Merge tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - new CEC pin injection code for testing purposes

 - DVB frontend cxd2099 promoted from staging

 - new platform driver for Sony cxd2880 DVB devices

 - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x,
   tw9910.c

 - removal of unused cx18 and ivtv alsa mixers

 - the reneseas-ceu driver doesn't depend on soc_camera anymore and
   moved from staging

 - removed the mantis_vp3028 driver, unused since 2009

 - s5p-mfc: add support for version 10 of the MSP

 - added a decoder for imon protocol

 - atomisp: lots of cleanups

 - imx074 and mt9t031: don't depend on soc_camera anymore, being
   promoted from staging

 - added helper functions to better support DVB I2C binding

 - lots of driver improvements and cleanups

* tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits)
  media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd)
  media: fimc-capture: get rid of two warnings
  media: dvb-usb-v2: fix a missing dependency of I2C_MUX
  media: uvc: to the right check at uvc_ioctl_enum_framesizes()
  media: cec-core: fix a bug at cec_error_inj_write()
  media: tda9840: cleanup a warning
  media: tm6000:  avoid casting just to print pointer address
  media: em28xx-input: improve error handling code
  media: zr364xx: avoid casting just to print pointer address
  media: vivid-radio-rx: add a cast to avoid a warning
  media: saa7134-alsa: don't use casts to print a buffer address
  media: solo6x10: get rid of an address space warning
  media: zoran: don't cast pointers to print them
  media: ir-kbd-i2c: change the if logic to avoid a warning
  media: ir-kbd-i2c: improve error handling code
  media: saa7134-input: improve error handling
  media: s2255drv: fix a casting warning
  media: ivtvfb: Cleanup some warnings
  media: videobuf-dma-sg: Fix a weird cast
  soc_camera: fix a weird cast on printk
  ...

12 files changed, 430 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/media/coda.txt b/Documentation/devicetree/bindings/media/coda.txt
index 2865d04e4030..90eb74cc1993 100644
--- a/Documentation/devicetree/bindings/media/coda.txt
+++ b/Documentation/devicetree/bindings/media/coda.txt
@@ -7,8 +7,9 @@ called VPU (Video Processing Unit).
 Required properties:
 - compatible : should be "fsl,<chip>-src" for i.MX SoCs:
   (a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27
-  (b) "fsl,imx53-vpu" for CODA7541 present in i.MX53
-  (c) "fsl,imx6q-vpu" for CODA960 present in i.MX6q
+  (b) "fsl,imx51-vpu" for CodaHx4 present in i.MX51
+  (c) "fsl,imx53-vpu" for CODA7541 present in i.MX53
+  (d) "fsl,imx6q-vpu" for CODA960 present in i.MX6q
 - reg: should be register base and length as documented in the
   SoC reference manual
 - interrupts : Should contain the VPU interrupt. For CODA960,
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 9cbd92eb5d05..dcf57e7c60eb 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -13,7 +13,11 @@ Required Properties:
     - "adi,adv7611" for the ADV7611
     - "adi,adv7612" for the ADV7612
 
-  - reg: I2C slave address
+  - reg: I2C slave addresses
+    The ADV76xx has up to thirteen 256-byte maps that can be accessed via the
+    main I2C ports. Each map has it own I2C address and acts as a standard
+    slave device on the I2C bus. The main address is mandatory, others are
+    optional and revert to defaults if not specified.
 
   - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
     detection pins, one per HDMI input. The active flag indicates the GPIO
@@ -35,6 +39,11 @@ Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the device's reset pin.
   - default-input: Select which input is selected after reset.
+  - reg-names : Names of maps with programmable addresses.
+		It can contain any map needing a non-default address.
+		Possible maps names are :
+		  "main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe",
+		  "rep", "edid", "hdmi", "test", "cp", "vdp"
 
 Optional Endpoint Properties:
 
