Merge 5.10-rc6 into char-misc-next

We need the fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

11 files changed, 172 insertions, 61 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
index a10a4de3e5fe..c4a4497c249a 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
+++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -109,30 +109,6 @@ Description:
 		When counting down the counter start from preset value
 		and fire event when reach 0.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion:	4.12
-Contact:	benjamin.gaignard@st.com
-Description:
-		Reading returns the list possible quadrature modes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion:	4.12
-Contact:	benjamin.gaignard@st.com
-Description:
-		Configure the device counter quadrature modes:
-
-		channel_A:
-			Encoder A input servers as the count input and B as
-			the UP/DOWN direction control input.
-
-		channel_B:
-			Encoder B input serves as the count input and A as
-			the UP/DOWN direction control input.
-
-		quadrature:
-			Encoder A and B inputs are mixed to get direction
-			and count with a scale of 0.25.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
 KernelVersion:	4.12
 Contact:	benjamin.gaignard@st.com
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 526d65d8573a..44fde25bb221 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2858,6 +2858,8 @@
 					       mds=off [X86]
 					       tsx_async_abort=off [X86]
 					       kvm.nx_huge_pages=off [X86]
+					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 
 				Exceptions:
 					       This does not have any effect on
@@ -3186,6 +3188,8 @@
 
 	noefi		Disable EFI runtime services support.
 
+	no_entry_flush  [PPC] Don't flush the L1-D cache when entering the kernel.
+
 	noexec		[IA-64]
 
 	noexec		[X86]
@@ -3235,6 +3239,9 @@
 	nospec_store_bypass_disable
 			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
 
+	no_uaccess_flush
+	                [PPC] Don't flush the L1-D cache after accessing user data.
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst
index 1628862e7024..8d5029ad210a 100644
--- a/Documentation/dev-tools/kunit/faq.rst
+++ b/Documentation/dev-tools/kunit/faq.rst
@@ -90,7 +90,7 @@ things to try.
    re-run kunit_tool.
 5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This
    may help clean up any residual config items which could be causing problems.
-6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be
+6. Finally, try running KUnit outside UML. KUnit and KUnit tests can be
    built into any kernel, or can be built as a module and loaded at runtime.
    Doing so should allow you to determine if UML is causing the issue you're
    seeing. When tests are built-in, they will execute when the kernel boots, and
diff --git a/Documentation/dev-tools/kunit/style.rst b/Documentation/dev-tools/kunit/style.rst
index da1d6f0ed6bc..8dbcdc552606 100644
--- a/Documentation/dev-tools/kunit/style.rst
+++ b/Documentation/dev-tools/kunit/style.rst
@@ -175,17 +175,17 @@ An example Kconfig entry:
 
 .. code-block:: none
 
-        config FOO_KUNIT_TEST
-                tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
-                depends on KUNIT
-                default KUNIT_ALL_TESTS
-                help
-                    This builds unit tests for foo.
+	config FOO_KUNIT_TEST
+		tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
+		depends on KUNIT
+		default KUNIT_ALL_TESTS
+		help
+		  This builds unit tests for foo.
 
-                    For more information on KUnit and unit tests in general, please refer
-                    to the KUnit documentation in Documentation/dev-tools/kunit
+		  For more information on KUnit and unit tests in general, please refer
+		  to the KUnit documentation in Documentation/dev-tools/kunit/.
 
-                    If unsure, say N
+		  If unsure, say N.
 
 
 Test File and Module Names
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index 62142a47488c..9c28c518e6a3 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -92,7 +92,7 @@ behavior of a function called ``add``; the first parameter is always of type
 the second parameter, in this case, is what the value is expected to be; the
 last value is what the value actually is. If ``add`` passes all of these
 expectations, the test case, ``add_test_basic`` will pass; if any one of these
-expectations fail, the test case will fail.
+expectations fails, the test case will fail.
 
