diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-19 17:05:08 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-19 17:05:08 -0700 |
| commit | 24e44913aa746098349370a0f279733c0cadcba7 (patch) | |
| tree | 51edd7b13d889653b0400d67dd3e7e91a11db75b | |
| parent | 31cc088a4f5d83481c6f5041bd6eb06115b974af (diff) | |
| parent | 7e8a0f10899075ac2665c78c4e49dbaf32bf3346 (diff) | |
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus
Walleij-- the SoC doesn't have active maintainers with hardware,
and in discussions with the vendor the agreement was that it's OK
to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: stm32: use "depends on" instead of "if" after prompt
ARM: sa1100: convert to common clock framework
ARM: exynos: Cleanup cppcheck shifting warning
ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
ARM: exynos: Only build MCPM support if used
arm: add missing include platform-data/atmel.h
ARM: davinci: Use GPIO lookup table for DA850 LEDs
ARM: OMAP2: drop explicit assembler architecture
ARM: use arch_extension directive instead of arch argument
ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
ARM: riscpc: enable chained scatterlist support
ARM: riscpc: reduce IRQ handling code
ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
ARM: riscpc: parse video information from tagged list
ARM: riscpc: add ecard quirk for Atomwide 3port serial card
MAINTAINERS: mvebu: Add git entry
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
ARM: OMAP2+: Make some variables static
...
64 files changed, 492 insertions, 951 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index a63d465d3e2d..9bd4c3b154e8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1264,7 +1264,7 @@ F: include/uapi/drm/panfrost_drm.h ARM MFM AND FLOPPY DRIVERS M: Ian Molton <spyro@f2s.com> S: Maintained -F: arch/arm/lib/floppydma.S +F: arch/arm/mach-rpc/floppydma.S F: arch/arm/include/asm/floppy.h ARM PMU PROFILING AND DEBUGGING @@ -1863,6 +1863,7 @@ F: arch/arm/mach-orion5x/ F: arch/arm/plat-orion/ F: arch/arm/boot/dts/dove* F: arch/arm/boot/dts/orion5x* +T: git git://git.infradead.org/linux-mvebu.git ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support M: Jason Cooper <jason@lakedaemon.net> @@ -1883,6 +1884,7 @@ F: drivers/irqchip/irq-armada-370-xp.c F: drivers/irqchip/irq-mvebu-* F: drivers/pinctrl/mvebu/ F: drivers/rtc/rtc-armada38x.c +T: git git://git.infradead.org/linux-mvebu.git ARM/Mediatek RTC DRIVER M: Eddie Huang <eddie.huang@mediatek.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 600c5ba1af41..33b00579beff 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -377,15 +377,6 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_NETX - bool "Hilscher NetX based" - select ARM_VIC - select CLKSRC_MMIO - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - help - This enables support for systems based on the Hilscher NetX Soc - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -531,7 +522,7 @@ config ARCH_RPC select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE - select ARCH_USES_GETTIMEOFFSET + select ARM_HAS_SG_CHAIN select CPU_SA110 select FIQ select HAVE_IDE @@ -552,6 +543,7 @@ config ARCH_SA1100 select CLKSRC_MMIO select CLKSRC_PXA select TIMER_OF if OF + select COMMON_CLK select CPU_FREQ select CPU_SA1100 select GENERIC_CLOCKEVENTS @@ -770,8 +762,6 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-mxs/Kconfig" -source "arch/arm/mach-netx/Kconfig" - source "arch/arm/mach-nomadik/Kconfig" source "arch/arm/mach-npcm/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9a8862fee738..c929bea9a9ff 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -638,13 +638,6 @@ choice Say Y here if you want kernel low-level debugging support for Mediatek mt8135 based platforms on UART3. - config DEBUG_NETX_UART - bool "Kernel low-level debugging messages via NetX UART" - depends on ARCH_NETX - help - Say Y here if you want kernel low-level debugging support - on Hilscher NetX based platforms. - config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f863c6935d0e..c3624ca6c0bc 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -191,7 +191,6 @@ machine-$(CONFIG_ARCH_MXC) += imx machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut machine-$(CONFIG_ARCH_MXS) += mxs -machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NPCM) += npcm machine-$(CONFIG_ARCH_NSPIRE) += nspire diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig deleted file mode 100644 index cc5c5f9ef720..000000000000 --- a/arch/arm/configs/netx_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_NETX=y -CONFIG_MACH_NXDKN=y -CONFIG_MACH_NXDB500=y -CONFIG_MACH_NXEB500HMI=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySMX0,115200" -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_NET_IPGRE=m -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=y -CONFIG_INET_ESP=y -CONFIG_INET_IPCOMP=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_NETFILTER=y -CONFIG_NET_PKTGEN=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PLATRAM=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_NETX=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_NETX=y -CONFIG_SERIAL_NETX_CONSOLE=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_RTC_CLASS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRC_CCITT=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/include/debug/netx.S b/arch/arm/include/debug/netx.S deleted file mode 100644 index 08afc58885d3..000000000000 --- a/arch/arm/include/debug/netx.S +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks -*/ - -#define UART_DATA 0 -#define UART_FLAG 0x18 -#define UART_FLAG_BUSY (1 << 3) - - .macro addruart, rp, rv, tmp - ldr \rp, =CONFIG_DEBUG_UART_PHYS - ldr \rv, =CONFIG_DEBUG_UART_VIRT - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UART_DATA] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_FLAG] - tst \rd, #UART_FLAG_BUSY - bne 1002b - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UART_FLAG] - tst \rd, #UART_FLAG_BUSY - bne 1001b - .endm diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 0bff0176db2c..b25c54585048 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -31,7 +31,6 @@ else endif ifeq ($(CONFIG_ARCH_RPC),y) - lib-y += ecard.o io-acorn.o floppydma.o AFLAGS_delay-loop.o += -march=armv4 endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index da85e64143e9..d5af6aedc02c 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -15,6 +15,7 @@ #include <linux/suspend.h> #include <linux/clk/at91_pmc.h> +#include <linux/platform_data/atmel.h> #include <asm/cacheflush.h> #include <asm/fncpy.h> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 4ef1e55f4a0b..5e5f1fabc3d4 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -208,6 +208,7 @@ config ARCH_BCM_63XX config ARCH_BRCMSTB bool "Broadcom BCM7XXX based boards" depends on ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARM_GIC select ARM_ERRATA_798181 if SMP select HAVE_ARM_ARCH_TIMER @@ -217,6 +218,7 @@ config ARCH_BRCMSTB select ZONE_DMA if ARM_LPAE select SOC_BRCMSTB select SOC_BUS + select PINCTRL help Say Y if you intend to run the kernel on a Broadcom ARM-based STB chipset. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 8fd23b263c60..b59c813b1af4 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -40,9 +40,6 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o # Support for secure monitor traps obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o -ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec) -CFLAGS_bcm_kona_smc.o += -Wa,-march=armv7-a+sec -DREQUIRES_SEC -endif # BCM2835 obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c index 83dd0c10fa47..641e1f8fcf5e 100644 --- a/arch/arm/mach-bcm/bcm63xx_smp.c +++ b/arch/arm/mach-bcm/bcm63xx_smp.c @@ -141,6 +141,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu, * return */ ret = bcm63xx_pmb_power_on_cpu(dn); + of_node_put(dn); if (ret) goto out; out: diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index a55a7ecf146a..541e850a736c 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -125,9 +125,7 @@ static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys) __asmeq("%2", "r4") __asmeq("%3", "r5") __asmeq("%4", "r6") -#ifdef REQUIRES_SEC ".arch_extension sec\n" -#endif " smc #0\n" : "=r" (ip), "=r" (r0) : "r" (r4), "r" (r5), "r" (r6) diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index b81bb386951d..1238ac801530 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -38,6 +38,7 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd) return; } base = of_iomap(np_wdog, 0); + of_node_put(np_wdog); if (!base) { pr_emerg("Couldn't map brcm,kona-wdt\n"); return; diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c index 12379960e982..4555f21e7077 100644 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -334,11 +334,14 @@ static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) rc = setup_hifcpubiuctrl_regs(np); if (rc) - return; + goto out_put_node; rc = setup_hifcont_regs(np); if (rc) - return; + goto out_put_node; + +out_put_node: + of_node_put(np); } static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 31ae3be5741d..0628e7d7dcf3 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -631,13 +631,12 @@ static void da850_evm_bb_keys_init(unsigned gpio) } } -#define DA850_N_BB_USER_LED 2 - static struct gpio_led da850_evm_bb_leds[] = { - [0 ... DA850_N_BB_USER_LED - 1] = { - .active_low = 1, - .gpio = -1, /* assigned at runtime */ - .name = NULL, /* assigned at runtime */ + { + .name = "user_led2", + }, + { + .name = "user_led1", }, }; @@ -646,6 +645,20 @@ static struct gpio_led_platform_data da850_evm_bb_leds_pdata = { .num_leds = ARRAY_SIZE(da850_evm_bb_leds), }; +static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("i2c-bb-expander", + DA850_EVM_BB_EXP_USER_LED2, NULL, + 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("i2c-bb-expander", + DA850_EVM_BB_EXP_USER_LED2 + 1, NULL, + 1, GPIO_ACTIVE_LOW), + + { }, + }, +}; + static struct platform_device da850_evm_bb_leds_device = { .name = "leds-gpio", .id = -1, @@ -654,20 +667,6 @@ static struct platform_device da850_evm_bb_leds_device = { } }; -static void da850_evm_bb_leds_init(unsigned gpio) -{ - int i; - struct gpio_led *led; - - for (i = 0; i < DA850_N_BB_USER_LED; i++) { - led = &da850_evm_bb_leds[i]; - - led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i; - led->name = - da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i]; - } -} - static int da850_evm_bb_expander_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *c) @@ -685,7 +684,7 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client, goto io_exp_setup_sw_fail; } - da850_evm_bb_leds_init(gpio); + gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table); ret = platform_device_register(&da850_evm_bb_leds_device); if (ret) { pr_warn("Could not register baseboard GPIO expander LEDs"); @@ -729,10 +728,12 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { }, { I2C_BOARD_INFO("tca6416", 0x20), + .dev_name = "ui-expander", .platform_data = &da850_evm_ui_expander_info, }, { I2C_BOARD_INFO("tca6416", 0x21), + .dev_name = "bb-expander", .platform_data = &da850_evm_bb_expander_info, }, }; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 1c518b8ee520..d7422233a130 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -49,6 +49,7 @@ config S5P_DEV_MFC config ARCH_EXYNOS3 bool "SAMSUNG EXYNOS3" + default y select ARM_CPU_SUSPEND if PM help Samsung EXYNOS3 (Cortex-A7) SoC based systems @@ -106,7 +107,7 @@ config SOC_EXYNOS5420 bool "SAMSUNG EXYNOS5420" default y depends on ARCH_EXYNOS5 - select MCPM if SMP + select EXYNOS_MCPM if SMP select ARM_CCI400_PORT_CTRL select ARM_CPU_SUSPEND @@ -115,6 +116,10 @@ config SOC_EXYNOS5800 default y depends on SOC_EXYNOS5420 +config EXYNOS_MCPM + bool + select MCPM + config EXYNOS_CPU_SUSPEND bool select ARM_CPU_SUSPEND diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 264dbaa89c3d..0fd3fcf8bfb0 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -14,9 +14,5 @@ obj-$(CONFIG_PM_SLEEP) += suspend.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) - -obj-$(CONFIG_MCPM) += mcpm-exynos.o +obj-$(CONFIG_EXYNOS_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a diff --git a/arch/arm/mach-exynos/exynos-smc.S b/arch/arm/mach-exynos/exynos-smc.S index d259532ba937..6da31e6a7acb 100644 --- a/arch/arm/mach-exynos/exynos-smc.S +++ b/arch/arm/mach-exynos/exynos-smc.S @@ -10,7 +10,8 @@ /* * Function signature: void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3) */ - + .arch armv7-a + .arch_extension sec ENTRY(exynos_smc) stmfd sp!, {r4-r11, lr} dsb diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index 2783c3a0c06a..ed93f91853b8 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -44,7 +44,8 @@ ENTRY(exynos_cpu_resume) ENDPROC(exynos_cpu_resume) .align - + .arch armv7-a + .arch_extension sec ENTRY(exynos_cpu_resume_ns) mrc p15, 0, r0, c0, c0, 0 ldr r1, =CPU_MASK diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index be122af0de8f..6a0d3448ea00 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -268,7 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg) unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - if (IS_ENABLED(CONFIG_MCPM)) { + if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) { mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume); mcpm_cpu_suspend(); } @@ -285,7 +285,7 @@ static void exynos_pm_set_wakeup_mask(void) * Set wake-up mask registers * EXYNOS_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend. */ - pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); + pmu_raw_writel(exynos_irqwake_intmask & ~BIT(31), S5P_WAKEUP_MASK); } static void exynos_pm_enter_sleep_mode(void) @@ -351,7 +351,7 @@ static void exynos5420_pm_prepare(void) exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ - if (IS_ENABLED(CONFIG_MCPM)) + if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0); tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0)); @@ -455,7 +455,7 @@ static void exynos5420_prepare_pm_resume(void) mpidr = read_cpuid_mpidr(); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - if (IS_ENABLED(CONFIG_MCPM)) + if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) WARN_ON(mcpm_cpu_powered_up()); if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) { diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index 7e6732c16862..71cc68041d92 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y := highbank.o system.o smc.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) - obj-$(CONFIG_PM_SLEEP) += pm.o diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S index b16c0442e812..78b3f19e7f37 100644 --- a/arch/arm/mach-highbank/smc.S +++ b/arch/arm/mach-highbank/smc.S @@ -13,7 +13,8 @@ * the monitor API number. * Function signature : void highbank_smc1(u32 fn, u32 arg) */ - + .arch armv7-a + .arch_extension sec ENTRY(highbank_smc1) stmfd sp!, {r4-r11, lr} mov r12, r0 diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index a2441ed6b673..39a7d9393641 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -14,22 +14,22 @@ #include "hardware.h" static int num_idle_cpus = 0; -static DEFINE_SPINLOCK(cpuidle_lock); +static DEFINE_RAW_SPINLOCK(cpuidle_lock); static int imx6q_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - spin_lock(&cpuidle_lock); + raw_spin_lock(&cpuidle_lock); if (++num_idle_cpus == num_online_cpus()) imx6_set_lpm(WAIT_UNCLOCKED); - spin_unlock(&cpuidle_lock); + raw_spin_unlock(&cpuidle_lock); cpu_do_idle(); - spin_lock(&cpuidle_lock); + raw_spin_lock(&cpuidle_lock); if (num_idle_cpus-- == num_online_cpus()) imx6_set_lpm(WAIT_CLOCKED); - spin_unlock(&cpuidle_lock); + raw_spin_unlock(&cpuidle_lock); return index; } diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index dec5d90a66ce..95713450591a 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -94,6 +94,12 @@ static void __init imx7d_init_machine(void) imx7d_enet_init(); } +static void __init imx7d_init_late(void) +{ + if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT)) + platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0); +} + static void __init imx7d_init_irq(void) { imx_init_revision_from_anatop(); @@ -110,5 +116,6 @@ static const char *const imx7d_dt_compat[] __initconst = { DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)") .init_irq = imx7d_init_irq, .init_machine = imx7d_init_machine, + .init_late = imx7d_init_late, .dt_compat = imx7d_dt_compat, MACHINE_END diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile index f8b0dccac8dc..739b38be5696 100644 --- a/arch/arm/mach-keystone/Makefile +++ b/arch/arm/mach-keystone/Makefile @@ -1,9 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-y := keystone.o smc.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) - obj-$(CONFIG_SMP) += platsmp.o # PM domain driver for Keystone SOCs diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S index 76d0bf6ac73c..21ef75cf5370 100644 --- a/arch/arm/mach-keystone/smc.S +++ b/arch/arm/mach-keystone/smc.S @@ -18,6 +18,7 @@ * * Return: Non zero value on failure */ + .arch_extension sec ENTRY(keystone_cpu_smc) stmfd sp!, {r4-r11, lr} smc #0 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 85d1b13c9215..600650551621 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -41,18 +41,10 @@ obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y) sleep44xx.