diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/s390/Debugging390.txt | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/s390/Debugging390.txt')
| -rw-r--r-- | Documentation/s390/Debugging390.txt | 2536 |
1 files changed, 2536 insertions, 0 deletions
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt new file mode 100644 index 000000000000..adbfe620c061 --- /dev/null +++ b/Documentation/s390/Debugging390.txt @@ -0,0 +1,2536 @@ + + Debugging on Linux for s/390 & z/Architecture + by + Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation + Best viewed with fixed width fonts + +Overview of Document: +===================== +This document is intended to give an good overview of how to debug +Linux for s/390 & z/Architecture it isn't intended as a complete reference & not a +tutorial on the fundamentals of C & assembly, it dosen't go into +390 IO in any detail. It is intended to complement the documents in the +reference section below & any other worthwhile references you get. + +It is intended like the Enterprise Systems Architecture/390 Reference Summary +to be printed out & used as a quick cheat sheet self help style reference when +problems occur. + +Contents +======== +Register Set +Address Spaces on Intel Linux +Address Spaces on Linux for s/390 & z/Architecture +The Linux for s/390 & z/Architecture Kernel Task Structure +Register Usage & Stackframes on Linux for s/390 & z/Architecture +A sample program with comments +Compiling programs for debugging on Linux for s/390 & z/Architecture +Figuring out gcc compile errors +Debugging Tools +objdump +strace +Performance Debugging +Debugging under VM +s/390 & z/Architecture IO Overview +Debugging IO on s/390 & z/Architecture under VM +GDB on s/390 & z/Architecture +Stack chaining in gdb by hand +Examining core dumps +ldd +Debugging modules +The proc file system +Starting points for debugging scripting languages etc. +Dumptool & Lcrash +SysRq +References +Special Thanks + +Register Set +============ +The current architectures have the following registers. + +16 General propose registers, 32 bit on s/390 64 bit on z/Architecture, r0-r15 or gpr0-gpr15 used for arithmetic & addressing. + +16 Control registers, 32 bit on s/390 64 bit on z/Architecture, ( cr0-cr15 kernel usage only ) used for memory management, +interrupt control,debugging control etc. + +16 Access registers ( ar0-ar15 ) 32 bit on s/390 & z/Architecture +not used by normal programs but potentially could +be used as temporary storage. Their main purpose is their 1 to 1 +association with general purpose registers and are used in +the kernel for copying data between kernel & user address spaces. +Access register 0 ( & access register 1 on z/Architecture ( needs 64 bit +pointer ) ) is currently used by the pthread library as a pointer to +the current running threads private area. + +16 64 bit floating point registers (fp0-fp15 ) IEEE & HFP floating +point format compliant on G5 upwards & a Floating point control reg (FPC) +4 64 bit registers (fp0,fp2,fp4 & fp6) HFP only on older machines. +Note: +Linux (currently) always uses IEEE & emulates G5 IEEE format on older machines, +( provided the kernel is configured for this ). + + +The PSW is the most important register on the machine it +is 64 bit on s/390 & 128 bit on z/Architecture & serves the roles of +a program counter (pc), condition code register,memory space designator. +In IBM standard notation I am counting bit 0 as the MSB. +It has several advantages over a normal program counter +in that you can change address translation & program counter +in a single instruction. To change address translation, +e.g. switching address translation off requires that you +have a logical=physical mapping for the address you are +currently running at. + + Bit Value +s/390 z/Architecture +0 0 Reserved ( must be 0 ) otherwise specification exception occurs. + +1 1 Program Event Recording 1 PER enabled, + PER is used to facilititate debugging e.g. single stepping. + +2-4 2-4 Reserved ( must be 0 ). + +5 5 Dynamic address translation 1=DAT on. + +6 6 Input/Output interrupt Mask + +7 7 External interrupt Mask used primarily for interprocessor signalling & + clock interrupts. + +8-11 8-11 PSW Key used for complex memory protection mechanism not used under linux + +12 12 1 on s/390 0 on z/Architecture + +13 13 Machine Check Mask 1=enable machine check interrupts + +14 14 Wait State set this to 1 to stop the processor except for interrupts & give + time to other LPARS used in CPU idle in the kernel to increase overall + usage of processor resources. + +15 15 Problem state ( if set to 1 certain instructions are disabled ) + all linux user programs run with this bit 1 + ( useful info for debugging under VM ). + +16-17 16-17 Address Space Control + + 00 Primary Space Mode when DAT on + The linux kernel currently runs in this mode, CR1 is affiliated with + this mode & points to the primary segment table origin etc. + + 01 Access register mode this mode is used in functions to + copy data between kernel & user space. + + 10 Secondary space mode not used in linux however CR7 the + register affiliated with this mode is & this & normally + CR13=CR7 to allow us to copy data between kernel & user space. + We do this as follows: + We set ar2 to 0 to designate its + affiliated gpr ( gpr2 )to point to primary=kernel space. + We set ar4 to 1 to designate its + affiliated gpr ( gpr4 ) to point to secondary=home=user space + & then essentially do a memcopy(gpr2,gpr4,size) to + copy data between the address spaces, the reason we use home space for the + kernel & don't keep secondary space free is that code will not run in + secondary space. + + 11 Home Space Mode all user programs run in this mode. + it is affiliated with CR13. + +18-19 18-19 Condition codes (CC) + +20 20 Fixed point overflow mask if 1=FPU exceptions for this event + occur ( normally 0 ) + +21 21 Decimal overflow mask if 1=FPU exceptions for this event occur + ( normally 0 ) + +22 22 Exponent underflow mask if 1=FPU exceptions for this event occur + ( normally 0 ) + +23 23 Significance Mask if 1=FPU exceptions for this event occur + ( normally 0 ) + +24-31 24-30 Reserved Must be 0. + + 31 Extended Addressing Mode + 32 Basic Addressing Mode + Used to set addressing mode + PSW 31 PSW 32 + 0 0 24 bit + 0 1 31 bit + 1 1 64 bit + +32 1=31 bit addressing mode 0=24 bit addressing mode (for backward + compatibility ), linux always runs with this bit set to 1 + +33-64 Instruction address. + 33-63 Reserved must be 0 + 64-127 Address + In 24 bits mode bits 64-103=0 bits 104-127 Address + In 31 bits mode bits 64-96=0 bits 97-127 Address + Note: unlike 31 bit mode on s/390 bit 96 must be zero + when loading the address with LPSWE otherwise a + specification exception occurs, LPSW is fully backward + compatible. + + +Prefix Page(s) +-------------- +This per cpu memory area is too intimately tied to the processor not to mention. +It exists between the real addresses 0-4096 on s/390 & 0-8192 z/Architecture & is exchanged +with a 1 page on s/390 or 2 pages on z/Architecture in absolute storage by the set +prefix instruction in linux'es startup. +This page is mapped to a different prefix for each processor in an SMP configuration +( assuming the os designer is sane of course :-) ). +Bytes 0-512 ( 200 hex ) on s/390 & 0-512,4096-4544,4604-5119 currently on z/Architecture +are used by the processor itself for holding such information as exception indications & +entry points for exceptions. +Bytes after 0xc00 hex are used by linux for per processor globals on s/390 & z/Architecture +( there is a gap on z/Architecure too currently between 0xc00 & 1000 which linux uses ). +The closest thing to this on traditional architectures is the interrupt +vector table. This is a good thing & does simplify some of the kernel coding +however it means that we now cannot catch stray NULL pointers in the +kernel without hard coded checks. + + + +Address Spaces on Intel Linux +============================= + +The traditional Intel Linux is approximately mapped as follows forgive +the ascii art. +0xFFFFFFFF 4GB Himem ***************** + * * + * Kernel Space * + * * + ***************** **************** +User Space Himem (typically 0xC0000000 3GB )* User Stack * * * + ***************** * * + * Shared Libs * * Next Process * + ***************** * to * + * * <== * Run * <== + * User Program * * * + * Data BSS * * * + * Text * * * + * Sections * * * +0x00000000 ***************** **************** + +Now it is easy to see that on Intel it is quite easy to recognise a kernel address +as being one greater than user space himem ( in this case 0xC0000000). +& addresses of less than this are the ones in the current running program on this +processor ( if an smp box ). +If using the virtual machine ( VM ) as a debugger it is quite difficult to +know which user process is running as the address space you are looking at +could be from any process in the run queue. + +The limitation of Intels addressing technique is that the linux +kernel uses a very simple real address to virtual addressing technique +of Real Address=Virtual Address-User Space Himem. +This means that on Intel the kernel linux can typically only address +Himem=0xFFFFFFFF-0xC0000000=1GB & this is all the RAM these machines +can typically use. +They can lower User Himem to 2GB or lower & thus be +able to use 2GB of RAM however this shrinks the maximum size +of User Space from 3GB to 2GB they have a no win limit of 4GB unless +they go to 64 Bit. + + +On 390 our limitations & strengths make us slightly different. +For backward compatibility we are only allowed use 31 bits (2GB) +of our 32 bit addresses,however, we use entirely separate address +spaces for the user & kernel. + +This means we can support 2GB of non Extended RAM on s/390, & more +with the Extended memory management swap device & +currently 4TB of physical memory currently on z/Architecture. + + +Address Spaces on Linux for s/390 & z/Architecture +================================================== + +Our addressing scheme is as follows + + +Himem 0x7fffffff 2GB on s/390 ***************** **************** +currently 0x3ffffffffff (2^42)-1 * User Stack * * * +on z/Architecture. ***************** * * + * Shared Libs * * * + ***************** * * + * * * Kernel * + * User Program * * * + * Data BSS * * * + * Text * * * + * Sections * * * +0x00000000 ***************** **************** + +This also means that we need to look at the PSW problem state bit +or the addressing mode to decide whether we are looking at +user or kernel space. + +Virtual Addresses on s/390 & z/Architecture +=========================================== + +A virtual address on s/390 is made up of 3 parts +The SX ( segment index, roughly corresponding to the PGD & PMD in linux terminology ) +being bits 1-11. +The PX ( page index, corresponding to the page table entry (pte) in linux terminology ) +being bits 12-19. +The remaining bits BX (the byte index are the offset in the page ) +i.e. bits 20 to 31. + +On z/Architecture in linux we currently make up an address from 4 parts. +The region index bits (RX) 0-32 we currently use bits 22-32 +The segment index (SX) being bits 33-43 +The page index (PX) being bits 44-51 +The byte index (BX) being bits 52-63 + +Notes: +1) s/390 has no PMD so the PMD is really the PGD also. +A lot of this stuff is defined in pgtable.h. + +2) Also seeing as s/390's page indexes are only 1k in size +(bits 12-19 x 4 bytes per pte ) we use 1 ( page 4k ) +to make the best use of memory by updating 4 segment indices +entries each time we mess with a PMD & use offsets +0,1024,2048 & 3072 in this page as for our segment indexes. +On z/Architecture our page