summaryrefslogtreecommitdiff
path: root/Documentation/openrisc
diff options
context:
space:
mode:
authorStafford Horne <shorne@gmail.com>2017-10-21 22:39:09 +0900
committerStafford Horne <shorne@gmail.com>2017-10-30 21:37:53 +0900
commite4082de21c5c4f9001b8e44b39b5e72f7ed3b2a7 (patch)
treed63023ddbcc7d203479a553759aa40b186502017 /Documentation/openrisc
parent00aa61d36da1969b139dc10b9b555677ebb03c42 (diff)
Documentation: openrisc: Updates to README
Update the OpenRISC readme to provide some more up-to-date information on how to get started with OpenRISC. This includes: - remove references to southpole who no longer are consulting for OpenRISC (confirmed with Jonas) - suggested QEMU instead of the old or1ksim as QEMU is well supported - include instructions on how to get an FPGA board running Suggested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Stafford Horne <shorne@gmail.com>
Diffstat (limited to 'Documentation/openrisc')
-rw-r--r--Documentation/openrisc/README65
1 files changed, 38 insertions, 27 deletions
diff --git a/Documentation/openrisc/README b/Documentation/openrisc/README
index 072069ab5100..777a893d533d 100644
--- a/Documentation/openrisc/README
+++ b/Documentation/openrisc/README
@@ -7,13 +7,7 @@ target architecture, specifically, is the 32-bit OpenRISC 1000 family (or1k).
For information about OpenRISC processors and ongoing development:
website http://openrisc.io
-
-For more information about Linux on OpenRISC, please contact South Pole AB.
-
- email: info@southpole.se
-
- website: http://southpole.se
- http://southpoleconsulting.com
+ email openrisc@lists.librecores.org
---------------------------------------------------------------------
@@ -24,37 +18,54 @@ In order to build and run Linux for OpenRISC, you'll need at least a basic
toolchain and, perhaps, the architectural simulator. Steps to get these bits
in place are outlined here.
-1) The toolchain can be obtained from openrisc.io. Instructions for building
-a toolchain can be found at:
+1) Toolchain
+
+Toolchain binaries can be obtained from openrisc.io or our github releases page.
+Instructions for building the different toolchains can be found on openrisc.io
+or Stafford's toolchain build and release scripts.
+
+ binaries https://github.com/openrisc/or1k-gcc/releases
+ toolchains https://openrisc.io/software
+ building https://github.com/stffrdhrn/or1k-toolchain-build
-https://github.com/openrisc/tutorials
+2) Building
-2) or1ksim (optional)
+Build the Linux kernel as usual
-or1ksim is the architectural simulator which will allow you to actually run
-your OpenRISC Linux kernel if you don't have an OpenRISC processor at hand.
+ make ARCH=openrisc defconfig
+ make ARCH=openrisc
- git clone https://github.com/openrisc/or1ksim.git
+3) Running on FPGA (optional)
- cd or1ksim
- ./configure --prefix=$OPENRISC_PREFIX
- make
- make install
+The OpenRISC community typically uses FuseSoC to manage building and programming
+an SoC into an FPGA. The below is an example of programming a De0 Nano
+development board with the OpenRISC SoC. During the build FPGA RTL is code
+downloaded from the FuseSoC IP cores repository and built using the FPGA vendor
+tools. Binaries are loaded onto the board with openocd.
-3) Linux kernel
+ git clone https://github.com/olofk/fusesoc
+ cd fusesoc
+ sudo pip install -e .
-Build the kernel as usual
+ fusesoc init
+ fusesoc build de0_nano
+ fusesoc pgm de0_nano
- make ARCH=openrisc defconfig
- make ARCH=openrisc
+ openocd -f interface/altera-usb-blaster.cfg \
+ -f board/or1k_generic.cfg
+
+ telnet localhost 4444
+ > init
+ > halt; load_image vmlinux ; reset
-4) Run in architectural simulator
+4) Running on a Simulator (optional)
-Grab the or1ksim platform configuration file (from the or1ksim source) and
-together with your freshly built vmlinux, run your kernel with the following
-incantation:
+QEMU is a processor emulator which we recommend for simulating the OpenRISC
+platform. Please follow the OpenRISC instructions on the QEMU website to get
+Linux running on QEMU. You can build QEMU yourself, but your Linux distribution
+likely provides binary packages to support OpenRISC.
- sim -f arch/openrisc/or1ksim.cfg vmlinux
+ qemu openrisc https://wiki.qemu.org/Documentation/Platforms/OpenRISC
---------------------------------------------------------------------