diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-10-07 16:36:24 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-10-07 16:36:24 -0700 |
| commit | 6181073dd6a7e5deafc60e7981bd765b6c93da8c (patch) | |
| tree | 15781e235b3d3f11635ed27ec77d4cf0fef09e25 | |
| parent | 881eccbef52563feb4fde0d19d375884798783f7 (diff) | |
| parent | 30963b2f75bfdbbcf1cc5d80bf88fec7aaba808d (diff) | |
Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to finally get
this work done
- tty serial transmit cleanups in various drivers in preparation for
more cleanup and unification in future releases (that work was not
ready for this release)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full details in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
serial: cpm_uart: Don't request IRQ too early for console port
tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
tty: serial: unify TX space reads under altera_jtaguart_tx_space()
tty: serial: use FIELD_GET() in lqasc_tx_ready()
tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
tty: serial: allow pxa.c to be COMPILE_TESTed
serial: stm32: Fix unused-variable warning
tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
serial: 8250: Fix restoring termios speed after suspend
serial: Deassert Transmit Enable on probe in driver-specific way
serial: 8250_dma: Convert to use uart_xmit_advance()
serial: 8250_omap: Convert to use uart_xmit_advance()
MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
serial: stm32: Deassert Transmit Enable on ->rs485_config()
serial: ar933x: Deassert Transmit Enable on ->rs485_config()
tty: serial: atmel: Use FIELD_PREP/FIELD_GET
tty: serial: atmel: Make the driver aware of the existence of GCLK
tty: serial: atmel: Only divide Clock Divisor if the IP is USART
tty: serial: atmel: Separate mode clearing between UART and USART
dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
...
188 files changed, 1432 insertions, 1764 deletions
diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt deleted file mode 100644 index a09133066aff..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ /dev/null @@ -1,98 +0,0 @@ -* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) - -Required properties for USART: -- compatible: Should be one of the following: - - "atmel,at91rm9200-usart" - - "atmel,at91sam9260-usart" - - "microchip,sam9x60-usart" - - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" - - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" - - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt -- clock-names: tuple listing input clock names. - Required elements: "usart" -- clocks: phandles to input clocks. - -Required properties for USART in SPI mode: -- #size-cells : Must be <0> -- #address-cells : Must be <1> -- cs-gpios: chipselects (internal cs not supported) -- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h) - -Optional properties in serial and SPI mode: -- dma bindings for dma transfer: - - dmas: DMA specifier, consisting of a phandle to DMA controller node, - memory peripheral interface and USART DMA channel ID, FIFO configuration. - The order of DMA channels is fixed. The first DMA channel must be TX - associated channel and the second one must be RX associated channel. - Refer to dma.txt and atmel-dma.txt for details. - - dma-names: "tx" for TX channel. - "rx" for RX channel. - The order of dma-names is also fixed. The first name must be "tx" - and the second one must be "rx" as in the examples below. - -Optional properties in serial mode: -- atmel,use-dma-rx: use of PDC or DMA for receiving data -- atmel,use-dma-tx: use of PDC or DMA for transmitting data -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively. - It will use specified PIO instead of the peripheral function pin for the USART feature. - If unsure, don't specify this property. -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable USARTs. -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt - -<chip> compatible description: -- at91rm9200: legacy USART support -- at91sam9260: generic USART implementation for SAM9 SoCs - -Example: -- use PDC: - usart0: serial@fff8c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfff8c000 0x4000>; - interrupts = <7>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>; - cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>; - dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>; - dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>; - rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>; - }; - -- use DMA: - usart0: serial@f001c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - dmas = <&dma0 2 0x3>, - <&dma0 2 0x204>; - dma-names = "tx", "rx"; - atmel,fifo-size = <32>; - }; - -- SPI mode: - #include <dt-bindings/mfd/at91-usart.h> - - spi0: spi@f001c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart"; - atmel,usart-mode = <AT91_USART_MODE_SPI>; - reg = <0xf001c000 0x100>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, - <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; - dma-names = "tx", "rx"; - cs-gpios = <&pioB 3 0>; - }; diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml new file mode 100644 index 000000000000..30b2131b5860 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) + +maintainers: + - Richard Genoud <richard.genoud@gmail.com> + +properties: + compatible: + oneOf: + - enum: + - atmel,at91rm9200-usart + - atmel,at91sam9260-usart + - microchip,sam9x60-usart + - items: + - const: atmel,at91rm9200-dbgu + - const: atmel,at91rm9200-usart + - items: + - const: atmel,at91sam9260-dbgu + - const: atmel,at91sam9260-usart + - items: + - const: microchip,sam9x60-dbgu + - const: microchip,sam9x60-usart + - const: atmel,at91sam9260-dbgu + - const: atmel,at91sam9260-usart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + minItems: 1 + items: + - const: usart + - const: gclk + + clocks: + minItems: 1 + items: + - description: USART Peripheral Clock + - description: USART Generic Clock + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + atmel,usart-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must be either <AT91_USART_MODE_SPI> for SPI or + <AT91_USART_MODE_SERIAL> for USART (found in dt-bindings/mfd/at91-usart.h). + enum: [ 0, 1 ] + + atmel,use-dma-rx: + type: boolean + description: use of PDC or DMA for receiving data + + atmel,use-dma-tx: + type: boolean + description: use of PDC or DMA for transmitting data + + atmel,fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum number of data the RX and TX FIFOs can store for FIFO + capable USARTS. + enum: [ 16, 32 ] + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + - atmel,usart-mode + +allOf: + - if: + properties: + atmel,usart-mode: + const: 1 + then: + allOf: + - $ref: /schemas/spi/spi-controller.yaml# + + properties: + atmel,use-dma-rx: false + + atmel,use-dma-tx: false + + atmel,fifo-size: false + + "#size-cells": + const: 0 + + "#address-cells": + const: 1 + + required: + - "#size-cells" + - "#address-cells" + + else: + allOf: + - $ref: /schemas/serial/serial.yaml# + - $ref: /schemas/serial/rs485.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mfd/at91-usart.h> + #include <dt-bindings/dma/at91.h> + + /* use PDC */ + usart0: serial@fff8c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff8c000 0x4000>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + interrupts = <7>; + clocks = <&usart0_clk>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>; + cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>; + dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>; + dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>; + dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>; + rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mfd/at91-usart.h> + #include <dt-bindings/dma/at91.h> + + /* use DMA */ + usart1: serial@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&usart0_clk>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mfd/at91-usart.h> + #include <dt-bindings/dma/at91.h> + + /* SPI mode */ + spi0: spi@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + atmel,usart-mode = <AT91_USART_MODE_SPI>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&usart0_clk>; + clock-names = "usart"; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml index 4ff27d6d4d5b..fe098d98af6e 100644 --- a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml +++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml @@ -42,6 +42,7 @@ properties: - mediatek,mt8173-uart - mediatek,mt8183-uart - mediatek,mt8186-uart + - mediatek,mt8188-uart - mediatek,mt8192-uart - mediatek,mt8195-uart - mediatek,mt8516-uart diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index d8aed84abcd3..80af72859876 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -94,6 +94,12 @@ properties: resets: maxItems: 1 + reg-io-width: + description: + The size (in bytes) of the IO accesses that should be performed + on the device. + enum: [1, 4] + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 90fe45265fbc..f930e7f1349f 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -76,7 +76,7 @@ properties: - items: - enum: - - renesas,scif-r9a07g043 # RZ/G2UL + - renesas,scif-r9a07g043 # RZ/G2UL and RZ/Five - renesas,scif-r9a07g054 # RZ/V2L - const: renesas,scif-r9a07g044 # RZ/G2{L,LC} fallback diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 41d3b082eb72..8bd88d5cbb11 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -40,7 +40,6 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 1, 4 ] clocks: @@ -72,6 +71,9 @@ properties: minItems: 1 maxItems: 2 + power-domains: + maxItems: 1 + samsung,uart-fifosize: description: The fifo size supported by the UART channel. $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index dc74643ae72e..b9c2287c5d1e 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -26,6 +26,7 @@ properties: - rockchip,rk1808-uart - rockchip,rk3036-uart - rockchip,rk3066-uart + - rockchip,rk3128-uart - rockchip,rk3188-uart - rockchip,rk3288-uart - rockchip,rk3308-uart diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst index f5ba36e96461..2326c3be94fc 100644 --- a/Documentation/process/magic-number.rst +++ b/Documentation/process/magic-number.rst @@ -71,7 +71,6 @@ Magic Name Number Structure File PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/pg.h`` CMAGIC 0x0111 user ``include/linux/a.out.h`` MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` -HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` @@ -84,9 +83,6 @@ SLIP_MAGIC 0x5302 slip ``drivers/net/sl STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c`` SIXPACK_MAGIC 0x5304 sixpack ``drivers/net/hamradio/6pack.h`` AX25_MAGIC 0x5316 ax_disp ``drivers/net/mkiss.h`` -TTY_MAGIC 0x5401 tty_struct ``include/linux/tty.h`` -MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` -TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst index f452fafb1e84..1803497816f1 100644 --- a/Documentation/translations/it_IT/process/magic-number.rst +++ b/Documentation/translations/it_IT/process/magic-number.rst @@ -77,7 +77,6 @@ Nome magico Numero Struttura File PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/pg.h`` CMAGIC 0x0111 user ``include/linux/a.out.h`` MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` -HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` @@ -90,9 +89,6 @@ SLIP_MAGIC 0x5302 slip ``drivers/net/sl STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c`` SIXPACK_MAGIC 0x5304 sixpack ``drivers/net/hamradio/6pack.h`` AX25_MAGIC 0x5316 ax_disp ``drivers/net/mkiss.h`` -TTY_MAGIC 0x5401 tty_struct ``include/linux/tty.h`` -MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` -TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst index 42f0635ca70a..9780bf710eeb 100644 --- a/Documentation/translations/zh_CN/process/magic-number.rst +++ b/Documentation/translations/zh_CN/process/magic-number.rst @@ -60,7 +60,6 @@ Linux é”术数 PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/pg.h`` CMAGIC 0x0111 user ``include/linux/a.out.h`` MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` -HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` @@ -73,9 +72,6 @@ SLIP_MAGIC 0x5302 slip ``drivers/net/sl STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c`` SIXPACK_MAGIC 0x5304 sixpack ``drivers/net/hamradio/6pack.h`` AX25_MAGIC 0x5316 ax_disp ``drivers/net/mkiss.h`` -TTY_MAGIC 0x5401 tty_struct ``include/linux/tty.h`` -MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` -TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` diff --git a/Documentation/translations/zh_TW/process/magic-number.rst b/Documentation/translations/zh_TW/process/magic-number.rst index ae321a9aaece..933545e92137 100644 --- a/Documentation/translations/zh_TW/process/magic-number.rst +++ b/Documentation/translations/zh_TW/process/magic-number.rst @@ -63,7 +63,6 @@ Linux é”術數 PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/pg.h`` CMAGIC 0x0111 user ``include/linux/a.out.h`` MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` -HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` @@ -76,9 +75,6 @@ SLIP_MAGIC 0x5302 slip ``drivers/net/sl STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c`` SIXPACK_MAGIC 0x5304 sixpack ``drivers/net/hamradio/6pack.h`` AX25_MAGIC 0x5316 ax_disp ``drivers/net/mkiss.h`` -TTY_MAGIC 0x5401 tty_struct ``include/linux/tty.h`` -MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` -TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` diff --git a/MAINTAINERS b/MAINTAINERS index 957658407848..5beeea4fff5d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13339,7 +13339,7 @@ F: include/dt-bindings/dma/at91.h MICROCHIP AT91 SERIAL DRIVER M: Richard Genoud <richard.genoud@gmail.com> S: Maintained -F: Documentation/devicetree/bindings/mfd/atmel-usart.txt +F: Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml F: drivers/tty/serial/atmel_serial.c F: drivers/tty/serial/atmel_serial.h @@ -13347,7 +13347,7 @@ MICROCHIP AT91 USART MFD DRIVER M: Radu Pirea <radu_nicolae.pirea@upb.ro> L: linux-kernel@vger.kernel.org S: Supported -F: Documentation/devicetree/bindings/mfd/atmel-usart.txt +F: Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml F: drivers/mfd/at91-usart.c F: include/dt-bindings/mfd/at91-usart.h @@ -13355,7 +13355,7 @@ MICROCHIP AT91 USART SPI DRIVER M: Radu Pirea <radu_nicolae.pirea@upb.ro> L: linux-spi@vger.kernel.org S: Supported -F: Documentation/devicetree/bindings/mfd/atmel-usart.txt +F: Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml F: drivers/spi/spi-at91-usart.c MICROCHIP AUDIO ASOC DRIVERS diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h deleted file mode 100644 index b7c77bb1bfd2..000000000000 --- a/arch/alpha/include/asm/termios.h +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ALPHA_TERMIOS_H -#define _ALPHA_TERMIOS_H - -#include <uapi/asm/termios.h> - -/* eof=^D eol=\0 eol2=\0 erase=del - werase=^W kill=^U reprint=^R sxtc=\0 - intr=^C quit=^\ susp=^Z <OSF/1 VDSUSP> - start=^Q stop=^S lnext=^V discard=^U - vmin=\1 vtime=\0 -*/ -#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ - -#define user_termio_to_kernel_termios(a_termios, u_termio) \ -({ \ - struct ktermios *k_termios = (a_termios); \ - struct termio k_termio; \ - int canon, ret; \ - \ - ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio)); \ - if (!ret) { \ - /* Overwrite only the low bits. */ \ - *(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag; \ - *(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag; \ - *(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag; \ - *(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag; \ - canon = k_termio.c_lflag & ICANON; \ - \ - k_termios->c_cc[VINTR] = k_termio.c_cc[_VINTR]; \ - k_termios->c_cc[VQUIT] = k_termio.c_cc[_VQUIT]; \ - k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE]; \ - k_termios->c_cc[VKILL] = k_termio.c_cc[_VKILL]; \ - k_termios->c_cc[VEOL2] = k_termio.c_cc[_VEOL2]; \ - k_termios->c_cc[VSWTC] = k_termio.c_cc[_VSWTC]; \ - k_termios->c_cc[canon ? VEOF : VMIN] = k_termio.c_cc[_VEOF]; \ - k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL]; \ - } \ - ret; \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - * - * Note the "fun" _VMIN overloading. - */ -#define kernel_termios_to_user_termio(u_termio, a_termios) \ -({ \ - struct ktermios *k_termios = (a_termios); \ - struct termio k_termio; \ - int canon; \ - \ - k_termio.c_iflag = k_termios->c_iflag; \ - k_termio.c_oflag = k_termios->c_oflag; \ - k_termio.c_cflag = k_termios->c_cflag; \ - canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON; \ - \ - k_termio.c_line = k_termios->c_line; \ - k_termio.c_cc[_VINTR] = k_termios->c_cc[VINTR]; \ - k_termio.c_cc[_VQUIT] = k_termios->c_cc[VQUIT]; \ - k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE]; \ - k_termio.c_cc[_VKILL] = k_termios->c_cc[VKILL]; \ - k_termio.c_cc[_VEOF] = k_termios->c_cc[canon ? VEOF : VMIN]; \ - k_termio.c_cc[_VEOL] = k_termios->c_cc[canon ? VEOL : VTIME]; \ - k_termio.c_cc[_VEOL2] = k_termios->c_cc[VEOL2]; \ - k_termio.c_cc[_VSWTC] = k_termios->c_cc[VSWTC]; \ - \ - copy_to_user(u_termio, &k_termio, sizeof(k_termio)); \ -}) - -#define user_termios_to_kernel_termios(k, u) \ - copy_from_user(k, u, sizeof(struct termios2)) - -#define kernel_termios_to_user_termios(u, k) \ - copy_to_user(u, k, sizeof(struct termios2)) - -#define user_termios_to_kernel_termios_1(k, u) \ - copy_from_user(k, u, sizeof(struct termios)) - -#define kernel_termios_to_user_termios_1(u, k) \ - copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _ALPHA_TERMIOS_H */ diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index 6a274c0d53a2..bd82c8a12f0b 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -9,7 +9,7 @@ ccflags-y := -Wno-sign-compare obj-y := entry.o traps.o process.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ - systbls.o err_common.o io.o bugs.o + systbls.o err_common.o io.o bugs.o termios.o obj-$(CONFIG_VGA_HOSE) += console.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/alpha/kernel/termios.c b/arch/alpha/kernel/termios.c new file mode 100644 index 000000000000..a4c29a22edf7 --- /dev/null +++ b/arch/alpha/kernel/termios.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/termios_internal.h> + +int user_termio_to_kernel_termios(struct ktermios *termios, + struct termio __user *termio) +{ + struct termio v; + bool canon; + + if (copy_from_user(&v, termio, sizeof(struct termio))) + return -EFAULT; + + termios->c_iflag = (0xffff0000 & termios->c_iflag) | v.c_iflag; + termios->c_oflag = (0xffff0000 & termios->c_oflag) | v.c_oflag; + termios->c_cflag = (0xffff0000 & termios->c_cflag) | v.c_cflag; + termios->c_lflag = (0xffff0000 & termios->c_lflag) | v.c_lflag; + termios->c_line = (0xffff0000 & termios->c_lflag) | v.c_line; + + canon = v.c_lflag & ICANON; + termios->c_cc[VINTR] = v.c_cc[_VINTR]; + termios->c_cc[VQUIT] = v.c_cc[_VQUIT]; + termios->c_cc[VERASE] = v.c_cc[_VERASE]; + termios->c_cc[VKILL] = v.c_cc[_VKILL]; + termios->c_cc[VEOL2] = v.c_cc[_VEOL2]; + termios->c_cc[VSWTC] = v.c_cc[_VSWTC]; + termios->c_cc[canon ? VEOF : VMIN] = v.c_cc[_VEOF]; + termios->c_cc[canon ? VEOL : VTIME] = v.c_cc[_VEOL]; + + return 0; +} + +int kernel_termios_to_user_termio(struct termio __user *termio, + struct ktermios *termios) +{ + struct termio v; + bool canon; + + memset(&v, 0, sizeof(struct termio)); + v.c_iflag = termios->c_iflag; + v.c_oflag = termios->c_oflag; + v.c_cflag = termios->c_cflag; + v.c_lflag = termios->c_lflag; + v.c_line = termios->c_line; + + canon = v.c_lflag & ICANON; + v.c_cc[_VINTR] = termios->c_cc[VINTR]; + v.c_cc[_VQUIT] = termios->c_cc[VQUIT]; + v.c_cc[_VERASE] = termios->c_cc[VERASE]; + v.c_cc[_VKILL] = termios->c_cc[VKILL]; + v.c_cc[_VEOF] = termios->c_cc[canon ? VEOF : VMIN]; + v.c_cc[_VEOL] = termios->c_cc[canon ? VEOL : VTIME]; + v.c_cc[_VEOL2] = termios->c_cc[VEOL2]; + v.c_cc[_VSWTC] = termios->c_cc[VSWTC]; + + return copy_to_user(termio, &v, sizeof(struct termio)); +} diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 2d58e273c96d..95e731676cea 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/uaccess.h> #include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> diff --git a/arch/arm/mach-versatile/integrator_ap.c b/arch/arm/mach-versatile/integrator_ap.c index e216fac917d0..4bd6712e9f52 100644 --- a/arch/arm/mach-versatile/integrator_ap.c +++ b/arch/arm/mach-versatile/integrator_ap.c @@ -11,6 +11,7 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/uaccess.h> #include <linux/termios.h> #include <linux/mfd/syscon.h> #include <linux/regmap.h> diff --git a/arch/ia64/include/asm/termios.h b/arch/ia64/include/asm/termios.h deleted file mode 100644 index 589c026444cc..000000000000 --- a/arch/ia64/include/asm/termios.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Modified 1999 - * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co - * - * 99/01/28 Added N_IRDA and N_SMSBLOCK - */ -#ifndef _ASM_IA64_TERMIOS_H -#define _ASM_IA64_TERMIOS_H - -#include <uapi/asm/termios.h> - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _ASM_IA64_TERMIOS_H */ diff --git a/arch/ia64/include/uapi/asm/termios.h b/arch/ia64/include/uapi/asm/termios.h deleted file mode 100644 index 199742d08f2c..000000000000 --- a/arch/ia64/include/uapi/asm/termios.h +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Modified 1999 - * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co - * - * 99/01/28 Added N_IRDA and N_SMSBLOCK - */ -#ifndef _UAPI_ASM_IA64_TERMIOS_H -#define _UAPI_ASM_IA64_TERMIOS_H - - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_ASM_IA64_TERMIOS_H */ diff --git a/arch/loongarch/include/asm/Kbuild b/arch/loongarch/include/asm/Kbuild index 83bc0681e72b..f2bcfcb4e311 100644 --- a/arch/loongarch/include/asm/Kbuild +++ b/arch/loongarch/include/asm/Kbuild @@ -21,7 +21,6 @@ generic-y += shmbuf.h generic-y += statfs.h generic-y += socket.h generic-y += sockios.h -generic-y += termios.h generic-y += termbits.h generic-y += poll.h generic-y += param.h diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h deleted file mode 100644 index bc29eeacc55a..000000000000 --- a/arch/mips/include/asm/termios.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle - * Copyright (C) 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_TERMIOS_H -#define _ASM_TERMIOS_H - -#include <linux/uaccess.h> -#include <uapi/asm/termios.h> - -/* - * intr=^C quit=^\ erase=del kill=^U - * vmin=\1 vtime=\0 eol2=\0 swtc=\0 - * start=^Q stop=^S susp=^Z vdsusp= - * reprint=^R discard=^U werase=^W lnext=^V - * eof=^D eol=\0 - */ -#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0" - -#include <linux/string.h> - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -static inline int user_termio_to_kernel_termios(struct ktermios *termios, - struct termio __user *termio) -{ - unsigned short iflag, oflag, cflag, lflag; - unsigned int err; - - if (!access_ok(termio, sizeof(struct termio))) - return -EFAULT; - - err = __get_user(iflag, &termio->c_iflag); - termios->c_iflag = (termios->c_iflag & 0xffff0000) | iflag; - err |=__get_user(oflag, &termio->c_oflag); - termios->c_oflag = (termios->c_oflag & 0xffff0000) | oflag; - err |=__get_user(cflag, &termio->c_cflag); - termios->c_cflag = (termios->c_cflag & 0xffff0000) | cflag; - err |=__get_user(lflag, &termio->c_lflag); - termios->c_lflag = (termios->c_lflag & 0xffff0000) | lflag; - err |=__get_user(termios->c_line, &termio->c_line); - if (err) - return -EFAULT; - - if (__copy_from_user(termios->c_cc, termio->c_cc, NCC)) - return -EFAULT; - - return 0; -} - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -static inline int kernel_termios_to_user_termio(struct termio __user *termio, - struct ktermios *termios) -{ - int err; - - if (!access_ok(termio, sizeof(struct termio))) - return -EFAULT; - - err = __put_user(termios->c_iflag, &termio->c_iflag); - err |= __put_user(termios->c_oflag, &termio->c_oflag); - err |= __put_user(termios->c_cflag, &termio->c_cflag); - err |= __put_user(termios->c_lflag, &termio->c_lflag); - err |= __put_user(termios->c_line, &termio->c_line); - if (err) - return -EFAULT; - - if (__copy_to_user(termio->c_cc, termios->c_cc, NCC)) - return -EFAULT; - - return 0; -} - -static inline int user_termios_to_kernel_termios(struct ktermios __user *k, - struct termios2 *u) -{ - return copy_from_user(k, u, sizeof(struct termios2)) ? -EFAULT : 0; -} - -static inline int kernel_termios_to_user_termios(struct termios2 __user *u, - struct ktermios *k) -{ - return copy_to_user(u, k, sizeof(struct termios2)) ? -EFAULT : 0; -} - -static inline int user_termios_to_kernel_termios_1(struct ktermios *k, - struct termios __user *u) -{ - return copy_from_user(k, u, sizeof(struct termios)) ? -EFAULT : 0; -} - -static inline int kernel_termios_to_user_termios_1(struct termios __user *u, - struct ktermios *k) -{ - return copy_to_user(u, k, sizeof(struct termios)) ? -EFAULT : 0; -} - -#endif /* _ASM_TERMIOS_H */ diff --git a/arch/parisc/include/asm/termios.h b/arch/parisc/include/asm/termios.h deleted file mode 100644 index cded9dc90c1b..000000000000 --- a/arch/parisc/include/asm/termios.h +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _PARISC_TERMIOS_H -#define _PARISC_TERMIOS_H - -#include <uapi/asm/termios.h> - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _PARISC_TERMIOS_H */ diff --git a/arch/parisc/include/uapi/asm/termios.h b/arch/parisc/include/uapi/asm/termios.h deleted file mode 100644 index aba174f23ef0..000000000000 --- a/arch/parisc/include/uapi/asm/termios.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_PARISC_TERMIOS_H -#define _UAPI_PARISC_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_PARISC_TERMIOS_H */ diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h deleted file mode 100644 index 205de8f8a9d3..000000000000 --- a/arch/powerpc/include/asm/termios.