Merge tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Microsemi Ocelot reset support

 - Spreadtrum SC27xx reset support

 - generic gpio charger: lot's of cleanups

 - axp20x fuel gauge: add AXP813 support

 - misc fixes, including one devicetree change for the Nokia N900, that
   has been Acked-by Tony Lindgren

* tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (27 commits)
  power: reset: at91-reset: Switch from the pr_*() to the dev_*() logging functions
  power: reset: at91-poweroff: Remove redundant dev_err call in at91_poweroff_probe()
  power: reset: at91-poweroff: Switch from the pr_*() to the dev_*() logging functions
  power: reset: make function sc27xx_poweroff_shutdown static
  power: supply: da9150-fg: remove VLA usage
  ARM: dts: omap3-n900: Add link between battery and charger
  power: supply: bq2415x: add DT referencing support
  power: supply: bq27xxx: support missing supplier device
  max17042: propagate of_node to power supply device
  power: supply: axp288_fuel_gauge: Fix full status reporting
  power: supply: axp288_fuel_gauge: Do not register FG on ECS EF20EA
  power: reset: gpio-poweroff: Support for timeout from device property
  dt-bindings: power: reset: gpio-poweroff: Add 'timeout-ms' property
  power: reset: Add Spreadtrum SC27xx PMIC power off support
  power: supply: axp20x_battery: add support for AXP813
  dt-bindings: power: supply: axp20x: add AXP813 battery DT binding
  power: supply: axp20x_battery: use data struct for variant specific code
  power: supply: gpio-charger: Remove pdata from gpio_charger
  power: supply: gpio-charger: Use GPIOF_ACTIVE_LOW for legacy setup
  power: supply: gpio-charger: Remove redundant dev_err call in probe function
  ...

20 files changed, 500 insertions, 201 deletions

diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
index e62d53d844cc..6d8980c18c34 100644
--- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
@@ -27,10 +27,13 @@ Optional properties:
   it to an output when the power-off handler is called. If this optional
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
+- timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
+              specified, 3000 ms is used.
 
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
 	gpios = <&gpio 4 0>;
+	timeout-ms = <3000>;
 };
diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
new file mode 100644
index 000000000000..1b4213eb3473
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
@@ -0,0 +1,14 @@
+Microsemi Ocelot reset controller
+
+The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
+SoC MIPS core.
+
+Required Properties:
+ - compatible: "mscc,ocelot-chip-reset"
+
+Example:
+	reset@1070008 {
+		compatible = "mscc,ocelot-chip-reset";
+		reg = <0x1070008 0x4>;
+	};
+
diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
index c24886676a60..41916f69902c 100644
--- a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
+++ b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
@@ -4,12 +4,12 @@ Required Properties:
  - compatible, one of:
 			"x-powers,axp209-battery-power-supply"
 			"x-powers,axp221-battery-power-supply"
+			"x-powers,axp813-battery-power-supply"
 
-This node is a subnode of the axp20x/axp22x PMIC.
+This node is a subnode of its respective PMIC DT node.
 
-The AXP20X and AXP22X can read the battery voltage, charge and discharge
-currents of the battery by reading ADC channels from the AXP20X/AXP22X
-ADC.
+The supported devices can read the battery voltage, charge and discharge
+currents of the battery by reading ADC channels from the ADC.
 
 Example:
 
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index ab930581fc7a..182a53991c90 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -673,6 +673,7 @@
 	bq27200: bq27200@55 {
 		compatible = "ti,bq27200";
 		reg = <0x55>;
+		power-supplies = <&bq24150a>;
 	};
 
 	/* Stereo headphone amplifier */
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index a102e74ab24e..df58fc878b3e 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -104,6 +104,13 @@ config POWER_RESET_MSM
 	help
 	  Power off and restart support for Qualcomm boards.
 
+config POWER_RESET_OCELOT_RESET
+	bool "Microsemi Ocelot reset driver"
+	depends on MSCC_OCELOT || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  This driver supports restart for Microsemi Ocelot SoC.
+
 config POWER_RESET_PIIX4_POWEROFF
 	tristate "Intel PIIX4 power-off driver"
 	depends on PCI
@@ -218,5 +225,14 @@ config SYSCON_REBOOT_MODE
 	  register, then the bootloader can read it to take different
 	  action according to the mode.
 
+config POWER_RESET_SC27XX
+	bool "Spreadtrum SC27xx PMIC power-off driver"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	help
+	  This driver supports powering off a system through
+	  Spreadtrum SC27xx series PMICs. The SC27xx series
+	  PMICs includes the SC2720, SC2721, SC2723, SC2730
+	  and SC2731 chips.
+
 endif
 
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index dcc92f5f7a37..7778c7485cf1 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
 obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
@@ -26,3 +27,4 @@ obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
 obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
 obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
 obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
+obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c
index c30c40193aaa..fb2fc8f741a1 100644
--- a/drivers/power/reset/at91-poweroff.c
+++ b/drivers/power/reset/at91-poweroff.c
@@ -55,10 +55,10 @@ static void __iomem *at91_shdwc_base;
 static struct clk *sclk;
 static void __iomem *mpddrc_base;
 
-static void __init at91_wakeup_status(void)
+static void __init at91_wakeup_status(struct platform_device *pdev)
 {
+	const char *reason;
 	u32 reg = readl(at91_shdwc_base + AT91_SHDW_SR);
-	char *reason = "unknown";
 