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) - # Functions loaded to SRAM obj-$(CONFIG_SOC_OMAP2420) += sram242x.o obj-$(CONFIG_SOC_OMAP2430) += sram243x.o -AFLAGS_sram242x.o :=-Wa,-march=armv6 -AFLAGS_sram243x.o :=-Wa,-march=armv6 - # Restart code (OMAP4/5 currently in omap4-common.c) obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o @@ -94,11 +86,6 @@ obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o -AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep33xx.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep43xx.o :=-Wa,-march=armv7-a$(plus_sec) - endif ifeq ($(CONFIG_CPU_IDLE),y) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 7d0db77ab8cb..1762f919941f 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -55,6 +55,8 @@ ENDPROC(omap5_secondary_startup) * omap5_secondary_startup if the primary CPU was put into HYP mode by * the boot loader. */ + .arch armv7-a + .arch_extension sec ENTRY(omap5_secondary_hyp_startup) wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 ldr r0, [r2] diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S index 630b9bd099e0..fd2bcd91f4a1 100644 --- a/arch/arm/mach-omap2/omap-smc.S +++ b/arch/arm/mach-omap2/omap-smc.S @@ -20,7 +20,8 @@ * link register "lr". * Function signature : void omap_smc1(u32 fn, u32 arg) */ - + .arch armv7-a + .arch_extension sec ENTRY(omap_smc1) stmfd sp!, {r2-r12, lr} mov r12, r0 diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 4c3543bae562..adb6271f819b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -529,7 +529,7 @@ static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -struct omap_hwmod_class am33xx_gpio_hwmod_class = { +static struct omap_hwmod_class am33xx_gpio_hwmod_class = { .name = "gpio", .sysc = &am33xx_gpio_sysc, }; @@ -539,7 +539,7 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { { .role = "dbclk", .clk = "gpio1_dbclk" }, }; -struct omap_hwmod am33xx_gpio1_hwmod = { +static struct omap_hwmod am33xx_gpio1_hwmod = { .name = "gpio2", .class = &am33xx_gpio_hwmod_class, .clkdm_name = "l4ls_clkdm", @@ -559,7 +559,7 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { { .role = "dbclk", .clk = "gpio2_dbclk" }, }; -struct omap_hwmod am33xx_gpio2_hwmod = { +static struct omap_hwmod am33xx_gpio2_hwmod = { .name = "gpio3", .class = &am33xx_gpio_hwmod_class, .clkdm_name = "l4ls_clkdm", @@ -579,7 +579,7 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { { .role = "dbclk", .clk = "gpio3_dbclk" }, }; -struct omap_hwmod am33xx_gpio3_hwmod = { +static struct omap_hwmod am33xx_gpio3_hwmod = { .name = "gpio4", .class = &am33xx_gpio_hwmod_class, .clkdm_name = "l4ls_clkdm", diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S index 47a816468cdb..68fee339d3f1 100644 --- a/arch/arm/mach-omap2/sleep33xx.S +++ b/arch/arm/mach-omap2/sleep33xx.S @@ -24,6 +24,7 @@ #define BIT(nr) (1 << (nr)) .arm + .arch armv7-a .align 3 ENTRY(am33xx_do_wfi) diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 75ea4723ec0e..ac1324c6453b 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -83,6 +83,8 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore) * * r0 = physical address of the parameters */ + .arch armv7-a + .arch_extension sec ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack mov r3, r0 @ physical address of parameters diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S index 0c1031442571..c1f4e4852644 100644 --- a/arch/arm/mach-omap2/sleep43xx.S +++ b/arch/arm/mach-omap2/sleep43xx.S @@ -56,6 +56,8 @@ #define RTC_PMIC_EXT_WAKEUP_EN BIT(0) .arm + .arch armv7-a + .arch_extension sec .align 3 ENTRY(am43xx_do_wfi) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 934033ad847f..f60f6a9aed73 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -18,8 +18,11 @@ #include "omap44xx.h" #include "omap4-sar-layout.h" + .arch armv7-a + #if defined(CONFIG_SMP) && defined(CONFIG_PM) + .arch_extension sec .macro DO_SMC dsb smc #0 diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 72b5c3db37dc..a3af4a2f9446 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -47,7 +47,3 @@ #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) #define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32) - -#ifndef __ASSEMBLY__ -extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); -#endif diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index a3ecccc24ec5..742d18a1f7dc 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -116,12 +116,11 @@ void lubbock_set_hexled(uint32_t value) static struct gpio_chip *lubbock_misc_wr_gc; -void lubbock_set_misc_wr(unsigned int mask, unsigned int set) +static void lubbock_set_misc_wr(unsigned int mask, unsigned int set) { unsigned long m = mask, v = set; lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v); } -EXPORT_SYMBOL(lubbock_set_misc_wr); static int lubbock_udc_is_connected(void) { diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 909fffee0240..649e0a54784c 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -269,19 +269,25 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) sram_base_addr = of_iomap(node, 0); if (!sram_base_addr) { pr_err("%s: could not map sram registers\n", __func__); + of_node_put(node); return; } - if (has_pmu && rockchip_smp_prepare_pmu()) + if (has_pmu && rockchip_smp_prepare_pmu()) { + of_node_put(node); return; + } if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { - if (rockchip_smp_prepare_sram(node)) + if (rockchip_smp_prepare_sram(node)) { + of_node_put(node); return; + } /* enable the SCU power domain */ pmu_set_power_domain(PMU_PWRDN_SCU, true); + of_node_put(node); node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); if (!node) { pr_err("%s: missing scu\n", __func__); @@ -291,6 +297,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) scu_base_addr = of_iomap(node, 0); if (!scu_base_addr) { pr_err("%s: could not map scu registers\n", __func__); + of_node_put(node); return; } @@ -309,6 +316,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr)); ncores = ((l2ctlr >> 24) & 0x3) + 1; } + of_node_put(node); /* Make sure that all cores except the first are really off */ for (i = 1; i < ncores; i++) diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index 744b5b332e42..87389d9456b9 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -257,12 +257,14 @@ static int __init rk3288_suspend_init(struct device_node *np) rk3288_bootram_base = of_iomap(sram_np, 0); if (!rk3288_bootram_base) { pr_err("%s: could not map bootram base\n", __func__); + of_node_put(sram_np); return -ENOMEM; } ret = of_address_to_resource(sram_np, 0, &res); if (ret) { pr_err("%s: could not get bootram phy addr\n", __func__); + of_node_put(sram_np); return ret; } rk3288_bootram_phy = res.start; diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index 056ef5460290..90a645a18444 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile @@ -5,4 +5,5 @@ # Object file lists. -obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o +obj-y :=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \ + riscpc.o time.o diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index 488d5c3b37f4..50e0f97afd75 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -24,10 +24,11 @@ struct iomd_dma { struct dma_struct dma; - unsigned int state; - unsigned long base; /* Controller base address */ + void __iomem *base; /* Controller base address */ int irq; /* Controller IRQ */ - struct scatterlist cur_sg; /* Current controller buffer */ + unsigned int state; + dma_addr_t cur_addr; + unsigned int cur_len; dma_addr_t dma_addr; unsigned int dma_len; }; @@ -50,13 +51,13 @@ typedef enum { #define CR (IOMD_IO0CR - IOMD_IO0CURA) #define ST (IOMD_IO0ST - IOMD_IO0CURA) -static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) +static void iomd_get_next_sg(struct iomd_dma *idma) { unsigned long end, offset, flags = 0; if (idma->dma.sg) { - sg->dma_address = idma->dma_addr; - offset = sg->dma_address & ~PAGE_MASK; + idma->cur_addr = idma->dma_addr; + offset = idma->cur_addr & ~PAGE_MASK; end = offset + idma->dma_len; @@ -66,7 +67,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) if (offset + TRANSFER_SIZE >= end) flags |= DMA_END_L; - sg->length = end - TRANSFER_SIZE; + idma->cur_len = end - TRANSFER_SIZE; idma->dma_len -= end - offset; idma->dma_addr += end - offset; @@ -84,52 +85,49 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) } } else { flags = DMA_END_S | DMA_END_L; - sg->dma_address = 0; - sg->length = 0; + idma->cur_addr = 0; + idma->cur_len = 0; } - sg->length |= flags; + idma->cur_len |= flags; } static irqreturn_t iomd_dma_handle(int irq, void *dev_id) { struct iomd_dma *idma = dev_id; - unsigned long base = idma->base; + void __iomem *base = idma->base; + unsigned int state = idma->state; + unsigned int status, cur, end; do { - unsigned int status; - - status = iomd_readb(base + ST); + status = readb(base + ST); if (!