diff options
| author | Jiawen Wu <jiawenwu@trustnetic.com> | 2023-08-23 14:19:29 +0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2023-08-25 07:42:58 +0100 |
| commit | f629acc6f21043fdc80ae93cdafa6713888db0fd (patch) | |
| tree | 653643f82483cc090bee727d2f73e65aaf83e80d /MAINTAINERS | |
| parent | d55595f04dcc8bd6f6ff33f451dda8de3f1232da (diff) | |
net: pcs: xpcs: support to switch mode for Wangxun NICs
According to chapter 6 of DesignWare Cores Ethernet PCS (version 3.20a)
and custom design manual, add a configuration flow for switching interface
mode.
If the interface changes, the following setting is required:
1. wait VR_XS_PCS_DIG_STS bit(4, 2) [PSEQ_STATE] = 100b (Power-Good)
2. write SR_XS_PCS_CTRL2 to select various PCS type
3. write SR_PMA_CTRL1 and/or SR_XS_PCS_CTRL1 for link speed
4. program PMA registers
5. write VR_XS_PCS_DIG_CTRL1 bit(15) [VR_RST] = 1b (Vendor-Specific
Soft Reset)
6. wait for VR_XS_PCS_DIG_CTRL1 bit(15) [VR_RST] to get cleared
Only 10GBASE-R/SGMII/1000BASE-X modes are planned for the current Wangxun
devices. And there is a quirk for Wangxun devices to switch mode although
the interface in phylink state has not changed, since PCS will change to
default 10GBASE-R when the ethernet driver(txgbe) do LAN reset.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'MAINTAINERS')
| -rw-r--r-- | MAINTAINERS | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index dfc2ba0c20f3..5f527a9ae4b2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22925,6 +22925,7 @@ S: Maintained W: https://www.net-swift.com F: Documentation/networking/device_drivers/ethernet/wangxun/* F: drivers/net/ethernet/wangxun/ +F: drivers/net/pcs/pcs-xpcs-wx.c WATCHDOG DEVICE DRIVERS M: Wim Van Sebroeck <wim@linux-watchdog.org> |