 It is important to understand that a test case *fails* when any expectation is
 violated; however, the test will continue running, potentially trying other
@@ -202,7 +202,7 @@ Example:
 	kunit_test_suite(example_test_suite);
 
 In the above example the test suite, ``example_test_suite``, would run the test
-cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``,
+cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``;
 each would have ``example_test_init`` called immediately before it and would
 have ``example_test_exit`` called immediately after it.
 ``kunit_test_suite(example_test_suite)`` registers the test suite with the
@@ -229,7 +229,7 @@ through some sort of indirection where a function is exposed as part of an API
 such that the definition of that function can be changed without affecting the
 rest of the code base. In the kernel this primarily comes from two constructs,
 classes, structs that contain function pointers that are provided by the
-implementer, and architecture specific functions which have definitions selected
+implementer, and architecture-specific functions which have definitions selected
 at compile time.
 
 Classes
@@ -459,7 +459,7 @@ KUnit on non-UML architectures
 By default KUnit uses UML as a way to provide dependencies for code under test.
 Under most circumstances KUnit's usage of UML should be treated as an
 implementation detail of how KUnit works under the hood. Nevertheless, there
-are instances where being able to run architecture specific code or test
+are instances where being able to run architecture-specific code or test
 against real hardware is desirable. For these reasons KUnit supports running on
 other architectures.
 
@@ -599,7 +599,7 @@ writing normal KUnit tests. One special caveat is that you have to reset
 hardware state in between test cases; if this is not possible, you may only be
 able to run one test case per invocation.
 
-.. TODO(brendanhiggins@google.com): Add an actual example of an architecture
+.. TODO(brendanhiggins@google.com): Add an actual example of an architecture-
    dependent KUnit test.
 
 KUnit debugfs representation
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index 03a76729d26c..7ce06f9f9f8e 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -76,6 +76,12 @@ properties:
   resets:
     maxItems: 1
 
+  wifi-2.4ghz-coexistence:
+    type: boolean
+    description: >
+      Should the pixel frequencies in the WiFi frequencies range be
+      avoided?
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt
index fcfd02d8d32f..e498966d436f 100644
--- a/Documentation/devicetree/bindings/sound/rt1015.txt
+++ b/Documentation/devicetree/bindings/sound/rt1015.txt
@@ -8,10 +8,16 @@ Required properties:
 
 - reg : The I2C address of the device.
 
+Optional properties:
+
+- realtek,power-up-delay-ms
+  Set a delay time for flush work to be completed,
+  this value is adjustable depending on platform.
 
 Example:
 
 rt1015: codec@28 {
 	compatible = "realtek,rt1015";
 	reg = <0x28>;
+	realtek,power-up-delay-ms = <50>;
 };
diff --git a/Documentation/driver-api/media/drivers/vidtv.rst b/Documentation/driver-api/media/drivers/vidtv.rst
index 65115448c52d..673bdff919ea 100644
--- a/Documentation/driver-api/media/drivers/vidtv.rst
+++ b/Documentation/driver-api/media/drivers/vidtv.rst
@@ -149,11 +149,11 @@ vidtv_psi.[ch]
 	Because the generator is implemented in a separate file, it can be
 	reused elsewhere in the media subsystem.
 
-	Currently vidtv supports working with 3 PSI tables: PAT, PMT and
-	SDT.
+	Currently vidtv supports working with 5 PSI tables: PAT, PMT,
+	SDT, NIT and EIT.
 
 	The specification for PAT and PMT can be found in *ISO 13818-1:
-	Systems*, while the specification for the SDT can be found in *ETSI
+	Systems*, while the specification for the SDT, NIT, EIT can be found in *ETSI
 	EN 300 468: Specification for Service Information (SI) in DVB
 	systems*.
 
@@ -197,6 +197,8 @@ vidtv_channel.[ch]
 
 	#. Their programs will be concatenated to populate the PAT
 
+	#. Their events will be concatenated to populate the EIT
+
 	#. For each program in the PAT, a PMT section will be created
 
 	#. The PMT section for a channel will be assigned its streams.
@@ -256,6 +258,42 @@ Using dvb-fe-tool
 The first step to check whether the demod loaded successfully is to run::
 
