Merge tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.17 kernel cycle:

  New drivers:

   - Nintendo Wii GameCube GPIO, known as "Hollywood"

   - Raspberry Pi mailbox service GPIO expander

   - Spreadtrum main SC9860 SoC and IEC GPIO controllers.

  Improvements:

   - Implemented .get_multiple() callback for most of the
     high-performance industrial GPIO cards for the ISA bus.

   - ISA GPIO drivers now select the ISA_BUS_API instead of depending on
     it. This is merged with the same pattern for all the ISA drivers
     and some other Kconfig cleanups related to this.

  Cleanup:

   - Delete the TZ1090 GPIO drivers following the deletion of this SoC
     from the ARM tree.

   - Move the documentation over to driver-api to conform with the rest
     of the kernel documentation build.

   - Continue to make the GPIO drivers include only
     <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we
     want to get rid of.

   - Managed to remove VLA allocation from two drivers pending more
     fixes in this area for the next merge window.

   - Misc janitorial fixes"

* tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: Add Spreadtrum PMIC EIC driver support
  gpio: Add Spreadtrum EIC driver support
  dt-bindings: gpio: Add Spreadtrum EIC controller documentation
  gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe()
  pinctrl: qcom: Don't allow protected pins to be requested
  gpiolib: Support 'gpio-reserved-ranges' property
  gpiolib: Change bitmap allocation to kmalloc_array
  gpiolib: Extract mask allocation into subroutine
  dt-bindings: gpio: Add a gpio-reserved-ranges property
  gpio: mockup: fix a potential crash when creating debugfs entries
  gpio: pca953x: add compatibility for pcal6524 and pcal9555a
  gpio: dwapb: Add support for a bus clock
  gpio: Remove VLA from xra1403 driver
  gpio: Remove VLA from MAX3191X driver
  gpio: ws16c48: Implement get_multiple callback
  gpio: gpio-mm: Implement get_multiple callback
  gpio: 104-idi-48: Implement get_multiple callback
  gpio: 104-dio-48e: Implement get_multiple callback
  gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
  gpio: pci-idio-16: Implement get_multiple callback
  ...

9 files changed, 189 insertions, 144 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
new file mode 100644
index 000000000000..93d98d09d92b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
@@ -0,0 +1,97 @@
+Spreadtrum EIC controller bindings
+
+The EIC is the abbreviation of external interrupt controller, which can
+be used only in input mode. The Spreadtrum platform has 2 EIC controllers,
+one is in digital chip, and another one is in PMIC. The digital chip EIC
+controller contains 4 sub-modules: EIC-debounce, EIC-latch, EIC-async and
+EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub-
+module.
+
+The EIC-debounce sub-module provides up to 8 source input signal
+connections. A debounce mechanism is used to capture the input signals'
+stable status (millisecond resolution) and a single-trigger mechanism
+is introduced into this sub-module to enhance the input event detection
+reliability. In addition, this sub-module's clock can be shut off
+automatically to reduce power dissipation. Moreover the debounce range
+is from 1ms to 4s with a step size of 1ms. The input signal will be
+ignored if it is asserted for less than 1 ms.
+
+The EIC-latch sub-module is used to latch some special power down signals
+and generate interrupts, since the EIC-latch does not depend on the APB
+clock to capture signals.
+
+The EIC-async sub-module uses a 32kHz clock to capture the short signals
+(microsecond resolution) to generate interrupts by level or edge trigger.
+
+The EIC-sync is similar with GPIO's input function, which is a synchronized
+signal input register. It can generate interrupts by level or edge trigger
+when detecting input signals.
+
+Required properties:
+- compatible: Should be one of the following:
+  "sprd,sc9860-eic-debounce",
+  "sprd,sc9860-eic-latch",
+  "sprd,sc9860-eic-async",
+  "sprd,sc9860-eic-sync",
+  "sprd,sc27xx-eic".
+- reg: Define the base and range of the I/O address space containing
+  the GPIO controller registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the gpio number and
+  the second cell is used to specify optional parameters.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be <2>. Specifies the number of cells needed
+  to encode interrupt source.
+- interrupts: Should be the port interrupt shared by all the gpios.
+
+Example:
+	eic_debounce: gpio@40210000 {
+		compatible = "sprd,sc9860-eic-debounce";
+		reg = <0 0x40210000 0 0x80>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	eic_latch: gpio@40210080 {
+		compatible = "sprd,sc9860-eic-latch";
+		reg = <0 0x40210080 0 0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	eic_async: gpio@402100a0 {
+		compatible = "sprd,sc9860-eic-async";
+		reg = <0 0x402100a0 0 0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	eic_sync: gpio@402100c0 {
+		compatible = "sprd,sc9860-eic-sync";
+		reg = <0 0x402100c0 0 0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmic_eic: gpio@300 {
+		compatible = "sprd,sc27xx-eic";
+		reg = <0x300>;
+		interrupt-parent = <&sc2731_pmic>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
index 0d0158728f89..d2a937682836 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
@@ -16,6 +16,8 @@ Required properties:
 	nxp,pca9574
 	nxp,pca9575
 	nxp,pca9698
+	nxp,pcal6524
+	nxp,pcal9555a
 	maxim,max7310
 	maxim,max7312
 	maxim,max7313
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-sprd.txt
new file mode 100644
index 000000000000..eca97d45388f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-sprd.txt
@@ -0,0 +1,28 @@
+Spreadtrum GPIO controller bindings
+
+The controller's registers are organized as sets of sixteen 16-bit
+registers with each set controlling a bank of up to 16 pins. A single
+interrupt is shared for all of the banks handled by the controller.
+
+Required properties:
+- compatible: Should be "sprd,sc9860-gpio".
+- reg: Define the base and range of the I/O address space containing
+the GPIO controller registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the gpio number and
+the second cell is used to specify optional parameters.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be <2>. Specifies the number of cells needed
+to encode interrupt source.
+- interrupts: Should be the port interrupt shared by all the gpios.
+
+Example:
+	ap_gpio: gpio@40280000 {
+		compatible = "sprd,sc9860-gpio";
+		reg = <0 0x40280000 0 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt
deleted file mode 100644
index 528f5ef5a893..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-ImgTec TZ1090 PDC GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "img,tz1090-pdc-gpio".
-
-- reg: Physical base address of the controller and length of memory mapped
-  region. This starts at and cover the SOC_GPIO_CONTROL registers.
-
-- gpio-controller: Specifies that the node is a gpio controller.
-
-- #gpio-cells: Should be 2. The syntax of the gpio specifier used by client
-  nodes should have the following values.
-     <[phandle of the gpio controller node]
-      [PDC gpio number]
-      [gpio flags]>
-
-  Values for gpio specifier:
-  - GPIO number: a value in the range 0 to 6.
-  - GPIO flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
-    Only the following flags are supported:
-      GPIO_ACTIVE_HIGH
-      GPIO_ACTIVE_LOW
-
-Optional properties:
-- gpio-ranges: Mapping to pin controller pins (as described in
-  Documentation/devicetree/bindings/gpio/gpio.txt)
-
-- interrupts: Individual syswake interrupts (other GPIOs cannot interrupt)
-
-
-Example:
-
-	pdc_gpios: gpio-controller@2006500 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		compatible = "img,tz1090-pdc-gpio";
-		reg = <0x02006500 0x100>;
-
-		interrupt-parent = <&pdc>;
-		interrupts =	<8  IRQ_TYPE_NONE>,	/* Syswake 0 */
-				<9  IRQ_TYPE_NONE>,	/* Syswake 1 */
-				<10 IRQ_TYPE_NONE>;	/* Syswake 2 */
-		gpio-ranges = <&pdc_pinctrl 0 0 7>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt
deleted file mode 100644
index b05a90e0ab29..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-ImgTec TZ1090 GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "img,tz1090-gpio".
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- #address-cells: Should be 1 (for bank subnodes)
-
-- #size-cells: Should be 0 (for bank subnodes)
-
-- Each bank of GPIOs should have a subnode to represent it.
-
-  Bank subnode required properties:
-  - reg: Index of bank in the range 0 to 2.
-
-  - gpio-controller: Specifies that the node is a gpio controller.
-
-  - #gpio-cells: Should be 2. The syntax of the gpio specifier used by client
-    nodes should have the following values.
-       <[phandle of the gpio controller node]
-        [gpio number within the gpio bank]
-        [gpio flags]>
-
-    Values for gpio specifier:
-    - GPIO number: a value in the range 0 to 29.
-    - GPIO flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
-      Only the following flags are supported:
-        GPIO_ACTIVE_HIGH
-        GPIO_ACTIVE_LOW
-
-  Bank subnode optional properties:
-  - gpio-ranges: Mapping to pin controller pins (as described in
-    Documentation/devicetree/bindings/gpio/gpio.txt)
-
-  - interrupts: Interrupt for the entire bank
-
-  - interrupt-controller: Specifies that the node is an interrupt controller
-
-  - #interrupt-cells: Should be 2. The syntax of the interrupt specifier used by
-    client nodes should have the following values.
-       <[phandle of the interurupt controller]
-        [gpio number within the gpio bank]
-        [irq flags]>
-
-    Values for irq specifier:
-    - GPIO number: a value in the range 0 to 29
-    - IRQ flags: value to describe edge and level triggering, as defined in
-      <dt-bindings/interrupt-controller/irq.h>. Only the following flags are
-      supported:
-        IRQ_TYPE_EDGE_RISING
-        IRQ_TYPE_EDGE_FALLING
-        IRQ_TYPE_EDGE_BOTH
-        IRQ_TYPE_LEVEL_HIGH
-        IRQ_TYPE_LEVEL_LOW
-
-
-
-Example:
-
-	gpios: gpio-controller@2005800 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "img,tz1090-gpio";
-		reg = <0x02005800 0x90>;
-
-		/* bank 0 with an interrupt */
-		gpios0: bank@0 {
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			reg = <0>;
-			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&pinctrl 0 0 30>;
-			interrupt-controller;
-		};
-
-		/* bank 2 without interrupt */
-		gpios2: bank@2 {
-			#gpio-cells = <2>;
-			reg = <2>;
-			gpio-controller;
-			gpio-ranges = <&pinctrl 0 60 30>;
-		};
-	};
-
-
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index b5de08e3b1a2..a7c31de29362 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -151,9 +151,9 @@ in a lot of designs, some using all 32 bits, some using 18 and some using
 first 18 GPIOs, at local offset 0 .. 17, are in use.
 
