Merge tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull arm SoC platform updates from Arnd Bergmann:
 "The majority of the updates here are Dmitry Torokhov's cleanups for
  platform code in the pxa and tegra platforms, changing custom
  platform_data structures into DT-compatible software node
  declarations.

  The other updates are for the MAINTAINERS file, correcting some stale
  or missing entries"

* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: pxa: fix build breakage on PXA3xx
  ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
  amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
  MAINTAINERS: thead: add git tree
  ARM: spitz: Use software nodes for the ADS7846 touchscreen
  ARM: spitz: Use software nodes to describe LED GPIOs
  ARM: spitz: Use software nodes to describe MMC GPIOs
  ARM: spitz: Use software nodes to describe LCD GPIOs
  ARM: spitz: Use software nodes to describe audio GPIOs
  ARM: spitz: Use software nodes to describe SPI CS lines
  ARM: spitz: Simplify instantiating SPI controller
  ARM: pxa/gumstix: convert vbus gpio to use software nodes
  ARM: pxa: consolidate GPIO chip platform data
  ARM: spitz: fix GPIO assignment for backlight
  ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
  MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
  bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
  arm64: layerscape: remove redundant EDAC_SUPPORT selection
  dt-bindings: arm: Remove obsolete RTSM DCSCB binding
  arm: vexpress: Remove obsolete RTSM DCSCB support

18 files changed, 264 insertions, 440 deletions

diff --git a/CREDITS b/CREDITS
index f87c0fa62cfc..1a762cf46b49 100644
--- a/CREDITS
+++ b/CREDITS
@@ -796,6 +796,11 @@ E: luisfcorreia@gmail.com
 D: Ralink rt2x00 WLAN driver
 S: Belas, Portugal
 
+N: Benoît Cousson
+E: bcousson@baylibre.com
+D: TI OMAP Devicetree platforms
+D: TI OMAP HWMOD boards
+
 N: Alan Cox
 W: http://www.linux.org.uk/diary/
 D: Linux Networking (0.99.10->2.0.29)
@@ -4368,6 +4373,10 @@ N: Haojian Zhuang
 E: haojian.zhuang@gmail.com
 D: MMP support
 
+N: Tsahee Zidenberg
+E: tsahee@annapurnalabs.com
+D: Annapurna Labs Alpine Architecture
+
 N: Richard Zidlicky
 E: rz@linux-m68k.org, rdzidlic@geocities.com
 W: http://www.geocities.com/rdzidlic
diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
deleted file mode 100644
index 3b8fbf3c00c5..000000000000
--- a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-ARM Dual Cluster System Configuration Block
--------------------------------------------
-
-The Dual Cluster System Configuration Block (DCSCB) provides basic
-functionality for controlling clocks, resets and configuration pins in
-the Dual Cluster System implemented by the Real-Time System Model (RTSM).
-
-Required properties:
-
-- compatible : should be "arm,rtsm,dcscb"
-
-- reg : physical base address and the size of the registers window
-
-Example:
-
-	dcscb@60000000 {
-		compatible = "arm,rtsm,dcscb";
-		reg = <0x60000000 0x1000>;
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index ee3a3bbae1c1..104ccfea9e57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1887,6 +1887,15 @@ F:	include/dt-bindings/reset/actions,*
 F:	include/linux/soc/actions/
 N:	owl
 
+ARM/AIROHA SOC SUPPORT
+M:	Matthias Brugger <matthias.bgg@gmail.com>
+M:	AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
+S:	Odd Fixes
+F:	arch/arm/boot/dts/airoha/
+F:	arch/arm64/boot/dts/airoha/
+
 ARM/Allwinner SoC Clock Support
 M:	Emilio López <emilio@elopez.com.ar>
 S:	Maintained
@@ -1974,10 +1983,9 @@ F:	drivers/soc/amlogic/
 N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
-M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
 M:	Antoine Tenart <atenart@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/boot/dts/amazon/
 F:	arch/arm/mach-alpine/
 F:	arch/arm64/boot/dts/amazon/
@@ -16414,7 +16422,6 @@ S:	Maintained
 F:	arch/arm/*omap*/*clock*
 
 OMAP DEVICE TREE SUPPORT
-M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 L:	devicetree@vger.kernel.org
@@ -16469,7 +16476,6 @@ S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod*data*
 
 OMAP HWMOD SUPPORT
-M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
@@ -19416,6 +19422,7 @@ F:	arch/riscv/boot/dts/
 X:	arch/riscv/boot/dts/allwinner/
 X:	arch/riscv/boot/dts/renesas/
 X:	arch/riscv/boot/dts/sophgo/
+X:	arch/riscv/boot/dts/thead/
 
 RISC-V PMU DRIVERS
 M:	Atish Patra <atishp@atishpatra.org>
@@ -19432,6 +19439,7 @@ M:	Guo Ren <guoren@kernel.org>
 M:	Fu Wei <wefu@redhat.com>
 L:	linux-riscv@lists.infradead.org
 S:	Maintained
+T:	git https://github.com/pdp7/linux.git
 F:	arch/riscv/boot/dts/thead/
 
 RNBD BLOCK DRIVERS
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index 96ad442089bd..cdb6065e04fd 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -14,7 +14,6 @@ CONFIG_CPUSETS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_VEXPRESS_DCSCB=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
 CONFIG_SMP=y
 CONFIG_HAVE_ARM_ARCH_TIMER=y
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 1e4cd502340e..7695cfce01a1 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -7,6 +7,7 @@
 #include <linux/clk-provider.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
+#include <linux/gpio-pxa.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/soc/pxa/cpu.h>
 
@@ -17,6 +18,7 @@
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmp_dma.h>
 
+#include "mfp-pxa2xx.h"
 #include "regs-ost.h"
 #include "reset.h"
 #include "devices.h"
@@ -46,7 +48,7 @@ struct platform_device pxa_device_pmu = {
 	.num_resources	= 1,
 };
 
-static struct resource pxamci_resources[] = {
+static const struct resource pxamci_resources[] = {
 	[0] = {
 		.start	= 0x41100000,
 		.end	= 0x41100fff,
@@ -59,22 +61,26 @@ static struct resource pxamci_resources[] = {
 	},
 };
 
-static u64 pxamci_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_mci = {
-	.name		= "pxa2xx-mci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxamci_resources),
-	.resource	= pxamci_resources,
-};
-
-void __init pxa_set_mci_info(struct pxamci_platform_data *info)
+void __init pxa_set_mci_info(const struct pxamci_platform_data *info,
+			     const struct property_entry *props)
 {
-	pxa_register_device(&pxa_device_mci, info);
+	const struct platform_device_info mci_info = {
+		.name		= "pxa2xx-mci",
+		.id		= 0,
+		.res		= pxamci_resources,
+		.num_res	= ARRAY_SIZE(pxamci_resources),
+		.data		= info,
+		.size_data	= sizeof(*info),
+		.dma_mask	= 0xffffffffUL,
+		.properties	= props,
+	};
+	struct platform_device *mci_dev;
+	int err;
+
+	mci_dev = platform_device_register_full(&mci_info);
+	err = PTR_ERR_OR_ZERO(mci_dev);
+	if (err)
+		pr_err("Unable to create mci device: %d\n", err);
 }
 
 static struct pxa2xx_udc_mach_info pxa_udc_info = {
@@ -627,6 +633,11 @@ struct platform_device pxa27x_device_pwm1 = {
 };
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+const struct software_node pxa2xx_gpiochip_node = {
+	.name	= "gpio-pxa",
+};
+
 struct resource pxa_resource_gpio[] = {
 	{
 		.start	= 0x40e00000,
@@ -650,11 +661,19 @@ struct resource pxa_resource_gpio[] = {
 	},
 };
 
+static struct pxa_gpio_platform_data pxa2xx_gpio_info = {
+	.irq_base	= PXA_GPIO_TO_IRQ(0),
+	.gpio_set_wake	= gpio_set_wake,
+};
+
 struct platform_device pxa25x_device_gpio = {
 	.name		= "pxa25x-gpio",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,
+	.dev		= {
+		.platform_data	= &pxa2xx_gpio_info,
+	},
 };
 
 struct platform_device pxa27x_device_gpio = {
@@ -662,7 +681,11 @@ struct platform_device pxa27x_device_gpio = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,
+	.dev		= {
+		.platform_data	= &pxa2xx_gpio_info,
+	},
 };
+#endif /* CONFIG_PXA25x || CONFIG_PXA27x */
 
 static struct resource pxa_dma_resource[] = {
 	[0] = {
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 82c83939017a..72c556ff67db 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -4,7 +4,6 @@
 struct mmp_dma_platdata;
 
 extern struct platform_device pxa_device_pmu;
-extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
 extern struct platform_device pxa25x_device_udc;
@@ -53,8 +52,8 @@ extern struct platform_device pxa_device_asoc_ssp4;
 
 extern struct platform_device pxa25x_device_gpio;
 extern struct platform_device pxa27x_device_gpio;
-extern struct platform_device pxa3xx_device_gpio;
-extern struct platform_device pxa93x_device_gpio;
+
+extern const struct software_node pxa2xx_gpiochip_node;
 
 void __init pxa_register_device(struct platform_device *dev, void *data);
 void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index c9f0f62187bd..efa6faa62a2c 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -90,7 +90,7 @@ static struct pxamci_platform_data gumstix_mci_platform_data = {
 
 static void __init gumstix_mmc_init(void)
 {
-	pxa_set_mci_info(&gumstix_mci_platform_data);
+	pxa_set_mci_info(&gumstix_mci_platform_data, NULL);
 }
 #else
 static void __init gumstix_mmc_init(void)
@@ -100,26 +100,22 @@ static void __init gumstix_mmc_init(void)
 #endif
 
 #ifdef CONFIG_USB_PXA25X
-static struct gpiod_lookup_table gumstix_gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOn,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOx,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry spitz_mci_props[] __initconst = {
+	PROPERTY_ENTRY_GPIO("vbus-gpios", &pxa2xx_gpiochip_node,
+			    GPIO_GUMSTIX_USB_GPIOn, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("pullup-gpios", &pxa2xx_gpiochip_node,
+			    GPIO_GUMSTIX_USB_GPIOx, GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct platform_device gumstix_gpio_vbus = {
+static const struct platform_device_info gumstix_gpio_vbus_info __initconst = {
 	.name	= "gpio-vbus",
-	.id	= -1,
+	.id	= PLATFORM_DEVID_NONE,
 };
 
 static void __init gumstix_udc_init(void)
 {
-	gpiod_add_lookup_table(&gumstix_gpio_vbus_gpiod_table);
-	platform_device_register(&gumstix_gpio_vbus);
+	platform_device_register_full(&gumstix_gpio_vbus_info);
 }
 #else
 static void gumstix_udc_init(void)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 02712d24be82..03e34841fc00 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -178,12 +178,8 @@ void __init pxa25x_map_io(void)
 	pxa25x_get_clk_frequency_khz(1);
 }
 
-static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-	.gpio_set_wake	= gpio_set_wake,
-};
-
 static struct platform_device *pxa25x_devices[] __initdata = {
+	&pxa25x_device_gpio,
 	&pxa25x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -243,8 +239,8 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
 		if (!of_have_populated_dt()) {
+			software_node_register(&pxa2xx_gpiochip_node);
 			pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
-			pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 			ret = platform_add_devices(pxa25x_devices,
 						   ARRAY_SIZE(pxa25x_devices));
 		}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d71491e2e1d6..f8382477d629 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -276,12 +276,8 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
-static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-	.gpio_set_wake	= gpio_set_wake,
-};
-
 static struct platform_device *devices[] __initdata = {
+	&pxa27x_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -345,8 +341,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
 		if (!of_have_populated_dt()) {
-			pxa_register_device(&pxa27x_device_gpio,
-					    &pxa27x_gpio_info);
+			software_node_register(&pxa2xx_gpiochip_node);
 			pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3c5f5a3cb480..452bf7aac1fa 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -14,6 +14,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
@@ -28,6 +29,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
+#include <linux/property.h>
 #include <linux/reboot.h>
 #include <linux/memblock.h>
 
@@ -128,6 +130,19 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
 };
 
+static const struct software_node spitz_scoop_1_gpiochip_node = {
+	.name = "sharp-scoop.0",
+};
+
+/* Only on Spitz */
+static const struct software_node spitz_scoop_2_gpiochip_node = {
+	.name = "sharp-scoop.1",
+};
+
+/* Only on Akita */
+static const struct software_node akita_max7310_gpiochip_node = {
+	.name = "i2c-max7310",
+};
 