 	/* Simple power-on, just bail out */
 	if (!reg)
@@ -68,8 +68,10 @@ static void __init at91_wakeup_status(void)
 		reason = "RTT";
 	else if (reg & AT91_SHDW_RTCWK)
 		reason = "RTC";
+	else
+		reason = "unknown";
 
-	pr_info("AT91: Wake-Up source: %s\n", reason);
+	dev_info(&pdev->dev, "Wake-Up source: %s\n", reason);
 }
 
 static void at91_poweroff(void)
@@ -157,10 +159,8 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(at91_shdwc_base)) {
-		dev_err(&pdev->dev, "Could not map reset controller address\n");
+	if (IS_ERR(at91_shdwc_base))
 		return PTR_ERR(at91_shdwc_base);
-	}
 
 	sclk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(sclk))
@@ -172,7 +172,7 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	at91_wakeup_status();
+	at91_wakeup_status(pdev);
 
 	if (pdev->dev.of_node)
 		at91_poweroff_dt_set_wakeup_mode(pdev);
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index b99769f8ab15..f44a9ffcc2ab 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -145,8 +145,8 @@ static int samx7_restart(struct notifier_block *this, unsigned long mode,
 
 static void __init at91_reset_status(struct platform_device *pdev)
 {
+	const char *reason;
 	u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
-	char *reason;
 
 	switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
 	case RESET_TYPE_GENERAL:
@@ -169,7 +169,7 @@ static void __init at91_reset_status(struct platform_device *pdev)
 		break;
 	}
 
-	pr_info("AT91: Starting after %s\n", reason);
+	dev_info(&pdev->dev, "Starting after %s\n", reason);
 }
 
 static const struct of_device_id at91_ramc_of_match[] = {
diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c
index ff75af5abbc5..2ac291af1265 100644
--- a/drivers/power/reset/gemini-poweroff.c
+++ b/drivers/power/reset/gemini-poweroff.c
@@ -47,8 +47,12 @@ static irqreturn_t gemini_powerbutton_interrupt(int irq, void *data)
 	val &= 0x70U;
 	switch (val) {
 	case GEMINI_STAT_CIR:
-		dev_info(gpw->dev, "infrared poweroff\n");
-		orderly_poweroff(true);
+		/*
+		 * We do not yet have a driver for the infrared
+		 * controller so it can cause spurious poweroff
+		 * events. Ignore those for now.
+		 */
+		dev_info(gpw->dev, "infrared poweroff - ignored\n");
 		break;
 	case GEMINI_STAT_RTC:
 		dev_info(gpw->dev, "RTC poweroff\n");
@@ -116,7 +120,17 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	/* Clear the power management IRQ */
+	/*
+	 * Enable the power controller. This is crucial on Gemini
+	 * systems: if this is not done, pressing the power button
+	 * will result in unconditional poweroff without any warning.
+	 * This makes the kernel handle the poweroff.
+	 */
+	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+	val |= GEMINI_CTRL_ENABLE;
+	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+	/* Now that the state machine is active, clear the IRQ */
 	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
 	val |= GEMINI_CTRL_IRQ_CLR;
 	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
@@ -129,16 +143,6 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
 	pm_power_off = gemini_poweroff;
 	gpw_poweroff = gpw;
 
-	/*
-	 * Enable the power controller. This is crucial on Gemini
-	 * systems: if this is not done, pressing the power button
-	 * will result in unconditional poweroff without any warning.
-	 * This makes the kernel handle the poweroff.
-	 */
-	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
-	val |= GEMINI_CTRL_ENABLE;
-	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
-
 	dev_info(dev, "Gemini poweroff driver registered\n");
 
 	return 0;
diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
index be3d81ff51cc..6273ad3b411d 100644
--- a/drivers/power/reset/gpio-poweroff.c
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -19,11 +19,13 @@
 #include <linux/of_platform.h>
 #include <linux/module.h>
 
+#define DEFAULT_TIMEOUT_MS 3000
 /*
  * Hold configuration here, cannot be more than one instance of the driver
  * since pm_power_off itself is global.
  */
 static struct gpio_desc *reset_gpio;
+static u32 timeout = DEFAULT_TIMEOUT_MS;
 
 static void gpio_poweroff_do_poweroff(void)
 {
@@ -40,7 +42,7 @@ static void gpio_poweroff_do_poweroff(void)
 	gpiod_set_value(reset_gpio, 1);
 
 	/* give it some time */
-	mdelay(3000);
+	mdelay(timeout);
 
 	WARN_ON(1);
 }
@@ -58,12 +60,14 @@ static int gpio_poweroff_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	input = of_property_read_bool(pdev->dev.of_node, "input");
+	input = device_property_read_bool(&pdev->dev, "input");
 	if (input)
 		flags = GPIOD_IN;
 	else
 		flags = GPIOD_OUT_LOW;
 
+	device_property_read_u32(&pdev->dev, "timeout-ms", &timeout);
+
 	reset_gpio = devm_gpiod_get(&pdev->dev, NULL, flags);
 	if (IS_ERR(reset_gpio))
 		return PTR_ERR(reset_gpio);
diff --git a/drivers/power/reset/ocelot-reset.c b/drivers/power/reset/ocelot-reset.c
new file mode 100644
index 000000000000..5a13a5cc8188
--- /dev/null
+++ b/drivers/power/reset/ocelot-reset.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi MIPS SoC reset driver
+ *
+ * License: Dual MIT/GPL
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+struct ocelot_reset_context {
+	void __iomem *base;
+	struct regmap *cpu_ctrl;
+	struct notifier_block restart_handler;
+};
+
+#define ICPU_CFG_CPU_SYSTEM_CTRL_RESET 0x20
+#define CORE_RST_PROTECT BIT(2)
+
+#define SOFT_CHIP_RST BIT(0)
+
+static int ocelot_restart_handle(struct notifier_block *this,
+				 unsigned long mode, void *cmd)
+{
+	struct ocelot_reset_context *ctx = container_of(this, struct
+							ocelot_reset_context,
+							restart_handler);
+
+	/* Make sure the core is not protected from reset */
+	regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_RESET,
+			   CORE_RST_PROTECT, 0);
+
+	writel(SOFT_CHIP_RST, ctx->base);
+
+	pr_emerg("Unable to restart system\n");
+	return NOTIFY_DONE;
+}
+
+static int ocelot_reset_probe(struct platform_device *pdev)
+{
+	struct ocelot_reset_context *ctx;
+	struct resource *res;
+
+	struct device *dev = &pdev->dev;
+	int err;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ctx->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ctx->base))
+		return PTR_ERR(ctx->base);
+
+	ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
+	if (IS_ERR(ctx->cpu_ctrl))
+		return PTR_ERR(ctx->cpu_ctrl);
+
+	ctx->restart_handler.notifier_call = ocelot_restart_handle;
+	ctx->restart_handler.priority = 192;
+	err = register_restart_handler(&ctx->restart_handler);
+	if (err)
+		dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+	return err;
+}
+
+static const struct of_device_id ocelot_reset_of_match[] = {
+	{ .compatible = "mscc,ocelot-chip-reset" },
+	{}
+};
+
+static struct platform_driver ocelot_reset_driver = {
+	.probe = ocelot_reset_probe,
+	.driver = {
+		.name = "ocelot-chip-reset",
+		.of_match_table = ocelot_reset_of_match,
+	},
+};
+builtin_platform_driver(ocelot_reset_driver);
diff --git a/drivers/power/reset/sc27xx-poweroff.c b/drivers/power/reset/sc27xx-poweroff.c
new file mode 100644
index 000000000000..29fb08b8faa0
--- /dev/null
+++ b/drivers/power/reset/sc27xx-poweroff.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/cpu.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/syscore_ops.h>
+
+#define SC27XX_PWR_PD_HW	0xc2c
+#define SC27XX_PWR_OFF_EN	BIT(0)
+
+static struct regmap *regmap;
+
+/*
+ * On Spreadtrum platform, we need power off system through external SC27xx
+ * series PMICs, and it is one similar SPI bus mapped by regmap to access PMIC,
+ * which is not fast io access.
+ *
+ * So before stopping other cores, we need release other cores' resource by
+ * taking cpus down to avoid racing regmap or spi mutex lock when poweroff
+ * system through PMIC.
+ */
+static void sc27xx_poweroff_shutdown(void)
+{
+#ifdef CONFIG_PM_SLEEP_SMP
+	int cpu = smp_processor_id();
+
+	freeze_secondary_cpus(cpu);
+#endif
+}
+
+static struct syscore_ops poweroff_syscore_ops = {
+	.shutdown = sc27xx_poweroff_shutdown,
+};
+
+static void sc27xx_poweroff_do_poweroff(void)
+{
+	regmap_write(regmap, SC27XX_PWR_PD_HW, SC27XX_PWR_OFF_EN);
+}
+
+static int sc27xx_poweroff_probe(struct platform_device *pdev)
+{
+	if (regmap)
+		return -EINVAL;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	pm_power_off = sc27xx_poweroff_do_poweroff;
+	register_syscore_ops(&poweroff_syscore_ops);
+	return 0;
+}
+
+static struct platform_driver sc27xx_poweroff_driver = {
+	.probe = sc27xx_poweroff_probe,
+	.driver = {
+		.name = "sc27xx-poweroff",
+	},
+};
+builtin_platform_driver(sc27xx_poweroff_driver);
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
index 7494f0f0eadb..e84b6e4da14a 100644
--- a/drivers/power/supply/axp20x_battery.c
+++ b/drivers/power/supply/axp20x_battery.c
@@ -49,10 +49,22 @@
 #define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
 #define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
 
+#define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
+
 #define AXP20X_CHRG_CTRL1_TGT_CURR	GENMASK(3, 0)
 
 #define AXP20X_V_OFF_MASK		GENMASK(2, 0)
 
+struct axp20x_batt_ps;
+
+struct axp_data {
+	int	ccc_scale;
+	int	ccc_offset;
+	bool	has_fg_valid;
+	int	(*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
+	int	(*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
+};
+
 struct axp20x_batt_ps {
 	struct regmap *regmap;
 	struct power_supply *batt;
@@ -62,7 +74,7 @@ struct axp20x_batt_ps {
 	struct iio_channel *batt_v;
 	/* Maximum constant charge current */
 	unsigned int max_ccc;
-	u8 axp_id;
+	const struct axp_data	*data;
 };
 
 static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
@@ -123,20 +135,33 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
 	return 0;
 }
 
-static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val)
+static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int *val)
 {
-	if (axp->axp_id == AXP209_ID)
-		*val = *val * 100000 + 300000;
-	else
-		*val = *val * 150000 + 300000;
-}
+	int ret, reg;
 
-static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val)
-{
-	if (axp->axp_id == AXP209_ID)
-		*val = (*val - 300000) / 100000;
-	else
-		*val = (*val - 300000) / 150000;
+	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+	if (ret)
+		return ret;
+
+	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+	case AXP20X_CHRG_CTRL1_TGT_4_1V:
+		*val = 4100000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_15V:
+		*val = 4150000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_2V:
+		*val = 4200000;
+		break;
+	case AXP813_CHRG_CTRL1_TGT_4_35V:
+		*val = 4350000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
 static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
@@ -150,7 +175,7 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
 
 	*val &= AXP20X_CHRG_CTRL1_TGT_CURR;
 
-	raw_to_constant_charge_current(axp, val);
+	*val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
 
 	return 0;
 }
@@ -269,8 +294,7 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		if (axp20x_batt->axp_id == AXP221_ID &&
-		    !(reg & AXP22X_FG_VALID))
+		if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID))
 			return -EINVAL;
 
 		/*
@@ -281,11 +305,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
 		break;
 
 	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-		if (axp20x_batt->axp_id == AXP209_ID)
-			return axp20x_battery_get_max_voltage(axp20x_batt,
-							      &val->intval);
-		return axp22x_battery_get_max_voltage(axp20x_batt,
-						      &val->intval);
+		return axp20x_batt->data->get_max_voltage(axp20x_batt,
+							  &val->intval);
 
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, &reg);
@@ -312,6 +333,32 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
 	return 0;
 }
 
+static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int val)
+{
+	switch (val) {
+	case 4100000:
+		val = AXP20X_CHRG_CTRL1_TGT_4_1V;
+		break;
+
+	case 4200000:
+		val = AXP20X_CHRG_CTRL1_TGT_4_2V;
+		break;
+
+	default:
+		/*
+		 * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
+		 * can be set to 4.22V and 4.24V, but these voltages are too
+		 * high for Lithium based batteries (AXP PMICs are supposed to
+		 * be used with these kinds of battery).
+		 */
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+				  AXP20X_CHRG_CTRL1_TGT_VOLT, val);
+}
+
 static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
 					  int val)
 {
@@ -321,9 +368,6 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
 		break;
 
 	case 4150000:
-		if (axp20x_batt->axp_id == AXP221_ID)
-			return -EINVAL;
-
 		val = AXP20X_CHRG_CTRL1_TGT_4_15V;
 		break;
 
@@ -351,7 +395,8 @@ static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
 	if (charge_current > axp_batt->max_ccc)
 		return -EINVAL;
 
-	constant_charge_current_to_raw(axp_batt, &charge_current);
+	charge_current = (charge_current - axp_batt->data->ccc_offset) /
+		axp_batt->data->ccc_scale;
 
 	if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
 		return -EINVAL;
@@ -365,12 +410,14 @@ static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
 {
 	bool lower_max = false;
 
-	constant_charge_current_to_raw(axp, &charge_current);
+	charge_current = (charge_current - axp->data->ccc_offset) /
+		axp->data->ccc_scale;
 
 	if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
 		return -EINVAL;
 
-	raw_to_constant_charge_current(axp, &charge_current);
+	charge_current = charge_current * axp->data->ccc_scale +
+		axp->data->ccc_offset;
 
 	if (charge_current > axp->max_ccc)
 		dev_warn(axp->dev,
@@ -413,7 +460,7 @@ static int axp20x_battery_set_prop(struct power_supply *psy,
 		return axp20x_set_voltage_min_design(axp20x_batt, val->intval);
 
 	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-		return axp20x_battery_set_max_voltage(axp20x_batt, val->intval);
+		return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval);
 
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 		return axp20x_set_constant_charge_current(axp20x_batt,
@@ -460,13 +507,39 @@ static const struct power_supply_desc axp20x_batt_ps_desc = {
 	.set_property = axp20x_battery_set_prop,
 };
 
+static const struct axp_data axp209_data = {
+	.ccc_scale = 100000,
+	.ccc_offset = 300000,
+	.get_max_voltage = axp20x_battery_get_max_voltage,
+	.set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
+static const struct axp_data axp221_data = {
+	.ccc_scale = 150000,
+	.ccc_offset = 300000,
+	.has_fg_valid = true,
+	.get_max_voltage = axp22x_battery_get_max_voltage,
+	.set_max_voltage = axp22x_battery_set_max_voltage,
+};
+
+static const struct axp_data axp813_data = {
+	.ccc_scale = 200000,
+	.ccc_offset = 200000,
+	.has_fg_valid = true,
+	.get_max_voltage = axp813_battery_get_max_voltage,
+	.set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
 static const struct of_device_id axp20x_battery_ps_id[] = {
 	{
 		.compatible = "x-powers,axp209-battery-power-supply",
-		.data = (void *)AXP209_ID,
+		.data = (void *)&axp209_data,
 	}, {
 		.compatible = "x-powers,axp221-battery-power-supply",
-		.data = (void *)AXP221_ID,
+		.data = (void *)&axp221_data,
+	}, {
+		.compatible = "x-powers,axp813-battery-power-supply",
+		.data = (void *)&axp813_data,
 	}, { /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
@@ -476,6 +549,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
 	struct axp20x_batt_ps *axp20x_batt;
 	struct power_supply_config psy_cfg = {};
 	struct power_supply_battery_info info;
+	struct device *dev = &pdev->dev;
 
 	if (!of_device_is_available(pdev->dev.of_node))
 		return -ENODEV;
@@ -516,7 +590,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
 	psy_cfg.drv_data = axp20x_batt;
 	psy_cfg.of_node = pdev->dev.of_node;
 
