Merge tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Quite a lot of work going on the core this release, mainly around
  system initialization, but a quiet release for drivers:

   - fixes for registration of multiple regulators on a PMIC from Javier
     Martinez Canillas and Jon Hunter.

   - cleanups to the regulator_get() code from Dmitry Torokhov

   - lots of constifcation of structs from Bhumika Goyal

   - support for Motorola CPCAP regulators from Tony Lindgren"

* tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: core: Resolve supplies before disabling unused regulators
  regulator: Fix regulator_summary for deviceless consumers
  regulator: tps65086: Fix DT node referencing in of_parse_cb
  regulator: tps65086: Fix expected switch DT node names
  regulator: core: simplify _regulator_get()
  regulator: core: have regulator_dev_lookup() return ERR_PTR-encoded errors
  regulator: gpio: correct default type
  regulator: cpcap: Add basic regulator support
  regulator: core: fix typo in regulator_bulk_disable()
  regulator: core: optimize devm_regulator_bulk_get()
  regulator: core: simplify regulator_bulk_force_disable()
  regulator: core: have _regulator_get() accept get_type argument
  regulator: core: remove dead code in _regulator_get()
  regulator: rn5t618: constify regulator_ops structure
  regulator: rc5t583-regulator: constify regulator_ops structure
  regulator: pv88090-regulator: constify regulator_ops structure
  regulator: pv88080-regulator: constify regulator_ops structure
  regulator: pv88060-regulator: constify regulator_ops structure
  regulator: pfuze100-regulator: constify regulator_ops structure
  regulator: pcf50633-regulator: constify regulator_ops structure
  ...

4 files changed, 92 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
index 37c4ea076f88..1d58c8cfdbc0 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -14,6 +14,7 @@ Optional properties:
 - anatop-delay-bit-shift: Bit shift for the step time register
 - anatop-delay-bit-width: Number of bits used in the step time register
 - vin-supply: The supply for this regulator
+- anatop-enable-bit: Regulator enable bit offset
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.
diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
new file mode 100644
index 000000000000..675f4437ce92
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
@@ -0,0 +1,34 @@
+Motorola CPCAP PMIC voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value one of:
+    "motorola,cpcap-regulator"
+    "motorola,mapphone-cpcap-regulator"
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-enable-ramp-delay"
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+Optional regulator properties:
+- "regulator-boot-on"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+Example:
+
+cpcap_regulator: regulator {
+	compatible = "motorola,cpcap-regulator";
+
+	cpcap_regulators: regulators {
+		sw5: SW5 {
+			regulator-min-microvolt = <5050000>;
+			regulator-max-microvolt = <5050000>;
+			regulator-enable-ramp-delay = <50000>;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index e5cac1e0ca8a..dd1ed789728e 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -13,7 +13,7 @@ Optional properties:
 - startup-delay-us	: Startup time in microseconds.
 - enable-active-high	: Polarity of GPIO is active high (default is low).
 - regulator-type	: Specifies what is being regulated, must be either
-			  "voltage" or "current", defaults to current.
+			  "voltage" or "current", defaults to voltage.
 
 Any property defined as part of the core regulator binding defined in
 regulator.txt can also be used.
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
index 1f8d6f84b657..4e3dfb5b5f16 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8841-regulators"
 		    "qcom,rpm-pm8916-regulators"
 		    "qcom,rpm-pm8941-regulators"
+		    "qcom,rpm-pm8994-regulators"
 		    "qcom,rpm-pma8084-regulators"
 
 - vdd_s1-supply:
@@ -80,6 +81,56 @@ Regulator nodes are identified by their compatible:
 - vdd_s10-supply:
 - vdd_s11-supply:
 - vdd_s12-supply:
+- vdd_l1-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l3_l11-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_l5_l7-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l3_l11-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l14_l15-supply:
+- vdd_l14_l15-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l17_l29-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l20_l21-supply:
+- vdd_l20_l21-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l25-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l17_l29-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_lvs1_2-supply:
+	Usage: optional (pm8994 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+- vdd_s9-supply:
+- vdd_s10-supply:
+- vdd_s11-supply:
+- vdd_s12-supply:
 - vdd_l1_l11-supply:
 - vdd_l2_l3_l4_l27-supply:
 - vdd_l5_l7-supply:
@@ -113,6 +164,11 @@ pm8941:
 	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
 	lvs3, 5vs1, 5vs2
 
+pm8994:
+	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
+	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
+	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
+
 pma8084:
 	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
 	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,