diff options
| author | Christoph Hellwig <hch@lst.de> | 2016-09-19 08:50:53 -0700 |
|---|---|---|
| committer | Martin K. Petersen <martin.petersen@oracle.com> | 2016-09-26 20:49:25 -0400 |
| commit | 92efbb8500230c883ca6966b0ef9f3e18c1e29ba (patch) | |
| tree | b282ab533cb049107ba0db2bd8b5dd20810ee291 /Documentation/scsi | |
| parent | f95819a09c2d6ff2e8a784ff46ba8836f937d07b (diff) | |
scsi: dtc: remove from tree
The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'Documentation/scsi')
| -rw-r--r-- | Documentation/scsi/dtc3x80.txt | 43 | ||||
| -rw-r--r-- | Documentation/scsi/scsi-parameters.txt | 3 |
2 files changed, 0 insertions, 46 deletions
diff --git a/Documentation/scsi/dtc3x80.txt b/Documentation/scsi/dtc3x80.txt deleted file mode 100644 index 1d7af9f9a8ed..000000000000 --- a/Documentation/scsi/dtc3x80.txt +++ /dev/null @@ -1,43 +0,0 @@ -README file for the Linux DTC3180/3280 scsi driver. -by Ray Van Tassle (rayvt@comm.mot.com) March 1996 -Based on the generic & core NCR5380 code by Drew Eckhard - -SCSI device driver for the DTC 3180/3280. -Data Technology Corp---a division of Qume. - -The 3280 has a standard floppy interface. - -The 3180 does not. Otherwise, they are identical. - -The DTC3x80 does not support DMA but it does have Pseudo-DMA which is -supported by the driver. - -Its DTC406 scsi chip is supposedly compatible with the NCR 53C400. -It is memory mapped, uses an IRQ, but no dma or io-port. There is -internal DMA, between SCSI bus and an on-chip 128-byte buffer. Double -buffering is done automagically by the chip. Data is transferred -between the on-chip buffer and CPU/RAM via memory moves. - -The driver detects the possible memory addresses (jumper selectable): - CC00, DC00, C800, and D800 -The possible IRQ's (jumper selectable) are: - IRQ 10, 11, 12, 15 -Parity is supported by the chip, but not by this driver. -Information can be obtained from /proc/scsi/dtc3c80/N. - -Note on interrupts: - -The documentation says that it can be set to interrupt whenever the -on-chip buffer needs CPU attention. I couldn't get this to work. So -the driver polls for data-ready in the pseudo-DMA transfer routine. -The interrupt support routines in the NCR3280.c core modules handle -scsi disconnect/reconnect, and this (mostly) works. However..... I -have tested it with 4 totally different hard drives (both SCSI-1 and -SCSI-2), and one CDROM drive. Interrupts works great for all but one -specific hard drive. For this one, the driver will eventually hang in -the transfer state. I have tested with: "dd bs=4k count=2k -of=/dev/null if=/dev/sdb". It reads ok for a while, then hangs. -After beating my head against this for a couple of weeks, getting -nowhere, I give up. So.....This driver does NOT use interrupts, even -if you have the card jumpered to an IRQ. Probably nobody will ever -care. diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 00a03c0cd8c2..8e66dafa41e1 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -34,9 +34,6 @@ parameters may be changed at runtime by the command See drivers/scsi/BusLogic.c, comment before function BusLogic_ParseDriverOptions(). - dtc3181e= [HW,SCSI] - See Documentation/scsi/g_NCR5380.txt. - eata= [HW,SCSI] fdomain= [HW,SCSI] |