Merge branch 'remotes/lorenzo/pci/meson'

  - Fix meson PERST# GPIO polarity problem (Remi Pommarel)

  - Add DT bindings for Amlogic Meson G12A (Neil Armstrong)

  - Fix meson clock names to match DT bindings (Neil Armstrong)

  - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil
    Armstrong)

  - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo
    PHY (Neil Armstrong)

  - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)

  - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil
    Armstrong)

* remotes/lorenzo/pci/meson:
  arm64: dts: khadas-vim3: add commented support for PCIe
  arm64: dts: meson-g12a: Add PCIe node
  phy: meson-g12a-usb3-pcie: Add support for PCIe mode
  PCI: amlogic: meson: Add support for G12A
  PCI: amlogic: Fix probed clock names
  dt-bindings: pci: amlogic, meson-pcie: Add G12A bindings
  PCI: amlogic: Fix reset assertion via gpio descriptor

1 files changed, 8 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
index efa2c8b9b85a..84fdc422792e 100644
--- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
@@ -9,13 +9,16 @@ Additional properties are described here:
 
 Required properties:
 - compatible:
-	should contain "amlogic,axg-pcie" to identify the core.
+	should contain :
+	- "amlogic,axg-pcie" for AXG SoC Family
+	- "amlogic,g12a-pcie" for G12A SoC Family
+	to identify the core.
 - reg:
 	should contain the configuration address space.
 - reg-names: Must be
 	- "elbi"	External local bus interface registers
 	- "cfg"		Meson specific registers
-	- "phy"		Meson PCIE PHY registers
+	- "phy"		Meson PCIE PHY registers for AXG SoC Family
 	- "config"	PCIe configuration space
 - reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
 - clocks: Must contain an entry for each entry in clock-names.
@@ -23,12 +26,13 @@ Required properties:
 	- "pclk"       PCIe GEN 100M PLL clock
 	- "port"       PCIe_x(A or B) RC clock gate
 	- "general"    PCIe Phy clock
-	- "mipi"       PCIe_x(A or B) 100M ref clock gate
+	- "mipi"       PCIe_x(A or B) 100M ref clock gate for AXG SoC Family
 - resets: phandle to the reset lines.
 - reset-names: must contain "phy" "port" and "apb"
-       - "phy"         Share PHY reset
+       - "phy"         Share PHY reset for AXG SoC Family
        - "port"        Port A or B reset
        - "apb"         Share APB reset
+- phys: should contain a phandle to the shared phy for G12A SoC Family
 - device_type:
 	should be "pci". As specified in designware-pcie.txt