docs: hwmon: misc files: convert to ReST format

Convert other files maintained by Guenter to ReST format, in order
to allow them to be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 52 insertions, 3 deletions

diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index b4b671f22453..5b14b49bb6f7 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -2,53 +2,100 @@ Kernel driver jc42
 ==================
 
 Supported chips:
+
   * Analog Devices ADT7408
+
     Datasheets:
+
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
+
   * Atmel AT30TS00, AT30TS002A/B, AT30TSE004A
+
     Datasheets:
+
 	http://www.atmel.com/Images/doc8585.pdf
+
 	http://www.atmel.com/Images/doc8711.pdf
+
 	http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf
+
 	http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf
+
   * IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2,
+
 	TS3001GB2
+
     Datasheets:
+
 	Available from IDT web site
+
   * Maxim MAX6604
+
     Datasheets:
+
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
+
   * Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843
+
     Datasheets:
+
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
+
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
+
 	http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf
+
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
+
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
+
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf
+
   * NXP Semiconductors SE97, SE97B, SE98, SE98A
+
     Datasheets:
+
 	http://www.nxp.com/documents/data_sheet/SE97.pdf
+
 	http://www.nxp.com/documents/data_sheet/SE97B.pdf
+
 	http://www.nxp.com/documents/data_sheet/SE98.pdf
+
 	http://www.nxp.com/documents/data_sheet/SE98A.pdf
+
   * ON Semiconductor CAT34TS02, CAT6095
+
     Datasheet:
+
 	http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
+
 	http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
+
   * ST Microelectronics STTS424, STTS424E02, STTS2002, STTS2004, STTS3000
+
     Datasheets:
+
 	http://www.st.com/web/en/resource/technical/document/datasheet/CD00157556.pdf
+
 	http://www.st.com/web/en/resource/technical/document/datasheet/CD00157558.pdf
+
 	http://www.st.com/web/en/resource/technical/document/datasheet/CD00266638.pdf
+
 	http://www.st.com/web/en/resource/technical/document/datasheet/CD00225278.pdf
+
 	http://www.st.com/web/en/resource/technical/document/datasheet/DM00076709.pdf
+
   * JEDEC JC 42.4 compliant temperature sensor chips
+
     Datasheet:
+
 	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
+
   Common for all chips:
+
     Prefix: 'jc42'
+
     Addresses scanned: I2C 0x18 - 0x1f
 
 Author:
@@ -67,10 +114,10 @@ The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
 Example: the following will load the driver for a generic JC 42.4 compliant
-temperature sensor at address 0x18 on I2C bus #1:
+temperature sensor at address 0x18 on I2C bus #1::
 
-# modprobe jc42
-# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
+	# modprobe jc42
+	# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
 
 A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum,
 and critical temperature can be configured. There are alarms for high, low,
@@ -90,6 +137,7 @@ cannot be changed.
 Sysfs entries
 -------------
 
+======================= ===========================================
 temp1_input		Temperature (RO)
 temp1_min		Minimum temperature (RO or RW)
 temp1_max		Maximum temperature (RO or RW)
@@ -101,3 +149,4 @@ temp1_max_hyst		Maximum hysteresis temperature (RO)
 temp1_min_alarm		Temperature low alarm
 temp1_max_alarm		Temperature high alarm
 temp1_crit_alarm	Temperature critical alarm
+======================= ===========================================