diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-11-03 14:51:08 -1000 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-11-03 14:51:08 -1000 |
| commit | d99b91a99be430be45413052bb428107c435918b (patch) | |
| tree | 61f44b60b9423760c1b078421d1ebabcb6cf7ae2 /Documentation | |
| parent | e392ea4d4d00880bf94550151b1ace4f88a4b17a (diff) | |
| parent | fa10f413091a43f801f82b3cf484f15d6fc9266f (diff) | |
Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
Diffstat (limited to 'Documentation')
51 files changed, 1391 insertions, 429 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-cdx b/Documentation/ABI/testing/sysfs-bus-cdx index 7af477f49998..8c067ff99e54 100644 --- a/Documentation/ABI/testing/sysfs-bus-cdx +++ b/Documentation/ABI/testing/sysfs-bus-cdx @@ -28,14 +28,57 @@ Description: of a device manufacturer. Combination of Vendor ID and Device ID identifies a device. +What: /sys/bus/cdx/devices/.../subsystem_vendor +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + Subsystem Vendor ID for this CDX device, in hexadecimal. + Subsystem Vendor ID is 16 bit identifier specific to the + card manufacturer. + +What: /sys/bus/cdx/devices/.../subsystem_device +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + Subsystem Device ID for this CDX device, in hexadecimal + Subsystem Device ID is 16 bit identifier specific to the + card manufacturer. + +What: /sys/bus/cdx/devices/.../class +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + This file contains the class of the CDX device, in hexadecimal. + Class is 24 bit identifier specifies the functionality of the device. + +What: /sys/bus/cdx/devices/.../revision +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + This file contains the revision field of the CDX device, in hexadecimal. + Revision is 8 bit revision identifier of the device. + +What: /sys/bus/cdx/devices/.../enable +Date: October 2023 +Contact: abhijit.gangurde@amd.com +Description: + CDX bus should be disabled before updating the devices in FPGA. + Writing n/0/off will attempt to disable the CDX bus and. + writing y/1/on will attempt to enable the CDX bus. Reading this file + gives the current state of the bus, 1 for enabled and 0 for disabled. + + For example:: + + # echo 1 > /sys/bus/cdx/.../enable + What: /sys/bus/cdx/devices/.../reset Date: March 2023 Contact: nipun.gupta@amd.com Description: - Writing y/1/on to this file resets the CDX device. - On resetting the device, the corresponding driver is notified - twice, once before the device is being reset, and again after - the reset has been complete. + Writing y/1/on to this file resets the CDX device or all devices + on the bus. On resetting the device, the corresponding driver is + notified twice, once before the device is being reset, and again + after the reset has been complete. For example:: @@ -54,3 +97,18 @@ Description: For example:: # echo 1 > /sys/bus/cdx/devices/.../remove + +What: /sys/bus/cdx/devices/.../modalias +Date: July 2023 +Contact: nipun.gupta@amd.com +Description: + This attribute indicates the CDX ID of the device. + That is in the format: + cdx:vXXXXdXXXXsvXXXXsdXXXXcXXXXXX, + where: + + - vXXXX contains the vendor ID; + - dXXXX contains the device ID; + - svXXXX contains the subsystem vendor ID; + - sdXXXX contains the subsystem device ID; + - cXXXXXX contains the device class. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index a2854dc9a839..19cde14f3869 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -279,6 +279,35 @@ Description: but should match other such assignments on device). Units after application of scale and offset are m/s^2. +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_z_raw +KernelVersion: 6.5 +Contact: linux-iio@vger.kernel.org +Description: + Angular displacement between two consecutive samples on x, y or + z (may be arbitrarily assigned but should match other such + assignments on device). + In order to compute the total angular displacement during a + desired period of time, the application should sum-up the delta + angle samples acquired during that time. + Units after application of scale and offset are radians. + +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_z_raw +KernelVersion: 6.5 +Contact: linux-iio@vger.kernel.org +Description: + The linear velocity change between two consecutive samples on x, + y or z (may be arbitrarily assigned but should match other such + assignments on device). + In order to compute the total linear velocity change during a + desired period of time, the application should sum-up the delta + velocity samples acquired during that time. + Units after application of scale and offset are meters per + second. + What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw KernelVersion: 4.17 @@ -461,6 +490,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_scale +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_scale What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale @@ -1332,6 +1363,12 @@ Description: What: /sys/.../iio:deviceX/bufferY/in_accel_x_en What: /sys/.../iio:deviceX/bufferY/in_accel_y_en What: /sys/.../iio:deviceX/bufferY/in_accel_z_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_en @@ -1362,6 +1399,8 @@ Description: Scan element control for triggered data capture. What: /sys/.../iio:deviceX/bufferY/in_accel_type +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_type +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_type What: /sys/.../iio:deviceX/bufferY/in_anglvel_type What: /sys/.../iio:deviceX/bufferY/in_magn_type What: /sys/.../iio:deviceX/bufferY/in_incli_type @@ -1416,6 +1455,12 @@ What: /sys/.../iio:deviceX/bufferY/in_voltage_q_index What: /sys/.../iio:deviceX/bufferY/in_accel_x_index What: /sys/.../iio:deviceX/bufferY/in_accel_y_index What: /sys/.../iio:deviceX/bufferY/in_accel_z_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_index @@ -2179,3 +2224,33 @@ Contact: linux-iio@vger.kernel.org Description: Number of conditions that must occur, during a running period, before an event is generated. + +What: /sys/bus/iio/devices/iio:deviceX/in_colortemp_raw +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Represents light color temperature, which measures light color + temperature in Kelvin. + +What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_y_raw +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + The x and y light color coordinate on the CIE 1931 chromaticity + diagram. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_either_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_falling_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_anglvelY_mag_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_anglY_thresh_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_phaseY_mag_rising_label +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Optional symbolic label to a device channel event. + If a label is defined for this event add that to the event + specific attributes. This is useful for userspace to be able to + better identify an individual event. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 new file mode 100644 index 000000000000..b168aa44b233 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 @@ -0,0 +1,53 @@ +What: /sys/bus/iio/devices/iio:deviceX/boost_current_gain +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to set the gain of the biasing current + circuit of the Delta-Sigma modulator. The different BOOST + settings are applied to the entire modulator circuit, including + the voltage reference buffers. + +What: /sys/bus/iio/devices/iio:deviceX/boost_current_gain_available +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns a list with the possible gain values for + the current biasing circuit of the Delta-Sigma modulator. + +What: /sys/bus/iio/devices/iio:deviceX/auto_zeroing_mux_enable +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to enable the analog input multiplexer + auto-zeroing algorithm (the input multiplexer and the ADC + include an offset cancellation algorithm that cancels the offset + contribution of the ADC). When the offset cancellation algorithm + is enabled, ADC takes two conversions, one with the differential + input as VIN+/VIN-, one with VIN+/VIN- inverted. In this case the + conversion time is multiplied by two compared to the default + case where the algorithm is disabled. This technique allows the + cancellation of the ADC offset error and the achievement of + ultra-low offset without any digital calibration. The resulting + offset is the residue of the difference between the two + conversions, which is on the order of magnitude of the noise + floor. This offset is effectively canceled at every conversion, + so the residual offset error temperature drift is extremely low. + Write '1' to enable it, write '0' to disable it. + +What: /sys/bus/iio/devices/iio:deviceX/auto_zeroing_ref_enable +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to enable the chopping algorithm for the + internal voltage reference buffer. This setting has no effect + when external voltage reference is selected. + Internal voltage reference buffer injects a certain quantity of + 1/f noise into the system that can be modulated with the + incoming input signals and can limit the SNR performance at + higher Oversampling Ratio values (over 256). To overcome this + limitation, the buffer includes an auto-zeroing algorithm that + greatly reduces (cancels out) the 1/f noise and cancels the + offset value of the reference buffer. As a result, the SNR of + the system is not affected by this 1/f noise component of the + reference buffer, even at maximum oversampling ratio values. + Write '1' to enable it, write '0' to disable it. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 b/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 new file mode 100644 index 000000000000..f92c79342b93 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 @@ -0,0 +1,27 @@ +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_max +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the current Degradation of Signal Reset Maximum + Threshold value in millivolts. Writing sets the value. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_max_available +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the allowable voltage range for + in_altvoltage0_mag_rising_reset_max. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_min +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the current Degradation of Signal Reset Minimum + Threshold value in millivolts. Writing sets the value. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_min_available +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the allowable voltage range for + in_altvoltage0_mag_rising_reset_min. diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 98139489d4b5..bfff71ff3d6a 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: /schemas/nvmem/nvmem.yaml + - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml select: properties: diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml index 986df1a6ff0a..66ea894dbe55 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml @@ -4,19 +4,23 @@ $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM/Kionix KX022A Accelerometer +title: ROHM/Kionix KX022A, KX132-1211 and KX132ACR-LBZ Accelerometers maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | - KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges, - output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering. - KX022A can be accessed either via I2C or SPI. + KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting + +/- 2G, 4G, 8G and 16G ranges, variable output data-rates and a + hardware-fifo buffering. These accelerometers can be accessed either + via I2C or SPI. properties: compatible: - const: kionix,kx022a + enum: + - kionix,kx022a + - kionix,kx132-1211 + - rohm,kx132acr-lbz reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml index 875f394576c2..5cc6a9684077 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -4,21 +4,31 @@ $id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Linear Technology / Analog Devices LTC2497 ADC +title: Linear Technology / Analog Devices LTC2497 and LTC2309 ADC maintainers: - Michael Hennerich <michael.hennerich@analog.com> + - Liam Beguin <liambeguin@gmail.com> description: | - 16bit ADC supporting up to 16 single ended or 8 differential inputs. - I2C interface. + LTC2309: + low noise, low power, 8-channel, 12-bit successive approximation ADC with an + I2C compatible serial interface. - https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf - https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf + + LTC2497: + LTC2499: + 16bit ADC supporting up to 16 single ended or 8 differential inputs. + I2C interface. + + https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf properties: compatible: enum: + - lltc,ltc2309 - lltc,ltc2497 - lltc,ltc2499 diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml new file mode 100644 index 000000000000..675319276197 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP346X and MCP356X ADC Family + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit + Delta-Sigma ADCs with an SPI interface. Datasheet can be found here: + Datasheet for MCP3561, MCP3562, MCP3564 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf + Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf + Datasheet for MCP3461, MCP3462, MCP3464 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf + Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf + +properties: + compatible: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3461r + - microchip,mcp3462r + - microchip,mcp3464r + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + - microchip,mcp3561r + - microchip,mcp3562r + - microchip,mcp3564r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + spi-cpha: true + + spi-cpol: true + + vdd-supply: true + + avdd-supply: true + + clocks: + description: + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + drive-open-drain: + description: + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note + that the device requires this pin to become "high", otherwise it will stop + converting. + type: boolean + + vref-supply: + description: + Some devices have a specific reference voltage supplied on a different + pin to the other supplies. Needed to be able to establish channel scaling + unless there is also an internal reference available (e.g. mcp3564r). In + case of "r" devices (e. g. mcp3564r), if it does not exists the internal + reference will be used. + + microchip,hw-device-address: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + description: + The address is set on a per-device basis by fuses in the factory, + configured on request. If not requested, the fuses are set for 0x1. + The device address is part of the device markings to avoid + potential confusion. This address is coded on two bits, so four possible + addresses are available when multiple devices are present on the same + SPI bus with only one Chip Select line for all devices. + Each device communication starts by a CS falling edge, followed by the + clocking of the device address (BITS[7:6] - top two bits of COMMAND BYTE + which is first one on the wire). + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@([0-9]|([1-7][0-9]))$": + $ref: adc.yaml + type: object + unevaluatedProperties: false + description: Represents the external channels which are connected to the ADC. + + properties: + reg: + description: The channel number in single-ended and differential mode. + minimum: 0 + maximum: 79 + + required: + - reg + +dependencies: + spi-cpol: [ spi-cpha ] + spi-cpha: [ spi-cpol ] + +required: + - compatible + - reg + - microchip,hw-device-address + - spi-max-frequency + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - # External vref, no internal reference + if: + properties: + compatible: + contains: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + then: + required: + - vref-supply + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3564r"; + reg = <0>; + vref-supply = <&vref_reg>; + spi-cpha; + spi-cpol; + spi-max-frequency = <10000000>; + microchip,hw-device-address = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + /* CH0 to AGND */ + reg = <0>; + label = "CH0"; + }; + + channel@1 { + /* CH1 to AGND */ + reg = <1>; + label = "CH1"; + }; + + /* diff-channels */ + channel@11 { + reg = <11>; + + /* CN0, CN1 */ + diff-channels = <0 1>; + label = "CH0_CH1"; + }; + + channel@22 { + reg = <0x22>; + + /* CN1, CN2 */ + diff-channels = <1 2>; + label = "CH1_CH3"; + }; + + channel@23 { + reg = <0x23>; + + /* CN1, CN3 */ + diff-channels = <1 3>; + label = "CH1_CH3"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index f7b3fde4115a..06951ec5f5da 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -18,7 +18,13 @@ description: | properties: compatible: enum: + - microchip,mcp3910 - microchip,mcp3911 + - microchip,mcp3912 + - microchip,mcp3913 + - microchip,mcp3914 + - microchip,mcp3918 + - microchip,mcp3919 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index e004659099c1..d605999ffe28 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -23,6 +23,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml new file mode 100644 index 000000000000..e779a8986e0b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,twl6030-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPADC subsystem in the TWL6030 power module + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: + The GPADC subsystem in the TWL603X consists of a 10-bit ADC + combined with a 15-input analog multiplexer in the TWL6030 resp. a + 19-input analog muliplexer in the TWL6032. + +properties: + compatible: + enum: + - ti,twl6030-gpadc + - ti,twl6032-gpadc + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + gpadc { + compatible = "ti,twl6030-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 9fda56fa49c3..2ee6080deac7 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -4,20 +4,26 @@ $id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: HMC425A 6-bit Digital Step Attenuator +title: Analog Devices HMC425A and similar Digital Step Attenuators maintainers: - Michael Hennerich <michael.hennerich@analog.com> description: | - Digital Step Attenuator IIO device with gpio interface. + Digital Step Attenuator IIO devices with gpio interface. + Offer various frequency and attenuation ranges. HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz - https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + + HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + properties: compatible: enum: - adi,hmc425a + - adi,hmc540s vcc-supply: true diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 1db6952ddca5..297b8a1a7ffb 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -48,6 +48,11 @@ properties: mount-matrix: true + invensense,level-shifter: + type: boolean + description: | + From ancient platform data struct: false: VLogic, true: VDD + i2c-gate: $ref: /schemas/i2c/i2c-controller.yaml unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index ee8724ad33ab..28b667a9cb76 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -93,6 +93,9 @@ properties: wakeup-source: $ref: /schemas/types.yaml#/definitions/flag + mount-matrix: + description: an optional 3x3 mounting rotation matrix + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml new file mode 100644 index 000000000000..7c4ca6322bf8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/rohm,bm1390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BM1390 pressure sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: + BM1390GLV-Z is a pressure sensor which performs internal temperature + compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa + and sample averaging and IIR filtering is built in. Temperature + measurement is also supported. + +properties: + compatible: + const: rohm,bm1390glv-z + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure-sensor@5d { + compatible = "rohm,bm1390glv-z"; + reg = <0x5d>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vdd>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml new file mode 100644 index 000000000000..8980b3cd8337 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/resolver/adi,ad2s1210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD2S1210 Resolver-to-Digital Converter + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The AD2S1210 is a complete 10-bit to 16-bit resolution tracking + resolver-to-digital converter, integrating an on-board programmable + sinusoidal oscillator that provides sine wave excitation for + resolvers. + + The AD2S1210 allows the user to read the angular position or the + angular velocity data directly from the parallel outputs or through + the serial interface. + + The mode of operation of the communication channel (parallel or serial) is + selected by the A0 and A1 input pins. In normal mode, data is latched by + toggling the SAMPLE line and can then be read directly. In configuration mode, + data is read or written using a register access scheme (address byte with + read/write flag and data byte). + + A1 A0 Result + 0 0 Normal mode - position output + 0 1 Normal mode - velocity output + 1 0 Reserved + 1 1 Configuration mode + + In normal mode, the resolution of the digital output is selected using + the RES0 and RES1 input pins. In configuration mode, the resolution is + selected by setting the RES0 and RES1 bits in the control register. + + RES1 RES0 Resolution (Bits) + 0 0 10 + 0 1 12 + 1 0 14 + 1 1 16 + + Note on SPI connections: The CS line on the AD2S1210 should hard-wired to + logic low and the WR/FSYNC line on the AD2S1210 should be connected to the + SPI CSn output of the SPI controller. + + Datasheet: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf + +properties: + compatible: + const: adi,ad2s1210 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 25000000 + + spi-cpha: true + + avdd-supply: + description: + A 4.75 to 5.25 V regulator that powers the Analog Supply Voltage (AVDD) + pin. + + dvdd-supply: + description: + A 4.75 to 5.25 V regulator that powers the Digital Supply Voltage (DVDD) + pin. + + vdrive-supply: + description: + A 2.3 to 5.25 V regulator that powers the Logic Power Supply Input + (VDrive) pin. + + clocks: + maxItems: 1 + description: External oscillator clock (CLKIN). + + reset-gpios: + description: + GPIO connected to the /RESET pin. As the line needs to be low for the + reset to be active, it should be configured as GPIO_ACTIVE_LOW. + maxItems: 1 + + sample-gpios: + description: + GPIO connected to the /SAMPLE pin. As the line needs to be low to trigger + a sample, it should be configured as GPIO_ACTIVE_LOW. + maxItems: 1 + + mode-gpios: + description: + GPIO lines connected to the A0 and A1 pins. These pins select the data + transfer mode. + minItems: 2 + maxItems: 2 + + resolution-gpios: + description: + GPIO lines connected to the RES0 and RES1 pins. These pins select the + resolution of the digital output. If omitted, it is assumed that the + RES0 and RES1 pins are hard-wired to match the assigned-resolution-bits + property. + minItems: 2 + maxItems: 2 + + fault-gpios: + description: + GPIO lines connected to the LOT and DOS pins. These pins combined indicate + the type of fault present, if any. As these pins a pulled low to indicate + a fault condition, they should be configured as GPIO_ACTIVE_LOW. + minItems: 2 + maxItems: 2 + + adi,fixed-mode: + description: + This is used to indicate the selected mode if A0 and A1 are hard-wired + instead of connected to GPIOS (i.e. mode-gpios is omitted). + $ref: /schemas/types.yaml#/definitions/string + enum: [config, velocity, position] + + assigned-resolution-bits: + description: + Resolution of the digital output required by the application. This + determines the precision of the angle and/or the maximum speed that can + be measured. If resolution-gpios is omitted, it is assumed that RES0 and + RES1 are hard-wired to match this value. + enum: [10, 12, 14, 16] + +required: + - compatible + - reg + - spi-cpha + - avdd-supply + - dvdd-supply + - vdrive-supply + - clocks + - sample-gpios + - assigned-resolution-bits + +oneOf: + - required: + - mode-gpios + - required: + - adi,fixed-mode + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + resolver@0 { + compatible = "adi,ad2s1210"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + avdd-supply = <&avdd_regulator>; + dvdd-supply = <&dvdd_regulator>; + vdrive-supply = <&vdrive_regulator>; + clocks = <&ext_osc>; + sample-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>; + mode-gpios = <&gpio0 86 0>, <&gpio0 87 0>; + resolution-gpios = <&gpio0 88 0>, <&gpio0 89 0>; + assigned-resolution-bits = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml new file mode 100644 index 000000000000..fd15ab5014fb --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,msm8939.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8939 Network-On-Chip interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: | + The Qualcomm MSM8939 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +allOf: + - $ref: qcom,rpm-common.yaml# + +properties: + compatible: + enum: + - qcom,msm8939-bimc + - qcom,msm8939-pcnoc + - qcom,msm8939-snoc + + reg: + maxItems: 1 + +patternProperties: + '^interconnect-[a-z0-9\-]+$': + type: object + $ref: qcom,rpm-common.yaml# + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + allOf: + - $ref: qcom,rpm-common.yaml# + + properties: + compatible: + const: qcom,msm8939-snoc-mm + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + + snoc: interconnect@580000 { + compatible = "qcom,msm8939-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8939-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8939-snoc-mm"; + #interconnect-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml new file mode 100644 index 000000000000..e3f964aaad1b --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,msm8996.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8996 Network-On-Chip interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: | + The Qualcomm MSM8996 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +properties: + compatible: + enum: + - qcom,msm8996-a0noc + - qcom,msm8996-a1noc + - qcom,msm8996-a2noc + - qcom,msm8996-bimc + - qcom,msm8996-cnoc + - qcom,msm8996-mnoc + - qcom,msm8996-pnoc + - qcom,msm8996-snoc + + reg: + maxItems: 1 + + clock-names: + minItems: 1 + maxItems: 3 + + clocks: + minItems: 1 + maxItems: 3 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: qcom,rpm-common.yaml# + - if: + properties: + compatible: + const: qcom,msm8996-a0noc + + then: + properties: + clocks: + items: + - description: Aggregate0 System NoC AXI Clock. + - description: Aggregate0 Config NoC AHB Clock. + - description: Aggregate0 NoC MPU Clock. + + clock-names: + items: + - const: aggre0_snoc_axi + - const: aggre0_cnoc_ahb + - const: aggre0_noc_mpu_cfg + + required: + - power-domains + + - if: + properties: + compatible: + const: qcom,msm8996-mnoc + + then: + properties: + clocks: + items: + - description: CPU-NoC High-performance Bus Clock. + + clock-names: + const: iface + + - if: + properties: + compatible: + const: qcom,msm8996-a2noc + + then: + properties: + clocks: + items: + - description: Aggregate2 NoC UFS AXI Clock + - description: UFS AXI Clock + + clock-names: + items: + - const: aggre2_ufs_axi + - const: ufs_axi + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + + bimc: interconnect@408000 { + compatible = "qcom,msm8996-bimc"; + reg = <0x00408000 0x5a000>; + #interconnect-cells = <1>; + }; + + a0noc: interconnect@543000 { + compatible = "qcom,msm8996-a0noc"; + reg = <0x00543000 0x6000>; + #interconnect-cells = <1>; + clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, + <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, + <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; + clock-names = "aggre0_snoc_axi", + "aggre0_cnoc_ahb", + "aggre0_noc_mpu_cfg"; + power-domains = <&gcc AGGRE0_NOC_GDSC>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml index f65a2fe846de..b6c15314c5c5 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml @@ -13,6 +13,9 @@ description: | The Qualcomm QCM2290 interconnect providers support adjusting the bandwidth requirements between the various NoC fabrics. +allOf: + - $ref: qcom,rpm-common.yaml# + properties: reg: maxItems: 1 @@ -23,19 +26,6 @@ properties: - qcom,qcm2290-cnoc - qcom,qcm2290-snoc - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - # Child node's properties patternProperties: '^interconnect-[a-z0-9]+$': @@ -44,6 +34,9 @@ patternProperties: The interconnect providers do not have a separate QoS register space, but share parent's space. + allOf: + - $ref: qcom,rpm-common.yaml# + properties: compatible: enum: @@ -51,35 +44,16 @@ patternProperties: - qcom,qcm2290-mmrt-virt - qcom,qcm2290-mmnrt-virt - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - required: - compatible - - '#interconnect-cells' - - clock-names - - clocks - additionalProperties: false + unevaluatedProperties: false required: - compatible - reg - - '#interconnect-cells' - - clock-names - - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -89,32 +63,20 @@ examples: compatible = "qcom,qcm2290-snoc"; reg = <0x01880000 0x60200>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; qup_virt: interconnect-qup { compatible = "qcom,qcm2290-qup-virt"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_QUP_CLK>, - <&rpmcc RPM_SMD_QUP_A_CLK>; }; mmnrt_virt: interconnect-mmnrt { compatible = "qcom,qcm2290-mmnrt-virt"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_MMNRT_CLK>, - <&rpmcc RPM_SMD_MMNRT_A_CLK>; }; mmrt_virt: interconnect-mmrt { compatible = "qcom,qcm2290-mmrt-virt"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_MMRT_CLK>, - <&rpmcc RPM_SMD_MMRT_A_CLK>; }; }; @@ -122,16 +84,10 @@ examples: compatible = "qcom,qcm2290-cnoc"; reg = <0x01900000 0x8200>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_CNOC_CLK>, - <&rpmcc RPM_SMD_CNOC_A_CLK>; }; bimc: interconnect@4480000 { compatible = "qcom,qcm2290-bimc"; reg = <0x04480000 0x80000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml new file mode 100644 index 000000000000..1ea52b091609 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,rpm-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + RPM interconnect providers support for managing system bandwidth requirements + through manual requests based on either predefined values or as indicated by + the bus monitor hardware. Each provider node represents a NoC bus master, + driven by a dedicated clock source. + +properties: + '#interconnect-cells': + oneOf: + - const: 2 + - const: 1 + deprecated: true + +required: + - '#interconnect-cells' + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 4f95d512012a..08c1c6b9d7cf 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -7,13 +7,16 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm RPM Network-On-Chip Interconnect maintainers: - - Georgi Djakov <georgi.djakov@linaro.org> + - Georgi Djakov <djakov@kernel.org> description: | RPM interconnect providers support system bandwidth requirements through RPM processor. The provider is able to communicate with the RPM through the RPM shared memory device. +allOf: + - $ref: qcom,rpm-common.yaml# + properties: reg: maxItems: 1 @@ -23,259 +26,22 @@ properties: - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc - - qcom,msm8939-bimc - - qcom,msm8939-pcnoc - - qcom,msm8939-snoc - - qcom,msm8996-a0noc - - qcom,msm8996-a1noc - - qcom,msm8996-a2noc - - qcom,msm8996-bimc - - qcom,msm8996-cnoc - - qcom,msm8996-mnoc - - qcom,msm8996-pnoc - - qcom,msm8996-snoc - qcom,qcs404-bimc - qcom,qcs404-pcnoc - qcom,qcs404-snoc - - qcom,sdm660-a2noc - - qcom,sdm660-bimc - - qcom,sdm660-cnoc - - qcom,sdm660-gnoc - - qcom,sdm660-mnoc - - qcom,sdm660-snoc - - '#interconnect-cells': - description: | - Value: <1> is one cell in an interconnect specifier for the - interconnect node id, <2> requires the