-	axp20x_batt->axp_id = (uintptr_t)of_device_get_match_data(&pdev->dev);
+	axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
 
 	axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
 						       &axp20x_batt_ps_desc,
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index 4cc6e038dfdd..fd8f0b2210bc 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -343,7 +343,7 @@ static inline void fuel_gauge_remove_debugfs(struct axp288_fg_info *info)
 
 static void fuel_gauge_get_status(struct axp288_fg_info *info)
 {
-	int pwr_stat, fg_res;
+	int pwr_stat, fg_res, curr, ret;
 
 	pwr_stat = fuel_gauge_reg_readb(info, AXP20X_PWR_INPUT_STATUS);
 	if (pwr_stat < 0) {
@@ -353,19 +353,42 @@ static void fuel_gauge_get_status(struct axp288_fg_info *info)
 	}
 
 	/* Report full if Vbus is valid and the reported capacity is 100% */
-	if (pwr_stat & PS_STAT_VBUS_VALID) {
-		fg_res = fuel_gauge_reg_readb(info, AXP20X_FG_RES);
-		if (fg_res < 0) {
-			dev_err(&info->pdev->dev,
-				"FG RES read failed: %d\n", fg_res);
-			return;
-		}
-		if (fg_res == (FG_REP_CAP_VALID | 100)) {
-			info->status = POWER_SUPPLY_STATUS_FULL;
-			return;
-		}
+	if (!(pwr_stat & PS_STAT_VBUS_VALID))
+		goto not_full;
+
+	fg_res = fuel_gauge_reg_readb(info, AXP20X_FG_RES);
+	if (fg_res < 0) {
+		dev_err(&info->pdev->dev, "FG RES read failed: %d\n", fg_res);
+		return;
 	}
+	if (!(fg_res & FG_REP_CAP_VALID))
+		goto not_full;
 
+	fg_res &= ~FG_REP_CAP_VALID;
+	if (fg_res == 100) {
+		info->status = POWER_SUPPLY_STATUS_FULL;
+		return;
+	}
+
+	/*
+	 * Sometimes the charger turns itself off before fg-res reaches 100%.
+	 * When this happens the AXP288 reports a not-charging status and
+	 * 0 mA discharge current.
+	 */
+	if (fg_res < 90 || (pwr_stat & PS_STAT_BAT_CHRG_DIR))
+		goto not_full;
+
+	ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &curr);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "FG get current failed: %d\n", ret);
+		return;
+	}
+	if (curr == 0) {
+		info->status = POWER_SUPPLY_STATUS_FULL;
+		return;
+	}
+
+not_full:
 	if (pwr_stat & PS_STAT_BAT_CHRG_DIR)
 		info->status = POWER_SUPPLY_STATUS_CHARGING;
 	else
@@ -708,6 +731,12 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
 			DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
 		},
 	},
+	{
+		/* ECS EF20EA */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"),
+		},
+	},
 	{}
 };
 
diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
index c4770a94cc8e..cbec70f3e73e 100644
--- a/drivers/power/supply/bq2415x_charger.c
+++ b/drivers/power/supply/bq2415x_charger.c
@@ -1037,7 +1037,10 @@ static int bq2415x_power_supply_init(struct bq2415x_device *bq)
 	int ret;
 	int chip;
 	char revstr[8];
-	struct power_supply_config psy_cfg = { .drv_data = bq, };
+	struct power_supply_config psy_cfg = {
+		.drv_data = bq,
+		.of_node = bq->dev->of_node,
+	};
 
 	bq->charger_desc.name = bq->name;
 	bq->charger_desc.type = POWER_SUPPLY_TYPE_USB;
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index d99981542a46..7ce60519b1bc 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -1670,7 +1670,7 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_FULL;
 		else if (di->cache.flags & BQ27000_FLAG_CHGS)
 			status = POWER_SUPPLY_STATUS_CHARGING;
-		else if (power_supply_am_i_supplied(di->bat))
+		else if (power_supply_am_i_supplied(di->bat) > 0)
 			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			status = POWER_SUPPLY_STATUS_DISCHARGING;
diff --git a/drivers/power/supply/da9150-fg.c b/drivers/power/supply/da9150-fg.c
index 8b8ce978656a..1e2e5b0520c9 100644
--- a/drivers/power/supply/da9150-fg.c
+++ b/drivers/power/supply/da9150-fg.c
@@ -92,7 +92,7 @@ struct da9150_fg {
 static u32 da9150_fg_read_attr(struct da9150_fg *fg, u8 code, u8 size)
 
 {
-	u8 buf[size];
+	u8 buf[DA9150_QIF_LONG_SIZE];
 	u8 read_addr;
 	u32 res = 0;
 	int i;
@@ -111,7 +111,7 @@ static void da9150_fg_write_attr(struct da9150_fg *fg, u8 code, u8 size,
 				 u32 val)
 
