ASoC: Allow configuration of WM8904 GPIO pin functions

Provide platform data allowing the configuration of the GPIO pins
on the WM8904 to be selected, allowing alternate functions to be
enabled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

3 files changed, 84 insertions, 66 deletions

diff --git a/include/sound/wm8904.h b/include/sound/wm8904.h
index d66575a601be..ddeeebf7c426 100644
--- a/include/sound/wm8904.h
+++ b/include/sound/wm8904.h
@@ -15,8 +15,76 @@
 #ifndef __MFD_WM8994_PDATA_H__
 #define __MFD_WM8994_PDATA_H__
 
-#define WM8904_DRC_REGS 4
-#define WM8904_EQ_REGS  25
+/* Used to enable configuration of a GPIO to all zeros */
+#define WM8904_GPIO_NO_CONFIG 0x8000
+
+/*
+ * R121 (0x79) - GPIO Control 1
+ */
+#define WM8904_GPIO1_PU                         0x0020  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_MASK                    0x0020  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_SHIFT                        5  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_WIDTH                        1  /* GPIO1_PU */
+#define WM8904_GPIO1_PD                         0x0010  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_MASK                    0x0010  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_SHIFT                        4  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_WIDTH                        1  /* GPIO1_PD */
+#define WM8904_GPIO1_SEL_MASK                   0x000F  /* GPIO1_SEL - [3:0] */
+#define WM8904_GPIO1_SEL_SHIFT                       0  /* GPIO1_SEL - [3:0] */
+#define WM8904_GPIO1_SEL_WIDTH                       4  /* GPIO1_SEL - [3:0] */
+
+/*
+ * R122 (0x7A) - GPIO Control 2
+ */
+#define WM8904_GPIO2_PU                         0x0020  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_MASK                    0x0020  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_SHIFT                        5  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_WIDTH                        1  /* GPIO2_PU */
+#define WM8904_GPIO2_PD                         0x0010  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_MASK                    0x0010  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_SHIFT                        4  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_WIDTH                        1  /* GPIO2_PD */
+#define WM8904_GPIO2_SEL_MASK                   0x000F  /* GPIO2_SEL - [3:0] */
+#define WM8904_GPIO2_SEL_SHIFT                       0  /* GPIO2_SEL - [3:0] */
+#define WM8904_GPIO2_SEL_WIDTH                       4  /* GPIO2_SEL - [3:0] */
+
+/*
+ * R123 (0x7B) - GPIO Control 3
+ */
+#define WM8904_GPIO3_PU                         0x0020  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_MASK                    0x0020  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_SHIFT                        5  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_WIDTH                        1  /* GPIO3_PU */
+#define WM8904_GPIO3_PD                         0x0010  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_MASK                    0x0010  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_SHIFT                        4  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_WIDTH                        1  /* GPIO3_PD */
+#define WM8904_GPIO3_SEL_MASK                   0x000F  /* GPIO3_SEL - [3:0] */
+#define WM8904_GPIO3_SEL_SHIFT                       0  /* GPIO3_SEL - [3:0] */
+#define WM8904_GPIO3_SEL_WIDTH                       4  /* GPIO3_SEL - [3:0] */
+
+/*
+ * R124 (0x7C) - GPIO Control 4
+ */
+#define WM8904_GPI7_ENA                         0x0200  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_MASK                    0x0200  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_SHIFT                        9  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_WIDTH                        1  /* GPI7_ENA */
+#define WM8904_GPI8_ENA                         0x0100  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_MASK                    0x0100  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_SHIFT                        8  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_WIDTH                        1  /* GPI8_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA               0x0080  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_MASK          0x0080  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_SHIFT              7  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_WIDTH              1  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_SEL_MASK               0x000F  /* GPIO_BCLK_SEL - [3:0] */
+#define WM8904_GPIO_BCLK_SEL_SHIFT                   0  /* GPIO_BCLK_SEL - [3:0] */
+#define WM8904_GPIO_BCLK_SEL_WIDTH                   4  /* GPIO_BCLK_SEL - [3:0] */
+
+#define WM8904_GPIO_REGS 4
+#define WM8904_DRC_REGS  4
+#define WM8904_EQ_REGS   25
 