(status & DMA_ST_INT)) - return IRQ_HANDLED; - - if ((idma->state ^ status) & DMA_ST_AB) - iomd_get_next_sg(&idma->cur_sg, idma); - - switch (status & (DMA_ST_OFL | DMA_ST_AB)) { - case DMA_ST_OFL: /* OIA */ - case DMA_ST_AB: /* .IB */ - iomd_writel(idma->cur_sg.dma_address, base + CURA); - iomd_writel(idma->cur_sg.length, base + ENDA); - idma->state = DMA_ST_AB; - break; - - case DMA_ST_OFL | DMA_ST_AB: /* OIB */ - case 0: /* .IA */ - iomd_writel(idma->cur_sg.dma_address, base + CURB); - iomd_writel(idma->cur_sg.length, base + ENDB); - idma->state = 0; - break; + goto out; + + if ((state ^ status) & DMA_ST_AB) + iomd_get_next_sg(idma); + + // This efficiently implements state = OFL != AB ? AB : 0 + state = ((status >> 2) ^ status) & DMA_ST_AB; + if (state) { + cur = CURA; + end = ENDA; + } else { + cur = CURB; + end = ENDB; } + writel(idma->cur_addr, base + cur); + writel(idma->cur_len, base + end); if (status & DMA_ST_OFL && - idma->cur_sg.length == (DMA_END_S|DMA_END_L)) + idma->cur_len == (DMA_END_S|DMA_END_L)) break; } while (1); - idma->state = ~DMA_ST_AB; - disable_irq(irq); - + state = ~DMA_ST_AB; + disable_irq_nosync(irq); +out: + idma->state = state; return IRQ_HANDLED; } @@ -157,7 +155,7 @@ static struct device isa_dma_dev = { static void iomd_enable_dma(unsigned int chan, dma_t *dma) { struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); - unsigned long dma_base = idma->base; + void __iomem *base = idma->base; unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E; if (idma->dma.invalid) { @@ -177,27 +175,30 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma) DMA_FROM_DEVICE : DMA_TO_DEVICE); } - iomd_writeb(DMA_CR_C, dma_base + CR); + idma->dma_addr = idma->dma.sg->dma_address; + idma->dma_len = idma->dma.sg->length; + + writeb(DMA_CR_C, base + CR); idma->state = DMA_ST_AB; } if (idma->dma.dma_mode == DMA_MODE_READ) ctrl |= DMA_CR_D; - iomd_writeb(ctrl, dma_base + CR); + writeb(ctrl, base + CR); enable_irq(idma->irq); } static void iomd_disable_dma(unsigned int chan, dma_t *dma) { struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); - unsigned long dma_base = idma->base; + void __iomem *base = idma->base; unsigned long flags; local_irq_save(flags); if (idma->state != ~DMA_ST_AB) disable_irq(idma->irq); - iomd_writeb(0, dma_base + CR); + writeb(0, base + CR); local_irq_restore(flags); } @@ -360,17 +361,17 @@ static int __init rpc_dma_init(void) */ iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT); - iomd_dma[DMA_0].base = IOMD_IO0CURA; + iomd_dma[DMA_0].base = IOMD_BASE + IOMD_IO0CURA; iomd_dma[DMA_0].irq = IRQ_DMA0; - iomd_dma[DMA_1].base = IOMD_IO1CURA; + iomd_dma[DMA_1].base = IOMD_BASE + IOMD_IO1CURA; iomd_dma[DMA_1].irq = IRQ_DMA1; - iomd_dma[DMA_2].base = IOMD_IO2CURA; + iomd_dma[DMA_2].base = IOMD_BASE + IOMD_IO2CURA; iomd_dma[DMA_2].irq = IRQ_DMA2; - iomd_dma[DMA_3].base = IOMD_IO3CURA; + iomd_dma[DMA_3].base = IOMD_BASE + IOMD_IO3CURA; iomd_dma[DMA_3].irq = IRQ_DMA3; - iomd_dma[DMA_S0].base = IOMD_SD0CURA; + iomd_dma[DMA_S0].base = IOMD_BASE + IOMD_SD0CURA; iomd_dma[DMA_S0].irq = IRQ_DMAS0; - iomd_dma[DMA_S1].base = IOMD_SD1CURA; + iomd_dma[DMA_S1].base = IOMD_BASE + IOMD_SD1CURA; iomd_dma[DMA_S1].irq = IRQ_DMAS1; for (i = DMA_0; i <= DMA_S1; i++) { diff --git a/arch/arm/lib/ecard.S b/arch/arm/mach-rpc/ecard-loader.S index eb8ac0412da6..eb8ac0412da6 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/mach-rpc/ecard-loader.S diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index cf0593bc42d2..75cfad2cb143 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -67,17 +67,21 @@ struct expcard_blacklist { unsigned short manufacturer; unsigned short product; const char *type; + void (*init)(ecard_t *ec); }; static ecard_t *cards; static ecard_t *slot_to_expcard[MAX_ECARDS]; static unsigned int ectcr; +static void atomwide_3p_quirk(ecard_t *ec); + /* List of descriptions of cards which don't have an extended * identification, or chunk directories containing a description. */ static struct expcard_blacklist __initdata blacklist[] = { - { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" } + { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }, + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk }, }; asmlinkage extern int @@ -493,18 +497,21 @@ static void ecard_dump_irq_state(void) printk("Expansion card IRQ state:\n"); for (ec = cards; ec; ec = ec->next) { + const char *claimed; + if (ec->slot_no == 8) continue; - printk(" %d: %sclaimed, ", - ec->slot_no, ec->claimed ? "" : "not "); + claimed = ec->claimed ? "" : "not "; if (ec->ops && ec->ops->irqpending && ec->ops != &ecard_default_ops) - printk("irq %spending\n", + printk(" %d: %sclaimed irq %spending\n", + ec->slot_no, claimed, ec->ops->irqpending(ec) ? "" : "not "); else - printk("irqaddr %p, mask = %02X, status = %02X\n", + printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n", + ec->slot_no, claimed, ec->irqaddr, ec->irqmask, readb(ec->irqaddr)); } } @@ -865,6 +872,16 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, } EXPORT_SYMBOL(ecardm_iomap); +static void atomwide_3p_quirk(ecard_t *ec) +{ + void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC); + unsigned int i; + + /* Disable interrupts on each port */ + for (i = 0x2000; i <= 0x2800; i += 0x0400) + writeb(0, addr + i + 4); +} + /* * Probe for an expansion card. * @@ -921,7 +938,10 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type) for (i = 0; i < ARRAY_SIZE(blacklist); i++) if (blacklist[i].manufacturer == ec->cid.manufacturer && blacklist[i].product == ec->cid.product) { - ec->card_desc = blacklist[i].type; + if (blacklist[i].type) + ec->card_desc = blacklist[i].type; + if (blacklist[i].init) + blacklist[i].init(ec); break; } diff --git a/arch/arm/lib/floppydma.S b/arch/arm/mach-rpc/floppydma.S index 6698b83050dc..6698b83050dc 100644 --- a/arch/arm/lib/floppydma.S +++ b/arch/arm/mach-rpc/floppydma.S diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index a023b5f9bbbb..1fbe7eb956fd 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -115,29 +115,22 @@ static void arch_decomp_setup(void) struct tag *t = (struct tag *)params; unsigned int nr_pages = 0, page_size = PAGE_SIZE; - if (t->hdr.tag == ATAG_CORE) - { - for (; t->hdr.size; t = tag_next(t)) - { - if (t->hdr.tag == ATAG_VIDEOTEXT) - { + if (t->hdr.tag == ATAG_CORE) { + for (; t->hdr.size; t = tag_next(t)) { + if (t->hdr.tag == ATAG_VIDEOTEXT) { video_num_rows = t->u.videotext.video_lines; video_num_cols = t->u.videotext.video_cols; - bytes_per_char_h = t->u.videotext.video_points; - bytes_per_char_v = t->u.videotext.video_points; video_x = t->u.videotext.x; video_y = t->u.videotext.y; - } - - if (t->hdr.tag == ATAG_MEM) - { + } else if (t->hdr.tag == ATAG_VIDEOLFB) { + bytes_per_char_h = t->u.videolfb.lfb_depth; + bytes_per_char_v = 8; + } else if (t->hdr.tag == ATAG_MEM) { page_size = PAGE_SIZE; nr_pages += (t->u.mem.size / PAGE_SIZE); } } - } - else - { + } else { nr_pages = params->nr_pages; page_size = params->page_size; video_num_rows = params->video_num_rows; diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S index b9082a2a2a01..b9082a2a2a01 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/mach-rpc/io-acorn.S diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index b8a61cb11207..803aeb126f0e 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -8,117 +8,71 @@ #include <asm/irq.h> #include <asm/fiq.h> -static void iomd_ack_irq_a(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val & ~mask, IOMD_IRQMASKA); - iomd_writeb(mask, IOMD_IRQCLRA); -} - -static void iomd_mask_irq_a(struct irq_data *d) -{ - unsigned int val, mask; +// These are offsets from the stat register for each IRQ bank +#define STAT 0x00 +#define REQ 0x04 +#define CLR 0x04 +#define MASK 0x08 - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val & ~mask, IOMD_IRQMASKA); -} - -static void iomd_unmask_irq_a(struct irq_data *d) +static void __iomem *iomd_get_base(struct irq_data *d) { - unsigned int val, mask; + void *cd = irq_data_get_irq_chip_data(d); - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val | mask, IOMD_IRQMASKA); + return (void __iomem *)(unsigned long)cd; } -static struct irq_chip iomd_a_chip = { - .irq_ack = iomd_ack_irq_a, - .irq_mask = iomd_mask_irq_a, - .irq_unmask = iomd_unmask_irq_a, -}; - -static void iomd_mask_irq_b(struct irq_data *d) +static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask) { - unsigned int val, mask; + struct irq_data *d = irq_get_irq_data(irq); - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_IRQMASKB); - iomd_writeb(val & ~mask, IOMD_IRQMASKB); + d->mask = mask; + irq_set_chip_data(irq, (void *)(unsigned long)base); } -static void iomd_unmask_irq_b(struct irq_data *d) +static void iomd_irq_mask_ack(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_IRQMASKB); - iomd_writeb(val | mask, IOMD_IRQMASKB); + val = readb(base + MASK); + writeb(val & ~mask, base + MASK); + writeb(mask, base + CLR); } -static struct