 	$ dvb-fe-tool
+	Device Dummy demod for DVB-T/T2/C/S/S2 (/dev/dvb/adapter0/frontend0) capabilities:
+	    CAN_FEC_1_2
+	    CAN_FEC_2_3
+	    CAN_FEC_3_4
+	    CAN_FEC_4_5
+	    CAN_FEC_5_6
+	    CAN_FEC_6_7
+	    CAN_FEC_7_8
+	    CAN_FEC_8_9
+	    CAN_FEC_AUTO
+	    CAN_GUARD_INTERVAL_AUTO
+	    CAN_HIERARCHY_AUTO
+	    CAN_INVERSION_AUTO
+	    CAN_QAM_16
+	    CAN_QAM_32
+	    CAN_QAM_64
+	    CAN_QAM_128
+	    CAN_QAM_256
+	    CAN_QAM_AUTO
+	    CAN_QPSK
+	    CAN_TRANSMISSION_MODE_AUTO
+	DVB API Version 5.11, Current v5 delivery system: DVBC/ANNEX_A
+	Supported delivery systems:
+	    DVBT
+	    DVBT2
+	    [DVBC/ANNEX_A]
+	    DVBS
+	    DVBS2
+	Frequency range for the current standard:
+	From:            51.0 MHz
+	To:              2.15 GHz
+	Step:            62.5 kHz
+	Tolerance:       29.5 MHz
+	Symbol rate ranges for the current standard:
+	From:            1.00 MBauds
+	To:              45.0 MBauds
 
 This should return what is currently set up at the demod struct, i.e.::
 
@@ -314,7 +352,7 @@ For this, one should provide a configuration file known as a 'scan file',
 here's an example::
 
 	[Channel]
-	FREQUENCY = 330000000
+	FREQUENCY = 474000000
 	MODULATION = QAM/AUTO
 	SYMBOL_RATE = 6940000
 	INNER_FEC = AUTO
@@ -335,6 +373,14 @@ You can browse scan tables online here: `dvb-scan-tables
 Assuming this channel is named 'channel.conf', you can then run::
 
 	$ dvbv5-scan channel.conf
+	dvbv5-scan ~/vidtv.conf
+	ERROR    command BANDWIDTH_HZ (5) not found during retrieve
+	Cannot calc frequency shift. Either bandwidth/symbol-rate is unavailable (yet).
+	Scanning frequency #1 330000000
+	    (0x00) Signal= -68.00dBm
+	Scanning frequency #2 474000000
+	Lock   (0x1f) Signal= -34.45dBm C/N= 33.74dB UCB= 0
+	Service Beethoven, provider LinuxTV.org: digital television
 
 For more information on dvb-scan, check its documentation online here:
 `dvb-scan Documentation <https://www.linuxtv.org/wiki/index.php/Dvbscan>`_.
@@ -344,23 +390,38 @@ Using dvb-zap
 
 dvbv5-zap is a command line tool that can be used to record MPEG-TS to disk. The
 typical use is to tune into a channel and put it into record mode. The example
-below - which is taken from the documentation - illustrates that::
+below - which is taken from the documentation - illustrates that\ [1]_::
 
-	$ dvbv5-zap -c dvb_channel.conf "trilhas sonoras" -r
-	using demux '/dev/dvb/adapter0/demux0'
+	$ dvbv5-zap -c dvb_channel.conf "beethoven" -o music.ts -P -t 10
+	using demux 'dvb0.demux0'
 	reading channels from file 'dvb_channel.conf'
-	service has pid type 05:  204
-	tuning to 573000000 Hz
-	audio pid 104
-	  dvb_set_pesfilter 104
-	Lock   (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 70 postBER= 3.14x10^-3 PER= 0
-	DVR interface '/dev/dvb/adapter0/dvr0' can now be opened
+	tuning to 474000000 Hz
+	pass all PID's to TS
+	dvb_set_pesfilter 8192
+	dvb_dev_set_bufsize: buffer set to 6160384
+	Lock   (0x1f) Quality= Good Signal= -34.66dBm C/N= 33.41dB UCB= 0 postBER= 0 preBER= 1.05x10^-3 PER= 0
+	Lock   (0x1f) Quality= Good Signal= -34.57dBm C/N= 33.46dB UCB= 0 postBER= 0 preBER= 1.05x10^-3 PER= 0
+	Record to file 'music.ts' started
+	received 24587768 bytes (2401 Kbytes/sec)
+	Lock   (0x1f) Quality= Good Signal= -34.42dBm C/N= 33.89dB UCB= 0 postBER= 0 preBER= 2.44x10^-3 PER= 0
+
+.. [1] In this example, it records 10 seconds with all program ID's stored
+       at the music.ts file.
+
 
