IN_REG + st.as r12, [sp, PT_user_r25] +#endif .endm /*-------------------------------------------------------------- @@ -240,117 +225,6 @@ .endm -/*-------------------------------------------------------------- - * Switch to Kernel Mode stack if SP points to User Mode stack - * - * Entry : r9 contains pre-IRQ/exception/trap status32 - * Exit : SP is set to kernel mode stack pointer - * If CURR_IN_REG, r25 set to "current" task pointer - * Clobbers: r9 - *-------------------------------------------------------------*/ - -.macro SWITCH_TO_KERNEL_STK - - /* User Mode when this happened ? Yes: Proceed to switch stack */ - bbit1 r9, STATUS_U_BIT, 88f - - /* OK we were already in kernel mode when this event happened, thus can - * assume SP is kernel mode SP. _NO_ need to do any stack switching - */ - -#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS - /* However.... - * If Level 2 Interrupts enabled, we may end up with a corner case: - * 1. User Task executing - * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode) - * 3. But before it could switch SP from USER to KERNEL stack - * a L2 IRQ "Interrupts" L1 - * Thay way although L2 IRQ happened in Kernel mode, stack is still - * not switched. - * To handle this, we may need to switch stack even if in kernel mode - * provided SP has values in range of USER mode stack ( < 0x7000_0000 ) - */ - brlo sp, VMALLOC_START, 88f - - /* TODO: vineetg: - * We need to be a bit more cautious here. What if a kernel bug in - * L1 ISR, caused SP to go whaco (some small value which looks like - * USER stk) and then we take L2 ISR. - * Above brlo alone would treat it as a valid L1-L2 sceanrio - * instead of shouting alound - * The only feasible way is to make sure this L2 happened in - * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in - * L1 ISR before it switches stack - */ - -#endif - - /* Save Pre Intr/Exception KERNEL MODE SP on kernel stack - * safe-keeping not really needed, but it keeps the epilogue code - * (SP restore) simpler/uniform. - */ - b.d 66f - mov r9, sp - -88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */ - - GET_CURR_TASK_ON_CPU r9 - - /* With current tsk in r9, get it's kernel mode stack base */ - GET_TSK_STACK_BASE r9, r9 - -66: -#ifdef CONFIG_ARC_CURR_IN_REG - /* - * Treat r25 as scratch reg, save it on stack first - * Load it with current task pointer - */ - st r25, [r9, -4] - GET_CURR_TASK_ON_CPU r25 -#endif - - /* Save Pre Intr/Exception User SP on kernel stack */ - st.a sp, [r9, -16] ; Make room for orig_r0, ECR, user_r25 - - /* CAUTION: - * SP should be set at the very end when we are done with everything - * In case of 2 levels of interrupt we depend on value of SP to assume - * that everything else is done (loading r25 etc) - */ - - /* set SP to point to kernel mode stack */ - mov sp, r9 - - /* ----- Stack Switched to kernel Mode, Now save REG FILE ----- */ - -.endm - -/*------------------------------------------------------------ - * "FAKE" a rtie to return from CPU Exception context - * This is to re-enable Exceptions within exception - * Look at EV_ProtV to see how this is actually used - *-------------------------------------------------------------*/ - -.macro FAKE_RET_FROM_EXCPN reg - - ld \reg, [sp, PT_status32] - bic \reg, \reg, (STATUS_U_MASK|STATUS_DE_MASK) - bset \reg, \reg, STATUS_L_BIT - sr \reg, [erstatus] - mov \reg, 55f - sr \reg, [eret] - - rtie -55: -.endm - -/* - * @reg [OUT] &thread_info of "current" - */ -.macro GET_CURR_THR_INFO_FROM_SP reg - bic \reg, sp, (THREAD_SIZE - 1) -.endm - /* * @reg [OUT] thread_info->flags of "current" */ @@ -359,222 +233,6 @@ ld \reg, [\reg, THREAD_INFO_FLAGS] .endm -/*-------------------------------------------------------------- - * For early Exception Prologue, a core reg is temporarily needed to - * code the rest of prolog (stack switching). This is done by stashing - * it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP). - * - * Before saving the full regfile - this reg is restored back, only - * to be saved again on kernel mode stack, as part of pt_regs. - *-------------------------------------------------------------*/ -.macro EXCPN_PROLOG_FREEUP_REG reg -#ifdef CONFIG_SMP - sr \reg, [ARC_REG_SCRATCH_DATA0] -#else - st \reg, [@ex_saved_reg1] -#endif -.endm - -.macro EXCPN_PROLOG_RESTORE_REG reg -#ifdef CONFIG_SMP - lr \reg, [ARC_REG_SCRATCH_DATA0] -#else - ld \reg, [@ex_saved_reg1] -#endif -.endm - -/*-------------------------------------------------------------- - * Exception Entry prologue - * -Switches stack to K mode (if not already) - * -Saves the register file - * - * After this it is safe to call the "C" handlers - *-------------------------------------------------------------*/ -.macro EXCEPTION_PROLOGUE - - /* Need at least 1 reg to code the early exception prologue */ - EXCPN_PROLOG_FREEUP_REG r9 - - /* U/K mode at time of exception (stack not switched if already K) */ - lr r9, [erstatus] - - /* ARC700 doesn't provide auto-stack switching */ - SWITCH_TO_KERNEL_STK - - /* save the regfile */ - SAVE_ALL_SYS -.endm - -/*-------------------------------------------------------------- - * Save all registers used by Exceptions (TLB Miss, Prot-V, Mem err etc) - * Requires SP to be already switched to kernel mode Stack - * sp points to the next free element on the stack at exit of this macro. - * Registers are pushed / popped in the order defined in struct ptregs - * in asm/ptrace.h - * Note that syscalls are implemented via TRAP which is also a exception - * from CPU's point of view - *-------------------------------------------------------------*/ -.macro SAVE_ALL_SYS - - lr r9, [ecr] - st r9, [sp, 8] /* ECR */ - st r0, [sp, 4] /* orig_r0, needed only for sys calls */ - - /* Restore r9 used to code the early prologue */ - EXCPN_PROLOG_RESTORE_REG r9 - - SAVE_R0_TO_R12 - PUSH gp - PUSH fp - PUSH blink - PUSHAX eret - PUSHAX erstatus - PUSH lp_count - PUSHAX lp_end - PUSHAX lp_start - PUSHAX erbta -.endm - -/*-------------------------------------------------------------- - * Restore all registers used by system call or Exceptions - * SP should always be pointing to the next free stack element - * when entering this macro. - * - * NOTE: - * - * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg - * for memory load operations. If used in that way interrupts are deffered - * by hardware and that is not good. - *-------------------------------------------------------------*/ -.macro RESTORE_ALL_SYS - POPAX erbta - POPAX lp_start - POPAX lp_end - - POP r9 - mov lp_count, r9 ;LD to lp_count is not allowed - - POPAX erstatus - POPAX eret - POP blink - POP fp - POP gp - RESTORE_R12_TO_R0 - - ld sp, [sp] /* restore original sp */ - /* orig_r0, ECR, user_r25 skipped automatically */ -.endm - - -/*-------------------------------------------------------------- - * Save all registers used by interrupt handlers. - *-------------------------------------------------------------*/ -.macro SAVE_ALL_INT1 - - /* restore original r9 to be saved as part of reg-file */ -#ifdef CONFIG_SMP - lr r9, [ARC_REG_SCRATCH_DATA0] -#else - ld r9, [@int1_saved_reg] -#endif - - /* now we are ready to save the remaining context :) */ - st event_IRQ1, [sp, 8] /* Dummy ECR */ - st 0, [sp, 4] /* orig_r0 , N/A for IRQ */ - - SAVE_R0_TO_R12 - PUSH gp - PUSH fp - PUSH blink - PUSH ilink1 - PUSHAX status32_l1 - PUSH lp_count - PUSHAX lp_end - PUSHAX lp_start - PUSHAX bta_l1 -.endm - -.macro SAVE_ALL_INT2 - - /* TODO-vineetg: SMP we can't use global nor can we use - * SCRATCH0 as we do for int1 because while int1 is using - * it, int2 can come - */ - /* retsore original r9 , saved in sys_saved_r9 */ - ld r9, [@int2_saved_reg] - - /* now we are ready to save the remaining context :) */ - st event_IRQ2, [sp, 8] /* Dummy ECR */ - st 0, [sp, 4] /* orig_r0 , N/A for IRQ */ - - SAVE_R0_TO_R12 - PUSH gp - PUSH fp - PUSH blink - PUSH ilink2 - PUSHAX status32_l2 - PUSH lp_count - PUSHAX lp_end - PUSHAX lp_start - PUSHAX bta_l2 -.endm - -/*-------------------------------------------------------------- - * Restore all registers used by interrupt handlers. - * - * NOTE: - * - * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg - * for memory load operations. If used in that way interrupts are deffered - * by hardware and that is not good. - *-------------------------------------------------------------*/ - -.macro RESTORE_ALL_INT1 - POPAX bta_l1 - POPAX lp_start - POPAX lp_end - - POP r9 - mov lp_count, r9 ;LD to lp_count is not allowed - - POPAX status32_l1 - POP ilink1 - POP blink - POP fp - POP gp - RESTORE_R12_TO_R0 - - ld sp, [sp] /* restore original sp */ - /* orig_r0, ECR, user_r25 skipped automatically */ -.endm - -.macro RESTORE_ALL_INT2 - POPAX bta_l2 - POPAX lp_start - POPAX lp_end - - POP r9 - mov lp_count, r9 ;LD to lp_count is not allowed - - POPAX status32_l2 - POP ilink2 - POP blink - POP fp - POP gp - RESTORE_R12_TO_R0 - - ld sp, [sp] /* restore original sp */ - /* orig_r0, ECR, user_r25 skipped automatically */ -.endm - - -/* Get CPU-ID of this core */ -.macro GET_CPU_ID reg - lr \reg, [identity] - lsr \reg, \reg, 8 - bmsk \reg, \reg, 7 -.endm - #ifdef CONFIG_SMP /*------------------------------------------------- @@ -643,6 +301,4 @@ #endif /* CONFIG_ARC_CURR_IN_REG */ -#endif /* __ASSEMBLY__ */ - #endif /* __ASM_ARC_ENTRY_H */ diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h index 7cc4ced5dbf4..694ece8a0243 100644 --- a/arch/arc/include/asm/io.h +++ b/arch/arc/include/asm/io.h @@ -99,9 +99,45 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr) } -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl +#ifdef CONFIG_ISA_ARCV2 +#include <asm/barrier.h> +#define __iormb() rmb() +#define __iowmb() wmb() +#else +#define __iormb() do { } while (0) +#define __iowmb() do { } while (0) +#endif + +/* + * MMIO can also get buffered/optimized in micro-arch, so barriers needed + * Based on ARM model for the typical use case + * + * <ST [DMA buffer]> + * <writel MMIO "go" reg> + * or: + * <readl MMIO "status" reg> + * <LD [DMA buffer]> + * + * http://lkml.kernel.org/r/20150622133656.GG1583@arm.com + */ +#define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) +#define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) +#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; }) + +#define writeb(v,c) ({ __iowmb(); writeb_relaxed(v,c); }) +#define writew(v,c) ({ __iowmb(); writew_relaxed(v,c); }) +#define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); }) + +/* + * Relaxed API for drivers which can handle any ordering themselves + */ +#define readb_relaxed(c) __raw_readb(c) +#define readw_relaxed(c) __raw_readw(c) +#define readl_relaxed(c) __raw_readl(c) + +#define writeb_relaxed(v,c) __raw_writeb(v,c) +#define writew_relaxed(v,c) __raw_writew(v,c) +#define writel_relaxed(v,c) __raw_writel(v,c) #include <asm-generic/io.h> diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index f38652fb2ed7..bc5103637326 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -13,8 +13,14 @@ #define NR_IRQS 128 /* allow some CPU external IRQ handling */ /* Platform Independent IRQs */ +#ifdef CONFIG_ISA_ARCOMPACT #define TIMER0_IRQ 3 #define TIMER1_IRQ 4 +#else +#define TIMER0_IRQ 16 +#define TIMER1_IRQ 17 +#define IPI_IRQ 19 +#endif #include <linux/interrupt.h> #include <asm-generic/irq.h> diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h new file mode 100644 index 000000000000..ad481c24070d --- /dev/null +++ b/arch/arc/include/asm/irqflags-arcv2.h @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_IRQFLAGS_ARCV2_H +#define __ASM_IRQFLAGS_ARCV2_H + +#include <asm/arcregs.h> + +/* status32 Bits */ +#define STATUS_AD_BIT 19 /* Disable Align chk: core supports non-aligned */ +#define STATUS_IE_BIT 31 + +#define STATUS_AD_MASK (1<<STATUS_AD_BIT) +#define STATUS_IE_MASK (1<<STATUS_IE_BIT) + +#define AUX_USER_SP 0x00D +#define AUX_IRQ_CTRL 0x00E +#define AUX_IRQ_ACT 0x043 /* Active Intr across all levels */ +#define AUX_IRQ_LVL_PEND 0x200 /* Pending Intr across all levels */ +#define AUX_IRQ_PRIORITY 0x206 +#define ICAUSE 0x40a +#define AUX_IRQ_SELECT 0x40b +#define AUX_IRQ_ENABLE 0x40c + +/* Was Intr taken in User Mode */ +#define AUX_IRQ_ACT_BIT_U 31 + +/* 0 is highest level, but taken by FIRQs, if present in design */ +#define ARCV2_IRQ_DEF_PRIO 0 + +/* seed value for status register */ +#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \ + (ARCV2_IRQ_DEF_PRIO << 1)) + +#ifndef __ASSEMBLY__ + +/* + * Save IRQ state and disable IRQs + */ +static inline long arch_local_irq_save(void) +{ + unsigned long flags; + + __asm__ __volatile__(" clri %0 \n" : "=r" (flags) : : "memory"); + + return flags; +} + +/* + * restore saved IRQ state + */ +static inline void arch_local_irq_restore(unsigned long flags) +{ + __asm__ __volatile__(" seti %0 \n" : : "r" (flags) : "memory"); +} + +/* + * Unconditionally Enable IRQs + */ +static inline void arch_local_irq_enable(void) +{ + unsigned int irqact = read_aux_reg(AUX_IRQ_ACT); + + if (irqact & 0xffff) + write_aux_reg(AUX_IRQ_ACT, irqact & ~0xffff); + + __asm__ __volatile__(" seti \n" : : : "memory"); +} + +/* + * Unconditionally Disable IRQs + */ +static inline void arch_local_irq_disable(void) +{ + __asm__ __volatile__(" clri \n" : : : "memory"); +} + +/* + * save IRQ state + */ +static inline long arch_local_save_flags(void) +{ + unsigned long temp; + + __asm__ __volatile__( + " lr %0, [status32] \n" + : "=&r"(temp) + : + : "memory"); + + return temp; +} + +/* + * Query IRQ state + */ +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & (STATUS_IE_MASK)); +} + +static inline int arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#else + +.macro IRQ_DISABLE scratch + clri +.endm + +.macro IRQ_ENABLE scratch + seti +.endm + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h new file mode 100644 index 000000000000..aa805575c320 --- /dev/null +++ b/arch/arc/include/asm/irqflags-compact.h @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_IRQFLAGS_ARCOMPACT_H +#define __ASM_IRQFLAGS_ARCOMPACT_H + +/* vineetg: March 2010 : local_irq_save( ) optimisation + * -Remove explicit mov of current status32 into reg, that is not needed + * -Use BIC insn instead of INVERTED + AND + * -Conditionally disable interrupts (if they are not enabled, don't disable) +*/ + +#include <asm/arcregs.h> + +/* status32 Reg bits related to Interrupt Handling */ +#define STATUS_E1_BIT 1 /* Int 1 enable */ +#define STATUS_E2_BIT 2 /* Int 2 enable */ +#define STATUS_A1_BIT 3 /* Int 1 active */ +#define STATUS_A2_BIT 4 /* Int 2 active */ + +#define STATUS_E1_MASK (1<<STATUS_E1_BIT) +#define STATUS_E2_MASK (1<<STATUS_E2_BIT) +#define STATUS_A1_MASK (1<<STATUS_A1_BIT) +#define STATUS_A2_MASK (1<<STATUS_A2_BIT) +#define STATUS_IE_MASK (STATUS_E1_MASK | STATUS_E2_MASK) + +/* Other Interrupt Handling related Aux regs */ +#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */ +#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */ +#define AUX_IRQ_LV12 0x43 /* interrupt level register */ + +#define AUX_IENABLE 0x40c +#define AUX_ITRIGGER 0x40d +#define AUX_IPULSE 0x415 + +#define ISA_INIT_STATUS_BITS STATUS_IE_MASK + +#ifndef __ASSEMBLY__ + +/****************************************************************** + * IRQ Control Macros + * + * All of them have "memory" clobber (compiler barrier) which is needed to + * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available) + * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register) + * + * Noted at the time of Abilis Timer List corruption + * Orig Bug + Rejected solution : https://lkml.org/lkml/2013/3/29/67 + * Reasoning : https://lkml.org/lkml/2013/4/8/15 + * + ******************************************************************/ + +/* + * Save IRQ state and disable IRQs + */ +static inline long arch_local_irq_save(void) +{ + unsigned long temp, flags; + + __asm__ __volatile__( + " lr %1, [status32] \n" + " bic %0, %1, %2 \n" + " and.f 0, %1, %2 \n" + " flag.nz %0 \n" + : "=r"(temp), "=r"(flags) + : "n"((STATUS_E1_MASK | STATUS_E2_MASK)) + : "memory", "cc"); + + return flags; +} + +/* + * restore saved IRQ state + */ +static inline void arch_local_irq_restore(unsigned long flags) +{ + + __asm__ __volatile__( + " flag %0 \n" + : + : "r"(flags) + : "memory"); +} + +/* + * Unconditionally Enable IRQs + */ +extern void arch_local_irq_enable(void); + +/* + * Unconditionally Disable IRQs + */ +static inline void arch_local_irq_disable(void) +{ + unsigned long temp; + + __asm__ __volatile__( + " lr %0, [status32] \n" + " and %0, %0, %1 \n" + " flag %0 \n" + : "=&r"(temp) + : "n"(~(STATUS_E1_MASK | STATUS_E2_MASK)) + : "memory"); +} + +/* + * save IRQ state + */ +static inline long arch_local_save_flags(void) +{ + unsigned long temp; + + __asm__ __volatile__( + " lr %0, [status32] \n" + : "=&r"(temp) + : + : "memory"); + + return