@@ -52,7 +61,12 @@ Example:
 
 	hdmi_receiver@4c {
 		compatible = "adi,adv7611";
-		reg = <0x4c>;
+		/*
+		 * The edid page will be accessible @ 0x66 on the I2C bus. All
+		 * other maps will retain their default addresses.
+		 */
+		reg = <0x4c>, <0x66>;
+		reg-names "main", "edid";
 
 		reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
 		hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt
new file mode 100644
index 000000000000..625c4a8c0d53
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov2685.txt
@@ -0,0 +1,41 @@
+* Omnivision OV2685 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: shall be "ovti,ov2685"
+- clocks: reference to the xvclk input clock
+- clock-names: shall be "xvclk"
+- avdd-supply: Analog voltage supply, 2.8 volts
+- dovdd-supply: Digital I/O voltage supply, 1.8 volts
+- dvdd-supply: Digital core voltage supply, 1.8 volts
+- reset-gpios: Low active reset gpio
+
+The device node shall contain one 'port' child node with an
+'endpoint' subnode for its digital output video port,
+in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+The endpoint optional property 'data-lanes' shall be "<1>".
+
+Example:
+&i2c7 {
+	ov2685: camera-sensor@3c {
+		compatible = "ovti,ov2685";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clk_24m_cam>;
+
+		clocks = <&cru SCLK_TESTCLKOUT1>;
+		clock-names = "xvclk";
+
+		avdd-supply = <&pp2800_cam>;
+		dovdd-supply = <&pp1800>;
+		dvdd-supply = <&pp1800>;
+		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+
+		port {
+			ucam_out: endpoint {
+				remote-endpoint = <&mipi_in_ucam>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5695.txt b/Documentation/devicetree/bindings/media/i2c/ov5695.txt
new file mode 100644
index 000000000000..640a63717d96
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5695.txt
@@ -0,0 +1,41 @@
+* Omnivision OV5695 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: shall be "ovti,ov5695"
+- clocks: reference to the xvclk input clock
+- clock-names: shall be "xvclk"
+- avdd-supply: Analog voltage supply, 2.8 volts
+- dovdd-supply: Digital I/O voltage supply, 1.8 volts
+- dvdd-supply: Digital core voltage supply, 1.2 volts
+- reset-gpios: Low active reset gpio
+
+The device node shall contain one 'port' child node with an
+'endpoint' subnode for its digital output video port,
+in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+The endpoint optional property 'data-lanes' shall be "<1 2>".
+
+Example:
+&i2c7 {
+	ov5695: camera-sensor@36 {
+		compatible = "ovti,ov5695";
+		reg = <0x36>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clk_24m_cam>;
+
+		clocks = <&cru SCLK_TESTCLKOUT1>;
+		clock-names = "xvclk";
+
+		avdd-supply = <&pp2800_cam>;
+		dovdd-supply = <&pp1800>;
+		dvdd-supply = <&pp1250_cam>;
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+		port {
+			wcam_out: endpoint {
+				remote-endpoint = <&mipi_in_wcam>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
index 826b6563b009..2c972a56f3cb 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov7670.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
@@ -9,14 +9,21 @@ Required Properties:
 - clocks: reference to the xclk input clock.
 - clock-names: should be "xclk".
 
+Required Endpoint Properties:
+- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+
 Optional Properties:
 - reset-gpios: reference to the GPIO connected to the resetb pin, if any.
   Active is low.
 - powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
   Active is high.
+- ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output
+  signal during horizontal blankings.
 
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
 Documentation/devicetree/bindings/media/video-interfaces.txt.
 
 Example:
@@ -34,8 +41,13 @@ Example:
 			assigned-clocks = <&pck0>;
 			assigned-clock-rates = <25000000>;
 