-The channel can be watched by playing the contents of the DVR interface, with
-some player that recognizes the MPEG-TS format, such as *mplayer* or *vlc*.
+The channel can be watched by playing the contents of the stream with some
+player that  recognizes the MPEG-TS format, such as ``mplayer`` or ``vlc``.
 
 By playing the contents of the stream one can visually inspect the workings of
-vidtv, e.g.::
+vidtv, e.g., to play a recorded TS file with::
+
+	$ mplayer music.ts
+
+or, alternatively, running this command on one terminal::
+
+	$ dvbv5-zap -c dvb_channel.conf "beethoven" -P -r &
+
+And, on a second terminal, playing the contents from DVR interface with::
 
 	$ mplayer /dev/dvb/adapter0/dvr0
 
@@ -423,3 +484,30 @@ A nice addition is to simulate some noise when the signal quality is bad by:
 - Updating the error statistics accordingly (e.g. BER, etc).
 
 - Simulating some noise in the encoded data.
+
+Functions and structs used within vidtv
+---------------------------------------
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_bridge.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_channel.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_demod.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_encoder.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_mux.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_pes.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_psi.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_s302m.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_ts.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_common.c
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.c
diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
index cf3ca236d2cc..21c847890d03 100644
--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -57,9 +57,8 @@ to enable them. ::
 They can be enabled individually. The full list of the parameters: ::
 
 	make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \
-	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \
-	  READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \
-	  HOSTLD=ld.lld
+	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump READELF=llvm-readelf \
+	  HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar HOSTLD=ld.lld
 
 Currently, the integrated assembler is disabled by default. You can pass
 ``LLVM_IAS=1`` to enable it.
diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst
index 21537766be4d..4b9ed5874d5a 100644
--- a/Documentation/networking/netdev-FAQ.rst
+++ b/Documentation/networking/netdev-FAQ.rst
@@ -254,6 +254,32 @@ you will have done run-time testing specific to your change, but at a
 minimum, your changes should survive an ``allyesconfig`` and an
 ``allmodconfig`` build without new warnings or failures.
 
+Q: How do I post corresponding changes to user space components?
+----------------------------------------------------------------
+A: User space code exercising kernel features should be posted
+alongside kernel patches. This gives reviewers a chance to see
+how any new interface is used and how well it works.
+
+When user space tools reside in the kernel repo itself all changes
+should generally come as one series. If series becomes too large
+or the user space project is not reviewed on netdev include a link
+to a public repo where user space patches can be seen.
+
+In case user space tooling lives in a separate repository but is
+reviewed on netdev  (e.g. patches to `iproute2` tools) kernel and
+user space patches should form separate series (threads) when posted
+to the mailing list, e.g.::
+
+  [PATCH net-next 0/3] net: some feature cover letter
+   └─ [PATCH net-next 1/3] net: some feature prep
+   └─ [PATCH net-next 2/3] net: some feature do it
+   └─ [PATCH net-next 3/3] selftest: net: some feature
+
+  [PATCH iproute2-next] ip: add support for some feature
+
+Posting as one thread is discouraged because it confuses patchwork
+(as of patchwork 2.2.2).
+
 Q: Any other tips to help ensure my net/net-next patch gets OK'd?
 -----------------------------------------------------------------
 A: Attention to detail.  Re-read your own work as if you were the
diff --git a/Documentation/xtensa/mmu.rst b/Documentation/xtensa/mmu.rst
index e52a12960fdc..450573afa31a 100644
--- a/Documentation/xtensa/mmu.rst
+++ b/Documentation/xtensa/mmu.rst
@@ -82,7 +82,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0xc0000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0xc7ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xc8000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
@@ -124,7 +125,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0xa0000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0xa7ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xa8000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
@@ -167,7 +169,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0x90000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0x97ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0x98000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE