diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-03-08 09:27:33 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-03-08 09:27:33 -0800 |
| commit | 6c3f98faddc7f07981c5365ba2f45905ad75fcaa (patch) | |
| tree | a999723d659850bd26dd95f05c5c9b12289ca91c | |
| parent | 1cabd3e0bd88d7ba9854cbb9213ef40eccad603b (diff) | |
| parent | 93b6604c5a669d84e45fe5129294875bf82eb1ff (diff) | |
Merge branch 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- the I2C core gained helpers to assist drivers in handling their
suspended state, and drivers were converted to use it
- two new fault-injectors for stress-testing
- bigger refactoring and feature improvements for the ocores,
sh_mobile, and tegra drivers
- platform_data removal for the at24 EEPROM driver
- ... and various improvements and bugfixes all over the subsystem
* 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: Allow recovery of the initial IRQ by an I2C client device.
i2c: ocores: turn incomplete kdoc into a comment
i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
i2c: tegra: Only display error messages if DMA setup fails
i2c: gpio: fault-injector: add 'inject_panic' injector
i2c: gpio: fault-injector: add 'lose_arbitration' injector
i2c: tegra: remove multi-master support
i2c: tegra: remove master fifo support on tegra186
i2c: tegra: change phrasing, "fallbacking" to "falling back"
i2c: expand minor range when registering chrdev region
i2c: aspeed: Add multi-master use case support
i2c: core-smbus: don't trace smbus_reply data on errors
i2c: ocores: Add support for bus clock via platform data
i2c: ocores: Add support for IO mapper registers.
i2c: ocores: checkpatch fixes
i2c: ocores: add SPDX tag
i2c: ocores: add polling interface
i2c: ocores: do not handle IRQ if IF is not set
i2c: ocores: stop transfer on timeout
i2c: tegra: add i2c interface timing support
...
40 files changed, 1560 insertions, 660 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt index f9a7c984274c..0e456bbc1213 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.txt +++ b/Documentation/devicetree/bindings/eeprom/at24.txt @@ -75,6 +75,8 @@ Optional properties: - address-width: number of address bits (one of 8, 16). + - num-addresses: total number of i2c slave addresses this device takes + Example: eeprom@52 { @@ -82,4 +84,5 @@ eeprom@52 { reg = <0x52>; pagesize = <32>; wp-gpios = <&gpio1 3 0>; + num-addresses = <8>; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt index e199695b1c96..ee4c32454198 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt @@ -10,6 +10,7 @@ Required properties: "mediatek,mt6589-i2c": for MediaTek MT6589 "mediatek,mt7622-i2c": for MediaTek MT7622 "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623 + "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 "mediatek,mt8173-i2c": for MediaTek MT8173 - reg: physical base address of the controller and dma base, length of memory mapped region. diff --git a/Documentation/devicetree/bindings/i2c/i2c-xscale.txt b/Documentation/devicetree/bindings/i2c/i2c-xscale.txt new file mode 100644 index 000000000000..dcc8390e0d24 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-xscale.txt @@ -0,0 +1,20 @@ +i2c Controller on XScale platforms such as IOP3xx and IXP4xx + +Required properties: +- compatible : Must be one of + "intel,iop3xx-i2c" + "intel,ixp4xx-i2c"; +- reg +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + +i2c@c8011000 { + compatible = "intel,ixp4xx-i2c"; + reg = <0xc8011000 0x18>; + interrupts = <33 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Documentation/i2c/fault-codes b/Documentation/i2c/fault-codes index 47c25abb7d52..0cee0fc545b4 100644 --- a/Documentation/i2c/fault-codes +++ b/Documentation/i2c/fault-codes @@ -112,6 +112,10 @@ EPROTO case is when the length of an SMBus block data response (from the SMBus slave) is outside the range 1-32 bytes. +ESHUTDOWN + Returned when a transfer was requested using an adapter + which is already suspended. + ETIMEDOUT This is returned by drivers when an operation took too much time, and was aborted before it completed. diff --git a/Documentation/i2c/gpio-fault-injection b/Documentation/i2c/gpio-fault-injection index a4ce62090fd5..c87f416d53dd 100644 --- a/Documentation/i2c/gpio-fault-injection +++ b/Documentation/i2c/gpio-fault-injection @@ -1,3 +1,4 @@ +========================= Linux I2C fault injection ========================= @@ -13,6 +14,9 @@ mounted at /sys/kernel/debug. There will be a separate subdirectory per GPIO driven I2C bus. Each subdirectory will contain files to trigger the fault injection. They will be described now along with their intended use-cases. +Wire states +=========== + "scl" ----- @@ -34,10 +38,10 @@ I2C specification version 4, section 3.1.16) using the helpers of the Linux I2C core (see 'struct bus_recovery_info'). However, the bus recovery will not succeed because SDA is still pinned low until you manually release it again with "echo 1 > sda". A test with an automatic release can be done with the -following class of fault injectors. +"incomplete transfers" class of fault injectors. -Introduction to incomplete transfers ------------------------------------- +Incomplete transfers +==================== The following fault injectors create situations where SDA will be held low by a device. Bus recovery should be able to fix these situations. But please note: @@ -79,3 +83,54 @@ This is why bus recovery (up to 9 clock pulses) must either check SDA or send additional STOP conditions to ensure the bus has been released. Otherwise random data will be written to a device! +Lost arbitration +================ + +Here, we want to simulate the condition where the master under test loses the +bus arbitration against another master in a multi-master setup. + +"lose_arbitration" +------------------ + +This file is write only and you need to write the duration of the arbitration +intereference (in µs, maximum is 100ms). The calling process will then sleep +and wait for the next bus clock. The process is interruptible, though. + +Arbitration lost is achieved by waiting for SCL going down by the master under +test and then pulling SDA low for some time. So, the I2C address sent out +should be corrupted and that should be detected properly. That means that the +address sent out should have a lot of '1' bits to be able to detect corruption. +There doesn't need to be a device at this address because arbitration lost +should be detected beforehand. Also note, that SCL going down is monitored +using interrupts, so the interrupt latency might cause the first bits to be not +corrupted. A good starting point for using this fault injector on an otherwise +idle bus is: + +# echo 200 > lose_arbitration & +# i2cget -y <bus_to_test> 0x3f + +Panic during transfer +===================== + +This fault injector will create a Kernel panic once the master under test +started a transfer. This usually means that the state machine of the bus master +driver will be ungracefully interrupted and the bus may end up in an unusual +state. Use this to check if your shutdown/reboot/boot code can handle this +scenario. + +"inject_panic" +-------------- + +This file is write only and you need to write the delay between the detected +start of a transmission and the induced Kernel panic (in µs, maximum is 100ms). +The calling process will then sleep and wait for the next bus clock. The +process is interruptible, though. + +Start of a transfer is detected by waiting for SCL going down by the master +under test. A good starting point for using this fault injector is: + +# echo 0 > inject_panic & +# i2cget -y <bus_to_test> <some_address> + +Note that there doesn't need to be a device listening to the address you are +using. Results may vary depending on that, though. diff --git a/MAINTAINERS b/MAINTAINERS index 58de951ee4ba..a5f9d5759604 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2554,7 +2554,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git S: Maintained F: Documentation/devicetree/bindings/eeprom/at24.txt F: drivers/misc/eeprom/at24.c -F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" <ed.cashin@acm.org> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index eb41db78cd47..10848f573d37 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -10,6 +10,7 @@ #include <linux/clkdev.h> #include <linux/irq.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mutex.h> @@ -25,7 +26,6 @@ #include <linux/platform_data/keypad-omap.h> #include <linux/platform_data/lcd-mipid.h> #include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/i2c-cbus-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -217,18 +217,19 @@ static inline void nokia770_mmc_init(void) #endif #if IS_ENABLED(CONFIG_I2C_CBUS_GPIO) -static struct i2c_cbus_platform_data nokia770_cbus_data = { - .clk_gpio = OMAP_MPUIO(9), - .dat_gpio = OMAP_MPUIO(10), - .sel_gpio = OMAP_MPUIO(11), +static struct gpiod_lookup_table nokia770_cbus_gpio_table = { + .dev_id = "i2c-cbus-gpio.2", + .table = { + GPIO_LOOKUP_IDX("mpuio", 9, NULL, 0, 0), /* clk */ + GPIO_LOOKUP_IDX("mpuio", 10, NULL, 1, 0), /* dat */ + GPIO_LOOKUP_IDX("mpuio", 11, NULL, 2, 0), /* sel */ + { }, + }, }; static struct platform_device nokia770_cbus_device = { .name = "i2c-cbus-gpio", .id = 2, - .dev = { - .platform_data = &nokia770_cbus_data, - }, }; static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { @@ -257,6 +258,7 @@ static void __init nokia770_cbus_init(void) nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio); i2c_register_board_info(2, nokia770_i2c_board_info_2, ARRAY_SIZE(nokia770_i2c_board_info_2)); + gpiod_add_lookup_table(&nokia770_cbus_gpio_table); platform_device_register(&nokia770_cbus_device); } #else /* CONFIG_I2C_CBUS_GPIO */ diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index c33dcfb87993..5e5990a83da5 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -1,21 +1,12 @@ -/* ------------------------------------------------------------------------- - * i2c-algo-bit.c i2c driver algorithms for bit-shift adapters - * ------------------------------------------------------------------------- +// SPDX-License-Identifier: GPL-2.0+ +/* + * i2c-algo-bit.c: i2c driver algorithms for bit-shift adapters + * * Copyright (C) 1995-2000 Simon G. Vogl - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - * ------------------------------------------------------------------------- */ - -/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki - <kmalkki@cc.hut.fi> and Jean Delvare <jdelvare@suse.de> */ + * + * With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki + * <kmalkki@cc.hut.fi> and Jean Delvare <jdelvare@suse.de> + */ #include <linux/kernel.h> #include <linux/module.h> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 8dc9161ced38..6c8b38fd6e64 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -117,6 +117,7 @@ enum aspeed_i2c_master_state { ASPEED_I2C_MASTER_INACTIVE, + ASPEED_I2C_MASTER_PENDING, ASPEED_I2C_MASTER_START, ASPEED_I2C_MASTER_TX_FIRST, ASPEED_I2C_MASTER_TX, @@ -126,12 +127,13 @@ enum aspeed_i2c_master_state { }; enum aspeed_i2c_slave_state { - ASPEED_I2C_SLAVE_STOP, + ASPEED_I2C_SLAVE_INACTIVE, ASPEED_I2C_SLAVE_START, ASPEED_I2C_SLAVE_READ_REQUESTED, ASPEED_I2C_SLAVE_READ_PROCESSED, ASPEED_I2C_SLAVE_WRITE_REQUESTED, ASPEED_I2C_SLAVE_WRITE_RECEIVED, + ASPEED_I2C_SLAVE_STOP, }; struct aspeed_i2c_bus { @@ -156,6 +158,8 @@ struct aspeed_i2c_bus { int cmd_err; /* Protected only by i2c_lock_bus */ int master_xfer_result; + /* Multi-master */ + bool multi_master; #if IS_ENABLED(CONFIG_I2C_SLAVE) struct i2c_client *slave; enum aspeed_i2c_slave_state slave_state; @@ -251,7 +255,7 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) } /* Slave is not currently active, irq was for someone else. */ - if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) + if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) return irq_handled; dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n", @@ -277,16 +281,15 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP; bus->slave_state = ASPEED_I2C_SLAVE_STOP; } - if (irq_status & ASPEED_I2CD_INTR_TX_NAK) { + if (irq_status & ASPEED_I2CD_INTR_TX_NAK && + bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) { irq_handled |= ASPEED_I2CD_INTR_TX_NAK; bus->slave_state = ASPEED_I2C_SLAVE_STOP; } - if (irq_status & ASPEED_I2CD_INTR_TX_ACK) - irq_handled |= ASPEED_I2CD_INTR_TX_ACK; switch (bus->slave_state) { case ASPEED_I2C_SLAVE_READ_REQUESTED: - if (irq_status & ASPEED_I2CD_INTR_TX_ACK) + if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK)) dev_err(bus->dev, "Unexpected ACK on read request.\n"); bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED; i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value); @@ -294,9 +297,12 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); break; case ASPEED_I2C_SLAVE_READ_PROCESSED: - if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK)) + if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { dev_err(bus->dev, "Expected ACK after processed read.