Merge tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - new drivers for HPE GXP and Loongson 2K/LS7A

 - bigger refactorings for i801 and xiic

 - gpio driver gained ACPI and SDA-write only support

 - the core converted some OF helpers to fwnode helpers

 - usual bunch of driver updates

* tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
  MAINTAINERS: Add HPE GXP I2C Support
  i2c: Add GXP SoC I2C Controller
  dt-bindings: i2c: Add hpe,gxp-i2c
  i2c: xiic: Remove some dead code
  i2c: xiic: Add SCL frequency configuration support
  i2c: xiic: Update compatible with new IP version
  dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
  i2c: i801: Call i801_check_post() from i801_access()
  i2c: i801: Call i801_check_pre() from i801_access()
  i2c: i801: Centralize configuring block commands in i801_block_transaction
  i2c: i801: Centralize configuring non-block commands in i801_simple_transaction
  i2c: i801: Handle SMBAUXCTL_E32B in i801_block_transaction_by_block only
  i2c: i801: Add i801_simple_transaction(), complementing i801_block_transaction()
  Documentation: i2c: correct spelling
  dt-bindings: i2c: i2c-st: convert to DT schema
  i2c: i801: add helper i801_set_hstadd()
  i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
  i2c: i801: improve interrupt handler
  i2c: st: use pm_sleep_ptr to avoid ifdef CONFIG_PM_SLEEP
  ...

12 files changed, 261 insertions, 61 deletions

diff --git a/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
new file mode 100644
index 000000000000..6604dcd47251
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hpe,gxp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP SoC I2C Controller
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hpe,gxp-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  hpe,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the global status and enable interrupt registers shared
+      between each I2C engine controller instance. It enables the I2C
+      engine controller to act as both a master or slave by being able to
+      arm and respond to interrupts from its engine. Each bit in the
+      registers represent the respective bit position.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2600 {
+        compatible = "hpe,gxp-i2c";
+        reg = <0x2500 0x70>;
+        interrupts = <9>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hpe,sysreg = <&sysreg_system_controller>;
+        clock-frequency = <10000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
index e0d76d5eb103..afd4925c2a7d 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -33,6 +33,10 @@ properties:
       open drain.
     maxItems: 1
 
+  i2c-gpio,sda-output-only:
+    description: sda as output only
+    type: boolean
+
   i2c-gpio,scl-output-only:
     description: scl as output only
     type: boolean
@@ -63,6 +67,28 @@ properties:
       GPIO line used for SCL into open drain mode, and that something is not
       the GPIO chip. It is essentially an inconsistency flag.
 
+  i2c-gpio,sda-has-no-pullup:
+    type: boolean
+    description: sda is used in a non-compliant way and has no pull-up.
+      Therefore disable open-drain. This property is mutually-exclusive
+      with i2c-gpio,sda-open-drain.
+
+  i2c-gpio,scl-has-no-pullup:
+    type: boolean
+    description: scl is used in a non-compliant way and has no pull-up.
+      Therefore disable open-drain. This property is mutually-exclusive
+      with i2c-gpio,scl-open-drain.
+
+dependencies:
+  i2c-gpio,sda-has-no-pullup:
+    not:
+      required:
+        - i2c-gpio,sda-open-drain
+  i2c-gpio,scl-has-no-pullup:
+    not:
+      required:
+        - i2c-gpio,scl-open-drain
+
 required:
   - compatible
   - sda-gpios
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
index 421563bf576c..72ae2e01cf22 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -43,6 +43,10 @@ properties:
           - const: mediatek,mt6577-i2c
       - items:
           - enum:
+              - mediatek,mt8365-i2c
+          - const: mediatek,mt8168-i2c
+      - items:
+          - enum:
               - mediatek,mt8195-i2c
           - const: mediatek,mt8192-i2c
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st.txt b/Documentation/devicetree/bindings/i2c/i2c-st.txt
deleted file mode 100644
index 4c26fda3844a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-st.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-ST SSC binding, for I2C mode operation
-
-Required properties :
-- compatible : Must be "st,comms-ssc-i2c" or "st,comms-ssc4-i2c"
-- reg : Offset and length of the register set for the device
-- interrupts : the interrupt specifier
-- clock-names: Must contain "ssc".
-- clocks: Must contain an entry for each name in clock-names. See the common
-  clock bindings.
-- A pinctrl state named "default" must be defined to set pins in mode of
-  operation for I2C transfer.
-
-Optional properties :
-- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
-  the default 100 kHz frequency will be used. As only Normal and Fast modes
-  are supported, possible values are 100000 and 400000.
-- st,i2c-min-scl-pulse-width-us : The minimum valid SCL pulse width that is
-  allowed through the deglitch circuit. In units of us.
-- st,i2c-min-sda-pulse-width-us : The minimum valid SDA pulse width that is
-  allowed through the deglitch circuit. In units of us.
-- A pinctrl state named "idle" could be defined to set pins in idle state
-  when I2C instance is not performing a transfer.
-- A pinctrl state named "sleep" could be defined to set pins in sleep state
-  when driver enters in suspend.
-
-
-
-Example :
-
-i2c0: i2c@fed40000 {
-	compatible	= "st,comms-ssc4-i2c";
-	reg		= <0xfed40000 0x110>;
-	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-	clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-	clock-names	= "ssc";
-	clock-frequency = <400000>;
-	pinctrl-names	= "default";
-	pinctrl-0	= <&pinctrl_i2c0_default>;
-	st,i2c-min-scl-pulse-width-us = <0>;
-	st,i2c-min-sda-pulse-width-us = <5>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
new file mode 100644
index 000000000000..67882ec6e06a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/loongson,ls2x-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson LS2X I2C Controller
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-i2c
+      - loongson,ls7a-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1fe21000 {
+        compatible = "loongson,ls2k-i2c";
+        reg = <0x1fe21000 0x8>;
+        interrupt-parent = <&extioiic>;
+        interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@57 {
+            compatible = "atmel,24c16";
+            reg = <0x57>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
index cf9f8fda595f..ec79b7270437 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -12,14 +12,24 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,msm8226-cci
-      - qcom,msm8916-cci
-      - qcom,msm8974-cci
-      - qcom,msm8996-cci
-      - qcom,sdm845-cci
-      - qcom,sm8250-cci
-      - qcom,sm8450-cci
+    oneOf:
+      - enum:
+          - qcom,msm8226-cci
+          - qcom,msm8974-cci
+          - qcom,msm8996-cci
+
+      - items:
+          - enum:
+              - qcom,msm8916-cci
+          - const: qcom,msm8226-cci # CCI v1
+
+      - items:
+          - enum:
+              - qcom,sdm845-cci
+              - qcom,sm6350-cci
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+          - const: qcom,msm8996-cci # CCI v2
 
   "#address-cells":
     const: 1
@@ -88,10 +98,12 @@ allOf:
   - if:
       properties:
         compatible:
-          contains:
-            enum:
-              - qcom,msm8226-cci
-              - qcom,msm8974-cci
+          oneOf:
+            - contains:
+                enum:
+                  - qcom,msm8974-cci
+
+            - const: qcom,msm8226-cci
     then:
       properties:
         clocks:
@@ -105,10 +117,12 @@ allOf:
   - if:
       properties:
         compatible:
-          contains:
-            enum:
-              - qcom,msm8916-cci
-              - qcom,msm8996-cci
+          oneOf:
+            - contains:
+                enum:
+                  - qcom,msm8916-cci
+
+            - const: qcom,msm8996-cci
     then:
       properties:
         clocks:
@@ -126,6 +140,7 @@ allOf:
           contains:
             enum:
               - qcom,sdm845-cci
+              - qcom,sm6350-cci
     then:
       properties:
         clocks:
@@ -169,7 +184,7 @@ examples:
 
     cci@ac4a000 {
         reg = <0x0ac4a000 0x4000>;
-        compatible = "qcom,sdm845-cci";
+        compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
index c76131902b77..4bbe9e775da1 100644
--- a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
@@ -29,6 +29,9 @@ properties:
     minimum: 100000
     maximum: 400000
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
index ddde08636ab0..5abf496edb59 100644
--- a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
@@ -29,6 +29,9 @@ properties:
     minimum: 100000
     maximum: 400000
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
new file mode 100644
index 000000000000..08f9c1e446fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,sti-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in STMicroelectronics STi platform
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,comms-ssc-i2c
+      - st,comms-ssc4-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+    default: 100000
+
+  st,i2c-min-scl-pulse-width-us:
+    description:
+      The minimum valid SCL pulse width that is allowed through the
+      deglitch circuit. In units of us.
+
+  st,i2c-min-sda-pulse-width-us:
+    description:
+      The minimum valid SDA pulse width that is allowed through the
+      deglitch circuit. In units of us.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+    i2c@fed40000 {
+        compatible = "st,comms-ssc4-i2c";
+        reg = <0xfed40000 0x110>;
+        interrupts =  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_s_a0_ls CLK_ICN_REG>;
+        clock-names = "ssc";
+        clock-frequency = <400000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c0_default>;
+        st,i2c-min-scl-pulse-width-us = <0>;
+        st,i2c-min-sda-pulse-width-us = <5>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 8d241a703d85..1b598638d457 100644
--- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,xps-iic-2.00.a
+    enum:
+      - xlnx,axi-iic-2.1
+      - xlnx,xps-iic-2.00.a
 
   reg:
     maxItems: 1
@@ -30,6 +32,13 @@ properties:
     description: |
       Input clock name.
 
+  clock-frequency:
+    description:
+      Optional I2C SCL clock frequency. If not specified, do not configure
+      in software, rely only on hardware design value.
+    default: 100000
+    enum: [ 100000, 400000, 1000000 ]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/i2c/gpio-fault-injection.rst b/Documentation/i2c/gpio-fault-injection.rst
index 9dca6ec7d266..91d23889abd5 100644
--- a/Documentation/i2c/gpio-fault-injection.rst
+++ b/Documentation/i2c/gpio-fault-injection.rst
@@ -93,7 +93,7 @@ bus arbitration against another master in a multi-master setup.
 ------------------
 
 This file is write only and you need to write the duration of the arbitration
-intereference (in µs, maximum is 100ms). The calling process will then sleep
+interference (in µs, maximum is 100ms). The calling process will then sleep
 and wait for the next bus clock. The process is interruptible, though.
 
 Arbitration lost is achieved by waiting for SCL going down by the master under
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 4942c4cad4ad..adc87456c99d 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -238,7 +238,7 @@ This is implemented in the following way in the Linux kernel:
 * I2C bus drivers trigger SMBus Host Notify by a call to
   i2c_handle_smbus_host_notify().
 * I2C drivers for devices which can trigger SMBus Host Notify will have
-  client->irq assigned to a Host Notify IRQ if noone else specified an other.
+  client->irq assigned to a Host Notify IRQ if no one else specified another.
 
 There is currently no way to retrieve the data parameter from the client.