 /**
  * DRC configurations are specified with a label and a set of register
@@ -52,6 +120,8 @@ struct wm8904_pdata {
 
 	int num_retune_mobile_cfgs;
 	struct wm8904_retune_mobile_cfg *retune_mobile_cfgs;
+
+	u32 gpio_cfg[WM8904_GPIO_REGS];
 };
 
 #endif
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 593e47d0e0eb..ce3f004217ae 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -2425,6 +2425,7 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_wm8904);
 static int wm8904_register(struct wm8904_priv *wm8904,
 			   enum snd_soc_control_type control)
 {
+	struct wm8904_pdata *pdata = wm8904->pdata;
 	int ret;
 	struct snd_soc_codec *codec = &wm8904->codec;
 	int i;
@@ -2530,6 +2531,17 @@ static int wm8904_register(struct wm8904_priv *wm8904,
 		WM8904_LINEOUTRZC;
 	wm8904->reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
 
+	/* Apply configuration from the platform data. */
+	if (wm8904->pdata) {
+		for (i = 0; i < WM8904_GPIO_REGS; i++) {
+			if (!pdata->gpio_cfg[i])
+				continue;
+
+			wm8904->reg_cache[WM8904_GPIO_CONTROL_1 + i]
+				= pdata->gpio_cfg[i] & 0xffff;
+		}
+	}
+
 	/* Set Class W by default - this will be managed by the Class
 	 * G widget at runtime where bypass paths are available.
 	 */
diff --git a/sound/soc/codecs/wm8904.h b/sound/soc/codecs/wm8904.h
index b68886df34e4..10603a75c1a5 100644
--- a/sound/soc/codecs/wm8904.h
+++ b/sound/soc/codecs/wm8904.h
@@ -1200,70 +1200,6 @@ extern struct snd_soc_codec_device soc_codec_dev_wm8904;
 #define WM8904_FLL_CLK_REF_SRC_WIDTH                 2  /* FLL_CLK_REF_SRC - [1:0] */
 