\n"); + break; + } + irq_handled |= ASPEED_I2CD_INTR_TX_ACK; i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value); writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); @@ -310,10 +316,15 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) break; case ASPEED_I2C_SLAVE_STOP: i2c_slave_event(slave, I2C_SLAVE_STOP, &value); + bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; + break; + case ASPEED_I2C_SLAVE_START: + /* Slave was just started. Waiting for the next event. */; break; default: - dev_err(bus->dev, "unhandled slave_state: %d\n", + dev_err(bus->dev, "unknown slave_state: %d\n", bus->slave_state); + bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; break; } @@ -329,6 +340,17 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) u8 slave_addr = i2c_8bit_addr_from_msg(msg); bus->master_state = ASPEED_I2C_MASTER_START; + +#if IS_ENABLED(CONFIG_I2C_SLAVE) + /* + * If it's requested in the middle of a slave session, set the master + * state to 'pending' then H/W will continue handling this master + * command when the bus comes back to the idle state. + */ + if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) + bus->master_state = ASPEED_I2C_MASTER_PENDING; +#endif /* CONFIG_I2C_SLAVE */ + bus->buf_index = 0; if (msg->flags & I2C_M_RD) { @@ -384,10 +406,6 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) bus->master_state = ASPEED_I2C_MASTER_INACTIVE; irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE; goto out_complete; - } else { - /* Master is not currently active, irq was for someone else. */ - if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE) - goto out_no_complete; } /* @@ -399,11 +417,32 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) if (ret) { dev_dbg(bus->dev, "received error interrupt: 0x%08x\n", irq_status); - bus->cmd_err = ret; - bus->master_state = ASPEED_I2C_MASTER_INACTIVE; irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS); - goto out_complete; + if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) { + bus->cmd_err = ret; + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + goto out_complete; + } + } + +#if IS_ENABLED(CONFIG_I2C_SLAVE) + /* + * A pending master command will be started by H/W when the bus comes + * back to idle state after completing a slave operation so change the + * master state from 'pending' to 'start' at here if slave is inactive. + */ + if (bus->master_state == ASPEED_I2C_MASTER_PENDING) { + if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) + goto out_no_complete; + + bus->master_state = ASPEED_I2C_MASTER_START; } +#endif /* CONFIG_I2C_SLAVE */ + + /* Master is not currently active, irq was for someone else. */ + if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE || + bus->master_state == ASPEED_I2C_MASTER_PENDING) + goto out_no_complete; /* We are in an invalid state; reset bus to a known state. */ if (!bus->msgs) { @@ -423,6 +462,20 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) * then update the state and handle the new state below. */ if (bus->master_state == ASPEED_I2C_MASTER_START) { +#if IS_ENABLED(CONFIG_I2C_SLAVE) + /* + * If a peer master starts a xfer immediately after it queues a + * master command, change its state to 'pending' then H/W will + * continue the queued master xfer just after completing the + * slave mode session. + */ + if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) { + bus->master_state = ASPEED_I2C_MASTER_PENDING; + dev_dbg(bus->dev, + "master goes pending due to a slave start\n"); + goto out_no_complete; + } +#endif /* CONFIG_I2C_SLAVE */ if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) { bus->cmd_err = -ENXIO; @@ -566,7 +619,8 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) * interrupt bits. Each case needs to be handled using corresponding * handlers depending on the current state. */ - if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) { + if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE && + bus->master_state != ASPEED_I2C_MASTER_PENDING) { irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); irq_remaining &= ~irq_handled; if (irq_remaining) @@ -601,15 +655,16 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, { struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap); unsigned long time_left, flags; - int ret = 0; spin_lock_irqsave(&bus->lock, flags); bus->cmd_err = 0; - /* If bus is busy, attempt recovery. We assume a single master - * environment. - */ - if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) { + /* If bus is busy in a single master environment, attempt recovery. */ + if (!bus->multi_master && + (readl(bus->base + ASPEED_I2C_CMD_REG) & + ASPEED_I2CD_BUS_BUSY_STS)) { + int ret; + spin_unlock_irqrestore(&bus->lock, flags); ret = aspeed_i2c_recover_bus(bus); if (ret) @@ -629,10 +684,20 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, time_left = wait_for_completion_timeout(&bus->cmd_complete, bus->adap.timeout); - if (time_left == 0) + if (time_left == 0) { + /* + * If timed out and bus is still busy in a multi master + * environment, attempt recovery at here. + */ + if (bus->multi_master && + (readl(bus->base + ASPEED_I2C_CMD_REG) & + ASPEED_I2CD_BUS_BUSY_STS)) + aspeed_i2c_recover_bus(bus); + return -ETIMEDOUT; - else - return bus->master_xfer_result; + } + + return bus->master_xfer_result; } static u32 aspeed_i2c_functionality(struct i2c_adapter *adap) @@ -672,7 +737,7 @@ static int aspeed_i2c_reg_slave(struct i2c_client *client) __aspeed_i2c_reg_slave(bus, client->addr); bus->slave = client; - bus->slave_state = ASPEED_I2C_SLAVE_STOP; + bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; spin_unlock_irqrestore(&bus->lock, flags); return 0; @@ -827,7 +892,9 @@ static int aspeed_i2c_init(struct aspeed_i2c_bus *bus, if (ret < 0) return ret; - if (!of_property_read_bool(pdev->dev.of_node, "multi-master")) + if (of_property_read_bool(pdev->dev.of_node, "multi-master")) + bus->multi_master = true; + else fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS; /* Enable Master Mode */ @@ -930,7 +997,6 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) init_completion(&bus->cmd_complete); bus->adap.owner = THIS_MODULE; bus->adap.retries = 0; - bus->adap.timeout = 5 * HZ; bus->adap.algo = &aspeed_i2c_algo; bus->adap.dev.parent = &pdev->dev; bus->adap.dev.of_node = pdev->dev.of_node; diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 826d32049996..f4d862234980 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -170,7 +170,6 @@ struct brcmstb_i2c_dev { struct bsc_regs *bsc_regmap; struct i2c_adapter adapter; struct completion done; - bool is_suspended; u32 clk_freq_hz; int data_regsz; }; @@ -467,9 +466,6 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, int xfersz = brcmstb_i2c_get_xfersz(dev); u32 cond, cond_per_msg; - if (dev->is_suspended) - return -EBUSY; - /* Loop through all messages */ for (i = 0; i < num; i++) { pmsg = &msgs[i]; @@ -689,10 +685,7 @@ static int brcmstb_i2c_suspend(struct device *dev) { struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev); - i2c_lock_bus(&i2c_dev->adapter, I2C_LOCK_ROOT_ADAPTER); - i2c_dev->is_suspended = true; - i2c_unlock_bus(&i2c_dev->adapter, I2C_LOCK_ROOT_ADAPTER); - + i2c_mark_adapter_suspended(&i2c_dev->adapter); return 0; } @@ -700,10 +693,8 @@ static int brcmstb_i2c_resume(struct device *dev) { struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev); - i2c_lock_bus(&i2c_dev->adapter, I2C_LOCK_ROOT_ADAPTER); brcmstb_i2c_set_bsc_reg_defaults(i2c_dev); - i2c_dev->is_suspended = false; - i2c_unlock_bus(&i2c_dev->adapter, I2C_LOCK_ROOT_ADAPTER); + i2c_mark_adapter_resumed(&i2c_dev->adapter); return 0; } diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c index b4f91e48948a..72df563477b1 100644 --- a/drivers/i2c/busses/i2c-cbus-gpio.c +++ b/drivers/i2c/busses/i2c-cbus-gpio.c @@ -18,16 +18,14 @@ #include <linux/io.h> #include <linux/i2c.h> -#include <linux/gpio.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_gpio.h> +#include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <linux/platform_data/i2c-cbus-gpio.h> /* * Bit counts are derived from Nokia implementation. These should be checked @@ -39,9 +37,9 @@ struct cbus_host { spinlock_t lock; /* host lock */ struct device *dev; - int clk_gpio; - int dat_gpio; - int sel_gpio; + struct gpio_desc *clk; + struct gpio_desc *dat; + struct gpio_desc *sel; }; /** @@ -51,9 +49,9 @@ struct cbus_host { */ static void cbus_send_bit(struct cbus_host *host, unsigned bit) { - gpio_set_value(host->dat_gpio, bit ? 1 : 0); - gpio_set_value(host->clk_gpio, 1); - gpio_set_value(host->clk_gpio, 0); + gpiod_set_value(host->dat, bit ? 1 : 0); + gpiod_set_value(host->clk, 1); + gpiod_set_value(host->clk, 0); } /** @@ -78,9 +76,9 @@ static int cbus_receive_bit(struct cbus_host *host) { int ret; - gpio_set_value(host->clk_gpio, 1); - ret = gpio_get_value(host->dat_gpio); - gpio_set_value(host->clk_gpio, 0); + gpiod_set_value(host->clk, 1); + ret = gpiod_get_value(host->dat); + gpiod_set_value(host->clk, 0); return ret; } @@ -123,10 +121,10 @@ static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev, spin_lock_irqsave(&host->lock, flags); /* Reset state and start of transfer, SEL stays down during transfer */ - gpio_set_value(host->sel_gpio, 0); + gpiod_set_value(host->sel, 0); /* Set the DAT pin to output */ - gpio_direction_output(host->dat_gpio, 1); + gpiod_direction_output(host->dat, 1); /* Send the device address */ cbus_send_data(host, dev, CBUS_ADDR_BITS); @@ -141,12 +139,12 @@ static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev, cbus_send_data(host, data, 16); ret = 0; } else { - ret = gpio_direction_input(host->dat_gpio); + ret = gpiod_direction_input(host->dat); if (ret) { dev_dbg(host->dev, "failed setting direction\n"); goto out; } - gpio_set_value(host->clk_gpio, 1); + gpiod_set_value(host->clk, 1); ret = cbus_receive_word(host); if (ret < 0) { @@ -156,9 +154,9 @@ static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev, } /* Indicate end of transfer, SEL goes up until next transfer */ - gpio_set_value(host->sel_gpio, 1); - gpio_set_value(host->clk_gpio, 1); - gpio_set_value(host->clk_gpio, 0); + gpiod_set_value(host->sel, 1); + gpiod_set_value(host->clk, 1); + gpiod_set_value(host->clk, 0); out: spin_unlock_irqrestore(&host->lock, flags); @@ -214,7 +212,6 @@ static int cbus_i2c_probe(struct platform_device *pdev) { struct i2c_adapter *adapter; struct cbus_host *chost; - int ret; adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL); @@ -225,22 +222,20 @@ static int cbus_i2c_probe(struct platform_device *pdev) if (!chost) return -ENOMEM; - if (pdev->dev.of_node) { - struct device_node *dnode = pdev->dev.of_node; - if (of_gpio_count(dnode) != 3) - return -ENODEV; - chost->clk_gpio = of_get_gpio(dnode, 0); - chost->dat_gpio = of_get_gpio(dnode, 1); - chost->sel_gpio = of_get_gpio(dnode, 2); - } else if (dev_get_platdata(&pdev->dev)) { - struct i2c_cbus_platform_data *pdata = - dev_get_platdata(&pdev->dev); - chost->clk_gpio = pdata->clk_gpio; - chost->dat_gpio = pdata->dat_gpio; - chost->sel_gpio = pdata->sel_gpio; - } else { + if (gpiod_count(&pdev->dev, NULL) != 3) return -ENODEV; - } + chost->clk = devm_gpiod_get_index(&pdev->dev, NULL, 0, GPIOD_OUT_LOW); + if (IS_ERR(chost->clk)) + return PTR_ERR(chost->clk); + chost->dat = devm_gpiod_get_index(&pdev->dev, NULL, 1, GPIOD_IN); + if (IS_ERR(chost->dat)) + return PTR_ERR(chost->dat); + chost->sel = devm_gpiod_get_index(&pdev->dev, NULL, 2, GPIOD_OUT_HIGH); + if (IS_ERR(chost->sel)) + return PTR_ERR(chost->sel); + gpiod_set_consumer_name(chost->clk, "CBUS clk"); + gpiod_set_consumer_name(chost->dat, "CBUS dat"); + gpiod_set_consumer_name(chost->sel, "CBUS sel"); adapter->owner = THIS_MODULE; adapter->class = I2C_CLASS_HWMON; @@ -254,21 +249,6 @@ static int cbus_i2c_probe(struct platform_device *pdev) spin_lock_init(&chost->lock); chost->dev = &pdev->dev; - ret = devm_gpio_request_one(&pdev->dev, chost->clk_gpio, - GPIOF_OUT_INIT_LOW, "CBUS clk"); - if (ret) - return ret; - - ret = devm_gpio_request_one(&pdev->dev, chost->dat_gpio, GPIOF_IN, - "CBUS data"); - if (ret) - return ret; - - ret = devm_gpio_request_one(&pdev->dev, chost->sel_gpio, - GPIOF_OUT_INIT_HIGH, "CBUS sel"); - if (ret) - return ret; - i2c_set_adapdata(adapter, chost); platform_set_drvdata(pdev, adapter); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index b4a0b2b99a78..6b4ef1d38fb2 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -215,6 +215,7 @@ * @disable_int: function to disable all interrupts * @init: function to initialize the I2C hardware * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE + * @suspended: set to true if the controller is suspended * * HCNT and LCNT parameters can be used if the platform knows more accurate * values than the one computed based only on the input clock frequency. @@ -270,6 +271,7 @@ struct dw_i2c_dev { int (*set_sda_hold_time)(struct dw_i2c_dev *dev); int mode; struct i2c_bus_recovery_info rinfo; + bool suspended; }; #define ACCESS_SWAP 0x00000001 diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 8d1bc44d2530..bb8e3f149979 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -426,6 +426,12 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) pm_runtime_get_sync(dev->dev); + if (dev->suspended) { + dev_err(dev->dev, "Error %s call while suspended\n", __func__); + ret = -ESHUTDOWN; + goto done_nolock; + } + reinit_completion(&dev->cmd_complete); dev->msgs = msgs; dev->msgs_num = num; diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index d50f80487214..76810deb2de6 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -176,6 +176,7 @@ static int i2c_dw_pci_suspend(struct device *dev) struct pci_dev *pdev = to_pci_dev(dev); struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev); + i_dev->suspended = true; i_dev->disable(i_dev); return 0; @@ -185,8 +186,12 @@ static int i2c_dw_pci_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev); + int ret; - return i_dev->init(i_dev); + ret = i_dev->init(i_dev); + i_dev->suspended = false; + + return ret; } #endif diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 9eaac3be1f63..ead5e7de3e4d 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -454,6 +454,8 @@ static int dw_i2c_plat_suspend(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); + i_dev->suspended = true; + if (i_dev->shared_with_punit) return 0; @@ -471,6 +473,7 @@ static int dw_i2c_plat_resume(struct device *dev) i2c_dw_prepare_clk(i_dev, true); i_dev->init(i_dev); + i_dev->suspended = false; return 0; } diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index c1ce2299a76e..41de4ee409b6 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -183,7 +183,6 @@ enum i2c_type_exynos { struct exynos5_i2c { struct i2c_adapter adap; - unsigned int suspended:1; struct i2c_msg *msg; struct completion msg_complete; @@ -715,11 +714,6 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap, struct exynos5_i2c *i2c = adap->algo_data; int i, ret; - if (i2c->suspended) { - dev_err(i2c->dev, "HS-I2C is not initialized.\n"); - return -EIO; - } - ret = clk_enable(i2c->clk); if (ret) return ret; @@ -847,8 +841,7 @@ static int exynos5_i2c_suspend_noirq(struct device *dev) { struct exynos5_i2c *i2c = dev_get_drvdata(dev); - i2c->suspended = 1; - + i2c_mark_adapter_suspended(&i2c->adap); clk_unprepare(i2c->clk); return 0; @@ -871,7 +864,7 @@ static int exynos5_i2c_resume_noirq(struct device *dev) exynos5_i2c_init(i2c); clk_disable(i2c->clk); - i2c->suspended = 0; + i2c_mark_adapter_resumed(&i2c->adap); return 0; } diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index c008d209f0b8..bba5c4627de3 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -7,17 +7,19 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/completion.h> #include <linux/debugfs.h> #include <linux/delay.h> -#include <linux/i2c.h> +#include <linux/gpio/consumer.h> #include <linux/i2c-algo-bit.h> -#include <linux/platform_data/i2c-gpio.h> +#include <linux/i2c.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/module.