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Liberally adapted from alpha/termios.h. In particular, the c_cc[] - * fields have been reordered so that termio & termios share the - * common subset in the same order (for brain dead programs that don't - * know or care about the differences). - */ -#ifndef _ASM_POWERPC_TERMIOS_H -#define _ASM_POWERPC_TERMIOS_H - -#include <uapi/asm/termios.h> - -/* ^C ^\ del ^U ^D 1 0 0 0 0 ^W ^R ^Z ^Q ^S ^V ^U */ -#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" - -#include <asm-generic/termios-base.h> - -#endif /* _ASM_POWERPC_TERMIOS_H */ diff --git a/arch/s390/include/asm/termios.h b/arch/s390/include/asm/termios.h deleted file mode 100644 index 46fa3020b41e..000000000000 --- a/arch/s390/include/asm/termios.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * S390 version - * - * Derived from "include/asm-i386/termios.h" - */ -#ifndef _S390_TERMIOS_H -#define _S390_TERMIOS_H - -#include <uapi/asm/termios.h> - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) - -#include <asm-generic/termios-base.h> - -#endif /* _S390_TERMIOS_H */ diff --git a/arch/s390/include/uapi/asm/termios.h b/arch/s390/include/uapi/asm/termios.h deleted file mode 100644 index 54223169c806..000000000000 --- a/arch/s390/include/uapi/asm/termios.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * S390 version - * - * Derived from "include/asm-i386/termios.h" - */ - -#ifndef _UAPI_S390_TERMIOS_H -#define _UAPI_S390_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_S390_TERMIOS_H */ diff --git a/arch/sparc/include/asm/termios.h b/arch/sparc/include/asm/termios.h deleted file mode 100644 index 4a558efdfa93..000000000000 --- a/arch/sparc/include/asm/termios.h +++ /dev/null @@ -1,147 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _SPARC_TERMIOS_H -#define _SPARC_TERMIOS_H - -#include <uapi/asm/termios.h> - - -/* - * c_cc characters in the termio structure. Oh, how I love being - * backwardly compatible. Notice that character 4 and 5 are - * interpreted differently depending on whether ICANON is set in - * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise - * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which - * is compatible with sysV)... - */ -#define _VMIN 4 -#define _VTIME 5 - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D eol=\0 eol2=\0 sxtc=\0 - start=^Q stop=^S susp=^Z dsusp=^Y - reprint=^R discard=^U werase=^W lnext=^V - vmin=\1 vtime=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - int err; \ - err = get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - err |= get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - err |= get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - err |= get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - err |= copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ - err; \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - * - * Note the "fun" _VMIN overloading. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - int err; \ - err = put_user((termios)->c_iflag, &(termio)->c_iflag); \ - err |= put_user((termios)->c_oflag, &(termio)->c_oflag); \ - err |= put_user((termios)->c_cflag, &(termio)->c_cflag); \ - err |= put_user((termios)->c_lflag, &(termio)->c_lflag); \ - err |= put_user((termios)->c_line, &(termio)->c_line); \ - err |= copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ - if (!((termios)->c_lflag & ICANON)) { \ - err |= put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \ - err |= put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \ - } \ - err; \ -}) - -#define user_termios_to_kernel_termios(k, u) \ -({ \ - int err; \ - err = get_user((k)->c_iflag, &(u)->c_iflag); \ - err |= get_user((k)->c_oflag, &(u)->c_oflag); \ - err |= get_user((k)->c_cflag, &(u)->c_cflag); \ - err |= get_user((k)->c_lflag, &(u)->c_lflag); \ - err |= get_user((k)->c_line, &(u)->c_line); \ - err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ - if ((k)->c_lflag & ICANON) { \ - err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } else { \ - err |= get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } \ - err |= get_user((k)->c_ispeed, &(u)->c_ispeed); \ - err |= get_user((k)->c_ospeed, &(u)->c_ospeed); \ - err; \ -}) - -#define kernel_termios_to_user_termios(u, k) \ -({ \ - int err; \ - err = put_user((k)->c_iflag, &(u)->c_iflag); \ - err |= put_user((k)->c_oflag, &(u)->c_oflag); \ - err |= put_user((k)->c_cflag, &(u)->c_cflag); \ - err |= put_user((k)->c_lflag, &(u)->c_lflag); \ - err |= put_user((k)->c_line, &(u)->c_line); \ - err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ - if (!((k)->c_lflag & ICANON)) { \ - err |= put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } else { \ - err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } \ - err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \ - err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \ - err; \ -}) - -#define user_termios_to_kernel_termios_1(k, u) \ -({ \ - int err; \ - err = get_user((k)->c_iflag, &(u)->c_iflag); \ - err |= get_user((k)->c_oflag, &(u)->c_oflag); \ - err |= get_user((k)->c_cflag, &(u)->c_cflag); \ - err |= get_user((k)->c_lflag, &(u)->c_lflag); \ - err |= get_user((k)->c_line, &(u)->c_line); \ - err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ - if ((k)->c_lflag & ICANON) { \ - err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } else { \ - err |= get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } \ - err; \ -}) - -#define kernel_termios_to_user_termios_1(u, k) \ -({ \ - int err; \ - err = put_user((k)->c_iflag, &(u)->c_iflag); \ - err |= put_user((k)->c_oflag, &(u)->c_oflag); \ - err |= put_user((k)->c_cflag, &(u)->c_cflag); \ - err |= put_user((k)->c_lflag, &(u)->c_lflag); \ - err |= put_user((k)->c_line, &(u)->c_line); \ - err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ - if (!((k)->c_lflag & ICANON)) { \ - err |= put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } else { \ - err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } \ - err; \ -}) - -#endif /* _SPARC_TERMIOS_H */ diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index d3a0e072ebe8..620c0c5b749b 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -87,12 +87,13 @@ obj-$(CONFIG_SPARC64_SMP) += hvtramp.o obj-y += auxio_$(BITS).o obj-$(CONFIG_SUN_PM) += apc.o pmc.o +obj-y += termios.o + obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_MODULES) += sparc_ksyms.o obj-$(CONFIG_SPARC_LED) += led.o obj-$(CONFIG_KGDB) += kgdb_$(BITS).o - obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o @@ -104,6 +105,7 @@ obj-$(CONFIG_SPARC64_PCI) += pci_psycho.o pci_sabre.o pci_schizo.o obj-$(CONFIG_SPARC64_PCI) += pci_sun4v.o pci_sun4v_asm.o pci_fire.o obj-$(CONFIG_SPARC64_PCI_MSI) += pci_msi.o + obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o obj-$(CONFIG_US3_MC) += chmc.o diff --git a/arch/sparc/kernel/termios.c b/arch/sparc/kernel/termios.c new file mode 100644 index 000000000000..ee64965c27cd --- /dev/null +++ b/arch/sparc/kernel/termios.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/termios_internal.h> + +/* + * c_cc characters in the termio structure. Oh, how I love being + * backwardly compatible. Notice that character 4 and 5 are + * interpreted differently depending on whether ICANON is set in + * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise + * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which + * is compatible with sysV)... + */ +#define _VMIN 4 +#define _VTIME 5 + +int kernel_termios_to_user_termio(struct termio __user *termio, + struct ktermios *termios) +{ + struct termio v; + memset(&v, 0, sizeof(struct termio)); + v.c_iflag = termios->c_iflag; + v.c_oflag = termios->c_oflag; + v.c_cflag = termios->c_cflag; + v.c_lflag = termios->c_lflag; + v.c_line = termios->c_line; + memcpy(v.c_cc, termios->c_cc, NCC); + if (!(v.c_lflag & ICANON)) { + v.c_cc[_VMIN] = termios->c_cc[VMIN]; + v.c_cc[_VTIME] = termios->c_cc[VTIME]; + } + return copy_to_user(termio, &v, sizeof(struct termio)); +} + +int user_termios_to_kernel_termios(struct ktermios *k, + struct termios2 __user *u) +{ + int err; + err = get_user(k->c_iflag, &u->c_iflag); + err |= get_user(k->c_oflag, &u->c_oflag); + err |= get_user(k->c_cflag, &u->c_cflag); + err |= get_user(k->c_lflag, &u->c_lflag); + err |= get_user(k->c_line, &u->c_line); + err |= copy_from_user(k->c_cc, u->c_cc, NCCS); + if (k->c_lflag & ICANON) { + err |= get_user(k->c_cc[VEOF], &u->c_cc[VEOF]); + err |= get_user(k->c_cc[VEOL], &u->c_cc[VEOL]); + } else { + err |= get_user(k->c_cc[VMIN], &u->c_cc[_VMIN]); + err |= get_user(k->c_cc[VTIME], &u->c_cc[_VTIME]); + } + err |= get_user(k->c_ispeed, &u->c_ispeed); + err |= get_user(k->c_ospeed, &u->c_ospeed); + return err; +} + +int kernel_termios_to_user_termios(struct termios2 __user *u, + struct ktermios *k) +{ + int err; + err = put_user(k->c_iflag, &u->c_iflag); + err |= put_user(k->c_oflag, &u->c_oflag); + err |= put_user(k->c_cflag, &u->c_cflag); + err |= put_user(k->c_lflag, &u->c_lflag); + err |= put_user(k->c_line, &u->c_line); + err |= copy_to_user(u->c_cc, k->c_cc, NCCS); + if (!(k->c_lflag & ICANON)) { + err |= put_user(k->c_cc[VMIN], &u->c_cc[_VMIN]); + err |= put_user(k->c_cc[VTIME], &u->c_cc[_VTIME]); + } else { + err |= put_user(k->c_cc[VEOF], &u->c_cc[VEOF]); + err |= put_user(k->c_cc[VEOL], &u->c_cc[VEOL]); + } + err |= put_user(k->c_ispeed, &u->c_ispeed); + err |= put_user(k->c_ospeed, &u->c_ospeed); + return err; +} + +int user_termios_to_kernel_termios_1(struct ktermios *k, + struct termios __user *u) +{ + int err; + err = get_user(k->c_iflag, &u->c_iflag); + err |= get_user(k->c_oflag, &u->c_oflag); + err |= get_user(k->c_cflag, &u->c_cflag); + err |= get_user(k->c_lflag, &u->c_lflag); + err |= get_user(k->c_line, &u->c_line); + err |= copy_from_user(k->c_cc, u->c_cc, NCCS); + if (k->c_lflag & ICANON) { + err |= get_user(k->c_cc[VEOF], &u->c_cc[VEOF]); + err |= get_user(k->c_cc[VEOL], &u->c_cc[VEOL]); + } else { + err |= get_user(k->c_cc[VMIN], &u->c_cc[_VMIN]); + err |= get_user(k->c_cc[VTIME], &u->c_cc[_VTIME]); + } + return err; +} + +int kernel_termios_to_user_termios_1(struct termios __user *u, + struct ktermios *k) +{ + int err; + err = put_user(k->c_iflag, &u->c_iflag); + err |= put_user(k->c_oflag, &u->c_oflag); + err |= put_user(k->c_cflag, &u->c_cflag); + err |= put_user(k->c_lflag, &u->c_lflag); + err |= put_user(k->c_line, &u->c_line); + err |= copy_to_user(u->c_cc, k->c_cc, NCCS); + if (!(k->c_lflag & ICANON)) { + err |= put_user(k->c_cc[VMIN], &u->c_cc[_VMIN]); + err |= put_user(k->c_cc[VTIME], &u->c_cc[_VTIME]); + } else { + err |= put_user(k->c_cc[VEOF], &u->c_cc[VEOF]); + err |= put_user(k->c_cc[VEOL], &u->c_cc[VEOL]); + } + return err; +} diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 8fc49b038372..b2735be81ab2 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2274,7 +2274,8 @@ static int mgslpc_ioctl(struct tty_struct *tty, * tty pointer to tty structure * termios pointer to buffer to hold returned old termios */ -static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +static void mgslpc_set_termios(struct tty_struct *tty, + const struct ktermios *old_termios) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; unsigned long flags; diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index 20d2b9ec1227..fc00274070b6 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -497,7 +497,7 @@ static unsigned int ipoctal_chars_in_buffer(struct tty_struct *tty) } static void ipoctal_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) + const struct ktermios *old_termios) { unsigned int cflag; unsigned char mr1 = 0; diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c index 414aa82abc39..ae7ef2e038be 100644 --- a/drivers/mmc/core/sdio_uart.c +++ b/drivers/mmc/core/sdio_uart.c @@ -246,7 +246,7 @@ static inline void sdio_uart_update_mctrl(struct sdio_uart_port *port, static void sdio_uart_change_speed(struct sdio_uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned char cval, fcr = 0; unsigned int baud, quot; @@ -859,7 +859,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty) } static void sdio_uart_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct sdio_uart_port *port = tty->driver_data; unsigned int cflag = tty->termios.c_cflag; diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index f8221a7acf62..ce1f6081d582 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1380,7 +1380,8 @@ static void hso_serial_cleanup(struct tty_struct *tty) } /* setup the term */ -static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) +static void hso_serial_set_termios(struct tty_struct *tty, + const struct ktermios *old) { struct hso_serial *serial = tty->driver_data; unsigned long flags; diff --git a/drivers/net/wwan/wwan_core.c b/drivers/net/wwan/wwan_core.c index b8c7843730ed..62e9f7d6c9fe 100644 --- a/drivers/net/wwan/wwan_core.c +++ b/drivers/net/wwan/wwan_core.c @@ -13,6 +13,7 @@ #include <linux/skbuff.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/uaccess.h> #include <linux/termios.h> #include <linux/wwan.h> #include <net/rtnetlink.h> diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index 5c83f71c1d0e..26e3995ac062 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -1760,7 +1760,7 @@ tty3270_flush_chars(struct tty_struct *tty) * Check for visible/invisible input switches */ static void -tty3270_set_termios(struct tty_struct *tty, struct ktermios *old) +tty3270_set_termios(struct tty_struct *tty, const struct ktermios *old) { struct tty3270 *tp; int new; diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index e8fa7f53cd5e..81b06d88ed0d 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -1267,7 +1267,8 @@ static int fwtty_ioctl(struct tty_struct *tty, unsigned int cmd, return err; } -static void fwtty_set_termios(struct tty_struct *tty, struct ktermios *old) +static void fwtty_set_termios(struct tty_struct *tty, + const struct ktermios *old) { struct fwtty_port *port = tty->driver_data; unsigned int baud; diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index dc4ed0ff1ae2..90ff07f2cbf7 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -480,7 +480,7 @@ static int gb_tty_break_ctl(struct tty_struct *tty, int state) } static void gb_tty_set_termios(struct tty_struct *tty, - struct ktermios *termios_old) + const struct ktermios *termios_old) { struct gb_uart_set_line_coding_request newline; struct gb_tty *gb_tty = tty->driver_data; diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 81e7f64c1739..f52266766df9 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -94,7 +94,7 @@ static struct tty_driver *serial_driver; static unsigned char current_ctl_bits; static void change_speed(struct tty_struct *tty, struct serial_state *info, - struct ktermios *old); + const struct ktermios *old); static void rs_wait_until_sent(struct tty_struct *tty, int timeout); @@ -566,7 +566,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info) * the specified baud rate for a serial port. */ static void change_speed(struct tty_struct *tty, struct serial_state *info, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct tty_port *port = &info->tport; int quot = 0, baud_base, baud; @@ -1169,7 +1169,7 @@ static int rs_ioctl(struct tty_struct *tty, return 0; } -static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +static void rs_set_termios(struct tty_struct *tty, const struct ktermios *old_termios) { struct serial_state *info = tty->driver_data; unsigned long flags; diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c index 32366caca662..7d49a872de48 100644 --- a/drivers/tty/hvc/hvc_iucv.c +++ b/drivers/tty/hvc/hvc_iucv.c @@ -29,7 +29,6 @@ /* General device driver settings */ -#define HVC_IUCV_MAGIC 0xc9e4c3e5 #define MAX_HVC_IUCV_LINES HVC_ALLOC_TTY_ADAPTERS #define MEMPOOL_MIN_NR (PAGE_SIZE / sizeof(struct iucv_tty_buffer)/4) @@ -131,9 +130,9 @@ static struct iucv_handler hvc_iucv_handler = { */ static struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num) { - if ((num < HVC_IUCV_MAGIC) || (num - HVC_IUCV_MAGIC > hvc_iucv_devices)) + if (num > hvc_iucv_devices) return NULL; - return hvc_iucv_table[num - HVC_IUCV_MAGIC]; + return hvc_iucv_table[num]; } /** @@ -1072,8 +1071,8 @@ static int __init hvc_iucv_alloc(int id, unsigned int is_console) priv->is_console = is_console; /* allocate hvc device */ - priv->hvc = hvc_alloc(HVC_IUCV_MAGIC + id, /* PAGE_SIZE */ - HVC_IUCV_MAGIC + id, &hvc_iucv_ops, 256); + priv->hvc = hvc_alloc(id, /* PAGE_SIZE */ + id, &hvc_iucv_ops, 256); if (IS_ERR(priv->hvc)) { rc = PTR_ERR(priv->hvc); goto out_error_hvc; @@ -1371,7 +1370,7 @@ static int __init hvc_iucv_init(void) /* register the first terminal device as console * (must be done before allocating hvc terminal devices) */ - rc = hvc_instantiate(HVC_IUCV_MAGIC, IUCV_HVC_CON_IDX, &hvc_iucv_ops); + rc = hvc_instantiate(0, IUCV_HVC_CON_IDX, &hvc_iucv_ops); if (rc) { pr_err("Registering HVC terminal device as " "Linux console failed\n"); diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 9b7e8246a464..4ba24963685e 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -69,6 +69,7 @@ #include <asm/hvconsole.h> #include <asm/hvcserver.h> #include <linux/uaccess.h> +#include <linux/termios_internal.h> #include <asm/vio.h> /* @@ -839,7 +840,7 @@ static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd) hvcsd->p_partition_ID = pi->partition_ID; /* copy the null-term char too */ - strlcpy(hvcsd->p_location_code, pi->location_code, + strscpy(hvcsd->p_location_code, pi->location_code, sizeof(hvcsd->p_location_code)); } diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index f3c72ab1476c..35b6fddf0341 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -491,7 +491,7 @@ static int moxa_write(struct tty_struct *, const unsigned char *, int); static unsigned int moxa_write_room(struct tty_struct *); static void moxa_flush_buffer(struct tty_struct *); static unsigned int moxa_chars_in_buffer(struct tty_struct *); -static void moxa_set_termios(struct tty_struct *, struct ktermios *); +static void moxa_set_termios(struct tty_struct *, const struct ktermios *); static void moxa_stop(struct tty_struct *); static void moxa_start(struct tty_struct *); static void moxa_hangup(struct tty_struct *); @@ -499,7 +499,7 @@ static int moxa_tiocmget(struct tty_struct *tty); static int moxa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void moxa_poll(struct timer_list *); -static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); +static void moxa_set_tty_param(struct tty_struct *, const struct ktermios *); static void moxa_shutdown(struct tty_port *); static int moxa_carrier_raised(struct tty_port *); static void moxa_dtr_rts(struct tty_port *, int); @@ -1602,7 +1602,7 @@ static int moxa_tiocmset(struct tty_struct *tty, } static void moxa_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct moxa_port *ch = tty->driver_data; @@ -1761,7 +1761,8 @@ static void moxa_poll(struct timer_list *unused) /******************************************************************************/ -static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios) +static void moxa_set_tty_param(struct tty_struct *tty, + const struct ktermios *old_termios) { register struct ktermios *ts = &tty->termios; struct moxa_port *ch = tty->driver_data; diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 70b982b2c6b2..2436e0b10f9a 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -398,7 +398,7 @@ static enum mxser_must_hwid mxser_must_get_hwid(unsigned long io) oldmcr = inb(io + UART_MCR); outb(0, io + UART_MCR); mxser_set_must_xon1_value(io, 0x11); - if ((hwid = inb(io + UART_MCR)) != 0) { + if (inb(io + UART_MCR) != 0) { outb(oldmcr, io + UART_MCR); return MOXA_OTHER_UART; } @@ -571,7 +571,8 @@ static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info, * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. */ -static void mxser_change_speed(struct tty_struct *tty, struct ktermios *old_termios) +static void mxser_change_speed(struct tty_struct *tty, + const struct ktermios *old_termios) { struct mxser_port *info = tty->driver_data; unsigned cflag, cval; @@ -1348,7 +1349,8 @@ static void mxser_start(struct tty_struct *tty) spin_unlock_irqrestore(&info->slock, flags); } -static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +static void mxser_set_termios(struct tty_struct *tty, + const struct ktermios *old_termios) { struct mxser_port *info = tty->driver_data; unsigned long flags; diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 01c112e2e214..5e516f5cac5a 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -63,6 +63,14 @@ static int debug; module_param(debug, int, 0600); +/* Module debug bits */ +#define DBG_DUMP BIT(0) /* Data transmission dump. */ +#define DBG_CD_ON BIT(1) /* Always assume CD line on. */ +#define DBG_DATA BIT(2) /* Data transmission details. */ +#define DBG_ERRORS BIT(3) /* Details for fail conditions. */ +#define DBG_TTY BIT(4) /* Transmission statistics for DLCI TTYs. */ +#define DBG_PAYLOAD BIT(5) /* Limits DBG_DUMP to payload frames. */ + /* Defaults: these are from the specification */ #define T1 10 /* 100mS */ @@ -164,6 +172,9 @@ struct gsm_dlci { struct net_device *net; /* network interface, if created */ }; +/* Total number of supported devices */ +#define GSM_TTY_MINORS 256 + /* DLCI 0, 62/63 are special or reserved see gsmtty_open */ #define NUM_DLCI 64 @@ -184,6 +195,11 @@ struct gsm_control { int error; /* Error if any */ }; +enum gsm_encoding { + GSM_BASIC_OPT, + GSM_ADV_OPT, +}; + enum gsm_mux_state { GSM_SEARCH, GSM_START, @@ -230,7 +246,7 @@ struct gsm_mux { unsigned int address; unsigned int count; bool escape; - int encoding; + enum gsm_encoding encoding; u8 control; u8 fcs; u8 *txframe; /* TX framing buffer */ @@ -527,7 +543,7 @@ static int gsm_register_devices(struct tty_driver *driver, unsigned int index) */ dev = tty_register_device(gsm_tty_driver, base + i, NULL); if (IS_ERR(dev)) { - if (debug & 8) + if (debug & DBG_ERRORS) pr_info("%s failed to register device minor %u", __func__, base + i); for (i--; i >= 1; i--) @@ -581,8 +597,12 @@ static void gsm_unregister_devices(struct tty_driver *driver, static void gsm_print_packet(const char *hdr, int addr, int cr, u8 control, const u8 *data, int dlen) { - if (!(debug & 1)) + if (!(debug & DBG_DUMP)) return; + /* Only show user payload frames if debug & DBG_PAYLOAD */ + if (!(debug & DBG_PAYLOAD) && addr != 0) + if ((control & ~PF) == UI || (control & ~PF) == UIH) + return; pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]); @@ -693,7 +713,7 @@ static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) *dp++ = (addr << 2) | (ocr << 1) | EA; *dp++ = control; - if (gsm->encoding == 0) + if (gsm->encoding == GSM_BASIC_OPT) *dp++ = EA; /* Length of data = 0 */ *dp = 0xFF - gsm_fcs_add_block(INIT_FCS, msg->data, dp - msg->data); @@ -812,7 +832,7 @@ static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg) int len, ret; - if (gsm->encoding == 0) { + if (gsm->encoding == GSM_BASIC_OPT) { gsm->txframe[0] = GSM0_SOF; memcpy(gsm->txframe + 1, msg->data, msg->len); gsm->txframe[msg->len + 1] = GSM0_SOF; @@ -824,7 +844,7 @@ static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg) len += 2; } - if (debug & 4) + if (debug & DBG_DATA) gsm_hex_dump_bytes(__func__, gsm->txframe, len); gsm_print_packet("-->", msg->addr, gsm->initiator, msg->ctrl, msg->data, msg->len); @@ -964,7 +984,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) u8 *fcs = dp + msg->len; /* Fill in the header */ - if (gsm->encoding == 0) { + if (gsm->encoding == GSM_BASIC_OPT) { if (msg->len < 128) *--dp = (msg->len << 1) | EA; else { @@ -1306,6 +1326,31 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci) /** + * gsm_control_command - send a command frame to a control + * @gsm: gsm channel + * @cmd: the command to use + * @data: data to follow encoded info + * @dlen: length of data + * + * Encode up and queue a UI/UIH frame containing our command. + */ +static int gsm_control_command(struct gsm_mux *gsm, int cmd, const u8 *data, + int dlen) +{ + struct gsm_msg *msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->ftype); + + if (msg == NULL) + return -ENOMEM; + + msg->data[0] = (cmd << 1) | CR | EA; /* Set C/R */ + msg->data[1] = (dlen << 1) | EA; + memcpy(msg->data + 2, data, dlen); + gsm_data_queue(gsm->dlci[0], msg); + + return 0; +} + +/** * gsm_control_reply - send a response frame to a control * @gsm: gsm channel * @cmd: the command to use @@ -1407,18 +1452,12 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen) unsigned int modem = 0; struct gsm_dlci *dlci; int len = clen; - int slen; + int cl = clen; const u8 *dp = data; struct tty_struct *tty; - while (gsm_read_ea(&addr, *dp++) == 0) { - len--; - if (len == 0) - return; - } - /* Must be at least one byte following the EA */ - len--; - if (len <= 0) + len = gsm_read_ea_val(&addr, data, cl); + if (len < 1) return; addr >>= 1; @@ -1427,15 +1466,20 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen) return; dlci = gsm->dlci[addr]; - slen = len; - while (gsm_read_ea(&modem, *dp++) == 0) { - len--; - if (len == 0) - return; - } - len--; + /* Must be at least one byte following the EA */ + if ((cl - len) < 1) + return; + + dp += len; + cl -= len; + + /* get the modem status */ + len = gsm_read_ea_val(&modem, dp, cl); + if (len < 1) + return; + tty = tty_port_tty_get(&dlci->port); - gsm_process_modem(tty, dlci, modem, slen - len); + gsm_process_modem(tty, dlci, modem, cl); if (tty) { tty_wakeup(tty); tty_kref_put(tty); @@ -1611,13 +1655,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command, static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl) { - struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype); - if (msg == NULL) - return; - msg->data[0] = (ctrl->cmd << 1) | CR | EA; /* command */ - msg->data[1] = (ctrl->len << 1) | EA; - memcpy(msg->data + 2, ctrl->data, ctrl->len); - gsm_data_queue(gsm->dlci[0], msg); + gsm_control_command(gsm, ctrl->cmd, ctrl->data, ctrl->len); } /** @@ -1737,7 +1775,7 @@ static int gsm_control_wait(struct gsm_mux *gsm, struct gsm_control *control) static void gsm_dlci_close(struct gsm_dlci *dlci) { del_timer(&dlci->t1); - if (debug & 8) + if (debug & DBG_ERRORS) pr_debug("DLCI %d goes closed.