Merge tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.4 kernel cycle:

  Core changes:

   - Fix errors in example code in the documentation.

  New drivers:

   - Add support for JZ4760, JZ4760B, X1000, X1000E and X1500 to the
     Ingenic driver.

   - Support Cirrus Logic Madera CS47L92 and CS47L15.

   - Support Allwinner Sunxi V3S.

   - Support Aspeed 2600 BMC.

   - Support Qualcomm SC7180.

   - Support Marvell MVEBU CS115.

  Driver improvements:

   - Clean up a few drivers to use the devm_platform_ioremap_resource()
     helper.

   - Pass the irqchip when registering the gpio_chip in some pin
     controllers that are also GPIO controllers.

   - Support suspend/resume in the Tegra driver.

   - Support pull-up on the Broadcom BCM2711.

   - The Intel driver can now request locked pads.

   - Fix the UFS reset pin in the Qualcomm SDM845 driver"

* tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits)
  pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c
  pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux()
  pinctrl: bcm: remove redundant assignment to pointer log
  pinctrl: iproc: Add 'get_direction' support
  pinctrl: iproc-gpio: Handle interrupts for multiple instances
  pinctrl: iproc-gpio: Fix incorrect pinconf configurations
  pinctrl: intel: mark intel_pin_to_gpio __maybe_unused
  pinctrl: qcom: sdm845: Fix UFS_RESET pin
  pinctrl: mvebu: add additional variant for standalone CP115
  pinctrl: mvebu: Add CP110 missing pin functionality
  dt-bindings: cp110: document the new CP115 pinctrl compatible
  pinctrl: bcm2835: Pass irqchip when adding gpiochip
  pinctrl: meson: meson: Add of_node_put() before return
  pinctrl/gpio: Take MUX usage into account
  dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support
  dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support
  dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support
  pinctrl: amd: disable spurious-firing GPIO IRQs
  pinctrl: rza2: Include the appropriate headers
  pinctrl: rza2: Drop driver use of consumer flags
  ...

11 files changed, 364 insertions, 68 deletions

diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
index 4db4119a6d19..f982a8ed9396 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
@@ -78,8 +78,8 @@ Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
 
 Required properties:
 
-- compatible: "marvell,armada-7k-pinctrl",
-  "marvell,armada-8k-cpm-pinctrl" or "marvell,armada-8k-cps-pinctrl"
+- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl",
+  "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl"
   depending on the specific variant of the SoC being used.
 
 Available mpp pins/groups and functions:
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
index ce8cf0ec6279..4d92c0bb6687 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
@@ -4,9 +4,7 @@ configuring elements such as clocks, pinmux, and reset.
 Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-scu", "syscon", "simple-mfd"
-		"aspeed,g4-scu", "syscon", "simple-mfd"
 		"aspeed,ast2500-scu", "syscon", "simple-mfd"
-		"aspeed,g5-scu", "syscon", "simple-mfd"
 
 - reg:		contains the offset and length of the SCU memory region
 - #clock-cells: should be set to <1> - the system controller is also a
diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
index 854bd67ffec6..0e1fa5bc6a30 100644
--- a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
@@ -26,9 +26,7 @@ property:
 
 - compatible : Should be one of the following:
 		"aspeed,ast2400-scu", "syscon", "simple-mfd"
-		"aspeed,g4-scu", "syscon", "simple-mfd"
 		"aspeed,ast2500-scu", "syscon", "simple-mfd"
-		"aspeed,g5-scu", "syscon", "simple-mfd"
 
 Example
 ===================
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 125599a2dc5e..39ad8657d018 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -15,16 +15,13 @@ description: |+
 
   - compatible:     Should be one of the following:
                     "aspeed,ast2400-scu", "syscon", "simple-mfd"
-                    "aspeed,g4-scu", "syscon", "simple-mfd"
 
   Refer to the the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.txt
 
 properties:
   compatible:
-    enum:
-      - aspeed,ast2400-pinctrl
-      - aspeed,g4-pinctrl
+    const: aspeed,ast2400-pinctrl
 
 patternProperties:
   '^.*$':
@@ -35,28 +32,24 @@ patternProperties:
         "^function|groups$":
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ "ACPI", "ADC0", "ADC1", "ADC10", "ADC11", "ADC12", "ADC13",
-              "ADC14", "ADC15", "ADC2", "ADC3", "ADC4", "ADC5", "ADC6", "ADC7",
-              "ADC8", "ADC9", "BMCINT", "DDCCLK", "DDCDAT", "EXTRST", "FLACK",
-              "FLBUSY", "FLWP", "GPID", "GPID0", "GPID2", "GPID4", "GPID6",
-              "GPIE0", "GPIE2", "GPIE4", "GPIE6", "I2C10", "I2C11", "I2C12",
-              "I2C13", "I2C14", "I2C3", "I2C4", "I2C5", "I2C6", "I2C7", "I2C8",
-              "I2C9", "LPCPD", "LPCPME", "LPCRST", "LPCSMI", "MAC1LINK",
-              "MAC2LINK", "MDIO1", "MDIO2", "NCTS1", "NCTS2", "NCTS3", "NCTS4",
-              "NDCD1", "NDCD2", "NDCD3", "NDCD4", "NDSR1", "NDSR2", "NDSR3",
-              "NDSR4", "NDTR1", "NDTR2", "NDTR3", "NDTR4", "NDTS4", "NRI1",
-              "NRI2", "NRI3", "NRI4", "NRTS1", "NRTS2", "NRTS3", "OSCCLK",
-              "PWM0", "PWM1", "PWM2", "PWM3", "PWM4", "PWM5", "PWM6", "PWM7",
-              "RGMII1", "RGMII2", "RMII1", "RMII2", "ROM16", "ROM8", "ROMCS1",
-              "ROMCS2", "ROMCS3", "ROMCS4", "RXD1", "RXD2", "RXD3", "RXD4",
-              "SALT1", "SALT2", "SALT3", "SALT4", "SD1", "SD2", "SGPMCK",
-              "SGPMI", "SGPMLD", "SGPMO", "SGPSCK", "SGPSI0", "SGPSI1", "SGPSLD",
-              "SIOONCTRL", "SIOPBI", "SIOPBO", "SIOPWREQ", "SIOPWRGD", "SIOS3",
-              "SIOS5", "SIOSCI", "SPI1", "SPI1DEBUG", "SPI1PASSTHRU", "SPICS1",
-              "TIMER3", "TIMER4", "TIMER5", "TIMER6", "TIMER7", "TIMER8", "TXD1",
-              "TXD2", "TXD3", "TXD4", "UART6", "USB11D1", "USB11H2", "USB2D1",
-              "USB2H1", "USBCKI", "VGABIOS_ROM", "VGAHS", "VGAVS", "VPI18",
-              "VPI24", "VPI30", "VPO12", "VPO24", "WDTRST1", "WDTRST2" ]
+            - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
+              ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
+              DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2,
+              GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12,
+              I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD,
+              LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1,
+              NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
+              NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2,
+              NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3,
+              PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16,
+              ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4,
+              SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+              SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG,
+              SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7,
+              TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1,
+              USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30,
+              VPO12, VPO24, WDTRST1, WDTRST2 ]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 3e6d85318577..3c6405be07ed 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -22,9 +22,7 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - aspeed,ast2500-pinctrl
-      - aspeed,g5-pinctrl
+    const: aspeed,ast2500-pinctrl
   aspeed,external-nodes:
     minItems: 2
     maxItems: 2
@@ -44,31 +42,26 @@ patternProperties:
         "^function|groups$":
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ "ACPI", "ADC0", "ADC1", "ADC10", "ADC11", "ADC12", "ADC13",
-              "ADC14", "ADC15", "ADC2", "ADC3", "ADC4", "ADC5", "ADC6", "ADC7",
-              "ADC8", "ADC9", "BMCINT", "DDCCLK", "DDCDAT", "ESPI", "FWSPICS1",
-              "FWSPICS2", "GPID0", "GPID2", "GPID4", "GPID6", "GPIE0", "GPIE2",
-              "GPIE4", "GPIE6", "I2C10", "I2C11", "I2C12", "I2C13", "I2C14",
-              "I2C3", "I2C4", "I2C5", "I2C6", "I2C7", "I2C8", "I2C9", "LAD0",
-              "LAD1", "LAD2", "LAD3", "LCLK", "LFRAME", "LPCHC", "LPCPD",
-              "LPCPLUS", "LPCPME", "LPCRST", "LPCSMI", "LSIRQ", "MAC1LINK",
-              "MAC2LINK", "MDIO1", "MDIO2", "NCTS1", "NCTS2", "NCTS3", "NCTS4",
-              "NDCD1", "NDCD2", "NDCD3", "NDCD4", "NDSR1", "NDSR2", "NDSR3",
-              "NDSR4", "NDTR1", "NDTR2", "NDTR3", "NDTR4", "NRI1", "NRI2",
-              "NRI3", "NRI4", "NRTS1", "NRTS2", "NRTS3", "NRTS4", "OSCCLK",
-              "PEWAKE", "PNOR", "PWM0", "PWM1", "PWM2", "PWM3", "PWM4", "PWM5",
-              "PWM6", "PWM7", "RGMII1", "RGMII2", "RMII1", "RMII2", "RXD1",
-              "RXD2", "RXD3", "RXD4", "SALT1", "SALT10", "SALT11", "SALT12",
-              "SALT13", "SALT14", "SALT2", "SALT3", "SALT4", "SALT5", "SALT6",
-              "SALT7", "SALT8", "SALT9", "SCL1", "SCL2", "SD1", "SD2", "SDA1",
-              "SDA2", "SGPS1", "SGPS2", "SIOONCTRL", "SIOPBI", "SIOPBO",
-              "SIOPWREQ", "SIOPWRGD", "SIOS3", "SIOS5", "SIOSCI", "SPI1",
-              "SPI1CS1", "SPI1DEBUG", "SPI1PASSTHRU", "SPI2CK", "SPI2CS0",
-              "SPI2CS1", "SPI2MISO", "SPI2MOSI", "TIMER3", "TIMER4", "TIMER5",
-              "TIMER6", "TIMER7", "TIMER8", "TXD1", "TXD2", "TXD3", "TXD4",
-              "UART6", "USB11BHID", "USB2AD", "USB2AH", "USB2BD", "USB2BH",
-              "USBCKI", "VGABIOSROM", "VGAHS", "VGAVS", "VPI24", "VPO",
-              "WDTRST1", "WDTRST2", ]
+            - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
+              ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
+              DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4,
+              GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13,
+              I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1,
+              LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST,
+              LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2,
+              NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
+              NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
+              NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2,
+              PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1,
+              RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
+              SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
+              SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI,
+              SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1,
+              SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO,
+              SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1,
+              TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD,
+              USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1,
+              WDTRST2, ]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
new file mode 100644
index 000000000000..f83d888176cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 Pin Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+  The pin controller node should be the child of a syscon node with the
+  required property:
+
+  - compatible: Should be one of the following:
+                "aspeed,ast2600-scu", "syscon", "simple-mfd"
+
+  Refer to the the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.txt
+
+properties:
+  compatible:
+    const: aspeed,ast2600-pinctrl
+
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        function:
+          allOf:
+            - $ref: "/schemas/types.yaml#/definitions/string"
+            - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
+              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1,
+              GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2,
+              GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12,
+              I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7,
+              I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC,
+              LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
+              MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
+              NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
+              NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
+              NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
+              PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7,
+              PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
+              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
+              SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
+              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SD3, SD3DAT4, SD3DAT5,
+              SD3DAT6, SD3DAT7, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO,
+              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1,
+              SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+              TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5,
+              TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1,
+              TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, UART6, UART7,
+              UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
+              WDTRST4, ]
+        groups:
+          allOf:
+            - $ref: "/schemas/types.yaml#/definitions/string"
+            - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
+              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, GPIT0,
+              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1,
+              I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3,
+              I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6,
+              JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+              MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3,
+              MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+              NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1,
+              NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE,
+              PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, PWM12G1,
+              PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, PWM3,
+              PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+              QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
+              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1,
+              SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1,
+              SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1,
+              SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9G0,
+              SALT9G1, SD1, SD2, SD3, SD3DAT4, SD3DAT5, SD3DAT6, SD3DAT7,
+              SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD,
+              SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+              SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13,
+              TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8,
+              TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4,
+              UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+              UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
+              WDTRST4, ]
+
+required:
+  - compatible
+
+examples:
+  - |
+    syscon: scu@1e6e2000 {
+        compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0xf6c>;
+
+        pinctrl: pinctrl {
+            compatible = "aspeed,g6-pinctrl";
+
+            pinctrl_pwm10g1_default: pwm10g1_default {
+                function = "PWM10";
+                groups = "PWM10G1";
+            };
+
+            pinctrl_gpioh0_unbiased_default: gpioh0 {
+                pins = "A18";
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index ac6d614d74e0..3cab7336a326 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -8,6 +8,7 @@ Required properties:
 - compatible: should be one of:
   "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl
   "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
+  "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl
 - reg: Should contain the physical address of the GPIO module's registers.
 - gpio-controller: Marks the device node as a GPIO controller.
 - #gpio-cells : Should be two. The first cell is the pin number and the
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
index af20b0ec715c..0014d9899797 100644
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
@@ -1,18 +1,18 @@
-Ingenic jz47xx pin controller
+Ingenic XBurst pin controller
 
 Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may
+For the XBurst SoCs, pin control is tightly bound with GPIO ports. All pins may
 be used as GPIOs, multiplexed device functions are configured within the
 GPIO port configuration registers and it is typical to refer to pins using the
 naming scheme "PxN" where x is a character identifying the GPIO port with
 which the pin is associated and N is an integer from 0 to 31 identifying the
 pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
-PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to
-PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a
-total of 192 pins.
+PB31 is the last pin in GPIO port B. The jz4740 and the x1000 contains 4 GPIO
+ports, PA to PD, for a total of 128 pins. The jz4760, the jz4770 and the jz4780
+contains 6 GPIO ports, PA to PF, for a total of 192 pins.
 
 
 Required properties:
@@ -21,8 +21,13 @@ Required properties:
  - compatible: One of:
     - "ingenic,jz4740-pinctrl"
     - "ingenic,jz4725b-pinctrl"
+    - "ingenic,jz4760-pinctrl"
+    - "ingenic,jz4760b-pinctrl"
     - "ingenic,jz4770-pinctrl"
     - "ingenic,jz4780-pinctrl"
+    - "ingenic,x1000-pinctrl"
+    - "ingenic,x1000e-pinctrl"
+    - "ingenic,x1500-pinctrl"
  - reg: Address range of the pinctrl registers.
 
 
@@ -31,8 +36,10 @@ Required properties for sub-nodes (GPIO chips):
 
  - compatible: Must contain one of:
     - "ingenic,jz4740-gpio"
+    - "ingenic,jz4760-gpio"
     - "ingenic,jz4770-gpio"
     - "ingenic,jz4780-gpio"
+    - "ingenic,x1000-gpio"
  - reg: The GPIO bank number.
  - interrupt-controller: Marks the device node as an interrupt controller.
  - interrupts: Interrupt specifier for the controllers interrupt.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
index cdec1eeb2799..c4de930f2406 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
@@ -132,9 +132,8 @@ to specify in a pin configuration subnode:
 		    qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41,
 		    sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu,
 		    spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1,
-		    tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
-		    tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
-		    tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+		    tsense_pwm1, tsense_pwm2, tsif0, tsif1,
+		    uim1_clk, uim1_data, uim1_present,
 		    uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
 		    uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0,
 		    vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1,
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 7f64a7e92c28..c32bf3237545 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -21,6 +21,8 @@ PMIC's from Qualcomm.
 		    "qcom,pmi8994-gpio"
 		    "qcom,pmi8998-gpio"
 		    "qcom,pms405-gpio"
+		    "qcom,pm8150-gpio"
+		    "qcom,pm8150b-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
 		    if the device is on an spmi bus or an ssbi bus respectively
@@ -94,6 +96,10 @@ to specify in a pin configuration subnode:
 		    gpio1-gpio22 for pma8084
 		    gpio1-gpio10 for pmi8994
 		    gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10)
+		    gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, gpio7
+					     and gpio8)
+		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
+		    gpio1-gpio12 for pm8150l (hole on gpio7)
 
 - function:
 	Usage: required
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
new file mode 100644
index 000000000000..b5767ee82ee6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
@@ -0,0 +1,186 @@
+Qualcomm Technologies, Inc. SC7180 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+SC7180 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sc7180-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the north, south and west
+		    TLMM tiles
+
+- reg-names:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: names for the cells of reg, must contain "north", "south"
+		    and "west".
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+- gpio-ranges:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition:  see ../gpio/gpio.txt
+
+- gpio-reserved-ranges:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.
+
+		    Valid pins are:
+		      gpio0-gpio118
+		        Supports mux, bias and drive-strength
+
+		      sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
+		      sdc2_data sdc1_rclk
+		        Supports bias and drive-strength
+
+		      ufs_reset
+			Supports bias and drive-strength
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+
+		    adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0,
+		    atest_char1, atest_char2, atest_char3, atest_tsens,
+		    atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+		    atest_usb12, atest_usb13, atest_usb2, atest_usb20,
+		    atest_usb21, atest_usb22, atest_usb23, audio_ref,
+		    btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
+		    cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+		    cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+		    ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, gcc_gp2,
+		    gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx,
+		    jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync,
+		    mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0,
+		    mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag,
+		    PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss,
+		    qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs,
+		    qspi_data, qup00, qup01, qup02, qup03, qup04, qup05,
+		    qup10, qup11, qup12, qup13, qup14, qup15, sdc1_tb,
+		    sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2,
+		    tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt,
+		    usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT,
+		    vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0,
+		    wlan2_adc1,
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	tlmm: pinctrl@3500000 {
+		compatible = "qcom,sc7180-pinctrl";
+		reg = <0x3500000 0x300000>,
+		      <0x3900000 0x300000>,
+		      <0x3D00000 0x300000>;
+		reg-names = "west", "north", "south";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&tlmm 0 0 119>;
+		gpio-reserved-ranges = <0 4>, <106 4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};