Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
  is bound to cause conflicts with a trivial change somewhere).

  The only big major rework of note is the one from Hannes trying to
  clean up our result handling code in the drivers to make it
  consistent"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
  scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
  scsi: ufs: Give clk scaling min gear a value
  scsi: lpfc: Fix 'physical' typos
  scsi: megaraid_mbox: Fix spelling of 'allocated'
  scsi: qla2xxx: Simplify the calculation of variables
  scsi: message: fusion: Fix 'physical' typos
  scsi: target: core: Change ASCQ for residual write
  scsi: target: core: Signal WRITE residuals
  scsi: target: core: Set residuals for 4Kn devices
  scsi: hisi_sas: Add trace FIFO debugfs support
  scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
  scsi: hisi_sas: Enable debugfs support by default
  scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
  scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
  scsi: lpfc: Add auto select on IRQ_POLL
  scsi: ncr53c8xx: Fix typos
  scsi: lpfc: Fix ancient double free
  scsi: qla2xxx: Fix some memory corruption
  scsi: qla2xxx: Remove redundant NULL check
  scsi: megaraid: Fix ifnullfree.cocci warnings
  ...

6 files changed, 14 insertions, 16 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index 75ccc5c62b3c..d1bc23cb6a9d 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -1161,3 +1161,14 @@ Description:	This entry shows the configured size of WriteBooster buffer.
 		0400h corresponds to 4GB.
 
 		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/wb_on
+Date:		January 2021
+Contact:	Bean Huo <beanhuo@micron.com>
+Description:	This node is used to set or display whether UFS WriteBooster is
+		enabled. Echo 0 to this file to disable UFS WriteBooster or 1 to
+		enable it. The WriteBooster is enabled after power-on/reset,
+		however, it will be disabled/enable while CLK scaling down/up
+		(if the platform supports UFSHCD_CAP_CLK_SCALING). For a
+		platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can
+		disable/enable WriteBooster through this sysfs node.
diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index 910c6303c7ea..de669c2f1fcd 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -461,10 +461,8 @@ more details, with real examples.
 
 		# drivers/scsi/Makefile
 		CFLAGS_aha152x.o =   -DAHA152X_STAT -DAUTOCONF
-		CFLAGS_gdth.o    = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ \
-				     -DGDTH_STATISTICS
 
-	These two lines specify compilation flags for aha152x.o and gdth.o.
+	This line specify compilation flags for aha152x.o.
 
 	$(AFLAGS_$@) is a similar feature for source files in assembly
 	languages.
diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst
index c6dfe060ec2f..fa5a62f4150c 100644
--- a/Documentation/process/magic-number.rst
+++ b/Documentation/process/magic-number.rst
@@ -99,7 +99,6 @@ USB_SERIAL_PORT_MAGIC 0x7301           usb_serial_port          ``drivers/usb/se
 CG_MAGIC              0x00090255       ufs_cylinder_group       ``include/linux/ufs_fs.h``
 RPORT_MAGIC           0x00525001       r_port                   ``drivers/char/rocket_int.h``
 LSEMAGIC              0x05091998       lse                      ``drivers/fc4/fc.c``
-GDTIOCTL_MAGIC        0x06030f07       gdth_iowr_str            ``drivers/scsi/gdth_ioctl.h``
 RIEBL_MAGIC           0x09051990                                ``drivers/net/atarilance.c``
 NBD_REQUEST_MAGIC     0x12560953       nbd_request              ``include/linux/nbd.h``
 RED_MAGIC2            0x170fc2a5       (any)                    ``mm/slab.c``
@@ -142,7 +141,6 @@ PWC_MAGIC             0x89DC10AB       pwc_device               ``drivers/usb/me
 NBD_REPLY_MAGIC       0x96744668       nbd_reply                ``include/linux/nbd.h``
 ENI155_MAGIC          0xa54b872d       midway_eprom	        ``drivers/atm/eni.h``
 CODA_MAGIC            0xC0DAC0DA       coda_file_info           ``fs/coda/coda_fs_i.h``
-DPMEM_MAGIC           0xc0ffee11       gdt_pci_sram             ``drivers/scsi/gdth.h``
 YAM_MAGIC             0xF10A7654       yam_port                 ``drivers/net/hamradio/yam.c``
 CCB_MAGIC             0xf2691ad2       ccb                      ``drivers/scsi/ncr53c8xx.c``
 QUEUE_MAGIC_FREE      0xf7e1c9a3       queue_entry              ``drivers/scsi/arm/queue.c``
diff --git a/Documentation/scsi/libsas.rst b/Documentation/scsi/libsas.rst
index 7216b5d25800..6589dfefbc02 100644
--- a/Documentation/scsi/libsas.rst
+++ b/Documentation/scsi/libsas.rst
@@ -189,13 +189,8 @@ num_phys
 The event interface::
 
 	/* LLDD calls these to notify the class of an event. */
-	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
-	void (*notify_port_event)(struct sas_phy *, enum port_event);
-	void (*notify_phy_event)(struct sas_phy *, enum phy_event);
-
-When sas_register_ha() returns, those are set and can be
-called by the LLDD to notify the SAS layer of such events
-the SAS layer.
+	void sas_notify_port_event(struct sas_phy *, enum port_event, gfp_t);
+	void sas_notify_phy_event(struct sas_phy *, enum phy_event, gfp_t);
 
 The port notification::
 
diff --git a/Documentation/scsi/scsi-parameters.rst b/Documentation/scsi/scsi-parameters.rst
index dea5803f5c62..c42c55e1e25e 100644
--- a/Documentation/scsi/scsi-parameters.rst
+++ b/Documentation/scsi/scsi-parameters.rst
@@ -38,9 +38,6 @@ parameters may be changed at runtime by the command
 			See drivers/scsi/BusLogic.c, comment before function
 			BusLogic_ParseDriverOptions().
 
-	gdth=		[HW,SCSI]
-			See header of drivers/scsi/gdth.c.
-
 	gvp11=		[HW,SCSI]
 
 	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index b5231d7f9200..d02ba2f67df8 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -157,7 +157,6 @@ Code  Seq#    Include File                                           Comments
 'I'   all    linux/isdn.h                                            conflict!
 'I'   00-0F  drivers/isdn/divert/isdn_divert.h                       conflict!
 'I'   40-4F  linux/mISDNif.h                                         conflict!
-'J'   00-1F  drivers/scsi/gdth_ioctl.h
 'K'   all    linux/kd.h
 'L'   00-1F  linux/loop.h                                            conflict!
 'L'   10-1F  drivers/scsi/mpt3sas/mpt3sas_ctl.h                      conflict!