\n", dlci->addr); dlci->state = DLCI_CLOSED; /* Prevent us from sending data before the link is up again */ @@ -1771,7 +1809,7 @@ static void gsm_dlci_open(struct gsm_dlci *dlci) /* This will let a tty open continue */ dlci->state = DLCI_OPEN; dlci->constipated = false; - if (debug & 8) + if (debug & DBG_ERRORS) pr_debug("DLCI %d goes open.\n", dlci->addr); /* Send current modem state */ if (dlci->addr) @@ -1807,7 +1845,7 @@ static void gsm_dlci_t1(struct timer_list *t) gsm_command(dlci->gsm, dlci->addr, SABM|PF); mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); } else if (!dlci->addr && gsm->control == (DM | PF)) { - if (debug & 8) + if (debug & DBG_ERRORS) pr_info("DLCI %d opening in ADM mode.\n", dlci->addr); dlci->mode = DLCI_MODE_ADM; @@ -1910,11 +1948,10 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen) struct tty_port *port = &dlci->port; struct tty_struct *tty; unsigned int modem = 0; - int len = clen; - int slen = 0; + int len; - if (debug & 16) - pr_debug("%d bytes for tty\n", len); + if (debug & DBG_TTY) + pr_debug("%d bytes for tty\n", clen); switch (dlci->adaption) { /* Unsupported types */ case 4: /* Packetised interruptible data */ @@ -1922,24 +1959,22 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen) case 3: /* Packetised uininterruptible voice/data */ break; case 2: /* Asynchronous serial with line state in each frame */ - while (gsm_read_ea(&modem, *data++) == 0) { - len--; - slen++; - if (len == 0) - return; - } - len--; - slen++; + len = gsm_read_ea_val(&modem, data, clen); + if (len < 1) + return; tty = tty_port_tty_get(port); if (tty) { - gsm_process_modem(tty, dlci, modem, slen); + gsm_process_modem(tty, dlci, modem, len); tty_wakeup(tty); tty_kref_put(tty); } + /* Skip processed modem data */ + data += len; + clen -= len; fallthrough; case 1: /* Line state will go via DLCI 0 controls only */ default: - tty_insert_flip_string(port, data, len); + tty_insert_flip_string(port, data, clen); tty_flip_buffer_push(port); } } @@ -1960,24 +1995,27 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len) { /* See what command is involved */ unsigned int command = 0; - while (len-- > 0) { - if (gsm_read_ea(&command, *data++) == 1) { - int clen = *data++; - len--; - /* FIXME: this is properly an EA */ - clen >>= 1; - /* Malformed command ? */ - if (clen > len) - return; - if (command & 1) - gsm_control_message(dlci->gsm, command, - data, clen); - else - gsm_control_response(dlci->gsm, command, - data, clen); - return; - } - } + unsigned int clen = 0; + unsigned int dlen; + + /* read the command */ + dlen = gsm_read_ea_val(&command, data, len); + len -= dlen; + data += dlen; + + /* read any control data */ + dlen = gsm_read_ea_val(&clen, data, len); + len -= dlen; + data += dlen; + + /* Malformed command? */ + if (clen > len) + return; + + if (command & 1) + gsm_control_message(dlci->gsm, command, data, clen); + else + gsm_control_response(dlci->gsm, command, data, clen); } /** @@ -1999,7 +2037,7 @@ static void gsm_kick_timeout(struct work_struct *work) sent = gsm_dlci_data_sweep(gsm); mutex_unlock(&gsm->tx_mutex); - if (sent && debug & 4) + if (sent && debug & DBG_DATA) pr_info("%s TX queue stalled\n", __func__); } @@ -2133,7 +2171,7 @@ static void gsm_queue(struct gsm_mux *gsm) if (gsm->fcs != GOOD_FCS) { gsm->bad_fcs++; - if (debug & 4) + if (debug & DBG_DATA) pr_debug("BAD FCS %02x\n", gsm->fcs); return; } @@ -2497,7 +2535,7 @@ static int gsm_activate_mux(struct gsm_mux *gsm) if (dlci == NULL) return -ENOMEM; - if (gsm->encoding == 0) + if (gsm->encoding == GSM_BASIC_OPT) gsm->receive = gsm0_receive; else gsm->receive = gsm1_receive; @@ -2614,7 +2652,7 @@ static struct gsm_mux *gsm_alloc_mux(void) gsm->n2 = N2; gsm->ftype = UIH; gsm->adaption = 1; - gsm->encoding = 1; + gsm->encoding = GSM_ADV_OPT; gsm->mru = 64; /* Default to encoding 1 so these should be 64 */ gsm->mtu = 64; gsm->dead = true; /* Avoid early tty opens */ @@ -2716,7 +2754,7 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c) gsm->initiator = c->initiator; gsm->mru = c->mru; gsm->mtu = c->mtu; - gsm->encoding = c->encapsulation; + gsm->encoding = c->encapsulation ? GSM_ADV_OPT : GSM_BASIC_OPT; gsm->adaption = c->adaption; gsm->n2 = c->n2; @@ -2760,7 +2798,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len) set_bit(TTY_DO_WRITE_WAKEUP, &gsm->tty->flags); return -ENOSPC; } - if (debug & 4) + if (debug & DBG_DATA) gsm_hex_dump_bytes(__func__, data, len); return gsm->tty->ops->write(gsm->tty, data, len); } @@ -2846,7 +2884,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, struct gsm_mux *gsm = tty->disc_data; char flags = TTY_NORMAL; - if (debug & 4) + if (debug & DBG_DATA) gsm_hex_dump_bytes(__func__, cp, count); for (; count; count--, cp++) { @@ -2939,8 +2977,7 @@ static int gsmld_open(struct tty_struct *tty) tty->receive_room = 65536; /* Attach the initial passive connection */ - gsm->encoding = 1; - + gsm->encoding = GSM_ADV_OPT; gsmld_attach_gsm(tty, gsm); return 0; @@ -3336,7 +3373,7 @@ static int gsm_modem_upd_via_msc(struct gsm_dlci *dlci, u8 brk) struct gsm_control *ctrl; int len = 2; - if (dlci->gsm->encoding != 0) + if (dlci->gsm->encoding != GSM_BASIC_OPT) return 0; modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */ @@ -3365,7 +3402,7 @@ static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk) /* Send convergence layer type 2 empty data frame. */ gsm_modem_upd_via_data(dlci, brk); return 0; - } else if (dlci->gsm->encoding == 0) { + } else if (dlci->gsm->encoding == GSM_BASIC_OPT) { /* Send as MSC control message. */ return gsm_modem_upd_via_msc(dlci, brk); } @@ -3382,15 +3419,15 @@ static int gsm_carrier_raised(struct tty_port *port) /* Not yet open so no carrier info */ if (dlci->state != DLCI_OPEN) return 0; - if (debug & 2) + if (debug & DBG_CD_ON) return 1; /* * Basic mode with control channel in ADM mode may not respond * to CMD_MSC at all and modem_rx is empty. */ - if (gsm->encoding == 0 && gsm->dlci[0]->mode == DLCI_MODE_ADM && - !dlci->modem_rx) + if (gsm->encoding == GSM_BASIC_OPT && + gsm->dlci[0]->mode == DLCI_MODE_ADM && !dlci->modem_rx) return 1; return dlci->modem_rx & TIOCM_CD; @@ -3638,7 +3675,8 @@ static int gsmtty_ioctl(struct tty_struct *tty, } } -static void gsmtty_set_termios(struct tty_struct *tty, struct ktermios *old) +static void gsmtty_set_termios(struct tty_struct *tty, + const struct ktermios *old) { struct gsm_dlci *dlci = tty->driver_data; if (dlci->state == DLCI_CLOSED) @@ -3736,7 +3774,7 @@ static int __init gsm_init(void) return status; } - gsm_tty_driver = tty_alloc_driver(256, TTY_DRIVER_REAL_RAW | + gsm_tty_driver = tty_alloc_driver(GSM_TTY_MINORS, TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK); if (IS_ERR(gsm_tty_driver)) { pr_err("gsm_init: tty allocation failed.\n"); diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 94c1ec2dd754..46b09bfb6f3a 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -76,8 +76,6 @@ * OF THE POSSIBILITY OF SUCH DAMAGE. */ -#define HDLC_MAGIC 0x239e - #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> @@ -98,7 +96,6 @@ #include <linux/if.h> #include <linux/bitops.h> -#include <asm/termios.h> #include <linux/uaccess.h> #include "tty.h" @@ -124,7 +121,6 @@ struct n_hdlc_buf_list { /** * struct n_hdlc - per device instance data structure - * @magic: magic value for structure * @tbusy: reentrancy flag for tx wakeup code * @woke_up: tx wakeup needs to be run again as it was called while @tbusy * @tx_buf_list: list of pending transmit frame buffers @@ -133,7 +129,6 @@ struct n_hdlc_buf_list { * @rx_free_buf_list: list unused received frame buffers */ struct n_hdlc { - int magic; bool tbusy; bool woke_up; struct n_hdlc_buf_list tx_buf_list; @@ -200,10 +195,6 @@ static void n_hdlc_tty_close(struct tty_struct *tty) { struct n_hdlc *n_hdlc = tty->disc_data; - if (n_hdlc->magic != HDLC_MAGIC) { - pr_warn("n_hdlc: trying to close unopened tty!\n"); - return; - } #if defined(TTY_NO_WRITE_SPLIT) clear_bit(TTY_NO_WRITE_SPLIT, &tty->flags); #endif @@ -386,12 +377,6 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, pr_debug("%s() called count=%d\n", __func__, count); - /* verify line is using HDLC discipline */ - if (n_hdlc->magic != HDLC_MAGIC) { - pr_err("line not using HDLC discipline\n"); - return; - } - if (count > maxframe) { pr_debug("rx count>maxframesize, data discarded\n"); return; @@ -542,9 +527,6 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, pr_debug("%s() called count=%zd\n", __func__, count); - if (n_hdlc->magic != HDLC_MAGIC) - return -EIO; - /* verify frame size */ if (count > maxframe) { pr_debug("%s: truncating user packet from %zu to %d\n", @@ -609,10 +591,6 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, unsigned int cmd, pr_debug("%s() called %d\n", __func__, cmd); - /* Verify the status of the device */ - if (n_hdlc->magic != HDLC_MAGIC) - return -EBADF; - switch (cmd) { case FIONREAD: /* report count of read data available */ @@ -673,9 +651,6 @@ static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, struct n_hdlc *n_hdlc = tty->disc_data; __poll_t mask = 0; - if (n_hdlc->magic != HDLC_MAGIC) - return 0; - /* * queue the current process into any wait queue that may awaken in the * future (read and write) @@ -739,9 +714,6 @@ static struct n_hdlc *n_hdlc_alloc(void) n_hdlc_alloc_buf(&n_hdlc->rx_free_buf_list, DEFAULT_RX_BUF_COUNT, "rx"); n_hdlc_alloc_buf(&n_hdlc->tx_free_buf_list, DEFAULT_TX_BUF_COUNT, "tx"); - /* Initialize the control block */ - n_hdlc->magic = HDLC_MAGIC; - return n_hdlc; } /* end of n_hdlc_alloc() */ diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 3afdd9033a9c..597019690ae6 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1758,7 +1758,7 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, * * Locking: Caller holds @tty->termios_rwsem */ -static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) +static void n_tty_set_termios(struct tty_struct *tty, const struct ktermios *old) { struct n_tty_data *ldata = tty->disc_data; diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 752dab3356d7..07394fdaf522 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -240,7 +240,7 @@ out: } static void pty_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) + const struct ktermios *old_termios) { /* See if packet mode change of state. */ if (tty->link && tty->link->ctrl.packet) { diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index 65d6af755567..c7d34823f715 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -243,7 +243,7 @@ static void serial21285_shutdown(struct uart_port *port) static void serial21285_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, quot, h_lcr, b; diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index 8efdc271eb75..fa8ccf204d86 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -755,7 +755,7 @@ static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, static void brcmstb_set_termios(struct uart_port *up, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_8250_port *p8250 = up_to_u8250p(up); struct brcmuart_priv *priv = up->private_data; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 2e83e7367441..94fbf0add2ce 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -298,10 +298,9 @@ static void serial8250_backup_timeout(struct timer_list *t) jiffies + uart_poll_timeout(&up->port) + HZ / 5); } -static int univ8250_setup_irq(struct uart_8250_port *up) +static void univ8250_setup_timer(struct uart_8250_port *up) { struct uart_port *port = &up->port; - int retval = 0; /* * The above check will only give an accurate result the first time @@ -322,10 +321,16 @@ static int univ8250_setup_irq(struct uart_8250_port *up) */ if (!port->irq) mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); - else - retval = serial_link_irq_chain(up); +} - return retval; +static int univ8250_setup_irq(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + if (port->irq) + return serial_link_irq_chain(up); + + return 0; } static void univ8250_release_irq(struct uart_8250_port *up) @@ -381,6 +386,7 @@ static struct uart_ops univ8250_port_ops; static const struct uart_8250_ops univ8250_driver_ops = { .setup_irq = univ8250_setup_irq, .release_irq = univ8250_release_irq, + .setup_timer = univ8250_setup_timer, }; static struct uart_8250_port serial8250_ports[UART_NR]; diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index a8dba4a0a8fb..b85c82616e8c 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -26,9 +26,7 @@ static void __dma_tx_complete(void *param) dma->tx_running = 0; - xmit->tail += dma->tx_size; - xmit->tail &= UART_XMIT_SIZE - 1; - p->port.icount.tx += dma->tx_size; + uart_xmit_advance(&p->port, dma->tx_size); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&p->port); @@ -107,8 +105,7 @@ int serial8250_tx_dma(struct uart_8250_port *p) dma_async_issue_pending(dma->txchan); serial8250_clear_THRI(p); - if (dma->tx_err) - dma->tx_err = 0; + dma->tx_err = 0; return 0; err: diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index a604b42e4458..7db51781289e 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -350,7 +350,7 @@ dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) } static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long newrate = tty_termios_baud_rate(termios) * 16; struct dw8250_data *d = to_dw8250_data(p->private_data); diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index dbe4d44f60d4..75f32f054ebb 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -92,7 +92,8 @@ static void dw8250_set_divisor(struct uart_port *p, unsigned int baud, serial8250_do_set_divisor(p, baud, quot, quot_frac); } -void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old) +void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, + const struct ktermios *old) { p->status &= ~UPSTAT_AUTOCTS; if (termios->c_cflag & CRTSCTS) diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index 055bfdc87985..f13e91f2cace 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -47,7 +47,7 @@ struct dw8250_data { unsigned int uart_16550_compatible:1; }; -void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old); +void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, const struct ktermios *old); void dw8250_setup_port(struct uart_port *p); static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index 65b6b3cbaff6..e2aa2a1a02dd 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -278,7 +278,7 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata) static void fintek_8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct fintek_8250 *pdata = port->private_data; unsigned int baud = tty_termios_baud_rate(termios); diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 4ba43bef9933..44cc755b1a29 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -70,7 +70,7 @@ static inline struct lpss8250 *to_lpss8250(struct dw8250_port_data *data) } static void byt_set_termios(struct uart_port *p, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud = tty_termios_baud_rate(termios); struct lpss8250 *lpss = to_lpss8250(p->private_data); diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c index 737c4c31e8a0..f46ca13ff4aa 100644 --- a/drivers/tty/serial/8250/8250_men_mcb.c +++ b/drivers/tty/serial/8250/8250_men_mcb.c @@ -7,7 +7,6 @@ #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> -#include <uapi/linux/serial_core.h> #define MEN_UART_ID_Z025 0x19 #define MEN_UART_ID_Z057 0x39 diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c index a2a03acb04ad..2cc78a4bf7a1 100644 --- a/drivers/tty/serial/8250/8250_mid.c +++ b/drivers/tty/serial/8250/8250_mid.c @@ -206,9 +206,8 @@ static void dnv_exit(struct mid8250 *mid) /*****************************************************************************/ -static void mid8250_set_termios(struct uart_port *p, - struct ktermios *termios, - struct ktermios *old) +static void mid8250_set_termios(struct uart_port *p, struct ktermios *termios, + const struct ktermios *old) { unsigned int baud = tty_termios_baud_rate(termios); struct mid8250 *mid = p->private_data; diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 54051ec7b499..fb1d5ec0940e 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -291,7 +291,7 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode) static void mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { static const unsigned short fraction_L_mapping[] = { 0, 1, 0x5, 0x15, 0x55, 0x57, 0x57, 0x77, 0x7F, 0xFF, 0xFF diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index f7fbef83583c..41b8c6b27136 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -342,6 +342,9 @@ static void omap8250_restore_regs(struct uart_8250_port *up) omap8250_update_mdr1(up, priv); up->port.ops->set_mctrl(&up->port, up->port.mctrl); + + if (up->port.rs485.flags & SER_RS485_ENABLED) + serial8250_em485_stop_tx(up); } /* @@ -350,7 +353,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) */ static void omap_8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = up->port.private_data; @@ -984,9 +987,7 @@ static void omap_8250_dma_tx_complete(void *param) dma->tx_running = 0; - xmit->tail += dma->tx_size; - xmit->tail &= UART_XMIT_SIZE - 1; - p->port.icount.tx += dma->tx_size; + uart_xmit_advance(&p->port, dma->tx_size); if (priv->delayed_restore) { priv->delayed_restore = 0; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6f66dc2ebacc..8e9f247590bd 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1232,6 +1232,10 @@ static void pci_oxsemi_tornado_set_mctrl(struct uart_port *port, serial8250_do_set_mctrl(port, mctrl); } +/* + * We require EFR features for clock programming, so set UPF_FULL_PROBE + * for full probing regardless of CONFIG_SERIAL_8250_16550A_VARIANTS setting. + */ static int pci_oxsemi_tornado_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *up, int idx) @@ -1239,6 +1243,7 @@ static int pci_oxsemi_tornado_setup(struct serial_private *priv, struct pci_dev *dev = priv->dev; if (pci_oxsemi_tornado_p(dev)) { + up->port.flags |= UPF_FULL_PROBE; up->port.get_divisor = pci_oxsemi_tornado_get_divisor; up->port.set_divisor = pci_oxsemi_tornado_set_divisor; up->port.set_mctrl = pci_oxsemi_tornado_set_mctrl; @@ -1627,7 +1632,6 @@ static int pci_fintek_init(struct pci_dev *dev) resource_size_t bar_data[3]; u8 config_base; struct serial_private *priv = pci_get_drvdata(dev); - struct uart_8250_port *port; if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || @@ -1674,13 +1678,7 @@ static int pci_fintek_init(struct pci_dev *dev) pci_write_config_byte(dev, config_base + 0x06, dev->irq); - if (priv) { - /* re-apply RS232/485 mode when - * pciserial_resume_ports() - */ - port = serial8250_get_port(priv->line[i]); - uart_rs485_config(&port->port); - } else { + if (!priv) { /* First init without port data * force init to RS232 Mode */ diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 39b35a61958c..fe8662cd9402 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -600,7 +600,7 @@ EXPORT_SYMBOL_GPL(serial8250_rpm_put); static int serial8250_em485_init(struct uart_8250_port *p) { if (p->em485) - return 0; + goto deassert_rts; p->em485 = kmalloc(sizeof(struct uart_8250_em485), GFP_ATOMIC); if (!p->em485) @@ -616,7 +616,9 @@ static int serial8250_em485_init(struct uart_8250_port *p) p->em485->active_timer = NULL; p->em485->tx_stopped = true; - p->rs485_stop_tx(p); +deassert_rts: + if (p->em485->tx_stopped) + p->rs485_stop_tx(p); return 0; } @@ -752,6 +754,14 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) serial8250_rpm_put(p); } +static void serial8250_clear_IER(struct uart_8250_port *up) +{ + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); +} + #ifdef CONFIG_SERIAL_8250_RSA /* * Attempts to turn on the RSA FIFO. Returns zero on failure. @@ -1021,7 +1031,8 @@ static void autoconfig_16550a(struct uart_8250_port *up) up->port.type = PORT_16550A; up->capabilities |= UART_CAP_FIFO; - if (!IS_ENABLED(CONFIG_SERIAL_8250_16550A_VARIANTS)) + if (!IS_ENABLED(CONFIG_SERIAL_8250_16550A_VARIANTS) && + !(up->port.flags & UPF_FULL_PROBE)) return; /* @@ -1133,7 +1144,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) * internal UARTs. * We're going to explicitly set the UUE bit to 0 before * trying to write and read a 1 just to make sure it's not - * already a 1 and maybe locked there before we even start start. + * already a 1 and maybe locked there before we even start. */ iersave = serial_in(up, UART_IER); serial_out(up, UART_IER, iersave & ~UART_IER_UUE); @@ -1329,10 +1340,7 @@ static void autoconfig(struct uart_8250_port *up) serial8250_out_MCR(up, save_mcr); serial8250_clear_fifos(up); serial_in(up, UART_RX); - if (up->capabilities & UART_CAP_UUE) - serial_out(up, UART_IER, UART_IER_UUE); - else - serial_out(up, UART_IER, 0); + serial8250_clear_IER(up); out_unlock: spin_unlock_irqrestore(&port->lock, flags); @@ -2042,6 +2050,9 @@ EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) { + if (port->rs485.flags & SER_RS485_ENABLED) + return; + if (port->set_mctrl) port->set_mctrl(port, mctrl); else @@ -2142,10 +2153,7 @@ static void serial8250_put_poll_char(struct uart_port *port, * First save the IER then disable the interrupts */ ier = serial_port_in(port, UART_IER); - if (up->capabilities & UART_CAP_UUE) - serial_port_out(port, UART_IER, UART_IER_UUE); - else - serial_port_out(port, UART_IER, 0); + serial8250_clear_IER(up); wait_for_xmitr(up, UART_LSR_BOTH_EMPTY); /* @@ -2294,6 +2302,10 @@ int serial8250_do_startup(struct uart_port *port) if (port->irq && (up->port.flags & UPF_SHARE_IRQ)) up->port.irqflags |= IRQF_SHARED; + retval = up->ops->setup_irq(up); + if (retval) + goto out; + if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) { unsigned char iir1; @@ -2336,9 +2348,7 @@ int serial8250_do_startup(struct uart_port *port) } } - retval = up->ops->setup_irq(up); - if (retval) - goto out; + up->ops->setup_timer(up); /* * Now, initialize the UART @@ -2651,7 +2661,7 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, static unsigned int serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int tolerance = port->uartclk / 100; unsigned int min; @@ -2737,7 +2747,7 @@ EXPORT_SYMBOL_GPL(serial8250_update_uartclk); void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_8250_port *up = up_to_u8250p(port); unsigned char cval; @@ -2875,7 +2885,7 @@ EXPORT_SYMBOL(serial8250_do_set_termios); static void serial8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { if (port->set_termios) port->set_termios(port, termios, old); @@ -3187,9 +3197,6 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (flags & UART_CONFIG_TYPE) autoconfig(up); - if (port->rs485.flags & SER_RS485_ENABLED) - uart_rs485_config(port); - /* if access method is AU, it is a 16550 with a quirk */ if (port->type == PORT_16550A && port->iotype == UPIO_AU) up->bugs |= UART_BUG_NOMSR; @@ -3314,8 +3321,13 @@ static void serial8250_console_restore(struct uart_8250_port *up) unsigned int baud, quot, frac = 0; termios.c_cflag = port->cons->cflag; - if (port->state->port.tty && termios.c_cflag == 0) + termios.c_ispeed = port->cons->ispeed; + termios.c_ospeed = port->cons->ospeed; + if (port->state->port.tty && termios.c_cflag == 0) { termios.c_cflag = port->state->port.tty->termios.c_cflag; + termios.c_ispeed = port->state->port.tty->termios.c_ispeed; + termios.c_ospeed = port->state->port.tty->termios.c_ospeed; + } baud = serial8250_get_baud_rate(port, &termios, NULL); quot = serial8250_get_divisor(port, baud, &frac); @@ -3383,11 +3395,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, * First save the IER then disable the interrupts */ ier = serial_port_in(port, UART_IER); - - if (up->capabilities & UART_CAP_UUE) - serial_port_out(port, UART_IER, UART_IER_UUE); - else - serial_port_out(port, UART_IER, 0); + serial8250_clear_IER(up); /* check scratch reg to see if port powered off during system sleep */ if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) { diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index ba4b63fd511e..13cdd9def087 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -127,6 +127,7 @@ config SERIAL_SB1250_DUART_CONSOLE config SERIAL_ATMEL bool "AT91 on-chip serial port support" + depends on COMMON_CLK depends on ARCH_AT91 || COMPILE_TEST select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB @@ -427,7 +428,7 @@ config SERIAL_PXA config SERIAL_PXA_NON8250 bool - depends on !SERIAL_8250 + depends on !SERIAL_8250 || COMPILE_TEST config SERIAL_PXA_CONSOLE bool "Console on PXA serial port (DEPRECATED)" @@ -1325,7 +1326,7 @@ config SERIAL_FSL_LPUART config SERIAL_FSL_LPUART_CONSOLE bool "Console on Freescale lpuart serial port" - depends on SERIAL_FSL_LPUART=y + depends on SERIAL_FSL_LPUART select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON help diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index cb791c5149a3..c2d154d78e54 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -9,6 +9,7 @@ * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch> */ +#include <linux/bitfield.