interconnect node id and an - extra path tag. - enum: [ 1, 2 ] - - clocks: - minItems: 2 - maxItems: 7 - - clock-names: - minItems: 2 - maxItems: 7 - - power-domains: - maxItems: 1 - -# Child node's properties -patternProperties: - '^interconnect-[a-z0-9]+$': - type: object - additionalProperties: false - description: - snoc-mm is a child of snoc, sharing snoc's register address space. - - properties: - compatible: - enum: - - qcom,msm8939-snoc-mm - - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - - required: - - compatible - - '#interconnect-cells' - - clock-names - - clocks required: - compatible - reg - - '#interconnect-cells' - - clock-names - - clocks - -additionalProperties: false - -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8916-bimc - - qcom,msm8916-pcnoc - - qcom,msm8916-snoc - - qcom,msm8939-bimc - - qcom,msm8939-pcnoc - - qcom,msm8939-snoc - - qcom,msm8996-a1noc - - qcom,msm8996-bimc - - qcom,msm8996-cnoc - - qcom,msm8996-pnoc - - qcom,msm8996-snoc - - qcom,qcs404-bimc - - qcom,qcs404-pcnoc - - qcom,qcs404-snoc - - qcom,sdm660-bimc - - qcom,sdm660-cnoc - - qcom,sdm660-gnoc - - qcom,sdm660-snoc - - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-mnoc - - qcom,sdm660-mnoc - - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - const: iface - - clocks: - items: - - description: Bus Clock. - - description: Bus A Clock. - - description: CPU-NoC High-performance Bus Clock. - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-a0noc - - then: - properties: - clock-names: - items: - - const: aggre0_snoc_axi - - const: aggre0_cnoc_ahb - - const: aggre0_noc_mpu_cfg - - clocks: - items: - - description: Aggregate0 System NoC AXI Clock. - - description: Aggregate0 Config NoC AHB Clock. - - description: Aggregate0 NoC MPU Clock. - - required: - - power-domains - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-a2noc - - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - const: aggre2_ufs_axi - - const: ufs_axi - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - - description: Aggregate2 NoC UFS AXI Clock - - description: UFS AXI Clock - - - if: - properties: - compatible: - contains: - enum: - - qcom,sdm660-a2noc - - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - const: ipa - - const: ufs_axi - - const: aggre2_ufs_axi - - const: aggre2_usb3_axi - - const: cfg_noc_usb2_axi - - clocks: - items: - - description: Bus Clock. - - description: Bus A Clock. - - description: IPA Clock. - - description: UFS AXI Clock. - - description: Aggregate2 UFS AXI Clock. - - description: Aggregate2 USB3 AXI Clock. - - description: Config NoC USB2 AXI Clock. - - - if: - not: - properties: - compatible: - contains: - enum: - - qcom,msm8939-snoc - then: - patternProperties: - '^interconnect-[a-z0-9]+$': false +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> bimc: interconnect@400000 { - compatible = "qcom,msm8916-bimc"; - reg = <0x00400000 0x62000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - - pcnoc: interconnect@500000 { - compatible = "qcom,msm8916-pcnoc"; - reg = <0x00500000 0x11000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; - }; - - snoc: interconnect@580000 { - compatible = "qcom,msm8916-snoc"; - reg = <0x00580000 0x14000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index a46497af1fd8..74ab080249ff 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -113,6 +113,7 @@ allOf: properties: compatible: enum: + - qcom,sdx65-mc-virt - qcom,sm8250-qup-virt then: required: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml new file mode 100644 index 000000000000..8f6bc6399626 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sdm660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM660 Network-On-Chip interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: | + The Qualcomm SDM660 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +properties: + compatible: + enum: + - qcom,sdm660-a2noc + - qcom,sdm660-bimc + - qcom,sdm660-cnoc + - qcom,sdm660-gnoc + - qcom,sdm660-mnoc + - qcom,sdm660-snoc + + reg: + maxItems: 1 + + clock-names: + minItems: 1 + maxItems: 5 + + clocks: + minItems: 1 + maxItems: 5 + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: qcom,rpm-common.yaml# + - if: + properties: + compatible: + const: qcom,sdm660-mnoc + + then: + properties: + clocks: + items: + - description: CPU-NoC High-performance Bus Clock. + + clock-names: + const: iface + + - if: + properties: + compatible: + const: qcom,sdm660-a2noc + + then: + properties: + clocks: + items: + - description: IPA Clock. + - description: UFS AXI Clock. + - description: Aggregate2 UFS AXI Clock. + - description: Aggregate2 USB3 AXI Clock. + - description: Config NoC USB2 AXI Clock. + + clock-names: + items: + - const: ipa + - const: ufs_axi + - const: aggre2_ufs_axi + - const: aggre2_usb3_axi + - const: cfg_noc_usb2_axi + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm660.h> + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + + bimc: interconnect@1008000 { + compatible = "qcom,sdm660-bimc"; + reg = <0x01008000 0x78000>; + #interconnect-cells = <1>; + }; + + a2noc: interconnect@1704000 { + compatible = "qcom,sdm660-a2noc"; + reg = <0x01704000 0xc100>; + #interconnect-cells = <1>; + clocks = <&rpmcc RPM_SMD_IPA_CLK>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; + clock-names = "ipa", + "ufs_axi", + "aggre2_ufs_axi", + "aggre2_usb3_axi", + "cfg_noc_usb2_axi"; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml new file mode 100644 index 000000000000..71cf7e252bfc --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sdx75-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SDX75 + +maintainers: + - Rohit Agarwal <quic_rohiagar@quicinc.com> + +description: + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + +properties: + compatible: + enum: + - qcom,sdx75-clk-virt + - qcom,sdx75-dc-noc + - qcom,sdx75-gem-noc + - qcom,sdx75-mc-virt + - qcom,sdx75-pcie-anoc + - qcom,sdx75-system-noc + + '#interconnect-cells': true + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx75-clk-virt + - qcom,sdx75-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx75-clk-virt + then: + properties: + clocks: + items: + - description: RPMH CC QPIC Clock + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + + clk_virt: interconnect-0 { + compatible = "qcom,sdx75-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + }; + + system_noc: interconnect@1640000 { + compatible = "qcom,sdx75-system-noc"; + reg = <0x1640000 0x4b400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index b82ca03e969c..f322290ee516 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -43,7 +43,12 @@ patternProperties: deprecated: true "^otp(-[0-9]+)?