Merge tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - fix a regression at the CEC adapter core

 - two uAPI patches (one revert) for changes in this development cycle

* tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dt-bindings: media: imx274: Convert to json-schema
  media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag
  media: cec-adap.c: don't use flush_scheduled_work()

5 files changed, 79 insertions, 70 deletions

diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
deleted file mode 100644
index 0727079d2410..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/imx274.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
-
-The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 3864H x 2202V. It is programmable through I2C
-interface. The I2C address is fixed to 0x1a as per sensor data sheet.
-Image data is sent through MIPI CSI-2, which is configured as 4 lanes
-at 1440 Mbps.
-
-
-Required Properties:
-- compatible: value should be "sony,imx274" for imx274 sensor
-- reg: I2C bus address of the device
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
-- clocks: Reference to the input clock.
-- clock-names: Should be "inck".
-- VANA-supply: Sensor 2.8v analog supply.
-- VDIG-supply: Sensor 1.8v digital core supply.
-- VDDL-supply: Sensor digital IO 1.2v supply.
-
-The imx274 device node should contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-	sensor@1a {
-		compatible = "sony,imx274";
-		reg = <0x1a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reset-gpios = <&gpio_sensor 0 0>;
-		port {
-			sensor_out: endpoint {
-				remote-endpoint = <&csiss_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
new file mode 100644
index 000000000000..f697e1a20beb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor
+
+maintainers:
+  - Leon Luo <leonl@leopardimaging.com>
+
+description: |
+  The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an
+  active array size of 3864H x 2202V. It is programmable through I2C interface.
+  Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440
+  Mbps.
+
+properties:
+  compatible:
+    const: sony,imx274
+
+  reg:
+    const: 0x1a
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: inck
+
+  vana-supply:
+    description: Sensor 2.8 V analog supply.
+    maxItems: 1
+
+  vdig-supply:
+    description: Sensor 1.8 V digital core supply.
+    maxItems: 1
+
+  vddl-supply:
+    description: Sensor digital IO 1.2 V supply.
+    maxItems: 1
+
+  port:
+    type: object
+    description: Output video port. See ../video-interfaces.txt.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx274: camera-sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                sensor_out: endpoint {
+                    remote-endpoint = <&csiss_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst
index 57e752aaf414..2044ed13cd9d 100644
--- a/Documentation/userspace-api/media/v4l/buffer.rst
+++ b/Documentation/userspace-api/media/v4l/buffer.rst
@@ -701,23 +701,6 @@ Memory Consistency Flags
     :stub-columns: 0
     :widths:       3 1 4
 
-    * .. _`V4L2-FLAG-MEMORY-NON-CONSISTENT`:
-
-      - ``V4L2_FLAG_MEMORY_NON_CONSISTENT``
-      - 0x00000001
-      - A buffer is allocated either in consistent (it will be automatically
-	coherent between the CPU and the bus) or non-consistent memory. The
-	latter can provide performance gains, for instance the CPU cache
-	sync/flush operations can be avoided if the buffer is accessed by the
-	corresponding device only and the CPU does not read/write to/from that
-	buffer. However, this requires extra care from the driver -- it must
-	guarantee memory consistency by issuing a cache flush/sync when
-	consistency is needed. If this flag is set V4L2 will attempt to
-	allocate the buffer in non-consistent memory. The flag takes effect
-	only if the buffer is used for :ref:`memory mapping <mmap>` I/O and the
-	queue reports the :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
-	<V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability.
-
 .. c:type:: v4l2_memory
 
 enum v4l2_memory
diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
index f2a702870fad..12cf6b44f414 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
@@ -120,13 +120,9 @@ than the number requested.
 	If you want to just query the capabilities without making any
 	other changes, then set ``count`` to 0, ``memory`` to
 	``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type.
-    * - __u32
-      - ``flags``
-      - Specifies additional buffer management attributes.
-	See :ref:`memory-flags`.
 
     * - __u32
-      - ``reserved``\ [6]
+      - ``reserved``\ [7]
       - A place holder for future extensions. Drivers and applications
 	must set the array to zero.
 
diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
index 75d894d9c36c..0e3e2fde65e8 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
@@ -112,17 +112,10 @@ aborting or finishing any DMA in progress, an implicit
 	``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will
 	free any previously allocated buffers, so this is typically something
 	that will be done at the start of the application.
-    * - union {
-      - (anonymous)
-    * - __u32
-      - ``flags``
-      - Specifies additional buffer management attributes.
-	See :ref:`memory-flags`.
     * - __u32
       - ``reserved``\ [1]
-      - Kept for backwards compatibility. Use ``flags`` instead.
-    * - }
-      -
+      - A place holder for future extensions. Drivers and applications
+	must set the array to zero.
 
 .. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
 
@@ -169,7 +162,6 @@ aborting or finishing any DMA in progress, an implicit
       - This capability is set by the driver to indicate that the queue supports
         cache and memory management hints. However, it's only valid when the
         queue is used for :ref:`memory mapping <mmap>` streaming I/O. See
-        :ref:`V4L2_FLAG_MEMORY_NON_CONSISTENT <V4L2-FLAG-MEMORY-NON-CONSISTENT>`,
         :ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and
         :ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`.