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -48,7 +49,6 @@ #define ALTERA_JTAGUART_CONTROL_WI_MSK 0x00000200 #define ALTERA_JTAGUART_CONTROL_AC_MSK 0x00000400 #define ALTERA_JTAGUART_CONTROL_WSPACE_MSK 0xFFFF0000 -#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF 16 /* * Local per-uart structure. @@ -59,10 +59,19 @@ struct altera_jtaguart { unsigned long imr; /* Local IMR mirror */ }; +static unsigned int altera_jtaguart_tx_space(struct uart_port *port, u32 *ctlp) +{ + u32 ctl = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG); + + if (ctlp) + *ctlp = ctl; + + return FIELD_GET(ALTERA_JTAGUART_CONTROL_WSPACE_MSK, ctl); +} + static unsigned int altera_jtaguart_tx_empty(struct uart_port *port) { - return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0; + return altera_jtaguart_tx_space(port, NULL) ? TIOCSER_TEMT : 0; } static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port) @@ -106,8 +115,8 @@ static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state) } static void altera_jtaguart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { /* Just copy the old termios settings back */ if (old) @@ -150,9 +159,7 @@ static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) pending = uart_circ_chars_pending(xmit); if (pending > 0) { - count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >> - ALTERA_JTAGUART_CONTROL_WSPACE_OFF; + count = altera_jtaguart_tx_space(port, NULL); if (count > pending) count = pending; if (count > 0) { @@ -298,17 +305,17 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) static void altera_jtaguart_console_putc(struct uart_port *port, unsigned char c) { - unsigned long status; unsigned long flags; + u32 status; spin_lock_irqsave(&port->lock, flags); - while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + while (!altera_jtaguart_tx_space(port, &status)) { + spin_unlock_irqrestore(&port->lock, flags); + if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) { - spin_unlock_irqrestore(&port->lock, flags); return; /* no connection activity */ } - spin_unlock_irqrestore(&port->lock, flags); + cpu_relax(); spin_lock_irqsave(&port->lock, flags); } @@ -321,8 +328,7 @@ static void altera_jtaguart_console_putc(struct uart_port *port, unsigned char c unsigned long flags; spin_lock_irqsave(&port->lock, flags); - while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + while (!altera_jtaguart_tx_space(port, NULL)) { spin_unlock_irqrestore(&port->lock, flags); cpu_relax(); spin_lock_irqsave(&port->lock, flags); diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 8b749ed557c6..82f2790de28d 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -175,7 +175,7 @@ static void altera_uart_break_ctl(struct uart_port *port, int break_state) static void altera_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, baudclk; @@ -199,9 +199,8 @@ static void altera_uart_set_termios(struct uart_port *port, */ } -static void altera_uart_rx_chars(struct altera_uart *pp) +static void altera_uart_rx_chars(struct uart_port *port) { - struct uart_port *port = &pp->port; unsigned char ch, flag; unsigned short status; @@ -246,9 +245,8 @@ static void altera_uart_rx_chars(struct altera_uart *pp) tty_flip_buffer_push(&port->state->port); } -static void altera_uart_tx_chars(struct altera_uart *pp) +static void altera_uart_tx_chars(struct uart_port *port) { - struct uart_port *port = &pp->port; struct circ_buf *xmit = &port->state->xmit; if (port->x_char) { @@ -272,10 +270,8 @@ static void altera_uart_tx_chars(struct altera_uart *pp) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (xmit->head == xmit->tail) { - pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_update_ctrl_reg(pp); - } + if (uart_circ_empty(xmit)) + altera_uart_stop_tx(port); } static irqreturn_t altera_uart_interrupt(int irq, void *data) @@ -288,9 +284,9 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data) spin_lock(&port->lock); if (isr & ALTERA_UART_STATUS_RRDY_MSK) - altera_uart_rx_chars(pp); + altera_uart_rx_chars(port); if (isr & ALTERA_UART_STATUS_TRDY_MSK) - altera_uart_tx_chars(pp); + altera_uart_tx_chars(port); spin_unlock(&port->lock); return IRQ_RETVAL(isr); diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index fae0b581ff42..af27fb8ec145 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -370,7 +370,7 @@ static void pl010_shutdown(struct uart_port *port) static void pl010_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int lcr_h, old_cr; unsigned long flags; diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 15f0e4d88c5a..5cdced39eafd 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2030,7 +2030,7 @@ pl011_setup_status_masks(struct uart_port *port, struct ktermios *termios) static void pl011_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); @@ -2162,7 +2162,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, static void sbsa_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); @@ -2777,6 +2777,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) struct uart_amba_port *uap; struct vendor_data *vendor = id->data; int portnr, ret; + u32 val; portnr = pl011_find_free_port(); if (portnr < 0) @@ -2801,6 +2802,21 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->port.rs485_supported = pl011_rs485_supported; snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); + if (device_property_read_u32(&dev->dev, "reg-io-width", &val) == 0) { + switch (val) { + case 1: + uap->port.iotype = UPIO_MEM; + break; + case 4: + uap->port.iotype = UPIO_MEM32; + break; + default: + dev_warn(&dev->dev, "unsupported reg-io-width (%d)\n", + val); + return -EINVAL; + } + } + ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr); if (ret) return ret; diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index 9ef82d870ff2..450f4edfda0f 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -228,7 +228,7 @@ static void apbuart_shutdown(struct uart_port *port) } static void apbuart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, const struct ktermios *old) { unsigned int cr; unsigned long flags; diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 32caeac12985..925484a42c82 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -283,7 +283,7 @@ static void ar933x_uart_get_scale_step(unsigned int clk, static void ar933x_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { struct ar933x_uart_port *up = container_of(port, struct ar933x_uart_port, port); @@ -583,6 +583,13 @@ static const struct uart_ops ar933x_uart_ops = { static int ar933x_config_rs485(struct uart_port *port, struct ktermios *termios, struct serial_rs485 *rs485conf) { + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + if (port->rs485.flags & SER_RS485_ENABLED) + gpiod_set_value(up->rts_gpiod, + !!(rs485conf->flags & SER_RS485_RTS_AFTER_SEND)); + return 0; } diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 2a09e92ef9ed..2a65ea2660e1 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -351,7 +351,7 @@ static void arc_serial_shutdown(struct uart_port *port) static void arc_serial_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { struct arc_uart_port *uart = to_arc_port(port); unsigned int baud, uartl, uarth, hw_val; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 7450d3853031..bd07f79a2df9 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/console.h> #include <linux/sysrq.h> #include <linux/tty_flip.h> @@ -110,6 +111,7 @@ struct atmel_uart_char { struct atmel_uart_port { struct uart_port uart; /* uart */ struct clk *clk; /* uart clock */ + struct clk *gclk; /* uart generic clock */ int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ u32 backup_imr; /* IMR saved during suspend */ int break_active; /* break being received */ @@ -150,6 +152,7 @@ struct atmel_uart_port { u32 rts_low; bool ms_irq_enabled; u32 rtor; /* address of receiver timeout register if it exists */ + bool is_usart; bool has_frac_baudrate; bool has_hw_timer; struct timer_list uart_timer; @@ -228,6 +231,11 @@ static inline int atmel_uart_is_half_duplex(struct uart_port *port) (port->iso7816.flags & SER_ISO7816_ENABLED); } +static inline int atmel_error_rate(int desired_value, int actual_value) +{ + return 100 - (desired_value * 100) / actual_value; +} + #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { @@ -1825,6 +1833,7 @@ static void atmel_get_ip_name(struct uart_port *port) */ atmel_port->has_frac_baudrate = false; atmel_port->has_hw_timer = false; + atmel_port->is_usart = false; if (name == new_uart) { dev_dbg(port->dev, "Uart with hw timer"); @@ -1834,6 +1843,7 @@ static void atmel_get_ip_name(struct uart_port *port) dev_dbg(port->dev, "Usart\n"); atmel_port->has_frac_baudrate = true; atmel_port->has_hw_timer = true; + atmel_port->is_usart = true; atmel_port->rtor = ATMEL_US_RTOR; version = atmel_uart_readl(port, ATMEL_US_VERSION); switch (version) { @@ -1863,6 +1873,7 @@ static void atmel_get_ip_name(struct uart_port *port) dev_dbg(port->dev, "This version is usart\n"); atmel_port->has_frac_baudrate = true; atmel_port->has_hw_timer = true; + atmel_port->is_usart = true; atmel_port->rtor = ATMEL_US_RTOR; break; case 0x203: @@ -2113,6 +2124,8 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, * This is called on uart_close() or a suspend event. */ clk_disable_unprepare(atmel_port->clk); + if (__clk_is_enabled(atmel_port->gclk)) + clk_disable_unprepare(atmel_port->gclk); break; default: dev_err(port->dev, "atmel_serial: unknown pm %d\n", state); @@ -2122,19 +2135,25 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, /* * Change the port parameters */ -static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +static void atmel_set_termios(struct uart_port *port, + struct ktermios *termios, + const struct ktermios *old) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); unsigned long flags; - unsigned int old_mode, mode, imr, quot, baud, div, cd, fp = 0; + unsigned int old_mode, mode, imr, quot, div, cd, fp = 0; + unsigned int baud, actual_baud, gclk_rate; + int ret; /* save the current mode register */ mode = old_mode = atmel_uart_readl(port, ATMEL_US_MR); /* reset the mode, clock divisor, parity, stop bits and data size */ - mode &= ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | - ATMEL_US_PAR | ATMEL_US_USMODE); + if (atmel_port->is_usart) + mode &= ~(ATMEL_US_NBSTOP | ATMEL_US_PAR | ATMEL_US_CHRL | + ATMEL_US_USCLKS | ATMEL_US_USMODE); + else + mode &= ~(ATMEL_UA_BRSRCCK | ATMEL_US_PAR | ATMEL_UA_FILTER); baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); @@ -2282,10 +2301,60 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, cd = uart_get_divisor(port, baud); } - if (cd > 65535) { /* BRGR is 16-bit, so switch to slower clock */ + /* + * If the current value of the Clock Divisor surpasses the 16 bit + * ATMEL_US_CD mask and the IP is USART, switch to the Peripheral + * Clock implicitly divided by 8. + * If the IP is UART however, keep the highest possible value for + * the CD and avoid needless division of CD, since UART IP's do not + * support implicit division of the Peripheral Clock. + */ + if (atmel_port->is_usart && cd > ATMEL_US_CD) { cd /= 8; mode |= ATMEL_US_USCLKS_MCK_DIV8; + } else { + cd = min_t(unsigned int, cd, ATMEL_US_CD); + } + + /* + * If there is no Fractional Part, there is a high chance that + * we may be able to generate a baudrate closer to the desired one + * if we use the GCLK as the clock source driving the baudrate + * generator. + */ + if (!atmel_port->has_frac_baudrate) { + if (__clk_is_enabled(atmel_port->gclk)) + clk_disable_unprepare(atmel_port->gclk); + gclk_rate = clk_round_rate(atmel_port->gclk, 16 * baud); + actual_baud = clk_get_rate(atmel_port->clk) / (16 * cd); + if (gclk_rate && abs(atmel_error_rate(baud, actual_baud)) > + abs(atmel_error_rate(baud, gclk_rate / 16))) { + clk_set_rate(atmel_port->gclk, 16 * baud); + ret = clk_prepare_enable(atmel_port->gclk); + if (ret) + goto gclk_fail; + + if (atmel_port->is_usart) { + mode &= ~ATMEL_US_USCLKS; + mode |= ATMEL_US_USCLKS_GCLK; + } else { + mode |= ATMEL_UA_BRSRCCK; + } + + /* + * Set the Clock Divisor for GCLK to 1. + * Since we were able to generate the smallest + * multiple of the desired baudrate times 16, + * then we surely can generate a bigger multiple + * with the exact error rate for an equally increased + * CD. Thus no need to take into account + * a higher value for CD. + */ + cd = 1; + } } + +gclk_fail: quot = cd | fp << ATMEL_US_FP_OFFSET; if (!(port->iso7816.flags & SER_ISO7816_ENABLED)) @@ -2881,6 +2950,12 @@ static int atmel_serial_probe(struct platform_device *pdev) if (ret) goto err; + atmel_port->gclk = devm_clk_get_optional(&pdev->dev, "gclk"); + if (IS_ERR(atmel_port->gclk)) { + ret = PTR_ERR(atmel_port->gclk); + goto err_clk_disable_unprepare; + } + ret = atmel_init_port(atmel_port, pdev); if (ret) goto err_clk_disable_unprepare; diff --git a/drivers/tty/serial/atmel_serial.h b/drivers/tty/serial/atmel_serial.h index 0d8a0f9cc5c3..87f8f7996307 100644 --- a/drivers/tty/serial/atmel_serial.h +++ b/drivers/tty/serial/atmel_serial.h @@ -9,6 +9,8 @@ * Based on AT91RM9200 datasheet revision E. */ +#include <linux/bitfield.h> + #ifndef ATMEL_SERIAL_H #define ATMEL_SERIAL_H @@ -39,39 +41,42 @@ #define ATMEL_US_MR 0x04 /* Mode Register */ #define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ -#define ATMEL_US_USMODE_NORMAL 0 -#define ATMEL_US_USMODE_RS485 1 -#define ATMEL_US_USMODE_HWHS 2 -#define ATMEL_US_USMODE_MODEM 3 -#define ATMEL_US_USMODE_ISO7816_T0 4 -#define ATMEL_US_USMODE_ISO7816_T1 6 -#define ATMEL_US_USMODE_IRDA 8 +#define ATMEL_US_USMODE_NORMAL FIELD_PREP(ATMEL_US_USMODE, 0) +#define ATMEL_US_USMODE_RS485 FIELD_PREP(ATMEL_US_USMODE, 1) +#define ATMEL_US_USMODE_HWHS FIELD_PREP(ATMEL_US_USMODE, 2) +#define ATMEL_US_USMODE_MODEM FIELD_PREP(ATMEL_US_USMODE, 3) +#define ATMEL_US_USMODE_ISO7816_T0 FIELD_PREP(ATMEL_US_USMODE, 4) +#define ATMEL_US_USMODE_ISO7816_T1 FIELD_PREP(ATMEL_US_USMODE, 6) +#define ATMEL_US_USMODE_IRDA FIELD_PREP(ATMEL_US_USMODE, 8) #define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ -#define ATMEL_US_USCLKS_MCK (0 << 4) -#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) -#define ATMEL_US_USCLKS_SCK (3 << 4) +#define ATMEL_US_USCLKS_MCK FIELD_PREP(ATMEL_US_USCLKS, 0) +#define ATMEL_US_USCLKS_MCK_DIV8 FIELD_PREP(ATMEL_US_USCLKS, 1) +#define ATMEL_US_USCLKS_GCLK FIELD_PREP(ATMEL_US_USCLKS, 2) +#define ATMEL_US_USCLKS_SCK FIELD_PREP(ATMEL_US_USCLKS, 3) +#define ATMEL_UA_FILTER BIT(4) #define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ -#define ATMEL_US_CHRL_5 (0 << 6) -#define ATMEL_US_CHRL_6 (1 << 6) -#define ATMEL_US_CHRL_7 (2 << 6) -#define ATMEL_US_CHRL_8 (3 << 6) +#define ATMEL_US_CHRL_5 FIELD_PREP(ATMEL_US_CHRL, 0) +#define ATMEL_US_CHRL_6 FIELD_PREP(ATMEL_US_CHRL, 1) +#define ATMEL_US_CHRL_7 FIELD_PREP(ATMEL_US_CHRL, 2) +#define ATMEL_US_CHRL_8 FIELD_PREP(ATMEL_US_CHRL, 3) #define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ #define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ -#define ATMEL_US_PAR_EVEN (0 << 9) -#define ATMEL_US_PAR_ODD (1 << 9) -#define ATMEL_US_PAR_SPACE (2 << 9) -#define ATMEL_US_PAR_MARK (3 << 9) -#define ATMEL_US_PAR_NONE (4 << 9) -#define ATMEL_US_PAR_MULTI_DROP (6 << 9) +#define ATMEL_US_PAR_EVEN FIELD_PREP(ATMEL_US_PAR, 0) +#define ATMEL_US_PAR_ODD FIELD_PREP(ATMEL_US_PAR, 1) +#define ATMEL_US_PAR_SPACE FIELD_PREP(ATMEL_US_PAR, 2) +#define ATMEL_US_PAR_MARK FIELD_PREP(ATMEL_US_PAR, 3) +#define ATMEL_US_PAR_NONE FIELD_PREP(ATMEL_US_PAR, 4) +#define ATMEL_US_PAR_MULTI_DROP FIELD_PREP(ATMEL_US_PAR, 6) #define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ -#define ATMEL_US_NBSTOP_1 (0 << 12) -#define ATMEL_US_NBSTOP_1_5 (1 << 12) -#define ATMEL_US_NBSTOP_2 (2 << 12) +#define ATMEL_US_NBSTOP_1 FIELD_PREP(ATMEL_US_NBSTOP, 0) +#define ATMEL_US_NBSTOP_1_5 FIELD_PREP(ATMEL_US_NBSTOP, 1) +#define ATMEL_US_NBSTOP_2 FIELD_PREP(ATMEL_US_NBSTOP, 2) +#define ATMEL_UA_BRSRCCK BIT(12) /* Clock Selection for UART */ #define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ -#define ATMEL_US_CHMODE_NORMAL (0 << 14) -#define ATMEL_US_CHMODE_ECHO (1 << 14) -#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) -#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) +#define ATMEL_US_CHMODE_NORMAL FIELD_PREP(ATMEL_US_CHMODE, 0) +#define ATMEL_US_CHMODE_ECHO FIELD_PREP(ATMEL_US_CHMODE, 1) +#define ATMEL_US_CHMODE_LOC_LOOP FIELD_PREP(ATMEL_US_CHMODE, 2) +#define ATMEL_US_CHMODE_REM_LOOP FIELD_PREP(ATMEL_US_CHMODE, 3) #define ATMEL_US_MSBF BIT(16) /* Bit Order */ #define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ #define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ @@ -79,7 +84,7 @@ #define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ #define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ #define ATMEL_US_MAX_ITER_MASK GENMASK(26, 24) /* Max Iterations */ -#define ATMEL_US_MAX_ITER(n) (((n) << 24) & ATMEL_US_MAX_ITER_MASK) +#define ATMEL_US_MAX_ITER(n) FIELD_PREP(ATMEL_US_MAX_ITER_MASK, (n)) #define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ #define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ @@ -131,19 +136,19 @@ #define ATMEL_US_CMPR 0x90 /* Comparaison Register */ #define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ -#define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ -#define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ +#define ATMEL_US_TXRDYM(data) FIELD_PREP(GENMASK(1, 0), (data)) /* TX Ready Mode */ +#define ATMEL_US_RXRDYM(data) FIELD_PREP(GENMASK(5, 4), (data)) /* RX Ready Mode */ #define ATMEL_US_ONE_DATA 0x0 #define ATMEL_US_TWO_DATA 0x1 #define ATMEL_US_FOUR_DATA 0x2 #define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ -#define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ -#define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ -#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ +#define ATMEL_US_TXFTHRES(thr) FIELD_PREP(GENMASK(13, 8), (thr)) /* TX FIFO Threshold */ +#define ATMEL_US_RXFTHRES(thr) FIELD_PREP(GENMASK(21, 16), (thr)) /* RX FIFO Threshold */ +#define ATMEL_US_RXFTHRES2(thr) FIELD_PREP(GENMASK(29, 24), (thr)) /* RX FIFO Threshold2 */ #define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ -#define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ -#define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ +#define ATMEL_US_TXFL(reg) FIELD_GET(GENMASK(5, 0), (reg)) /* TX FIFO Level */ +#define ATMEL_US_RXFL(reg) FIELD_GET(GENMASK(21, 16), (reg)) /* RX FIFO Level */ #define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ #define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 53b43174aa40..5d9737c2d1f2 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -492,9 +492,8 @@ static void bcm_uart_shutdown(struct uart_port *port) /* * serial core request to change current uart setting */ -static void bcm_uart_set_termios(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) +static void bcm_uart_set_termios(struct uart_port *port, struct ktermios *new, + const struct ktermios *old) { unsigned int ctl, baud, quot, ier; unsigned long flags; diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index b9b66ad31a08..404b43a5ae33 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -251,7 +251,7 @@ static void uart_clps711x_shutdown(struct uart_port *port) static void uart_clps711x_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { u32 ubrlcr; unsigned int baud, quot; diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h index 8c582779cf22..0577618e78c0 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart.h +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -87,7 +87,6 @@ struct uart_cpm_port { struct gpio_desc *gpios[NUM_GPIOS]; }; -extern int cpm_uart_nr; extern struct uart_cpm_port cpm_uart_ports[UART_NR]; /* these are located in their respective files */ diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index db07d6a5d764..b4369ed45ae2 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -484,12 +484,11 @@ static void cpm_uart_shutdown(struct uart_port *port) static void cpm_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { int baud; unsigned long flags; u16 cval, scval, prev_mode; - int bits, sbits; struct uart_cpm_port *pinfo = container_of(port, struct uart_cpm_port, port); smc_t __iomem *smcp = pinfo->smcp; @@ -515,28 +514,17 @@ static void cpm_uart_set_termios(struct uart_port *port, if (maxidl > 0x10) maxidl = 0x10; - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ cval = 0; scval = 0; - /* byte size */ - bits = tty_get_char_size(termios->c_cflag); - sbits = bits - 5; - if (termios->c_cflag & CSTOPB) { cval |= SMCMR_SL; /* Two stops */ scval |= SCU_PSMR_SL; - bits++; } if (termios->c_cflag & PARENB) { cval |= SMCMR_PEN; scval |= SCU_PSMR_PEN; - bits++; if (!(termios->c_cflag & PARODD)) { cval |= SMCMR_PM_EVEN; scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); @@ -580,12 +568,9 @@ static void cpm_uart_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); - /* Start bit has not been added (so don't, because we would just - * subtract it later), and we need to add one for the number of - * stops bits (there is always at least one). - */ - bits++; if (IS_SMC(pinfo)) { + unsigned int bits = tty_get_frame_size(termios->c_cflag); + /* * MRBLR can be changed while an SMC/SCC is operating only * if it is done in a single bus cycle with one 16-bit move @@ -604,13 +589,17 @@ static void cpm_uart_set_termios(struct uart_port *port, */ prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); /* Output in *one* operation, so we don't interrupt RX/TX if they - * were already enabled. */ - out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | - SMCMR_SM_UART | prev_mode); + * were already enabled. + * Character length programmed into the register is frame bits minus 1. + */ + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits - 1) | cval | + SMCMR_SM_UART | prev_mode); } else { + unsigned int bits = tty_get_char_size(termios->c_cflag); + out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); out_be16(&pinfo->sccup->scc_maxidl, maxidl); - out_be16(&sccp->scc_psmr, (sbits << 12) | scval); + out_be16(&sccp->scc_psmr, (UART_LCR_WLEN(bits) << 12) | scval); } if (pinfo->clk) @@ -1214,12 +1203,6 @@ static int cpm_uart_init_port(struct device_node *np, pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; spin_lock_init(&pinfo->port.lock); - pinfo->port.irq = irq_of_parse_and_map(np, 0); - if (pinfo->port.irq == NO_IRQ) { - ret = -EINVAL; - goto out_pram; - } - for (i = 0; i < NUM_GPIOS; i++) { struct gpio_desc *gpiod; @@ -1229,7 +1212,7 @@ static int cpm_uart_init_port(struct device_node *np, if (IS_ERR(gpiod)) { ret = PTR_ERR(gpiod); - goto out_irq; + goto out_pram; } if (gpiod) { @@ -1255,8 +1238,6 @@ static int cpm_uart_init_port(struct device_node *np, return cpm_uart_request_port(&pinfo->port); -out_irq: - irq_dispose_mapping(pinfo->port.irq); out_pram: cpm_uart_unmap_pram(pinfo, pram); out_mem: @@ -1436,11 +1417,17 @@ static int cpm_uart_probe(struct platform_device *ofdev) /* initialize the device pointer for the port */ pinfo->port.dev = &ofdev->dev; + pinfo->port.irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); + if (!pinfo->port.irq) + return -EINVAL; + ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); - if (ret) - return ret; + if (!ret) + return uart_add_one_port(&cpm_reg, &pinfo->port); + + irq_dispose_mapping(pinfo->port.irq); - return uart_add_one_port(&cpm_reg, &pinfo->port); + return ret; } static int cpm_uart_remove(struct platform_device *ofdev) diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index af951e6a2ef4..0c0a62346f23 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -287,7 +287,7 @@ static void digicolor_uart_shutdown(struct uart_port *port) static void digicolor_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud, divisor; u8 config = 0; diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c index 2e21acf39720..829b452daee9 100644 --- a/drivers/tty/serial/dz.c +++ b/drivers/tty/serial/dz.c @@ -559,7 +559,7 @@ static void dz_reset(struct dz_port *dport) } static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct dz_port *dport = to_dport(uport); unsigned long flags; @@ -592,9 +592,12 @@ static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); bflag = dz_encode_baud_rate(baud); - if (bflag < 0) { /* Try to keep unchanged. */ - baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600); - bflag = dz_encode_baud_rate(baud); + if (bflag < 0) { + if (old_termios) { + /* Keep unchanged. */ + baud = tty_termios_baud_rate(old_termios); + bflag = dz_encode_baud_rate(baud); + } if (bflag < 0) { /* Resort to 9600. */ baud = 9600; bflag = DZ_B9600; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 88d08ba1ca83..a5f380584cda 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -67,7 +67,7 @@ static void __init earlycon_init(struct earlycon_device *device, if (*s) earlycon->index = simple_strtoul(s, NULL, 10); len = s - name; - strlcpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name))); + strscpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name))); earlycon->data = &early_console_dev; } @@ -123,7 +123,7 @@ static int __init parse_options(struct earlycon_device *device, char *options) device->baud = simple_strtoul(options, NULL, 0); length = min(strcspn(options, " ") + 1, (size_t)(sizeof(device->options))); - strlcpy(device->options, options, length); + strscpy(device->options, options, length); } return 0; @@ -304,7 +304,7 @@ int __init of_setup_earlycon(const struct earlycon_id *match, if (options) { early_console_dev.baud = simple_strtoul(options, NULL, 0); - strlcpy(early_console_dev.options, options, + strscpy(early_console_dev.options, options, sizeof(early_console_dev.options)); } earlycon_init(&early_console_dev, match->name); diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c index 98bb0c315e13..84e8153e5420 100644 --- a/drivers/tty/serial/fsl_linflexuart.c +++ b/drivers/tty/serial/fsl_linflexuart.c @@ -401,7 +401,7 @@ static void linflex_shutdown(struct uart_port *port) static void linflex_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned long cr, old_cr, cr1; diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index fbc4b071b330..67fa113f77d4 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1284,17 +1284,12 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport) struct dma_slave_config dma_rx_sconfig = {}; struct circ_buf *ring = &sport->rx_ring; int ret, nent; - int bits, baud; struct tty_port *port = &sport->port.state->port; struct tty_struct *tty = port->tty; struct ktermios *termios = &tty->termios; struct dma_chan *chan = sport->dma_rx_chan; - - baud = tty_get_baud_rate(tty); - - bits = (termios->c_cflag & CSIZE) == CS7 ? 