indexes are now 2k in size +( bits 12-19 x 8 bytes per pte ) we do a similar trick +but only mess with 2 segment indices each time we mess with +a PMD. + +3) As z/Architecture supports upto a massive 5-level page table lookup we +can only use 3 currently on Linux ( as this is all the generic kernel +currently supports ) however this may change in future +this allows us to access ( according to my sums ) +4TB of virtual storage per process i.e. +4096*512(PTES)*1024(PMDS)*2048(PGD) = 4398046511104 bytes, +enough for another 2 or 3 of years I think :-). +to do this we use a region-third-table designation type in +our address space control registers. + + +The Linux for s/390 & z/Architecture Kernel Task Structure +========================================================== +Each process/thread under Linux for S390 has its own kernel task_struct +defined in linux/include/linux/sched.h +The S390 on initialisation & resuming of a process on a cpu sets +the __LC_KERNEL_STACK variable in the spare prefix area for this cpu +( which we use for per processor globals). + +The kernel stack pointer is intimately tied with the task stucture for +each processor as follows. + + s/390 + ************************ + * 1 page kernel stack * + * ( 4K ) * + ************************ + * 1 page task_struct * + * ( 4K ) * +8K aligned ************************ + + z/Architecture + ************************ + * 2 page kernel stack * + * ( 8K ) * + ************************ + * 2 page task_struct * + * ( 8K ) * +16K aligned ************************ + +What this means is that we don't need to dedicate any register or global variable +to point to the current running process & can retrieve it with the following +very simple construct for s/390 & one very similar for z/Architecture. + +static inline struct task_struct * get_current(void) +{ + struct task_struct *current; + __asm__("lhi %0,-8192\n\t" + "nr %0,15" + : "=r" (current) ); + return current; +} + +i.e. just anding the current kernel stack pointer with the mask -8192. +Thankfully because Linux dosen't have support for nested IO interrupts +& our devices have large buffers can survive interrupts being shut for +short amounts of time we don't need a separate stack for interrupts. + + + + +Register Usage & Stackframes on Linux for s/390 & z/Architecture +================================================================= +Overview: +--------- +This is the code that gcc produces at the top & the bottom of +each function, it usually is fairly consistent & similar from +function to function & if you know its layout you can probalby +make some headway in finding the ultimate cause of a problem +after a crash without a source level debugger. + +Note: To follow stackframes requires a knowledge of C or Pascal & +limited knowledge of one assembly language. + +It should be noted that there are some differences between the +s/390 & z/Architecture stack layouts as the z/Architecture stack layout didn't have +to maintain compatibility with older linkage formats. + +Glossary: +--------- +alloca: +This is a built in compiler function for runtime allocation +of extra space on the callers stack which is obviously freed +up on function exit ( e.g. the caller may choose to allocate nothing +of a buffer of 4k if required for temporary purposes ), it generates +very efficient code ( a few cycles ) when compared to alternatives +like malloc. + +automatics: These are local variables on the stack, +i.e they aren't in registers & they aren't static. + +back-chain: +This is a pointer to the stack pointer before entering a +framed functions ( see frameless function ) prologue got by +deferencing the address of the current stack pointer, + i.e. got by accessing the 32 bit value at the stack pointers +current location. + +base-pointer: +This is a pointer to the back of the literal pool which +is an area just behind each procedure used to store constants +in each function. + +call-clobbered: The caller probably needs to save these registers if there +is something of value in them, on the stack or elsewhere before making a +call to another procedure so that it can restore it later. + +epilogue: +The code generated by the compiler to return to the caller. + +frameless-function +A frameless function in Linux for s390 & z/Architecture is one which doesn't +need more than the register save area ( 96 bytes on s/390, 160 on z/Architecture ) +given to it by the caller. +A frameless function never: +1) Sets up a back chain. +2) Calls alloca. +3) Calls other normal functions +4) Has automatics. + +GOT-pointer: +This is a pointer to the global-offset-table in ELF +( Executable Linkable Format, Linux'es most common executable format ), +all globals & shared library objects are found using this pointer. + +lazy-binding +ELF shared libraries are typically only loaded when routines in the shared +library are actually first called at runtime. This is lazy binding. + +procedure-linkage-table +This is a table found from the GOT which contains pointers to routines +in other shared libraries which can't be called to by easier means. + +prologue: +The code generated by the compiler to set up the stack frame. + +outgoing-args: +This is extra area allocated on the stack of the calling function if the +parameters for the callee's cannot all be put in registers, the same +area can be reused by each function the caller calls. + +routine-descriptor: +A COFF executable format based concept of a procedure reference +actually being 8 bytes or more as opposed to a simple pointer to the routine. +This is typically defined as follows +Routine Descriptor offset 0=Pointer to Function +Routine Descriptor offset 4=Pointer to Table of Contents +The table of contents/TOC is roughly equivalent to a GOT pointer. +& it means that shared libraries etc. can be shared between several +environments each with their own TOC. + + +static-chain: This is used in nested functions a concept adopted from pascal +by gcc not used in ansi C or C++ ( although quite useful ), basically it +is a pointer used to reference local variables of enclosing functions. +You might come across this stuff once or twice in your lifetime. + +e.g. +The function below should return 11 though gcc may get upset & toss warnings +about unused variables. +int FunctionA(int a) +{ + int b; + FunctionC(int c) + { + b=c+1; + } + FunctionC(10); + return(b); +} + + +s/390 & z/Architecture Register usage +===================================== +r0 used by syscalls/assembly call-clobbered +r1 used by syscalls/assembly call-clobbered +r2 argument 0 / return value 0 call-clobbered +r3 argument 1 / return value 1 (if long long) call-clobbered +r4 argument 2 call-clobbered +r5 argument 3 call-clobbered +r6 argument 5 saved +r7 pointer-to arguments 5 to ... saved +r8 this & that saved +r9 this & that saved +r10 static-chain ( if nested function ) saved +r11 frame-pointer ( if function used alloca ) saved +r12 got-pointer saved +r13 base-pointer saved +r14 return-address saved +r15 stack-pointer saved + +f0 argument 0 / return value ( float/double ) call-clobbered +f2 argument 1 call-clobbered +f4 z/Architecture argument 2 saved +f6 z/Architecture argument 3 saved +The remaining floating points +f1,f3,f5 f7-f15 are call-clobbered. + +Notes: +------ +1) The only requirement is that registers which are used +by the callee are saved, e.g. the compiler is perfectly +capible of using r11 for purposes other than a frame a +frame pointer if a frame pointer is not needed. +2) In functions with variable arguments e.g. printf the calling procedure +is identical to one without variable arguments & the same number of +parameters. However, the prologue of this function is somewhat more +hairy owing to it having to move these parameters to the stack to +get va_start, va_arg & va_end to work. +3) Access registers are currently unused by gcc but are used in +the kernel. Possibilities exist to use them at the moment for +temporary storage but it isn't recommended. +4) Only 4 of the floating point registers are used for +parameter passing as older machines such as G3 only have only 4 +& it keeps the stack frame compatible with other compilers. +However with IEEE floating point emulation under linux on the +older machines you are free to use the other 12. +5) A long long or double parameter cannot be have the +first 4 bytes in a register & the second four bytes in the +outgoing args area. It must be purely in the outgoing args +area if crossing this boundary. +6) Floating point parameters are mixed with outgoing args +on the outgoing args area in the order the are passed in as parameters. +7) Floating point arguments 2 & 3 are saved in the outgoing args area for +z/Architecture + + +Stack Frame Layout +------------------ +s/390 z/Architecture +0 0 back chain ( a 0 here signifies end of back chain ) +4 8 eos ( end of stack, not used on Linux for S390 used in other linkage formats ) +8 16 glue used in other s/390 linkage formats for saved routine descriptors etc. +12 24 glue used in other s/390 linkage formats for saved routine descriptors etc. +16 32 scratch area +20 40 scratch area +24 48 saved r6 of caller function +28 56 saved r7 of caller function +32 64 saved r8 of caller function +36 72 saved r9 of caller function +40 80 saved r10 of caller function +44 88 saved r11 of caller function +48 96 saved r12 of caller function +52 104 saved r13 of caller function +56 112 saved r14 of caller function +60 120 saved r15 of caller function +64 128 saved f4 of caller function +72 132 saved f6 of caller function +80 undefined +96 160 outgoing args passed from caller to callee +96+x 160+x possible stack alignment ( 8 bytes desirable ) +96+x+y 160+x+y alloca space of caller ( if used ) +96+x+y+z 160+x+y+z automatics of caller ( if used ) +0 back-chain + +A sample program with comments. +=============================== + +Comments on the function test +----------------------------- +1) It didn't need to set up a pointer to the constant pool gpr13 as it isn't used +( :-( ). +2) This is a frameless function & no stack is bought. +3) The compiler was clever enough to recognise that it could return the +value in r2 as well as use it for the passed in parameter ( :-) ). +4) The basr ( branch relative & save ) trick works as follows the instruction +has a special case with r0,r0 with some instruction operands is understood as +the literal value 0, some risc architectures also do this ). So now +we are branching to the next address & the address new program counter is +in r13,so now we subtract the size of the function prologue we have executed ++ the size of the literal pool to get to the top of the literal pool +0040037c int test(int b) +{ # Function prologue below + 40037c: 90 de f0 34 stm %r13,%r14,52(%r15) # Save registers r13 & r14 + 400380: 0d d0 basr %r13,%r0 # Set up pointer to constant pool using + 400382: a7 da ff fa ahi %r13,-6 # basr trick + return(5+b); + # Huge main program + 400386: a7 2a 00 05 ahi %r2,5 # add 5 to r2 + + # Function epilogue below + 40038a: 98 de f0 34 lm %r13,%r14,52(%r15) # restore registers r13 & 14 + 40038e: 07 fe br %r14 # return +} + +Comments on the function main +----------------------------- +1) The compiler did this function optimally ( 8-) ) + +Literal pool for main. +400390: ff ff ff ec .long 0xffffffec +main(int argc,char *argv[]) +{ # Function prologue below + 400394: 90 bf f0 2c stm %r11,%r15,44(%r15) # Save necessary registers + 400398: 18 0f lr %r0,%r15 # copy stack pointer to r0 + 40039a: a7 fa ff a0 ahi %r15,-96 # Make area for callee saving + 40039e: 0d d0 basr %r13,%r0 # Set up r13 to point to + 4003a0: a7 da ff f0 ahi %r13,-16 # literal pool + 4003a4: 50 00 f0 00 st %r0,0(%r15) # Save backchain + + return(test(5)); # Main Program Below + 4003a8: 58 e0 d0 00 l %r14,0(%r13) # load relative address of test from + # literal pool + 4003ac: a7 28 00 05 lhi %r2,5 # Set first parameter to 5 + 4003b0: 4d ee d0 00 bas %r14,0(%r14,%r13) # jump to test setting r14 as return + # address using branch & save instruction. + + # Function Epilogue below + 4003b4: 98 bf f0 8c lm %r11,%r15,140(%r15)# Restore necessary registers. + 4003b8: 07 fe br %r14 # return to do program exit +} + + +Compiler updates +---------------- + +main(int argc,char *argv[]) +{ + 4004fc: 90 7f f0 1c stm %r7,%r15,28(%r15) + 400500: a7 d5 00 04 bras %r13,400508 <main+0xc> + 400504: 00 40 04 f4 .long 0x004004f4 + # compiler now puts constant pool in code to so it saves an instruction + 400508: 18 0f lr %r0,%r15 + 40050a: a7 fa ff a0 ahi %r15,-96 + 40050e: 50 00 f0 00 st %r0,0(%r15) + return(test(5)); + 400512: 58 10 d0 00 l %r1,0(%r13) + 400516: a7 28 00 05 lhi %r2,5 + 40051a: 0d e1 basr %r14,%r1 + # compiler adds 1 extra instruction to epilogue this is done to + # avoid processor pipeline stalls owing to data dependencies on g5 & + # above as register 14 in the old code was needed directly after being loaded + # by the lm %r11,%r15,140(%r15) for the br %14. + 40051c: 58 40 f0 98 l %r4,152(%r15) + 400520: 98 7f f0 7c lm %r7,%r15,124(%r15) + 400524: 07 f4 br %r4 +} + + +Hartmut ( our compiler developer ) also has been threatening to take out the +stack backchain in optimised code as this also causes pipeline stalls, you +have been warned. + +64 bit z/Architecture code disassembly +-------------------------------------- + +If you understand the stuff above you'll understand the stuff +below too so I'll avoid repeating myself & just say that +some of the instructions have g's on the end of them to indicate +they are 64 bit & the stack offsets are a bigger, +the only other difference you'll find between 32 & 64 bit is that +we now use f4 & f6 for floating point arguments on 64 bit. +00000000800005b0 <test>: +int test(int b) +{ + return(5+b); + 800005b0: a7 2a 00 05 ahi %r2,5 + 800005b4: b9 14 00 22 lgfr %r2,%r2 # downcast to integer + 800005b8: 07 fe br %r14 + 800005ba: 07 07 bcr 0,%r7 + + +} + +00000000800005bc <main>: +main(int argc,char *argv[]) +{ + 800005bc: eb bf f0 58 00 24 stmg %r11,%r15,88(%r15) + 800005c2: b9 04 00 1f lgr %r1,%r15 + 800005c6: a7 fb ff 60 aghi %r15,-160 + 800005ca: e3 10 f0 00 00 24 stg %r1,0(%r15) + return(test(5)); + 800005d0: a7 29 00 05 lghi %r2,5 + # brasl allows jumps > 64k & is overkill here bras would do fune + 800005d4: c0 e5 ff ff ff ee brasl %r14,800005b0 <test> + 800005da: e3 40 f1 10 00 04 lg %r4,272(%r15) + 800005e0: eb bf f0 f8 00 04 lmg %r11,%r15,248(%r15) + 800005e6: 07 f4 br %r4 +} + + + +Compiling programs for debugging on Linux for s/390 & z/Architecture +==================================================================== +-gdwarf-2 now works it should be considered the default debugging +format for s/390 & z/Architecture as it is more reliable for debugging +shared libraries, normal -g debugging works much better now +Thanks to the IBM java compiler developers bug reports. + +This is typically done adding/appending the flags -g or -gdwarf-2 to the +CFLAGS & LDFLAGS variables Makefile of the program concerned. + +If using gdb & you would like accurate displays of registers & + stack traces compile without optimisation i.e make sure +that there is no -O2 or similar on the CFLAGS line of the Makefile & +the emitted gcc commands, obviously this will produce worse code +( not advisable for shipment ) but it is an aid to the debugging process. + +This aids debugging because the compiler will copy parameters passed in +in registers onto the stack so backtracing & looking at passed in +parameters will work, however some larger programs which use inline functions +will not compile without optimisation. + +Debugging with optimisation has since much improved after fixing +some bugs, please make sure you are using gdb-5.0 or later developed +after Nov'2000. + +Figuring out gcc compile errors +=============================== +If you are getting a lot of syntax errors compiling a program & the problem +isn't blatantly obvious from the source. +It often helps to just preprocess the file, this is done with the -E +option in gcc. +What this does is that it runs through the very first phase of compilation +( compilation in gcc is done in several stages & gcc calls many programs to +achieve its end result ) with the -E option gcc just calls the gcc preprocessor (cpp). +The c preprocessor does the following, it joins all the files #included together +recursively ( #include files can #include other files ) & also the c file you wish to compile. +It puts a fully qualified path of the #included files in a comment & it +does macro expansion. +This is useful for debugging because +1) You can double check whether the files you expect to be included are the ones +that are being included ( e.g. double check that you aren't going to the i386 asm directory ). +2) Check that macro definitions aren't clashing with typedefs, +3) Check that definitons aren't being used before they are being included. +4) Helps put the line emitting the error under the microscope if it contains macros. + +For convenience the Linux kernel's makefile will do preprocessing automatically for you +by suffixing the file you want built with .i ( instead of .o ) + +e.g. +from the linux directory type +make arch/s390/kernel/signal.i +this will build + +s390-gcc -D__KERNEL__ -I/home1/barrow/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer +-fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -E arch/s390/kernel/signal.c +> arch/s390/kernel/signal.i + +Now look at signal.i you should see something like. + + +# 1 "/home1/barrow/linux/include/asm/types.h" 1 +typedef unsigned short umode_t; +typedef __signed__ char __s8; +typedef unsigned char __u8; +typedef __signed__ short __s16; +typedef unsigned short __u16; + +If instead you are getting errors further down e.g. +unknown instruction:2515 "move.l" or better still unknown instruction:2515 +"Fixme not implemented yet, call Martin" you are probably are attempting to compile some code +meant for another architecture or code that is simply not implemented, with a fixme statement +stuck into the inline assembly code so that the author of the file now knows he has work to do. +To look at the assembly emitted by gcc just before it is about to call gas ( the gnu assembler ) +use the -S option. +Again for your convenience the Linux kernel's Makefile will hold your hand & +do all this donkey work for you also by building the file with the .s suffix. +e.g. +from the Linux directory type +make arch/s390/kernel/signal.s + +s390-gcc -D__KERNEL__ -I/home1/barrow/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer +-fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -S arch/s390/kernel/signal.c +-o arch/s390/kernel/signal.s + + +This will output something like, ( please note the constant pool & the useful comments +in the prologue to give you a hand at interpreting it ). + +.LC54: + .string "misaligned (__u16 *) in __xchg\n" +.LC57: + .string "misaligned (__u32 *) in __xchg\n" +.L$PG1: # Pool sys_sigsuspend +.LC192: + .long -262401 +.LC193: + .long -1 +.LC194: + .long schedule-.L$PG1 +.LC195: + .long do_signal-.L$PG1 + .align 4 +.globl sys_sigsuspend + .type sys_sigsuspend,@function +sys_sigsuspend: +# leaf function 0 +# automatics 16 +# outgoing args 0 +# need frame pointer 0 +# call alloca 0 +# has varargs 0 +# incoming args (stack) 0 +# function length 168 + STM 8,15,32(15) + LR 0,15 + AHI 15,-112 + BASR 13,0 +.L$CO1: AHI 13,.L$PG1-.L$CO1 + ST 0,0(15) + LR 8,2 + N 5,.LC192-.L$PG1(13) + +Adding -g to the above output makes the output even more useful +e.g. typing +make CC:="s390-gcc -g" kernel/sched.s + +which compiles. +s390-gcc -g -D__KERNEL__ -I/home/barrow/linux-2.3/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -S kernel/sched.c -o kernel/sched.s + +also outputs stabs ( debugger ) info, from this info you can find out the +offsets & sizes of various elements in structures. +e.g. the stab for the structure +struct rlimit { + unsigned long rlim_cur; + unsigned long rlim_max; +}; +is +.stabs "rlimit:T(151,2)=s8rlim_cur:(0,5),0,32;rlim_max:(0,5),32,32;;",128,0,0,0 +from this stab you can see that +rlimit_cur starts at bit offset 0 & is 32 bits in size +rlimit_max starts at bit offset 32 & is 32 bits in size. + + +Debugging Tools: +================ + +objdump +======= +This is a tool with many options the most useful being ( if compiled with -g). +objdump --source <victim program or object file> > <victims debug listing > + + +The whole kernel can be compiled like this ( Doing this will make a 17MB kernel +& a 200 MB listing ) however you have to strip it before building the image +using the strip command to make it a more reasonable size to boot it. + +A source/assembly mixed dump of the kernel can be done with the line +objdump --source vmlinux > vmlinux.lst +Also if the file isn't compiled -g this will output as much debugging information +as it can ( e.g. function names ), however, this is very slow as it spends lots +of time searching for debugging info, the following self explanitory line should be used +instead if the code isn't compiled -g. +objdump --disassemble-all --syms vmlinux > vmlinux.lst +as it is much faster + +As hard drive space is valuble most of us use the following approach. +1) Look at the emitted psw on the console to find the crash address in the kernel. +2) Look at the file System.map ( in the linux directory ) produced when building +the kernel to find the closest address less than the current PSW to find the +offending function. +3) use grep or similar to search the source tree looking for the source file + with this function if you don't know where it is. +4) rebuild this object file with -g on, as an example suppose the file was +( /arch/s390/kernel/signal.o ) +5) Assuming the file with the erroneous function is signal.c Move to the base of the +Linux source tree. +6) rm /arch/s390/kernel/signal.o +7) make /arch/s390/kernel/signal.o +8) watch the gcc command line emitted +9) type it in again or alernatively cut & paste it on the console adding the -g option. +10) objdump --source arch/s390/kernel/signal.o > signal.lst +This will output the source & the assembly intermixed, as the snippet below shows +This will unfortunately output addresses which aren't the same +as the kernel ones you should be able to get around the mental arithmetic +by playing with the --adjust-vma parameter to objdump. + + + + +extern inline void spin_lock(spinlock_t *lp) +{ + a0: 18 34 lr %r3,%r4 + a2: a7 3a 03 bc ahi %r3,956 + __asm__ __volatile(" lhi 1,-1\n" + a6: a7 18 ff ff lhi %r1,-1 + aa: 1f 00 slr %r0,%r0 + ac: ba 01 30 00 cs %r0,%r1,0(%r3) + b0: a7 44 ff fd jm aa <sys_sigsuspend+0x2e> + saveset = current->blocked; + b4: d2 07 f0 68 mvc 104(8,%r15),972(%r4) + b8: 43 cc + return (set->sig[0] & mask) != 0; +} + +6) If debugging under VM go down to that section in the document for more info. + + +I now have a tool which takes the pain out of --adjust-vma +& you are able to do something like +make /arch/s390/kernel/traps.lst +& it automatically generates the correctly relocated entries for +the text segment in traps.lst. +This tool is now standard in linux distro's in scripts/makelst + +strace: +------- +Q. What is it ? +A. It is a tool for intercepting calls to the kernel & logging them +to a file & on the screen. + +Q. What use is it ? +A. You can used it to find out what files a particular program opens. + + + +Example 1 +--------- +If you wanted to know does ping work but didn't have the source +strace ping -c 1 127.0.0.1 +& then look at the man pages for each of the syscalls below, +( In fact this is sometimes easier than looking at some spagetti +source which conditionally compiles for several architectures ) +Not everything that it throws out needs to make sense immeadiately + +Just looking quickly you can see that it is making up a RAW socket +for the ICMP protocol. +Doing an alarm(10) for a 10 second timeout +& doing a gettimeofday call before & after each read to see +how long the replies took, & writing some text to stdout so the user +has an idea what is going on. + +socket(PF_INET, SOCK_RAW, IPPROTO_ICMP) = 3 +getuid() = 0 +setuid(0) = 0 +stat("/usr/share/locale/C/libc.cat", 0xbffff134) = -1 ENOENT (No such file or directory) +stat("/usr/share/locale/libc/C", 0xbffff134) = -1 ENOENT (No such file or directory) +stat("/usr/local/share/locale/C/libc.cat", 0xbffff134) = -1 ENOENT (No such file or directory) +getpid() = 353 +setsockopt(3, SOL_SOCKET, SO_BROADCAST, [1], 4) = 0 +setsockopt(3, SOL_SOCKET, SO_RCVBUF, [49152], 4) = 0 +fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(3, 1), ...}) = 0 +mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40008000 +ioctl(1, TCGETS, {B9600 opost isig icanon echo ...}) = 0 +write(1, "PING 127.0.0.1 (127.0.0.1): 56 d"..., 42PING 127.0.0.1 (127.0.0.1): 56 data bytes +) = 42 +sigaction(SIGINT, {0x8049ba0, [], SA_RESTART}, {SIG_DFL}) = 0 +sigaction(SIGALRM, {0x8049600, [], SA_RESTART}, {SIG_DFL}) = 0 +gettimeofday({948904719, 138951}, NULL) = 0 +sendto(3, "\10\0D\201a\1\0\0\17#\2178\307\36"..., 64, 0, {sin_family=AF_INET, +sin_port=htons(0), sin_addr=inet_addr("127.0.0.1")}, 16) = 64 +sigaction(SIGALRM, {0x8049600, [], SA_RESTART}, {0x8049600, [], SA_RESTART}) = 0 +sigaction(SIGALRM, {0x8049ba0, [], SA_RESTART}, {0x8049600, [], SA_RESTART}) = 0 +alarm(10) = 0 +recvfrom(3, "E\0\0T\0005\0\0@\1|r\177\0\0\1\177"..., 192, 0, +{sin_family=AF_INET, sin_port=htons(50882), sin_addr=inet_addr("127.0.0.1")}, [16]) = 84 +gettimeofday({948904719, 160224}, NULL) = 0 +recvfrom(3, "E\0\0T\0006\0\0\377\1\275p\177\0"..., 192, 0, +{sin_family=AF_INET, sin_port=htons(50882), sin_addr=inet_addr("127.0.0.1")}, [16]) = 84 +gettimeofday({948904719, 166952}, NULL) = 0 +write(1, "64 bytes from 127.0.0.1: icmp_se"..., +5764 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=28.0 ms + +Example 2 +--------- +strace passwd 2>&1 | grep open +produces the following output +open("/etc/ld.so.cache", O_RDONLY) = 3 +open("/opt/kde/lib/libc.so.5", O_RDONLY) = -1 ENOENT (No such file or directory) +open("/lib/libc.so.5", O_RDONLY) = 3 +open("/dev", O_RDONLY) = 3 +open("/var/run/utmp", O_RDONLY) = 3 +open("/etc/passwd", O_RDONLY) = 3 +open("/etc/shadow", O_RDONLY) = 3 +open("/etc/login.defs", O_RDONLY) = 4 +open("/dev/tty", O_RDONLY) = 4 + +The 2>&1 is done to redirect stderr to stdout & grep is then filtering this input +through the pipe for each line containing the string open. + + +Example 3 +--------- +Getting sophistocated +telnetd crashes on & I don't know why +Steps +----- +1) Replace the following line in /etc/inetd.conf +telnet stream tcp nowait root /usr/sbin/in.telnetd -h +with +telnet stream tcp nowait root /blah + +2) Create the file /blah with the following contents to start tracing telnetd +#!/bin/bash +/usr/bin/strace -o/t1 -f /usr/sbin/in.telnetd -h +3) chmod 700 /blah to make it executable only to root +4) +killall -HUP inetd +or ps aux | grep inetd +get inetd's process id +& kill -HUP inetd to restart it. + +Important options +----------------- +-o is used to tell strace to output to a file in our case t1 in the root directory +-f is to follow children i.e. +e.g in our case above telnetd will start the login process & subsequently a shell like bash. +You will be able to tell which is which from the process ID's listed on the left hand side +of the strace output. +-p<pid> will tell strace to attach to a running process, yup this can be done provided + it isn't being traced or debugged already & you have enough privileges, +the reason 2 processes cannot trace or debug the same program is that strace +becomes the parent process of the one being debugged & processes ( unlike people ) +can have only one parent. + + +However the file /t1 will get big quite quickly +to test it telnet 127.0.0.1 + +now look at what files in.telnetd execve'd +413 execve("/usr/sbin/in.telnetd", ["/usr/sbin/in.telnetd", "-h"], [/* 17 vars */]) = 0 +414 execve("/bin/login", ["/bin/login", "-h", "localhost", "-p"], [/* 2 vars */]) = 0 + +Whey it worked!. + + +Other hints: +------------ +If the program is not very interactive ( i.e. not much keyboard input ) +& is crashing in one architecture but not in another you can do +an strace of both programs under as identical a scenario as you can +on both architectures outputting to a file then. +do a diff of the two traces using the diff program +i.e. +diff output1 output2 +& maybe you'll be able to see where the call paths differed, this +is possibly near the cause of the crash. + +More info +--------- +Look at man pages for strace & the various syscalls +e.g. man strace, man alarm, man socket. + + +Performance Debugging +===================== +gcc is capible of compiling in profiling code just add the -p option +to the CFLAGS, this obviously affects program size & performance. +This can be used by the gprof gnu profiling tool or the +gcov the gnu code coverage tool ( code coverage is a means of testing +code quality by checking if all the code in an executable in exercised by +a tester ). + + +Using top to find out where processes are sleeping in the kernel +---------------------------------------------------------------- +To do this copy the System.map from the root directory where +the linux kernel was built to the /boot directory on your +linux machine. +Start top +Now type fU<return> +You should see a new field called WCHAN which +tells you where each process is sleeping here is a typical output. + + 6:59pm up 41 min, 1 user, load average: 0.00, 0.00, 0.00 +28 processes: 27 sleeping, 1 running, 0 zombie, 0 stopped +CPU states: 0.0% user, 0.1% system, 0.0% nice, 99.8% idle +Mem: 254900K av, 45976K used, 208924K free, 0K shrd, 28636K buff +Swap: 0K av, 0K used, 0K free 8620K cached + + PID USER PRI NI SIZE RSS SHARE WCHAN STAT LIB %CPU %MEM TIME COMMAND + 750 root 12 0 848 848 700 do_select S 0 0.1 0.3 0:00 in.telnetd + 767 root 16 0 1140 1140 964 R 0 0.1 0.4 0:00 top + 1 root 8 0 212 212 180 do_select S 0 0.0 0.0 0:00 init + 2 root 9 0 0 0 0 down_inte SW 0 0.0 0.0 0:00 kmcheck + +The time command +---------------- +Another related command is the time command which gives you an indication +of where a process is spending the majority of its time. +e.g. +time ping -c 5 nc +outputs +real 0m4.054s +user 0m0.010s +sys 0m0.010s + +Debugging under VM +================== + +Notes +----- +Addresses & values in the VM debugger are always hex never decimal +Address ranges are of the format <HexValue1>-<HexValue2> or <HexValue1>.<HexValue2> +e.g. The address range 0x2000 to 0x3000 can be described described as +2000-3000 or 2000.1000 + +The VM Debugger is case insensitive. + +VM's strengths are usually other debuggers weaknesses you can get at any resource +no matter how sensitive e.g. memory management resources,change address translation +in the PSW. For kernel hacking you will reap dividends if you get good at it. + +The VM Debugger displays operators but not operands, probably because some +of it was written when memory was expensive & the programmer was probably proud that +it fitted into 2k of memory & the programmers & didn't want to shock hardcore VM'ers by +changing the interface :-), also the debugger displays useful information on the same line & +the author of the code probably felt that it was a good idea not to go over +the 80 columns on the screen. + +As some of you are probably in a panic now this isn't as unintuitive as it may seem +as the 390 instructions are easy to decode mentally & you can make a good guess at a lot +of them as all the operands are nibble ( half byte aligned ) & if you have an objdump listing +also it is quite easy to follow, if you don't have an objdump listing keep a copy of +the s/390 Reference Summary & look at between pages 2 & 7 or alternatively the +s/390 principles of operation. +e.g. even I can guess that +0001AFF8' LR 180F CC 0 +is a ( load register ) lr r0,r15 + +Also it is very easy to tell the length of a 390 instruction from the 2 most significant +bits in the instruction ( not that this info is really useful except if you are trying to +make sense of a hexdump of code ). +Here is a table +Bits Instruction Length +------------------------------------------ +00 2 Bytes +01 4 Bytes +10 4 Bytes +11 6 Bytes + + + + +The debugger also displays other useful info on the same line such as the +addresses being operated on destination addresses of branches & condition codes. +e.g. +00019736' AHI A7DAFF0E CC 1 +000198BA' BRC A7840004 -> 000198C2' CC 0 +000198CE' STM 900EF068 >> 0FA95E78 CC 2 + + + +Useful VM debugger commands +--------------------------- + +I suppose I'd better mention this before I start +to list the current active traces do +Q TR +there can be a maximum of 255 of these per set +( more about trace sets later ). +To stop traces issue a +TR END. +To delete a particular breakpoint issue +TR DEL <breakpoint number> + +The PA1 key drops to CP mode so you can issue debugger commands, +Doing alt c (on my 3270 console at least ) clears the screen. +hitting b <enter> comes back to the running operating system +from cp mode ( in our case linux ). +It is typically useful to add shortcuts to your profile.exec file +if you have one ( this is roughly equivalent to autoexec.bat in DOS ). +file here are a few from mine. +/* this gives me command history on issuing f12 */ +set pf12 retrieve +/* this continues */ +set pf8 imm b +/* goes to trace set a */ +set pf1 imm tr goto a +/* goes to trace set b */ +set pf2 imm tr goto b +/* goes to trace set c */ +set pf3 imm tr goto c + + + +Instruction Tracing +------------------- +Setting a simple breakpoint +TR I PSWA <address> +To debug a particular function try +TR I R <function address range> +TR I on its own will single step. +TR I DATA <MNEMONIC> <OPTIONAL RANGE> will trace for particular mnemonics +e.g. +TR I DATA 4D R 0197BC.4000 +will trace for BAS'es ( opcode 4D ) in the range 0197BC.4000 +if you were inclined you could add traces for all branch instructions & +suffix them with the run prefix so you would have a backtrace on screen +when a program crashes. +TR BR <INTO OR FROM> will trace branches into or out of an address. +e.g. +TR BR INTO 0 is often quite useful if a program is getting awkward & deciding +to branch to 0 & crashing as this will stop at the address before in jumps to 0. +TR I R <address range> RUN cmd d g +single steps a range of addresses but stays running & +displays the gprs on each step. + + + +Displaying & modifying Registers +-------------------------------- +D G will display all the gprs +Adding a extra G to all the commands is necessary to access the full 64 bit +content in VM on z/Architecture obviously this isn't required for access registers +as these are still 32 bit. +e.g. DGG instead of DG +D X will display all the control registers +D AR will display all the access registers +D AR4-7 will display access registers 4 to 7 +CPU ALL D G will display the GRPS of all CPUS in the configuration +D PSW will display the current PSW +st PSW 2000 will put the value 2000 into the PSW & +cause crash your machine. +D PREFIX displays the prefix offset + + +Displaying Memory +----------------- +To display memory mapped using the current PSW's mapping try +D <range> +To make VM display a message each time it hits a particular address & continue try +D I<range> will disassemble/display a range of instructions. +ST addr 32 bit word will store a 32 bit aligned address +D T<range> will display the EBCDIC in an address ( if you are that way inclined ) +D R<range> will display real addresses ( without DAT ) but with prefixing. +There are other complex options to display if you need to get at say home space +but are in primary space the easiest thing to do is to temporarily +modify the PSW to the other addressing mode, display the stuff & then +restore it. + + + +Hints +----- +If you want to issue a debugger command without halting your virtual machine with the +PA1 key try prefixing the command with #CP e.g. +#cp tr i pswa 2000 +also suffixing most debugger commands with RUN will cause them not +to stop just display the mnemonic at the current instruction on the console. +If you have several breakpoints you want to put into your program & +you get fed up of cross referencing with System.map +you can do the following trick for several symbols. +grep do_signal System.map +which emits the following among other things +0001f4e0 T do_signal +now you can do + +TR I PSWA 0001f4e0 cmd msg * do_signal +This sends a message to your own console each time do_signal is entered. +( As an aside I wrote a perl script once which automatically generated a REXX +script with breakpoints on every kernel procedure, this isn't a good idea +because there are thousands of these routines & VM can only set 255 breakpoints +at a time so you nearly had to spend as long pruning the file down as you would +entering the msg's by hand ),however, the trick might be useful for a single object file. +On linux'es 3270 emulator x3270 there is a very useful option under the file ment +Save Screens In File this is very good of keeping a copy of traces. + +From CMS help <command name> will give you online help on a particular command. +e.g. +HELP DISPLAY + +Also CP has a file called profile.exec which automatically gets called +on startup of CMS ( like autoexec.bat ), keeping on a DOS analogy session +CP has a feature similar to doskey, it may be useful for you to +use profile.exec to define some keystrokes. +e.g. +SET PF9 IMM B +This does a single step in VM on pressing F8. +SET PF10 ^ +This sets up the ^ key. +which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed directly into some 3270 consoles. +SET PF11 ^- +This types the starting keystrokes for a sysrq see SysRq below. +SET PF12 RETRIEVE +This retrieves command history on pressing F12. + + +Sometimes in VM the display is set up to scroll automatically this +can be very annoying if there are messages you wish to look at +to stop this do +TERM MORE 255 255 +This will nearly stop automatic screen updates, however it will +cause a denial of service if lots of messages go to the 3270 console, +so it would be foolish to use this as the default on a production machine. + + +Tracing particular processes +---------------------------- +The kernel's text segment is intentionally at an address in memory that it will +very seldom collide with text segments of user programs ( thanks Martin ), +this simplifies debugging the kernel. +However it is quite common for user processes to have addresses which collide +this can make debugging a particular process under VM painful under normal +circumstances as the process may change when doing a +TR I R <address range>. +Thankfully after reading VM's online help I figured out how to debug +I particular process. + +Your first problem is to find the STD ( segment table designation ) +of the program you wish to debug. +There are several ways you can do this here are a few +1) objdump --syms <program to be debugged> | grep main +To get the address of main in the program. +tr i pswa <address of main> +Start the program, if VM drops to CP on what looks like the entry +point of the main function this is most likely the process you wish to debug. +Now do a D X13 or D XG13 on z/Architecture. +On 31 bit the STD is bits 1-19 ( the STO segment table origin ) +& 25-31 ( the STL segment table length ) of CR13. +now type +TR I R STD <CR13's value> 0.7fffffff +e.g. +TR I R STD 8F32E1FF 0.7fffffff +Another very useful variation is +TR STORE INTO STD <CR13's value> <address range> +for finding out when a particular variable changes. + +An alternative way of finding the STD of a currently running process +is to do the following, ( this method is more complex but +could be quite convient if you aren't updating the kernel much & +so your kernel structures will stay constant for a reasonable period of +time ). + +grep task /proc/<pid>/status +from this you should see something like +task: 0f160000 ksp: 0f161de8 pt_regs: 0f161f68 +This now gives you a pointer to the task structure. +Now make CC:="s390-gcc -g" kernel/sched.s +To get the task_struct stabinfo. +( task_struct is defined in include/linux/sched.h ). +Now we want to look at +task->active_mm->pgd +on my machine the active_mm in the task structure stab is +active_mm:(4,12),672,32 +its offset is 672/8=84=0x54 +the pgd member in the mm_struct stab is +pgd:(4,6)=*(29,5),96,32 +so its offset is 96/8=12=0xc + +so we'll +hexdump -s 0xf160054 /dev/mem | more +i.e. task_struct+active_mm offset +to look at the active_mm member +f160054 0fee cc60 0019 e334 0000 0000 0000 0011 +hexdump -s 0x0feecc6c /dev/mem | more +i.e. active_mm+pgd offset +feecc6c 0f2c 0000 0000 0001 0000 0001 0000 0010 +we get something like +now do +TR I R STD <pgd|0x7f> 0.7fffffff +i.e. the 0x7f is added because the pgd only +gives the page table origin & we need to set the low bits +to the maximum possible segment table length. +TR I R STD 0f2c007f 0.7fffffff +on z/Architecture you'll probably need to do +TR I R STD <pgd|0x7> 0.ffffffffffffffff +to set the TableType to 0x1 & the Table length to 3. + + + +Tracing Program Exceptions +-------------------------- +If you get a crash which says something like +illegal operation or specification exception followed by a register dump +You can restart linux & trace these using the tr prog <range or value> trace option. + + + +The most common ones you will normally be tracing for is +1=operation exception +2=privileged operation exception +4=protection exception +5=addressing exception +6=specification exception +10=segment translation exception +11=page translation exception + +The full list of these is on page 22 of the current s/390 Reference Summary. +e.g. +tr prog 10 will trace segment translation exceptions. +tr prog on its own will trace all program interruption codes. + +Trace Sets +---------- +On starting VM you are initially in the INITIAL trace set. +You can do a Q TR to verify this. +If you have a complex tracing situation where you wish to wait for instance +till a driver is open before you start tracing IO, but know in your +heart that you are going to have to make several runs through the code till you +have a clue whats going on. + +What you can do is +TR I PSWA <Driver open address> +hit b to continue till breakpoint +reach the breakpoint +now do your +TR GOTO B +TR IO 7c08-7c09 inst int run +or whatever the IO channels you wish to trace are & hit b + +To got back to the initial trace set do +TR GOTO INITIAL +& the TR I PSWA <Driver open address> will be the only active breakpoint again. + + +Tracing linux syscalls under VM +------------------------------- +Syscalls are implemented on Linux for S390 by the Supervisor call instruction (SVC) there 256 +possibilities of these as the instruction is made up of a 0xA opcode & the second byte being +the syscall number. They are traced using the simple command. +TR SVC <Optional value or range> +the syscalls are defined in linux/include/asm-s390/unistd.h +e.g. to trace all file opens just do +TR SVC 5 ( as this is the syscall number of open ) + + +SMP Specific commands +--------------------- +To find out how many cpus you have +Q CPUS displays all the CPU's available to your virtual machine +To find the cpu that the current cpu VM debugger commands are being directed at do +Q CPU to change the current cpu cpu VM debugger commands are being directed at do +CPU <desired cpu no> + +On a SMP guest issue a command to all CPUs try prefixing the command with cpu all. +To issue a command to a particular cpu try cpu <cpu number> e.g. +CPU 01 TR I R 2000.3000 +If you are running on a guest with several cpus & you have a IO related problem +& cannot follow the flow of code but you know it isnt smp related. +from the bash prompt issue +shutdown -h now or halt. +do a Q CPUS to find out how many cpus you have +detach each one of them from cp except cpu 0 +by issuing a +DETACH CPU 01-(number of cpus in configuration) +& boot linux again. +TR SIGP will trace inter processor signal processor instructions. +DEFINE CPU 01-(number in configuration) +will get your guests cpus back. + + +Help for displaying ascii textstrings +------------------------------------- +On the very latest VM Nucleus'es VM can now display ascii +( thanks Neale for the hint ) by doing +D TX<lowaddr>.<len> +e.g. +D TX0.100 + +Alternatively +============= +Under older VM debuggers ( I love EBDIC too ) you can use this little program I wrote which +will convert a command line of hex digits to ascii text which can be compiled under linux & +you can copy the hex digits from your x3270 terminal to your xterm if you are debugging +from a linuxbox. + +This is quite useful when looking at a parameter passed in as a text string +under VM ( unless you are good at decoding ASCII in your head ). + +e.g. consider tracing an open syscall +TR SVC 5 +We have stopped at a breakpoint +000151B0' SVC 0A05 -> 0001909A' CC 0 + +D 20.8 to check the SVC old psw in the prefix area & see was it from userspace +( for the layout of the prefix area consult P18 of the s/390 390 Reference Summary +if you have it available ). +V00000020 070C2000 800151B2 +The problem state bit wasn't set & it's also too early in the boot sequence +for it to be a userspace SVC if it was we would have to temporarily switch the +psw to user space addressing so we could get at the first parameter of the open in +gpr2. +Next do a +D G2 +GPR 2 = 00014CB4 +Now display what gpr2 is pointing to +D 00014CB4.20 +V00014CB4 2F646576 2F636F6E 736F6C65 00001BF5 +V00014CC4 FC00014C B4001001 E0001000 B8070707 +Now copy the text till the first 00 hex ( which is the end of the string +to an xterm & do hex2ascii on it. +hex2ascii 2F646576 2F636F6E 736F6C65 00 +outputs +Decoded Hex:=/ d e v / c o n s o l e 0x00 +We were opening the console device, + +You can compile the code below yourself for practice :-), +/* + * hex2ascii.c + * a useful little tool for converting a hexadecimal command line to ascii + * + * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + * (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation. + */ +#include <stdio.h> + +int main(int argc,char *argv[]) +{ + int cnt1,cnt2,len,toggle=0; + int startcnt=1; + unsigned char c,hex; + + if(argc>1&&(strcmp(argv[1],"-a")==0)) + startcnt=2; + printf("Decoded Hex:="); + for(cnt1=startcnt;cnt1<argc;cnt1++) + { + len=strlen(argv[cnt1]); + for(cnt2=0;cnt2<len;cnt2++) + { + c=argv[cnt1][cnt2]; + if(c>='0'&&c<='9') + c=c-'0'; + if(c>='A'&&c<='F') + c=c-'A'+10; + if(c>='a'&&c<='f') + c=c-'a'+10; + switch(toggle) + { + case 0: + hex=c<<4; + toggle=1; + break; + case 1: + hex+=c; + if(hex<32||hex>127) + { + if(startcnt==1) + printf("0x%02X ",(int)hex); + else + printf("."); + } + else + { + printf("%c",hex); + if(startcnt==1) + printf(" "); + } + toggle=0; + break; + } + } + } + printf("\n"); +} + + + + +Stack tracing under VM +---------------------- +A basic backtrace +----------------- + +Here are the tricks I use 9 out of 10 times it works pretty well, + +When your backchain reaches a dead end +-------------------------------------- +This can happen when an exception happens in the kernel & the kernel is entered twice +if you reach the NULL pointer at the end of the back chain you should be +able to sniff further back if you follow the following tricks. +1) A kernel address should be easy to recognise since it is in +primary space & the problem state bit isn't set & also +The Hi bit of the address is set. +2) Another backchain should also be easy to recognise since it is an +address pointing to another address approximately 100 bytes or 0x70 hex +behind the current stackpointer. + + +Here is some practice. +boot the kernel & hit PA1 at some random time +d g to display the gprs, this should display something like +GPR 0 = 00000001 00156018 0014359C 00000000 +GPR 4 = 00000001 001B8888 000003E0 00000000 +GPR 8 = 00100080 00100084 00000000 000FE000 +GPR 12 = 00010400 8001B2DC 8001B36A 000FFED8 +Note that GPR14 is a return address but as we are real men we are going to +trace the stack. +display 0x40 bytes after the stack pointer. + +V000FFED8 000FFF38 8001B838 80014C8E 000FFF38 +V000FFEE8 00000000 00000000 000003E0 00000000 +V000FFEF8 00100080 00100084 00000000 000FE000 +V000FFF08 00010400 8001B2DC 8001B36A 000FFED8 + + +Ah now look at whats in sp+56 (sp+0x38) this is 8001B36A our saved r14 if +you look above at our stackframe & also agrees with GPR14. + +now backchain +d 000FFF38.40 +we now are taking the contents of SP to get our first backchain. + +V000FFF38 000FFFA0 00000000 00014995 00147094 +V000FFF48 00147090 001470A0 000003E0 00000000 +V000FFF58 00100080 00100084 00000000 001BF1D0 +V000FFF68 00010400 800149BA 80014CA6 000FFF38 + +This displays a 2nd return address of 80014CA6 + +now do d 000FFFA0.40 for our 3rd backchain + +V000FFFA0 04B52002 0001107F 00000000 00000000 +V000FFFB0 00000000 00000000 FF000000 0001107F +V000FFFC0 00000000 00000000 00000000 00000000 +V000FFFD0 00010400 80010802 8001085A 000FFFA0 + + +our 3rd return address is 8001085A + +as the 04B52002 looks suspiciously like rubbish it is fair to assume that the kernel entry routines +for the sake of optimisation dont set up a backchain. + +now look at System.map to see if the addresses make any sense. + +grep -i 0001b3 System.map +outputs among other things +0001b304 T cpu_idle +so 8001B36A +is cpu_idle+0x66 ( quiet the cpu is asleep, don't wake it ) + + +grep -i 00014 System.map +produces among other things +00014a78 T start_kernel +so 0014CA6 is start_kernel+some hex number I can't add in my head. + +grep -i 00108 System.map +this produces +00010800 T _stext +so 8001085A is _stext+0x5a + +Congrats you've done your first backchain. + + + +s/390 & z/Architecture IO Overview +================================== + +I am not going to give a course in 390 IO architecture as this would take me quite a +while & I'm no expert. Instead I'll give a 390 IO architecture summary for Dummies if you have +the s/390 principles of operation available read this instead. If nothing else you may find a few +useful keywords in here & be able to use them on a web search engine like altavista to find +more useful information. + +Unlike other bus architectures modern 390 systems do their IO using mostly +fibre optics & devices such as tapes & disks can be shared between several mainframes, +also S390 can support upto 65536 devices while a high end PC based system might be choking +with around 64. Here is some of the common IO terminology + +Subchannel: +This is the logical number most IO commands use to talk to an IO device there can be upto +0x10000 (65536) of these in a configuration typically there is a few hundred. Under VM +for simplicity they are allocated contiguously, however on the native hardware they are not +they typically stay consistent between boots provided no new hardware is inserted or removed. +Under Linux for 390 we use these as IRQ's & also when issuing an IO command (CLEAR SUBCHANNEL, +HALT SUBCHANNEL,MODIFY SUBCHANNEL,RESUME SUBCHANNEL,START SUBCHANNEL,STORE SUBCHANNEL & +TEST SUBCHANNEL ) we use this as the ID of the device we wish to talk to, the most +important of these instructions are START SUBCHANNEL ( to start IO ), TEST SUBCHANNEL ( to check +whether the IO completed successfully ), & HALT SUBCHANNEL ( to kill IO ), a subchannel +can have up to 8 channel paths to a device this offers redunancy if one is not available. + + +Device Number: +This number remains static & Is closely tied to the hardware, there are 65536 of these +also they are made up of a CHPID ( Channel Path ID, the most significant 8 bits ) +& another lsb 8 bits. These remain static even if more devices are inserted or removed +from the hardware, there is a 1 to 1 mapping between Subchannels & Device Numbers provided +devices arent inserted or removed. + +Channel Control Words: +CCWS are linked lists of instructions initially pointed to by an operation request block (ORB), +which is initially given to Start Subchannel (SSCH) command along with the subchannel number +for the IO subsystem to process while the CPU continues executing normal code. +These come in two flavours, Format 0 ( 24 bit for backward ) +compatibility & Format 1 ( 31 bit ). These are typically used to issue read & write +( & many other instructions ) they consist of a length field & an absolute address field. +For each IO typically get 1 or 2 interrupts one for channel end ( primary status ) when the +channel is idle & the second for device end ( secondary status ) sometimes you get both +concurrently, you check how the IO went on by issuing a TEST SUBCHANNEL at each interrupt, +from which you receive an Interruption response block (IRB). If you get channel & device end +status in the IRB without channel checks etc. your IO probably went okay. If you didn't you +probably need a doctorto examine the IRB & extended status word etc. +If an error occurs more sophistocated control units have a facitity known as +concurrent sense this means that if an error occurs Extended sense information will +be presented in the Extended status word in the IRB if not you have to issue a +subsequent SENSE CCW command after the test subchannel. + + +TPI( Test pending interrupt) can also be used for polled IO but in multitasking multiprocessor +systems it isn't recommended except for checking special cases ( i.e. non looping checks for +pending IO etc. ). + +Store Subchannel & Modify Subchannel can be used to examine & modify operating characteristics +of a subchannel ( e.g. channel paths ). + +Other IO related Terms: +Sysplex: S390's Clustering Technology +QDIO: S390's new high speed IO architecture to support devices such as gigabit ethernet, +this architecture is also designed to be forward compatible with up & coming 64 bit machines. + + +General Concepts + +Input Output Processors (IOP's) are responsible for communicating between +the mainframe CPU's & the channel & relieve the mainframe CPU's from the +burden of communicating with IO devices directly, this allows the CPU's to +concentrate on data processing. + +IOP's can use one or more links ( known as channel paths ) to talk to each +IO device. It first checks for path availability & chooses an available one, +then starts ( & sometimes terminates IO ). +There are two types of channel path ESCON & the Paralell IO interface. + +IO devices are attached to control units, control units provide the +logic to interface the channel paths & channel path IO protocols to +the IO devices, they can be integrated with the devices or housed separately +& often talk to several similar devices ( typical examples would be raid +controllers or a control unit which connects to 1000 3270 terminals ). + + + +---------------------------------------------------------------+ + | +-----+ +-----+ +-----+ +-----+ +----------+ +----------+ | + | | CPU | | CPU | | CPU | | CPU | | Main | | Expanded | | + | | | | | | | | | | Memory | | Storage | | + | +-----+ +-----+ +-----+ +-----+ +----------+ +----------+ | + |---------------------------------------------------------------+ + | IOP | IOP | IOP | + |--------------------------------------------------------------- + | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C | + ---------------------------------------------------------------- + || || + || Bus & Tag Channel Path || ESCON + || ====================== || Channel + || || || || Path + +----------+ +----------+ +----------+ + | | | | | | + | CU | | CU | | CU | + | | | | | | + +----------+ +----------+ +----------+ + | | | | | ++----------+ +----------+ +----------+ +----------+ +----------+ +|I/O Device| |I/O Device| |I/O Device| |I/O Device| |I/O Device| ++----------+ +----------+ +----------+ +----------+ +----------+ + CPU = Central Processing Unit + C = Channel + IOP = IP Processor + CU = Control Unit + +The 390 IO systems come in 2 flavours the current 390 machines support both + +The Older 360 & 370 Interface,sometimes called the paralell I/O interface, +sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers +Interface (OEMI). + +This byte wide paralell channel path/bus has parity & data on the "Bus" cable +& control lines on the "Tag" cable. These can operate in byte multiplex mode for +sharing between several slow devices or burst mode & monopolize the channel for the +whole burst. Upto 256 devices can be addressed on one of these cables. These cables are +about one inch in diameter. The maximum unextended length supported by these cables is +125 Meters but this can be extended up to 2km with a fibre optic channel extended +such as a 3044. The maximum burst speed supported is 4.5 megabytes per second however +some really old processors support only transfer rates of 3.0, 2.0 & 1.0 MB/sec. +One of these paths can be daisy chained to up to 8 control units. + + +ESCON if fibre optic it is also called FICON +Was introduced by IBM in 1990. Has 2 fibre optic cables & uses either leds or lasers +for communication at a signaling rate of upto 200 megabits/sec. As 10bits are transferred +for every 8 bits info this drops to 160 megabits/sec & to 18.6 Megabytes/sec once +control info & CRC are added. ESCON only operates in burst mode. + +ESCONs typical max cable length is 3km for the led version & 20km for the laser version +known as XDF ( extended distance facility ). This can be further extended by using an +ESCON director which triples the above mentioned ranges. Unlike Bus & Tag as ESCON is +serial it uses a packet switching architecture the standard Bus & Tag control protocol +is however present within the packets. Upto 256 devices can be attached to each control +unit that uses one of these interfaces. + +Common 390 Devices include: +Network adapters typically OSA2,3172's,2116's & OSA-E gigabit ethernet adapters, +Consoles 3270 & 3215 ( a teletype emulated under linux for a line mode console ). +DASD's direct access storage devices ( otherwise known as hard disks ). +Tape Drives. +CTC ( Channel to Channel Adapters ), +ESCON or Paralell Cables used as a very high speed serial link +between 2 machines. We use 2 cables under linux to do a bi-directional serial link. + + +Debugging IO on s/390 & z/Architecture under VM +=============================================== + +Now we are ready to go on with IO tracing commands under VM + +A few self explanatory queries: +Q OSA +Q CTC +Q DISK ( This command is CMS specific ) +Q DASD + + + + + + +Q OSA on my machine returns +OSA 7C08 ON OSA 7C08 SUBCHANNEL = 0000 +OSA 7C09 ON OSA 7C09 SUBCHANNEL = 0001 +OSA 7C14 ON OSA 7C14 SUBCHANNEL = 0002 +OSA 7C15 ON OSA 7C15 SUBCHANNEL = 0003 + +If you have a guest with certain priviliges you may be able to see devices +which don't belong to you to avoid this do add the option V. +e.g. +Q V OSA + +Now using the device numbers returned by this command we will +Trace the io starting up on the first device 7c08 & 7c09 +In our simplest case we can trace the +start subchannels +like TR SSCH 7C08-7C09 +or the halt subchannels +or TR HSCH 7C08-7C09 +MSCH's ,STSCH's I think you can guess the rest + +Ingo's favourite trick is tracing all the IO's & CCWS & spooling them into the reader of another +VM guest so he can ftp the logfile back to his own machine.I'll do a small bit of this & give you + a look at the output. + +1) Spool stdout to VM reader +SP PRT TO (another vm guest ) or * for the local vm guest +2) Fill the reader with the trace +TR IO 7c08-7c09 INST INT CCW PRT RUN +3) Start up linux +i 00c +4) Finish the trace +TR END +5) close the reader +C PRT +6) list reader contents +RDRLIST +7) copy it to linux4's minidisk +RECEIVE / LOG TXT A1 ( replace +8) +filel & press F11 to look at it +You should see someting like. + +00020942' SSCH B2334000 0048813C CC 0 SCH 0000 DEV 7C08 + CPA 000FFDF0 PARM 00E2C9C4 KEY 0 FPI C0 LPM 80 + CCW 000FFDF0 E4200100 00487FE8 0000 E4240100 ........ + IDAL 43D8AFE8 + IDAL 0FB76000 +00020B0A' I/O DEV 7C08 -> 000197BC' SCH 0000 PARM 00E2C9C4 +00021628' TSCH B2354000 >> 00488164 CC 0 SCH 0000 DEV 7C08 + CCWA 000FFDF8 DEV STS 0C SCH STS 00 CNT 00EC + KEY 0 FPI C0 CC 0 CTLS 4007 +00022238' STSCH B2344000 >> 00488108 CC 0 SCH 0000 DEV 7C08 + +If you don't like messing up your readed ( because you possibly booted from it ) +you can alternatively spool it to another readers guest. + + +Other common VM device related commands +--------------------------------------------- +These commands are listed only because they have +been of use to me in the past & may be of use to +you too. For more complete info on each of the commands +use type HELP <command> from CMS. +detaching devices +DET <devno range> +ATT <devno range> <guest> +attach a device to guest * for your own guest +READY <devno> cause VM to issue a fake interrupt. + +The VARY command is normally only available to VM administrators. +VARY ON PATH <path> TO <devno range> +VARY OFF PATH <PATH> FROM <devno range> +This is used to switch on or off channel paths to devices. + +Q CHPID <channel path ID> +This displays state of devices using this channel path +D SCHIB <subchannel> +This displays the subchannel information SCHIB block for the device. +this I believe is also only available to administrators. +DEFINE CTC <devno> +defines a virtual CTC channel to channel connection +2 need to be defined on each guest for the CTC driver to use. +COUPLE devno userid remote devno +Joins a local virtual device to a remote virtual device +( commonly used for the CTC driver ). + +Building a VM ramdisk under CMS which linux can use +def vfb-<blocksize> <subchannel> <number blocks> +blocksize is commonly 4096 for linux. +Formatting it +format <subchannel> <driver letter e.g. x> (blksize <blocksize> + +Sharing a disk between multiple guests +LINK userid devno1 devno2 mode password + + + +GDB on S390 +=========== +N.B. if compiling for debugging gdb works better without optimisation +( see Compiling programs for debugging ) + +invocation +---------- +gdb <victim program> <optional corefile> + +Online help +----------- +help: gives help on commands +e.g. +help +help display +Note gdb's online help is very good use it. + + +Assembly +-------- +info registers: displays registers other than floating point. +info all-registers: displays floating points as well. +disassemble: dissassembles +e.g. +disassemble without parameters will disassemble the current function +disassemble $pc $pc+10 + +Viewing & modifying variables +----------------------------- +print or p: displays variable or register +e.g. p/x $sp will display the stack pointer + +display: prints variable or register each time program stops +e.g. +display/x $pc will display the program counter +display argc + +undisplay : undo's display's + +info breakpoints: shows all current breakpoints + +info stack: shows stack back trace ( if this dosent work too well, I'll show you the +stacktrace by hand below ). + +info locals: displays local variables. + +info args: display current procedure arguments. + +set args: will set argc & argv each time the victim program is invoked. + +set <variable>=value +set argc=100 +set $pc=0 + + + +Modifying execution +------------------- +step: steps n lines of sourcecode +step steps 1 line. +step 100 steps 100 lines of code. + +next: like step except this will not step into subroutines + +stepi: steps a single machine code instruction. +e.g. stepi 100 + +nexti: steps a single machine code instruction but will not step into subroutines. + +finish: will run until exit of the current routine + +run: (re)starts a program + +cont: continues a program + +quit: exits gdb. + + +breakpoints +------------ + +break +sets a breakpoint +e.g. + +break main + +break *$pc + +break *0x400618 + +heres a really useful one for large programs +rbr +Set a breakpoint for all functions matching REGEXP +e.g. +rbr 390 +will set a breakpoint with all functions with 390 in their name. + +info breakpoints +lists all breakpoints + +delete: delete breakpoint by number or delete them all +e.g. +delete 1 will delete the first breakpoint +delete will delete them all + +watch: This will set a watchpoint ( usually hardware assisted ), +This will watch a variable till it changes +e.g. +watch cnt, will watch the variable cnt till it changes. +As an aside unfortunately gdb's, architecture independent watchpoint code +is inconsistent & not very good, watchpoints usually work but not always. + +info watchpoints: Display currently active watchpoints + +condition: ( another useful one ) +Specify breakpoint number N to break only if COND is true. +Usage is `condition N COND', where N is an integer and COND is an +expression to be evaluated whenever breakpoint N is reached. + + + +User defined functions/macros +----------------------------- +define: ( Note this is very very useful,simple & powerful ) +usage define <name> <list of commands> end + +examples which you should consider putting into .gdbinit in your home directory +define d +stepi +disassemble $pc $pc+10 +end + +define e +nexti +disassemble $pc $pc+10 +end + + +Other hard to classify stuff +---------------------------- +signal n: +sends the victim program a signal. +e.g. signal 3 will send a SIGQUIT. + +info signals: +what gdb does when the victim receives certain signals. + +list: +e.g. +list lists current function source +list 1,10 list first 10 lines of curret file. +list test.c:1,10 + + +directory: +Adds directories to be searched for source if gdb cannot find the source. +(note it is a bit sensititive about slashes ) +e.g. To add the root of the filesystem to the searchpath do +directory // + + +call <function> +This calls a function in the victim program, this is pretty powerful +e.g. +(gdb) call printf("hello world") +outputs: +$1 = 11 + +You might now be thinking that the line above didn't work, something extra had to be done. +(gdb) call fflush(stdout) +hello world$2 = 0 +As an aside the debugger also calls malloc & free under the hood +to make space for the "hello world" string. + + + +hints +----- +1) command completion works just like bash +( if you are a bad typist like me this really helps ) +e.g. hit br <TAB> & cursor up & down :-). + +2) if you have a debugging problem that takes a few steps to recreate +put the steps into a file called .gdbinit in your current working directory +if you have defined a few extra useful user defined commands put these in +your home directory & they will be read each time gdb is launched. + +A typical .gdbinit file might be. +break main +run +break runtime_exception +cont + + +stack chaining in gdb by hand +----------------------------- +This is done using a the same trick described for VM +p/x (*($sp+56))&0x7fffffff get the first backchain. + +For z/Architecture +Replace 56 with 112 & ignore the &0x7fffffff +in the macros below & do nasty casts to longs like the following +as gdb unfortunately deals with printed arguments as ints which +messes up everything. +i.e. here is a 3rd backchain dereference +p/x *(long *)(***(long ***)$sp+112) + + +this outputs +$5 = 0x528f18 +on my machine. +Now you can use +info symbol (*($sp+56))&0x7fffffff +you might see something like. +rl_getc + 36 in section .text telling you what is located at address 0x528f18 +Now do. +p/x (*(*$sp+56))&0x7fffffff +This outputs +$6 = 0x528ed0 +Now do. +info symbol (*(*$sp+56))&0x7fffffff +rl_read_key + 180 in section .text +now do +p/x (*(**$sp+56))&0x7fffffff +& so on. + +Disassembling instructions without debug info +--------------------------------------------- +gdb typically compains if there is a lack of debugging +symbols in the disassemble command with +"No function contains specified address." to get around +this do +x/<number lines to disassemble>xi <address> +e.g. +x/20xi 0x400730 + + + +Note: Remember gdb has history just like bash you don't need to retype the +whole line just use the up & down arrows. + + + +For more info +------------- +From your linuxbox do +man gdb or info gdb. + +core dumps +---------- +What a core dump ?, +A core dump is a file generated by the kernel ( if allowed ) which contains the registers, +& all active pages of the program which has crashed. +From this file gdb will allow you to look at the registers & stack trace & memory of the +program as if it just crashed on your system, it is usually called core & created in the +current working directory. +This is very useful in that a customer can mail a core dump to a technical support department +& the technical support department can reconstruct what happened. +Provided the have an identical copy of this program with debugging symbols compiled in & +the source base of this build is available. +In short it is far more useful than something like a crash log could ever hope to be. + +In theory all that is missing to restart a core dumped program is a kernel patch which +will do the following. +1) Make a new kernel task structure +2) Reload all the dumped pages back into the kernel's memory management structures. +3) Do the required clock fixups +4) Get all files & network connections for the process back into an identical state ( really difficult ). +5) A few more difficult things I haven't thought of. + + + +Why have I never seen one ?. +Probably because you haven't used the command +ulimit -c unlimited in bash +to allow core dumps, now do +ulimit -a +to verify that the limit was accepted. + +A sample core dump +To create this I'm going to do +ulimit -c unlimited +gdb +to launch gdb (my victim app. ) now be bad & do the following from another +telnet/xterm session to the same machine +ps -aux | grep gdb +kill -SIGSEGV <gdb's pid> +or alternatively use killall -SIGSEGV gdb if you have the killall command. +Now look at the core dump. +./gdb ./gdb core +Displays the following +GNU gdb 4.18 +Copyright 1998 Free Software Foundation, Inc. +GDB is free software, covered by the GNU General Public License, and you are +welcome to change it and/or distribute copies of it under certain conditions. +Type "show copying" to see the conditions. +There is absolutely no warranty for GDB. Type "show warranty" for details. +This GDB was configured as "s390-ibm-linux"... +Core was generated by `./gdb'. +Program terminated with signal 11, Segmentation fault. +Reading symbols from /usr/lib/libncurses.so.4...done. +Reading symbols from /lib/libm.so.6...done. +Reading symbols from /lib/libc.so.6...done. +Reading symbols from /lib/ld-linux.so.2...done. +#0 0x40126d1a in read () from /lib/libc.so.6 +Setting up the environment for debugging gdb. +Breakpoint 1 at 0x4dc6f8: file utils.c, line 471. +Breakpoint 2 at 0x4d87a4: file top.c, line 2609. +(top-gdb) info stack +#0 0x40126d1a in read () from /lib/libc.so.6 +#1 0x528f26 in rl_getc (stream=0x7ffffde8) at input.c:402 +#2 0x528ed0 in rl_read_key () at input.c:381 +#3 0x5167e6 in readline_internal_char () at readline.c:454 +#4 0x5168ee in readline_internal_charloop () at readline.c:507 +#5 0x51692c in readline_internal () at readline.c:521 +#6 0x5164fe in readline (prompt=0x7ffff810 "\177x\177\177x") + at readline.c:349 +#7 0x4d7a8a in command_line_input (prrompt=0x564420 "(gdb) ", repeat=1, + annotation_suffix=0x4d6b44 "prompt") at top.c:2091 +#8 0x4d6cf0 in command_loop () at top.c:1345 +#9 0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635 + + +LDD +=== +This is a program which lists the shared libraries which a library needs, +Note you also get the relocations of the shared library text segments which +help when using objdump --source. +e.g. + ldd ./gdb +outputs +libncurses.so.4 => /usr/lib/libncurses.so.4 (0x40018000) +libm.so.6 => /lib/libm.so.6 (0x4005e000) +libc.so.6 => /lib/libc.so.6 (0x40084000) +/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) + + +Debugging shared libraries +========================== +Most programs use shared libraries, however it can be very painful +when you single step instruction into a function like printf for the +first time & you end up in functions like _dl_runtime_resolve this is +the ld.so doing lazy binding, lazy binding is a concept in ELF where +shared library functions are not loaded into memory unless they are +actually used, great for saving memory but a pain to debug. +To get around this either relink the program -static or exit gdb type +export LD_BIND_NOW=true this will stop lazy binding & restart the gdb'ing +the program in question. + + + +Debugging modules +================= +As modules are dynamically loaded into the kernel their address can be +anywhere to get around this use the -m option with insmod to emit a load +map which can be piped into a file if required. + +The proc file system +==================== +What is it ?. +It is a filesystem created by the kernel with files which are created on demand +by the kernel if read, or can be used to modify kernel parameters, +it is a powerful concept. + +e.g. + +cat /proc/sys/net/ipv4/ip_forward +On my machine outputs +0 +telling me ip_forwarding is not on to switch it on I can do +echo 1 > /proc/sys/net/ipv4/ip_forward +cat it again +cat /proc/sys/net/ipv4/ip_forward +On my machine now outputs +1 +IP forwarding is on. +There is a lot of useful info in here best found by going in & having a look around, +so I'll take you through some entries I consider important. + +All the processes running on the machine have there own entry defined by +/proc/<pid> +So lets have a look at the init process +cd /proc/1 + +cat cmdline +emits +init [2] + +cd /proc/1/fd +This contains numerical entries of all the open files, +some of these you can cat e.g. stdout (2) + +cat /proc/29/maps +on my machine emits + +00400000-00478000 r-xp 00000000 5f:00 4103 /bin/bash +00478000-0047e000 rw-p 00077000 5f:00 4103 /bin/bash +0047e000-00492000 rwxp 00000000 00:00 0 +40000000-40015000 r-xp 00000000 5f:00 14382 /lib/ld-2.1.2.so +40015000-40016000 rw-p 00014000 5f:00 14382 /lib/ld-2.1.2.so +40016000-40017000 rwxp 00000000 00:00 0 +40017000-40018000 rw-p 00000000 00:00 0 +40018000-4001b000 r-xp 00000000 5f:00 14435 /lib/libtermcap.so.2.0.8 +4001b000-4001c000 rw-p 00002000 5f:00 14435 /lib/libtermcap.so.2.0.8 +4001c000-4010d000 r-xp 00000000 5f:00 14387 /lib/libc-2.1.2.so +4010d000-40111000 rw-p 000f0000 5f:00 14387 /lib/libc-2.1.2.so +40111000-40114000 rw-p 00000000 00:00 0 +40114000-4011e000 r-xp 00000000 5f:00 14408 /lib/libnss_files-2.1.2.so +4011e000-4011f000 rw-p 00009000 5f:00 14408 /lib/libnss_files-2.1.2.so +7fffd000-80000000 rwxp ffffe000 00:00 0 + + +Showing us the shared libraries init uses where they are in memory +& memory access permissions for each virtual memory area. + +/proc/1/cwd is a softlink to the current working directory. +/proc/1/root is the root of the filesystem for this process. + +/proc/1/mem is the current running processes memory which you +can read & write to like a file. +strace uses this sometimes as it is a bit faster than the +rather inefficent ptrace interface for peeking at DATA. + + +cat status + +Name: init +State: S (sleeping) +Pid: 1 +PPid: 0 +Uid: 0 0 0 0 +Gid: 0 0 0 0 +Groups: +VmSize: 408 kB +VmLck: 0 kB +VmRSS: 208 kB +VmData: 24 kB +VmStk: 8 kB +VmExe: 368 kB +VmLib: 0 kB +SigPnd: 0000000000000000 +SigBlk: 0000000000000000 +SigIgn: 7fffffffd7f0d8fc +SigCgt: 00000000280b2603 +CapInh: 00000000fffffeff +CapPrm: 00000000ffffffff +CapEff: 00000000fffffeff + +User PSW: 070de000 80414146 +task: 004b6000 tss: 004b62d8 ksp: 004b7ca8 pt_regs: 004b7f68 +User GPRS: +00000400 00000000 0000000b 7ffffa90 +00000000 00000000 00000000 0045d9f4 +0045cafc 7ffffa90 7fffff18 0045cb08 +00010400 804039e8 80403af8 7ffff8b0 +User ACRS: +00000000 00000000 00000000 00000000 +00000001 00000000 00000000 00000000 +00000000 00000000 00000000 00000000 +00000000 00000000 00000000 00000000 +Kernel BackChain CallChain BackChain CallChain + 004b7ca8 8002bd0c 004b7d18 8002b92c + 004b7db8 8005cd50 004b7e38 8005d12a + 004b7f08 80019114 +Showing among other things memory usage & status of some signals & +the processes'es registers from the kernel task_structure +as well as a backchain which may be useful if a process crashes +in the kernel for some unknown reason. + +Some driver debugging techniques +================================ +debug feature +------------- +Some of our drivers now support a "debug feature" in +/proc/s390dbf see s390dbf.txt in the linux/Documentation directory +for more info. +e.g. +to switch on the lcs "debug feature" +echo 5 > /proc/s390dbf/lcs/level +& then after the error occurred. +cat /proc/s390dbf/lcs/sprintf >/logfile +the logfile now contains some information which may help +tech support resolve a problem in the field. + + + +high level debugging network drivers +------------------------------------ +ifconfig is a quite useful command +it gives the current state of network drivers. + +If you suspect your network device driver is dead +one way to check is type +ifconfig <network device> +e.g. tr0 +You should see something like +tr0 Link encap:16/4 Mbps Token Ring (New) HWaddr 00:04:AC:20:8E:48 + inet addr:9.164.185.132 Bcast:9.164.191.255 Mask:255.255.224.0 + UP BROADCAST RUNNING MULTICAST MTU:2000 Metric:1 + RX packets:246134 errors:0 dropped:0 overruns:0 frame:0 + TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:100 + +if the device doesn't say up +try +/etc/rc.d/init.d/network start +( this starts the network stack & hopefully calls ifconfig tr0 up ). +ifconfig looks at the output of /proc/net/dev & presents it in a more presentable form +Now ping the device from a machine in the same subnet. +if the RX packets count & TX packets counts don't increment you probably +have problems. +next +cat /proc/net/arp +Do you see any hardware addresses in the cache if not you may have problems. +Next try +ping -c 5 <broadcast_addr> i.e. the Bcast field above in the output of +ifconfig. Do you see any replies from machines other than the local machine +if not you may have problems. also if the TX packets count in ifconfig +hasn't incremented either you have serious problems in your driver +(e.g. the txbusy field of the network device being stuck on ) +or you may have multiple network devices connected. + + +chandev +------- +There is a new device layer for channel devices, some +drivers e.g. lcs are registered with this layer. +If the device uses the channel device layer you'll be +able to find what interrupts it uses & the current state +of the device. +See the manpage chandev.8 &type cat /proc/chandev for more info. + + + +Starting points for debugging scripting languages etc. +====================================================== + +bash/sh + +bash -x <scriptname> +e.g. bash -x /usr/bin/bashbug +displays the following lines as it executes them. ++ MACHINE=i586 ++ OS=linux-gnu ++ CC=gcc ++ CFLAGS= -DPROGRAM='bash' -DHOSTTYPE='i586' -DOSTYPE='linux-gnu' -DMACHTYPE='i586-pc-linux-gnu' -DSHELL -DHAVE_CONFIG_H -I. -I. -I./lib -O2 -pipe ++ RELEASE=2.01 ++ PATCHLEVEL=1 ++ RELSTATUS=release ++ MACHTYPE=i586-pc-linux-gnu + +perl -d <scriptname> runs the perlscript in a fully intercative debugger +<like gdb>. +Type 'h' in the debugger for help. + +for debugging java type +jdb <filename> another fully interactive gdb style debugger. +& type ? in the debugger for help. + + + +Dumptool & Lcrash ( lkcd ) +========================== +Michael Holzheu & others here at IBM have a fairly mature port of +SGI's lcrash tool which allows one to look at kernel structures in a +running kernel. + +It also complements a tool called dumptool which dumps all the kernel's +memory pages & registers to either a tape or a disk. +This can be used by tech support or an ambitious end user do +post mortem debugging of a machine like gdb core dumps. + +Going into how to use this tool in detail will be explained +in other documentation supplied by IBM with the patches & the +lcrash homepage http://oss.sgi.com/projects/lkcd/ & the lcrash manpage. + +How they work +------------- +Lcrash is a perfectly normal program,however, it requires 2 +additional files, Kerntypes which is built using a patch to the +linux kernel sources in the linux root directory & the System.map. + +Kerntypes is an an objectfile whose sole purpose in life +is to provide stabs debug info to lcrash, to do this +Kerntypes is built from kerntypes.c which just includes the most commonly +referenced header files used when debugging, lcrash can then read the +.stabs section of this file. + +Debugging a live system it uses /dev/mem +alternatively for post mortem debugging it uses the data +collected by dumptool. + + + +SysRq +===== +This is now supported by linux for s/390 & z/Architecture. +To enable it do compile the kernel with +Kernel Hacking -> Magic SysRq Key Enabled +echo "1" > /proc/sys/kernel/sysrq +also type +echo "8" >/proc/sys/kernel/printk +To make printk output go to console. +On 390 all commands are prefixed with +^- +e.g. +^-t will show tasks. +^-? or some unknown command will display help. +The sysrq key reading is very picky ( I have to type the keys in an + xterm session & paste them into the x3270 console ) +& it may be wise to predefine the keys as described in the VM hints above + +This is particularly useful for syncing disks unmounting & rebooting +if the machine gets partially hung. + +Read Documentation/sysrq.txt for more info + +References: +=========== +Enterprise Systems Architecture Reference Summary +Enterprise Systems Architecture Principles of Operation +Hartmut Penners s390 stack frame sheet. +IBM Mainframe Channel Attachment a technology brief from a CISCO webpage +Various bits of man & info pages of Linux. +Linux & GDB source. +Various info & man pages. +CMS Help on tracing commands. +Linux for s/390 Elf Application Binary Interface +Linux for z/Series Elf Application Binary Interface ( Both Highly Recommended ) +z/Architecture Principles of Operation SA22-7832-00 +Enterprise Systems Architecture/390 Reference Summary SA22-7209-01 & the +Enterprise Systems Architecture/390 Principles of Operation SA22-7201-05 + +Special Thanks +============== +Special thanks to Neale Ferguson who maintains a much +prettier HTML version of this page at +http://penguinvm.princeton.edu/notes.html#Debug390 +Bob Grainger Stefan Bader & others for reporting bugs |