Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Okay this is the big one, I was stalled on the fbdev pull req as I
  stupidly let fbdev guys merge a patch I required to fix a warning with
  some patches I had, they ended up merging the patch from the wrong
  place, but the warning should be fixed.  In future I'll just take the
  patch myself!

  Outside drm:

  There are some snd changes for the HDMI audio interactions on haswell,
  they've been acked for inclusion via my tree.  This relies on the
  wound/wait tree from Ingo which is already merged.

  Major changes:

  AMD finally released the dynamic power management code for all their
  GPUs from r600->present day, this is great, off by default for now but
  also a huge amount of code, in fact it is most of this pull request.

  Since it landed there has been a lot of community testing and Alex has
  sent a lot of fixes for any bugs found so far.  I suspect radeon might
  now be the biggest kernel driver ever :-P p.s.  radeon.dpm=1 to enable
  dynamic powermanagement for anyone.

  New drivers:

  Renesas r-car display unit.

  Other highlights:

   - core: GEM CMA prime support, use new w/w mutexs for TTM
     reservations, cursor hotspot, doc updates
   - dvo chips: chrontel 7010B support
   - i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell),
     Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp
     support (this time for sure)
   - nouveau: async buffer object deletion, context/register init
     updates, kernel vp2 engine support, GF117 support, GK110 accel
     support (with external nvidia ucode), context cleanups.
   - exynos: memory leak fixes, Add S3C64XX SoC series support, device
     tree updates, common clock framework support,
   - qxl: cursor hotspot support, multi-monitor support, suspend/resume
     support
   - mgag200: hw cursor support, g200 mode limiting
   - shmobile: prime support
   - tegra: fixes mostly

  I've been banging on this quite a lot due to the size of it, and it
  seems to okay on everything I've tested it on."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits)
  drm/radeon/dpm: implement vblank_too_short callback for si
  drm/radeon/dpm: implement vblank_too_short callback for cayman
  drm/radeon/dpm: implement vblank_too_short callback for btc
  drm/radeon/dpm: implement vblank_too_short callback for evergreen
  drm/radeon/dpm: implement vblank_too_short callback for 7xx
  drm/radeon/dpm: add checks against vblank time
  drm/radeon/dpm: add helper to calculate vblank time
  drm/radeon: remove stray line in old pm code
  drm/radeon/dpm: fix display_gap programming on rv7xx
  drm/nvc0/gr: fix gpc firmware regression
  drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
  drm/radeon/dpm: implement force performance level for TN
  drm/radeon/dpm: implement force performance level for ON/LN
  drm/radeon/dpm: implement force performance level for SI
  drm/radeon/dpm: implement force performance level for cayman
  drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
  drm/radeon/dpm: add infrastructure to force performance levels
  drm/radeon: fix surface setup on r1xx
  drm/radeon: add support for 3d perf states on older asics
  drm/radeon: set default clocks for SI when DPM is disabled
  ...

6 files changed, 33 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt
index e5f130159ae1..fff10da5e927 100644
--- a/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt
@@ -10,6 +10,14 @@ Recommended properties:
    services interrupts for this device.
  - ti,hwmods: Name of the hwmod associated to the LCDC
 
+Optional properties:
+ - max-bandwidth: The maximum pixels per second that the memory
+   interface / lcd controller combination can sustain
+ - max-width: The maximum horizontal pixel width supported by
+   the lcd controller.
+ - max-pixelclock: The maximum pixel clock that can be supported
+   by the lcd controller in KHz.
+
 Example:
 
 	fb: fb@4830e000 {
diff --git a/Documentation/devicetree/bindings/video/display-timing.txt b/Documentation/devicetree/bindings/video/display-timing.txt
index 150038552bc3..e1d4a0b59612 100644
--- a/Documentation/devicetree/bindings/video/display-timing.txt
+++ b/Documentation/devicetree/bindings/video/display-timing.txt
@@ -34,6 +34,7 @@ optional properties:
 			- ignored     = ignored
  - interlaced (bool): boolean to enable interlaced mode
  - doublescan (bool): boolean to enable doublescan mode
+ - doubleclk (bool): boolean to enable doubleclock mode
 
 All the optional properties that are not bool follow the following logic:
     <1>: high active
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
index 589edee37394..323983be3c30 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
@@ -1,22 +1,23 @@
 Device-Tree bindings for drm hdmi driver
 
 Required properties:
-- compatible: value should be "samsung,exynos5-hdmi".
+- compatible: value should be one among the following:
+	1) "samsung,exynos5-hdmi" <DEPRECATED>
+	2) "samsung,exynos4210-hdmi"
+	3) "samsung,exynos4212-hdmi"
 - reg: physical base address of the hdmi and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
 - hpd-gpio: following information about the hotplug gpio pin.
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
-	c) pin function mode.
-	d) optional flags and pull up/down.
-	e) drive strength.
+	c) optional flags and pull up/down.
 
 Example:
 
 	hdmi {
-		compatible = "samsung,exynos5-hdmi";
+		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x100000>;
 		interrupts = <0 95 0>;
-		hpd-gpio = <&gpx3 7 0xf 1 3>;
+		hpd-gpio = <&gpx3 7 1>;
 	};
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt
index fa166d945809..41eee971562b 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt
@@ -1,12 +1,15 @@
 Device-Tree bindings for hdmiddc driver
 
 Required properties:
-- compatible: value should be "samsung,exynos5-hdmiddc".
+- compatible: value should be one of the following
+	1) "samsung,exynos5-hdmiddc" <DEPRECATED>
+	2) "samsung,exynos4210-hdmiddc"
+
 - reg: I2C address of the hdmiddc device.
 
 Example:
 
 	hdmiddc {
-		compatible = "samsung,exynos5-hdmiddc";
+		compatible = "samsung,exynos4210-hdmiddc";
 		reg = <0x50>;
 	};
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
index 858f4f9b902f..162f641f7639 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
@@ -1,12 +1,15 @@
 Device-Tree bindings for hdmiphy driver
 
 Required properties:
-- compatible: value should be "samsung,exynos5-hdmiphy".
+- compatible: value should be one of the following:
+	1) "samsung,exynos5-hdmiphy" <DEPRECATED>
+	2) "samsung,exynos4210-hdmiphy".
+	3) "samsung,exynos4212-hdmiphy".
 - reg: I2C address of the hdmiphy device.
 
 Example:
 
 	hdmiphy {
-		compatible = "samsung,exynos5-hdmiphy";
+		compatible = "samsung,exynos4210-hdmiphy";
 		reg = <0x38>;
 	};
diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
index 9b2ea0343566..3334b0a8e343 100644
--- a/Documentation/devicetree/bindings/video/exynos_mixer.txt
+++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt
@@ -1,7 +1,12 @@
 Device-Tree bindings for mixer driver
 
 Required properties:
-- compatible: value should be "samsung,exynos5-mixer".
+- compatible: value should be one of the following:
+	1) "samsung,exynos5-mixer" <DEPRECATED>
+	2) "samsung,exynos4210-mixer"
+	3) "samsung,exynos5250-mixer"
+	4) "samsung,exynos5420-mixer"
+
 - reg: physical base address of the mixer and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
@@ -9,7 +14,7 @@ Required properties:
 Example:
 
 	mixer {
-		compatible = "samsung,exynos5-mixer";
+		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
 	};