 If these GPIOs do not happen to be the first N GPIOs at offset 0...N-1, an
-additional bitmask is needed to specify which GPIOs are actually in use,
-and which are dummies. The bindings for this case has not yet been
-specified, but should be specified if/when such hardware appears.
+additional set of tuples is needed to specify which GPIOs are unusable, with
+the gpio-reserved-ranges binding. This property indicates the start and size
+of the GPIOs that can't be used.
 
 Optionally, a GPIO controller may have a "gpio-line-names" property. This is
 an array of strings defining the names of the GPIO lines going out of the
@@ -178,6 +178,7 @@ gpio-controller@00000000 {
 	gpio-controller;
 	#gpio-cells = <2>;
 	ngpios = <18>;
+	gpio-reserved-ranges = <0 4>, <12 2>;
 	gpio-line-names = "MMC-CD", "MMC-WP", "VDD eth", "RST eth", "LED R",
 		"LED G", "LED B", "Col A", "Col B", "Col C", "Col D",
 		"Row A", "Row B", "Row C", "Row D", "NMI button",
diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
new file mode 100644
index 000000000000..20fc72d9e61e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
@@ -0,0 +1,27 @@
+Nintendo Wii (Hollywood) GPIO controller
+
+Required properties:
+- compatible: "nintendo,hollywood-gpio
+- reg: Physical base address and length of the controller's registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+   - bit 0 specifies polarity (0 for normal, 1 for inverted).
+
+Optional properties:
+- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
+  interrupt.
+- interrupt-parent: phandle of the parent interrupt controller.
+
+Example:
+
+	GPIO: gpio@d8000c0 {
+		#gpio-cells = <2>;
+		compatible = "nintendo,hollywood-gpio";
+		reg = <0x0d8000c0 0x40>;
+		gpio-controller;
+		ngpios = <24>;
+	}
diff --git a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
new file mode 100644
index 000000000000..ce97265e23ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
@@ -0,0 +1,30 @@
+Raspberry Pi GPIO expander
+
+The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The
+firmware exposes a mailbox interface that allows the ARM core to control the
+GPIO lines on the expander.
+
+The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi
+firmware node.
+
+Required properties:
+
+- compatible : Should be "raspberrypi,firmware-gpio"
+- gpio-controller : Marks the device node as a gpio controller
+- #gpio-cells : Should be two.  The first cell is the pin number, and
+  the second cell is used to specify the gpio polarity:
+  0 = active high
+  1 = active low
+
+Example:
+
+firmware: firmware-rpi {
+	compatible = "raspberrypi,bcm2835-firmware";
+	mboxes = <&mailbox>;
+
+	expgpio: gpio {
+		 compatible = "raspberrypi,firmware-gpio";
+		 gpio-controller;
+		 #gpio-cells = <2>;
+	 };
+};
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
index 36afa322b04b..a3dc4b9fa11a 100644
--- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -152,14 +152,7 @@ Nintendo Wii device tree
 
 1.l) The General Purpose I/O (GPIO) controller node
 
-  Represents the dual access 32 GPIO controller interface.
-
-  Required properties:
-
-  - #gpio-cells : <2>
-  - compatible : should be "nintendo,hollywood-gpio"
-  - reg : should contain the IPC registers location and length
-  - gpio-controller
+  see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
 
 1.m) The control node