irq_chip iomd_b_chip = { - .irq_ack = iomd_mask_irq_b, - .irq_mask = iomd_mask_irq_b, - .irq_unmask = iomd_unmask_irq_b, -}; - -static void iomd_mask_irq_dma(struct irq_data *d) +static void iomd_irq_mask(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_DMAMASK); - iomd_writeb(val & ~mask, IOMD_DMAMASK); + val = readb(base + MASK); + writeb(val & ~mask, base + MASK); } -static void iomd_unmask_irq_dma(struct irq_data *d) +static void iomd_irq_unmask(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_DMAMASK); - iomd_writeb(val | mask, IOMD_DMAMASK); + val = readb(base + MASK); + writeb(val | mask, base + MASK); } -static struct irq_chip iomd_dma_chip = { - .irq_ack = iomd_mask_irq_dma, - .irq_mask = iomd_mask_irq_dma, - .irq_unmask = iomd_unmask_irq_dma, +static struct irq_chip iomd_chip_clr = { + .irq_mask_ack = iomd_irq_mask_ack, + .irq_mask = iomd_irq_mask, + .irq_unmask = iomd_irq_unmask, }; -static void iomd_mask_irq_fiq(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_FIQMASK); - iomd_writeb(val & ~mask, IOMD_FIQMASK); -} - -static void iomd_unmask_irq_fiq(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_FIQMASK); - iomd_writeb(val | mask, IOMD_FIQMASK); -} - -static struct irq_chip iomd_fiq_chip = { - .irq_ack = iomd_mask_irq_fiq, - .irq_mask = iomd_mask_irq_fiq, - .irq_unmask = iomd_unmask_irq_fiq, +static struct irq_chip iomd_chip_noclr = { + .irq_mask = iomd_irq_mask, + .irq_unmask = iomd_irq_unmask, }; extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end; void __init rpc_init_irq(void) { - unsigned int irq, clr, set = 0; + unsigned int irq, clr, set; iomd_writeb(0, IOMD_IRQMASKA); iomd_writeb(0, IOMD_IRQMASKB); @@ -130,6 +84,7 @@ void __init rpc_init_irq(void) for (irq = 0; irq < NR_IRQS; irq++) { clr = IRQ_NOREQUEST; + set = 0; if (irq <= 6 || (irq >= 9 && irq <= 15)) clr |= IRQ_NOPROBE; @@ -140,30 +95,37 @@ void __init rpc_init_irq(void) switch (irq) { case 0 ... 7: - irq_set_chip_and_handler(irq, &iomd_a_chip, + irq_set_chip_and_handler(irq, &iomd_chip_clr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA, + BIT(irq)); break; case 8 ... 15: - irq_set_chip_and_handler(irq, &iomd_b_chip, + irq_set_chip_and_handler(irq, &iomd_chip_noclr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB, + BIT(irq - 8)); break; case 16 ... 21: - irq_set_chip_and_handler(irq, &iomd_dma_chip, + irq_set_chip_and_handler(irq, &iomd_chip_noclr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT, + BIT(irq - 16)); break; case 64 ... 71: - irq_set_chip(irq, &iomd_fiq_chip); + irq_set_chip(irq, &iomd_chip_noclr); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT, + BIT(irq - 64)); break; } } init_FIQ(FIQ_START); } - diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index e97f93a0af1d..1d750152b160 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -10,7 +10,7 @@ * 04-Dec-1997 RMK Updated for new arch/arm/time.c * 13=Jun-2004 DS Moved to arch/arm/common b/c shared w/CLPS7500 */ -#include <linux/timex.h> +#include <linux/clocksource.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -24,11 +24,15 @@ #define RPC_CLOCK_FREQ 2000000 #define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ) -static u32 ioc_timer_gettimeoffset(void) +static u32 ioc_time; + +static u64 ioc_timer_read(struct clocksource *cs) { unsigned int count1, count2, status; - long offset; + unsigned long flags; + u32 ticks; + local_irq_save(flags); ioc_writeb (0, IOC_T0LATCH); barrier (); count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8); @@ -38,27 +42,34 @@ static u32 ioc_timer_gettimeoffset(void) ioc_writeb (0, IOC_T0LATCH); barrier (); count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8); + ticks = ioc_time + RPC_LATCH - count2; + local_irq_restore(flags); - offset = count2; if (count2 < count1) { /* - * We have not had an interrupt between reading count1 - * and count2. + * The timer has not reloaded between reading count1 and + * count2, check whether an interrupt was actually pending. */ if (status & (1 << 5)) - offset -= RPC_LATCH; + ticks += RPC_LATCH; } else if (count2 > count1) { /* - * We have just had another interrupt between reading - * count1 and count2. + * The timer has reloaded, so count2 indicates the new + * count since the wrap. The interrupt would not have + * been processed, so add the missed ticks. */ - offset -= RPC_LATCH; + ticks += RPC_LATCH; } - offset = (RPC_LATCH - offset) * (tick_nsec / 1000); - return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000; + return ticks; } +static struct clocksource ioctime_clocksource = { + .read = ioc_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .rating = 100, +}; + void __init ioctime_init(void) { ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL); @@ -69,6 +80,7 @@ void __init ioctime_init(void) static irqreturn_t ioc_timer_interrupt(int irq, void *dev_id) { + ioc_time += RPC_LATCH; timer_tick(); return IRQ_HANDLED; } @@ -83,7 +95,7 @@ static struct irqaction ioc_timer_irq = { */ void __init ioc_timer_init(void) { - arch_gettimeoffset = ioc_timer_gettimeoffset; + WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ)); ioctime_init(); setup_irq(IRQ_TIMER0, &ioc_timer_irq); } diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index dd8d13fb8450..d96a101e5504 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -519,6 +519,29 @@ static const struct gpio_keys_platform_data assabet_keys_pdata = { .rep = 0, }; +static struct gpiod_lookup_table assabet_uart1_gpio_table = { + .dev_id = "sa11x0-uart.1", + .table = { + GPIO_LOOKUP("assabet", 16, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 17, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 25, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 26, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 27, "dsr", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table assabet_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("assabet", 28, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 29, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 30, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 31, "rng", GPIO_ACTIVE_LOW), + { }, + }, +}; + static void __init assabet_init(void) { /* @@ -565,7 +588,10 @@ static void __init assabet_init(void) neponset_resources, ARRAY_SIZE(neponset_resources)); #endif } else { + gpiod_add_lookup_table(&assabet_uart1_gpio_table); + gpiod_add_lookup_table(&assabet_uart3_gpio_table); gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table); + sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata, assabet_cf_vcc_consumers, ARRAY_SIZE(assabet_cf_vcc_consumers), @@ -655,74 +681,13 @@ static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate) { if (port->mapbase == _Ser1UTCR0) { if (state) - ASSABET_BCR_clear(ASSABET_BCR_RS232EN | - ASSABET_BCR_COM_RTS | - ASSABET_BCR_COM_DTR); - else - ASSABET_BCR_set(ASSABET_BCR_RS232EN | - ASSABET_BCR_COM_RTS | - ASSABET_BCR_COM_DTR); - } -} - -/* - * Assabet uses COM_RTS and COM_DTR for both UART1 (com port) - * and UART3 (radio module). We only handle them for UART1 here. - */ -static void assabet_set_mctrl(struct uart_port *port, u_int mctrl) -{ - if (port->mapbase == _Ser1UTCR0) { - u_int set = 0, clear = 0; - - if (mctrl & TIOCM_RTS) - clear |= ASSABET_BCR_COM_RTS; + ASSABET_BCR_clear(ASSABET_BCR_RS232EN); else - set |= ASSABET_BCR_COM_RTS; - - if (mctrl & TIOCM_DTR) - clear |= ASSABET_BCR_COM_DTR; - else - set |= ASSABET_BCR_COM_DTR; - - ASSABET_BCR_clear(clear); - ASSABET_BCR_set(set); - } -} - -static u_int assabet_get_mctrl(struct uart_port *port) -{ - u_int ret = 0; - u_int bsr = ASSABET_BSR; - - /* need 2 reads to read current value */ - bsr = ASSABET_BSR; - - if (port->mapbase == _Ser1UTCR0) { - if (bsr & ASSABET_BSR_COM_DCD) - ret |= TIOCM_CD; - if (bsr & ASSABET_BSR_COM_CTS) - ret |= TIOCM_CTS; - if (bsr & ASSABET_BSR_COM_DSR) - ret |= TIOCM_DSR; - } else if (port->mapbase == _Ser3UTCR0) { - if (bsr & ASSABET_BSR_RAD_DCD) - ret |= TIOCM_CD; - if (bsr & ASSABET_BSR_RAD_CTS) - ret |= TIOCM_CTS; - if (bsr & ASSABET_BSR_RAD_DSR) - ret |= TIOCM_DSR; - if (bsr & ASSABET_BSR_RAD_RI) - ret |= TIOCM_RI; - } else { - ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; + ASSABET_BCR_set(ASSABET_BCR_RS232EN); } - - return ret; } static struct sa1100_port_fns assabet_port_fns __initdata = { - .set_mctrl = assabet_set_mctrl, - .get_mctrl = assabet_get_mctrl, .pm = assabet_uart_pm, }; diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index bc0e0e24ecb7..de79f3502045 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -311,8 +311,6 @@ badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate) } static struct sa1100_port_fns badge4_port_fns __initdata = { - //.get_mctrl = badge4_get_mctrl, - //.set_mctrl = badge4_set_mctrl, .pm = badge4_uart_pm, }; diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index 6199e87447ca..e8691921c69a 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -2,176 +2,144 @@ /* * linux/arch/arm/mach-sa1100/clock.c */ -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/string.h> #include <linux/clk.h> -#include <linux/spinlock.h> -#include <linux/mutex.h> -#include <linux/io.