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/gpio/consumer.h> #include <linux/of.h> +#include <linux/platform_data/i2c-gpio.h> +#include <linux/platform_device.h> +#include <linux/slab.h> struct i2c_gpio_private_data { struct gpio_desc *sda; @@ -27,6 +29,9 @@ struct i2c_gpio_private_data { struct i2c_gpio_platform_data pdata; #ifdef CONFIG_I2C_GPIO_FAULT_INJECTOR struct dentry *debug_dir; + /* these must be protected by bus lock */ + struct completion scl_irq_completion; + u64 scl_irq_data; #endif }; @@ -162,6 +167,96 @@ static int fops_incomplete_write_byte_set(void *data, u64 addr) } DEFINE_DEBUGFS_ATTRIBUTE(fops_incomplete_write_byte, NULL, fops_incomplete_write_byte_set, "%llu\n"); +static int i2c_gpio_fi_act_on_scl_irq(struct i2c_gpio_private_data *priv, + irqreturn_t handler(int, void*)) +{ + int ret, irq = gpiod_to_irq(priv->scl); + + if (irq < 0) + return irq; + + i2c_lock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER); + + ret = gpiod_direction_input(priv->scl); + if (ret) + goto unlock; + + reinit_completion(&priv->scl_irq_completion); + + ret = request_irq(irq, handler, IRQF_TRIGGER_FALLING, + "i2c_gpio_fault_injector_scl_irq", priv); + if (ret) + goto output; + + wait_for_completion_interruptible(&priv->scl_irq_completion); + + free_irq(irq, priv); + output: + ret = gpiod_direction_output(priv->scl, 1) ?: ret; + unlock: + i2c_unlock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER); + + return ret; +} + +static irqreturn_t lose_arbitration_irq(int irq, void *dev_id) +{ + struct i2c_gpio_private_data *priv = dev_id; + + setsda(&priv->bit_data, 0); + udelay(priv->scl_irq_data); + setsda(&priv->bit_data, 1); + + complete(&priv->scl_irq_completion); + + return IRQ_HANDLED; +} + +static int fops_lose_arbitration_set(void *data, u64 duration) +{ + struct i2c_gpio_private_data *priv = data; + + if (duration > 100 * 1000) + return -EINVAL; + + priv->scl_irq_data = duration; + /* + * Interrupt on falling SCL. This ensures that the master under test has + * really started the transfer. Interrupt on falling SDA did only + * exercise 'bus busy' detection on some HW but not 'arbitration lost'. + * Note that the interrupt latency may cause the first bits to be + * transmitted correctly. + */ + return i2c_gpio_fi_act_on_scl_irq(priv, lose_arbitration_irq); +} +DEFINE_DEBUGFS_ATTRIBUTE(fops_lose_arbitration, NULL, fops_lose_arbitration_set, "%llu\n"); + +static irqreturn_t inject_panic_irq(int irq, void *dev_id) +{ + struct i2c_gpio_private_data *priv = dev_id; + + udelay(priv->scl_irq_data); + panic("I2C fault injector induced panic"); + + return IRQ_HANDLED; +} + +static int fops_inject_panic_set(void *data, u64 duration) +{ + struct i2c_gpio_private_data *priv = data; + + if (duration > 100 * 1000) + return -EINVAL; + + priv->scl_irq_data = duration; + /* + * Interrupt on falling SCL. This ensures that the master under test has + * really started the transfer. + */ + return i2c_gpio_fi_act_on_scl_irq(priv, inject_panic_irq); +} +DEFINE_DEBUGFS_ATTRIBUTE(fops_inject_panic, NULL, fops_inject_panic_set, "%llu\n"); + static void i2c_gpio_fault_injector_init(struct platform_device *pdev) { struct i2c_gpio_private_data *priv = platform_get_drvdata(pdev); @@ -181,12 +276,20 @@ static void i2c_gpio_fault_injector_init(struct platform_device *pdev) if (!priv->debug_dir) return; - debugfs_create_file_unsafe("scl", 0600, priv->debug_dir, priv, &fops_scl); - debugfs_create_file_unsafe("sda", 0600, priv->debug_dir, priv, &fops_sda); + init_completion(&priv->scl_irq_completion); + debugfs_create_file_unsafe("incomplete_address_phase", 0200, priv->debug_dir, priv, &fops_incomplete_addr_phase); debugfs_create_file_unsafe("incomplete_write_byte", 0200, priv->debug_dir, priv, &fops_incomplete_write_byte); + if (priv->bit_data.getscl) { + debugfs_create_file_unsafe("inject_panic", 0200, priv->debug_dir, + priv, &fops_inject_panic); + debugfs_create_file_unsafe("lose_arbitration", 0200, priv->debug_dir, + priv, &fops_lose_arbitration); + } + debugfs_create_file_unsafe("scl", 0600, priv->debug_dir, priv, &fops_scl); + debugfs_create_file_unsafe("sda", 0600, priv->debug_dir, priv, &fops_sda); } static void i2c_gpio_fault_injector_exit(struct platform_device *pdev) @@ -286,11 +389,11 @@ static int i2c_gpio_probe(struct platform_device *pdev) /* * First get the GPIO pins; if it fails, we'll defer the probe. - * If the SDA line is marked from platform data or device tree as - * "open drain" it means something outside of our control is making - * this line being handled as open drain, and we should just handle - * it as any other output. Else we enforce open drain as this is - * required for an I2C bus. + * If the SCL/SDA lines are marked "open drain" by platform data or + * device tree then this means that something outside of our control is + * marking these lines to be handled as open drain, and we should just + * handle them as we handle any other output. Else we enforce open + * drain as this is required for an I2C bus. */ if (pdata->sda_is_open_drain) gflags = GPIOD_OUT_HIGH; @@ -300,13 +403,6 @@ static int i2c_gpio_probe(struct platform_device *pdev) if (IS_ERR(priv->sda)) return PTR_ERR(priv->sda); - /* - * If the SCL line is marked from platform data or device tree as - * "open drain" it means something outside of our control is making - * this line being handled as open drain, and we should just handle - * it as any other output. Else we enforce open drain as this is - * required for an I2C bus. - */ if (pdata->scl_is_open_drain) gflags = GPIOD_OUT_HIGH; else diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index fa9ad53845d9..42fed40198a0 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -273,8 +273,8 @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx, } /* Functions for DMA support */ -static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, - dma_addr_t phy_addr) +static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, + dma_addr_t phy_addr) { struct imx_i2c_dma *dma; struct dma_slave_config dma_sconfig; @@ -283,11 +283,13 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); if (!dma) - return; + return -ENOMEM; - dma->chan_tx = dma_request_slave_channel(dev, "tx"); - if (!dma->chan_tx) { - dev_dbg(dev, "can't request DMA tx channel\n"); + dma->chan_tx = dma_request_chan(dev, "tx"); + if (IS_ERR(dma->chan_tx)) { + ret = PTR_ERR(dma->chan_tx); + if (ret != -ENODEV && ret != -EPROBE_DEFER) + dev_err(dev, "can't request DMA tx channel (%d)\n", ret); goto fail_al; } @@ -298,13 +300,15 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dma_sconfig.direction = DMA_MEM_TO_DEV; ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig); if (ret < 0) { - dev_dbg(dev, "can't configure tx channel\n"); + dev_err(dev, "can't configure tx channel (%d)\n", ret); goto fail_tx; } - dma->chan_rx = dma_request_slave_channel(dev, "rx"); - if (!dma->chan_rx) { - dev_dbg(dev, "can't request DMA rx channel\n"); + dma->chan_rx = dma_request_chan(dev, "rx"); + if (IS_ERR(dma->chan_rx)) { + ret = PTR_ERR(dma->chan_rx); + if (ret != -ENODEV && ret != -EPROBE_DEFER) + dev_err(dev, "can't request DMA rx channel (%d)\n", ret); goto fail_tx; } @@ -315,7 +319,7 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dma_sconfig.direction = DMA_DEV_TO_MEM; ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig); if (ret < 0) { - dev_dbg(dev, "can't configure rx channel\n"); + dev_err(dev, "can't configure rx channel (%d)\n", ret); goto fail_rx; } @@ -324,7 +328,7 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n", dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx)); - return; + return 0; fail_rx: dma_release_channel(dma->chan_rx); @@ -332,7 +336,8 @@ fail_tx: dma_release_channel(dma->chan_tx); fail_al: devm_kfree(dev, dma); - dev_info(dev, "can't use DMA, using PIO instead.\n"); + /* return successfully if there is no dma support */ + return ret == -ENODEV ? 0 : ret; } static void i2c_imx_dma_callback(void *arg) @@ -1160,11 +1165,13 @@ static int i2c_imx_probe(struct platform_device *pdev) dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res); dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", i2c_imx->adapter.name); - dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); /* Init DMA config if supported */ - i2c_imx_dma_request(i2c_imx, phy_addr); + ret = i2c_imx_dma_request(i2c_imx, phy_addr); + if (ret < 0) + goto clk_notifier_unregister; + dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); return 0; /* Return OK */ clk_notifier_unregister: diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 85cbe4b55578..a34cb3848280 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -471,6 +471,7 @@ iop3xx_i2c_probe(struct platform_device *pdev) new_adapter->owner = THIS_MODULE; new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; new_adapter->dev.parent = &pdev->dev; + new_adapter->dev.of_node = pdev->dev.of_node; new_adapter->nr = pdev->id; /* @@ -508,12 +509,19 @@ out: return ret; } +static const struct of_device_id i2c_iop3xx_match[] = { + { .compatible = "intel,iop3xx-i2c", }, + { .compatible = "intel,ixp4xx-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, i2c_iop3xx_match); static struct platform_driver iop3xx_i2c_driver = { .probe = iop3xx_i2c_probe, .remove = iop3xx_i2c_remove, .driver = { .name = "IOP3xx-I2C", + .of_match_table = i2c_iop3xx_match, }, }; diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index a74ef76705e0..660de1ee68ed 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -456,7 +456,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, control_reg = readw(i2c->base + OFFSET_CONTROL) & ~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS); - if ((i2c->speed_hz > 400000) || (left_num >= 1)) + if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1)) control_reg |= I2C_CONTROL_RS; if (i2c->op == I2C_MASTER_WRRD) @@ -465,7 +465,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, writew(control_reg, i2c->base + OFFSET_CONTROL); /* set start condition */ - if (i2c->speed_hz <= 100000) + if (i2c->speed_hz <= I2C_DEFAULT_SPEED) writew(I2C_ST_START_CON, i2c->base + OFFSET_EXT_CONF); else writew(I2C_FS_START_CON, i2c->base + OFFSET_EXT_CONF); @@ -642,8 +642,6 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, return -ETIMEDOUT; } - completion_done(&i2c->msg_complete); - if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) { dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr); mtk_i2c_init_hw(i2c); diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 87f9caacba85..4e1a077fb688 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * i2c-ocores.c: I2C bus driver for OpenCores I2C controller * (https://opencores.org/project/i2c/overview) @@ -6,13 +7,10 @@ * * Support for the GRLIB port of the controller by * Andreas Larsson <andreas@gaisler.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <linux/clk.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/kernel.h> #include <linux/module.h> @@ -25,17 +23,28 @@ #include <linux/slab.h> #include <linux/io.h> #include <linux/log2.h> +#include <linux/spinlock.h> +#include <linux/jiffies.h> + +#define OCORES_FLAG_POLL BIT(0) +/* + * 'process_lock' exists because ocores_process() and ocores_process_timeout() + * can't run in parallel. + */ struct ocores_i2c { void __iomem *base; + int iobase; u32 reg_shift; u32 reg_io_width; + unsigned long flags; wait_queue_head_t wait; struct i2c_adapter adap; struct i2c_msg *msg; int pos; int nmsgs; int state; /* see STATE_ */ + spinlock_t process_lock; struct clk *clk; int ip_clock_khz; int bus_clock_khz; @@ -127,6 +136,16 @@ static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg) return ioread32be(i2c->base + (reg << i2c->reg_shift)); } +static void oc_setreg_io_8(struct ocores_i2c *i2c, int reg, u8 value) +{ + outb(value, i2c->iobase + reg); +} + +static inline u8 oc_getreg_io_8(struct ocores_i2c *i2c, int reg) +{ + return inb(i2c->iobase + reg); +} + static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value) { i2c->setreg(i2c, reg, value); @@ -137,23 +156,29 @@ static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg) return i2c->getreg(i2c, reg); } -static void ocores_process(struct ocores_i2c *i2c) +static void ocores_process(struct ocores_i2c *i2c, u8 stat) { struct i2c_msg *msg = i2c->msg; - u8 stat = oc_getreg(i2c, OCI2C_STATUS); + unsigned long flags; + + /* + * If we spin here is because we are in timeout, so we are going + * to be in STATE_ERROR. See ocores_process_timeout() + */ + spin_lock_irqsave(&i2c->process_lock, flags); if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) { /* stop has been sent */ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); wake_up(&i2c->wait); - return; + goto out; } /* error? */ if (stat & OCI2C_STAT_ARBLOST) { i2c->state = STATE_ERROR; oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); - return; + goto out; } if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) { @@ -163,10 +188,11 @@ static void ocores_process(struct ocores_i2c *i2c) if (stat & OCI2C_STAT_NACK) { i2c->state = STATE_ERROR; oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); - return; + goto out; } - } else + } else { msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA); + } /* end of msg? */ if (i2c->pos == msg->len) { @@ -183,15 +209,15 @@ static void ocores_process(struct ocores_i2c *i2c) i2c->state = STATE_START; oc_setreg(i2c, OCI2C_DATA, addr); - oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); - return; - } else - i2c->state = (msg->flags & I2C_M_RD) - ? STATE_READ : STATE_WRITE; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); + goto out; + } + i2c->state = (msg->flags & I2C_M_RD) + ? STATE_READ : STATE_WRITE; } else { i2c->state = STATE_DONE; oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); - return; + goto out; } } @@ -202,20 +228,148 @@ static void ocores_process(struct ocores_i2c *i2c) oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]); oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE); } + +out: + spin_unlock_irqrestore(&i2c->process_lock, flags); } static irqreturn_t ocores_isr(int irq, void *dev_id) { struct ocores_i2c *i2c = dev_id; + u8 stat = oc_getreg(i2c, OCI2C_STATUS); + + if (!(stat & OCI2C_STAT_IF)) + return IRQ_NONE; - ocores_process(i2c); + ocores_process(i2c, stat); return IRQ_HANDLED; } -static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +/** + * Process timeout event + * @i2c: ocores I2C device instance + */ +static void ocores_process_timeout(struct ocores_i2c *i2c) { - struct ocores_i2c *i2c = i2c_get_adapdata(adap); + unsigned long flags; + + spin_lock_irqsave(&i2c->process_lock, flags); + i2c->state = STATE_ERROR; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + spin_unlock_irqrestore(&i2c->process_lock, flags); +} + +/** + * Wait until something change in a given register + * @i2c: ocores I2C device instance + * @reg: register to query + * @mask: bitmask to apply on register value + * @val: expected result + * @timeout: timeout in jiffies + * + * Timeout is necessary to avoid to stay here forever when the chip + * does not answer correctly. + * + * Return: 0 on success, -ETIMEDOUT on timeout + */ +static int ocores_wait(struct ocores_i2c *i2c, + int reg, u8 mask, u8 val, + const unsigned long timeout) +{ + unsigned long j; + + j = jiffies + timeout; + while (1) { + u8 status = oc_getreg(i2c, reg); + + if ((status & mask) == val) + break; + + if (time_after(jiffies, j)) + return -ETIMEDOUT; + } + return 0; +} + +/** + * Wait until is possible to process some data + * @i2c: ocores I2C device instance + * + * Used when the device is in polling mode (interrupts disabled). + * + * Return: 0 on success, -ETIMEDOUT on timeout + */ +static int ocores_poll_wait(struct ocores_i2c *i2c) +{ + u8 mask; + int err; + + if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) { + /* transfer is over */ + mask = OCI2C_STAT_BUSY; + } else { + /* on going transfer */ + mask = OCI2C_STAT_TIP; + /* + * We wait for the data to be transferred (8bit), + * then we start polling on the ACK/NACK bit + */ + udelay((8 * 1000) / i2c->bus_clock_khz); + } + + /* + * once we are here we expect to get the expected result immediately + * so if after 1ms we timeout then something is broken. + */ + err = ocores_wait(i2c, OCI2C_STATUS, mask, 0, msecs_to_jiffies(1)); + if (err) + dev_warn(i2c->adap.dev.parent, + "%s: STATUS timeout, bit 0x%x did not clear in 1ms\n", + __func__, mask); + return err; +} + +/** + * It handles an IRQ-less transfer + * @i2c: ocores I2C device instance + * + * Even if IRQ are disabled, the I2C OpenCore IP behavior is exactly the same + * (only that IRQ are not produced). This means that we can re-use entirely + * ocores_isr(), we just add our polling code around it. + * + * It can run in atomic context + */ +static void ocores_process_polling(struct ocores_i2c *i2c) +{ + while (1) { + irqreturn_t ret; + int err; + + err = ocores_poll_wait(i2c); + if (err) { + i2c->state = STATE_ERROR; + break; /* timeout */ + } + + ret = ocores_isr(-1, i2c); + if (ret == IRQ_NONE) + break; /* all messages have been transferred */ + } +} + +static int ocores_xfer_core(struct ocores_i2c *i2c, + struct i2c_msg *msgs, int num, + bool polling) +{ + int ret; + u8 ctrl; + + ctrl = oc_getreg(i2c, OCI2C_CONTROL); + if (polling) + oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~OCI2C_CTRL_IEN); + else + oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN); i2c->msg = msgs; i2c->pos = 0; @@ -225,11 +379,35 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg)); oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); - if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) || - (i2c->state == STATE_DONE), HZ)) - return (i2c->state == STATE_DONE) ? num : -EIO; - else - return -ETIMEDOUT; + if (polling) { + ocores_process_polling(i2c); + } else { + ret = wait_event_timeout(i2c->wait, + (i2c->state == STATE_ERROR) || + (i2c->state == STATE_DONE), HZ); + if (ret == 0) { + ocores_process_timeout(i2c); + return -ETIMEDOUT; + } + } + + return (i2c->state == STATE_DONE) ? num : -EIO; +} + +static int ocores_xfer_polling(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + return ocores_xfer_core(i2c_get_adapdata(adap), msgs, num, true); +} + +static int ocores_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct ocores_i2c *i2c = i2c_get_adapdata(adap); + + if (i2c->flags & OCORES_FLAG_POLL) + return ocores_xfer_polling(adap, msgs, num); + return ocores_xfer_core(i2c, msgs, num, false); } static int ocores_init(struct device *dev, struct ocores_i2c *i2c) @@ -239,7 +417,8 @@ static int ocores_init(struct device *dev, struct ocores_i2c *i2c) u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); /* make sure the device is disabled */ - oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); + ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); + oc_setreg(i2c, OCI2C_CONTROL, ctrl); prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1; prescale = clamp(prescale, 0, 0xffff); @@ -257,7 +436,7 @@ static int ocores_init(struct device *dev, struct ocores_i2c *i2c) /* Init the device */ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); - oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN); + oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN); return 0; } @@ -294,13 +473,16 @@ static const struct of_device_id ocores_i2c_match[] = { MODULE_DEVICE_TABLE(of, ocores_i2c_match); #ifdef CONFIG_OF -/* Read and write functions for the GRLIB port of the controller. Registers are +/* + * Read and write functions for the GRLIB port of the controller. Registers are * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one - * register. The subsequent registers has their offset decreased accordingly. */ + * register. The subsequent registers have their offsets decreased accordingly. + */ static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg) { u32 rd; int rreg = reg; + if (reg != OCI2C_PRELOW) rreg--; rd = ioread32be(i2c->base + (rreg << i2c->reg_shift)); @@ -314,6 +496,7 @@ static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value) { u32 curr, wr; int rreg = reg; + if (reg != OCI2C_PRELOW) rreg--; if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) { @@ -402,7 +585,7 @@ static int ocores_i2c_of_probe(struct platform_device *pdev, return 0; } #else -#define ocores_i2c_of_probe(pdev,i2c) -ENODEV +#define ocores_i2c_of_probe(pdev, i2c) -ENODEV #endif static int ocores_i2c_probe(struct platform_device *pdev) @@ -414,25 +597,41 @@ static int ocores_i2c_probe(struct platform_device *pdev) int ret; int i; - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); if (!i2c) return -ENOMEM; + spin_lock_init(&i2c->process_lock); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - i2c->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(i2c->base)) - return PTR_ERR(i2c->base); + if (res) { + i2c->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c->base)) + return PTR_ERR(i2c->base); + } else { + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) + return -EINVAL; + i2c->iobase = res->start; + if (!devm_request_region(&pdev->dev, res->start, + resource_size(res), + pdev->name)) { + dev_err(&pdev->dev, "Can't get I/O resource.\n"); + return -EBUSY; + } + i2c->setreg = oc_setreg_io_8; + i2c->getreg = oc_getreg_io_8; + } pdata = dev_get_platdata(&pdev->dev); if (pdata) { i2c->reg_shift = pdata->reg_shift; i2c->reg_io_width = pdata->reg_io_width; i2c->ip_clock_khz = pdata->clock_khz; - i2c->bus_clock_khz = 100; + if (pdata->bus_khz) + i2c->bus_clock_khz = pdata->bus_khz; + else + i2c->bus_clock_khz = 100; } else { ret = ocores_i2c_of_probe(pdev, i2c); if (ret) @@ -470,18 +669,29 @@ static int ocores_i2c_probe(struct platform_device *pdev) } } + init_waitqueue_head(&i2c->wait); + + irq = platform_get_irq(pdev, 0); + if (irq == -ENXIO) { + i2c->flags |= OCORES_FLAG_POLL; + } else { + if (irq < 0) + return irq; + } + + if (!(i2c->flags & OCORES_FLAG_POLL)) { + ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0, + pdev->name, i2c); + if (ret) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + goto err_clk; + } + } + ret = ocores_init(&pdev->dev, i2c); if (ret) goto err_clk; - init_waitqueue_head(&i2c->wait); - ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0, - pdev->name, i2c); - if (ret) { - dev_err(&pdev->dev, "Cannot claim IRQ\n"); - goto err_clk; - } - /* hook up driver to tree */ platform_set_drvdata(pdev, i2c); i2c->adap = ocores_adapter; @@ -510,10 +720,11 @@ err_clk: static int ocores_i2c_remove(struct platform_device *pdev) { struct ocores_i2c *i2c = platform_get_drvdata(pdev); + u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); /* disable i2c logic */ - oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL) - & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); + ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); + oc_setreg(i2c, OCI2C_CONTROL, ctrl); /* remove adapter & data */ i2c_del_adapter(&i2c->adap); @@ -531,7 +742,8 @@ static int ocores_i2c_suspend(struct device *dev) u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); /* make sure the device is disabled */ - oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); + ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); + oc_setreg(i2c, OCI2C_CONTROL, ctrl); if (!IS_ERR(i2c->clk)) clk_disable_unprepare(i2c->clk); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 254e6219e538..dd52a068b140 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -2,8 +2,8 @@ /* * Driver for the Renesas R-Car I2C unit * - * Copyright (C) 2014-15 Wolfram Sang <wsa@sang-engineering.com> - * Copyright (C) 2011-2015 Renesas Electronics Corporation + * Copyright (C) 2014-19 Wolfram Sang <wsa@sang-engineering.com> + * Copyright (C) 2011-2019 Renesas Electronics Corporation * * Copyright (C) 2012-14 Renesas Solutions Corp. * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> @@ -39,8 +39,8 @@ #define ICSAR 0x1C /* slave address */ #define ICMAR 0x20 /* master address */ #define ICRXTX 0x24 /* data port */ -#define ICDMAER 0x3c /* DMA enable */ -#define ICFBSCR 0x38 /* first bit setup cycle */ +#define ICFBSCR 0x38 /* first bit setup cycle (Gen3) */ +#define ICDMAER 0x3c /* DMA enable (Gen3) */ /* ICSCR */ #define SDBS (1 << 3) /* slave data buffer select */ @@ -83,7 +83,6 @@ #define TMDMAE (1 << 0) /* DMA Master Transmitted Enable */ /* ICFBSCR */ -#define TCYC06 0x04 /* 6*Tcyc delay 1st bit between SDA and SCL */ #define TCYC17 0x0f /* 17*Tcyc delay 1st bit between SDA and SCL */ @@ -212,6 +211,10 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv) rcar_i2c_write(priv, ICMSR, 0); /* start clock */ rcar_i2c_write(priv, ICCCR, priv->icccr); + + if (priv->devtype == I2C_RCAR_GEN3) + rcar_i2c_write(priv, ICFBSCR, TCYC17); + } static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) @@ -355,9 +358,6 @@ static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv) rcar_i2c_prepare_msg(priv); } -/* - * interrupt functions - */ static void rcar_i2c_dma_unmap(struct rcar_i2c_priv *priv) { struct dma_chan *chan = priv->dma_direction == DMA_FROM_DEVICE @@ -366,9 +366,6 @@ static void rcar_i2c_dma_unmap(struct rcar_i2c_priv *priv) /* Disable DMA Master Received/Transmitted */ rcar_i2c_write(priv, ICDMAER, 0); - /* Reset default delay */ - rcar_i2c_write(priv, ICFBSCR, TCYC06); - dma_unmap_single(chan->device->dev, sg_dma_address(&priv->sg), sg_dma_len(&priv->sg), priv->dma_direction); @@ -464,9 +461,6 @@ static void rcar_i2c_dma(struct rcar_i2c_priv *priv) return; } - /* Set delay for DMA operations */ - rcar_i2c_write(priv, ICFBSCR, TCYC17); - /* Enable DMA Master Received/Transmitted */ if (read) rcar_i2c_write(priv, ICDMAER, RMDMAE); @@ -1017,10 +1011,37 @@ static int rcar_i2c_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int rcar_i2c_suspend(struct device *dev) +{ + struct rcar_i2c_priv *priv = dev_get_drvdata(dev); + + i2c_mark_adapter_suspended(&priv->adap); + return 0; +} + +static int rcar_i2c_resume(struct device *dev) +{ + struct rcar_i2c_priv *priv = dev_get_drvdata(dev); + + i2c_mark_adapter_resumed(&priv->adap); + return 0; +} + +static const struct dev_pm_ops rcar_i2c_pm_ops = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(rcar_i2c_suspend, rcar_i2c_resume) +}; + +#define DEV_PM_OPS (&rcar_i2c_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + static struct platform_driver rcar_i2c_driver = { .driver = { .name = "i2c-rcar", .of_match_table = rcar_i2c_dt_ids, + .pm = DEV_PM_OPS, }, .probe = rcar_i2c_probe, .remove = rcar_i2c_remove, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 2f2e28d60ef5..53bc021f4a5a 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -104,7 +104,6 @@ enum s3c24xx_i2c_state { struct s3c24xx_i2c { wait_queue_head_t wait; kernel_ulong_t quirks; - unsigned int suspended:1; struct i2c_msg *msg; unsigned int msg_num; @@ -703,9 +702,6 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, unsigned long timeout; int ret; - if (i2c->suspended) - return -EIO; - ret = s3c24xx_i2c_set_master(i2c); if (ret != 0) { dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); @@ -1246,7 +1242,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev) { struct s3c24xx_i2c *i2c = dev_get_drvdata(dev); - i2c->suspended = 1; + i2c_mark_adapter_suspended(&i2c->adap); if (!IS_ERR(i2c->sysreg)) regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg); @@ -1267,7 +1263,7 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev) return ret; s3c24xx_i2c_init(i2c); clk_disable(i2c->clk); - i2c->suspended = 0; + i2c_mark_adapter_resumed(&i2c->adap); return 0; } diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index a64f2ff3cb49..8777af4c695e 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -2,8 +2,7 @@ /* * SuperH Mobile I2C Controller * - * Copyright (C) 2014 Wolfram Sang <wsa@sang-engineering.com> - * + * Copyright (C) 2014-19 Wolfram Sang <wsa@sang-engineering.com> * Copyright (C) 2008 Magnus Damm * * Portions of the code based on out-of-tree driver i2c-sh7343.c @@ -303,13 +302,12 @@ static int sh_mobile_i2c_v2_init(struct sh_mobile_i2c_data *pd) return sh_mobile_i2c_check_timing(pd); } -static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, - enum sh_mobile_i2c_op op, unsigned char data) +static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, enum sh_mobile_i2c_op op) { unsigned char ret = 0; unsigned long flags; - dev_dbg(pd->dev, "op %d, data in 0x%02x\n", op, data); + dev_dbg(pd->dev, "op %d\n", op); spin_lock_irqsave(&pd->lock, flags); @@ -317,12 +315,12 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, case OP_START: /* issue start and trigger DTE interrupt */ iic_wr(pd, ICCR, ICCR_ICE | ICCR_TRS | ICCR_BBSY); break; - case OP_TX_FIRST: /* disable DTE interrupt and write data */ + case OP_TX_FIRST: /* disable DTE interrupt and write client address */ iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE); - iic_wr(pd, ICDR, data); + iic_wr(pd, ICDR, i2c_8bit_addr_from_msg(pd->msg)); break; case OP_TX: /* write data */ - iic_wr(pd, ICDR, data); + iic_wr(pd, ICDR, pd->msg->buf[pd->pos]); break; case OP_TX_STOP: /* issue a stop (or rep_start) */ iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS @@ -353,34 +351,17 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, return ret; } -static bool sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd) -{ - return pd->pos == -1; -} - -static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd, - unsigned char *buf) -{ - switch (pd->pos) { - case -1: - *buf = i2c_8bit_addr_from_msg(pd->msg); - break; - default: - *buf = pd->msg->buf[pd->pos]; - } -} - static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd) { - unsigned char data; - if (pd->pos == pd->msg->len) { - i2c_op(pd, OP_TX_STOP, 0); + i2c_op(pd, OP_TX_STOP); return 1; } - sh_mobile_i2c_get_data(pd, &data); - i2c_op(pd, sh_mobile_i2c_is_first_byte(pd) ? OP_TX_FIRST : OP_TX, data); + if (pd->pos == -1) + i2c_op(pd, OP_TX_FIRST); + else + i2c_op(pd, OP_TX); pd->pos++; return 0; @@ -391,45 +372,32 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) unsigned char data; int real_pos; - do { - if (pd->pos <= -1) { - sh_mobile_i2c_get_data(pd, &data); - - if (sh_mobile_i2c_is_first_byte(pd)) - i2c_op(pd, OP_TX_FIRST, data); - else - i2c_op(pd, OP_TX, data); - break; - } - - if (pd->pos == 0) { - i2c_op(pd, OP_TX_TO_RX, 0); - break; - } - - real_pos = pd->pos - 2; - - if (pd->pos == pd->msg->len) { - if (pd->stop_after_dma) { - /* Simulate PIO end condition after DMA transfer */ - i2c_op(pd, OP_RX_STOP, 0); - pd->pos++; - break; - } - - if (real_pos < 0) { - i2c_op(pd, OP_RX_STOP, 0); - break; - } - data = i2c_op(pd, OP_RX_STOP_DATA, 0); - } else if (real_pos >= 0) { - data = i2c_op(pd, OP_RX, 0); + /* switch from TX (address) to RX (data) adds two interrupts */ + real_pos = pd->pos - 2; + + if (pd->pos == -1) { + i2c_op(pd, OP_TX_FIRST); + } else if (pd->pos == 0) { + i2c_op(pd, OP_TX_TO_RX); + } else if (pd->pos == pd->msg->len) { + if (pd->stop_after_dma) { + /* Simulate PIO end condition after DMA transfer */ + i2c_op(pd, OP_RX_STOP); + pd->pos++; + goto done; } - if (real_pos >= 0) - pd->msg->buf[real_pos] = data; - } while (0); + if (real_pos < 0) + i2c_op(pd, OP_RX_STOP); + else + data = i2c_op(pd, OP_RX_STOP_DATA); + } else if (real_pos >= 0) { + data = i2c_op(pd, OP_RX); + } + if (real_pos >= 0) + pd->msg->buf[real_pos] = data; + done: pd->pos++; return pd->pos == (pd->msg->len + 2); } @@ -698,7 +666,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, start_ch(pd, msg, do_start); if (do_start) - i2c_op(pd, OP_START, 0); + i2c_op(pd, OP_START); /* The interrupt handler takes care of the rest... */ timeout = wait_event_timeout(pd->wait, @@ -749,8 +717,7 @@ static const struct i2c_adapter_quirks sh_mobile_i2c_quirks = { }; /* - * r8a7740 chip has lasting errata on I2C I/O pad reset. - * this is work-around for it. + * r8a7740 has an errata regarding I2C I/O pad reset needing this workaround. */ static int sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd) { @@ -802,15 +769,15 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = { { .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config }, { .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config }, - { .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config }, - { .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config }, - { .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config }, - { .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config }, - { .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config }, - { .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config }, - { .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config }, - { .compatible = "renesas,iic-r8a77990", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config }, + { .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config }, + { .compatible = "renesas,iic-r8a7793", .data = &v2_freq_calc_dt_config }, + { .compatible = "renesas,iic-r8a7794", .data = &v2_freq_calc_dt_config }, + { .compatible = "renesas,iic-r8a7795", .data = &v2_freq_calc_dt_config }, + { .compatible = "renesas,iic-r8a77990", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config }, + { .compatible = "renesas,rcar-gen2-iic", .data = &v2_freq_calc_dt_config }, + { .compatible = "renesas,rcar-gen3-iic", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,rmobile-iic", .data = &default_dt_config }, {}, }; diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index a94e724f51dc..961123529678 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -86,7 +86,6 @@ struct sprd_i2c { u32 count; int irq; int err; - bool is_suspended; }; static void sprd_i2c_set_count(struct sprd_i2c *i2c_dev, u32 count) @@ -284,9 +283,6 @@ static int sprd_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct sprd_i2c *i2c_dev = i2c_adap->algo_data; int im, ret; - if (i2c_dev->is_suspended) - return -EBUSY; - ret = pm_runtime_get_sync(i2c_dev->dev); if (ret < 0) return ret; @@ -586,40 +582,34 @@ static int sprd_i2c_remove(struct platform_device *pdev) return 0; } -static int __maybe_unused sprd_i2c_suspend_noirq(struct device *pdev) +static int __maybe_unused sprd_i2c_suspend_noirq(struct device *dev) { - struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev); - - i2c_lock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER); - i2c_dev->is_suspended = true; - i2c_unlock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER); + struct sprd_i2c *i2c_dev = dev_get_drvdata(dev); - return pm_runtime_force_suspend(pdev); + i2c_mark_adapter_suspended(&i2c_dev->adap); + return pm_runtime_force_suspend(dev); } -static int __maybe_unused sprd_i2c_resume_noirq(struct device *pdev) +static int __maybe_unused sprd_i2c_resume_noirq(struct device *dev) { - struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev); - - i2c_lock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER); - i2c_dev->is_suspended = false; - i2c_unlock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER); + struct sprd_i2c *i2c_dev = dev_get_drvdata(dev); - return pm_runtime_force_resume(pdev); + i2c_mark_adapter_resumed(&i2c_dev->adap); + return pm_runtime_force_resume(dev); } -static int __maybe_unused sprd_i2c_runtime_suspend(struct device *pdev) +static int __maybe_unused sprd_i2c_runtime_suspend(struct device *dev) { - struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev); + struct sprd_i2c *i2c_dev = dev_get_drvdata(dev); clk_disable_unprepare(i2c_dev->clk); return 0; } -static int __maybe_unused sprd_i2c_runtime_resume(struct device *pdev) +static int __maybe_unused sprd_i2c_runtime_resume(struct device *dev) { - struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev); + struct sprd_i2c *i2c_dev = dev_get_drvdata(dev); int ret; ret = clk_prepare_enable(i2c_dev->clk); diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c index 2184b7c3580e..d18b0941b71a 100644 --- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -144,8 +144,6 @@ struct synquacer_i2c { u32 timeout_ms; enum i2c_state state; struct i2c_adapter adapter; - - bool is_suspended; }; static inline int is_lastmsg(struct synquacer_i2c *i2c) @@ -316,9 +314,6 @@ static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c, unsigned long timeout; int ret; - if (i2c->is_suspended) - return -EBUSY; - synquacer_i2c_hw_init(i2c); bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); if (bsr & SYNQUACER_I2C_BSR_BB) { diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index c77adbbea0c7..ebaa78d17d6e 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -6,26 +6,24 @@ * Author: Colin Cross <ccross@android.com> */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/i2c.h> -#include <linux/io.h> +#include <linux/init.h> #include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/of_device.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> #include <linux/module.h> -#include <linux/reset.h> +#include <linux/of_device.h> #include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/iopoll.h> - -#include <asm/unaligned.h> +#include <linux/reset.h> -#define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000)) #define BYTES_PER_FIFO_WORD 4 #define I2C_CNFG 0x000 @@ -45,8 +43,8 @@ #define I2C_FIFO_CONTROL 0x05c #define I2C_FIFO_CONTROL_TX_FLUSH BIT(1) #define I2C_FIFO_CONTROL_RX_FLUSH BIT(0) -#define I2C_FIFO_CONTROL_TX_TRIG_SHIFT 5 -#define I2C_FIFO_CONTROL_RX_TRIG_SHIFT 2 +#define I2C_FIFO_CONTROL_TX_TRIG(x) (((x) - 1) << 5) +#define I2C_FIFO_CONTROL_RX_TRIG(x) (((x) - 1) << 2) #define I2C_FIFO_STATUS 0x060 #define I2C_FIFO_STATUS_TX_MASK 0xF0 #define I2C_FIFO_STATUS_TX_SHIFT 4 @@ -54,6 +52,7 @@ #define I2C_FIFO_STATUS_RX_SHIFT 0 #define I2C_INT_MASK 0x064 #define I2C_INT_STATUS 0x068 +#define I2C_INT_BUS_CLR_DONE BIT(11) #define I2C_INT_PACKET_XFER_COMPLETE BIT(7) #define I2C_INT_ALL_PACKETS_XFER_COMPLETE BIT(6) #define I2C_INT_TX_FIFO_OVERFLOW BIT(5) @@ -96,6 +95,15 @@ #define I2C_HEADER_MASTER_ADDR_SHIFT 12 #define I2C_HEADER_SLAVE_ADDR_SHIFT 1 +#define I2C_BUS_CLEAR_CNFG 0x084 +#define I2C_BC_SCLK_THRESHOLD 9 +#define I2C_BC_SCLK_THRESHOLD_SHIFT 16 +#define I2C_BC_STOP_COND BIT(2) +#define I2C_BC_TERMINATE BIT(1) +#define I2C_BC_ENABLE BIT(0) +#define I2C_BUS_CLEAR_STATUS 0x088 +#define I2C_BC_STATUS BIT(0) + #define I2C_CONFIG_LOAD 0x08C #define I2C_MSTR_CONFIG_LOAD BIT(0) #define I2C_SLV_CONFIG_LOAD BIT(1) @@ -118,6 +126,25 @@ #define I2C_MST_FIFO_STATUS_TX_MASK 0xff0000 #define I2C_MST_FIFO_STATUS_TX_SHIFT 16 +#define I2C_INTERFACE_TIMING_0 0x94 +#define I2C_THIGH_SHIFT 8 +#define I2C_INTERFACE_TIMING_1 0x98 + +#define I2C_STANDARD_MODE 100000 +#define I2C_FAST_MODE 400000 +#define I2C_FAST_PLUS_MODE 1000000 +#define I2C_HS_MODE 3500000 + +/* Packet header size in bytes */ +#define I2C_PACKET_HEADER_SIZE 12 + +/* + * Upto I2C_PIO_MODE_MAX_LEN bytes, controller will use PIO mode, + * above this, controller will use DMA to fill FIFO. + * MAX PIO len is 20 bytes excluding packet header. + */ +#define I2C_PIO_MODE_MAX_LEN 32 + /* * msg_end_type: The bus control which need to be send at end of transfer. * @MSG_END_STOP: Send stop pulse at end of transfer. @@ -142,7 +169,10 @@ enum msg_end_type { * @has_config_load_reg: Has the config load register to load the new * configuration. * @clk_divisor_hs_mode: Clock divisor in HS mode. - * @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is + * @clk_divisor_std_mode: Clock divisor in standard mode. It is + * applicable if there is no fast clock source i.e. single clock + * source. + * @clk_divisor_fast_mode: Clock divisor in fast mode. It is * applicable if there is no fast clock source i.e. single clock * source. * @clk_divisor_fast_plus_mode: Clock divisor in fast mode plus. It is @@ -157,6 +187,21 @@ enum msg_end_type { * be transferred in one go. * @quirks: i2c adapter quirks for limiting write/read transfer size and not * allowing 0 length transfers. + * @supports_bus_clear: Bus Clear support to recover from bus hang during + * SDA stuck low from device for some unknown reasons. + * @has_apb_dma: Support of APBDMA on corresponding Tegra chip. + * @tlow_std_mode: Low period of the clock in standard mode. + * @thigh_std_mode: High period of the clock in standard mode. + * @tlow_fast_fastplus_mode: Low period of the clock in fast/fast-plus modes. + * @thigh_fast_fastplus_mode: High period of the clock in fast/fast-plus modes. + * @setup_hold_time_std_mode: Setup and hold time for start and stop conditions + * in standard mode. + * @setup_hold_time_fast_fast_plus_mode: Setup and hold time for start and stop + * conditions in fast/fast-plus modes. + * @setup_hold_time_hs_mode: Setup and hold time for start and stop conditions + * in HS mode. + * @has_interface_timing_reg: Has interface timing register to program the tuned + * timing settings. */ struct tegra_i2c_hw_feature { bool has_continue_xfer_support; @@ -164,12 +209,23 @@ struct tegra_i2c_hw_feature { bool has_single_clk_source; bool has_config_load_reg; int clk_divisor_hs_mode; - int clk_divisor_std_fast_mode; + int clk_divisor_std_mode; + int clk_divisor_fast_mode; u16 clk_divisor_fast_plus_mode; bool has_multi_master_mode; bool has_slcg_override_reg; bool has_mst_fifo; const struct i2c_adapter_quirks *quirks; + bool supports_bus_clear; + bool has_apb_dma; + u8 tlow_std_mode; + u8 thigh_std_mode; + u8 tlow_fast_fastplus_mode; + u8 thigh_fast_fastplus_mode; + u32 setup_hold_time_std_mode; + u32 setup_hold_time_fast_fast_plus_mode; + u32 setup_hold_time_hs_mode; + bool has_interface_timing_reg; }; /** @@ -181,6 +237,7 @@ struct tegra_i2c_hw_feature { * @fast_clk: clock reference for fast clock of I2C controller * @rst: reset control for the I2C controller * @base: ioremapped registers cookie + * @base_phys: physical base address of the I2C controller * @cont_id: I2C controller ID, used for packet header * @irq: IRQ number of transfer complete interrupt * @irq_disabled: used to track whether or not the interrupt is enabled @@ -194,6 +251,13 @@ struct tegra_i2c_hw_feature { * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes * @is_multimaster_mode: track if I2C controller is in multi-master mode * @xfer_lock: lock to serialize transfer submission and processing + * @tx_dma_chan: DMA transmit channel + * @rx_dma_chan: DMA receive channel + * @dma_phys: handle to DMA resources + * @dma_buf: pointer to allocated DMA buffer + * @dma_buf_size: DMA buffer size + * @is_curr_dma_xfer: indicates active DMA transfer + * @dma_complete: DMA completion notifier */ struct tegra_i2c_dev { struct device *dev; @@ -203,6 +267,7 @@ struct tegra_i2c_dev { struct clk *fast_clk; struct reset_control *rst; void __iomem *base; + phys_addr_t base_phys; int cont_id; int irq; bool irq_disabled; @@ -216,6 +281,13 @@ struct tegra_i2c_dev { u16 clk_divisor_non_hs_mode; bool is_multimaster_mode; spinlock_t xfer_lock; + struct dma_chan *tx_dma_chan; + struct dma_chan *rx_dma_chan; + dma_addr_t dma_phys; + u32 *dma_buf; + unsigned int dma_buf_size; + bool is_curr_dma_xfer; + struct completion dma_complete; }; static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, @@ -284,6 +356,111 @@ static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask) i2c_writel(i2c_dev, int_mask, I2C_INT_MASK); } +static void tegra_i2c_dma_complete(void *args) +{ + struct tegra_i2c_dev *i2c_dev = args; + + complete(&i2c_dev->dma_complete); +} + +static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len) +{ + struct dma_async_tx_descriptor *dma_desc; + enum dma_transfer_direction dir; + struct dma_chan *chan; + + dev_dbg(i2c_dev->dev, "starting DMA for length: %zu\n", len); + reinit_completion(&i2c_dev->dma_complete); + dir = i2c_dev->msg_read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; + chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan; + dma_desc = dmaengine_prep_slave_single(chan, i2c_dev->dma_phys, + len, dir, DMA_PREP_INTERRUPT | + DMA_CTRL_ACK); + if (!dma_desc) { + dev_err(i2c_dev->dev, "failed to get DMA descriptor\n"); + return -EINVAL; + } + + dma_desc->callback = tegra_i2c_dma_complete; + dma_desc->callback_param = i2c_dev; + dmaengine_submit(dma_desc); + dma_async_issue_pending(chan); + return 0; +} + +static void tegra_i2c_release_dma(struct tegra_i2c_dev *i2c_dev) +{ + if (i2c_dev->dma_buf) { + dma_free_coherent(i2c_dev->dev, i2c_dev->dma_buf_size, + i2c_dev->dma_buf, i2c_dev->dma_phys); + i2c_dev->dma_buf = NULL; + } + + if (i2c_dev->tx_dma_chan) { + dma_release_channel(i2c_dev->tx_dma_chan); + i2c_dev->tx_dma_chan = NULL; + } + + if (i2c_dev->rx_dma_chan) { + dma_release_channel(i2c_dev->rx_dma_chan); + i2c_dev->rx_dma_chan = NULL; + } +} + +static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev) +{ + struct dma_chan *chan; + u32 *dma_buf; + dma_addr_t dma_phys; + int err; + + if (!i2c_dev->hw->has_apb_dma) + return 0; + + if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) { + dev_dbg(i2c_dev->dev, "Support for APB DMA not enabled!