9 : 10; - if (termios->c_cflag & PARENB) - bits++; + unsigned int bits = tty_get_frame_size(termios->c_cflag); + unsigned int baud = tty_get_baud_rate(tty); /* * Calculate length of one DMA buffer size to keep latency below @@ -1776,6 +1771,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport) if (sport->lpuart_dma_rx_use) { del_timer_sync(&sport->lpuart_timer); lpuart_dma_rx_free(&sport->port); + sport->lpuart_dma_rx_use = false; } if (sport->lpuart_dma_tx_use) { @@ -1784,6 +1780,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport) sport->dma_tx_in_progress = false; dmaengine_terminate_all(sport->dma_tx_chan); } + sport->lpuart_dma_tx_use = false; } if (sport->dma_tx_chan) @@ -1833,7 +1830,7 @@ static void lpuart32_shutdown(struct uart_port *port) static void lpuart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long flags; @@ -2073,7 +2070,7 @@ static void lpuart32_serial_setbrg(struct lpuart_port *sport, static void lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long flags; @@ -2729,15 +2726,13 @@ static int lpuart_probe(struct platform_device *pdev) if (ret) goto failed_reset; - ret = uart_add_one_port(&lpuart_reg, &sport->port); - if (ret) - goto failed_attach_port; - ret = uart_get_rs485_mode(&sport->port); if (ret) goto failed_get_rs485; - uart_rs485_config(&sport->port); + ret = uart_add_one_port(&lpuart_reg, &sport->port); + if (ret) + goto failed_attach_port; ret = devm_request_irq(&pdev->dev, sport->port.irq, handler, 0, DRIVER_NAME, sport); @@ -2747,9 +2742,9 @@ static int lpuart_probe(struct platform_device *pdev) return 0; failed_irq_request: -failed_get_rs485: uart_remove_one_port(&lpuart_reg, &sport->port); failed_attach_port: +failed_get_rs485: failed_reset: lpuart_disable_clks(sport); return ret; @@ -2800,7 +2795,7 @@ static int __maybe_unused lpuart_suspend(struct device *dev) * EDMA driver during suspend will forcefully release any * non-idle DMA channels. If port wakeup is enabled or if port * is console port or 'no_console_suspend' is set the Rx DMA - * cannot resume as as expected, hence gracefully release the + * cannot resume as expected, hence gracefully release the * Rx DMA path before suspend and start Rx DMA path on resume. */ if (irq_wake) { diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 45df29947fe8..819f957b6b84 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -1351,9 +1351,8 @@ static void icom_close(struct uart_port *port) kref_put(&icom_port->adapter->kref, icom_kref_release); } -static void icom_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old_termios) +static void icom_set_termios(struct uart_port *port, struct ktermios *termios, + const struct ktermios *old_termios) { struct icom_port *icom_port = to_icom_port(port); int baud; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 522445a8f666..05b432dc7a85 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -380,8 +380,7 @@ static void imx_uart_rts_active(struct imx_port *sport, u32 *ucr2) { *ucr2 &= ~(UCR2_CTSC | UCR2_CTS); - sport->port.mctrl |= TIOCM_RTS; - mctrl_gpio_set(sport->gpios, sport->port.mctrl); + mctrl_gpio_set(sport->gpios, sport->port.mctrl | TIOCM_RTS); } /* called with port.lock taken and irqs caller dependent */ @@ -390,8 +389,7 @@ static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2) *ucr2 &= ~UCR2_CTSC; *ucr2 |= UCR2_CTS; - sport->port.mctrl &= ~TIOCM_RTS; - mctrl_gpio_set(sport->gpios, sport->port.mctrl); + mctrl_gpio_set(sport->gpios, sport->port.mctrl & ~TIOCM_RTS); } static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec) @@ -1620,7 +1618,7 @@ static void imx_uart_flush_buffer(struct uart_port *port) static void imx_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct imx_port *sport = (struct imx_port *)port; unsigned long flags; @@ -2347,8 +2345,6 @@ static int imx_uart_probe(struct platform_device *pdev) dev_err(&pdev->dev, "low-active RTS not possible when receiver is off, enabling receiver\n"); - uart_rs485_config(&sport->port); - /* Disable interrupts before requesting them */ ucr1 = imx_uart_readl(sport, UCR1); ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c index 655e64b26852..dd0a8915ce4f 100644 --- a/drivers/tty/serial/ip22zilog.c +++ b/drivers/tty/serial/ip22zilog.c @@ -873,7 +873,7 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, /* The port lock is not held. */ static void ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_ip22zilog_port *up = container_of(port, struct uart_ip22zilog_port, port); diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 0ea799bf8dbb..417a5b6bffc3 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -211,7 +211,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) break; default: - return -ENXIO; + rc = -ENXIO; + goto out_kfree_brd; } rc = request_irq(brd->irq, brd->bd_ops->intr, IRQF_SHARED, "JSM", brd); diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index cb58bdec2f43..222afc270c88 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -300,8 +300,8 @@ static void jsm_tty_close(struct uart_port *port) } static void jsm_tty_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old_termios) + struct ktermios *termios, + const struct ktermios *old_termios) { unsigned long lock_flags; struct jsm_channel *channel = diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index a3120c3347dd..c892f3c7d1ab 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -8,6 +8,7 @@ * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com> */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/console.h> #include <linux/device.h> @@ -93,7 +94,6 @@ #define ASCFSTAT_RXFFLMASK 0x003F #define ASCFSTAT_TXFFLMASK 0x3F00 #define ASCFSTAT_TXFREEMASK 0x3F000000 -#define ASCFSTAT_TXFREEOFF 24 static void lqasc_tx_chars(struct uart_port *port); static struct ltq_uart_port *lqasc_port[MAXPORTS]; @@ -139,6 +139,13 @@ lqasc_stop_tx(struct uart_port *port) return; } +static bool lqasc_tx_ready(struct uart_port *port) +{ + u32 fstat = __raw_readl(port->membase + LTQ_ASC_FSTAT); + + return FIELD_GET(ASCFSTAT_TXFREEMASK, fstat); +} + static void lqasc_start_tx(struct uart_port *port) { @@ -228,8 +235,7 @@ lqasc_tx_chars(struct uart_port *port) return; } - while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) & - ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) { + while (lqasc_tx_ready(port)) { if (port->x_char) { writeb(port->x_char, port->membase + LTQ_ASC_TBUF); port->icount.tx++; @@ -405,8 +411,8 @@ lqasc_shutdown(struct uart_port *port) } static void -lqasc_set_termios(struct uart_port *port, - struct ktermios *new, struct ktermios *old) +lqasc_set_termios(struct uart_port *port, struct ktermios *new, + const struct ktermios *old) { unsigned int cflag; unsigned int iflag; @@ -600,15 +606,12 @@ static const struct uart_ops lqasc_pops = { static void lqasc_console_putchar(struct uart_port *port, unsigned char ch) { - int fifofree; - if (!port->membase) return; - do { - fifofree = (__raw_readl(port->membase + LTQ_ASC_FSTAT) - & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF; - } while (fifofree == 0); + while (!lqasc_tx_ready(port)) + ; + writeb(ch, port->membase + LTQ_ASC_TBUF); } diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c index 328b50521f14..4c0604325ee9 100644 --- a/drivers/tty/serial/liteuart.c +++ b/drivers/tty/serial/liteuart.c @@ -178,7 +178,7 @@ static void liteuart_shutdown(struct uart_port *port) } static void liteuart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned long flags; diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 93140cac1ca1..ed47f4768338 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -278,6 +278,13 @@ static void __serial_lpc32xx_rx(struct uart_port *port) static void serial_lpc32xx_stop_tx(struct uart_port *port); +static bool serial_lpc32xx_tx_ready(struct uart_port *port) +{ + u32 level = readl(LPC32XX_HSUART_LEVEL(port->membase)); + + return LPC32XX_HSU_TX_LEV(level) < 64; +} + static void __serial_lpc32xx_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; @@ -293,8 +300,7 @@ static void __serial_lpc32xx_tx(struct uart_port *port) goto exit_tx; /* Transfer data */ - while (LPC32XX_HSU_TX_LEV(readl( - LPC32XX_HSUART_LEVEL(port->membase))) < 64) { + while (serial_lpc32xx_tx_ready(port)) { writel((u32) xmit->buf[xmit->tail], LPC32XX_HSUART_FIFO(port->membase)); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -493,7 +499,7 @@ static void serial_lpc32xx_shutdown(struct uart_port *port) /* port->lock is not held. */ static void serial_lpc32xx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, quot; diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 0b5f21fbb53d..c69602f356fd 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -418,7 +418,7 @@ static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) static void max3100_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct max3100_port *s = container_of(port, struct max3100_port, diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 7cf81f692ac4..fbf6e2b3161c 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -906,7 +906,7 @@ static void max310x_break_ctl(struct uart_port *port, int break_state) static void max310x_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int lcr = 0, flow = 0; int baud; diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index f4aaaadd0742..b1cd9a76dd93 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -192,7 +192,7 @@ static void mcf_shutdown(struct uart_port *port) /****************************************************************************/ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, baudclk; diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index 12117b596e73..3690f5cf0f43 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -646,8 +646,8 @@ static void men_z135_shutdown(struct uart_port *port) } static void men_z135_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { struct men_z135_port *uart = to_men_z135(port); unsigned int baud; diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 6c8db19fd572..056243c12836 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -335,7 +335,7 @@ static void meson_uart_change_speed(struct uart_port *port, unsigned long baud) static void meson_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int cflags, iflags, baud; unsigned long flags; @@ -667,29 +667,6 @@ static struct uart_driver meson_uart_driver = { .cons = MESON_SERIAL_CONSOLE, }; -static inline struct clk *meson_uart_probe_clock(struct device *dev, - const char *id) -{ - struct clk *clk = NULL; - int ret; - - clk = devm_clk_get(dev, id); - if (IS_ERR(clk)) - return clk; - - ret = clk_prepare_enable(clk); - if (ret) { - dev_err(dev, "couldn't enable clk\n"); - return ERR_PTR(ret); - } - - devm_add_action_or_reset(dev, - (void(*)(void *))clk_disable_unprepare, - clk); - - return clk; -} - static int meson_uart_probe_clocks(struct platform_device *pdev, struct uart_port *port) { @@ -697,15 +674,15 @@ static int meson_uart_probe_clocks(struct platform_device *pdev, struct clk *clk_pclk = NULL; struct clk *clk_baud = NULL; - clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk"); + clk_pclk = devm_clk_get_enabled(&pdev->dev, "pclk"); if (IS_ERR(clk_pclk)) return PTR_ERR(clk_pclk); - clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal"); + clk_xtal = devm_clk_get_enabled(&pdev->dev, "xtal"); if (IS_ERR(clk_xtal)) return PTR_ERR(clk_xtal); - clk_baud = meson_uart_probe_clock(&pdev->dev, "baud"); + clk_baud = devm_clk_get_enabled(&pdev->dev, "baud"); if (IS_ERR(clk_baud)) return PTR_ERR(clk_baud); diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c index 347088bb380e..c15e0d84dc7e 100644 --- a/drivers/tty/serial/milbeaut_usio.c +++ b/drivers/tty/serial/milbeaut_usio.c @@ -298,7 +298,8 @@ static void mlb_usio_shutdown(struct uart_port *port) } static void mlb_usio_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { unsigned int escr, smr = MLB_USIO_SMR_SOE; unsigned long flags, baud, quot; diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 3f1986c89694..73362d4bc45d 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -101,7 +101,7 @@ struct psc_ops { void (*cw_restore_ints)(struct uart_port *port); unsigned int (*set_baudrate)(struct uart_port *port, struct ktermios *new, - struct ktermios *old); + const struct ktermios *old); int (*clock_alloc)(struct uart_port *port); void (*clock_relse)(struct uart_port *port); int (*clock)(struct uart_port *port, int enable); @@ -287,7 +287,7 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned int divisor; @@ -305,7 +305,7 @@ static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned int divisor; @@ -533,7 +533,7 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port) static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned int divisor; @@ -880,7 +880,7 @@ static inline void mpc5125_set_divisor(struct mpc5125_psc __iomem *psc, static unsigned int mpc5125_psc_set_baudrate(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud; unsigned int divisor; @@ -1167,7 +1167,7 @@ mpc52xx_uart_shutdown(struct uart_port *port) static void mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned char mr1, mr2; @@ -1364,7 +1364,7 @@ static const struct uart_ops mpc52xx_uart_ops = { /* Interrupt handling */ /* ======================================================================== */ -static inline unsigned int +static inline bool mpc52xx_uart_int_rx_chars(struct uart_port *port) { struct tty_port *tport = &port->state->port; @@ -1425,7 +1425,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port) return psc_ops->raw_rx_rdy(port); } -static inline int +static inline bool mpc52xx_uart_int_tx_chars(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; @@ -1435,13 +1435,13 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port) psc_ops->write_char(port, port->x_char); port->icount.tx++; port->x_char = 0; - return 1; + return true; } /* Nothing to do ? */ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { mpc52xx_uart_stop_tx(port); - return 0; + return false; } /* Send chars */ @@ -1460,23 +1460,23 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port) /* Maybe we're done after all */ if (uart_circ_empty(xmit)) { mpc52xx_uart_stop_tx(port); - return 0; + return false; } - return 1; + return true; } static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port) { unsigned long pass = ISR_PASS_LIMIT; - unsigned int keepgoing; + bool keepgoing; u8 status; /* While we have stuff to do, we continue */ do { /* If we don't find anything to do, we stop */ - keepgoing = 0; + keepgoing = false; psc_ops->rx_clr_irq(port); if (psc_ops->rx_rdy(port)) @@ -1495,7 +1495,7 @@ mpc5xxx_uart_process_int(struct uart_port *port) /* Limit number of iteration */ if (!(--pass)) - keepgoing = 0; + keepgoing = false; } while (keepgoing); diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c index 5e9429dcc51f..2e3e6cf16817 100644 --- a/drivers/tty/serial/mps2-uart.c +++ b/drivers/tty/serial/mps2-uart.c @@ -358,7 +358,7 @@ static void mps2_uart_shutdown(struct uart_port *port) static void mps2_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, bauddiv; diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 3159889ddae1..7dd19a281579 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -1263,7 +1263,7 @@ static void msm_shutdown(struct uart_port *port) } static void msm_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct msm_port *msm_port = to_msm_port(port); struct msm_dma *dma = &msm_port->rx_dma; diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index 0ba0f4d9459d..ed0e763f622a 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -289,7 +289,7 @@ static void mux_shutdown(struct uart_port *port) */ static void mux_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { } diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 65eaecd10b7c..ba16e1da6bd3 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -564,7 +564,7 @@ static unsigned int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned in static void mvebu_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, min_baud, max_baud; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 1944daf8593a..d21a4f3ef2fe 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -959,7 +959,7 @@ err_out: #define CTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_CTS) static void mxs_auart_settermios(struct uart_port *u, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct mxs_auart_port *s = to_auart_port(u); u32 ctrl, ctrl2, div; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 0aa666e247d5..7d0d2718ef59 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -300,8 +300,7 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_OMAP_SCR, up->scr); res = (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0; - if (up->rts_gpiod && - gpiod_get_value(up->rts_gpiod) != res) { + if (gpiod_get_value(up->rts_gpiod) != res) { if (port->rs485.delay_rts_after_send > 0) mdelay( port->rs485.delay_rts_after_send); @@ -337,19 +336,24 @@ static void serial_omap_stop_rx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } +static void serial_omap_put_char(struct uart_omap_port *up, unsigned char ch) +{ + serial_out(up, UART_TX, ch); + + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) + up->rs485_tx_filter_count++; +} + static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) { struct circ_buf *xmit = &up->port.state->xmit; int count; if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); + serial_omap_put_char(up, up->port.x_char); up->port.icount.tx++; up->port.x_char = 0; - if ((up->port.rs485.flags & SER_RS485_ENABLED) && - !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) - up->rs485_tx_filter_count++; - return; } if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { @@ -358,12 +362,9 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) } count = up->port.fifosize / 4; do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); + serial_omap_put_char(up, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); up->port.icount.tx++; - if ((up->port.rs485.flags & SER_RS485_ENABLED) && - !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) - up->rs485_tx_filter_count++; if (uart_circ_empty(xmit)) break; @@ -397,7 +398,7 @@ static void serial_omap_start_tx(struct uart_port *port) /* if rts not already enabled */ res = (port->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0; - if (up->rts_gpiod && gpiod_get_value(up->rts_gpiod) != res) { + if (gpiod_get_value(up->rts_gpiod) != res) { gpiod_set_value(up->rts_gpiod, res); if (port->rs485.delay_rts_before_send > 0) mdelay(port->rs485.delay_rts_before_send); @@ -802,7 +803,7 @@ static void serial_omap_uart_qos_work(struct work_struct *work) static void serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_omap_port *up = to_uart_omap_port(port); unsigned char cval = 0; @@ -1336,13 +1337,11 @@ serial_omap_config_rs485(struct uart_port *port, struct ktermios *termios, up->ier = 0; serial_out(up, UART_IER, 0); - if (up->rts_gpiod) { - /* enable / disable rts */ - val = (rs485->flags & SER_RS485_ENABLED) ? - SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; - val = (rs485->flags & val) ? 1 : 0; - gpiod_set_value(up->rts_gpiod, val); - } + /* enable / disable rts */ + val = (rs485->flags & SER_RS485_ENABLED) ? + SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; + val = (rs485->flags & val) ? 1 : 0; + gpiod_set_value(up->rts_gpiod, val); /* Enable interrupts */ up->ier = mode; @@ -1547,11 +1546,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, ret = PTR_ERR(up->rts_gpiod); if (ret == -EPROBE_DEFER) return ret; - /* - * FIXME: the code historically ignored any other error than - * -EPROBE_DEFER and just went on without GPIO. - */ + up->rts_gpiod = NULL; + up->port.rs485_supported = (const struct serial_rs485) { }; + if (rs485conf->flags & SER_RS485_ENABLED) { + dev_err(dev, "disabling RS-485 (rts-gpio missing in device tree)\n"); + memset(rs485conf, 0, sizeof(*rs485conf)); + } } else { gpiod_set_consumer_name(up->rts_gpiod, "omap-serial"); } diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index 888e17e3f25f..fde39cc1145d 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -328,7 +328,7 @@ static void owl_uart_change_baudrate(struct owl_uart_port *owl_port, static void owl_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct owl_uart_port *owl_port = to_owl_uart_port(port); unsigned int baud; diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 8a9065e4a903..c59ce7886579 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -898,9 +898,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) fifo_size--; } - bytes = min((int)CIRC_CNT(xmit->head, xmit->tail, - UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, - xmit->tail, UART_XMIT_SIZE)); + bytes = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); if (!bytes) { dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); @@ -1301,7 +1299,8 @@ static void pch_uart_shutdown(struct uart_port *port) *bits. Update read_status_mask and ignore_status_mask to indicate *the types of events we are interested in receiving. */ static void pch_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { int rtn; unsigned int baud, parity, bits, stb; diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c index f418f1de66b3..2beada66c824 100644 --- a/drivers/tty/serial/pic32_uart.c +++ b/drivers/tty/serial/pic32_uart.c @@ -50,7 +50,7 @@ * @irq_rx_name: irq rx name * @irq_tx: virtual tx interrupt number * @irq_tx_name: irq tx name - * @cts_gpio: clear to send gpio + * @cts_gpiod: clear to send GPIO * @dev: device descriptor **/ struct pic32_sport { @@ -65,8 +65,7 @@ struct pic32_sport { const char *irq_tx_name; bool enable_tx_irq; - bool hw_flow_ctrl; - int cts_gpio; + struct gpio_desc *cts_gpiod; struct clk *clk; @@ -158,25 +157,16 @@ static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) PIC32_UART_MODE_LPBK); } -/* get the state of CTS input pin for this port */ -static unsigned int get_cts_state(struct pic32_sport *sport) -{ - /* read and invert UxCTS */ - if (gpio_is_valid(sport->cts_gpio)) - return !gpio_get_value(sport->cts_gpio); - - return 1; -} - /* serial core request to return the state of misc UART input pins */ static unsigned int pic32_uart_get_mctrl(struct uart_port *port) { struct pic32_sport *sport = to_pic32_sport(port); unsigned int mctrl = 0; - if (!sport->hw_flow_ctrl) + /* get the state of CTS input pin for this port */ + if (!sport->cts_gpiod) mctrl |= TIOCM_CTS; - else if (get_cts_state(sport)) + else if (gpiod_get_value(sport->cts_gpiod)) mctrl |= TIOCM_CTS; /* DSR and CD are not supported in PIC32, so return 1 @@ -609,7 +599,7 @@ static void pic32_uart_shutdown(struct uart_port *port) /* serial core request to change current uart setting */ static void pic32_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { struct pic32_sport *sport = to_pic32_sport(port); unsigned int baud; @@ -648,7 +638,7 @@ static void pic32_uart_set_termios(struct uart_port *port, PIC32_UART_MODE_PDSEL0); } /* if hw flow ctrl, then the pins must be specified in device tree */ - if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) { + if ((new->c_cflag & CRTSCTS) && sport->cts_gpiod) { /* enable hardware flow control */ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), PIC32_UART_MODE_UEN1); @@ -875,7 +865,8 @@ static struct uart_driver pic32_uart_driver = { static int pic32_uart_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; struct pic32_sport *sport; int uart_idx = 0; struct resource *res_mem; @@ -904,25 +895,10 @@ static int pic32_uart_probe(struct platform_device *pdev) /* Hardware flow control: gpios * !Note: Basically, CTS is needed for reading the status. */ - sport->hw_flow_ctrl = false; - sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0); - if (gpio_is_valid(sport->cts_gpio)) { - sport->hw_flow_ctrl = true; - - ret = devm_gpio_request(sport->dev, - sport->cts_gpio, "CTS"); - if (ret) { - dev_err(&pdev->dev, - "error requesting CTS GPIO\n"); - goto err; - } - - ret = gpio_direction_input(sport->cts_gpio); - if (ret) { - dev_err(&pdev->dev, "error setting CTS GPIO\n"); - goto err; - } - } + sport->cts_gpiod = devm_gpiod_get_optional(dev, "cts", GPIOD_IN); + if (IS_ERR(sport->cts_gpiod)) + return dev_err_probe(dev, PTR_ERR(sport->cts_gpiod), "error requesting CTS GPIO\n"); + gpiod_set_consumer_name(sport->cts_gpiod, "CTS"); pic32_sports[uart_idx] = sport; port = &sport->port; @@ -943,7 +919,7 @@ static int pic32_uart_probe(struct platform_device *pdev) } #ifdef CONFIG_SERIAL_PIC32_CONSOLE - if (uart_console(port) && (pic32_console.flags & CON_ENABLED)) { + if (uart_console_enabled(port)) { /* The peripheral clock has been enabled by console_setup, * so disable it till the port is used. */ diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index f63257b8e872..fe2e4ec423f7 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1202,7 +1202,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_pmac_port *uap = to_pmz(port); unsigned long baud; @@ -1244,7 +1244,7 @@ static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, /* The port lock is not held. */ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_pmac_port *uap = to_pmz(port); unsigned long flags; diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 9309ffd87c8e..2d25231fad84 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -423,7 +423,7 @@ static void serial_pxa_shutdown(struct uart_port *port) static void serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned char cval, fcr = 0; diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index f4698a064a4d..83b66b73303a 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -22,6 +22,7 @@ #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_flip.h> +#include <dt-bindings/interconnect/qcom,icc.h> /* UART specific GENI registers */ #define SE_UART_LOOPBACK_CFG 0x22c @@ -1005,7 +1006,8 @@ static unsigned long get_clk_div_rate(struct clk *clk, unsigned int baud, } static void qcom_geni_serial_set_termios(struct uart_port *uport, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { unsigned int baud; u32 bits_per_char; @@ -1524,7 +1526,7 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev) * even with no_console_suspend */ if (uart_console(uport)) { - geni_icc_set_tag(&port->se, 0x3); + geni_icc_set_tag(&port->se, QCOM_ICC_TAG_ACTIVE_ONLY); geni_icc_set_bw(&port->se); } return uart_suspend_port(private_data->drv, uport); @@ -1539,7 +1541,7 @@ static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev) ret = uart_resume_port(private_data->drv, uport); if (uart_console(uport)) { - geni_icc_set_tag(&port->se, 0x7); + geni_icc_set_tag(&port->se, QCOM_ICC_TAG_ALWAYS); geni_icc_set_bw(&port->se); } return ret; diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index feb2054aba37..0e387e2144fa 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -238,7 +238,7 @@ static void rda_uart_change_baudrate(struct rda_uart_port *rda_port, static void rda_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct rda_uart_port *rda_port = to_rda_uart_port(port); unsigned long flags; diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c index 6689d8add8f7..b81afb06f1f4 100644 --- a/drivers/tty/serial/rp2.c +++ b/drivers/tty/serial/rp2.c @@ -370,9 +370,8 @@ static void __rp2_uart_set_termios(struct rp2_uart_port *up, up->ucode + RP2_RX_SWFLOW); } -static void rp2_uart_set_termios(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) +static void rp2_uart_set_termios(struct uart_port *port, struct ktermios *new, + const struct ktermios *old) { struct rp2_uart_port *up = port_to_up(port); unsigned long flags; diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index e64e42a19d1a..dd9e3253cab4 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -409,7 +409,7 @@ static void sa1100_shutdown(struct uart_port *port) static void sa1100_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct sa1100_port *sport = container_of(port, struct sa1100_port, port); diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index b7a4b47ce74e..77d1363029f5 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -1530,7 +1530,7 @@ static const u16 udivslot_table[16] = { static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index 2cf8533ef760..c5d2b6cdcb4a 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -531,7 +531,7 @@ static void sbd_init_port(struct sbd_port *sport) } static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct sbd_port *sport = to_sport(uport); unsigned int mode1 = 0, mode2 = 0, aux = 0; diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index d983692c59e0..524921360ca7 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1015,7 +1015,7 @@ static void sc16is7xx_break_ctl(struct uart_port *port, int break_state) static void sc16is7xx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index c56de2e104d4..dd98509f52e5 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -636,7 +636,8 @@ static void sccnxp_break_ctl(struct uart_port *port, int break_state) } static void sccnxp_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { struct sccnxp_port *s = dev_get_drvdata(port->dev); unsigned long flags; diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index a5748e41483b..b7170cb9a544 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1270,14 +1270,14 @@ static void tegra_uart_enable_ms(struct uart_port *u) } static void tegra_uart_set_termios(struct uart_port *u, - struct ktermios *termios, struct ktermios *oldtermios) + struct ktermios *termios, + const struct ktermios *oldtermios) { struct tegra_uart_port *tup = to_tegra_uport(u); unsigned int baud; unsigned long flags; unsigned int lcr; unsigned char char_bits; - int symb_bit = 1; struct clk *parent_clk = clk_get_parent(tup->uart_clk); unsigned long parent_clk_rate = clk_get_rate(parent_clk); int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF; @@ -1304,7 +1304,6 @@ static void tegra_uart_set_termios(struct uart_port *u, termios->c_cflag &= ~CMSPAR; if ((termios->c_cflag & PARENB) == PARENB) { - symb_bit++; if (termios->c_cflag & PARODD) { lcr |= UART_LCR_PARITY; lcr &= ~UART_LCR_EPAR; @@ -1317,22 +1316,18 @@ static void tegra_uart_set_termios(struct uart_port *u, } char_bits = tty_get_char_size(termios->c_cflag); - symb_bit += char_bits; lcr &= ~UART_LCR_WLEN8; lcr |= UART_LCR_WLEN(char_bits); /* Stop bits */ - if (termios->c_cflag & CSTOPB) { + if (termios->c_cflag & CSTOPB) lcr |= UART_LCR_STOP; - symb_bit += 2; - } else { + else lcr &= ~UART_LCR_STOP; - symb_bit++; - } tegra_uart_write(tup, lcr, UART_LCR); tup->lcr_shadow = lcr; - tup->symb_bit = symb_bit; + tup->symb_bit = tty_get_frame_size(termios->c_cflag); /* Baud rate. */ baud = uart_get_baud_rate(u, termios, oldtermios, diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 12c87cd201a7..179ee199df34 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -49,7 +49,7 @@ static struct lock_class_key port_lock_key; #define RS485_MAX_RTS_DELAY 100 /* msecs */ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - struct ktermios *old_termios); + const struct ktermios *old_termios); static void uart_wait_until_sent(struct tty_struct *tty, int timeout); static void uart_change_pm(struct uart_state *state, enum uart_pm_state pm_state); @@ -158,15 +158,10 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) unsigned long flags; unsigned int old; - if (port->rs485.flags & SER_RS485_ENABLED) { - set &= ~TIOCM_RTS; - clear &= ~TIOCM_RTS; - } - spin_lock_irqsave(&port->lock, flags); old = port->mctrl; port->mctrl = (old & ~clear) | set; - if (old != port->mctrl) + if (old != port->mctrl && !(port->rs485.flags & SER_RS485_ENABLED)) port->ops->set_mctrl(port, port->mctrl); spin_unlock_irqrestore(&port->lock, flags); } @@ -380,7 +375,7 @@ EXPORT_SYMBOL(uart_update_timeout); */ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, - struct ktermios *old, unsigned int min, unsigned int max) + const struct ktermios *old, unsigned int min, unsigned int max) { unsigned int try; unsigned int baud; @@ -492,7 +487,7 @@ EXPORT_SYMBOL(uart_get_divisor); /* Caller holds port mutex */ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct uart_port *uport = uart_port_check(state); struct ktermios *termios; @@ -1391,7 +1386,7 @@ static void uart_set_rs485_termination(struct uart_port *port, !!(rs485->flags & SER_RS485_TERMINATE_BUS)); } -int uart_rs485_config(struct uart_port *port) +static int uart_rs485_config(struct uart_port *port) { struct serial_rs485 *rs485 = &port->rs485; int ret; @@ -1405,7 +1400,6 @@ int uart_rs485_config(struct uart_port *port) return ret; } -EXPORT_SYMBOL_GPL(uart_rs485_config); static int uart_get_rs485_config(struct uart_port *port, struct serial_rs485 __user *rs485) @@ -1444,8 +1438,13 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, spin_lock_irqsave(&port->lock, flags); ret = port->rs485_config(port, &tty->termios, &rs485); - if (!ret) + if (!ret) { port->rs485 = rs485; + + /* Reset RTS and other mctrl lines when disabling RS485 */ + if (!(rs485.flags & SER_RS485_ENABLED)) + port->ops->set_mctrl(port, port->mctrl); + } spin_unlock_irqrestore(&port->lock, flags); if (ret) return ret; @@ -1619,7 +1618,7 @@ static void uart_set_ldisc(struct tty_struct *tty) } static void uart_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct uart_state *state = tty->driver_data; struct uart_port *uport; @@ -2352,7 +2351,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_irq(&uport->lock); ops->stop_tx(uport); - ops->set_mctrl(uport, 0); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, 0); /* save mctrl so it can be restored on resume */ mctrl = uport->mctrl; uport->mctrl = 0; @@ -2440,7 +2440,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) uart_change_pm(state, UART_PM_STATE_ON); spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, 0); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); if (console_suspend_enabled || !uart_console(uport)) { /* Protected by port mutex for now */ @@ -2451,7 +2452,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) if (tty) uart_change_speed(tty, state, NULL); spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, uport->mctrl); + else + uart_rs485_config(uport); ops->start_tx(uport); spin_unlock_irq(&uport->lock); tty_port_set_initialized(port, 1); @@ -2497,7 +2501,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) "MMIO 0x%llx", (unsigned long long)port->mapbase); break; default: - strlcpy(address, "*unknown*", sizeof(address)); + strscpy(address, "*unknown*", sizeof(address)); break; } @@ -2558,10 +2562,10 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, */ spin_lock_irqsave(&port->lock, flags); port->mctrl &= TIOCM_DTR; - if (port->rs485.flags & SER_RS485_ENABLED && - !(port->rs485.flags & SER_RS485_RTS_AFTER_SEND)) - port->mctrl |= TIOCM_RTS; - port->ops->set_mctrl(port, port->mctrl); + if (!(port->rs485.flags & SER_RS485_ENABLED)) + port->ops->set_mctrl(port, port->mctrl); + else + uart_rs485_config(port); spin_unlock_irqrestore(&port->lock, flags); /* diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 228e380db080..e12f1dc18c38 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -594,7 +594,7 @@ static void serial_txx9_shutdown(struct uart_port *up) static void serial_txx9_set_termios(struct uart_port *up, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int cval, fcr = 0; unsigned long flags; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 0075a1420005..62f773286d44 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1407,10 +1407,8 @@ static void sci_dma_tx_work_fn(struct work_struct *work) spin_lock_irq(&port->lock); head = xmit->head; tail = xmit->tail; - buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1)); - s->tx_dma_len = min_t(unsigned int, - CIRC_CNT(head, tail, UART_XMIT_SIZE), - CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE)); + buf = s->tx_dma_addr + tail; + s->tx_dma_len = CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE); if (!s->tx_dma_len) { /* Transmit buffer has been flushed */ spin_unlock_irq(&port->lock); @@ -2367,7 +2365,7 @@ static void sci_reset(struct uart_port *port) } static void sci_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud, smr_val = SCSMR_ASYNC, scr_val = 0, i, bits; unsigned int brr = 255, cks = 0, srr = 15, dl = 0, sccks = 0; diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 4b1d4fe8458e..7fb6760b5c37 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -646,7 +646,7 @@ static int sifive_serial_clk_notifier(struct notifier_block *nb, static void sifive_serial_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); unsigned long flags; diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 4329b9c9cbf0..342a87967631 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -771,9 +771,8 @@ static void sprd_shutdown(struct uart_port *port) devm_free_irq(port->dev, port->irq, port); } -static void sprd_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) +static void sprd_set_termios(struct uart_port *port, struct ktermios *termios, + const struct ktermios *old) { unsigned int baud, quot; unsigned int lcr = 0, fc; diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index cce42f4c9bc2..fcecea689a0d 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -500,7 +500,7 @@ static void asc_pm(struct uart_port *port, unsigned int state, } static void asc_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct asc_port *ascport = to_asc_port(port); struct gpio_desc *gpiod; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 2c85dbf165c4..dfdbcf092fac 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -37,7 +37,7 @@ /* Register offsets */ -static struct stm32_usart_info stm32f4_info = { +static struct stm32_usart_info __maybe_unused stm32f4_info = { .ofs = { .isr = 0x00, .rdr = 0x04, @@ -58,7 +58,7 @@ static struct stm32_usart_info stm32f4_info = { } }; -static struct stm32_usart_info stm32f7_info = { +static struct stm32_usart_info __maybe_unused stm32f7_info = { .ofs = { .cr1 = 0x00, .cr2 = 0x04, @@ -80,7 +80,7 @@ static struct stm32_usart_info stm32f7_info = { } }; -static struct stm32_usart_info stm32h7_info = { +static struct stm32_usart_info __maybe_unused stm32h7_info = { .ofs = { .cr1 = 0x00, .cr2 = 0x04, @@ -131,6 +131,53 @@ static void stm32_usart_clr_bits(struct uart_port *port, u32 reg, u32 bits) writel_relaxed(val, port->membase + reg); } +static unsigned int stm32_usart_tx_empty(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC) + return TIOCSER_TEMT; + + return 0; +} + +static void stm32_usart_rs485_rts_enable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct serial_rs485 *rs485conf = &port->rs485; + + if (stm32_port->hw_flow_control || + !(rs485conf->flags & SER_RS485_ENABLED)) + return; + + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); + } else { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); + } +} + +static void stm32_usart_rs485_rts_disable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct serial_rs485 *rs485conf = &port->rs485; + + if (stm32_port->hw_flow_control || + !(rs485conf->flags & SER_RS485_ENABLED)) + return; + + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); + } else { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); + } +} + static void stm32_usart_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, u32 delay_DDE, u32 baud) { @@ -214,6 +261,12 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + /* Adjust RTS polarity in case it's driven in software */ + if (stm32_usart_tx_empty(port)) + stm32_usart_rs485_rts_disable(port); + else + stm32_usart_rs485_rts_enable(port); + return 0; } @@ -529,42 +582,6 @@ static void stm32_usart_tc_interrupt_disable(struct uart_port *port) stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TCIE); } -static void stm32_usart_rs485_rts_enable(struct uart_port *port) -{ - struct stm32_port *stm32_port = to_stm32_port(port); - struct serial_rs485 *rs485conf = &port->rs485; - - if (stm32_port->hw_flow_control || - !(rs485conf->flags & SER_RS485_ENABLED)) - return; - - if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl | TIOCM_RTS); - } else { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl & ~TIOCM_RTS); - } -} - -static void stm32_usart_rs485_rts_disable(struct uart_port *port) -{ - struct stm32_port *stm32_port = to_stm32_port(port); - struct serial_rs485 *rs485conf = &port->rs485; - - if (stm32_port->hw_flow_control || - !(rs485conf->flags & SER_RS485_ENABLED)) - return; - - if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl & ~TIOCM_RTS); - } else { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl | TIOCM_RTS); - } -} - static void stm32_usart_transmit_chars_pio(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); @@ -807,17 +824,6 @@ static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) return IRQ_HANDLED; } -static unsigned int stm32_usart_tx_empty(struct uart_port *port) -{ - struct stm32_port *stm32_port = to_stm32_port(port); - const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - - if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC) - return TIOCSER_TEMT; - - return 0; -} - static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct stm32_port *stm32_port = to_stm32_port(port); @@ -1089,7 +1095,7 @@ static void stm32_usart_shutdown(struct uart_port *port) static void stm32_usart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index eafada8fb6fa..1938ba5e98c0 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -323,7 +323,7 @@ static void sunhv_shutdown(struct uart_port *port) /* port->lock is not held. */ static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); unsigned int quot = uart_get_divisor(port, baud); diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c index 60c73662f955..7afe61a0e72e 100644 --- a/drivers/tty/serial/sunplus-uart.c +++ b/drivers/tty/serial/sunplus-uart.c @@ -333,7 +333,7 @@ static void sunplus_shutdown(struct uart_port *port) static void sunplus_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *oldtermios) + const struct ktermios *oldtermios) { u32 ext, div, div_l, div_h, baud, lcr; u32 clk = port->uartclk; diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 6ea52293d9f3..99608b2a2b74 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -681,27 +681,23 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla unsigned int quot) { unsigned char dafo; - int bits, n, m; + int n, m; /* Byte size and parity */ switch (cflag & CSIZE) { - case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; - case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; - case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; - case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; + case CS5: dafo = SAB82532_DAFO_CHL5; break; + case CS6: dafo = SAB82532_DAFO_CHL6; break; + case CS7: dafo = SAB82532_DAFO_CHL7; break; + case CS8: dafo = SAB82532_DAFO_CHL8; break; /* Never happens, but GCC is too dumb to figure it out */ - default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + default: dafo = SAB82532_DAFO_CHL5; break; } - if (cflag & CSTOPB) { + if (cflag & CSTOPB) dafo |= SAB82532_DAFO_STOP; - bits++; - } - if (cflag & PARENB) { + if (cflag & PARENB) dafo |= SAB82532_DAFO_PARE; - bits++; - } if (cflag & PARODD) { dafo |= SAB82532_DAFO_PAR_ODD; @@ -776,7 +772,7 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla /* port->lock is not held. */ static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_sunsab_port *up = container_of(port, struct uart_sunsab_port, port); diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 84d545e5a8c7..9ea7e567540d 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -897,7 +897,7 @@ sunsu_change_speed(struct uart_port *port, unsigned int cflag, static void sunsu_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud, quot; @@ -1217,13 +1217,13 @@ static int sunsu_kbd_ms_init(struct uart_sunsu_port *up) serio->id.type = SERIO_RS232; if (up->su_type == SU_PORT_KBD) { serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "sukbd", sizeof(serio->name)); + strscpy(serio->name, "sukbd", sizeof(serio->name)); } else { serio->id.proto = SERIO_SUN; serio->id.extra = 1; - strlcpy(serio->name, "sums", sizeof(serio->name)); + strscpy(serio->name, "sums", sizeof(serio->name)); } - strlcpy(serio->phys, + strscpy(serio->phys, (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), sizeof(serio->phys)); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index c14275d83b0b..87425290687d 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -938,7 +938,7 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, /* The port lock is not held. */ static void sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_sunzilog_port *up = container_of(port, struct uart_sunzilog_port, port); @@ -1307,13 +1307,13 @@ static void sunzilog_register_serio(struct uart_sunzilog_port *up) serio->id.type = SERIO_RS232; if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "zskbd", sizeof(serio->name)); + strscpy(serio->name, "zskbd", sizeof(serio->name)); } else { serio->id.proto = SERIO_SUN; serio->id.extra = 1; - strlcpy(serio->name, "zsms", sizeof(serio->name)); + strscpy(serio->name, "zsms", sizeof(serio->name)); } - strlcpy(serio->phys, + strscpy(serio->phys, ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? "zs/serio0" : "zs/serio1"), sizeof(serio->phys)); diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c index 889b701ba7c6..23500b342da7 100644 --- a/drivers/tty/serial/tegra-tcu.c +++ b/drivers/tty/serial/tegra-tcu.c @@ -126,7 +126,7 @@ static void tegra_tcu_uart_shutdown(struct uart_port *port) static void tegra_tcu_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + const struct ktermios *old) { } diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index 08941eabe7b1..bb19ed012def 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -275,8 +275,8 @@ static int get_bindex(int baud) } static void timbuart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { unsigned int baud; short bindex; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 880e2afbb97b..eca41ac5477c 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -314,8 +314,9 @@ static void ulite_shutdown(struct uart_port *port) clk_disable(pdata->clk); } -static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +static void ulite_set_termios(struct uart_port *port, + struct ktermios *termios, + const struct ktermios *old) { unsigned long flags; struct uartlite_data *pdata = port->private_data; diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 3cc9ef08455c..82cf14dd3d43 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -843,7 +843,8 @@ static void qe_uart_shutdown(struct uart_port *port) * Set the serial port parameters. */ static void qe_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { struct uart_qe_port *qe_port = container_of(port, struct uart_qe_port, port); @@ -853,13 +854,6 @@ static void qe_uart_set_termios(struct uart_port *port, u16 upsmr = ioread16be(&uccp->upsmr); struct ucc_uart_pram __iomem *uccup = qe_port->uccup; u16 supsmr = ioread16be(&uccup->supsmr); - u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ /* byte size */ upsmr &= UCC_UART_UPSMR_CL_MASK; @@ -869,22 +863,18 @@ static void qe_uart_set_termios(struct uart_port *port, case CS5: upsmr |= UCC_UART_UPSMR_CL_5; supsmr |= UCC_UART_SUPSMR_CL_5; - char_length += 5; break; case CS6: upsmr |= UCC_UART_UPSMR_CL_6; supsmr |= UCC_UART_SUPSMR_CL_6; - char_length += 6; break; case CS7: upsmr |= UCC_UART_UPSMR_CL_7; supsmr |= UCC_UART_SUPSMR_CL_7; - char_length += 7; break; default: /* case CS8 */ upsmr |= UCC_UART_UPSMR_CL_8; supsmr |= UCC_UART_SUPSMR_CL_8; - char_length += 8; break; } @@ -892,13 +882,11 @@ static void qe_uart_set_termios(struct uart_port *port, if (termios->c_cflag & CSTOPB) { upsmr |= UCC_UART_UPSMR_SL; supsmr |= UCC_UART_SUPSMR_SL; - char_length++; /* + SL */ } if (termios->c_cflag & PARENB) { upsmr |= UCC_UART_UPSMR_PEN; supsmr |= UCC_UART_SUPSMR_PEN; - char_length++; /* + PEN */ if (!(termios->c_cflag & PARODD)) { upsmr &= ~(UCC_UART_UPSMR_RPM_MASK | @@ -953,7 +941,7 @@ static void qe_uart_set_termios(struct uart_port *port, iowrite16be(upsmr, &uccp->upsmr); if (soft_uart) { iowrite16be(supsmr, &uccup->supsmr); - iowrite8(char_length, &uccup->rx_length); + iowrite8(tty_get_frame_size(termios->c_cflag), &uccup->rx_length); /* Soft-UART requires a 1X multiplier for TX */ qe_setbrg(qe_port->us_info.rx_clock, baud, 16); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 6f08136ce78a..10fbdb09965f 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -187,6 +187,13 @@ static void handle_rx(struct uart_port *port) tty_flip_buffer_push(tport); } +static unsigned int vt8500_tx_empty(struct uart_port *port) +{ + unsigned int idx = vt8500_read(port, VT8500_URFIDX) & 0x1f; + + return idx < 16 ? TIOCSER_TEMT : 0; +} + static void handle_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; @@ -201,7 +208,7 @@ static void handle_tx(struct uart_port *port) return; } - while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { + while (vt8500_tx_empty(port)) { if (uart_circ_empty(xmit)) break; @@ -260,12 +267,6 @@ static irqreturn_t vt8500_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static unsigned int vt8500_tx_empty(struct uart_port *port) -{ - return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? - TIOCSER_TEMT : 0; -} - static unsigned int vt8500_get_mctrl(struct uart_port *port) { unsigned int usr; @@ -355,7 +356,7 @@ static void vt8500_shutdown(struct uart_port *port) static void vt8500_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct vt8500_port *vt8500_port = container_of(port, struct vt8500_port, uart); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 9e01fe6c0ab8..2eff7cff57c4 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -2,7 +2,7 @@ /* * Cadence UART driver (found in Xilinx Zynq) * - * 2011 - 2014 (C) Xilinx Inc. + * Copyright (c) 2011 - 2014 Xilinx, Inc. * * This driver has originally been pushed by Xilinx using a Zynq-branding. This * still shows in the naming of this file, the kconfig symbols and some symbols @@ -361,6 +361,8 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id) isrstatus &= ~CDNS_UART_IXR_TXEMPTY; } + isrstatus &= port->read_status_mask; + isrstatus &= ~port->ignore_status_mask; /* * Skip RX processing if RX is disabled as RXEMPTY will never be set * as read bytes will not be removed from the FIFO. @@ -675,7 +677,8 @@ static void cdns_uart_break_ctl(struct uart_port *port, int ctl) * @old: Values of the previously saved termios structure */ static void cdns_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { u32 cval = 0; unsigned int baud, minbaud, maxbaud; @@ -1130,8 +1133,35 @@ static struct uart_driver cdns_uart_uart_driver; */ static void cdns_uart_console_putchar(struct uart_port *port, unsigned char ch) { - while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL) + unsigned int ctrl_reg; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(1000); + while (1) { + ctrl_reg = readl(port->membase + CDNS_UART_CR); + if (!(ctrl_reg & CDNS_UART_CR_TX_DIS)) + break; + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, + "timeout waiting for Enable\n"); + return; + } + cpu_relax(); + } + + timeout = jiffies + msecs_to_jiffies(1000); + while (1) { + ctrl_reg = readl(port->membase + CDNS_UART_SR); + + if (!(ctrl_reg & CDNS_UART_SR_TXFULL)) + break; + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, + "timeout waiting for TX fifo\n"); + return; + } cpu_relax(); + } writel(ch, port->membase + CDNS_UART_FIFO); } @@ -1329,12 +1359,20 @@ static int cdns_uart_resume(struct device *device) unsigned long flags; u32 ctrl_reg; int may_wake; + int ret; may_wake = device_may_wakeup(device); if (console_suspend_enabled && uart_console(port) && !may_wake) { - clk_enable(cdns_uart->pclk); - clk_enable(cdns_uart->uartclk); + ret = clk_enable(cdns_uart->pclk); + if (ret) + return ret; + + ret = clk_enable(cdns_uart->uartclk); + if (ret) { + clk_disable(cdns_uart->pclk); + return ret; + } spin_lock_irqsave(&port->lock, flags); @@ -1383,9 +1421,17 @@ static int __maybe_unused cdns_runtime_resume(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); struct cdns_uart *cdns_uart = port->private_data; + int ret; - clk_enable(cdns_uart->pclk); - clk_enable(cdns_uart->uartclk); + ret = clk_enable(cdns_uart->pclk); + if (ret) + return ret; + + ret = clk_enable(cdns_uart->uartclk); + if (ret) { + clk_disable(cdns_uart->pclk); + return ret; + } return 0; }; @@ -1551,6 +1597,8 @@ static int cdns_uart_probe(struct platform_device *pdev) port->dev = &pdev->dev; port->uartclk = clk_get_rate(cdns_uart_data->uartclk); port->private_data = cdns_uart_data; + port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG | + CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT; cdns_uart_data->port = port; platform_set_drvdata(pdev, port); diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index 5bc58591665a..688db7d8b748 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -846,7 +846,7 @@ static void zs_reset(struct zs_port *zport) } static void zs_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct zs_port *zport = to_zport(uport); struct zs_scc *scc = zport->scc; diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 9bc2a9265277..25e9befdda3a 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -91,7 +91,6 @@ static char *driver_name = "SyncLink GT"; static char *slgt_driver_name = "synclink_gt"; static char *tty_dev_prefix = "ttySLG"; MODULE_LICENSE("GPL"); -#define MGSL_MAGIC 0x5401 #define MAX_DEVICES 32 static const struct pci_device_id pci_table[] = { @@ -215,8 +214,6 @@ struct slgt_info { struct slgt_info *next_device; /* device list link */ - int magic; - char device_name[25]; struct pci_dev *pdev; @@ -554,10 +551,6 @@ static inline int sanity_check(struct slgt_info *info, char *devname, const char printk("null struct slgt_info for (%s) in %s\n", devname, name); return 1; } - if (info->magic != MGSL_MAGIC) { - printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); - return 1; - } #else if (!info) return 1; @@ -707,7 +700,8 @@ static void hangup(struct tty_struct *tty) wake_up_interruptible(&info->port.open_wait); } -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) +static void set_termios(struct tty_struct *tty, + const struct ktermios *old_termios) { struct slgt_info *info = tty->driver_data; unsigned long flags; @@ -3498,7 +3492,6 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev } else { tty_port_init(&info->port); info->port.ops = &slgt_port_ops; - info->magic = MGSL_MAGIC; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; info->base_clock = 14745600; diff --git a/drivers/tty/tty.h b/drivers/tty/tty.h index f310a8274df1..1c08c9b67b16 100644 --- a/drivers/tty/tty.h +++ b/drivers/tty/tty.h @@ -73,7 +73,7 @@ void tty_buffer_set_lock_subclass(struct tty_port *port); bool tty_buffer_restart_work(struct tty_port *port); bool tty_buffer_cancel_work(struct tty_port *port); void tty_buffer_flush_work(struct tty_port *port); -speed_t tty_termios_input_baud_rate(struct ktermios *termios); +speed_t tty_termios_input_baud_rate(const struct ktermios *termios); void tty_ldisc_hangup(struct tty_struct *tty, bool reset); int tty_ldisc_reinit(struct tty_struct *tty, int disc); long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index 3cd99ed7c710..f9b49939c27b 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -49,13 +49,13 @@ static int n_baud_table = ARRAY_SIZE(baud_table); * * Convert termios baud rate data into a speed. This should be called * with the termios lock held if this termios is a terminal termios - * structure. May change the termios data. Device drivers can call this - * function but should use ->c_[io]speed directly as they are updated. + * structure. Device drivers can call this function but should use + * ->c_[io]speed directly as they are updated. * * Locking: none */ -speed_t tty_termios_baud_rate(struct ktermios *termios) +speed_t tty_termios_baud_rate(const struct ktermios *termios) { unsigned int cbaud; @@ -67,11 +67,7 @@ speed_t tty_termios_baud_rate(struct ktermios *termios) if (cbaud & CBAUDEX) { cbaud &= ~CBAUDEX; - - if (cbaud < 1 || cbaud + 15 > n_baud_table) - termios->c_cflag &= ~CBAUDEX; - else - cbaud += 15; + cbaud += 15; } return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; } @@ -83,30 +79,26 @@ EXPORT_SYMBOL(tty_termios_baud_rate); * * Convert termios baud rate data into a speed. This should be called * with the termios lock held if this termios is a terminal termios - * structure. May change the termios data. Device drivers can call this - * function but should use ->c_[io]speed directly as they are updated. + * structure. Device drivers can call this function but should use + * ->c_[io]speed directly as they are updated. * * Locking: none */ -speed_t tty_termios_input_baud_rate(struct ktermios *termios) +speed_t tty_termios_input_baud_rate(const struct ktermios *termios) { unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD; if (cbaud == B0) return tty_termios_baud_rate(termios); - /* Magic token for arbitrary speed via c_ispeed*/ + /* Magic token for arbitrary speed via c_ispeed */ if (cbaud == BOTHER) return termios->c_ispeed; if (cbaud & CBAUDEX) { cbaud &= ~CBAUDEX; - - if (cbaud < 1 || cbaud + 15 > n_baud_table) - termios->c_cflag &= ~(CBAUDEX << IBSHIFT); - else - cbaud += 15; + cbaud += 15; } return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 82a8855981f7..de06c3c2ff70 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -99,8 +99,8 @@ #include <linux/serial.h> #include <linux/ratelimit.h> #include <linux/compat.h> - #include <linux/uaccess.h> +#include <linux/termios_internal.h> #include <linux/kbd_kern.h> #include <linux/vt_kern.h> @@ -170,7 +170,6 @@ static void free_tty_struct(struct tty_struct *tty) tty_ldisc_deinit(tty); put_device(tty->dev); kvfree(tty->write_buf); - tty->magic = 0xDEADDEAD; kfree(tty); } @@ -265,11 +264,6 @@ static int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, imajor(inode), iminor(inode), routine); return 1; } - if (tty->magic != TTY_MAGIC) { - pr_warn("(%d:%d): %s: bad magic number\n", - imajor(inode), iminor(inode), routine); - return 1; - } #endif return 0; } @@ -1533,7 +1527,6 @@ static void release_one_tty(struct work_struct *work) if (tty->ops->cleanup) tty->ops->cleanup(tty); - tty->magic = 0; tty_driver_kref_put(driver); module_put(owner); @@ -3093,7 +3086,6 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx) return NULL; kref_init(&tty->kref); - tty->magic = TTY_MAGIC; if (tty_ldisc_init(tty)) { kfree(tty); return NULL; @@ -3329,7 +3321,6 @@ struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner, return ERR_PTR(-ENOMEM); kref_init(&driver->kref); - driver->magic = TTY_DRIVER_MAGIC; driver->num = lines; driver->owner = owner; driver->flags = flags; diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 2a76b330e108..ce511557b98b 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -21,6 +21,7 @@ #include <linux/bitops.h> #include <linux/mutex.h> #include <linux/compat.h> +#include <linux/termios_internal.h> #include "tty.h" #include <asm/io.h> @@ -219,7 +220,7 @@ EXPORT_SYMBOL(tty_wait_until_sent); * Termios Helper Methods */ -static void unset_locked_termios(struct tty_struct *tty, struct ktermios *old) +static void unset_locked_termios(struct tty_struct *tty, const struct ktermios *old) { struct ktermios *termios = &tty->termios; struct ktermios *locked = &tty->termios_locked; @@ -249,7 +250,7 @@ static void unset_locked_termios(struct tty_struct *tty, struct ktermios *old) * in some cases where only minimal reconfiguration is supported */ -void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old) +void tty_termios_copy_hw(struct ktermios *new, const struct ktermios *old) { /* The bits a dumb device handles in software. Smart devices need to always provide a set_termios method */ @@ -374,6 +375,80 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) } EXPORT_SYMBOL_GPL(tty_set_termios); + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +__weak int user_termio_to_kernel_termios(struct ktermios *termios, + struct termio __user *termio) +{ + struct termio v; + + if (copy_from_user(&v, termio, sizeof(struct termio))) + return -EFAULT; + + termios->c_iflag = (0xffff0000 & termios->c_iflag) | v.c_iflag; + termios->c_oflag = (0xffff0000 & termios->c_oflag) | v.c_oflag; + termios->c_cflag = (0xffff0000 & termios->c_cflag) | v.c_cflag; + termios->c_lflag = (0xffff0000 & termios->c_lflag) | v.c_lflag; + termios->c_line = (0xffff0000 & termios->c_lflag) | v.c_line; + memcpy(termios->c_cc, v.c_cc, NCC); + return 0; +} + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +__weak int kernel_termios_to_user_termio(struct termio __user *termio, + struct ktermios *termios) +{ + struct termio v; + memset(&v, 0, sizeof(struct termio)); + v.c_iflag = termios->c_iflag; + v.c_oflag = termios->c_oflag; + v.c_cflag = termios->c_cflag; + v.c_lflag = termios->c_lflag; + v.c_line = termios->c_line; + memcpy(v.c_cc, termios->c_cc, NCC); + return copy_to_user(termio, &v, sizeof(struct termio)); +} + +#ifdef TCGETS2 +__weak int user_termios_to_kernel_termios(struct ktermios *k, + struct termios2 __user *u) +{ + return copy_from_user(k, u, sizeof(struct termios2)); +} +__weak int kernel_termios_to_user_termios(struct termios2 __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios2)); +} +__weak int user_termios_to_kernel_termios_1(struct ktermios *k, + struct termios __user *u) +{ + return copy_from_user(k, u, sizeof(struct termios)); +} +__weak int kernel_termios_to_user_termios_1(struct termios __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios)); +} + +#else + +__weak int user_termios_to_kernel_termios(struct ktermios *k, + struct termios __user *u) +{ + return copy_from_user(k, u, sizeof(struct termios)); +} +__weak int kernel_termios_to_user_termios(struct termios __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios)); +} +#endif /* TCGETS2 */ + /** * set_termios - set termios values for a tty * @tty: terminal device diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c index 393518a24cfe..784e46a0a3b1 100644 --- a/drivers/tty/tty_mutex.c +++ b/drivers/tty/tty_mutex.c @@ -14,8 +14,6 @@ void tty_lock(struct tty_struct *tty) { - if (WARN(tty->magic != TTY_MAGIC, "L Bad %p\n", tty)) - return; tty_kref_get(tty); mutex_lock(&tty->legacy_mutex); } @@ -25,8 +23,6 @@ int tty_lock_interruptible(struct tty_struct *tty) { int ret; - if (WARN(tty->magic != TTY_MAGIC, "L Bad %p\n", tty)) - return -EIO; tty_kref_get(tty); ret = mutex_lock_interruptible(&tty->legacy_mutex); if (ret) @@ -36,8 +32,6 @@ int tty_lock_interruptible(struct tty_struct *tty) void tty_unlock(struct tty_struct *tty) { - if (WARN(tty->magic != TTY_MAGIC, "U Bad %p\n", tty)) - return; mutex_unlock(&tty->legacy_mutex); tty_kref_put(tty); } diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c index e11383ae1e7e..34ba6e54789a 100644 --- a/drivers/tty/vcc.c +++ b/drivers/tty/vcc.c @@ -11,6 +11,7 @@ #include <linux/sysfs.h> #include <linux/tty.h> #include <linux/tty_flip.h> +#include <linux/termios_internal.h> #include <asm/vio.h> #include <asm/ldc.h> diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 0b669c82ddc9..981d2bfcf9a5 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -154,10 +154,10 @@ static void console_callback(struct work_struct *ignored); static void con_driver_unregister_callback(struct work_struct *ignored); static void blank_screen_t(struct timer_list *unused); static void set_palette(struct vc_data *vc); +static void unblank_screen(void); #define vt_get_kmsg_redirect() vt_kmsg_redirect(-1) -static int printable; /* Is console ready for printing? */ int default_utf8 = true; module_param(default_utf8, int, S_IRUGO | S_IWUSR); int global_cursor_default = -1; @@ -3084,9 +3084,9 @@ static void vt_console_print(struct console *co, const char *b, unsigned count) ushort start_x, cnt; int kmsg_console; - /* console busy or not yet initialized */ - if (!printable) - return; + WARN_CONSOLE_UNLOCKED(); + + /* this protects against concurrent oops only */ if (!spin_trylock(&printing_lock)) return; @@ -3537,7 +3537,6 @@ static int __init con_init(void) pr_info("Console: %s %s %dx%d\n", vc->vc_can_do_color ? "colour" : "mono", display_desc, vc->vc_cols, vc->vc_rows); - printable = 1; console_unlock(); @@ -4452,7 +4451,7 @@ EXPORT_SYMBOL(do_unblank_screen); * call it with 1 as an argument and so force a mode restore... that may kill * X or at least garbage the screen but would also make the Oops visible... */ -void unblank_screen(void) +static void unblank_screen(void) { do_unblank_screen(0); } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index cc637c4599e1..36bf051b345b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -51,7 +51,7 @@ static DEFINE_IDR(acm_minors); static DEFINE_MUTEX(acm_minors_lock); static void acm_tty_set_termios(struct tty_struct *tty, - struct ktermios *termios_old); + const struct ktermios *termios_old); /* * acm_minors accessors @@ -1049,7 +1049,7 @@ static int acm_tty_ioctl(struct tty_struct *tty, } static void acm_tty_set_termios(struct tty_struct *tty, - struct ktermios *termios_old) + const struct ktermios *termios_old) { struct acm *acm = tty->driver_data; struct ktermios *termios = &tty->termios; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 39eaa7b97c40..9452291f1703 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -189,7 +189,7 @@ static void ark3116_port_remove(struct usb_serial_port *port) static void ark3116_set_termios(struct tty_struct *tty, struct usb_serial_port *port, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct ark3116_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 8107e4b5b03b..9331a562dac0 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -44,7 +44,8 @@ static void belkin_sa_close(struct usb_serial_port *port); static void belkin_sa_read_int_callback(struct urb *urb); static void belkin_sa_process_read_urb(struct urb *urb); static void belkin_sa_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios * old); + struct usb_serial_port *port, + const struct ktermios *old_termios); static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state); static int belkin_sa_tiocmget(struct tty_struct *tty); static int belkin_sa_tiocmset(struct tty_struct *tty, @@ -273,7 +274,8 @@ static void belkin_sa_process_read_urb(struct urb *urb) } static void belkin_sa_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct belkin_sa_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index af01a462cc43..6e1b87e67304 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -106,7 +106,7 @@ struct ch341_private { static void ch341_set_termios(struct tty_struct *tty, struct usb_serial_port *port, - struct ktermios *old_termios); + const struct ktermios *old_termios); static int ch341_control_out(struct usb_device *dev, u8 request, u16 value, u16 index) @@ -482,7 +482,8 @@ err_kill_interrupt_urb: * tty->termios contains the new setting to be used. */ static void ch341_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned baud_rate; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index a34957c4b64c..3bcec419f463 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -31,9 +31,9 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *); static void cp210x_close(struct usb_serial_port *); static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, - struct ktermios *); + const struct ktermios *); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, - struct ktermios*); + const struct ktermios *); static bool cp210x_tx_empty(struct usb_serial_port *port); static int cp210x_tiocmget(struct tty_struct *); static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int); @@ -1040,7 +1040,8 @@ static speed_t cp210x_get_actual_rate(speed_t baud) * otherwise. */ static void cp210x_change_speed(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct cp210x_serial_private *priv = usb_get_serial_data(serial); @@ -1122,7 +1123,8 @@ static bool cp210x_termios_change(const struct ktermios *a, const struct ktermio } static void cp210x_set_flow_control(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); @@ -1232,7 +1234,8 @@ out_unlock: } static void cp210x_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); u16 bits; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 5fbcc155e8f5..1e0c028c5ec9 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -125,7 +125,8 @@ static void cypress_send(struct usb_serial_port *port); static unsigned int cypress_write_room(struct tty_struct *tty); static void cypress_earthmate_init_termios(struct tty_struct *tty); static void cypress_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); + struct usb_serial_port *port, + const struct ktermios *old_termios); static int cypress_tiocmget(struct tty_struct *tty); static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); @@ -859,7 +860,8 @@ static void cypress_earthmate_init_termios(struct tty_struct *tty) } static void cypress_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct cypress_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index af65eb863d70..45d688e9b93f 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -215,7 +215,8 @@ static int digi_transmit_idle(struct usb_serial_port *port, static void digi_rx_throttle(struct tty_struct *tty); static void digi_rx_unthrottle(struct tty_struct *tty); static void digi_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios); + struct usb_serial_port *port, + const struct ktermios *old_termios); static void digi_break_ctl(struct tty_struct *tty, int break_state); static int digi_tiocmget(struct tty_struct *tty); static int digi_tiocmset(struct tty_struct *tty, unsigned int set, @@ -649,7 +650,8 @@ static void digi_rx_unthrottle(struct tty_struct *tty) static void digi_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct digi_port *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index d9f20256a6a8..2dd58cd9f0cc 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -603,7 +603,8 @@ static int f81232_port_disable(struct usb_serial_port *port) } static void f81232_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct f81232_private *priv = usb_get_serial_port_data(port); u8 new_lcr = 0; diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index d789c1ec87b3..ddfcd72eb0ae 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -944,8 +944,8 @@ static int f81534_calc_num_ports(struct usb_serial *serial, } static void f81534_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { u8 new_lcr = 0; int status; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 52d59be92034..0a1da579ead5 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1089,7 +1089,8 @@ static void ftdi_process_read_urb(struct urb *urb); static int ftdi_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size); static void ftdi_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); + struct usb_serial_port *port, + const struct ktermios *old_termios); static int ftdi_tiocmget(struct tty_struct *tty); static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); @@ -2640,7 +2641,8 @@ static bool ftdi_tx_empty(struct usb_serial_port *port) * WARNING: set_termios calls this with old_termios in kernel space */ static void ftdi_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_device *dev = port->serial->dev; struct device *ddev = &port->dev; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index ffa622539a25..3a4c0febf335 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -281,7 +281,7 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor); static void change_port_settings(struct tty_struct *tty, struct edgeport_port *edge_port, - struct ktermios *old_termios); + const struct ktermios *old_termios); static int send_cmd_write_uart_register(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue); static int write_cmd_usb(struct edgeport_port *edge_port, @@ -1441,7 +1441,8 @@ static void edge_unthrottle(struct tty_struct *tty) * the termios structure *****************************************************************************/ static void edge_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); @@ -2325,7 +2326,7 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, *****************************************************************************/ static void change_port_settings(struct tty_struct *tty, - struct edgeport_port *edge_port, struct ktermios *old_termios) + struct edgeport_port *edge_port, const struct ktermios *old_termios) { struct device *dev = &edge_port->port->dev; struct edgeport_serial *edge_serial = diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index feba2a8d1233..bc3c24ea42c1 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -221,7 +221,8 @@ static void stop_read(struct edgeport_port *edge_port); static int restart_read(struct edgeport_port *edge_port); static void edge_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios); + struct usb_serial_port *port, + const struct ktermios *old_termios); static void edge_send(struct usb_serial_port *port, struct tty_struct *tty); static int do_download_mode(struct edgeport_serial *serial, @@ -2210,7 +2211,7 @@ static int restart_read(struct edgeport_port *edge_port) } static void change_port_settings(struct tty_struct *tty, - struct edgeport_port *edge_port, struct ktermios *old_termios) + struct edgeport_port *edge_port, const struct ktermios *old_termios) { struct device *dev = &edge_port->port->dev; struct ump_uart_config *config; @@ -2351,7 +2352,8 @@ static void change_port_settings(struct tty_struct *tty, } static void edge_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 7b44dbea95cd..82f108134e6f 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -51,7 +51,8 @@ static unsigned int ir_write_room(struct tty_struct *tty); static void ir_write_bulk_callback(struct urb *urb); static void ir_process_read_urb(struct urb *urb); static void ir_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios); + struct usb_serial_port *port, + const struct ktermios *old_termios); /* Not that this lot means you can only have one per system */ static u8 ir_baud; @@ -376,7 +377,8 @@ static void ir_process_read_urb(struct urb *urb) } static void ir_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_device *udev = port->serial->dev; unsigned char *transfer_buffer; diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 0be3b5e1eaf3..77cba71bcccb 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -879,7 +879,8 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, } static void iuu_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { const u32 supported_mask = CMSPAR|PARENB|PARODD; struct iuu_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 1cfcd805f286..2966e0c4941e 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -616,7 +616,8 @@ static void keyspan_break_ctl(struct tty_struct *tty, int break_state) static void keyspan_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { int baud_rate, device_port; struct keyspan_port_private *p_priv; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 3e7628becdcd..6fd15cd9e1eb 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -321,7 +321,8 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state) } static void keyspan_pda_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; speed_t speed; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index edcc57bd9b5e..394b3189e003 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -56,7 +56,8 @@ static void klsi_105_port_remove(struct usb_serial_port *port); static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); static void klsi_105_close(struct usb_serial_port *port); static void klsi_105_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); + struct usb_serial_port *port, + const struct ktermios *old_termios); static int klsi_105_tiocmget(struct tty_struct *tty); static void klsi_105_process_read_urb(struct urb *urb); static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, @@ -366,7 +367,7 @@ static void klsi_105_process_read_urb(struct urb *urb) static void klsi_105_set_termios(struct tty_struct *tty, struct usb_serial_port *port, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct klsi_105_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 4ed8b8b0a361..5e775f68fcb8 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -62,7 +62,8 @@ static int kobil_tiocmset(struct tty_struct *tty, static void kobil_read_int_callback(struct urb *urb); static void kobil_write_int_callback(struct urb *urb); static void kobil_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); + struct usb_serial_port *port, + const struct ktermios *old); static void kobil_init_termios(struct tty_struct *tty); static const struct usb_device_id id_table[] = { @@ -474,7 +475,8 @@ static int kobil_tiocmset(struct tty_struct *tty, } static void kobil_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old) + struct usb_serial_port *port, + const struct ktermios *old) { struct kobil_private *priv; int result; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index ecd5b921e374..d3852feb81a4 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -45,7 +45,8 @@ static void mct_u232_close(struct usb_serial_port *port); static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); static void mct_u232_read_int_callback(struct urb *urb); static void mct_u232_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); + struct usb_serial_port *port, + const struct ktermios *old_termios); static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); static int mct_u232_tiocmget(struct tty_struct *tty); static int mct_u232_tiocmset(struct tty_struct *tty, @@ -593,7 +594,7 @@ exit: static void mct_u232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 23ccbba716c7..1d1f85fabc28 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1356,7 +1356,7 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, */ static void change_port_settings(struct tty_struct *tty, struct moschip_port *mos7720_port, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct usb_serial_port *port; struct usb_serial *serial; @@ -1494,7 +1494,8 @@ static void change_port_settings(struct tty_struct *tty, * termios