+			ov7670,pclk-hb-disable;
+
 			port {
 				ov7670_0: endpoint {
+					hsync-active = <0>;
+					vsync-active = <0>;
+
 					remote-endpoint = <&isi_0>;
 				};
 			};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov9650.txt b/Documentation/devicetree/bindings/media/i2c/ov9650.txt
new file mode 100644
index 000000000000..506dfc52872a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov9650.txt
@@ -0,0 +1,36 @@
+* Omnivision OV9650/OV9652 CMOS sensor
+
+Required Properties:
+- compatible: shall be one of
+	"ovti,ov9650"
+	"ovti,ov9652"
+- clocks: reference to the xvclk input clock.
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
+  Active is high.
+- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
+  Active is high.
+
+The device node shall contain one 'port' child node with one child 'endpoint'
+subnode for its digital output video port, in accordance with the video
+interface bindings defined in Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+&i2c0 {
+	ov9650: camera@30 {
+		compatible = "ovti,ov9650";
+		reg = <0x30>;
+		reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_HIGH>;
+		clocks = <&xclk>;
+
+		port {
+			ov9650_0: endpoint {
+				remote-endpoint = <&vcap1_in0>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/tda1997x.txt b/Documentation/devicetree/bindings/media/i2c/tda1997x.txt
new file mode 100644
index 000000000000..e76167999d76
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tda1997x.txt
@@ -0,0 +1,178 @@
+Device-Tree bindings for the NXP TDA1997x HDMI receiver
+
+The TDA19971/73 are HDMI video receivers.
+
+The TDA19971 Video port output pins can be used as follows:
+ - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4]
+ - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4]
+ - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4]
+ - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2]
+ - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0]
+ - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles)
+ - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles)
+ - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
+
+The TDA19973 Video port output pins can be used as follows:
+ - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0]
+ - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0]
+ - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0]
+ - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
+
+The Video port output pins are mapped via 4-bit 'pin groups' allowing
+for a variety of connection possibilities including swapping pin order within
+pin groups. The video_portcfg device-tree property consists of register mapping
+pairs which map a chip-specific VP output register to a 4-bit pin group. If
+the pin group needs to be bit-swapped you can use the *_S pin-group defines.
+
+Required Properties:
+ - compatible          :
+  - "nxp,tda19971" for the TDA19971
+  - "nxp,tda19973" for the TDA19973
+ - reg                 : I2C slave address
+ - interrupts          : The interrupt number
+ - DOVDD-supply        : Digital I/O supply
+ - DVDD-supply         : Digital Core supply
+ - AVDD-supply         : Analog supply
+ - nxp,vidout-portcfg  : array of pairs mapping VP output pins to pin groups.
+
+Optional Properties:
+ - nxp,audout-format   : DAI bus format: "i2s" or "spdif".
+ - nxp,audout-width    : width of audio output data bus (1-4).
+ - nxp,audout-layout   : data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used).
+ - nxp,audout-mclk-fs  : Multiplication factor between stream rate and codec
+                         mclk.
+
+The port node shall contain one endpoint child node for its digital
+output video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Optional Endpoint Properties:
+  The following three properties are defined in video-interfaces.txt and
+  are valid for the output parallel bus endpoint:
+  - hsync-active: Horizontal synchronization polarity. Defaults to active high.
+  - vsync-active: Vertical synchronization polarity. Defaults to active high.
+  - data-active: Data polarity. Defaults to active high.
+
+Examples:
+ - VP[15:0] connected to IMX6 CSI_DATA[19:4] for 16bit YUV422
+   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
+	hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p8v>;
+		/* audio */
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same pixclk cycle.
+		 */
+		nxp,vidout-portcfg =
+			/* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+ - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656
+   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
+	hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p8v>;
+		/* audio */
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same pixclk cycle.
+		 */
+		nxp,vidout-portcfg =
+			/* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+ - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656
+   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
+	hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p8v>;
+		/* audio */
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp BT656 mode outputs YCbCr[11:4] across 8bits over
+		 * 2 pixclk cycles.
+		 */
+		nxp,vidout-portcfg =
+			/* YCbCr[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
+			< TDA1997X_VP24_V15_12 TDA1997X_R_CR_CBCR_11_8 >,
+			/* YCbCr[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
+			< TDA1997X_VP24_V11_08 TDA1997X_R_CR_CBCR_7_4 >,
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 19357d0bbe65..1ce7ff9449c5 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -56,7 +56,7 @@ Board setup example (vin1 composite video input)
 ------------------------------------------------
 
