Orangefs: merge to v4.5

Merge tag 'v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into current

Linux 4.5

14 files changed, 218 insertions, 11 deletions

diff --git a/Documentation/ABI/testing/configfs-iio b/Documentation/ABI/testing/configfs-iio
new file mode 100644
index 000000000000..2483756fccf5
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-iio
@@ -0,0 +1,21 @@
+What:		/config/iio
+Date:		October 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This represents Industrial IO configuration entry point
+		directory. It contains sub-groups corresponding to IIO
+		objects.
+
+What:		/config/iio/triggers
+Date:		October 2015
+KernelVersion:	4.4
+Description:
+		Industrial IO software triggers directory.
+
+What:		/config/iio/triggers/hrtimers
+Date:		October 2015
+KernelVersion:	4.4
+Description:
+		High resolution timers directory. Creating a directory here
+		will result in creating a hrtimer trigger in the IIO subsystem.
diff --git a/Documentation/ABI/testing/configfs-rdma_cm b/Documentation/ABI/testing/configfs-rdma_cm
new file mode 100644
index 000000000000..5c389aaf5291
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-rdma_cm
@@ -0,0 +1,22 @@
+What: 		/config/rdma_cm
+Date: 		November 29, 2015
+KernelVersion:  4.4.0
+Description: 	Interface is used to configure RDMA-cable HCAs in respect to
+		RDMA-CM attributes.
+
+		Attributes are visible only when configfs is mounted. To mount
+		configfs in /config directory use:
+		# mount -t configfs none /config/
+
+		In order to set parameters related to a specific HCA, a directory
+		for this HCA has to be created:
+		mkdir -p /config/rdma_cm/<hca>
+
+
+What: 		/config/rdma_cm/<hca>/ports/<port-num>/default_roce_mode
+Date: 		November 29, 2015
+KernelVersion:  4.4.0
+Description: 	RDMA-CM based connections from HCA <hca> at port <port-num>
+		will be initiated with this RoCE type as default.
+		The possible RoCE types are either "IB/RoCE v1" or "RoCE v2".
+		This parameter has RW access.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
index bc7ff731aa0c..f56335af2d88 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
+++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
@@ -10,3 +10,5 @@ Description:
 		isoc_mult	- 0..2 (hs/ss only)
 		isoc_maxburst	- 0..15 (ss only)
 		buflen		- buffer length
+		bulk_qlen	- depth of queue for bulk
+		iso_qlen	- depth of queue for iso
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-tcm b/Documentation/ABI/testing/configfs-usb-gadget-tcm
new file mode 100644
index 000000000000..a29ed2dd6173
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-tcm
@@ -0,0 +1,6 @@
+What:		/config/usb-gadget/gadget/functions/tcm.name
+Date:		Dec 2015
+KernelVersion:	4.5
+Description:
+		There are no attributes because all the configuration
+		is performed in the "target" subsystem of configfs.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
new file mode 100644
index 000000000000..8916f7ec6507
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
@@ -0,0 +1,24 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_allow_async_readout
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		By default (value '0'), the capture thread checks for the Conversion
+		Ready Flag to being set prior to committing a new value to the sample
+		buffer. This synchronizes the in-chip conversion rate with the
+		in-driver readout rate at the cost of an additional register read.
+
+		Writing '1' will remove the polling for the Conversion Ready Flags to
+		save the additional i2c transaction, which will improve the bandwidth
+		available for reading data. However, samples can be occasionally skipped
+		or repeated, depending on the beat between the capture and conversion
+		rates.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistor
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value of the shunt resistor may be known only at runtime fom an
+		eeprom content read by a client application. This attribute allows to
+		set its value in ohms.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 3a4abfc44f5e..0bd731cbb50c 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -134,19 +134,21 @@ Description:
 		enabled for the device. Developer can write y/Y/1 or n/N/0 to
 		the file to enable/disable the feature.
 
-What:		/sys/bus/usb/devices/.../power/usb3_hardware_lpm
-Date:		June 2015
+What:		/sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1
+		/sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2
+Date:		November 2015
 Contact:	Kevin Strasser <kevin.strasser@linux.intel.com>
+		Lu Baolu <baolu.lu@linux.intel.com>
 Description:
 		If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
 		in to a xHCI host which supports link PM, it will check if U1
 		and U2 exit latencies have been set in the BOS descriptor; if
-		the check is is passed and the host supports USB3 hardware LPM,
+		the check is passed and the host supports USB3 hardware LPM,
 		USB3 hardware LPM will be enabled for the device and the USB
-		device directory will contain a file named
-		power/usb3_hardware_lpm. The file holds a string value (enable
-		or disable) indicating whether or not USB3 hardware LPM is
-		enabled for the device.
+		device directory will contain two files named
+		power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These
+		files hold a string value (enable or disable) indicating whether
+		or not USB3 hardware LPM U1 or U2 is enabled for the device.
 
 What:		/sys/bus/usb/devices/.../removable
 Date:		February 2012
@@ -187,6 +189,17 @@ Description:
 		The file will read "hotplug", "wired" and "not used" if the
 		information is available, and "unknown" otherwise.
 
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
+Date:		November 2015
+Contact:	Lu Baolu <baolu.lu@linux.intel.com>
+Description:
+		Some USB3.0 devices are not friendly to USB3 LPM.  usb3_lpm_permit
+		attribute allows enabling/disabling usb3 lpm of a port. It takes
+		effect both before and after a usb device is enumerated. Supported
+		values are "0" if both u1 and u2 are NOT permitted, "u1" if only u1
+		is permitted, "u2" if only u2 is permitted, "u1_u2" if both u1 and
+		u2 are permitted.
+
 What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
 Date:		May 2013
 Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
diff --git a/Documentation/ABI/testing/sysfs-class-infiniband b/Documentation/ABI/testing/sysfs-class-infiniband
new file mode 100644
index 000000000000..a86abe66a316
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-infiniband
@@ -0,0 +1,16 @@
+What:		/sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/ndevs/<gid-index>
+Date:		November 29, 2015
+KernelVersion:	4.4.0
+Contact:	linux-rdma@vger.kernel.org
+Description: 	The net-device's name associated with the GID resides
+		at index <gid-index>.
+
+What:		/sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/types/<gid-index>
+Date:		November 29, 2015
+KernelVersion:	4.4.0
+Contact:	linux-rdma@vger.kernel.org
+Description: 	The RoCE type of the associated GID resides at index <gid-index>.
+		This could either be "IB/RoCE v1" for IB and RoCE v1 based GODs
+		or "RoCE v2" for RoCE v2 based GIDs.
+
+
diff --git a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
index 5cedf72df358..f7be0e88b139 100644
--- a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
+++ b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
@@ -19,6 +19,25 @@ Description:
 		Set to 0 to pad all frames. Set greater than tx_max to
 		disable all padding.
 
+What:		/sys/class/net/<iface>/cdc_ncm/ndp_to_end
+Date:		Dec 2015
+KernelVersion:	4.5
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Boolean attribute showing the status of the "NDP to
+		end" quirk.  Defaults to 'N', except for devices
+		already known to need it enabled.
+
+		The "NDP to end" quirk makes the driver place the NDP
+		(the packet index table) after the payload.  The NCM
+		specification does not mandate this, but some devices
+		are known to be more restrictive. Write 'Y' to this
+		attribute for temporary testing of a suspect device
+		failing to work with the default driver settings.
+
+		A device entry should be added to the driver if this
+		quirk is found to be required.
+
 What:		/sys/class/net/<iface>/cdc_ncm/rx_max
 Date:		May 2014
 KernelVersion:	3.16
diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
index c46406296631..c2b956d44a95 100644
--- a/Documentation/ABI/testing/sysfs-class-net-mesh
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -8,7 +8,7 @@ Description:
 
 What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
 Date:           May 2011
-Contact:        Antonio Quartulli <antonio@meshcoding.com>
+Contact:        Antonio Quartulli <a@unstable.cc>
 Description:
                 Indicates whether the data traffic going from a
                 wireless client to another wireless client will be
@@ -70,7 +70,7 @@ Description:
 
 What:		/sys/class/net/<mesh_iface>/mesh/isolation_mark
 Date:		Nov 2013
-Contact:	Antonio Quartulli <antonio@meshcoding.com>
+Contact:	Antonio Quartulli <a@unstable.cc>
 Description:
 		Defines the isolation mark (and its bitmask) which
 		is used to classify clients as "isolated" by the
diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi
new file mode 100644
index 000000000000..fa5a00bb1143
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -0,0 +1,23 @@
+What:		/sys/class/net/<iface>/qmi/raw_ip
+Date:		Dec 2015
+KernelVersion:	4.4
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Boolean.  Default: 'N'
+
+		Set this to 'Y' to change the network device link
+		framing from '802.3' to 'raw-ip'.
+
+		The netdev will change to reflect the link framing
+		mode.  The netdev is an ordinary ethernet device in
+		'802.3' mode, and the driver expects to exchange
+		frames with an ethernet header over the USB link. The
+		netdev is a headerless p-t-p device in 'raw-ip' mode,
+		and the driver expects to echange IPv4 or IPv6 packets
+		without any L2 header over the USB link.
+
+		Userspace is in full control of firmware configuration
+		through the delegation of the QMI protocol. Userspace
+		is responsible for coordination of driver and firmware
+		link framing mode, changing this setting to 'Y' if the
+		firmware is configured for 'raw-ip' mode.
diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog
new file mode 100644
index 000000000000..736046b33040
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-watchdog
@@ -0,0 +1,51 @@
+What:		/sys/class/watchdog/watchdogn/bootstatus
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains status of the watchdog
+		device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
+		ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/identity
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains identity string of
+		watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/nowayout
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. While reading, it gives '1' if that
+		device supports nowayout feature else, it gives '0'.
+
+What:		/sys/class/watchdog/watchdogn/state
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It gives active/inactive status of
+		watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/status
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains watchdog device's
+		internal status bits. It is equivalent to WDIOC_GETSTATUS
+		of ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/timeleft
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains value of time left for
+		reset generation. It is equivalent to WDIOC_GETTIMELEFT of
+		ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/timeout
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It is read to know about current
+		value of timeout programmed.
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index 0345f2d1c727..e5200f354abf 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -87,6 +87,12 @@ Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:
 		 Controls the checkpoint timing.
 
+What:		/sys/fs/f2fs/<disk>/idle_interval
+Date:		January 2016
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the idle timing.
+
 What:		/sys/fs/f2fs/<disk>/ra_nid_pages
 Date:		October 2015
 Contact:	"Chao Yu" <chao2.yu@samsung.com>
diff --git a/Documentation/ABI/testing/sysfs-kernel-livepatch b/Documentation/ABI/testing/sysfs-kernel-livepatch
index 5bf42a840b22..da87f43aec58 100644
--- a/Documentation/ABI/testing/sysfs-kernel-livepatch
+++ b/Documentation/ABI/testing/sysfs-kernel-livepatch
@@ -33,7 +33,7 @@ Description:
 		The object directory contains subdirectories for each function
 		that is patched within the object.
 
-What:		/sys/kernel/livepatch/<patch>/<object>/<function>
+What:		/sys/kernel/livepatch/<patch>/<object>/<function,sympos>
 Date:		Nov 2014
 KernelVersion:	3.19.0
 Contact:	live-patching@vger.kernel.org
@@ -41,4 +41,8 @@ Description:
 		The function directory contains attributes regarding the
 		properties and state of the patched function.
 
+		The directory name contains the patched function name and a
+		sympos number corresponding to the nth occurrence of the symbol
+		name in kallsyms for the patched object.
+
 		There are currently no such attributes.
diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp
index 44806a678f12..a17f817a9309 100644
--- a/Documentation/ABI/testing/sysfs-ptp
+++ b/Documentation/ABI/testing/sysfs-ptp
@@ -74,7 +74,7 @@ Description:
 		assignment may be changed by two writing numbers into
 		the file.
 
-What:		/sys/class/ptp/ptpN/pps_avaiable
+What:		/sys/class/ptp/ptpN/pps_available
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description: