Merge branch 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "This pull request contains:

   - i2c core reorganization. One source file became too monolithic. It
     is now split up, yet we still have the same named object as the
     final output. This should ease maintenance.

   - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX

   - designware driver gained slave mode support

   - xgene-slimpro driver gained ACPI support

   - bigger overhaul for pca-platform driver

   - the algo-bit module now supports messages with enforced STOP

   - slightly bigger than usual set of driver updates and improvements

  and with much appreciated quality assurance from Andy Shevchenko"

* 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits)
  i2c: Provide a stub for i2c_detect_slave_mode()
  i2c: designware: Let slave adapter support be optional
  i2c: designware: Make HW init functions static
  i2c: designware: fix spelling mistakes
  i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus
  i2c: pca-platform: correctly set algo_data.reset_chip
  i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices
  i2c: designware: enable SLAVE in platform module
  i2c: designware: add SLAVE mode functions
  i2c: zx2967: drop COMPILE_TEST dependency
  i2c: zx2967: always use the same device when printing errors
  i2c: pca-platform: use dev_warn/dev_info instead of printk
  i2c: pca-platform: use device managed allocations
  i2c: pca-platform: add devicetree awareness
  i2c: pca-platform: switch to struct gpio_desc
  dt-bindings: add bindings for i2c-pca-platform
  i2c: cadance: fix ctrl/addr reg write order
  i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family i2c controller
  i2c: algo-bit: add support for I2C_M_STOP
  ...

7 files changed, 127 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
new file mode 100644
index 000000000000..bd6480b19535
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -0,0 +1,48 @@
+Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs.
+
+Required Properties:
+- #address-cells	: should be 1
+- #size-cells		: should be 0
+- reg			: address offset and range of bus
+- compatible		: should be "aspeed,ast2400-i2c-bus"
+			  or "aspeed,ast2500-i2c-bus"
+- clocks		: root clock of bus, should reference the APB
+			  clock
+- interrupts		: interrupt number
+- interrupt-parent	: interrupt controller for bus, should reference a
+			  aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic
+			  interrupt controller
+
+Optional Properties:
+- bus-frequency	: frequency of the bus clock in Hz defaults to 100 kHz when not
+		  specified
+- multi-master	: states that there is another master active on this bus.
+
+Example:
+
+i2c {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x1e78a000 0x1000>;
+
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2400-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&clk_apb>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index fee26dc3e858..fbb0a6d8b964 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -20,7 +20,7 @@ Optional properties :
  - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
    This value which is by default 300ns is used to compute the tHIGH period.
 
-Example :
+Examples :
 
 	i2c@f0000 {
 		#address-cells = <1>;
@@ -43,3 +43,17 @@ Example :
 		i2c-sda-falling-time-ns = <300>;
 		i2c-scl-falling-time-ns = <300>;
 	};
+
+	i2c@1120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x2000 0x100>;
+		clock-frequency = <400000>;
+		clocks = <&i2cclk>;
+		interrupts = <0>;
+
+		eeprom@64 {
+			compatible = "linux,slave-24c02";
+			reg = <0x40000064>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
new file mode 100644
index 000000000000..f1f3876bb8e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
@@ -0,0 +1,29 @@
+* NXP PCA PCA9564/PCA9665 I2C controller
+
+The PCA9564/PCA9665 serves as an interface between most standard
+parallel-bus microcontrollers/microprocessors and the serial I2C-bus
+and allows the parallel bus system to communicate bi-directionally
+with the I2C-bus.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : one of "nxp,pca9564" or "nxp,pca9665"
+
+Optional properties
+ - interrupts : the interrupt number
+ - interrupt-parent : the phandle for the interrupt controller.
+   If an interrupt is not specified polling will be used.
+ - reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
+   is active low, it should be marked GPIO_ACTIVE_LOW.
+ - clock-frequency : I2C bus frequency.
+
+Example:
+	i2c0: i2c@80000 {
+		compatible = "nxp,pca9564";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x80000 0x4>;
+		reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
new file mode 100644
index 000000000000..cb806d1ae4c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
@@ -0,0 +1,22 @@
+ZTE zx2967 I2C controller
+
+Required properties:
+ - compatible: must be "zte,zx296718-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+ - clock-frequency: the desired I2C bus clock frequency.
+
+Examples:
+
+	i2c@112000 {
+		compatible = "zte,zx296718-i2c";
+		reg = <0x00112000 0x1000>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&osc24m>;
+		#address-cells = <1>
+		#size-cells = <0>;
+		clock-frequency = <1600000>;
+	};
diff --git a/Documentation/driver-api/i2c.rst b/Documentation/driver-api/i2c.rst
index 0bf86a445d01..7582c079d747 100644
--- a/Documentation/driver-api/i2c.rst
+++ b/Documentation/driver-api/i2c.rst
@@ -41,5 +41,8 @@ i2c_adapter devices which don't support those I2C operations.
 .. kernel-doc:: drivers/i2c/i2c-boardinfo.c
    :functions: i2c_register_board_info
 
-.. kernel-doc:: drivers/i2c/i2c-core.c
+.. kernel-doc:: drivers/i2c/i2c-core-base.c
+   :export:
+
+.. kernel-doc:: drivers/i2c/i2c-core-smbus.c
    :export:
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 820d9040de16..0500193434cb 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -34,6 +34,8 @@ Supported adapters:
   * Intel Broxton (SOC)
   * Intel Lewisburg (PCH)
   * Intel Gemini Lake (SOC)
+  * Intel Cannon Lake-H (PCH)
+  * Intel Cannon Lake-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface
index bcf919d8625c..5ff19447ac44 100644
--- a/Documentation/i2c/dev-interface
+++ b/Documentation/i2c/dev-interface
@@ -191,7 +191,7 @@ checking on future transactions.)
 4* Other ioctl() calls are converted to in-kernel function calls by
 i2c-dev. Examples include I2C_FUNCS, which queries the I2C adapter
 functionality using i2c.h:i2c_get_functionality(), and I2C_SMBUS, which
-performs an SMBus transaction using i2c-core.c:i2c_smbus_xfer().
+performs an SMBus transaction using i2c-core-smbus.c:i2c_smbus_xfer().
 
 The i2c-dev driver is responsible for checking all the parameters that
 come from user-space for validity. After this point, there is no
@@ -200,13 +200,13 @@ and calls that would have been performed by kernel I2C chip drivers
 directly. This means that I2C bus drivers don't need to implement
 anything special to support access from user-space.
 
-5* These i2c-core.c/i2c.h functions are wrappers to the actual
-implementation of your I2C bus driver. Each adapter must declare
-callback functions implementing these standard calls.
-i2c.h:i2c_get_functionality() calls i2c_adapter.algo->functionality(),
-while i2c-core.c:i2c_smbus_xfer() calls either
+5* These i2c.h functions are wrappers to the actual implementation of
+your I2C bus driver. Each adapter must declare callback functions
+implementing these standard calls. i2c.h:i2c_get_functionality() calls
+i2c_adapter.algo->functionality(), while
+i2c-core-smbus.c:i2c_smbus_xfer() calls either
 adapter.algo->smbus_xfer() if it is implemented, or if not,
-i2c-core.c:i2c_smbus_xfer_emulated() which in turn calls
+i2c-core-smbus.c:i2c_smbus_xfer_emulated() which in turn calls
 i2c_adapter.algo->master_xfer().
 
 After your I2C bus driver has processed these requests, execution runs