\n"); + return 0; + } + + chan = dma_request_slave_channel_reason(i2c_dev->dev, "rx"); + if (IS_ERR(chan)) { + err = PTR_ERR(chan); + goto err_out; + } + + i2c_dev->rx_dma_chan = chan; + + chan = dma_request_slave_channel_reason(i2c_dev->dev, "tx"); + if (IS_ERR(chan)) { + err = PTR_ERR(chan); + goto err_out; + } + + i2c_dev->tx_dma_chan = chan; + + dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size, + &dma_phys, GFP_KERNEL | __GFP_NOWARN); + if (!dma_buf) { + dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n"); + err = -ENOMEM; + goto err_out; + } + + i2c_dev->dma_buf = dma_buf; + i2c_dev->dma_phys = dma_phys; + return 0; + +err_out: + tegra_i2c_release_dma(i2c_dev); + if (err != -EPROBE_DEFER) { + dev_err(i2c_dev->dev, "cannot use DMA: %d\n", err); + dev_err(i2c_dev->dev, "falling back to PIO\n"); + return 0; + } + + return err; +} + static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev) { unsigned long timeout = jiffies + HZ; @@ -518,11 +695,13 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev) return 0; } -static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) +static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit) { u32 val; int err; - u32 clk_divisor; + u32 clk_divisor, clk_multiplier; + u32 tsu_thd = 0; + u8 tlow, thigh; err = pm_runtime_get_sync(i2c_dev->dev); if (err < 0) { @@ -552,6 +731,41 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT; i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR); + if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE && + i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE) { + tlow = i2c_dev->hw->tlow_fast_fastplus_mode; + thigh = i2c_dev->hw->thigh_fast_fastplus_mode; + tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode; + } else { + tlow = i2c_dev->hw->tlow_std_mode; + thigh = i2c_dev->hw->thigh_std_mode; + tsu_thd = i2c_dev->hw->setup_hold_time_std_mode; + } + + if (i2c_dev->hw->has_interface_timing_reg) { + val = (thigh << I2C_THIGH_SHIFT) | tlow; + i2c_writel(i2c_dev, val, I2C_INTERFACE_TIMING_0); + } + + /* + * configure setup and hold times only when tsu_thd is non-zero. + * otherwise, preserve the chip default values + */ + if (i2c_dev->hw->has_interface_timing_reg && tsu_thd) + i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1); + + if (!clk_reinit) { + clk_multiplier = (tlow + thigh + 2); + clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1); + err = clk_set_rate(i2c_dev->div_clk, + i2c_dev->bus_clk_rate * clk_multiplier); + if (err) { + dev_err(i2c_dev->dev, + "failed changing clock rate: %d\n", err); + goto err; + } + } + if (!i2c_dev->is_dvc) { u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG); @@ -561,16 +775,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2); } - if (i2c_dev->hw->has_mst_fifo) { - val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) | - I2C_MST_FIFO_CONTROL_RX_TRIG(1); - i2c_writel(i2c_dev, val, I2C_MST_FIFO_CONTROL); - } else { - val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT | - 0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT; - i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL); - } - err = tegra_i2c_flush_fifos(i2c_dev); if (err) goto err; @@ -643,25 +847,44 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) goto err; } - if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) { - if (i2c_dev->msg_buf_remaining) - tegra_i2c_empty_rx_fifo(i2c_dev); - else - BUG(); - } + /* + * I2C transfer is terminated during the bus clear so skip + * processing the other interrupts. + */ + if (i2c_dev->hw->supports_bus_clear && (status & I2C_INT_BUS_CLR_DONE)) + goto err; - if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) { - if (i2c_dev->msg_buf_remaining) - tegra_i2c_fill_tx_fifo(i2c_dev); - else - tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ); + if (!i2c_dev->is_curr_dma_xfer) { + if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) { + if (i2c_dev->msg_buf_remaining) + tegra_i2c_empty_rx_fifo(i2c_dev); + else + BUG(); + } + + if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) { + if (i2c_dev->msg_buf_remaining) + tegra_i2c_fill_tx_fifo(i2c_dev); + else + tegra_i2c_mask_irq(i2c_dev, + I2C_INT_TX_FIFO_DATA_REQ); + } } i2c_writel(i2c_dev, status, I2C_INT_STATUS); if (i2c_dev->is_dvc) dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); + /* + * During message read XFER_COMPLETE interrupt is triggered prior to + * DMA completion and during message write XFER_COMPLETE interrupt is + * triggered after DMA completion. + * PACKETS_XFER_COMPLETE indicates completion of all bytes of transfer. + * so forcing msg_buf_remaining to 0 in DMA mode. + */ if (status & I2C_INT_PACKET_XFER_COMPLETE) { + if (i2c_dev->is_curr_dma_xfer) + i2c_dev->msg_buf_remaining = 0; BUG_ON(i2c_dev->msg_buf_remaining); complete(&i2c_dev->msg_complete); } @@ -671,16 +894,135 @@ err: tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST | I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ | I2C_INT_RX_FIFO_DATA_REQ); + if (i2c_dev->hw->supports_bus_clear) + tegra_i2c_mask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE); i2c_writel(i2c_dev, status, I2C_INT_STATUS); if (i2c_dev->is_dvc) dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); + if (i2c_dev->is_curr_dma_xfer) { + if (i2c_dev->msg_read) + dmaengine_terminate_async(i2c_dev->rx_dma_chan); + else + dmaengine_terminate_async(i2c_dev->tx_dma_chan); + + complete(&i2c_dev->dma_complete); + } + complete(&i2c_dev->msg_complete); done: spin_unlock(&i2c_dev->xfer_lock); return IRQ_HANDLED; } +static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev, + size_t len) +{ + u32 val, reg; + u8 dma_burst; + struct dma_slave_config slv_config = {0}; + struct dma_chan *chan; + int ret; + unsigned long reg_offset; + + if (i2c_dev->hw->has_mst_fifo) + reg = I2C_MST_FIFO_CONTROL; + else + reg = I2C_FIFO_CONTROL; + + if (i2c_dev->is_curr_dma_xfer) { + if (len & 0xF) + dma_burst = 1; + else if (len & 0x10) + dma_burst = 4; + else + dma_burst = 8; + + if (i2c_dev->msg_read) { + chan = i2c_dev->rx_dma_chan; + reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_RX_FIFO); + slv_config.src_addr = i2c_dev->base_phys + reg_offset; + slv_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + slv_config.src_maxburst = dma_burst; + + if (i2c_dev->hw->has_mst_fifo) + val = I2C_MST_FIFO_CONTROL_RX_TRIG(dma_burst); + else + val = I2C_FIFO_CONTROL_RX_TRIG(dma_burst); + } else { + chan = i2c_dev->tx_dma_chan; + reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_TX_FIFO); + slv_config.dst_addr = i2c_dev->base_phys + reg_offset; + slv_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + slv_config.dst_maxburst = dma_burst; + + if (i2c_dev->hw->has_mst_fifo) + val = I2C_MST_FIFO_CONTROL_TX_TRIG(dma_burst); + else + val = I2C_FIFO_CONTROL_TX_TRIG(dma_burst); + } + + slv_config.device_fc = true; + ret = dmaengine_slave_config(chan, &slv_config); + if (ret < 0) { + dev_err(i2c_dev->dev, "DMA slave config failed: %d\n", + ret); + dev_err(i2c_dev->dev, "falling back to PIO\n"); + tegra_i2c_release_dma(i2c_dev); + i2c_dev->is_curr_dma_xfer = false; + } else { + goto out; + } + } + + if (i2c_dev->hw->has_mst_fifo) + val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) | + I2C_MST_FIFO_CONTROL_RX_TRIG(1); + else + val = I2C_FIFO_CONTROL_TX_TRIG(8) | + I2C_FIFO_CONTROL_RX_TRIG(1); +out: + i2c_writel(i2c_dev, val, reg); +} + +static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap) +{ + struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + int err; + unsigned long time_left; + u32 reg; + + reinit_completion(&i2c_dev->msg_complete); + reg = (I2C_BC_SCLK_THRESHOLD << I2C_BC_SCLK_THRESHOLD_SHIFT) | + I2C_BC_STOP_COND | I2C_BC_TERMINATE; + i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG); + if (i2c_dev->hw->has_config_load_reg) { + err = tegra_i2c_wait_for_config_load(i2c_dev); + if (err) + return err; + } + + reg |= I2C_BC_ENABLE; + i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG); + tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE); + + time_left = wait_for_completion_timeout(&i2c_dev->msg_complete, + msecs_to_jiffies(50)); + if (time_left == 0) { + dev_err(i2c_dev->dev, "timed out for bus clear\n"); + return -ETIMEDOUT; + } + + reg = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS); + if (!(reg & I2C_BC_STATUS)) { + dev_err(i2c_dev->dev, + "un-recovered arbitration lost\n"); + return -EIO; + } + + return -EAGAIN; +} + static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, struct i2c_msg *msg, enum msg_end_type end_state) { @@ -688,6 +1030,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, u32 int_mask; unsigned long time_left; unsigned long flags; + size_t xfer_size; + u32 *buffer = NULL; + int err = 0; + bool dma; + u16 xfer_time = 100; tegra_i2c_flush_fifos(i2c_dev); @@ -697,19 +1044,63 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, i2c_dev->msg_read = (msg->flags & I2C_M_RD); reinit_completion(&i2c_dev->msg_complete); + if (i2c_dev->msg_read) + xfer_size = msg->len; + else + xfer_size = msg->len + I2C_PACKET_HEADER_SIZE; + + xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD); + i2c_dev->is_curr_dma_xfer = (xfer_size > I2C_PIO_MODE_MAX_LEN) && + i2c_dev->dma_buf; + tegra_i2c_config_fifo_trig(i2c_dev, xfer_size); + dma = i2c_dev->is_curr_dma_xfer; + /* + * Transfer time in mSec = Total bits / transfer rate + * Total bits = 9 bits per byte (including ACK bit) + Start & stop bits + */ + xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC, + i2c_dev->bus_clk_rate); spin_lock_irqsave(&i2c_dev->xfer_lock, flags); int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST; tegra_i2c_unmask_irq(i2c_dev, int_mask); + if (dma) { + if (i2c_dev->msg_read) { + dma_sync_single_for_device(i2c_dev->dev, + i2c_dev->dma_phys, + xfer_size, + DMA_FROM_DEVICE); + err = tegra_i2c_dma_submit(i2c_dev, xfer_size); + if (err < 0) { + dev_err(i2c_dev->dev, + "starting RX DMA failed, err %d\n", + err); + goto unlock; + } + + } else { + dma_sync_single_for_cpu(i2c_dev->dev, + i2c_dev->dma_phys, + xfer_size, + DMA_TO_DEVICE); + buffer = i2c_dev->dma_buf; + } + } packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) | PACKET_HEADER0_PROTOCOL_I2C | (i2c_dev->cont_id << PACKET_HEADER0_CONT_ID_SHIFT) | (1 << PACKET_HEADER0_PACKET_ID_SHIFT); - i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); + if (dma && !i2c_dev->msg_read) + *buffer++ = packet_header; + else + i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); packet_header = msg->len - 1; - i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); + if (dma && !i2c_dev->msg_read) + *buffer++ = packet_header; + else + i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); packet_header = I2C_HEADER_IE_ENABLE; if (end_state == MSG_END_CONTINUE) @@ -726,31 +1117,85 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, packet_header |= I2C_HEADER_CONT_ON_NAK; if (msg->flags & I2C_M_RD) packet_header |= I2C_HEADER_READ; - i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); - - if (!(msg->flags & I2C_M_RD)) - tegra_i2c_fill_tx_fifo(i2c_dev); + if (dma && !i2c_dev->msg_read) + *buffer++ = packet_header; + else + i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); + + if (!i2c_dev->msg_read) { + if (dma) { + memcpy(buffer, msg->buf, msg->len); + dma_sync_single_for_device(i2c_dev->dev, + i2c_dev->dma_phys, + xfer_size, + DMA_TO_DEVICE); + err = tegra_i2c_dma_submit(i2c_dev, xfer_size); + if (err < 0) { + dev_err(i2c_dev->dev, + "starting TX DMA failed, err %d\n", + err); + goto unlock; + } + } else { + tegra_i2c_fill_tx_fifo(i2c_dev); + } + } if (i2c_dev->hw->has_per_pkt_xfer_complete_irq) int_mask |= I2C_INT_PACKET_XFER_COMPLETE; - if (msg->flags & I2C_M_RD) - int_mask |= I2C_INT_RX_FIFO_DATA_REQ; - else if (i2c_dev->msg_buf_remaining) - int_mask |= I2C_INT_TX_FIFO_DATA_REQ; + if (!dma) { + if (msg->flags & I2C_M_RD) + int_mask |= I2C_INT_RX_FIFO_DATA_REQ; + else if (i2c_dev->msg_buf_remaining) + int_mask |= I2C_INT_TX_FIFO_DATA_REQ; + } tegra_i2c_unmask_irq(i2c_dev, int_mask); - spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags); dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n", i2c_readl(i2c_dev, I2C_INT_MASK)); +unlock: + spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags); + + if (dma) { + if (err) + return err; + + time_left = wait_for_completion_timeout( + &i2c_dev->dma_complete, + msecs_to_jiffies(xfer_time)); + if (time_left == 0) { + dev_err(i2c_dev->dev, "DMA transfer timeout\n"); + dmaengine_terminate_sync(i2c_dev->msg_read ? + i2c_dev->rx_dma_chan : + i2c_dev->tx_dma_chan); + tegra_i2c_init(i2c_dev, true); + return -ETIMEDOUT; + } + + if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) { + dma_sync_single_for_cpu(i2c_dev->dev, + i2c_dev->dma_phys, + xfer_size, + DMA_FROM_DEVICE); + memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, + msg->len); + } + + if (i2c_dev->msg_err != I2C_ERR_NONE) + dmaengine_synchronize(i2c_dev->msg_read ? + i2c_dev->rx_dma_chan : + i2c_dev->tx_dma_chan); + } + time_left = wait_for_completion_timeout(&i2c_dev->msg_complete, - TEGRA_I2C_TIMEOUT); + msecs_to_jiffies(xfer_time)); tegra_i2c_mask_irq(i2c_dev, int_mask); if (time_left == 0) { dev_err(i2c_dev->dev, "i2c transfer timed out\n"); - tegra_i2c_init(i2c_dev); + tegra_i2c_init(i2c_dev, true); return -ETIMEDOUT; } @@ -758,10 +1203,18 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, time_left, completion_done(&i2c_dev->msg_complete), i2c_dev->msg_err); + i2c_dev->is_curr_dma_xfer = false; if (likely(i2c_dev->msg_err == I2C_ERR_NONE)) return 0; - tegra_i2c_init(i2c_dev); + tegra_i2c_init(i2c_dev, true); + /* start recovery upon arbitration loss in single master mode */ + if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) { + if (!i2c_dev->is_multimaster_mode) + return i2c_recover_bus(&i2c_dev->adapter); + return -EAGAIN; + } + if (i2c_dev->msg_err == I2C_ERR_NO_ACK) { if (msg->flags & I2C_M_IGNORE_NAK) return 0; @@ -836,12 +1289,17 @@ static const struct i2c_algorithm tegra_i2c_algo = { /* payload size is only 12 bit */ static const struct i2c_adapter_quirks tegra_i2c_quirks = { .flags = I2C_AQ_NO_ZERO_LEN, - .max_read_len = 4096, - .max_write_len = 4096, + .max_read_len = SZ_4K, + .max_write_len = SZ_4K - I2C_PACKET_HEADER_SIZE, }; static const struct i2c_adapter_quirks tegra194_i2c_quirks = { .flags = I2C_AQ_NO_ZERO_LEN, + .max_write_len = SZ_64K - I2C_PACKET_HEADER_SIZE, +}; + +static struct i2c_bus_recovery_info tegra_i2c_recovery_info = { + .recover_bus = tegra_i2c_issue_bus_clear, }; static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { @@ -849,13 +1307,24 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_per_pkt_xfer_complete_irq = false, .has_single_clk_source = false, .clk_divisor_hs_mode = 3, - .clk_divisor_std_fast_mode = 0, + .clk_divisor_std_mode = 0, + .clk_divisor_fast_mode = 0, .clk_divisor_fast_plus_mode = 0, .has_config_load_reg = false, .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, + .supports_bus_clear = false, + .has_apb_dma = true, + .tlow_std_mode = 0x4, + .thigh_std_mode = 0x2, + .tlow_fast_fastplus_mode = 0x4, + .thigh_fast_fastplus_mode = 0x2, + .setup_hold_time_std_mode = 0x0, + .setup_hold_time_fast_fast_plus_mode = 0x0, + .setup_hold_time_hs_mode = 0x0, + .has_interface_timing_reg = false, }; static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { @@ -863,13 +1332,24 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { .has_per_pkt_xfer_complete_irq = false, .has_single_clk_source = false, .clk_divisor_hs_mode = 3, - .clk_divisor_std_fast_mode = 0, + .clk_divisor_std_mode = 0, + .clk_divisor_fast_mode = 0, .clk_divisor_fast_plus_mode = 0, .has_config_load_reg = false, .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, + .supports_bus_clear = false, + .has_apb_dma = true, + .tlow_std_mode = 0x4, + .thigh_std_mode = 0x2, + .tlow_fast_fastplus_mode = 0x4, + .thigh_fast_fastplus_mode = 0x2, + .setup_hold_time_std_mode = 0x0, + .setup_hold_time_fast_fast_plus_mode = 0x0, + .setup_hold_time_hs_mode = 0x0, + .has_interface_timing_reg = false, }; static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { @@ -877,13 +1357,24 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { .has_per_pkt_xfer_complete_irq = true, .has_single_clk_source = true, .clk_divisor_hs_mode = 1, - .clk_divisor_std_fast_mode = 0x19, + .clk_divisor_std_mode = 0x19, + .clk_divisor_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = false, .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, + .supports_bus_clear = true, + .has_apb_dma = true, + .tlow_std_mode = 0x4, + .thigh_std_mode = 0x2, + .tlow_fast_fastplus_mode = 0x4, + .thigh_fast_fastplus_mode = 0x2, + .setup_hold_time_std_mode = 0x0, + .setup_hold_time_fast_fast_plus_mode = 0x0, + .setup_hold_time_hs_mode = 0x0, + .has_interface_timing_reg = false, }; static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { @@ -891,13 +1382,24 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { .has_per_pkt_xfer_complete_irq = true, .has_single_clk_source = true, .clk_divisor_hs_mode = 1, - .clk_divisor_std_fast_mode = 0x19, + .clk_divisor_std_mode = 0x19, + .clk_divisor_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = true, .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, + .supports_bus_clear = true, + .has_apb_dma = true, + .tlow_std_mode = 0x4, + .thigh_std_mode = 0x2, + .tlow_fast_fastplus_mode = 0x4, + .thigh_fast_fastplus_mode = 0x2, + .setup_hold_time_std_mode = 0x0, + .setup_hold_time_fast_fast_plus_mode = 0x0, + .setup_hold_time_hs_mode = 0x0, + .has_interface_timing_reg = true, }; static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { @@ -905,32 +1407,80 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { .has_per_pkt_xfer_complete_irq = true, .has_single_clk_source = true, .clk_divisor_hs_mode = 1, - .clk_divisor_std_fast_mode = 0x19, + .clk_divisor_std_mode = 0x19, + .clk_divisor_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = true, - .has_multi_master_mode = true, + .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, + .supports_bus_clear = true, + .has_apb_dma = true, + .tlow_std_mode = 0x4, + .thigh_std_mode = 0x2, + .tlow_fast_fastplus_mode = 0x4, + .thigh_fast_fastplus_mode = 0x2, + .setup_hold_time_std_mode = 0, + .setup_hold_time_fast_fast_plus_mode = 0, + .setup_hold_time_hs_mode = 0, + .has_interface_timing_reg = true, }; -static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { +static const struct tegra_i2c_hw_feature tegra186_i2c_hw = { .has_continue_xfer_support = true, .has_per_pkt_xfer_complete_irq = true, .has_single_clk_source = true, .clk_divisor_hs_mode = 1, - .clk_divisor_std_fast_mode = 0x19, + .clk_divisor_std_mode = 0x16, + .clk_divisor_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = true, + .has_multi_master_mode = false, + .has_slcg_override_reg = true, + .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, + .supports_bus_clear = true, + .has_apb_dma = false, + .tlow_std_mode = 0x4, + .thigh_std_mode = 0x3, + .tlow_fast_fastplus_mode = 0x4, + .thigh_fast_fastplus_mode = 0x2, + .setup_hold_time_std_mode = 0, + .setup_hold_time_fast_fast_plus_mode = 0, + .setup_hold_time_hs_mode = 0, + .has_interface_timing_reg = true, +}; + +static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { + .has_continue_xfer_support = true, + .has_per_pkt_xfer_complete_irq = true, + .has_single_clk_source = true, + .clk_divisor_hs_mode = 1, + .clk_divisor_std_mode = 0x4f, + .clk_divisor_fast_mode = 0x3c, + .clk_divisor_fast_plus_mode = 0x16, + .has_config_load_reg = true, .has_multi_master_mode = true, .has_slcg_override_reg = true, .has_mst_fifo = true, .quirks = &tegra194_i2c_quirks, + .supports_bus_clear = true, + .has_apb_dma = false, + .tlow_std_mode = 0x8, + .thigh_std_mode = 0x7, + .tlow_fast_fastplus_mode = 0x2, + .thigh_fast_fastplus_mode = 0x2, + .setup_hold_time_std_mode = 0x08080808, + .setup_hold_time_fast_fast_plus_mode = 0x02020202, + .setup_hold_time_hs_mode = 0x090909, + .has_interface_timing_reg = true, }; /* Match table for of_platform binding */ static const struct of_device_id tegra_i2c_of_match[] = { { .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, }, + { .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, }, { .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, }, { .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, }, { .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, }, @@ -948,11 +1498,12 @@ static int tegra_i2c_probe(struct platform_device *pdev) struct clk *div_clk; struct clk *fast_clk; void __iomem *base; + phys_addr_t base_phys; int irq; int ret = 0; - int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base_phys = res->start; base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); @@ -975,8 +1526,11 @@ static int tegra_i2c_probe(struct platform_device *pdev) return -ENOMEM; i2c_dev->base = base; + i2c_dev->base_phys = base_phys; i2c_dev->div_clk = div_clk; i2c_dev->adapter.algo = &tegra_i2c_algo; + i2c_dev->adapter.retries = 1; + i2c_dev->adapter.timeout = 6 * HZ; i2c_dev->irq = irq; i2c_dev->cont_id = pdev->id; i2c_dev->dev = &pdev->dev; @@ -993,7 +1547,10 @@ static int tegra_i2c_probe(struct platform_device *pdev) i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node, "nvidia,tegra20-i2c-dvc"); i2c_dev->adapter.quirks = i2c_dev->hw->quirks; + i2c_dev->dma_buf_size = i2c_dev->adapter.quirks->max_write_len + + I2C_PACKET_HEADER_SIZE; init_completion(&i2c_dev->msg_complete); + init_completion(&i2c_dev->dma_complete); spin_lock_init(&i2c_dev->xfer_lock); if (!i2c_dev->hw->has_single_clk_source) { @@ -1015,20 +1572,17 @@ static int tegra_i2c_probe(struct platform_device *pdev) } } - i2c_dev->clk_divisor_non_hs_mode = - i2c_dev->hw->clk_divisor_std_fast_mode; - if (i2c_dev->hw->clk_divisor_fast_plus_mode && - (i2c_dev->bus_clk_rate == 1000000)) + if (i2c_dev->bus_clk_rate > I2C_FAST_MODE && + i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE) i2c_dev->clk_divisor_non_hs_mode = - i2c_dev->hw->clk_divisor_fast_plus_mode; - - clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1); - ret = clk_set_rate(i2c_dev->div_clk, - i2c_dev->bus_clk_rate * clk_multiplier); - if (ret) { - dev_err(i2c_dev->dev, "Clock rate change failed %d\n", ret); - goto unprepare_fast_clk; - } + i2c_dev->hw->clk_divisor_fast_plus_mode; + else if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE && + i2c_dev->bus_clk_rate <= I2C_FAST_MODE) + i2c_dev->clk_divisor_non_hs_mode = + i2c_dev->hw->clk_divisor_fast_mode; + else + i2c_dev->clk_divisor_non_hs_mode = + i2c_dev->hw->clk_divisor_std_mode; ret = clk_prepare(i2c_dev->div_clk); if (ret < 0) { @@ -1054,17 +1608,24 @@ static int tegra_i2c_probe(struct platform_device *pdev) } } - ret = tegra_i2c_init(i2c_dev); + if (i2c_dev->hw->supports_bus_clear) + i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info; + + ret = tegra_i2c_init_dma(i2c_dev); + if (ret < 0) + goto disable_div_clk; + + ret = tegra_i2c_init(i2c_dev, false); if (ret) { dev_err(&pdev->dev, "Failed to initialize i2c controller\n"); - goto disable_div_clk; + goto release_dma; } ret = devm_request_irq(&pdev->dev, i2c_dev->irq, tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); - goto disable_div_clk; + goto release_dma; } i2c_set_adapdata(&i2c_dev->adapter, i2c_dev); @@ -1078,10 +1639,13 @@ static int tegra_i2c_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c_dev->adapter); if (ret) - goto disable_div_clk; + goto release_dma; return 0; +release_dma: + tegra_i2c_release_dma(i2c_dev); + disable_div_clk: if (i2c_dev->is_multimaster_mode) clk_disable(i2c_dev->div_clk); @@ -1118,6 +1682,7 @@ static int tegra_i2c_remove(struct platform_device *pdev) if (!i2c_dev->hw->has_single_clk_source) clk_unprepare(i2c_dev->fast_clk); + tegra_i2c_release_dma(i2c_dev); return 0; } @@ -1141,18 +1706,7 @@ static struct platform_driver tegra_i2c_driver = { }, }; -static int __init tegra_i2c_init_driver(void) -{ - return platform_driver_register(&tegra_i2c_driver); -} - -static void __exit tegra_i2c_exit_driver(void) -{ - platform_driver_unregister(&tegra_i2c_driver); -} - -subsys_initcall(tegra_i2c_init_driver); -module_exit(tegra_i2c_exit_driver); +module_platform_driver(tegra_i2c_driver); MODULE_DESCRIPTION("nVidia Tegra2 I2C Bus Controller driver"); MODULE_AUTHOR("Colin Cross"); diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c index b8f9e020d80e..7b98d97da3c6 100644 --- a/drivers/i2c/busses/i2c-zx2967.c +++ b/drivers/i2c/busses/i2c-zx2967.c @@ -66,7 +66,6 @@ struct zx2967_i2c { int msg_rd; u8 *cur_trans; u8 access_cnt; - bool is_suspended; int error; }; @@ -313,9 +312,6 @@ static int zx2967_i2c_xfer(struct i2c_adapter *adap, int ret; int i; - if (i2c->is_suspended) - return -EBUSY; - zx2967_set_addr(i2c, msgs->addr); for (i = 0; i < num; i++) { @@ -470,7 +466,7 @@ static int __maybe_unused zx2967_i2c_suspend(struct device *dev) { struct zx2967_i2c *i2c = dev_get_drvdata(dev); - i2c->is_suspended = true; + i2c_mark_adapter_suspended(&i2c->adap); clk_disable_unprepare(i2c->clk); return 0; @@ -480,8 +476,8 @@ static int __maybe_unused zx2967_i2c_resume(struct device *dev) { struct zx2967_i2c *i2c = dev_get_drvdata(dev); - i2c->is_suspended = false; clk_prepare_enable(i2c->clk); + i2c_mark_adapter_resumed(&i2c->adap); return 0; } diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 28460f6a60cc..cb6c5cb0df0b 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -430,7 +430,7 @@ static int i2c_device_remove(struct device *dev) dev_pm_clear_wake_irq(&client->dev); device_init_wakeup(&client->dev, false); - client->irq = 0; + client->irq = client->init_irq; return status; } @@ -741,10 +741,11 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->flags = info->flags; client->addr = info->addr; - client->irq = info->irq; - if (!client->irq) - client->irq = i2c_dev_irq_from_resources(info->resources, + client->init_irq = info->irq; + if (!client->init_irq) + client->init_irq = i2c_dev_irq_from_resources(info->resources, info->num_resources); + client->irq = client->init_irq; strlcpy(client->name, info->type, sizeof(client->name)); @@ -1232,6 +1233,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap) if (!adap->lock_ops) adap->lock_ops = &i2c_adapter_lock_ops; + adap->locked_flags = 0; rt_mutex_init(&adap->bus_lock); rt_mutex_init(&adap->mux_lock); mutex_init(&adap->userspace_clients_lock); @@ -1865,6 +1867,8 @@ int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if (WARN_ON(!msgs || num < 1)) return -EINVAL; + if (WARN_ON(test_bit(I2C_ALF_IS_SUSPENDED, &adap->locked_flags))) + return -ESHUTDOWN; if (adap->quirks && i2c_check_for_quirks(adap, msgs, num)) return -EOPNOTSUPP; diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c index 6cb7ad608bcd..0f01cdba9d2c 100644 --- a/drivers/i2c/i2c-core-of.c +++ b/drivers/i2c/i2c-core-of.c @@ -121,6 +121,17 @@ static int of_dev_node_match(struct device *dev, void *data) return dev->of_node == data; } +static int of_dev_or_parent_node_match(struct device *dev, void *data) +{ + if (dev->of_node == data) + return 1; + + if (dev->parent) + return dev->parent->of_node == data; + + return 0; +} + /* must call put_device() when done with returned i2c_client device */ struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) { @@ -145,7 +156,8 @@ struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) struct device *dev; struct i2c_adapter *adapter; - dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match); + dev = bus_find_device(&i2c_bus_type, NULL, node, + of_dev_or_parent_node_match); if (!dev) return NULL; diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 9cd66cabb84f..132119112596 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -585,7 +585,7 @@ s32 __i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, trace: /* If enabled, the reply tracepoint is conditional on read_write. */ trace_smbus_reply(adapter, addr, flags, read_write, - command, protocol, data); + command, protocol, data, res); trace_smbus_result(adapter, addr, flags, read_write, command, protocol, res); diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index ccd76c71af09..3f7b9af11137 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -52,7 +52,7 @@ struct i2c_dev { struct cdev cdev; }; -#define I2C_MINORS MINORMASK +#define I2C_MINORS (MINORMASK + 1) static LIST_HEAD(i2c_dev_list); static DEFINE_SPINLOCK(i2c_dev_list_lock); diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index ddfcf4ade7bf..63aa541c9608 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -22,10 +22,24 @@ #include <linux/i2c.h> #include <linux/nvmem-provider.h> #include <linux/regmap.h> -#include <linux/platform_data/at24.h> #include <linux/pm_runtime.h> #include <linux/gpio/consumer.h> +/* Address pointer is 16 bit. */ +#define AT24_FLAG_ADDR16 BIT(7) +/* sysfs-entry will be read-only. */ +#define AT24_FLAG_READONLY BIT(6) +/* sysfs-entry will be world-readable. */ +#define AT24_FLAG_IRUGO BIT(5) +/* Take always 8 addresses (24c00). */ +#define AT24_FLAG_TAKE8ADDR BIT(4) +/* Factory-programmed serial number. */ +#define AT24_FLAG_SERIAL BIT(3) +/* Factory-programmed mac address. */ +#define AT24_FLAG_MAC BIT(2) +/* Does not auto-rollover reads to the next slave address. */ +#define AT24_FLAG_NO_RDROL BIT(1) + /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. * Differences between different vendor product lines (like Atmel AT24C or @@ -107,10 +121,6 @@ module_param_named(write_timeout, at24_write_timeout, uint, 0); MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); struct at24_chip_data { - /* - * these fields mirror their equivalents in - * struct at24_platform_data - */ u32 byte_len; u8 flags; }; @@ -471,63 +481,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) return 0; } -static void at24_properties_to_pdata(struct device *dev, - struct at24_platform_data *chip) -{ - int err; - u32 val; - - if (device_property_present(dev, "read-only")) - chip->flags |= AT24_FLAG_READONLY; - if (device_property_present(dev, "no-read-rollover")) - chip->flags |= AT24_FLAG_NO_RDROL; - - err = device_property_read_u32(dev, "address-width", &val); - if (!err) { - switch (val) { - case 8: - if (chip->flags & AT24_FLAG_ADDR16) - dev_warn(dev, "Override address width to be 8, while default is 16\n"); - chip->flags &= ~AT24_FLAG_ADDR16; - break; - case 16: - chip->flags |= AT24_FLAG_ADDR16; - break; - default: - dev_warn(dev, "Bad \"address-width\" property: %u\n", - val); - } - } - - err = device_property_read_u32(dev, "size", &val); - if (!err) - chip->byte_len = val; - - err = device_property_read_u32(dev, "pagesize", &val); - if (!err) { - chip->page_size = val; - } else { - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip->page_size = 1; - } -} - -static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) +static const struct at24_chip_data *at24_get_chip_data(struct device *dev) { struct device_node *of_node = dev->of_node; const struct at24_chip_data *cdata; const struct i2c_device_id *id; - struct at24_platform_data *pd; - - pd = dev_get_platdata(dev); - if (pd) { - memcpy(pdata, pd, sizeof(*pdata)); - return 0; - } id = i2c_match_id(at24_ids, to_i2c_client(dev)); @@ -544,13 +502,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) cdata = acpi_device_get_match_data(dev); if (!cdata) - return -ENODEV; + return ERR_PTR(-ENODEV); - pdata->byte_len = cdata->byte_len; - pdata->flags = cdata->flags; - at24_properties_to_pdata(dev, pdata); - - return 0; + return cdata; } static void at24_remove_dummy_clients(struct at24_data *at24) @@ -619,7 +573,8 @@ static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; struct nvmem_config nvmem_config = { }; - struct at24_platform_data pdata = { }; + u32 byte_len, page_size, flags, addrw; + const struct at24_chip_data *cdata; struct device *dev = &client->dev; bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; @@ -634,35 +589,75 @@ static int at24_probe(struct i2c_client *client) i2c_fn_block = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK); - err = at24_get_pdata(dev, &pdata); + cdata = at24_get_chip_data(dev); + if (IS_ERR(cdata)) + return PTR_ERR(cdata); + + err = device_property_read_u32(dev, "pagesize", &page_size); + if (err) + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + page_size = 1; + + flags = cdata->flags; + if (device_property_present(dev, "read-only")) + flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + flags |= AT24_FLAG_NO_RDROL; + + err = device_property_read_u32(dev, "address-width", &addrw); + if (!err) { + switch (addrw) { + case 8: + if (flags & AT24_FLAG_ADDR16) + dev_warn(dev, + "Override address width to be 8, while default is 16\n"); + flags &= ~AT24_FLAG_ADDR16; + break; + case 16: + flags |= AT24_FLAG_ADDR16; + break; + default: + dev_warn(dev, "Bad \"address-width\" property: %u\n", + addrw); + } + } + + err = device_property_read_u32(dev, "size", &byte_len); if (err) - return err; + byte_len = cdata->byte_len; if (!i2c_fn_i2c && !i2c_fn_block) - pdata.page_size = 1; + page_size = 1; - if (!pdata.page_size) { + if (!page_size) { dev_err(dev, "page_size must not be 0!\n"); return -EINVAL; } - if (!is_power_of_2(pdata.page_size)) + if (!is_power_of_2(page_size)) dev_warn(dev, "page_size looks suspicious (no power of 2)!\n"); - if (pdata.flags & AT24_FLAG_TAKE8ADDR) - num_addresses = 8; - else - num_addresses = DIV_ROUND_UP(pdata.byte_len, - (pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + err = device_property_read_u32(dev, "num-addresses", &num_addresses); + if (err) { + if (flags & AT24_FLAG_TAKE8ADDR) + num_addresses = 8; + else + num_addresses = DIV_ROUND_UP(byte_len, + (flags & AT24_FLAG_ADDR16) ? 65536 : 256); + } - if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) { + if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) { dev_err(dev, "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); return -EINVAL; } regmap_config.val_bits = 8; - regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8; + regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8; regmap_config.disable_locking = true; regmap = devm_regmap_init_i2c(client, ®map_config); @@ -675,11 +670,11 @@ static int at24_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&at24->lock); - at24->byte_len = pdata.byte_len; - at24->page_size = pdata.page_size; - at24->flags = pdata.flags; + at24->byte_len = byte_len; + at24->page_size = page_size; + at24->flags = flags; at24->num_addresses = num_addresses; - at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len); + at24->offset_adj = at24_get_offset_adj(flags, byte_len); at24->client[0].client = client; at24->client[0].regmap = regmap; @@ -687,10 +682,10 @@ static int at24_probe(struct i2c_client *client) if (IS_ERR(at24->wp_gpio)) return PTR_ERR(at24->wp_gpio); - writable = !(pdata.flags & AT24_FLAG_READONLY); + writable = !(flags & AT24_FLAG_READONLY); if (writable) { at24->write_max = min_t(unsigned int, - pdata.page_size, at24_io_limit); + page_size, at24_io_limit); if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; } @@ -733,7 +728,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.priv = at24; nvmem_config.stride = 1; nvmem_config.word_size = 1; - nvmem_config.size = pdata.byte_len; + nvmem_config.size = byte_len; at24->nvmem = devm_nvmem_register(dev, &nvmem_config); if (IS_ERR(at24->nvmem)) { @@ -742,13 +737,9 @@ static int at24_probe(struct i2c_client *client) } dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n", - pdata.byte_len, client->name, + byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); - /* export data to kernel code */ - if (pdata.setup) - pdata.setup(at24->nvmem, pdata.context); - return 0; err_clients: diff --git a/include/linux/acpi.h b/include/linux/acpi.h index dca5f244d63d..6ac47f5ea514 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -1061,17 +1061,6 @@ static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index) } #endif -#if defined(CONFIG_ACPI) && IS_ENABLED(CONFIG_I2C) -bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, - struct acpi_resource_i2c_serialbus **i2c); -#else -static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, - struct acpi_resource_i2c_serialbus **i2c) -{ - return false; -} -#endif - /* Device properties */ #ifdef CONFIG_ACPI diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index 63904ba6887e..69045df78e2d 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -1,30 +1,17 @@ -/* ------------------------------------------------------------------------- */ -/* i2c-algo-bit.h i2c driver algorithms for bit-shift adapters */ -/* ------------------------------------------------------------------------- */ -/* Copyright (C) 1995-99 Simon G. Vogl - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - MA 02110-1301 USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even - Frodo Looijaard <frodol@dds.nl> */ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * i2c-algo-bit.h: i2c driver algorithms for bit-shift adapters + * + * Copyright (C) 1995-99 Simon G. Vogl + * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even + * Frodo Looijaard <frodol@dds.nl> + */ #ifndef _LINUX_I2C_ALGO_BIT_H #define _LINUX_I2C_ALGO_BIT_H +#include <linux/i2c.h> + /* --- Defines for bit-adapters --------------------------------------- */ /* * This struct contains the hw-dependent functions of bit-style adapters to diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 65b4eaed1d96..383510b4f083 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -333,6 +333,7 @@ struct i2c_client { char name[I2C_NAME_SIZE]; struct i2c_adapter *adapter; /* the adapter we sit on */ struct device dev; /* the device structure */ + int init_irq; /* irq set at initialization */ int irq; /* irq issued by device */ struct list_head detected; #if IS_ENABLED(CONFIG_I2C_SLAVE) @@ -680,6 +681,8 @@ struct i2c_adapter { int timeout; /* in jiffies */ int retries; struct device dev; /* the adapter device */ + unsigned long locked_flags; /* owned by the I2C core */ +#define I2C_ALF_IS_SUSPENDED 0 int nr; char name[48]; @@ -762,6 +765,38 @@ i2c_unlock_bus(struct i2c_adapter *adapter, unsigned int flags) adapter->lock_ops->unlock_bus(adapter, flags); } +/** + * i2c_mark_adapter_suspended - Report suspended state of the adapter to the core + * @adap: Adapter to mark as suspended + * + * When using this helper to mark an adapter as suspended, the core will reject + * further transfers to this adapter. The usage of this helper is optional but + * recommended for devices having distinct handlers for system suspend and + * runtime suspend. More complex devices are free to implement custom solutions + * to reject transfers when suspended. + */ +static inline void i2c_mark_adapter_suspended(struct i2c_adapter *adap) +{ + i2c_lock_bus(adap, I2C_LOCK_ROOT_ADAPTER); + set_bit(I2C_ALF_IS_SUSPENDED, &adap->locked_flags); + i2c_unlock_bus(adap, I2C_LOCK_ROOT_ADAPTER); +} + +/** + * i2c_mark_adapter_resumed - Report resumed state of the adapter to the core + * @adap: Adapter to mark as resumed + * + * When using this helper to mark an adapter as resumed, the core will allow + * further transfers to this adapter. See also further notes to + * @i2c_mark_adapter_suspended(). + */ +static inline void i2c_mark_adapter_resumed(struct i2c_adapter *adap) +{ + i2c_lock_bus(adap, I2C_LOCK_ROOT_ADAPTER); + clear_bit(I2C_ALF_IS_SUSPENDED, &adap->locked_flags); + i2c_unlock_bus(adap, I2C_LOCK_ROOT_ADAPTER); +} + /*flags for the client struct: */ #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ @@ -933,11 +968,21 @@ static inline int of_i2c_get_board_info(struct device *dev, #endif /* CONFIG_OF */ +struct acpi_resource; +struct acpi_resource_i2c_serialbus; + #if IS_ENABLED(CONFIG_ACPI) +bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, + struct acpi_resource_i2c_serialbus **i2c); u32 i2c_acpi_find_bus_speed(struct device *dev); struct i2c_client *i2c_acpi_new_device(struct device *dev, int index, struct i2c_board_info *info); #else +static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, + struct acpi_resource_i2c_serialbus **i2c) +{ + return false; +} static inline u32 i2c_acpi_find_bus_speed(struct device *dev) { return 0; diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include <linux/types.h> -#include <linux/nvmem-consumer.h> -#include <linux/bitops.h> - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ diff --git a/include/linux/platform_data/i2c-cbus-gpio.h b/include/linux/platform_data/i2c-cbus-gpio.h deleted file mode 100644 index 6faa992a9502..000000000000 --- a/include/linux/platform_data/i2c-cbus-gpio.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * i2c-cbus-gpio.h - CBUS I2C platform_data definition - * - * Copyright (C) 2004-2009 Nokia Corporation - * - * Written by Felipe Balbi and Aaro Koskinen. - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H -#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H - -struct i2c_cbus_platform_data { - int dat_gpio; - int clk_gpio; - int sel_gpio; -}; - -#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */ diff --git a/include/linux/platform_data/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h index 113d6b12f650..e6326cbafe59 100644 --- a/include/linux/platform_data/i2c-ocores.h +++ b/include/linux/platform_data/i2c-ocores.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * i2c-ocores.h - definitions for the i2c-ocores interface * * Peter Korsgaard <peter@korsgaard.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #ifndef _LINUX_I2C_OCORES_H @@ -15,6 +12,7 @@ struct ocores_i2c_platform_data { u32 reg_shift; /* register offset shift value */ u32 reg_io_width; /* register io read/write width */ u32 clock_khz; /* input clock in kHz */ + u32 bus_khz; /* bus clock in kHz */ bool big_endian; /* registers are big endian */ u8 num_devices; /* number of devices in the devices list */ struct i2c_board_info const *devices; /* devices connected to the bus */ diff --git a/include/trace/events/smbus.h b/include/trace/events/smbus.h index d2fb6e1d3e10..a4892a187842 100644 --- a/include/trace/events/smbus.h +++ b/include/trace/events/smbus.h @@ -138,9 +138,9 @@ TRACE_EVENT_CONDITION(smbus_reply, TP_PROTO(const struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int protocol, - const union i2c_smbus_data *data), - TP_ARGS(adap, addr, flags, read_write, command, protocol, data), - TP_CONDITION(read_write == I2C_SMBUS_READ), + const union i2c_smbus_data *data, int res), + TP_ARGS(adap, addr, flags, read_write, command, protocol, data, res), + TP_CONDITION(res >= 0 && read_write == I2C_SMBUS_READ), TP_STRUCT__entry( __field(int, adapter_nr ) __field(__u16, addr ) |