 &i2c2   {
-        status = "ok";
+        status = "okay";
         pinctrl-0 = <&i2c2_pins>;
         pinctrl-names = "default";
 
@@ -79,7 +79,7 @@ Board setup example (vin1 composite video input)
         pinctrl-0 = <&vin1_pins>;
         pinctrl-names = "default";
 
-        status = "ok";
+        status = "okay";
 
         port {
                 #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt b/Documentation/devicetree/bindings/media/renesas,ceu.txt
new file mode 100644
index 000000000000..3fc66dfb192c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.txt
@@ -0,0 +1,81 @@
+Renesas Capture Engine Unit (CEU)
+----------------------------------------------
+
+The Capture Engine Unit is the image capture interface found in the Renesas
+SH Mobile and RZ SoCs.
+
+The interface supports a single parallel input with data bus width of 8 or 16
+bits.
+
+Required properties:
+- compatible: Shall be "renesas,r7s72100-ceu" for CEU units found in RZ/A1H
+  and RZ/A1M SoCs.
+- reg: Registers address base and size.
+- interrupts: The interrupt specifier.
+
+The CEU supports a single parallel input and should contain a single 'port'
+subnode with a single 'endpoint'. Connection to input devices are modeled
+according to the video interfaces OF bindings specified in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Optional endpoint properties applicable to parallel input bus described in
+the above mentioned "video-interfaces.txt" file are supported.
+
+- hsync-active: Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+  If property is not present, default is active high.
+- vsync-active: Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+  If property is not present, default is active high.
+
+Example:
+
+The example describes the connection between the Capture Engine Unit and an
+OV7670 image sensor connected to i2c1 interface.
+
+ceu: ceu@e8210000 {
+	reg = <0xe8210000 0x209c>;
+	compatible = "renesas,r7s72100-ceu";
+	interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&vio_pins>;
+
+	status = "okay";
+
+	port {
+		ceu_in: endpoint {
+			remote-endpoint = <&ov7670_out>;
+
+			hsync-active = <1>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+i2c1: i2c@fcfee400 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ov7670: camera@21 {
+		compatible = "ovti,ov7670";
+		reg = <0x21>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vio_pins>;
+
+		reset-gpios = <&port3 11 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&port3 12 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov7670_out: endpoint {
+				remote-endpoint = <&ceu_in>;
+
+				hsync-active = <1>;
+				vsync-active = <0>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index d3404b5d4d17..aa54c8159d9f 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -13,6 +13,7 @@ Required properties:
 	(c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
 	(d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
 	(e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
+	(f) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
 
   - reg : Physical base address of the IP registers and length of memory
 	  mapped region.
diff --git a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
new file mode 100644
index 000000000000..fc5aa263abe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
@@ -0,0 +1,14 @@
+Sony CXD2880 DVB-T2/T tuner + demodulator driver SPI adapter
+
+Required properties:
+- compatible: Should be "sony,cxd2880".
+- reg: SPI chip select number for the device.
+- spi-max-frequency: Maximum bus speed, should be set to <55000000> (55MHz).
+
+Example:
+
+cxd2880@0 {
+	compatible = "sony,cxd2880";
+	reg = <0>; /* CE0 */
+	spi-max-frequency = <55000000>; /* 55MHz */
+};
diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt
index 91648c569b1e..278098987edb 100644
--- a/Documentation/devicetree/bindings/media/sunxi-ir.txt
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -11,6 +11,8 @@ Required properties:
 Optional properties:
 - linux,rc-map-name: see rc.txt file in the same directory.
 - resets : phandle + reset specifier pair
+- clock-frequency  : IR Receiver clock frequency, in Hertz. Defaults to 8 MHz
+		     if missing.
 
 Example:
 
@@ -18,6 +20,7 @@ ir0: ir@1c21800 {
 	compatible = "allwinner,sun4i-a10-ir";
 	clocks = <&apb0_gates 6>, <&ir0_clk>;
 	clock-names = "apb", "ir";
+	clock-frequency = <3000000>;
 	resets = <&apb0_rst 1>;
 	interrupts = <0 5 1>;
 	reg = <0x01C21800 0x40>;