Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...

4 files changed, 113 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/dma/img-mdc-dma.txt b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
new file mode 100644
index 000000000000..28c1341db346
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+  node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+  The maximum burst size is this value multiplied by the hardware-reported bus
+  width.
+- #dma-cells: Must be 3:
+  - The first cell is the peripheral's DMA request line.
+  - The second cell is a bitmap specifying to which channels the DMA request
+    line may be mapped (i.e. bit N set indicates channel N is usable).
+  - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32.  If not specified
+  the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+	compatible = "img,pistachio-mdc-dma";
+	reg = <0x18143000 0x1000>;
+	interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&system_clk>;
+	clock-names = "sys";
+
+	img,max-burst-multiplier = <16>;
+	img,cr-periph = <&cr_periph>;
+
+	#dma-cells = <3>;
+};
+
+spi@18100f00 {
+	...
+	dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+	dma-names = "tx", "rx";
+	...
+};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index f7e21b1c2a05..09daeef1ff22 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -5,9 +5,6 @@ controller instances named DMAC capable of serving multiple clients. Channels
 can be dedicated to specific clients or shared between a large number of
 clients.
 
-DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
-called MID/RID.
-
 Each DMA client is connected to one dedicated port of the DMAC, identified by
 an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
 256 clients in total. When the number of hardware channels is lower than the
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index d58675ea1abf..c261598164a7 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -38,7 +38,7 @@ Example:
 		chan_allocation_order = <1>;
 		chan_priority = <1>;
 		block_size = <0xfff>;
-		data_width = <3 3 0 0>;
+		data_width = <3 3>;
 	};
 
 DMA clients connected to the Designware DMA controller must use the format
diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt
index 766658ccf235..05d2280190f1 100644
--- a/Documentation/dmaengine/provider.txt
+++ b/Documentation/dmaengine/provider.txt
@@ -113,6 +113,31 @@ need to initialize a few fields in there:
   * channels:	should be initialized as a list using the
 		INIT_LIST_HEAD macro for example
 
+  * src_addr_widths:
+    - should contain a bitmask of the supported source transfer width
+
+  * dst_addr_widths:
+    - should contain a bitmask of the supported destination transfer
+      width
+
+  * directions:
+    - should contain a bitmask of the supported slave directions
+      (i.e. excluding mem2mem transfers)
+
+  * residue_granularity:
+    - Granularity of the transfer residue reported to dma_set_residue.
+    - This can be either:
+      + Descriptor
+        -> Your device doesn't support any kind of residue
+           reporting. The framework will only know that a particular
+           transaction descriptor is done.
+      + Segment
+        -> Your device is able to report which chunks have been
+           transferred
+      + Burst
+        -> Your device is able to report which burst have been
+           transferred
+
   * dev: 	should hold the pointer to the struct device associated
 		to your current driver instance.
 
@@ -274,48 +299,36 @@ supported.
        account the current period.
      - This function can be called in an interrupt context.
 
-   * device_control
-     - Used by client drivers to control and configure the channel it
-       has a handle on.
-     - Called with a command and an argument
-       + The command is one of the values listed by the enum
-         dma_ctrl_cmd. The valid commands are:
-         + DMA_PAUSE
-           + Pauses a transfer on the channel
-           + This command should operate synchronously on the channel,
-             pausing right away the work of the given channel
-         + DMA_RESUME
-           + Restarts a transfer on the channel
-           + This command should operate synchronously on the channel,
-             resuming right away the work of the given channel
-         + DMA_TERMINATE_ALL
-           + Aborts all the pending and ongoing transfers on the
-             channel
-           + This command should operate synchronously on the channel,
-             terminating right away all the channels
-         + DMA_SLAVE_CONFIG
-           + Reconfigures the channel with passed configuration
-           + This command should NOT perform synchronously, or on any
-             currently queued transfers, but only on subsequent ones
-           + In this case, the function will receive a
-             dma_slave_config structure pointer as an argument, that
-             will detail which configuration to use.
-           + Even though that structure contains a direction field,
-             this field is deprecated in favor of the direction
-             argument given to the prep_* functions
-         + FSLDMA_EXTERNAL_START
-           + TODO: Why does that even exist?
-       + The argument is an opaque unsigned long. This actually is a
-         pointer to a struct dma_slave_config that should be used only
-         in the DMA_SLAVE_CONFIG.
-
-  * device_slave_caps
-    - Called through the framework by client drivers in order to have
-      an idea of what are the properties of the channel allocated to
-      them.
-    - Such properties are the buswidth, available directions, etc.
-    - Required for every generic layer doing DMA transfers, such as
-      ASoC.
+   * device_config
+     - Reconfigures the channel with the configuration given as
+       argument
+     - This command should NOT perform synchronously, or on any
+       currently queued transfers, but only on subsequent ones
+     - In this case, the function will receive a dma_slave_config
+       structure pointer as an argument, that will detail which
+       configuration to use.
+     - Even though that structure contains a direction field, this
+       field is deprecated in favor of the direction argument given to
+       the prep_* functions
+     - This call is mandatory for slave operations only. This should NOT be
+       set or expected to be set for memcpy operations.
+       If a driver support both, it should use this call for slave
+       operations only and not for memcpy ones.
+
+   * device_pause
+     - Pauses a transfer on the channel
+     - This command should operate synchronously on the channel,
+       pausing right away the work of the given channel
+
+   * device_resume
+     - Resumes a transfer on the channel
+     - This command should operate synchronously on the channel,
+       pausing right away the work of the given channel
+
+   * device_terminate_all
+     - Aborts all the pending and ongoing transfers on the channel
+     - This command should operate synchronously on the channel,
+       terminating right away all the channels
 
 Misc notes (stuff that should be documented, but don't really know
 where to put them)