 {
-	u8 buf[size];
+	u8 buf[DA9150_QIF_LONG_SIZE];
 	u8 write_addr;
 	int i;
 
diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index 001731e88718..bd2468ca6b63 100644
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c
@@ -28,14 +28,12 @@
 #include <linux/power/gpio-charger.h>
 
 struct gpio_charger {
-	const struct gpio_charger_platform_data *pdata;
 	unsigned int irq;
 	bool wakeup_enabled;
 
 	struct power_supply *charger;
 	struct power_supply_desc charger_desc;
 	struct gpio_desc *gpiod;
-	bool legacy_gpio_requested;
 };
 
 static irqreturn_t gpio_charger_irq(int irq, void *devid)
@@ -56,13 +54,10 @@ static int gpio_charger_get_property(struct power_supply *psy,
 		enum power_supply_property psp, union power_supply_propval *val)
 {
 	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
-	const struct gpio_charger_platform_data *pdata = gpio_charger->pdata;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
 		val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod);
-		/* This xor is only ever used with legacy pdata GPIO */
-		val->intval ^= pdata->gpio_active_low;
 		break;
 	default:
 		return -EINVAL;
@@ -71,175 +66,134 @@ static int gpio_charger_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static enum power_supply_property gpio_charger_properties[] = {
-	POWER_SUPPLY_PROP_ONLINE,
-};
-
-static
-struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
+static enum power_supply_type gpio_charger_get_type(struct device *dev)
 {
-	struct device_node *np = dev->of_node;
-	struct gpio_charger_platform_data *pdata;
 	const char *chargetype;
-	int ret;
-
-	if (!np)
-		return ERR_PTR(-ENOENT);
-
-	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return ERR_PTR(-ENOMEM);
-
-	pdata->name = np->name;
-	pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
-	ret = of_property_read_string(np, "charger-type", &chargetype);
-	if (ret >= 0) {
-		if (!strncmp("unknown", chargetype, 7))
-			pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
-		else if (!strncmp("battery", chargetype, 7))
-			pdata->type = POWER_SUPPLY_TYPE_BATTERY;
-		else if (!strncmp("ups", chargetype, 3))
-			pdata->type = POWER_SUPPLY_TYPE_UPS;
-		else if (!strncmp("mains", chargetype, 5))
-			pdata->type = POWER_SUPPLY_TYPE_MAINS;
-		else if (!strncmp("usb-sdp", chargetype, 7))
-			pdata->type = POWER_SUPPLY_TYPE_USB;
-		else if (!strncmp("usb-dcp", chargetype, 7))
-			pdata->type = POWER_SUPPLY_TYPE_USB_DCP;
-		else if (!strncmp("usb-cdp", chargetype, 7))
-			pdata->type = POWER_SUPPLY_TYPE_USB_CDP;
-		else if (!strncmp("usb-aca", chargetype, 7))
-			pdata->type = POWER_SUPPLY_TYPE_USB_ACA;
-		else
-			dev_warn(dev, "unknown charger type %s\n", chargetype);
+
+	if (!device_property_read_string(dev, "charger-type", &chargetype)) {
+		if (!strcmp("unknown", chargetype))
+			return POWER_SUPPLY_TYPE_UNKNOWN;
+		if (!strcmp("battery", chargetype))
+			return POWER_SUPPLY_TYPE_BATTERY;
+		if (!strcmp("ups", chargetype))
+			return POWER_SUPPLY_TYPE_UPS;
+		if (!strcmp("mains", chargetype))
+			return POWER_SUPPLY_TYPE_MAINS;
+		if (!strcmp("usb-sdp", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+		if (!strcmp("usb-dcp", chargetype))
+			return POWER_SUPPLY_TYPE_USB_DCP;
+		if (!strcmp("usb-cdp", chargetype))
+			return POWER_SUPPLY_TYPE_USB_CDP;
+		if (!strcmp("usb-aca", chargetype))
+			return POWER_SUPPLY_TYPE_USB_ACA;
 	}
+	dev_warn(dev, "unknown charger type %s\n", chargetype);
 
-	return pdata;
+	return POWER_SUPPLY_TYPE_UNKNOWN;
 }
 
+static enum power_supply_property gpio_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
 static int gpio_charger_probe(struct platform_device *pdev)
 {
-	const struct gpio_charger_platform_data *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	const struct gpio_charger_platform_data *pdata = dev->platform_data;
 	struct power_supply_config psy_cfg = {};
 	struct gpio_charger *gpio_charger;
 	struct power_supply_desc *charger_desc;
-	int ret;
-	int irq;
-
-	if (!pdata) {
-		pdata = gpio_charger_parse_dt(&pdev->dev);
-		if (IS_ERR(pdata)) {
-			ret = PTR_ERR(pdata);
-			if (ret != -EPROBE_DEFER)
-				dev_err(&pdev->dev, "No platform data\n");
-			return ret;
-		}
+	unsigned long flags;
+	int irq, ret;
+
+	if (!pdata && !dev->of_node) {
+		dev_err(dev, "No platform data\n");
+		return -ENOENT;
 	}
 
-	gpio_charger = devm_kzalloc(&pdev->dev, sizeof(*gpio_charger),
-					GFP_KERNEL);
-	if (!gpio_charger) {
-		dev_err(&pdev->dev, "Failed to alloc driver structure\n");
+	gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL);
+	if (!gpio_charger)
 		return -ENOMEM;
-	}
 
 	/*
 	 * This will fetch a GPIO descriptor from device tree, ACPI or
 	 * boardfile descriptor tables. It's good to try this first.
 	 */
-	gpio_charger->gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
+	gpio_charger->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
 