$": - $ref: ../nvmem/nvmem.yaml# + type: object + + allOf: + - $ref: ../nvmem/nvmem.yaml# + - $ref: ../nvmem/nvmem-deprecated-cells.yaml# + unevaluatedProperties: false description: | diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml index 5474d63268dc..9518281007af 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml @@ -19,6 +19,7 @@ maintainers: allOf: - $ref: /schemas/mtd/partitions/partition.yaml# - $ref: /schemas/nvmem/nvmem.yaml# + - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml new file mode 100644 index 000000000000..3dde10de4630 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Simplelink CC1352P7 wireless MCU + +description: + The CC1352P7 MCU can be connected via SPI or UART. + +maintainers: + - Ayush Singh <ayushdevel1325@gmail.com> + +properties: + compatible: + const: ti,cc1352p7 + + clocks: + items: + - description: high-frequency main system (MCU and peripherals) clock + - description: low-frequency system clock + + clock-names: + items: + - const: sclk_hf + - const: sclk_lf + + reset-gpios: + maxItems: 1 + + vdds-supply: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serial { + mcu { + compatible = "ti,cc1352p7"; + clocks = <&sclk_hf 0>, <&sclk_lf 25>; + clock-names = "sclk_hf", "sclk_lf"; + reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>; + vdds-supply = <&vdds>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml index 0928ec408170..4424c3c5e75c 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml index e49c2754ff55..9801fe6f91b5 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml index 84b3dfd21e09..b5cf740f96fa 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml index e0860b6b85f3..d3abdafdbca0 100644 --- a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml +++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml @@ -16,6 +16,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index 99e60d713dac..be1314454bec 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -16,6 +16,7 @@ description: | allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index 7ec2988b597e..cf5f9e22bb7e 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -16,6 +16,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml index a296d348adb4..cc25f2927682 100644 --- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml +++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml @@ -16,6 +16,7 @@ description: | allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml index a9b822aeaa7e..f43186f98607 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml new file mode 100644 index 000000000000..951af28bbfb3 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem-deprecated-cells.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM old syntax for fixed cells + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Before introducing NVMEM layouts all NVMEM (fixed) cells were defined + as direct device subnodes. That syntax was replaced by "fixed-layout" + and is deprecated now. No new bindings should use it. + +patternProperties: + "@[0-9a-f]+(,[0-7])?$": + type: object + allOf: + - $ref: layouts/fixed-cell.yaml + - properties: + compatible: false + deprecated: true + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index 9f921d940142..4fd015d402ce 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -46,15 +46,6 @@ properties: container may reference more advanced (dynamic) layout parsers. -patternProperties: - "@[0-9a-f]+(,[0-7])?$": - type: object - allOf: - - $ref: layouts/fixed-cell.yaml - - properties: - compatible: false - deprecated: true - additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 8740938c32eb..8c8f05d9eaf1 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml index 9b133f783d29..2ada2099946d 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml @@ -16,6 +16,7 @@ description: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index cd980def97b8..068bedf5dbc9 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -16,6 +16,7 @@ description: | allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml index 9c6eff788928..a44d44b32809 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml +++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml @@ -49,6 +49,7 @@ required: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# - if: properties: diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml index c5403e149080..b80fd8d1ae5b 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml index efccc5aacbe0..e27cbae2d63a 100644 --- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml index da3f1de7d281..af97eeb8316c 100644 --- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml index 36d97fb87865..9c36afc7084b 100644 --- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml +++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml @@ -51,6 +51,8 @@ properties: ethaddr: type: object description: Ethernet interfaces base MAC address. + additionalProperties: false + properties: "#nvmem-cell-cells": description: The first argument is a MAC address offset. diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml index 8bf7d3a9be98..3a4551253e3e 100644 --- a/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml @@ -13,6 +13,7 @@ maintainers: allOf: - $ref: rtc.yaml# - $ref: /schemas/nvmem/nvmem.yaml# + - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 9a1443ec3aaa..64b2ef083fdf 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -346,6 +346,8 @@ properties: # Silicon Labs SI3210 Programmable CMOS SLIC/CODEC with SPI interface - silabs,si3210 # Relative Humidity and Temperature Sensors + - silabs,si7005 + # Relative Humidity and Temperature Sensors - silabs,si7020 # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply - skyworks,sky81452 diff --git a/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml new file mode 100644 index 000000000000..6142b0b5b534 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/realtek,rtd-type-c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD SoCs USB Type-C Connector detection + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: + Realtek digital home center (DHC) RTD series SoCs include a type