Merge tag 'regulator-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The main core change this release is generic support for handling of
  hardware errors from Matti Vaittinen, including some small updates to
  the reboot and thermal code so we can share support for powering off
  the system if things are going wrong enough.

  Otherwise this release we've mainly seen the addition of new drivers,
  including MT6359 which has pulled in some small changes from the MFD
  tree for build dependencies.

   - Support for controlling the trigger points for hardware error
     detection, and shared handlers for this.

   - Support for Maxim MAX8993, Mediatek MT6359 and MT6359P, Qualcomm
     PM8226 and SA8115P-ADP, and Sylergy TCS4526"

* tag 'regulator-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (91 commits)
  regulator: bd9576: Fix uninitializes variable may_have_irqs
  regulator: max8893: Select REGMAP_I2C to fix build error
  regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
  regulator: mt6358: Fix vdram2 .vsel_mask
  regulator: hi6421v600: Fix setting wrong driver_data
  MAINTAINERS: Add reviewer for regulator irq_helpers
  regulator: bd9576: Fix the driver name in id table
  regulator: bd9576: Support error reporting
  regulator: bd9576 add FET ON-resistance for OCW
  regulator: add property parsing and callbacks to set protection limits
  regulator: IRQ based event/error notification helpers
  regulator: move rdev_print helpers to internal.h
  regulator: add warning flags
  thermal: Use generic HW-protection shutdown API
  reboot: Add hardware protection power-off
  regulator: Add protection limit properties
  regulator: hi6421v600: Fix setting idle mode
  regulator: Add MAX8893 bindings
  regulator: max8893: add regulator driver
  regulator: hi6421: Use correct variable type for regmap api val argument
  ...

10 files changed, 735 insertions, 23 deletions

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 2661775a3825..99a84b69a29f 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -21,6 +21,7 @@ Required properties:
 compatible:
 	"mediatek,mt6323" for PMIC MT6323
 	"mediatek,mt6358" for PMIC MT6358
+	"mediatek,mt6359" for PMIC MT6359
 	"mediatek,mt6397" for PMIC MT6397
 
 Optional subnodes:
diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml
new file mode 100644
index 000000000000..2b5e977bf409
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8893.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/max8893.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for MAX8893 PMIC from Maxim Integrated.
+
+maintainers:
+  - Sergey Larin <cerg2010cerg2010@mail.ru>
+
+description: |
+  The device has 5 LDO regulators and a single BUCK regulator.
+  Programming is done through I2C bus.
+
+properties:
+  compatible:
+    const: maxim,max8893
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(ldo[1-5]|buck)$":
+        $ref: "regulator.yaml#"
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmic@3e {
+                    compatible = "maxim,max8893";
+                    reg = <0x3e>;
+
+                    regulators {
+                            /* Front camera - s5k6aafx, back - m5mo */
+                            /* Numbers used to indicate the sequence */
+                            front_1_back_1: buck {
+                                    regulator-name = "cam_isp_core_1v2";
+                                    regulator-min-microvolt = <1200000>;
+                                    regulator-max-microvolt = <1200000>;
+                            };
+
+                            front_4_back_5: ldo1 {
+                                    regulator-name = "vt_io_1v8,cam_isp_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+
+                            front_3_back_4: ldo2 {
+                                    regulator-name = "vt_core_1v5";
+                                    regulator-min-microvolt = <1500000>;
+                                    regulator-max-microvolt = <1500000>;
+                            };
+
+                            front_5_back_6: ldo3 {
+                                    regulator-name = "vt_cam_1v8,vt_sensor_io_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+
+                            ldo4 {
+                                    /* not used */
+                            };
+
+                            back_7: ldo5 {
+                                    regulator-name = "cam_sensor_io_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+                    };
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
new file mode 100644
index 000000000000..8cc413eb482d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -0,0 +1,385 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6359 Regulator from MediaTek Integrated
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+  List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  MT6359 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(fe|bif|io)28$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(fe|bif|io)28$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(aud|io|aux|rf|m)18$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(aud|io|aux|rf|m)18$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vsim[12]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vsim[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6359_vs1_buck_reg: buck_vs1 {
+          regulator-name = "vs1";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-always-on;
+        };
+        mt6359_vgpu11_buck_reg: buck_vgpu11 {
+          regulator-name = "vgpu11";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vmodem_buck_reg: buck_vmodem {
+          regulator-name = "vmodem";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1100000>;
+          regulator-ramp-delay = <10760>;
+          regulator-enable-ramp-delay = <200>;
+        };
+        mt6359_vpu_buck_reg: buck_vpu {
+          regulator-name = "vpu";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vcore_buck_reg: buck_vcore {
+          regulator-name = "vcore";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vs2_buck_reg: buck_vs2 {
+          regulator-name = "vs2";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1600000>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-always-on;
+        };
+        mt6359_vpa_buck_reg: buck_vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3650000>;
+          regulator-enable-ramp-delay = <300>;
+        };
+        mt6359_vproc2_buck_reg: buck_vproc2 {
+          regulator-name = "vproc2";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vproc1_buck_reg: buck_vproc1 {
+          regulator-name = "vproc1";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
+          regulator-name = "vcore_sshub";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+        };
+        mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub {
+          regulator-name = "vgpu11_sshub";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+        };
+        mt6359_vaud18_ldo_reg: ldo_vaud18 {
+          regulator-name = "vaud18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vsim1_ldo_reg: ldo_vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6359_vibr_ldo_reg: ldo_vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vrf12_ldo_reg: ldo_vrf12 {
+          regulator-name = "vrf12";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1300000>;
+        };
+        mt6359_vusb_ldo_reg: ldo_vusb {
+          regulator-name = "vusb";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-enable-ramp-delay = <960>;
+          regulator-always-on;
+        };
+        mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
+          regulator-name = "vsram_proc2";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vio18_ldo_reg: ldo_vio18 {
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-enable-ramp-delay = <960>;
+          regulator-always-on;
+        };
+        mt6359_vcamio_ldo_reg: ldo_vcamio {
+          regulator-name = "vcamio";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+        };
+        mt6359_vcn18_ldo_reg: ldo_vcn18 {
+          regulator-name = "vcn18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vfe28_ldo_reg: ldo_vfe28 {
+          regulator-name = "vfe28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <120>;
+        };
+        mt6359_vcn13_ldo_reg: ldo_vcn13 {
+          regulator-name = "vcn13";
+          regulator-min-microvolt = <900000>;
+          regulator-max-microvolt = <1300000>;
+        };
+        mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
+          regulator-name = "vcn33_1_bt";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
+          regulator-name = "vcn33_1_wifi";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vaux18_ldo_reg: ldo_vaux18 {
+          regulator-name = "vaux18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vsram_others_ldo_reg: ldo_vsram_others {
+          regulator-name = "vsram_others";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vefuse_ldo_reg: ldo_vefuse {
+          regulator-name = "vefuse";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <2000000>;
+        };
+        mt6359_vxo22_ldo_reg: ldo_vxo22 {
+          regulator-name = "vxo22";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-always-on;
+        };
+        mt6359_vrfck_ldo_reg: ldo_vrfck {
+          regulator-name = "vrfck";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <1700000>;
+        };
+        mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 {
+          regulator-name = "vrfck";
+          regulator-min-microvolt = <1240000>;
+          regulator-max-microvolt = <1600000>;
+        };
+        mt6359_vbif28_ldo_reg: ldo_vbif28 {
+          regulator-name = "vbif28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vio28_ldo_reg: ldo_vio28 {
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-always-on;
+        };
+        mt6359_vemc_ldo_reg: ldo_vemc {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vemc_1_ldo_reg: ldo_vemc_1 {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
+          regulator-name = "vcn33_2_bt";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
+          regulator-name = "vcn33_2_wifi";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_va12_ldo_reg: ldo_va12 {
+          regulator-name = "va12";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-always-on;
+        };
+        mt6359_va09_ldo_reg: ldo_va09 {
+          regulator-name = "va09";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1200000>;
+        };
+        mt6359_vrf18_ldo_reg: ldo_vrf18 {
+          regulator-name = "vrf18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1810000>;
+        };
+        mt6359_vsram_md_ldo_reg: ldo_vsram_md {
+          regulator-name = "vsram_md";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <10760>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vufs_ldo_reg: ldo_vufs {
+          regulator-name = "vufs";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+        };
+        mt6359_vm18_ldo_reg: ldo_vm18 {
+          regulator-name = "vm18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-always-on;
+        };
+        mt6359_vbbck_ldo_reg: ldo_vbbck {
+          regulator-name = "vbbck";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1200000>;
+        };
+        mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
+          regulator-name = "vsram_proc1";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vsim2_ldo_reg: ldo_vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
+          regulator-name = "vsram_others_sshub";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index e561a5b941e4..34de38377aa6 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -33,6 +33,9 @@ description: |
 
     The names used for regulator nodes must match those supported by a given
     PMIC. Supported regulator node names are
+      For PM6150, smps1 - smps5, ldo1 - ldo19
+      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
+      For PM7325, smps1 - smps8, ldo1 - ldo19
       For PM8005, smps1 - smps4
       For PM8009, smps1 - smps2, ldo1 - ldo7
       For PM8150, smps1 - smps10, ldo1 - ldo18
@@ -41,15 +44,15 @@ description: |
       For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
       For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
       For PMI8998, bob
-      For PM6150, smps1 - smps5, ldo1 - ldo19
-      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
-      For PMX55, smps1 - smps7, ldo1 - ldo16
-      For PM7325, smps1 - smps8, ldo1 - ldo19
       For PMR735A, smps1 - smps3, ldo1 - ldo7
+      For PMX55, smps1 - smps7, ldo1 - ldo16
 
 properties:
   compatible:
     enum:
+      - qcom,pm6150-rpmh-regulators
+      - qcom,pm6150l-rpmh-regulators
+      - qcom,pm7325-rpmh-regulators
       - qcom,pm8005-rpmh-regulators
       - qcom,pm8009-rpmh-regulators
       - qcom,pm8009-1-rpmh-regulators
@@ -59,11 +62,9 @@ properties:
       - qcom,pm8350c-rpmh-regulators
       - qcom,pm8998-rpmh-regulators
       - qcom,pmi8998-rpmh-regulators
-      - qcom,pm6150-rpmh-regulators
-      - qcom,pm6150l-rpmh-regulators
-      - qcom,pmx55-rpmh-regulators
-      - qcom,pm7325-rpmh-regulators
+      - qcom,pmm8155au-rpmh-regulators
       - qcom,pmr735a-rpmh-regulators
+      - qcom,pmx55-rpmh-regulators
 
   qcom,pmic-id:
     description: |
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index a35c6cb9bf97..83b53579f463 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -24,6 +24,10 @@ description:
 
   For mp5496, s2
 
+  For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
+  l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25,
+  l26, l27, l28, lvs1
+
   For pm8841, s1, s2, s3, s4, s5, s6, s7, s8
 
   For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
@@ -68,6 +72,7 @@ properties:
   compatible:
     enum:
       - qcom,rpm-mp5496-regulators
+      - qcom,rpm-pm8226-regulators
       - qcom,rpm-pm8841-regulators
       - qcom,rpm-pm8916-regulators
       - qcom,rpm-pm8941-regulators
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 6d0bc9cd4040..a6ae9ecae5cc 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -117,6 +117,88 @@ properties:
     description: Enable over current protection.
     type: boolean
 
+  regulator-oc-protection-microamp:
+    description: Set over current protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted.
+
+  regulator-oc-error-microamp:
+    description: Set over current error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested.
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted.
+
+  regulator-oc-warn-microamp:
+    description: Set over current warning limit. This is a limit where hardware
+      is assumed still to be functional but approaching limit where it gets
+      damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted.
+
+  regulator-ov-protection-microvolt:
+    description: Set over voltage protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted. Limit is given as microvolt offset from
+      voltage set to regulator.
+
+  regulator-ov-error-microvolt:
+    description: Set over voltage error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted. Limit
+      is given as microvolt offset from voltage set to regulator.
+
+  regulator-ov-warn-microvolt:
+    description: Set over voltage warning limit. This is a limit where hardware
+      is assumed still to be functional but approaching limit where it gets
+      damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted. Limit is given as microvolt
+      offset from voltage set to regulator.
+
+  regulator-uv-protection-microvolt:
+    description: Set over under voltage protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted. Limit is given as microvolt offset from
+      voltage set to regulator.
+
+  regulator-uv-error-microvolt:
+    description: Set under voltage error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted. Limit
+      is given as microvolt offset from voltage set to regulator.
+
+  regulator-uv-warn-microvolt:
+    description: Set over under voltage warning limit. This is a limit where
+      hardware is assumed still to be functional but approaching limit where
+      it gets damaged. Recovery actions should be initiated. Zero can be passed
+      to disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted. Limit is given as microvolt
+      offset from voltage set to regulator.
+
+  regulator-temp-protection-kelvin:
+    description: Set over temperature protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted.
+
+  regulator-temp-error-kelvin:
+    description: Set over temperature error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted.
+
+  regulator-temp-warn-kelvin:
+    description: Set over temperature warning limit. This is a limit where
+      hardware is assumed still to be functional but approaching limit where it
+      gets damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted.
+
   regulator-active-discharge:
     description: |
       tristate, enable/disable active discharge of regulators. The values are:
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml
new file mode 100644
index 000000000000..0534b0d68359
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6160 BuckBoost converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT6160 is a high-efficiency buck-boost converter that can provide
+  up to 3A output current from 2025mV to 5200mV. And it support the wide
+  input voltage range from 2200mV to 5500mV.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt6160
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: A connection of the 'enable' gpio line.
+    maxItems: 1
+
+  richtek,vsel-active-low:
+    description: |
+      Used to indicate the 'vsel' pin active level. if not specified, use
+      high active level as the default.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt6160@75 {
+        compatible = "richtek,rt6160";
+        reg = <0x75>;
+        enable-gpios = <&gpio26 2 0>;
+        regulator-name = "rt6160-buckboost";
+        regulator-min-microvolt = <2025000>;
+        regulator-max-microvolt = <5200000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
new file mode 100644
index 000000000000..796ceac87445
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6245-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6245 High Current Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT6245 is a high-performance, synchronous step-down converter
+  that can deliver up to 14A output current with an input supply
+  voltage range of 4.5V to 17V.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt6245
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      A connection of the chip 'enable' gpio line. If not provided,
+      it will be treat as a default-on power.
+    maxItems: 1
+
+  richtek,oc-level-select:
+    $ref: "/schemas/types.yaml#/definitions/uint8"
+    enum: [0, 1, 2, 3]
+    description: |
+      Over current level selection. Each respective value means the current
+      limit 8A, 14A, 12A, 10A. If this property is missing then keep in
+      in chip default.
+
+  richtek,ot-level-select:
+    $ref: "/schemas/types.yaml#/definitions/uint8"
+    enum: [0, 1, 2]
+    description: |
+      Over temperature level selection. Each respective value means the degree
+      150'c, 130'c, 170'c. If this property is missing then keep in chip
+      default.
+
+  richtek,pgdly-time-select:
+    $ref: "/schemas/types.yaml#/definitions/uint8"
+    enum: [0, 1, 2, 3]
+    description: |
+      Power good signal delay time selection. Each respective value means the
+      delay time 0us, 10us, 20us, 40us. If this property is missing then keep
+      in chip default.
+
+
+  richtek,switch-freq-select:
+    $ref: "/schemas/types.yaml#/definitions/uint8"
+    enum: [0, 1, 2]
+    description: |
+      Buck switch frequency selection. Each respective value means 400KHz,
+      800KHz, 1200KHz. If this property is missing then keep in chip default.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt6245@34 {
+        compatible = "richtek,rt6245";
+        status = "okay";
+        reg = <0x34>;
+        enable-gpios = <&gpio26 2 0>;
+
+        regulator-name = "rt6245-regulator";
+        regulator-min-microvolt = <437500>;
+        regulator-max-microvolt = <1387500>;
+        regulator-boot-on;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
index b6515a0cee62..7cb74cc8c5d9 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
@@ -27,6 +27,12 @@ patternProperties:
       Properties for single regulator.
     $ref: "regulator.yaml#"
 
+    properties:
+      rohm,ocw-fet-ron-micro-ohms:
+        description: |
+          External FET's ON-resistance. Required if VoutS1 OCP/OCW is
+          to be set.
+
     required:
       - regulator-name
 
diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
index 4b638c14bc16..c93fa5e961a0 100644
--- a/Documentation/driver-api/thermal/sysfs-api.rst
+++ b/Documentation/driver-api/thermal/sysfs-api.rst
@@ -740,21 +740,15 @@ possible.
 5. thermal_emergency_poweroff
 =============================
 
-On an event of critical trip temperature crossing. Thermal framework
-allows the system to shutdown gracefully by calling orderly_poweroff().
-In the event of a failure of orderly_poweroff() to shut down the system
-we are in danger of keeping the system alive at undesirably high
-temperatures. To mitigate this high risk scenario we program a work
-queue to fire after a pre-determined number of seconds to start
-an emergency shutdown of the device using the kernel_power_off()
-function. In case kernel_power_off() fails then finally
-emergency_restart() is called in the worst case.
+On an event of critical trip temperature crossing the thermal framework
+shuts down the system by calling hw_protection_shutdown(). The
+hw_protection_shutdown() first attempts to perform an orderly shutdown
+but accepts a delay after which it proceeds doing a forced power-off
+or as last resort an emergency_restart.
 
 The delay should be carefully profiled so as to give adequate time for
-orderly_poweroff(). In case of failure of an orderly_poweroff() the
-emergency poweroff kicks in after the delay has elapsed and shuts down
-the system.
+orderly poweroff.
 
-If set to 0 emergency poweroff will not be supported. So a carefully
-profiled non-zero positive value is a must for emergency poweroff to be
-triggered.
+If the delay is set to 0 emergency poweroff will not be supported. So a
+carefully profiled non-zero positive value is a must for emergency
+poweroff to be triggered.