 	/*
 	 * If this fails and we're not using device tree, try the
 	 * legacy platform data method.
 	 */
-	if (IS_ERR(gpio_charger->gpiod) && !pdev->dev.of_node) {
+	if (IS_ERR(gpio_charger->gpiod) && !dev->of_node) {
 		/* Non-DT: use legacy GPIO numbers */
 		if (!gpio_is_valid(pdata->gpio)) {
-			dev_err(&pdev->dev, "Invalid gpio pin in pdata\n");
+			dev_err(dev, "Invalid gpio pin in pdata\n");
 			return -EINVAL;
 		}
-		ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
+		flags = GPIOF_IN;
+		if (pdata->gpio_active_low)
+			flags |= GPIOF_ACTIVE_LOW;
+		ret = devm_gpio_request_one(dev, pdata->gpio, flags,
+					    dev_name(dev));
 		if (ret) {
-			dev_err(&pdev->dev, "Failed to request gpio pin: %d\n",
-				ret);
+			dev_err(dev, "Failed to request gpio pin: %d\n", ret);
 			return ret;
 		}
-		gpio_charger->legacy_gpio_requested = true;
-		ret = gpio_direction_input(pdata->gpio);
-		if (ret) {
-			dev_err(&pdev->dev, "Failed to set gpio to input: %d\n",
-				ret);
-			goto err_gpio_free;
-		}
 		/* Then convert this to gpiod for now */
 		gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
 	} else if (IS_ERR(gpio_charger->gpiod)) {
 		/* Just try again if this happens */
 		if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
-		dev_err(&pdev->dev, "error getting GPIO descriptor\n");
+		dev_err(dev, "error getting GPIO descriptor\n");
 		return PTR_ERR(gpio_charger->gpiod);
 	}
 
 	charger_desc = &gpio_charger->charger_desc;
-
-	charger_desc->name = pdata->name ? pdata->name : "gpio-charger";
-	charger_desc->type = pdata->type;
 	charger_desc->properties = gpio_charger_properties;
 	charger_desc->num_properties = ARRAY_SIZE(gpio_charger_properties);
 	charger_desc->get_property = gpio_charger_get_property;
 
-	psy_cfg.supplied_to = pdata->supplied_to;
-	psy_cfg.num_supplicants = pdata->num_supplicants;
-	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.of_node = dev->of_node;
 	psy_cfg.drv_data = gpio_charger;
 
-	gpio_charger->pdata = pdata;
+	if (pdata) {
+		charger_desc->name = pdata->name;
+		charger_desc->type = pdata->type;
+		psy_cfg.supplied_to = pdata->supplied_to;
+		psy_cfg.num_supplicants = pdata->num_supplicants;
+	} else {
+		charger_desc->name = dev->of_node->name;
+		charger_desc->type = gpio_charger_get_type(dev);
+	}
+
+	if (!charger_desc->name)
+		charger_desc->name = pdev->name;
 
-	gpio_charger->charger = power_supply_register(&pdev->dev,
-						      charger_desc, &psy_cfg);
+	gpio_charger->charger = devm_power_supply_register(dev, charger_desc,
+							   &psy_cfg);
 	if (IS_ERR(gpio_charger->charger)) {
 		ret = PTR_ERR(gpio_charger->charger);
-		dev_err(&pdev->dev, "Failed to register power supply: %d\n",
-			ret);
-		goto err_gpio_free;
+		dev_err(dev, "Failed to register power supply: %d\n", ret);
+		return ret;
 	}
 
 	irq = gpiod_to_irq(gpio_charger->gpiod);
 	if (irq > 0) {
-		ret = request_any_context_irq(irq, gpio_charger_irq,
+		ret = devm_request_any_context_irq(dev, irq, gpio_charger_irq,
 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				dev_name(&pdev->dev), gpio_charger->charger);
+				dev_name(dev), gpio_charger->charger);
 		if (ret < 0)
-			dev_warn(&pdev->dev, "Failed to request irq: %d\n", ret);
+			dev_warn(dev, "Failed to request irq: %d\n", ret);
 		else
 			gpio_charger->irq = irq;
 	}
 
 	platform_set_drvdata(pdev, gpio_charger);
 
-	device_init_wakeup(&pdev->dev, 1);
-
-	return 0;
-
-err_gpio_free:
-	if (gpio_charger->legacy_gpio_requested)
-		gpio_free(pdata->gpio);
-	return ret;
-}
-
-static int gpio_charger_remove(struct platform_device *pdev)
-{
-	struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
-
-	if (gpio_charger->irq)
-		free_irq(gpio_charger->irq, gpio_charger->charger);
-
-	power_supply_unregister(gpio_charger->charger);
-
-	if (gpio_charger->legacy_gpio_requested)
-		gpio_free(gpio_charger->pdata->gpio);
+	device_init_wakeup(dev, 1);
 
 	return 0;
 }
@@ -280,7 +234,6 @@ MODULE_DEVICE_TABLE(of, gpio_charger_match);
 
 static struct platform_driver gpio_charger_driver = {
 	.probe = gpio_charger_probe,
-	.remove = gpio_charger_remove,
 	.driver = {
 		.name = "gpio-charger",
 		.pm = &gpio_charger_pm_ops,
diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
index 4cfa3f0cd689..4f129bb4c972 100644
--- a/drivers/power/supply/ltc2941-battery-gauge.c
+++ b/drivers/power/supply/ltc2941-battery-gauge.c
@@ -34,6 +34,10 @@ enum ltc294x_reg {
 	LTC294X_REG_CONTROL		= 0x01,
 	LTC294X_REG_ACC_CHARGE_MSB	= 0x02,
 	LTC294X_REG_ACC_CHARGE_LSB	= 0x03,
+	LTC294X_REG_CHARGE_THR_HIGH_MSB	= 0x04,
+	LTC294X_REG_CHARGE_THR_HIGH_LSB	= 0x05,
+	LTC294X_REG_CHARGE_THR_LOW_MSB	= 0x06,
+	LTC294X_REG_CHARGE_THR_LOW_LSB	= 0x07,
 	LTC294X_REG_VOLTAGE_MSB		= 0x08,
 	LTC294X_REG_VOLTAGE_LSB		= 0x09,
 	LTC2942_REG_TEMPERATURE_MSB	= 0x0C,
@@ -179,21 +183,22 @@ error_exit:
 	return ret;
 }
 
-static int ltc294x_read_charge_register(const struct ltc294x_info *info)
-{
+static int ltc294x_read_charge_register(const struct ltc294x_info *info,
+					enum ltc294x_reg reg)
+ {
 	int ret;
 	u8 datar[2];
 
-	ret = ltc294x_read_regs(info->client,
-		LTC294X_REG_ACC_CHARGE_MSB, &datar[0], 2);
+	ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
 	if (ret < 0)
 		return ret;
 	return (datar[0] << 8) + datar[1];
 }
 
-static int ltc294x_get_charge_now(const struct ltc294x_info *info, int *val)
+static int ltc294x_get_charge(const struct ltc294x_info *info,
+				enum ltc294x_reg reg, int *val)
 {
-	int value = ltc294x_read_charge_register(info);
+	int value = ltc294x_read_charge_register(info, reg);
 
 	if (value < 0)
 		return value;
@@ -245,10 +250,29 @@ error_exit:
 	return ret < 0 ? ret : 0;
 }
 
+static int ltc294x_set_charge_thr(const struct ltc294x_info *info,
+					enum ltc294x_reg reg, int val)
+{
+	u8 dataw[2];
+	s32 value;
+
+	value = convert_uAh_to_bin(info, val);
+	/* Direction depends on how sense+/- were connected */
+	if (info->Qlsb < 0)
+		value += 0xFFFF;
+	if ((value < 0) || (value > 0xFFFF)) /* input validation */
+		return -EINVAL;
+
+	/* Set new charge value */
+	dataw[0] = I16_MSB(value);
+	dataw[1] = I16_LSB(value);
+	return ltc294x_write_regs(info->client, reg, &dataw[0], 2);
+}
+
 static int ltc294x_get_charge_counter(
 	const struct ltc294x_info *info, int *val)
 {
-	int value = ltc294x_read_charge_register(info);
+	int value = ltc294x_read_charge_register(info, LTC294X_REG_ACC_CHARGE_MSB);
 
 	if (value < 0)
 		return value;
@@ -317,15 +341,15 @@ static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
 
 	if (info->id == LTC2942_ID) {
 		reg = LTC2942_REG_TEMPERATURE_MSB;
-		value = 60000;	/* Full-scale is 600 Kelvin */
+		value = 6000;	/* Full-scale is 600 Kelvin */
 	} else {
 		reg = LTC2943_REG_TEMPERATURE_MSB;
-		value = 51000;	/* Full-scale is 510 Kelvin */
+		value = 5100;	/* Full-scale is 510 Kelvin */
 	}
 	ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
 	value *= (datar[0] << 8) | datar[1];
-	/* Convert to centidegrees  */
-	*val = value / 0xFFFF - 27215;
+	/* Convert to tenths of degree Celsius */
+	*val = value / 0xFFFF - 2722;
 	return ret;
 }
 
@@ -336,8 +360,15 @@ static int ltc294x_get_property(struct power_supply *psy,
 	struct ltc294x_info *info = power_supply_get_drvdata(psy);
 
 	switch (prop) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		return ltc294x_get_charge(info, LTC294X_REG_CHARGE_THR_HIGH_MSB,
+						&val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+		return ltc294x_get_charge(info, LTC294X_REG_CHARGE_THR_LOW_MSB,
+						&val->intval);
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
-		return ltc294x_get_charge_now(info, &val->intval);
+		return ltc294x_get_charge(info, LTC294X_REG_ACC_CHARGE_MSB,
+						&val->intval);
 	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
 		return ltc294x_get_charge_counter(info, &val->intval);
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
@@ -358,6 +389,12 @@ static int ltc294x_set_property(struct power_supply *psy,
 	struct ltc294x_info *info = power_supply_get_drvdata(psy);
 
 	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		return ltc294x_set_charge_thr(info,
+			LTC294X_REG_CHARGE_THR_HIGH_MSB, val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+		return ltc294x_set_charge_thr(info,
+			LTC294X_REG_CHARGE_THR_LOW_MSB, val->intval);
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
 		return ltc294x_set_charge_now(info, val->intval);
 	default:
@@ -369,6 +406,8 @@ static int ltc294x_property_is_writeable(
 	struct power_supply *psy, enum power_supply_property psp)
 {
 	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
 		return 1;
 	default:
@@ -378,7 +417,7 @@ static int ltc294x_property_is_writeable(
 
 static void ltc294x_update(struct ltc294x_info *info)
 {
-	int charge = ltc294x_read_charge_register(info);
+	int charge = ltc294x_read_charge_register(info, LTC294X_REG_ACC_CHARGE_MSB);
 
 	if (charge != info->charge) {
 		info->charge = charge;
@@ -397,6 +436,8 @@ static void ltc294x_work(struct work_struct *work)
 
 static enum power_supply_property ltc294x_properties[] = {
 	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_TEMP,
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index 35dde81b1c9b..1a568df383db 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -1053,6 +1053,7 @@ static int max17042_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, chip);
 	psy_cfg.drv_data = chip;
+	psy_cfg.of_node = dev->of_node;
 
 	/* When current is not measured,
 	 * CURRENT_NOW and CURRENT_AVG properties should be invisible. */