c module. + This module is able to detect the state of type c connector. + +properties: + compatible: + enum: + - realtek,rtd1295-type-c + - realtek,rtd1312c-type-c + - realtek,rtd1315e-type-c + - realtek,rtd1319-type-c + - realtek,rtd1319d-type-c + - realtek,rtd1395-type-c + - realtek,rtd1619-type-c + - realtek,rtd1619b-type-c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nvmem-cell-names: + items: + - const: usb-cal + + nvmem-cells: + maxItems: 1 + description: + The phandle to nvmem cell that contains the trimming data. + The type c parameter trimming data specified via efuse. + If unspecified, default value is used. + + realtek,rd-ctrl-gpios: + description: The gpio node to control external Rd on board. + maxItems: 1 + + connector: + $ref: /schemas/connector/usb-connector.yaml# + description: Properties for usb c connector. + type: object + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + type-c@7220 { + compatible = "realtek,rtd1619b-type-c"; + reg = <0x7220 0x20>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_cc1_pins>, <&usb_cc2_pins>; + nvmem-cells = <&otp_usb_cal>; + nvmem-cell-names = "usb-cal"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + }; + }; diff --git a/Documentation/misc-devices/eeprom.rst b/Documentation/misc-devices/eeprom.rst deleted file mode 100644 index 008249675ccc..000000000000 --- a/Documentation/misc-devices/eeprom.rst +++ /dev/null @@ -1,107 +0,0 @@ -==================== -Kernel driver eeprom -==================== - -Supported chips: - - * Any EEPROM chip in the designated address range - - Prefix: 'eeprom' - - Addresses scanned: I2C 0x50 - 0x57 - - Datasheets: Publicly available from: - - Atmel (www.atmel.com), - Catalyst (www.catsemi.com), - Fairchild (www.fairchildsemi.com), - Microchip (www.microchip.com), - Philips (www.semiconductor.philips.com), - Rohm (www.rohm.com), - ST (www.st.com), - Xicor (www.xicor.com), - and others. - - ========= ============= ============================================ - Chip Size (bits) Address - ========= ============= ============================================ - 24C01 1K 0x50 (shadows at 0x51 - 0x57) - 24C01A 1K 0x50 - 0x57 (Typical device on DIMMs) - 24C02 2K 0x50 - 0x57 - 24C04 4K 0x50, 0x52, 0x54, 0x56 - (additional data at 0x51, 0x53, 0x55, 0x57) - 24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52, - 0x53, 0x55, 0x56, 0x57) - 24C16 16K 0x50 (additional data at 0x51 - 0x57) - Sony 2K 0x57 - - Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37 - Catalyst 34FC02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Catalyst 34RC02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37 - ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37 - ========= ============= ============================================ - - -Authors: - - Frodo Looijaard <frodol@dds.nl>, - - Philip Edelbrock <phil@netroedge.com>, - - Jean Delvare <jdelvare@suse.de>, - - Greg Kroah-Hartman <greg@kroah.com>, - - IBM Corp. - -Description ------------ - -This is a simple EEPROM module meant to enable reading the first 256 bytes -of an EEPROM (on a SDRAM DIMM for example). However, it will access serial -EEPROMs on any I2C adapter. The supported devices are generically called -24Cxx, and are listed above; however the numbering for these -industry-standard devices may vary by manufacturer. - -This module was a programming exercise to get used to the new project -organization laid out by Frodo, but it should be at least completely -effective for decoding the contents of EEPROMs on DIMMs. - -DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants. -The other devices will not be found on a DIMM because they respond to more -than one address. - -DDC Monitors may contain any device. Often a 24C01, which responds to all 8 -addresses, is found. - -Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the -specification, so it is guess work and far from being complete. - -The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional -software write protect register at 0x30 - 0x37 (0x20 less than the memory -location). The chip responds to "write quick" detection at this address but -does not respond to byte reads. If this register is present, the lower 128 -bytes of the memory array are not write protected. Any byte data write to -this address will write protect the memory array permanently, and the -device will no longer respond at the 0x30-37 address. The eeprom driver -does not support this register. - -Lacking functionality ---------------------- - -* Full support for larger devices (24C04, 24C08, 24C16). These are not - typically found on a PC. These devices will appear as separate devices at - multiple addresses. - -* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512). - These devices require two-byte address fields and are not supported. - -* Enable Writing. Again, no technical reason why not, but making it easy - to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy - to disable the DIMMs (potentially preventing the computer from booting) - until the values are restored somehow. - -Use ---- - -After inserting the module (and any other required SMBus/i2c modules), you -should have some EEPROM directories in ``/sys/bus/i2c/devices/*`` of names such -as "0-0050". Inside each of these is a series of files, the eeprom file -contains the binary data from EEPROM. diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst index ecc40fbbcfb8..7de16797987a 100644 --- a/Documentation/misc-devices/index.rst +++ b/Documentation/misc-devices/index.rst @@ -17,7 +17,6 @@ fit into other categories. ad525x_dpot apds990x bh1770glc - eeprom c2port dw-xdata-pcie ibmvmc diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst index 41f1e07abfdf..1704f1c686d0 100644 --- a/Documentation/process/stable-kernel-rules.rst +++ b/Documentation/process/stable-kernel-rules.rst @@ -101,6 +101,19 @@ comment: git cherry-pick fd21073 git cherry-pick <this commit> + Note that for a patch series, you do not have to list as prerequisites the + patches present in the series itself. For example, if you have the following + patch series: + + .. code-block:: none + + patch1 + patch2 + + where patch2 depends on patch1, you do not have to list patch1 as + prerequisite of patch2 if you have already marked patch1 for stable + inclusion. + * For patches that may have kernel version prerequisites specify them using the following format in the sign-off area: |