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/spinlock.h> #include <mach/hardware.h> #include <mach/generic.h> -struct clkops { - void (*enable)(struct clk *); - void (*disable)(struct clk *); - unsigned long (*get_rate)(struct clk *); +static const char * const clk_tucr_parents[] = { + "clk32768", "clk3686400", }; -struct clk { - const struct clkops *ops; - unsigned int enabled; -}; - -#define DEFINE_CLK(_name, _ops) \ -struct clk clk_##_name = { \ - .ops = _ops, \ - } - -static DEFINE_SPINLOCK(clocks_lock); - -/* Dummy clk routine to build generic kernel parts that may be using them */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - return clk_get_rate(clk); -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - return 0; -} -EXPORT_SYMBOL(clk_set_parent); +static DEFINE_SPINLOCK(tucr_lock); -struct clk *clk_get_parent(struct clk *clk) +static int clk_gpio27_enable(struct clk_hw *hw) { - return NULL; -} -EXPORT_SYMBOL(clk_get_parent); + unsigned long flags; -static void clk_gpio27_enable(struct clk *clk) -{ /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: * (SA-1110 Developer's Manual, section 9.1.2.1) */ + local_irq_save(flags); GAFR |= GPIO_32_768kHz; GPDR |= GPIO_32_768kHz; - TUCR = TUCR_3_6864MHz; + local_irq_restore(flags); + + return 0; } -static void clk_gpio27_disable(struct clk *clk) +static void clk_gpio27_disable(struct clk_hw *hw) { - TUCR = 0; + unsigned long flags; + + local_irq_save(flags); GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; + local_irq_restore(flags); } -static void clk_cpu_enable(struct clk *clk) -{ -} +static const struct clk_ops clk_gpio27_ops = { + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; -static void clk_cpu_disable(struct clk *clk) -{ -} +static const char * const clk_gpio27_parents[] = { + "tucr-mux", +}; -static unsigned long clk_cpu_get_rate(struct clk *clk) +static const struct clk_init_data clk_gpio27_init_data __initconst = { + .name = "gpio27", + .ops = &clk_gpio27_ops, + .parent_names = clk_gpio27_parents, + .num_parents = ARRAY_SIZE(clk_gpio27_parents), +}; + +/* + * Derived from the table 8-1 in the SA1110 manual, the MPLL appears to + * multiply its input rate by 4 x (4 + PPCR). This calculation gives + * the exact rate. The figures given in the table are the rates rounded + * to 100kHz. Stick with sa11x0_getspeed() for the time being. + */ +static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw, + unsigned long prate) { return sa11x0_getspeed(0) * 1000; } -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (clk) { - spin_lock_irqsave(&clocks_lock, flags); - if (clk->enabled++ == 0) - clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - } - - return 0; -} -EXPORT_SYMBOL(clk_enable); +static const struct clk_ops clk_mpll_ops = { + .recalc_rate = clk_mpll_recalc_rate, +}; -void clk_disable(struct clk *clk) -{ - unsigned long flags; +static const char * const clk_mpll_parents[] = { + "clk3686400", +}; - if (clk) { - WARN_ON(clk->enabled == 0); - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->enabled == 0) - clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - } -} -EXPORT_SYMBOL(clk_disable); +static const struct clk_init_data clk_mpll_init_data __initconst = { + .name = "mpll", + .ops = &clk_mpll_ops, + .parent_names = clk_mpll_parents, + .num_parents = ARRAY_SIZE(clk_mpll_parents), + .flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL, +}; -unsigned long clk_get_rate(struct clk *clk) +int __init sa11xx_clk_init(void) { - if (clk && clk->ops && clk->ops->get_rate) - return clk->ops->get_rate(clk); - - return 0; -} -EXPORT_SYMBOL(clk_get_rate); + struct clk_hw *hw; + int ret; -const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, -}; + hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768); + if (IS_ERR(hw)) + return PTR_ERR(hw); -const struct clkops clk_cpu_ops = { - .enable = clk_cpu_enable, - .disable = clk_cpu_disable, - .get_rate = clk_cpu_get_rate, -}; + clk_hw_register_clkdev(hw, NULL, "sa1100-rtc"); -static DEFINE_CLK(gpio27, &clk_gpio27_ops); + hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400); + if (IS_ERR(hw)) + return PTR_ERR(hw); -static DEFINE_CLK(cpu, &clk_cpu_ops); + clk_hw_register_clkdev(hw, "OSTIMER0", NULL); -static unsigned long clk_36864_get_rate(struct clk *clk) -{ - return 3686400; -} + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + hw->init = &clk_mpll_init_data; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(hw); + return ret; + } -static struct clkops clk_36864_ops = { - .enable = clk_cpu_enable, - .disable = clk_cpu_disable, - .get_rate = clk_36864_get_rate, -}; + clk_hw_register_clkdev(hw, NULL, "sa11x0-fb"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1"); + clk_hw_register_clkdev(hw, NULL, "1800"); + + hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents, + ARRAY_SIZE(clk_tucr_parents), 0, + (void __iomem *)&TUCR, FShft(TUCR_TSEL), + FAlnMsk(TUCR_TSEL), 0, &tucr_lock); + clk_set_rate(hw->clk, 3686400); + + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + hw->init = &clk_gpio27_init_data; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(hw); + return ret; + } -static DEFINE_CLK(36864, &clk_36864_ops); - -static struct clk_lookup sa11xx_clkregs[] = { - CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27), - CLKDEV_INIT("sa1100-rtc", NULL, NULL), - CLKDEV_INIT("sa11x0-fb", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia.0", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia.1", NULL, &clk_cpu), - /* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */ - CLKDEV_INIT("1800", NULL, &clk_cpu), - CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864), -}; + clk_hw_register_clkdev(hw, NULL, "sa1111.0"); -int __init sa11xx_clk_init(void) -{ - clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); return 0; } diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index e93e3a1d60d5..d685f03f51f3 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -83,57 +83,6 @@ static struct resource h3xxx_flash_resource = /* * H3xxx uart support */ -static struct gpio h3xxx_uart_gpio[] = { - { H3XXX_GPIO_COM_DCD, GPIOF_IN, "COM DCD" }, - { H3XXX_GPIO_COM_CTS, GPIOF_IN, "COM CTS" }, - { H3XXX_GPIO_COM_RTS, GPIOF_OUT_INIT_LOW, "COM RTS" }, -}; - -static bool h3xxx_uart_request_gpios(void) -{ - static bool h3xxx_uart_gpio_ok; - int rc; - - if (h3xxx_uart_gpio_ok) - return true; - - rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio)); - if (rc) - pr_err("h3xxx_uart_request_gpios: error %d\n", rc); - else - h3xxx_uart_gpio_ok = true; - - return h3xxx_uart_gpio_ok; -} - -static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl) -{ - if (port->mapbase == _Ser3UTCR0) { - if (!h3xxx_uart_request_gpios()) - return; - gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS)); - } -} - -static u_int h3xxx_uart_get_mctrl(struct uart_port *port) -{ - u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - - if (port->mapbase == _Ser3UTCR0) { - if (!h3xxx_uart_request_gpios()) - return ret; - /* - * DCD and CTS bits are inverted in GPLR by RS232 transceiver - */ - if (gpio_get_value(H3XXX_GPIO_COM_DCD)) - ret &= ~TIOCM_CD; - if (gpio_get_value(H3XXX_GPIO_COM_CTS)) - ret &= ~TIOCM_CTS; - } - - return ret; -} - static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate) { if (port->mapbase == _Ser3UTCR0) { @@ -166,12 +115,20 @@ static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable) } static struct sa1100_port_fns h3xxx_port_fns __initdata = { - .set_mctrl = h3xxx_uart_set_mctrl, - .get_mctrl = h3xxx_uart_get_mctrl, .pm = h3xxx_uart_pm, .set_wake = h3xxx_uart_set_wake, }; +static struct gpiod_lookup_table h3xxx_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW), + { }, + }, +}; + /* * EGPIO */ @@ -279,6 +236,7 @@ static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = { void __init h3xxx_mach_init(void) { gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table); + gpiod_add_lookup_table(&h3xxx_uart3_gpio_table); sa1100_register_uart_fns(&h3xxx_port_fns); sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1); platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices)); diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 4f4c1bb890e0..6d37d263e0d2 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -45,8 +45,6 @@ /* init funcs */ static void __init hackkit_map_io(void); -static u_int hackkit_get_mctrl(struct uart_port *port); -static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl); static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate); /********************************************************************** @@ -67,8 +65,6 @@ static struct map_desc hackkit_io_desc[] __initdata = { }; static struct sa1100_port_fns hackkit_port_fns __initdata = { - .set_mctrl = hackkit_set_mctrl, - .get_mctrl = hackkit_get_mctrl, .pm = hackkit_uart_pm, }; @@ -101,50 +97,6 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate) /* TODO: switch on/off uart in powersave mode */ } -/* - * Note! this can be called from IRQ context. - * FIXME: No modem ctrl lines yet. - */ -static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl) -{ -#if 0 - if (port->mapbase == _Ser1UTCR0) { - u_int set = 0, clear = 0; - - if (mctrl & TIOCM_RTS) - set |= PT_CTRL2_RS1_RTS; - else - clear |= PT_CTRL2_RS1_RTS; - - if (mctrl & TIOCM_DTR) - set |= PT_CTRL2_RS1_DTR; - else - clear |= PT_CTRL2_RS1_DTR; - - PTCTRL2_clear(clear); - PTCTRL2_set(set); - } -#endif -} - -static u_int hackkit_get_mctrl(struct uart_port *port) -{ - u_int ret = 0; -#if 0 - u_int irqsr = PT_IRQSR; - - /* need 2 reads to read current value */ - irqsr = PT_IRQSR; - - /* TODO: check IRQ source register for modem/com - status lines and set them correctly. */ -#endif - - ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - - return ret; -} - static struct mtd_partition hackkit_partitions[] = { { .name = "BLOB", diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index a671e4c994cf..6876bc1e33b4 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -11,7 +11,6 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/serial_core.h> @@ -49,23 +48,8 @@ #define IRR_SA1111 (1 << 2) #define NCR_NGPIO 7 - -#define MDM_CTL0_RTS1 (1 << 0) -#define MDM_CTL0_DTR1 (1 << 1) -#define MDM_CTL0_RTS2 (1 << 2) -#define MDM_CTL0_DTR2 (1 << 3) #define MDM_CTL0_NGPIO 4 - -#define MDM_CTL1_CTS1 (1 << 0) -#define MDM_CTL1_DSR1 (1 << 1) -#define MDM_CTL1_DCD1 (1 << 2) -#define MDM_CTL1_CTS2 (1 << 3) -#define MDM_CTL1_DSR2 (1 << 4) -#define MDM_CTL1_DCD2 (1 << 5) #define MDM_CTL1_NGPIO 6 - -#define AUD_SEL_1341 (1 << 0) -#define AUD_MUTE_1341 (1 << 1) #define AUD_NGPIO 2 extern void sa1110_mb_disable(void); @@ -97,6 +81,30 @@ struct neponset_drvdata { struct gpio_chip *gpio[4]; }; +static struct gpiod_lookup_table neponset_uart1_gpio_table = { + .dev_id = "sa11x0-uart.1", + .table = { + GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table neponset_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct gpiod_lookup_table neponset_pcmcia_table = { .dev_id = "1800", .table = { @@ -124,69 +132,6 @@ void neponset_ncr_frob(unsigned int mask, unsigned int val) } EXPORT_SYMBOL(neponset_ncr_frob); -static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) -{ - struct neponset_drvdata *n = nep; - unsigned long mask, val = 0; - - if (!n) - return; - - if (port->mapbase == _Ser1UTCR0) { - mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2; - - if (!(mctrl & TIOCM_RTS)) - val |= MDM_CTL0_RTS2; - - if (!(mctrl & TIOCM_DTR)) - val |= MDM_CTL0_DTR2; - } else if (port->mapbase == _Ser3UTCR0) { - mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1; - - if (!(mctrl & TIOCM_RTS)) - val |= MDM_CTL0_RTS1; - - if (!(mctrl & TIOCM_DTR)) - val |= MDM_CTL0_DTR1; - } - - n->gpio[1]->set_multiple(n->gpio[1], &mask, &val); -} - -static u_int neponset_get_mctrl(struct uart_port *port) -{ - void __iomem *base = nep->base; - u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - u_int mdm_ctl1; - - if (!base) - return ret; - - mdm_ctl1 = readb_relaxed(base + MDM_CTL_1); - if (port->mapbase == _Ser1UTCR0) { - if (mdm_ctl1 & MDM_CTL1_DCD2) - ret &= ~TIOCM_CD; - if (mdm_ctl1 & MDM_CTL1_CTS2) - ret &= ~TIOCM_CTS; - if (mdm_ctl1 & MDM_CTL1_DSR2) - ret &= ~TIOCM_DSR; - } else if (port->mapbase == _Ser3UTCR0) { - if (mdm_ctl1 & MDM_CTL1_DCD1) - ret &= ~TIOCM_CD; - if (mdm_ctl1 & MDM_CTL1_CTS1) - ret &= ~TIOCM_CTS; - if (mdm_ctl1 & MDM_CTL1_DSR1) - ret &= ~TIOCM_DSR; - } - - return ret; -} - -static struct sa1100_port_fns neponset_port_fns = { - .set_mctrl = neponset_set_mctrl, - .get_mctrl = neponset_get_mctrl, -}; - /* * Install handler for Neponset IRQ. Note that we have to loop here * since the ETHERNET and USAR IRQs are level based, and we need to @@ -388,6 +333,8 @@ static int neponset_probe(struct platform_device *dev) d->base + AUD_CTL, AUD_NGPIO, false, neponset_aud_names); + gpiod_add_lookup_table(&neponset_uart1_gpio_table); + gpiod_add_lookup_table(&neponset_uart3_gpio_table); gpiod_add_lookup_table(&neponset_pcmcia_table); /* @@ -402,8 +349,6 @@ static int neponset_probe(struct platform_device *dev) d->irq_base, d->irq_base + NEP_IRQ_NR - 1); nep = d; - sa1100_register_uart_fns(&neponset_port_fns); - /* Ensure that the memory bus request/grant signals are setup */ sa1110_mb_disable(); @@ -442,6 +387,8 @@ static int neponset_remove(struct platform_device *dev) platform_device_unregister(d->smc91x); gpiod_remove_lookup_table(&neponset_pcmcia_table); + gpiod_remove_lookup_table(&neponset_uart3_gpio_table); + gpiod_remove_lookup_table(&neponset_uart1_gpio_table); irq_set_chained_handler(irq, NULL); irq_free_descs(d->irq_base, NEP_IRQ_NR); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index eea60b20c6b4..9e4bc1865f84 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -17,6 +17,7 @@ #include <linux/of.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> +#include <linux/psci.h> #include <asm/mach/arch.h> #include <asm/secure_cntvoff.h> #include "common.h" @@ -60,9 +61,24 @@ static unsigned int __init get_extal_freq(void) void __init rcar_gen2_timer_init(void) { + bool need_update = true; void __iomem *base; u32 freq; + /* + * If PSCI is available then most likely we are running on PSCI-enabled + * U-Boot which, we assume, has already taken care of resetting CNTVOFF + * and updating counter module before switching to non-secure mode + * and we don't need to. + */ +#ifdef CONFIG_ARM_PSCI_FW + if (psci_ops.cpu_on) + need_update = false; +#endif + + if (need_update == false) + goto skip_update; + secure_cntvoff_init(); if (of_machine_is_compatible("renesas,r8a7745") || @@ -102,6 +118,7 @@ void __init rcar_gen2_timer_init(void) iounmap(base); +skip_update: of_clk_init(NULL); timer_probe(); } diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 05d6b5aada80..57699bd8f107 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_STM32 - bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7 + bool "STMicroelectronics STM32 family" + depends on ARM_SINGLE_ARMV7M || ARCH_MULTI_V7 select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select ARM_GIC if ARCH_MULTI_V7 diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile index da6c633d3cc0..97cd04508fa1 100644 --- a/arch/arm/mach-tango/Makefile +++ b/arch/arm/mach-tango/Makefile @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec) - obj-y += setup.o smc.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S index 361a8dc89804..b1752aaa72bc 100644 --- a/arch/arm/mach-tango/smc.S +++ b/arch/arm/mach-tango/smc.S @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ #include <linux/linkage.h> + .arch armv7-a + .arch_extension sec ENTRY(tango_smc) push {lr} mov ip, r1 diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 0b763239c0f8..c00ea4f77af6 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -16,8 +16,6 @@ #include <linux/of_platform.h> #include <linux/slab.h> #include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/platform_data/video-clcd-versatile.h> #include <linux/amba/mmci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -34,14 +32,12 @@ */ #define VERSATILE_SYS_PCICTL_OFFSET 0x44 #define VERSATILE_SYS_MCI_OFFSET 0x48 -#define VERSATILE_SYS_CLCD_OFFSET 0x50 /* * VERSATILE peripheral addresses */ #define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */ #define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */ -#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ #define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */ #define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) @@ -84,158 +80,6 @@ static struct mmci_platform_data mmc1_plat_data = { }; /* - * CLCD support. - */ -#define SYS_CLCD_MODE_MASK (3 << 0) -#define SYS_CLCD_MODE_888 (0 << 0) -#define SYS_CLCD_MODE_5551 (1 << 0) -#define SYS_CLCD_MODE_565_RLSB (2 << 0) -#define SYS_CLCD_MODE_565_BLSB (3 << 0) -#define SYS_CLCD_NLCDIOON (1 << 2) -#define SYS_CLCD_VDDPOSSWITCH (1 << 3) -#define SYS_CLCD_PWR3V5SWITCH (1 << 4) -#define SYS_CLCD_ID_MASK (0x1f << 8) -#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) -#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) -#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) -#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) -#define SYS_CLCD_ID_VGA (0x1f << 8) - -static bool is_sanyo_2_5_lcd; - -/* - * Disable