temp; +} + +/* + * Query IRQ state + */ +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & (STATUS_E1_MASK +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS + | STATUS_E2_MASK +#endif + )); +} + +static inline int arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#else + +#ifdef CONFIG_TRACE_IRQFLAGS + +.macro TRACE_ASM_IRQ_DISABLE + bl trace_hardirqs_off +.endm + +.macro TRACE_ASM_IRQ_ENABLE + bl trace_hardirqs_on +.endm + +#else + +.macro TRACE_ASM_IRQ_DISABLE +.endm + +.macro TRACE_ASM_IRQ_ENABLE +.endm + +#endif + +.macro IRQ_DISABLE scratch + lr \scratch, [status32] + bic \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) + flag \scratch + TRACE_ASM_IRQ_DISABLE +.endm + +.macro IRQ_ENABLE scratch + lr \scratch, [status32] + or \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) + flag \scratch + TRACE_ASM_IRQ_ENABLE +.endm + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h index 27ecc6975a58..59bc6a64f75d 100644 --- a/arch/arc/include/asm/irqflags.h +++ b/arch/arc/include/asm/irqflags.h @@ -1,4 +1,5 @@ /* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) * * This program is free software; you can redistribute it and/or modify @@ -9,171 +10,10 @@ #ifndef __ASM_ARC_IRQFLAGS_H #define __ASM_ARC_IRQFLAGS_H -/* vineetg: March 2010 : local_irq_save( ) optimisation - * -Remove explicit mov of current status32 into reg, that is not needed - * -Use BIC insn instead of INVERTED + AND - * -Conditionally disable interrupts (if they are not enabled, don't disable) -*/ - -#include <asm/arcregs.h> - -/* status32 Reg bits related to Interrupt Handling */ -#define STATUS_E1_BIT 1 /* Int 1 enable */ -#define STATUS_E2_BIT 2 /* Int 2 enable */ -#define STATUS_A1_BIT 3 /* Int 1 active */ -#define STATUS_A2_BIT 4 /* Int 2 active */ - -#define STATUS_E1_MASK (1<<STATUS_E1_BIT) -#define STATUS_E2_MASK (1<<STATUS_E2_BIT) -#define STATUS_A1_MASK (1<<STATUS_A1_BIT) -#define STATUS_A2_MASK (1<<STATUS_A2_BIT) - -/* Other Interrupt Handling related Aux regs */ -#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */ -#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */ -#define AUX_IRQ_LV12 0x43 /* interrupt level register */ - -#define AUX_IENABLE 0x40c -#define AUX_ITRIGGER 0x40d -#define AUX_IPULSE 0x415 - -#ifndef __ASSEMBLY__ - -/****************************************************************** - * IRQ Control Macros - * - * All of them have "memory" clobber (compiler barrier) which is needed to - * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available) - * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register) - * - * Noted at the time of Abilis Timer List corruption - * Orig Bug + Rejected solution : https://lkml.org/lkml/2013/3/29/67 - * Reasoning : https://lkml.org/lkml/2013/4/8/15 - * - ******************************************************************/ - -/* - * Save IRQ state and disable IRQs - */ -static inline long arch_local_irq_save(void) -{ - unsigned long temp, flags; - - __asm__ __volatile__( - " lr %1, [status32] \n" - " bic %0, %1, %2 \n" - " and.f 0, %1, %2 \n" - " flag.nz %0 \n" - : "=r"(temp), "=r"(flags) - : "n"((STATUS_E1_MASK | STATUS_E2_MASK)) - : "memory", "cc"); - - return flags; -} - -/* - * restore saved IRQ state - */ -static inline void arch_local_irq_restore(unsigned long flags) -{ - - __asm__ __volatile__( - " flag %0 \n" - : - : "r"(flags) - : "memory"); -} - -/* - * Unconditionally Enable IRQs - */ -extern void arch_local_irq_enable(void); - -/* - * Unconditionally Disable IRQs - */ -static inline void arch_local_irq_disable(void) -{ - unsigned long temp; - - __asm__ __volatile__( - " lr %0, [status32] \n" - " and %0, %0, %1 \n" - " flag %0 \n" - : "=&r"(temp) - : "n"(~(STATUS_E1_MASK | STATUS_E2_MASK)) - : "memory"); -} - -/* - * save IRQ state - */ -static inline long arch_local_save_flags(void) -{ - unsigned long temp; - - __asm__ __volatile__( - " lr %0, [status32] \n" - : "=&r"(temp) - : - : "memory"); - - return temp; -} - -/* - * Query IRQ state - */ -static inline int arch_irqs_disabled_flags(unsigned long flags) -{ - return !(flags & (STATUS_E1_MASK -#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS - | STATUS_E2_MASK -#endif - )); -} - -static inline int arch_irqs_disabled(void) -{ - return arch_irqs_disabled_flags(arch_local_save_flags()); -} - -#else - -#ifdef CONFIG_TRACE_IRQFLAGS - -.macro TRACE_ASM_IRQ_DISABLE - bl trace_hardirqs_off -.endm - -.macro TRACE_ASM_IRQ_ENABLE - bl trace_hardirqs_on -.endm - +#ifdef CONFIG_ISA_ARCOMPACT +#include <asm/irqflags-compact.h> #else - -.macro TRACE_ASM_IRQ_DISABLE -.endm - -.macro TRACE_ASM_IRQ_ENABLE -.endm - +#include <asm/irqflags-arcv2.h> #endif -.macro IRQ_DISABLE scratch - lr \scratch, [status32] - bic \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) - flag \scratch - TRACE_ASM_IRQ_DISABLE -.endm - -.macro IRQ_ENABLE scratch - lr \scratch, [status32] - or \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) - flag \scratch - TRACE_ASM_IRQ_ENABLE -.endm - -#endif /* __ASSEMBLY__ */ - #endif diff --git a/arch/arc/include/asm/mcip.h b/arch/arc/include/asm/mcip.h new file mode 100644 index 000000000000..52c11f0bb0e5 --- /dev/null +++ b/arch/arc/include/asm/mcip.h @@ -0,0 +1,94 @@ +/* + * ARConnect IP Support (Multi core enabler: Cross core IPI, RTC ...) + * + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MCIP_H +#define __ASM_MCIP_H + +#ifdef CONFIG_ISA_ARCV2 + +#include <asm/arcregs.h> + +#define ARC_REG_MCIP_BCR 0x0d0 +#define ARC_REG_MCIP_CMD 0x600 +#define ARC_REG_MCIP_WDATA 0x601 +#define ARC_REG_MCIP_READBACK 0x602 + +struct mcip_cmd { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:8, param:16, cmd:8; +#else + unsigned int cmd:8, param:16, pad:8; +#endif + +#define CMD_INTRPT_GENERATE_IRQ 0x01 +#define CMD_INTRPT_GENERATE_ACK 0x02 +#define CMD_INTRPT_READ_STATUS 0x03 +#define CMD_INTRPT_CHECK_SOURCE 0x04 + +/* Semaphore Commands */ +#define CMD_SEMA_CLAIM_AND_READ 0x11 +#define CMD_SEMA_RELEASE 0x12 + +#define CMD_DEBUG_SET_MASK 0x34 +#define CMD_DEBUG_SET_SELECT 0x36 + +#define CMD_GRTC_READ_LO 0x42 +#define CMD_GRTC_READ_HI 0x43 + +#define CMD_IDU_ENABLE 0x71 +#define CMD_IDU_DISABLE 0x72 +#define CMD_IDU_SET_MODE 0x74 +#define CMD_IDU_SET_DEST 0x76 +#define CMD_IDU_SET_MASK 0x7C + +#define IDU_M_TRIG_LEVEL 0x0 +#define IDU_M_TRIG_EDGE 0x1 + +#define IDU_M_DISTRI_RR 0x0 +#define IDU_M_DISTRI_DEST 0x2 +}; + +/* + * MCIP programming model + * + * - Simple commands write {cmd:8,param:16} to MCIP_CMD aux reg + * (param could be irq, common_irq, core_id ...) + * - More involved commands setup MCIP_WDATA with cmd specific data + * before invoking the simple command + */ +static inline void __mcip_cmd(unsigned int cmd, unsigned int param) +{ + struct mcip_cmd buf; + + buf.pad = 0; + buf.cmd = cmd; + buf.param = param; + + WRITE_AUX(ARC_REG_MCIP_CMD, buf); +} + +/* + * Setup additional data for a cmd + * Callers need to lock to ensure atomicity + */ +static inline void __mcip_cmd_data(unsigned int cmd, unsigned int param, + unsigned int data) +{ + write_aux_reg(ARC_REG_MCIP_WDATA, data); + + __mcip_cmd(cmd, param); +} + +extern void mcip_init_early_smp(void); +extern void mcip_init_smp(unsigned int cpu); + +#endif + +#endif diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h index 8c84ae98c337..0f9c3eb5327e 100644 --- a/arch/arc/include/asm/mmu.h +++ b/arch/arc/include/asm/mmu.h @@ -15,24 +15,41 @@ #define CONFIG_ARC_MMU_VER 2 #elif defined(CONFIG_ARC_MMU_V3) #define CONFIG_ARC_MMU_VER 3 +#elif defined(CONFIG_ARC_MMU_V4) +#define CONFIG_ARC_MMU_VER 4 #endif /* MMU Management regs */ #define ARC_REG_MMU_BCR 0x06f +#if (CONFIG_ARC_MMU_VER < 4) #define ARC_REG_TLBPD0 0x405 #define ARC_REG_TLBPD1 0x406 #define ARC_REG_TLBINDEX 0x407 #define ARC_REG_TLBCOMMAND 0x408 #define ARC_REG_PID 0x409 #define ARC_REG_SCRATCH_DATA0 0x418 +#else +#define ARC_REG_TLBPD0 0x460 +#define ARC_REG_TLBPD1 0x461 +#define ARC_REG_TLBINDEX 0x464 +#define ARC_REG_TLBCOMMAND 0x465 +#define ARC_REG_PID 0x468 +#define ARC_REG_SCRATCH_DATA0 0x46c +#endif /* Bits in MMU PID register */ -#define MMU_ENABLE (1 << 31) /* Enable MMU for process */ +#define __TLB_ENABLE (1 << 31) +#define __PROG_ENABLE (1 << 30) +#define MMU_ENABLE (__TLB_ENABLE | __PROG_ENABLE) /* Error code if probe fails */ #define TLB_LKUP_ERR 0x80000000 +#if (CONFIG_ARC_MMU_VER < 4) #define TLB_DUP_ERR (TLB_LKUP_ERR | 0x00000001) +#else +#define TLB_DUP_ERR (TLB_LKUP_ERR | 0x40000000) +#endif /* TLB Commands */ #define TLBWrite 0x1 @@ -45,6 +62,11 @@ #define TLBIVUTLB 0x6 /* explicitly inv uTLBs */ #endif +#if (CONFIG_ARC_MMU_VER >= 4) +#define TLBInsertEntry 0x7 +#define TLBDeleteEntry 0x8 +#endif + #ifndef __ASSEMBLY__ typedef struct { diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 9615fe1701c6..1281718802f7 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -72,8 +72,18 @@ #define _PAGE_READ (1<<3) /* Page has user read perm (H) */ #define _PAGE_ACCESSED (1<<4) /* Page is accessed (S) */ #define _PAGE_MODIFIED (1<<5) /* Page modified (dirty) (S) */ + +#if (CONFIG_ARC_MMU_VER >= 4) +#define _PAGE_WTHRU (1<<7) /* Page cache mode write-thru (H) */ +#endif + #define _PAGE_GLOBAL (1<<8) /* Page is global (H) */ #define _PAGE_PRESENT (1<<9) /* TLB entry is valid (H) */ + +#if (CONFIG_ARC_MMU_VER >= 4) +#define _PAGE_SZ (1<<10) /* Page Size indicator (H) */ +#endif + #define _PAGE_SHARED_CODE (1<<11) /* Shared Code page with cmn vaddr usable for shared TLB entries (H) */ #endif diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index 52312cb5dbe2..ee682d8e0213 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h @@ -77,7 +77,7 @@ struct task_struct; */ #define TSK_K_ESP(tsk) (tsk->thread.ksp) -#define TSK_K_REG(tsk, off) (*((unsigned int *)(TSK_K_ESP(tsk) + \ +#define TSK_K_REG(tsk, off) (*((unsigned long *)(TSK_K_ESP(tsk) + \ sizeof(struct callee_regs) + off))) #define TSK_K_BLINK(tsk) TSK_K_REG(tsk, 4) @@ -100,29 +100,26 @@ extern unsigned int get_wchan(struct task_struct *p); #endif /* !__ASSEMBLY__ */ -/* Kernels Virtual memory area. - * Unlike other architectures(MIPS, sh, cris ) ARC 700 does not have a - * "kernel translated" region (like KSEG2 in MIPS). So we use a upper part - * of the translated bottom 2GB for kernel virtual memory and protect - * these pages from user accesses by disabling Ru, Eu and Wu. +/* + * System Memory Map on ARC + * + * ---------------------------- (lower 2G, Translated) ------------------------- + * 0x0000_0000 0x5FFF_FFFF (user vaddr: TASK_SIZE) + * 0x6000_0000 0x6FFF_FFFF (reserved gutter between U/K) + * 0x7000_0000 0x7FFF_FFFF (kvaddr: vmalloc/modules/pkmap..) + * + * PAGE_OFFSET ---------------- (Upper 2G, Untranslated) ----------------------- + * 0x8000_0000 0xBFFF_FFFF (kernel direct mapped) + * 0xC000_0000 0xFFFF_FFFF (peripheral uncached space) + * ----------------------------------------------------------------------------- */ -#define VMALLOC_SIZE (0x10000000) /* 256M */ -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) -#define VMALLOC_END (PAGE_OFFSET) +#define VMALLOC_START 0x70000000 +#define VMALLOC_SIZE (PAGE_OFFSET - VMALLOC_START) +#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) -/* Most of the architectures seem to be keeping some kind of padding between - * userspace TASK_SIZE and PAGE_OFFSET. i.e TASK_SIZE != PAGE_OFFSET. - */ #define USER_KERNEL_GUTTER 0x10000000 -/* User address space: - * On ARC700, CPU allows the entire lower half of 32 bit address space to be - * translated. Thus potentially 2G (0:0x7FFF_FFFF) could be User vaddr space. - * However we steal 256M for kernel addr (0x7000_0000:0x7FFF_FFFF) and another - * 256M (0x6000_0000:0x6FFF_FFFF) is gutter between user/kernel spaces - * Thus total User vaddr space is (0:0x5FFF_FFFF) - */ -#define TASK_SIZE (PAGE_OFFSET - VMALLOC_SIZE - USER_KERNEL_GUTTER) +#define TASK_SIZE (VMALLOC_START - USER_KERNEL_GUTTER) #define STACK_TOP TASK_SIZE #define STACK_TOP_MAX STACK_TOP diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h index 1bfeec2c0558..91755972b9a2 100644 --- a/arch/arc/include/asm/ptrace.h +++ b/arch/arc/include/asm/ptrace.h @@ -16,6 +16,7 @@ /* THE pt_regs: Defines how regs are saved during entry into kernel */ +#ifdef CONFIG_ISA_ARCOMPACT struct pt_regs { /* Real registers */ @@ -56,6 +57,48 @@ struct pt_regs { long user_r25; }; +#else + +struct pt_regs { + + long orig_r0; + + union { + struct { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned long state:8, ecr_vec:8, + ecr_cause:8, ecr_param:8; +#else + unsigned long ecr_param:8, ecr_cause:8, + ecr_vec:8, state:8; +#endif + }; + unsigned long event; + }; + + long bta; /* bta_l1, bta_l2, erbta */ + + long user_r25; + + long r26; /* gp */ + long fp; + long sp; /* user/kernel sp depending on where we came from */ + + long r12; + + /*------- Below list auto saved by h/w -----------*/ + long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11; + + long blink; + long lp_end, lp_start, lp_count; + + long ei, ldi, jli; + + long ret; + long status32; +}; + +#endif /* Callee saved registers - need to be saved only when you are scheduled out */ diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h index b6a8c2dfbe6e..e1651df6a93d 100644 --- a/arch/arc/include/asm/spinlock.h +++ b/arch/arc/include/asm/spinlock.h @@ -22,24 +22,46 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) { unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__; + /* + * This smp_mb() is technically superfluous, we only need the one + * after the lock for providing the ACQUIRE semantics. + * However doing the "right" thing was regressing hackbench + * so keeping this, pending further investigation + */ + smp_mb(); + __asm__ __volatile__( "1: ex %0, [%1] \n" " breq %0, %2, 1b \n" : "+&r" (tmp) : "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__) : "memory"); + + /* + * ACQUIRE barrier to ensure load/store after taking the lock + * don't "bleed-up" out of the critical section (leak-in is allowed) + * http://www.spinics.net/lists/kernel/msg2010409.html + * + * ARCv2 only has load-load, store-store and all-all barrier + * thus need the full all-all barrier + */ + smp_mb(); } static inline int arch_spin_trylock(arch_spinlock_t *lock) { unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__; + smp_mb(); + __asm__ __volatile__( "1: ex %0, [%1] \n" : "+r" (tmp) : "r"(&(lock->slock)) : "memory"); + smp_mb(); + return (tmp == __ARCH_SPIN_LOCK_UNLOCKED__); } @@ -47,12 +69,22 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock) { unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__; + /* + * RELEASE barrier: given the instructions avail on ARCv2, full barrier + * is the only option + */ + smp_mb(); + __asm__ __volatile__( " ex %0, [%1] \n" : "+r" (tmp) : "r"(&(lock->slock)) : "memory"); + /* + * superfluous, but keeping for now - see pairing version in + * arch_spin_lock above + */ smp_mb(); } diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h index aca0d5a45c7b..3af67455659a 100644 --- a/arch/arc/include/asm/thread_info.h +++ b/arch/arc/include/asm/thread_info.h @@ -25,6 +25,7 @@ #endif #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) +#define THREAD_SHIFT (PAGE_SHIFT << THREAD_SIZE_ORDER) #ifndef __ASSEMBLY__ diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h index 30c9baffa96f..d1da6032b715 100644 --- a/arch/arc/include/asm/uaccess.h +++ b/arch/arc/include/asm/uaccess.h @@ -659,31 +659,30 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n) static inline long __arc_strncpy_from_user(char *dst, const char __user *src, long count) { - long res = count; + long res = 0; char val; - unsigned int hw_count; if (count == 0) return 0; __asm__ __volatile__( - " lp 2f \n" + " lp 3f \n" "1: ldb.ab %3, [%2, 1] \n" - " breq.d %3, 0, 2f \n" + " breq.d %3, 0, 3f \n" " stb.ab %3, [%1, 1] \n" - "2: sub %0, %6, %4 \n" - "3: ;nop \n" + " add %0, %0, 1 # Num of NON NULL bytes copied \n" + "3: \n" " .section .fixup, \"ax\" \n" " .align 4 \n" - "4: mov %0, %5 \n" + "4: mov %0, %4 # sets @res as -EFAULT \n" " j 3b \n" " .previous \n" " .section __ex_table, \"a\" \n" " .align 4 \n" " .word 1b, 4b \n" " .previous \n" - : "=r"(res), "+r"(dst), "+r"(src), "=&r"(val), "=l"(hw_count) - : "g"(-EFAULT), "ir"(count), "4"(count) /* this "4" seeds lp_count */ + : "+r"(res), "+r"(dst), "+r"(src), "=r"(val) + : "g"(-EFAULT), "l"(count) : "memory"); return res; diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h index e5d41e08240c..9d129a2a1351 100644 --- a/arch/arc/include/uapi/asm/page.h +++ b/arch/arc/include/uapi/asm/page.h @@ -30,7 +30,7 @@ #define PAGE_OFFSET (0x80000000) #else #define PAGE_SIZE (1UL << PAGE_SHIFT) /* Default 8K */ -#define PAGE_OFFSET (0x80000000UL) /* Kernel starts at 2G onwards */ +#define PAGE_OFFSET (0x80000000UL) /* Kernel starts at 2G onwards */ #endif #define PAGE_MASK (~(PAGE_SIZE-1)) |