Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The irq department delivers:

   - Expand the generic infrastructure handling the irq migration on CPU
     hotplug and convert X86 over to it. (Thomas Gleixner)

     Aside of consolidating code this is a preparatory change for:

   - Finalizing the affinity management for multi-queue devices. The
     main change here is to shut down interrupts which are affine to a
     outgoing CPU and reenabling them when the CPU comes online again.
     That avoids moving interrupts pointlessly around and breaking and
     reestablishing affinities for no value. (Christoph Hellwig)

     Note: This contains also the BLOCK-MQ and NVME changes which depend
     on the rework of the irq core infrastructure. Jens acked them and
     agreed that they should go with the irq changes.

   - Consolidation of irq domain code (Marc Zyngier)

   - State tracking consolidation in the core code (Jeffy Chen)

   - Add debug infrastructure for hierarchical irq domains (Thomas
     Gleixner)

   - Infrastructure enhancement for managing generic interrupt chips via
     devmem (Bartosz Golaszewski)

   - Constification work all over the place (Tobias Klauser)

   - Two new interrupt controller drivers for MVEBU (Thomas Petazzoni)

   - The usual set of fixes, updates and enhancements all over the
     place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
  irqchip/or1k-pic: Fix interrupt acknowledgement
  irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap
  irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
  nvme: Allocate queues for all possible CPUs
  blk-mq: Create hctx for each present CPU
  blk-mq: Include all present CPUs in the default queue mapping
  genirq: Avoid unnecessary low level irq function calls
  genirq: Set irq masked state when initializing irq_desc
  genirq/timings: Add infrastructure for estimating the next interrupt arrival time
  genirq/timings: Add infrastructure to track the interrupt timings
  genirq/debugfs: Remove pointless NULL pointer check
  irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
  irqchip/gic-v3-its: Add ACPI NUMA node mapping
  irqchip/gic-v3-its-platform-msi: Make of_device_ids const
  irqchip/gic-v3-its: Make of_device_ids const
  irqchip/irq-mvebu-icu: Add new driver for Marvell ICU
  irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP
  dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU
  genirq/irqdomain: Remove auto-recursive hierarchy support
  irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access
  ...

7 files changed, 154 insertions, 8 deletions

diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt
index 82001a25a14b..1f246eb25ca5 100644
--- a/Documentation/IRQ-domain.txt
+++ b/Documentation/IRQ-domain.txt
@@ -231,5 +231,42 @@ needs to:
 4) No need to implement irq_domain_ops.map and irq_domain_ops.unmap,
    they are unused with hierarchy irq_domain.
 
-Hierarchy irq_domain may also be used to support other architectures,
-such as ARM, ARM64 etc.
+Hierarchy irq_domain is in no way x86 specific, and is heavily used to
+support other architectures, such as ARM, ARM64 etc.
+
+=== Debugging ===
+
+If you switch on CONFIG_IRQ_DOMAIN_DEBUG (which depends on
+CONFIG_IRQ_DOMAIN and CONFIG_DEBUG_FS), you will find a new file in
+your debugfs mount point, called irq_domain_mapping. This file
+contains a live snapshot of all the IRQ domains in the system:
+
+ name              mapped  linear-max  direct-max  devtree-node
+ pl061                  8           8           0  /smb/gpio@e0080000
+ pl061                  8           8           0  /smb/gpio@e1050000
+ pMSI                   0           0           0  /interrupt-controller@e1101000/v2m@e0080000
+ MSI                   37           0           0  /interrupt-controller@e1101000/v2m@e0080000
+ GICv2m                37           0           0  /interrupt-controller@e1101000/v2m@e0080000
+ GICv2                448         448           0  /interrupt-controller@e1101000
+
+it also iterates over the interrupts to display their mapping in the
+domains, and makes the domain stacking visible:
+
+
+irq    hwirq    chip name        chip data           active  type            domain
+    1  0x00019  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
+    2  0x0001d  GICv2            0xffff00000916bfd8          LINEAR          GICv2
+    3  0x0001e  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
+    4  0x0001b  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
+    5  0x0001a  GICv2            0xffff00000916bfd8          LINEAR          GICv2
+[...]
+   96  0x81808  MSI              0x          (null)           RADIX          MSI
+   96+ 0x00063  GICv2m           0xffff8003ee116980           RADIX          GICv2m
+   96+ 0x00063  GICv2            0xffff00000916bfd8          LINEAR          GICv2
+   97  0x08800  MSI              0x          (null)     *     RADIX          MSI
+   97+ 0x00064  GICv2m           0xffff8003ee116980     *     RADIX          GICv2m
+   97+ 0x00064  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
+
+Here, interrupts 1-5 are only using a single domain, while 96 and 97
+are build out of a stack of three domain, each level performing a
+particular function.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
index 81cd3692405e..4ae553eb333d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
@@ -3,8 +3,11 @@ Allwinner Sunxi NMI Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sun7i-a20-sc-nmi" or
-  "allwinner,sun6i-a31-sc-nmi" or "allwinner,sun9i-a80-nmi"
+- compatible : should be one of the following:
+  - "allwinner,sun7i-a20-sc-nmi"
+  - "allwinner,sun6i-a31-sc-nmi" (deprecated)
+  - "allwinner,sun6i-a31-r-intc"
+  - "allwinner,sun9i-a80-nmi"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
new file mode 100644
index 000000000000..033cc82e5684
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
@@ -0,0 +1,25 @@
+Device tree configuration for the I2C Interrupt Controller on the AST24XX and
+AST25XX SoCs.
+
+Required Properties:
+- #address-cells	: should be 1
+- #size-cells 		: should be 1
+- #interrupt-cells 	: should be 1
+- compatible 		: should be "aspeed,ast2400-i2c-ic"
+			  or "aspeed,ast2500-i2c-ic"
+- reg			: address start and range of controller
+- interrupts		: interrupt number
+- interrupt-controller	: denotes that the controller receives and fires
+			  new interrupts for child busses
+
+Example:
+
+i2c_ic: interrupt-controller@0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#interrupt-cells = <1>;
+	compatible = "aspeed,ast2400-i2c-ic";
+	reg = <0x0 0x40>;
+	interrupts = <12>;
+	interrupt-controller;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
index 6c6e85324b9d..e3fea0758d25 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
@@ -1,12 +1,13 @@
 Aspeed Vectored Interrupt Controller
 
-These bindings are for the Aspeed AST2400 interrupt controller register layout.
-The SoC has an legacy register layout, but this driver does not support that
-mode of operation.
+These bindings are for the Aspeed interrupt controller. The AST2400 and
+AST2500 SoC families include a legacy register layout before a re-designed
+layout, but the bindings do not prescribe the use of one or the other.
 
 Required properties:
 
-- compatible : should be "aspeed,ast2400-vic".
+- compatible : "aspeed,ast2400-vic"
+               "aspeed,ast2500-vic"
 
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
new file mode 100644
index 000000000000..64a00ceb7da4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
@@ -0,0 +1,27 @@
+Marvell GICP Controller
+-----------------------
+
+GICP is a Marvell extension of the GIC that allows to trigger GIC SPI
+interrupts by doing a memory transaction. It is used by the ICU
+located in the Marvell CP110 to turn wired interrupts inside the CP
+into GIC SPI interrupts.
+
+Required properties:
+
+- compatible: Must be "marvell,ap806-gicp"
+
+- reg: Must be the address and size of the GICP SPI registers
+
+- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available
+  for this GICP
+
+- msi-controller: indicates that this is an MSI controller
+
+Example:
+
+gicp_spi: gicp-spi@3f0040 {
+	compatible = "marvell,ap806-gicp";
+	reg = <0x3f0040 0x10>;
+	marvell,spi-ranges = <64 64>, <288 64>;
+	msi-controller;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
new file mode 100644
index 000000000000..aa8bf2ec8905
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
@@ -0,0 +1,51 @@
+Marvell ICU Interrupt Controller
+--------------------------------
+
+The Marvell ICU (Interrupt Consolidation Unit) controller is
+responsible for collecting all wired-interrupt sources in the CP and
+communicating them to the GIC in the AP, the unit translates interrupt
+requests on input wires to MSG memory mapped transactions to the GIC.
+
+Required properties:
+
+- compatible: Should be "marvell,cp110-icu"
+
+- reg: Should contain ICU registers location and length.
+
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 3.
+
+  The 1st cell is the group type of the ICU interrupt. Possible group
+  types are:
+
+   ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
+   ICU_GRP_SR  (0x1) : Shared peripheral interrupt, secure
+   ICU_GRP_SEI (0x4) : System error interrupt
+   ICU_GRP_REI (0x5) : RAM error interrupt
+
+  The 2nd cell is the index of the interrupt in the ICU unit.
+
+  The 3rd cell is the type of the interrupt. See arm,gic.txt for
+  details.
+
+- interrupt-controller: Identifies the node as an interrupt
+  controller.
+
+- msi-parent: Should point to the GICP controller, the GIC extension
+  that allows to trigger interrupts using MSG memory mapped
+  transactions.
+
+Example:
+
+icu: interrupt-controller@1e0000 {
+	compatible = "marvell,cp110-icu";
+	reg = <0x1e0000 0x10>;
+	#interrupt-cells = <3>;
+	interrupt-controller;
+	msi-parent = <&gicp>;
+};
+
+usb3h0: usb3@500000 {
+	interrupt-parent = <&icu>;
+	interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index e72587fe477d..6a6618f34440 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -311,6 +311,8 @@ IRQ
   devm_irq_alloc_desc_at()
   devm_irq_alloc_desc_from()
   devm_irq_alloc_descs_from()
+  devm_irq_alloc_generic_chip()
+  devm_irq_setup_generic_chip()
 
 LED
   devm_led_classdev_register()