structure. */ static void mos7720_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { int status; struct moschip_port *mos7720_port; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 925067a7978d..6b12bb4648b8 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1188,7 +1188,8 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, *****************************************************************************/ static void mos7840_change_port_settings(struct tty_struct *tty, - struct moschip_port *mos7840_port, struct ktermios *old_termios) + struct moschip_port *mos7840_port, + const struct ktermios *old_termios) { struct usb_serial_port *port = mos7840_port->port; int baud; @@ -1330,7 +1331,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty, static void mos7840_set_termios(struct tty_struct *tty, struct usb_serial_port *port, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct moschip_port *mos7840_port = usb_get_serial_port_data(port); int status; diff --git a/drivers/usb/serial/mxuport.c b/drivers/usb/serial/mxuport.c index eb45a9b0005c..faa0eedfe245 100644 --- a/drivers/usb/serial/mxuport.c +++ b/drivers/usb/serial/mxuport.c @@ -760,7 +760,7 @@ static int mxuport_tiocmget(struct tty_struct *tty) } static int mxuport_set_termios_flow(struct tty_struct *tty, - struct ktermios *old_termios, + const struct ktermios *old_termios, struct usb_serial_port *port, struct usb_serial *serial) { @@ -834,7 +834,7 @@ out: static void mxuport_set_termios(struct tty_struct *tty, struct usb_serial_port *port, - struct ktermios *old_termios) + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; u8 *buf; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index a5caedbe72e2..6365cfe5402c 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -119,7 +119,8 @@ struct oti6858_control_pkt { static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port); static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); + struct usb_serial_port *port, + const struct ktermios *old_termios); static void oti6858_init_termios(struct tty_struct *tty); static void oti6858_read_int_callback(struct urb *urb); static void oti6858_read_bulk_callback(struct urb *urb); @@ -395,7 +396,8 @@ static void oti6858_init_termios(struct tty_struct *tty) } static void oti6858_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 40b1ab3d284d..8949c1891164 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -789,7 +789,8 @@ static bool pl2303_enable_xonxoff(struct tty_struct *tty, const struct pl2303_ty } static void pl2303_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct pl2303_serial_private *spriv = usb_get_serial_data(serial); diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 36b1e064e51f..6fca40ace83a 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -261,8 +261,8 @@ static int qt2_calc_num_ports(struct usb_serial *serial, } static void qt2_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_device *dev = port->serial->dev; struct qt2_port_private *port_priv; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 7039dc918827..09a972a838ee 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -283,7 +283,8 @@ static void spcp8x5_init_termios(struct tty_struct *tty) } static void spcp8x5_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 181e302136a5..1e1888b66305 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -214,8 +214,8 @@ out: kfree(data); static void ssu100_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_device *dev = port->serial->dev; struct ktermios *termios = &tty->termios; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 18c0bd853392..b99f78224846 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -314,7 +314,8 @@ static bool ti_tx_empty(struct usb_serial_port *port); static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); static void ti_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios); + struct usb_serial_port *port, + const struct ktermios *old_termios); static int ti_tiocmget(struct tty_struct *tty); static int ti_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); @@ -892,7 +893,8 @@ static void ti_unthrottle(struct tty_struct *tty) } static void ti_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct ti_port *tport = usb_get_serial_port_data(port); struct ti_uart_config *config; diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c index 63d4a784ae45..c47439bd90fa 100644 --- a/drivers/usb/serial/upd78f0730.c +++ b/drivers/usb/serial/upd78f0730.c @@ -296,8 +296,8 @@ static speed_t upd78f0730_get_baud_rate(struct tty_struct *tty) } static void upd78f0730_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct device *dev = &port->dev; struct upd78f0730_line_control request; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e35bea2235c1..164521ee10c6 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -519,7 +519,8 @@ static int serial_ioctl(struct tty_struct *tty, return retval; } -static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) +static void serial_set_termios(struct tty_struct *tty, + const struct ktermios *old) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 332fb92ae575..7f82d40753ee 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -82,7 +82,8 @@ static void whiteheat_close(struct usb_serial_port *port); static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *ss); static void whiteheat_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); + struct usb_serial_port *port, + const struct ktermios *old_termios); static int whiteheat_tiocmget(struct tty_struct *tty); static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); @@ -442,7 +443,8 @@ static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *s static void whiteheat_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { firm_setup_port(tty); } diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c index 6853cd56d8dc..f3811e060a44 100644 --- a/drivers/usb/serial/xr_serial.c +++ b/drivers/usb/serial/xr_serial.c @@ -104,7 +104,8 @@ static int xr21v141x_uart_enable(struct usb_serial_port *port); static int xr21v141x_uart_disable(struct usb_serial_port *port); static int xr21v141x_fifo_reset(struct usb_serial_port *port); static void xr21v141x_set_line_settings(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios); + struct usb_serial_port *port, + const struct ktermios *old_termios); struct xr_type { int reg_width; @@ -133,8 +134,8 @@ struct xr_type { int (*disable)(struct usb_serial_port *port); int (*fifo_reset)(struct usb_serial_port *port); void (*set_line_settings)(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios); + struct usb_serial_port *port, + const struct ktermios *old_termios); }; enum xr_type_id { @@ -622,8 +623,8 @@ static int xr21v141x_set_baudrate(struct tty_struct *tty, struct usb_serial_port } static void xr_set_flow_mode(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct xr_data *data = usb_get_serial_port_data(port); const struct xr_type *type = data->type; @@ -674,7 +675,8 @@ static void xr_set_flow_mode(struct tty_struct *tty, } static void xr21v141x_set_line_settings(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct ktermios *termios = &tty->termios; u8 bits = 0; @@ -732,7 +734,8 @@ static void xr21v141x_set_line_settings(struct tty_struct *tty, } static void xr_cdc_set_line_coding(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct xr_data *data = usb_get_serial_port_data(port); struct usb_host_interface *alt = port->serial->interface->cur_altsetting; @@ -809,7 +812,8 @@ static void xr_cdc_set_line_coding(struct tty_struct *tty, } static void xr_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct xr_data *data = usb_get_serial_port_data(port); diff --git a/include/asm-generic/termios-base.h b/include/asm-generic/termios-base.h deleted file mode 100644 index 59c5a3bd4a6e..000000000000 --- a/include/asm-generic/termios-base.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* termios.h: generic termios/termio user copying/translation - */ - -#ifndef _ASM_GENERIC_TERMIOS_BASE_H -#define _ASM_GENERIC_TERMIOS_BASE_H - -#include <linux/uaccess.h> - -#ifndef __ARCH_TERMIO_GETPUT - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -static inline int user_termio_to_kernel_termios(struct ktermios *termios, - struct termio __user *termio) -{ - unsigned short tmp; - - if (get_user(tmp, &termio->c_iflag) < 0) - goto fault; - termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp; - - if (get_user(tmp, &termio->c_oflag) < 0) - goto fault; - termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp; - - if (get_user(tmp, &termio->c_cflag) < 0) - goto fault; - termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp; - - if (get_user(tmp, &termio->c_lflag) < 0) - goto fault; - termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp; - - if (get_user(termios->c_line, &termio->c_line) < 0) - goto fault; - - if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0) - goto fault; - - return 0; - - fault: - return -EFAULT; -} - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -static inline int kernel_termios_to_user_termio(struct termio __user *termio, - struct ktermios *termios) -{ - if (put_user(termios->c_iflag, &termio->c_iflag) < 0 || - put_user(termios->c_oflag, &termio->c_oflag) < 0 || - put_user(termios->c_cflag, &termio->c_cflag) < 0 || - put_user(termios->c_lflag, &termio->c_lflag) < 0 || - put_user(termios->c_line, &termio->c_line) < 0 || - copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0) - return -EFAULT; - - return 0; -} - -#ifndef user_termios_to_kernel_termios -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#endif - -#ifndef kernel_termios_to_user_termios -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) -#endif - -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __ARCH_TERMIO_GETPUT */ - -#endif /* _ASM_GENERIC_TERMIOS_BASE_H */ diff --git a/include/asm-generic/termios.h b/include/asm-generic/termios.h deleted file mode 100644 index b1398d0d4a1d..000000000000 --- a/include/asm-generic/termios.h +++ /dev/null @@ -1,108 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_GENERIC_TERMIOS_H -#define _ASM_GENERIC_TERMIOS_H - - -#include <linux/uaccess.h> -#include <uapi/asm-generic/termios.h> - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -static inline int user_termio_to_kernel_termios(struct ktermios *termios, - const struct termio __user *termio) -{ - unsigned short tmp; - - if (get_user(tmp, &termio->c_iflag) < 0) - goto fault; - termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp; - - if (get_user(tmp, &termio->c_oflag) < 0) - goto fault; - termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp; - - if (get_user(tmp, &termio->c_cflag) < 0) - goto fault; - termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp; - - if (get_user(tmp, &termio->c_lflag) < 0) - goto fault; - termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp; - - if (get_user(termios->c_line, &termio->c_line) < 0) - goto fault; - - if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0) - goto fault; - - return 0; - - fault: - return -EFAULT; -} - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -static inline int kernel_termios_to_user_termio(struct termio __user *termio, - struct ktermios *termios) -{ - if (put_user(termios->c_iflag, &termio->c_iflag) < 0 || - put_user(termios->c_oflag, &termio->c_oflag) < 0 || - put_user(termios->c_cflag, &termio->c_cflag) < 0 || - put_user(termios->c_lflag, &termio->c_lflag) < 0 || - put_user(termios->c_line, &termio->c_line) < 0 || - copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0) - return -EFAULT; - - return 0; -} - -#ifdef TCGETS2 -static inline int user_termios_to_kernel_termios(struct ktermios *k, - struct termios2 __user *u) -{ - return copy_from_user(k, u, sizeof(struct termios2)); -} - -static inline int kernel_termios_to_user_termios(struct termios2 __user *u, - struct ktermios *k) -{ - return copy_to_user(u, k, sizeof(struct termios2)); -} - -static inline int user_termios_to_kernel_termios_1(struct ktermios *k, - struct termios __user *u) -{ - return copy_from_user(k, u, sizeof(struct termios)); -} - -static inline int kernel_termios_to_user_termios_1(struct termios __user *u, - struct ktermios *k) -{ - return copy_to_user(u, k, sizeof(struct termios)); -} -#else /* TCGETS2 */ -static inline int user_termios_to_kernel_termios(struct ktermios *k, - struct termios __user *u) -{ - return copy_from_user(k, u, sizeof(struct termios)); -} - -static inline int kernel_termios_to_user_termios(struct termios __user *u, - struct ktermios *k) -{ - return copy_to_user(u, k, sizeof(struct termios)); -} -#endif /* TCGETS2 */ - -#endif /* _ASM_GENERIC_TERMIOS_H */ diff --git a/include/linux/serdev.h b/include/linux/serdev.h index 3368c261ab62..66f624fc618c 100644 --- a/include/linux/serdev.h +++ b/include/linux/serdev.h @@ -7,6 +7,7 @@ #include <linux/types.h> #include <linux/device.h> +#include <linux/uaccess.h> #include <linux/termios.h> #include <linux/delay.h> diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 8c7b793aa4d7..19376bee9667 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -32,7 +32,7 @@ struct plat_serial8250_port { void (*serial_out)(struct uart_port *, int, int); void (*set_termios)(struct uart_port *, struct ktermios *new, - struct ktermios *old); + const struct ktermios *old); void (*set_ldisc)(struct uart_port *, struct ktermios *); unsigned int (*get_mctrl)(struct uart_port *); @@ -74,6 +74,7 @@ struct uart_8250_port; struct uart_8250_ops { int (*setup_irq)(struct uart_8250_port *); void (*release_irq)(struct uart_8250_port *); + void (*setup_timer)(struct uart_8250_port *); }; struct uart_8250_em485 { @@ -157,7 +158,7 @@ extern int early_serial8250_setup(struct earlycon_device *device, extern void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk); extern void serial8250_do_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old); + struct ktermios *termios, const struct ktermios *old); extern void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios); extern unsigned int serial8250_do_get_mctrl(struct uart_port *port); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 1eaea9fe44d8..d657f2a42a7b 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -387,7 +387,7 @@ struct uart_ops { void (*shutdown)(struct uart_port *); void (*flush_buffer)(struct uart_port *); void (*set_termios)(struct uart_port *, struct ktermios *new, - struct ktermios *old); + const struct ktermios *old); void (*set_ldisc)(struct uart_port *, struct ktermios *); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); @@ -422,7 +422,7 @@ struct uart_icount { __u32 buf_overrun; }; -typedef unsigned int __bitwise upf_t; +typedef u64 __bitwise upf_t; typedef unsigned int __bitwise upstat_t; struct uart_port { @@ -433,7 +433,7 @@ struct uart_port { void (*serial_out)(struct uart_port *, int, int); void (*set_termios)(struct uart_port *, struct ktermios *new, - struct ktermios *old); + const struct ktermios *old); void (*set_ldisc)(struct uart_port *, struct ktermios *); unsigned int (*get_mctrl)(struct uart_port *); @@ -513,23 +513,24 @@ struct uart_port { #define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ ) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ ) -#define UPF_NO_THRE_TEST ((__force upf_t) (1 << 19)) +#define UPF_NO_THRE_TEST ((__force upf_t) BIT_ULL(19)) /* Port has hardware-assisted h/w flow control */ -#define UPF_AUTO_CTS ((__force upf_t) (1 << 20)) -#define UPF_AUTO_RTS ((__force upf_t) (1 << 21)) +#define UPF_AUTO_CTS ((__force upf_t) BIT_ULL(20)) +#define UPF_AUTO_RTS ((__force upf_t) BIT_ULL(21)) #define UPF_HARD_FLOW ((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS)) /* Port has hardware-assisted s/w flow control */ -#define UPF_SOFT_FLOW ((__force upf_t) (1 << 22)) -#define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) -#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) -#define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) -#define UPF_BUG_THRE ((__force upf_t) (1 << 26)) +#define UPF_SOFT_FLOW ((__force upf_t) BIT_ULL(22)) +#define UPF_CONS_FLOW ((__force upf_t) BIT_ULL(23)) +#define UPF_SHARE_IRQ ((__force upf_t) BIT_ULL(24)) +#define UPF_EXAR_EFR ((__force upf_t) BIT_ULL(25)) +#define UPF_BUG_THRE ((__force upf_t) BIT_ULL(26)) /* The exact UART type is known and should not be probed. */ -#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) -#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) -#define UPF_FIXED_PORT ((__force upf_t) (1 << 29)) -#define UPF_DEAD ((__force upf_t) (1 << 30)) -#define UPF_IOREMAP ((__force upf_t) (1 << 31)) +#define UPF_FIXED_TYPE ((__force upf_t) BIT_ULL(27)) +#define UPF_BOOT_AUTOCONF ((__force upf_t) BIT_ULL(28)) +#define UPF_FIXED_PORT ((__force upf_t) BIT_ULL(29)) +#define UPF_DEAD ((__force upf_t) BIT_ULL(30)) +#define UPF_IOREMAP ((__force upf_t) BIT_ULL(31)) +#define UPF_FULL_PROBE ((__force upf_t) BIT_ULL(32)) #define __UPF_CHANGE_MASK 0x17fff #define UPF_CHANGE_MASK ((__force upf_t) __UPF_CHANGE_MASK) @@ -669,7 +670,7 @@ void uart_write_wakeup(struct uart_port *port); void uart_update_timeout(struct uart_port *port, unsigned int cflag, unsigned int baud); unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, - struct ktermios *old, unsigned int min, + const struct ktermios *old, unsigned int min, unsigned int max); unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud); @@ -950,5 +951,4 @@ static inline int uart_handle_break(struct uart_port *port) !((cflag) & CLOCAL)) int uart_get_rs485_mode(struct uart_port *port); -int uart_rs485_config(struct uart_port *port); #endif /* LINUX_SERIAL_CORE_H */ diff --git a/include/linux/termios_internal.h b/include/linux/termios_internal.h new file mode 100644 index 000000000000..d77f29e5e2b7 --- /dev/null +++ b/include/linux/termios_internal.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_TERMIOS_CONV_H +#define _LINUX_TERMIOS_CONV_H + +#include <linux/uaccess.h> +#include <asm/termios.h> + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^O werase=^W lnext=^V + eol2=\0 +*/ + +#ifdef VDSUSP +#define INIT_C_CC_VDSUSP_EXTRA [VDSUSP] = 'Y'-0x40, +#else +#define INIT_C_CC_VDSUSP_EXTRA +#endif + +#define INIT_C_CC { \ + [VINTR] = 'C'-0x40, \ + [VQUIT] = '\\'-0x40, \ + [VERASE] = '\177', \ + [VKILL] = 'U'-0x40, \ + [VEOF] = 'D'-0x40, \ + [VSTART] = 'Q'-0x40, \ + [VSTOP] = 'S'-0x40, \ + [VSUSP] = 'Z'-0x40, \ + [VREPRINT] = 'R'-0x40, \ + [VDISCARD] = 'O'-0x40, \ + [VWERASE] = 'W'-0x40, \ + [VLNEXT] = 'V'-0x40, \ + INIT_C_CC_VDSUSP_EXTRA \ + [VMIN] = 1 } + +int user_termio_to_kernel_termios(struct ktermios *, struct termio __user *); +int kernel_termios_to_user_termio(struct termio __user *, struct ktermios *); +#ifdef TCGETS2 +int user_termios_to_kernel_termios(struct ktermios *, struct termios2 __user *); +int kernel_termios_to_user_termios(struct termios2 __user *, struct ktermios *); +int user_termios_to_kernel_termios_1(struct ktermios *, struct termios __user *); +int kernel_termios_to_user_termios_1(struct termios __user *, struct ktermios *); +#else /* TCGETS2 */ +int user_termios_to_kernel_termios(struct ktermios *, struct termios __user *); +int kernel_termios_to_user_termios(struct termios __user *, struct ktermios *); +#endif /* TCGETS2 */ + +#endif /* _LINUX_TERMIOS_CONV_H */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 7b0a5d478ef6..730c3301d710 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -122,8 +122,6 @@ struct tty_operations; /** * struct tty_struct - state associated with a tty while open * - * @magic: magic value set early in @alloc_tty_struct to %TTY_MAGIC, for - * debugging purposes * @kref: reference counting by tty_kref_get() and tty_kref_put(), reaching zero * frees the structure * @dev: class device or %NULL (e.g. ptys, serdev) @@ -193,7 +191,6 @@ struct tty_operations; * &struct tty_port. */ struct tty_struct { - int magic; struct kref kref; struct device *dev; struct tty_driver *driver; @@ -260,9 +257,6 @@ struct tty_file_private { struct list_head list; }; -/* tty magic number */ -#define TTY_MAGIC 0x5401 - /** * DOC: TTY Struct Flags * @@ -434,7 +428,7 @@ int tty_hung_up_p(struct file *filp); void do_SAK(struct tty_struct *tty); void __do_SAK(struct tty_struct *tty); void no_tty(void); -speed_t tty_termios_baud_rate(struct ktermios *termios); +speed_t tty_termios_baud_rate(const struct ktermios *termios); void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud); void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, @@ -458,7 +452,7 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty) unsigned char tty_get_char_size(unsigned int cflag); unsigned char tty_get_frame_size(unsigned int cflag); -void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); +void tty_termios_copy_hw(struct ktermios *new, const struct ktermios *old); int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b); int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 4841d8069c07..e00034118c7b 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -7,6 +7,7 @@ #include <linux/kref.h> #include <linux/list.h> #include <linux/cdev.h> +#include <linux/uaccess.h> #include <linux/termios.h> #include <linux/seq_file.h> @@ -141,7 +142,7 @@ struct serial_struct; * * Optional. * - * @set_termios: ``void ()(struct tty_struct *tty, struct ktermios *old)`` + * @set_termios: ``void ()(struct tty_struct *tty, const struct ktermios *old)`` * * This routine allows the @tty driver to be notified when device's * termios settings have changed. New settings are in @tty->termios. @@ -365,7 +366,7 @@ struct tty_operations { unsigned int cmd, unsigned long arg); long (*compat_ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); - void (*set_termios)(struct tty_struct *tty, struct ktermios * old); + void (*set_termios)(struct tty_struct *tty, const struct ktermios *old); void (*throttle)(struct tty_struct * tty); void (*unthrottle)(struct tty_struct * tty); void (*stop)(struct tty_struct *tty); @@ -396,7 +397,6 @@ struct tty_operations { /** * struct tty_driver -- driver for TTY devices * - * @magic: set to %TTY_DRIVER_MAGIC in __tty_alloc_driver() * @kref: reference counting. Reaching zero frees all the internals and the * driver. * @cdevs: allocated/registered character /dev devices @@ -432,7 +432,6 @@ struct tty_operations { * @driver_name, @name, @type, @subtype, @init_termios, and @ops. */ struct tty_driver { - int magic; struct kref kref; struct cdev **cdevs; struct module *owner; @@ -489,9 +488,6 @@ static inline void tty_set_operations(struct tty_driver *driver, driver->ops = op; } -/* tty driver magic number */ -#define TTY_DRIVER_MAGIC 0x5402 - /** * DOC: TTY Driver Flags * diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index ede6f2157f32..dcb61ec11424 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -130,7 +130,7 @@ int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass, * a pointer to wordsize-sensitive structure belongs here, but most of * ldiscs will happily leave it %NULL. * - * @set_termios: [TTY] ``void ()(struct tty_struct *tty, struct ktermios *old)`` + * @set_termios: [TTY] ``void ()(struct tty_struct *tty, const struct ktermios *old)`` * * This function notifies the line discpline that a change has been made * to the termios structure. @@ -227,7 +227,7 @@ struct tty_ldisc_ops { unsigned long arg); int (*compat_ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); - void (*set_termios)(struct tty_struct *tty, struct ktermios *old); + void (*set_termios)(struct tty_struct *tty, const struct ktermios *old); __poll_t (*poll)(struct tty_struct *tty, struct file *file, struct poll_table_struct *wait); void (*hangup)(struct tty_struct *tty); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 8ea319f89e1f..f7bfedb740f5 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -276,8 +276,8 @@ struct usb_serial_driver { unsigned int cmd, unsigned long arg); void (*get_serial)(struct tty_struct *tty, struct serial_struct *ss); int (*set_serial)(struct tty_struct *tty, struct serial_struct *ss); - void (*set_termios)(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); + void (*set_termios)(struct tty_struct *tty, struct usb_serial_port *port, + const struct ktermios *old); void (*break_ctl)(struct tty_struct *tty, int break_state); unsigned int (*chars_in_buffer)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, long timeout); diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index b5ab452fca5b..c1f5aebef170 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -30,7 +30,6 @@ struct vc_data *vc_deallocate(unsigned int console); void reset_palette(struct vc_data *vc); void do_blank_screen(int entering_gfx); void do_unblank_screen(int leaving_gfx); -void unblank_screen(void); void poke_blanked_console(void); int con_font_op(struct vc_data *vc, struct console_font_op *op); int con_set_cmap(unsigned char __user *cmap); diff --git a/kernel/panic.c b/kernel/panic.c index c6eb8f8db0c0..da323209f583 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -329,9 +329,6 @@ void panic(const char *fmt, ...) if (_crash_kexec_post_notifiers) __crash_kexec(NULL); -#ifdef CONFIG_VT - unblank_screen(); -#endif console_unblank(); /* diff --git a/lib/bust_spinlocks.c b/lib/bust_spinlocks.c index 8be59f84eaea..bfd53972a4d8 100644 --- a/lib/bust_spinlocks.c +++ b/lib/bust_spinlocks.c @@ -22,9 +22,6 @@ void bust_spinlocks(int yes) if (yes) { ++oops_in_progress; } else { -#ifdef CONFIG_VT - unblank_screen(); -#endif console_unblank(); if (--oops_in_progress == 0) wake_up_klogd(); diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index ebd78fdbd6e8..b9536641161c 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -855,7 +855,8 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned l return -ENOIOCTLCMD; } -static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old) +static void rfcomm_tty_set_termios(struct tty_struct *tty, + const struct ktermios *old) { struct ktermios *new = &tty->termios; int old_baud_rate = tty_termios_baud_rate(old); |