 /******************************************************************************
  * Scoop GPIO expander
@@ -452,35 +467,64 @@ static inline void spitz_keys_init(void) {}
  * LEDs
  ******************************************************************************/
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led spitz_gpio_leds[] = {
-	{
-		.name			= "spitz:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= SPITZ_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "spitz:green:hddactivity",
-		.default_trigger	= "disk-activity",
-		.gpio			= SPITZ_GPIO_LED_GREEN,
-	},
+static const struct software_node spitz_gpio_leds_node = {
+	.name = "spitz-leds",
 };
 
-static struct gpio_led_platform_data spitz_gpio_leds_info = {
-	.leds		= spitz_gpio_leds,
-	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
+static const struct property_entry spitz_orange_led_props[] = {
+	PROPERTY_ENTRY_STRING("linux,default-trigger", "sharpsl-charge"),
+	PROPERTY_ENTRY_GPIO("gpios",
+			    &spitz_scoop_1_gpiochip_node, 6, GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct platform_device spitz_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &spitz_gpio_leds_info,
-	},
+static const struct software_node spitz_orange_led_node = {
+	.name = "spitz:amber:charge",
+	.parent = &spitz_gpio_leds_node,
+	.properties = spitz_orange_led_props,
+};
+
+static const struct property_entry spitz_green_led_props[] = {
+	PROPERTY_ENTRY_STRING("linux,default-trigger", "disk-activity"),
+	PROPERTY_ENTRY_GPIO("gpios",
+			    &spitz_scoop_1_gpiochip_node, 0, GPIO_ACTIVE_HIGH),
+	{ }
+};
+
+static const struct software_node spitz_green_led_node = {
+	.name = "spitz:green:hddactivity",
+	.parent = &spitz_gpio_leds_node,
+	.properties = spitz_green_led_props,
+};
+
+static const struct software_node *spitz_gpio_leds_swnodes[] = {
+	&spitz_gpio_leds_node,
+	&spitz_orange_led_node,
+	&spitz_green_led_node,
+	NULL
 };
 
 static void __init spitz_leds_init(void)
 {
-	platform_device_register(&spitz_led_device);
+	struct platform_device_info led_info = {
+		.name	= "leds-gpio",
+		.id	= PLATFORM_DEVID_NONE,
+	};
+	struct platform_device *led_dev;
+	int err;
+
+	err = software_node_register_node_group(spitz_gpio_leds_swnodes);
+	if (err) {
+		pr_err("failed to register LED software nodes: %d\n", err);
+		return;
+	}
+
+	led_info.fwnode = software_node_fwnode(&spitz_gpio_leds_node);
+
+	led_dev = platform_device_register_full(&led_info);
+	err = PTR_ERR_OR_ZERO(led_dev);
+	if (err)
+		pr_err("failed to create LED device: %d\n", err);
 }
 #else
 static inline void spitz_leds_init(void) {}
@@ -490,53 +534,43 @@ static inline void spitz_leds_init(void) {}
  * SSP Devices
  ******************************************************************************/
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static void spitz_ads7846_wait_for_hsync(void)
-{
-	while (gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
 
-	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-}
+static const struct property_entry spitz_ads7846_props[] = {
+	PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"),
+	PROPERTY_ENTRY_U32("touchscreen-max-pressure", 1024),
+	PROPERTY_ENTRY_U16("ti,x-plate-ohms", 419),
+	PROPERTY_ENTRY_U16("ti,y-plate-ohms", 486),
+	PROPERTY_ENTRY_U16("ti,vref-delay-usecs", 100),
+	PROPERTY_ENTRY_GPIO("pendown-gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_TP_INT, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_GPIO("ti,hsync-gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_HSYNC, GPIO_ACTIVE_LOW),
+	{ }
+};
 
-static struct ads7846_platform_data spitz_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1024,
-	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
+static const struct software_node spitz_ads7846_swnode = {
+	.name = "ads7846",
+	.properties = spitz_ads7846_props,
 };
 
-static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
-	.dev_id = "spi2.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT,
-			    "pendown", GPIO_ACTIVE_LOW),
-		{ }
-	},
+static const struct property_entry spitz_lcdcon_props[] = {
+	PROPERTY_ENTRY_GPIO("BL_CONT-gpios",
+			    &spitz_scoop_2_gpiochip_node, 6, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_GPIO("BL_ON-gpios",
+			    &spitz_scoop_2_gpiochip_node, 7, GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
-	.dev_id = "spi2.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry akita_lcdcon_props[] = {
+	PROPERTY_ENTRY_GPIO("BL_ON-gpios",
+			    &akita_max7310_gpiochip_node, 3, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("BL_CONT-gpios",
+			    &akita_max7310_gpiochip_node, 4, GPIO_ACTIVE_LOW),
+	{ }
 };
 
-static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
-	.dev_id = "spi2.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static struct software_node spitz_lcdcon_node = {
+	.name = "spitz-lcdcon",
 };
 
 static struct corgi_lcd_platform_data spitz_lcdcon_info = {
@@ -553,7 +587,7 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.max_speed_hz		= 1200000,
 		.bus_num		= 2,
 		.chip_select		= 0,
-		.platform_data		= &spitz_ads7846_info,
+		.swnode			= &spitz_ads7846_swnode,
 		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
 	}, {
 		.modalias		= "corgi-lcd",
@@ -561,6 +595,7 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.bus_num		= 2,
 		.chip_select		= 1,
 		.platform_data		= &spitz_lcdcon_info,
+		.swnode			= &spitz_lcdcon_node,
 	}, {
 		.modalias		= "max1111",
 		.max_speed_hz		= 450000,
@@ -569,53 +604,40 @@ static struct spi_board_info spitz_spi_devices[] = {
 	},
 };
 
-static struct gpiod_lookup_table spitz_spi_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
-		{ },
-	},
+static const struct software_node_ref_args spitz_spi_gpio_refs[] = {
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_ADS7846_CS,
+				GPIO_ACTIVE_LOW),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_LCDCON_CS,
+				GPIO_ACTIVE_LOW),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_MAX1111_CS,
+				GPIO_ACTIVE_LOW),
 };
 
 static const struct property_entry spitz_spi_properties[] = {
-	PROPERTY_ENTRY_U32("num-cs", 3),
+	PROPERTY_ENTRY_REF_ARRAY("gpios", spitz_spi_gpio_refs),
 	{ }
 };
 
-static const struct software_node spitz_spi_node = {
+static const struct platform_device_info spitz_spi_device_info = {
+	.name = "pxa2xx-spi",
+	/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1 */
+	.id = 2,
 	.properties = spitz_spi_properties,
 };
 
 static void __init spitz_spi_init(void)
 {
 	struct platform_device *pd;
-	int id = 2;
 	int err;
 
-	if (machine_is_akita())
-		gpiod_add_lookup_table(&akita_lcdcon_gpio_table);
-	else
-		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
-
-	gpiod_add_lookup_table(&spitz_ads7846_gpio_table);
-	gpiod_add_lookup_table(&spitz_spi_gpio_table);
-
-	/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1 */
-	pd = platform_device_alloc("pxa2xx-spi", id);
-	if (pd == NULL) {
-		pr_err("pxa2xx-spi: failed to allocate device id %d\n", id);
-	} else {
-		err = device_add_software_node(&pd->dev, &spitz_spi_node);
-		if (err) {
-			platform_device_put(pd);
-			pr_err("pxa2xx-spi: failed to add software node\n");
-		} else {
-			platform_device_add(pd);
-		}
-	}
+	pd = platform_device_register_full(&spitz_spi_device_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("pxa2xx-spi: failed to instantiate SPI controller: %d\n",
+		       err);
 
+	spitz_lcdcon_node.properties = machine_is_akita() ?
+					akita_lcdcon_props : spitz_lcdcon_props;
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }
 #else
@@ -648,21 +670,17 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
 	.setpower		= spitz_mci_setpower,
 };
 
-static struct gpiod_lookup_table spitz_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
+static const struct property_entry spitz_mci_props[] __initconst = {
+	PROPERTY_ENTRY_GPIO("cd-gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_nSD_DETECT, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_GPIO("wp-gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_nSD_WP, GPIO_ACTIVE_LOW),
+	{ }
 };
 
 static void __init spitz_mmc_init(void)
 {
-	gpiod_add_lookup_table(&spitz_mci_gpio_table);
-	pxa_set_mci_info(&spitz_mci_platform_data);
+	pxa_set_mci_info(&spitz_mci_platform_data, spitz_mci_props);
 }
 #else
 static inline void spitz_mmc_init(void) {}
@@ -961,30 +979,24 @@ static void __init spitz_i2c_init(void)
 static inline void spitz_i2c_init(void) {}
 #endif
 
-static struct gpiod_lookup_table spitz_audio_gpio_table = {
-	.dev_id = "spitz-audio",
-	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry spitz_audio_props[] = {
+	PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3,
+			    GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4,
+			    GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mic-gpios", &spitz_scoop_2_gpiochip_node, 8,
+			    GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct gpiod_lookup_table akita_audio_gpio_table = {
-	.dev_id = "spitz-audio",
-	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry akita_audio_props[] = {
+	PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3,
+			    GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4,
+			    GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mic-gpios", &akita_max7310_gpiochip_node, 2,
+			    GPIO_ACTIVE_HIGH),
+	{ }
 };
 
 /******************************************************************************
@@ -992,12 +1004,14 @@ static struct gpiod_lookup_table akita_audio_gpio_table = {
  ******************************************************************************/
 static inline void spitz_audio_init(void)
 {
-	if (machine_is_akita())
-		gpiod_add_lookup_table(&akita_audio_gpio_table);
-	else
-		gpiod_add_lookup_table(&spitz_audio_gpio_table);
-
-	platform_device_register_simple("spitz-audio", -1, NULL, 0);
+	struct platform_device_info audio_info = {
+		.name = "spitz-audio",
+		.id = PLATFORM_DEVID_NONE,
+		.properties = machine_is_akita() ?
+				akita_audio_props : spitz_audio_props,
+	};
+
+	platform_device_register_full(&audio_info);
 }
 
 /******************************************************************************
@@ -1020,6 +1034,12 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd)
 
 static void __init spitz_init(void)
 {
+	software_node_register(&spitz_scoop_1_gpiochip_node);
+	if (machine_is_akita())
+		software_node_register(&akita_max7310_gpiochip_node);
+	else
+		software_node_register(&spitz_scoop_2_gpiochip_node);
+
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 18d37f90cdfe..3ec810b6f1a7 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -8,35 +8,49 @@
  * Copyright (C) 2010 Google, Inc.
  */
 
-#include <linux/property.h>
+#include <linux/err.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/property.h>
 
 #include "board.h"
 
-static struct property_entry wifi_rfkill_prop[] __initdata = {
-	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
-	PROPERTY_ENTRY_STRING("type", "wlan"),
-	{ },
+static const struct software_node tegra_gpiochip_node = {
+	.name	= "tegra-gpio",
 };
 
-static struct platform_device wifi_rfkill_device = {
-	.name	= "rfkill_gpio",
-	.id	= -1,
+static const struct property_entry wifi_rfkill_prop[] __initconst = {
+	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
+	PROPERTY_ENTRY_STRING("type", "wlan"),
+	PROPERTY_ENTRY_GPIO("reset-gpios",
+			    &tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("shutdown-gpios",
+			    &tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct gpiod_lookup_table wifi_gpio_lookup = {
-	.dev_id = "rfkill_gpio",
-	.table = {
-		GPIO_LOOKUP("tegra-gpio", 25, "reset", 0),
-		GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0),
-		{ },
-	},
+static const struct platform_device_info wifi_rfkill_info __initconst = {
+	.name		= "rfkill_gpio",
+	.id		= PLATFORM_DEVID_NONE,
+	.properties	= wifi_rfkill_prop,
 };
 
 void __init tegra_paz00_wifikill_init(void)
 {
-	device_create_managed_software_node(&wifi_rfkill_device.dev, wifi_rfkill_prop, NULL);
-	gpiod_add_lookup_table(&wifi_gpio_lookup);
-	platform_device_register(&wifi_rfkill_device);
+	struct platform_device *pd;
+	int err;
+
+	err = software_node_register(&tegra_gpiochip_node);
+	if (err) {
+		pr_err("failed to register %s node: %d\n",
+		       tegra_gpiochip_node.name, err);
+		return;
+	}
+
+	pd = platform_device_register_full(&wifi_rfkill_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("failed to register WiFi rfkill device: %d\n", err);
 }
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index e029270c2687..513618078440 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -278,15 +278,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
 	  build a working kernel, you must also enable relevant core
 	  tile support or Flattened Device Tree based support options.
 
-config ARCH_VEXPRESS_DCSCB
-	bool "Dual Cluster System Control Block (DCSCB) support"
-	depends on MCPM
-	select ARM_CCI400_PORT_CTRL
-	help
-	  Support for the Dual Cluster System Configuration Block (DCSCB).
-	  This is needed to provide CPU and cluster power management
-	  on RTSM implementing big.LITTLE.
-
 config ARCH_VEXPRESS_SPC
 	bool "Versatile Express Serial Power Controller (SPC)"
 	select PM_OPP
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 27d712bcf1af..d819fb2fc450 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -16,9 +16,6 @@ obj-$(CONFIG_ARCH_REALVIEW)		+= realview.o
 
 # vexpress
 obj-$(CONFIG_ARCH_VEXPRESS)		:= v2m.o
-obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
-CFLAGS_dcscb.o				+= -march=armv7-a
-CFLAGS_REMOVE_dcscb.o			= -pg
 obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
 CFLAGS_REMOVE_spc.o			= -pg
 obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
diff --git a/arch/arm/mach-versatile/dcscb.c b/arch/arm/mach-versatile/dcscb.c
deleted file mode 100644
index d8797350996d..000000000000
--- a/arch/arm/mach-versatile/dcscb.c
+++ /dev/null
@@ -1,173 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * dcscb.c - Dual Cluster System Configuration Block
- *
- * Created by:	Nicolas Pitre, May 2012
- * Copyright:	(C) 2012-2013  Linaro Limited
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/of_address.h>
-#include <linux/vexpress.h>
-#include <linux/arm-cci.h>
-
-#include <asm/mcpm.h>
-#include <asm/proc-fns.h>
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/cp15.h>
-
-#include "vexpress.h"
-
-#define RST_HOLD0	0x0
-#define RST_HOLD1	0x4
-#define SYS_SWRESET	0x8
-#define RST_STAT0	0xc
-#define RST_STAT1	0x10
-#define EAG_CFG_R	0x20
-#define EAG_CFG_W	0x24
-#define KFC_CFG_R	0x28
-#define KFC_CFG_W	0x2c
-#define DCS_CFG_R	0x30
-
-static void __iomem *dcscb_base;
-static int dcscb_allcpus_mask[2];
-
-static int dcscb_cpu_powerup(unsigned int cpu, unsigned int cluster)
-{
-	unsigned int rst_hold, cpumask = (1 << cpu);
-
-	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
-	if (cluster >= 2 || !(cpumask & dcscb_allcpus_mask[cluster]))
-		return -EINVAL;
-
-	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
-	rst_hold &= ~(cpumask | (cpumask << 4));
-	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
-	return 0;
-}
-
-static int dcscb_cluster_powerup(unsigned int cluster)
-{
-	unsigned int rst_hold;
-
-	pr_debug("%s: cluster %u\n", __func__, cluster);
-	if (cluster >= 2)
-		return -EINVAL;
-
-	/* remove cluster reset and add individual CPU's reset */
-	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
-	rst_hold &= ~(1 << 8);
-	rst_hold |= dcscb_allcpus_mask[cluster];
-	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
-	return 0;
-}
-
-static void dcscb_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
-{
-	unsigned int rst_hold;
-
-	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
-	BUG_ON(cluster >= 2 || !((1 << cpu) & dcscb_allcpus_mask[cluster]));
-
-	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
-	rst_hold |= (1 << cpu);
-	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
-}
-
-static void dcscb_cluster_powerdown_prepare(unsigned int cluster)
-{
-	unsigned int rst_hold;
-
-	pr_debug("%s: cluster %u\n", __func__, cluster);
-	BUG_ON(cluster >= 2);
-
-	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
-	rst_hold |= (1 << 8);
-	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
-}
-
-static void dcscb_cpu_cache_disable(void)
-{
-	/* Disable and flush the local CPU cache. */
-	v7_exit_coherency_flush(louis);
-}
-
-static void dcscb_cluster_cache_disable(void)
-{
-	/* Flush all cache levels for this cluster. */
-	v7_exit_coherency_flush(all);
-
-	/*
-	 * A full outer cache flush could be needed at this point
-	 * on platforms with such a cache, depending on where the
-	 * outer cache sits. In some cases the notion of a "last
-	 * cluster standing" would need to be implemented if the
-	 * outer cache is shared across clusters. In any case, when
-	 * the outer cache needs flushing, there is no concurrent
-	 * access to the cache controller to worry about and no
-	 * special locking besides what is already provided by the
-	 * MCPM state machinery is needed.
-	 */
-
-	/*
-	 * Disable cluster-level coherency by masking
-	 * incoming snoops and DVM messages:
-	 */
-	cci_disable_port_by_cpu(read_cpuid_mpidr());
-}
-
-static const struct mcpm_platform_ops dcscb_power_ops = {
-	.cpu_powerup		= dcscb_cpu_powerup,
-	.cluster_powerup	= dcscb_cluster_powerup,
-	.cpu_powerdown_prepare	= dcscb_cpu_powerdown_prepare,
-	.cluster_powerdown_prepare = dcscb_cluster_powerdown_prepare,
-	.cpu_cache_disable	= dcscb_cpu_cache_disable,
-	.cluster_cache_disable	= dcscb_cluster_cache_disable,
-};
-
-extern void dcscb_power_up_setup(unsigned int affinity_level);
-
-static int __init dcscb_init(void)
-{
-	struct device_node *node;
-	unsigned int cfg;
-	int ret;
-
-	if (!cci_probed())
-		return -ENODEV;
-
-	node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb");
-	if (!node)
-		return -ENODEV;
-	dcscb_base = of_iomap(node, 0);
-	of_node_put(node);
-	if (!dcscb_base)
-		return -EADDRNOTAVAIL;
-	cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
-	dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1;
-	dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1;
-
-	ret = mcpm_platform_register(&dcscb_power_ops);
-	if (!ret)
-		ret = mcpm_sync_init(dcscb_power_up_setup);
-	if (ret) {
-		iounmap(dcscb_base);
-		return ret;
-	}
-
-	pr_info("VExpress DCSCB support installed\n");
-
-	/*
-	 * Future entries into the kernel can now go
-	 * through the cluster entry vectors.
-	 */
-	vexpress_flags_set(__pa_symbol(mcpm_entry_point));
-
-	return 0;
-}
-
-early_initcall(dcscb_init);
diff --git a/arch/arm/mach-versatile/dcscb_setup.S b/arch/arm/mach-versatile/dcscb_setup.S
deleted file mode 100644
index 92d1fd9d7f6a..000000000000
--- a/arch/arm/mach-versatile/dcscb_setup.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Created by:  Dave Martin, 2012-06-22
- * Copyright:   (C) 2012-2013  Linaro Limited
- */
-
-#include <linux/linkage.h>
-
-
-ENTRY(dcscb_power_up_setup)
-
-	cmp	r0, #0			@ check affinity level
-	beq	2f
-
-/*
- * Enable cluster-level coherency, in preparation for turning on the MMU.
- * The ACTLR SMP bit does not need to be set here, because cpu_resume()
- * already restores that.
- *
- * A15/A7 may not require explicit L2 invalidation on reset, dependent
- * on hardware integration decisions.
- * For now, this code assumes that L2 is either already invalidated,
- * or invalidation is not required.
- */
-
-	b	cci_enable_port_for_self
-
-2:	@ Implementation-specific local CPU setup operations should go here,
-	@ if any.  In this case, there is nothing to do.
-
-	bx	lr
-
-ENDPROC(dcscb_power_up_setup)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 3738a9fc2d6c..d1461335e78f 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -207,7 +207,6 @@ if ARCH_NXP
 
 config ARCH_LAYERSCAPE
 	bool "Freescale Layerscape SoC family"
-	select EDAC_SUPPORT
 	help
 	  This enables support for the Freescale Layerscape SoC family.
 
diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c
index d2c7ada90186..64ee920721ee 100644
--- a/drivers/bus/vexpress-config.c
+++ b/drivers/bus/vexpress-config.c
@@ -414,4 +414,5 @@ static struct platform_driver vexpress_syscfg_driver = {
 	.probe = vexpress_syscfg_probe,
 };
 module_platform_driver(vexpress_syscfg_driver);
+MODULE_DESCRIPTION("Versatile Express configuration bus");
 MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h
index 7e44e84e7150..652f323b5ecc 100644
--- a/include/linux/platform_data/mmc-pxamci.h
+++ b/include/linux/platform_data/mmc-pxamci.h
@@ -7,6 +7,7 @@
 
 struct device;
 struct mmc_host;
+struct property_entry;
 
 struct pxamci_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
@@ -18,7 +19,8 @@ struct pxamci_platform_data {
 	bool gpio_card_ro_invert;		/* gpio ro is inverted */
 };
 
-extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa_set_mci_info(const struct pxamci_platform_data *info,
+			     const struct property_entry *props);
 extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
 extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);