 /*
- * R121 (0x79) - GPIO Control 1
- */
-#define WM8904_GPIO1_PU                         0x0020  /* GPIO1_PU */
-#define WM8904_GPIO1_PU_MASK                    0x0020  /* GPIO1_PU */
-#define WM8904_GPIO1_PU_SHIFT                        5  /* GPIO1_PU */
-#define WM8904_GPIO1_PU_WIDTH                        1  /* GPIO1_PU */
-#define WM8904_GPIO1_PD                         0x0010  /* GPIO1_PD */
-#define WM8904_GPIO1_PD_MASK                    0x0010  /* GPIO1_PD */
-#define WM8904_GPIO1_PD_SHIFT                        4  /* GPIO1_PD */
-#define WM8904_GPIO1_PD_WIDTH                        1  /* GPIO1_PD */
-#define WM8904_GPIO1_SEL_MASK                   0x000F  /* GPIO1_SEL - [3:0] */
-#define WM8904_GPIO1_SEL_SHIFT                       0  /* GPIO1_SEL - [3:0] */
-#define WM8904_GPIO1_SEL_WIDTH                       4  /* GPIO1_SEL - [3:0] */
-
-/*
- * R122 (0x7A) - GPIO Control 2
- */
-#define WM8904_GPIO2_PU                         0x0020  /* GPIO2_PU */
-#define WM8904_GPIO2_PU_MASK                    0x0020  /* GPIO2_PU */
-#define WM8904_GPIO2_PU_SHIFT                        5  /* GPIO2_PU */
-#define WM8904_GPIO2_PU_WIDTH                        1  /* GPIO2_PU */
-#define WM8904_GPIO2_PD                         0x0010  /* GPIO2_PD */
-#define WM8904_GPIO2_PD_MASK                    0x0010  /* GPIO2_PD */
-#define WM8904_GPIO2_PD_SHIFT                        4  /* GPIO2_PD */
-#define WM8904_GPIO2_PD_WIDTH                        1  /* GPIO2_PD */
-#define WM8904_GPIO2_SEL_MASK                   0x000F  /* GPIO2_SEL - [3:0] */
-#define WM8904_GPIO2_SEL_SHIFT                       0  /* GPIO2_SEL - [3:0] */
-#define WM8904_GPIO2_SEL_WIDTH                       4  /* GPIO2_SEL - [3:0] */
-
-/*
- * R123 (0x7B) - GPIO Control 3
- */
-#define WM8904_GPIO3_PU                         0x0020  /* GPIO3_PU */
-#define WM8904_GPIO3_PU_MASK                    0x0020  /* GPIO3_PU */
-#define WM8904_GPIO3_PU_SHIFT                        5  /* GPIO3_PU */
-#define WM8904_GPIO3_PU_WIDTH                        1  /* GPIO3_PU */
-#define WM8904_GPIO3_PD                         0x0010  /* GPIO3_PD */
-#define WM8904_GPIO3_PD_MASK                    0x0010  /* GPIO3_PD */
-#define WM8904_GPIO3_PD_SHIFT                        4  /* GPIO3_PD */
-#define WM8904_GPIO3_PD_WIDTH                        1  /* GPIO3_PD */
-#define WM8904_GPIO3_SEL_MASK                   0x000F  /* GPIO3_SEL - [3:0] */
-#define WM8904_GPIO3_SEL_SHIFT                       0  /* GPIO3_SEL - [3:0] */
-#define WM8904_GPIO3_SEL_WIDTH                       4  /* GPIO3_SEL - [3:0] */
-
-/*
- * R124 (0x7C) - GPIO Control 4
- */
-#define WM8904_GPI7_ENA                         0x0200  /* GPI7_ENA */
-#define WM8904_GPI7_ENA_MASK                    0x0200  /* GPI7_ENA */
-#define WM8904_GPI7_ENA_SHIFT                        9  /* GPI7_ENA */
-#define WM8904_GPI7_ENA_WIDTH                        1  /* GPI7_ENA */
-#define WM8904_GPI8_ENA                         0x0100  /* GPI8_ENA */
-#define WM8904_GPI8_ENA_MASK                    0x0100  /* GPI8_ENA */
-#define WM8904_GPI8_ENA_SHIFT                        8  /* GPI8_ENA */
-#define WM8904_GPI8_ENA_WIDTH                        1  /* GPI8_ENA */
-#define WM8904_GPIO_BCLK_MODE_ENA               0x0080  /* GPIO_BCLK_MODE_ENA */
-#define WM8904_GPIO_BCLK_MODE_ENA_MASK          0x0080  /* GPIO_BCLK_MODE_ENA */
-#define WM8904_GPIO_BCLK_MODE_ENA_SHIFT              7  /* GPIO_BCLK_MODE_ENA */
-#define WM8904_GPIO_BCLK_MODE_ENA_WIDTH              1  /* GPIO_BCLK_MODE_ENA */
-#define WM8904_GPIO_BCLK_SEL_MASK               0x000F  /* GPIO_BCLK_SEL - [3:0] */
-#define WM8904_GPIO_BCLK_SEL_SHIFT                   0  /* GPIO_BCLK_SEL - [3:0] */
-#define WM8904_GPIO_BCLK_SEL_WIDTH                   4  /* GPIO_BCLK_SEL - [3:0] */
-
-/*
  * R126 (0x7E) - Digital Pulls
  */
 #define WM8904_MCLK_PU                          0x0080  /* MCLK_PU */