all display connectors on the interface module. - */ -static void versatile_clcd_disable(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); - - /* - * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off - */ - if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) { - unsigned long ctrl; - - ctrl = readl(versatile_ib2_ctrl); - ctrl &= ~0x01; - writel(ctrl, versatile_ib2_ctrl); - } -} - -/* - * Enable the relevant connector on the interface module. - */ -static void versatile_clcd_enable(struct clcd_fb *fb) -{ - struct fb_var_screeninfo *var = &fb->fb.var; - void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_MODE_MASK; - - switch (var->green.length) { - case 5: - val |= SYS_CLCD_MODE_5551; - break; - case 6: - if (var->red.offset == 0) - val |= SYS_CLCD_MODE_565_RLSB; - else - val |= SYS_CLCD_MODE_565_BLSB; - break; - case 8: - val |= SYS_CLCD_MODE_888; - break; - } - - /* - * Set the MUX - */ - writel(val, sys_clcd); - - /* - * And now enable the PSUs - */ - val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); - - /* - * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on - */ - if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) { - unsigned long ctrl; - - ctrl = readl(versatile_ib2_ctrl); - ctrl |= 0x01; - writel(ctrl, versatile_ib2_ctrl); - } -} - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static int versatile_clcd_setup(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; - const char *panel_name; - u32 val; - - is_sanyo_2_5_lcd = false; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel_name = "Sanyo TM38QV67A02A"; - else if (val == SYS_CLCD_ID_SANYO_2_5) { - panel_name = "Sanyo QVGA Portrait"; - is_sanyo_2_5_lcd = true; - } else if (val == SYS_CLCD_ID_EPSON_2_2) - panel_name = "Epson L2F50113T00"; - else if (val == SYS_CLCD_ID_VGA) - panel_name = "VGA"; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel_name = "VGA"; - } - - fb->panel = versatile_clcd_get_panel(panel_name); - if (!fb->panel) - return -EINVAL; - - return versatile_clcd_setup_dma(fb, SZ_1M); -} - -static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) -{ - clcdfb_decode(fb, regs); - - /* Always clear BGR for RGB565: we do the routing externally */ - if (fb->fb.var.green.length == 6) - regs->cntl &= ~CNTL_BGR; -} - -static struct clcd_board clcd_plat_data = { - .name = "Versatile", - .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, - .check = clcdfb_check, - .decode = versatile_clcd_decode, - .disable = versatile_clcd_disable, - .enable = versatile_clcd_enable, - .setup = versatile_clcd_setup, - .mmap = versatile_clcd_mmap_dma, - .remove = versatile_clcd_remove_dma, -}; - -/* * Lookup table for attaching a specific name and platform_data pointer to * devices as they get created by of_platform_populate(). Ideally this table * would not exist, but the current clock implementation depends on some devices @@ -244,7 +88,6 @@ static struct clcd_board clcd_plat_data = { struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data), OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data), {} }; @@ -299,12 +142,12 @@ static void __init versatile_dt_pci_init(void) * driver had it so we will keep it. */ writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); - return; + goto out_put_node; } newprop = kzalloc(sizeof(*newprop), GFP_KERNEL); if (!newprop) - return; + goto out_put_node; newprop->name = kstrdup("status", GFP_KERNEL); newprop->value = kstrdup("disabled", GFP_KERNEL); @@ -312,6 +155,9 @@ static void __init versatile_dt_pci_init(void) of_update_property(np, newprop); pr_info("Not plugged into PCI backplane!\n"); + +out_put_node: + of_node_put(np); } static void __init versatile_dt_init(void) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index d07fc063c930..4778c775de1b 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -66,8 +66,11 @@ config ARCH_BITMAIN config ARCH_BRCMSTB bool "Broadcom Set-Top-Box SoCs" + select ARCH_HAS_RESET_CONTROLLER + select BCM7038_L1_IRQ select BRCMSTB_L2_IRQ select GENERIC_IRQ_CHIP + select PINCTRL help This enables support for Broadcom's ARMv8 Set Top Box SoCs diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig index 68bfca6f20dd..2bbf49e5d441 100644 --- a/drivers/soc/renesas/Kconfig +++ b/drivers/soc/renesas/Kconfig @@ -57,14 +57,16 @@ config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" select PM select PM_GENERIC_DOMAINS - select SYS_SUPPORTS_SH_MTU2 select RENESAS_OSTM + select RENESAS_RZA1_IRQC + select SYS_SUPPORTS_SH_MTU2 config ARCH_R7S9210 bool "RZ/A2 (R7S9210)" select PM select PM_GENERIC_DOMAINS select RENESAS_OSTM + select RENESAS_RZA1_IRQC config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c index fc5802ccb1c0..bb77c220b6f8 100644 --- a/drivers/soc/ti/pm33xx.c +++ b/drivers/soc/ti/pm33xx.c @@ -178,6 +178,7 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state) suspend_wfi_flags); suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY; + dev_info(pm33xx_dev, "Entering RTC Only mode with DDR in self-refresh\n"); if (!ret) { clk_restore_context(); diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 04c23951b831..fd385c8c53a5 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -497,6 +497,7 @@ config SERIAL_SA1100 bool "SA1100 serial port support" depends on ARCH_SA1100 select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB help If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you can enable its onboard serial port by enabling this option. diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index a399772be3fc..8e618129e65c 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -28,6 +28,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include "serial_mctrl_gpio.h" + /* We've been assigned a range on the "Low-density serial ports" major */ #define SERIAL_SA1100_MAJOR 204 #define MINOR_START 5 @@ -77,6 +79,7 @@ struct sa1100_port { struct uart_port port; struct timer_list timer; unsigned int old_status; + struct mctrl_gpios *gpios; }; /* @@ -174,6 +177,8 @@ static void sa1100_enable_ms(struct uart_port *port) container_of(port, struct sa1100_port, port); mod_timer(&sport->timer, jiffies); + + mctrl_gpio_enable_ms(sport->gpios); } static void @@ -322,11 +327,21 @@ static unsigned int sa1100_tx_empty(struct uart_port *port) static unsigned int sa1100_get_mctrl(struct uart_port *port) { - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + mctrl_gpio_get(sport->gpios, &ret); + + return ret; } static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl) { + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + mctrl_gpio_set(sport->gpios, mctrl); } /* @@ -842,6 +857,31 @@ static int sa1100_serial_resume(struct platform_device *dev) return 0; } +static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev) +{ + sport->port.dev = &dev->dev; + + // mctrl_gpio_init() requires that the GPIO driver supports interrupts, + // but we need to support GPIO drivers for hardware that has no such + // interrupts. Use mctrl_gpio_init_noauto() instead. + sport->gpios = mctrl_gpio_init_noauto(sport->port.dev, 0); + if (IS_ERR(sport->gpios)) { + int err = PTR_ERR(sport->gpios); + + dev_err(sport->port.dev, "failed to get mctrl gpios: %d\n", + err); + + if (err == -EPROBE_DEFER) + return err; + + sport->gpios = NULL; + } + + platform_set_drvdata(dev, sport); + + return uart_add_one_port(&sa1100_reg, &sport->port); +} + static int sa1100_serial_probe(struct platform_device *dev) { struct resource *res = dev->resource; @@ -856,9 +896,7 @@ static int sa1100_serial_probe(struct platform_device *dev) if (sa1100_ports[i].port.mapbase != res->start) continue; - sa1100_ports[i].port.dev = &dev->dev; - uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port); - platform_set_drvdata(dev, &sa1100_ports[i]); + sa1100_serial_add_one_port(&sa1100_ports[i], dev); break; } } diff --git a/include/linux/platform_data/video-clcd-versatile.h b/include/linux/platform_data/video-clcd-versatile.h deleted file mode 100644 index 305ebaec3afd..000000000000 --- a/include/linux/platform_data/video-clcd-versatile.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef PLAT_CLCD_H -#define PLAT_CLCD_H - -#ifdef CONFIG_PLAT_VERSATILE_CLCD -struct clcd_panel *versatile_clcd_get_panel(const char *); -int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); -int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); -void versatile_clcd_remove_dma(struct clcd_fb *); -#else -static inline struct clcd_panel *versatile_clcd_get_panel(const char *s) -{ - return NULL; -} -static inline int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) -{ - return -ENODEV; -} -static inline int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vm) -{ - return -ENODEV; -} -static inline void versatile_clcd_remove_dma(struct clcd_fb *fb) -{ -} -#endif - -#endif |