diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-06-03 11:08:40 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-06-03 11:08:40 -0700 |
| commit | 932c2989b59008e530ffcc7c7e6ef507a28b28ca (patch) | |
| tree | 5d51787f2ace2b9a2fd2393662818fd14aa219be | |
| parent | 4ad680f083ec360e0991c453e18a38ed9ae500d7 (diff) | |
| parent | 25e02ba60f0fbe65ba07553b5b2b8867726273c4 (diff) | |
Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed change that
goes a long way to making things simpler for all of the different
arches
- tty documentation cleanups and movements to their own place in the
documentation tree
- old tty driver cleanups and fixes from Jiri to bring some existing
drivers into the modern world
- RS485 cleanups and unifications to make it easier for individual
drivers to support this mode instead of having to duplicate logic
in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues"
* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
tty: Rework receive flow control char logic
pcmcia: synclink_cs: Don't allow CS5-6
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: uartlite: Fix BRKINT clearing
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
serial: msm_serial: disable interrupts in __msm_console_write()
serial: meson: acquire port->lock in startup()
serial: 8250_dw: Use dev_err_probe()
serial: 8250_dw: Use devm_add_action_or_reset()
...
114 files changed, 3164 insertions, 2451 deletions
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index ff364bd0fbac..30eaa62e1aed 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -23,7 +23,9 @@ properties: - fsl,imx8qxp-lpuart - fsl,imxrt1050-lpuart - items: - - const: fsl,imx8ulp-lpuart + - enum: + - fsl,imx93-lpuart + - fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart - items: - enum: diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml new file mode 100644 index 000000000000..05a6999808d1 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Geni based QUP UART interface + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +allOf: + - $ref: /schemas/serial/serial.yaml# + +properties: + compatible: + enum: + - qcom,geni-uart + - qcom,geni-debug-uart + + clocks: + maxItems: 1 + + clock-names: + const: se + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + + interrupts: + minItems: 1 + items: + - description: UART core irq + - description: Wakeup irq (RX GPIO) + + operating-points-v2: true + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interconnect/qcom,sc7180.h> + + serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0xa88000 0x7000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + }; +... diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml index e98ec48fee46..b25aca733b72 100644 --- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml @@ -9,12 +9,16 @@ title: Renesas EMMA Mobile UART Interface maintainers: - Magnus Damm <magnus.damm@gmail.com> -allOf: - - $ref: serial.yaml# - properties: compatible: - const: renesas,em-uart + oneOf: + - items: + - enum: + - renesas,r9a09g011-uart # RZ/V2M + - const: renesas,em-uart # generic EMMA Mobile compatible UART + + - items: + - const: renesas,em-uart # generic EMMA Mobile compatible UART reg: maxItems: 1 @@ -23,10 +27,31 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + items: + - description: UART functional clock + - description: Internal clock to access the registers clock-names: - const: sclk + minItems: 1 + items: + - const: sclk + - const: pclk + +allOf: + - $ref: serial.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,r9a09g011-uart + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index ee9804cd49bb..87180d95cd4c 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -51,10 +51,16 @@ properties: - renesas,hscif-r8a77980 # R-Car V3H - renesas,hscif-r8a77990 # R-Car E3 - renesas,hscif-r8a77995 # R-Car D3 - - renesas,hscif-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2 - const: renesas,hscif # generic HSCIF compatible UART + - items: + - enum: + - renesas,hscif-r8a779a0 # R-Car V3U + - renesas,hscif-r8a779g0 # R-Car V4H + - const: renesas,rcar-gen4-hscif # R-Car Gen4 + - const: renesas,hscif # generic HSCIF compatible UART + reg: maxItems: 1 @@ -113,6 +119,7 @@ if: enum: - renesas,rcar-gen2-hscif - renesas,rcar-gen3-hscif + - renesas,rcar-gen4-hscif then: required: - resets diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 5d37f8f189fb..90fe45265fbc 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -60,12 +60,12 @@ properties: - renesas,scif-r8a77980 # R-Car V3H - renesas,scif-r8a77990 # R-Car E3 - renesas,scif-r8a77995 # R-Car D3 - - renesas,scif-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2 - const: renesas,scif # generic SCIF compatible UART - items: - enum: + - renesas,scif-r8a779a0 # R-Car V3U - renesas,scif-r8a779f0 # R-Car S4-8 - const: renesas,rcar-gen4-scif # R-Car Gen4 - const: renesas,scif # generic SCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index 0c9fa694f85c..f2c9c9fe6aa7 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -33,6 +33,11 @@ properties: description: drive RTS low when sending (default is high). $ref: /schemas/types.yaml#/definitions/flag + rs485-rx-active-high: + description: Polarity of receiver enable signal (when separate from RTS). + True indicates active high (default is low). + $ref: /schemas/types.yaml#/definitions/flag + linux,rs485-enabled-at-boot-time: description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl. diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml index d490c7c4b967..3d01cc355778 100644 --- a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml +++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml @@ -20,7 +20,10 @@ properties: maxItems: 1 clocks: - minItems: 1 + maxItems: 1 + + resets: + maxItems: 1 auto-flow-control: description: enable automatic flow control support. diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index a7b0223e2886..d76a60d95b58 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -101,6 +101,7 @@ available subsections can be seen below. surface_aggregator/index switchtec sync_file + tty/index vfio-mediated-device vfio vfio-pci-device-specific-driver-acceptance diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst index 06ec04ba086f..7ef83fd3917b 100644 --- a/Documentation/driver-api/serial/driver.rst +++ b/Documentation/driver-api/serial/driver.rst @@ -311,7 +311,7 @@ hardware. This call must not sleep set_ldisc(port,termios) - Notifier for discipline change. See Documentation/tty/tty_ldisc.rst. + Notifier for discipline change. See ../tty/tty_ldisc.rst. Locking: caller holds tty_port->mutex diff --git a/Documentation/driver-api/serial/index.rst b/Documentation/driver-api/serial/index.rst index 7eb21a695fc3..03a55b987a1d 100644 --- a/Documentation/driver-api/serial/index.rst +++ b/Documentation/driver-api/serial/index.rst @@ -16,8 +16,6 @@ Serial drivers .. toctree:: :maxdepth: 1 - moxa-smartio - n_gsm serial-iso7816 serial-rs485 diff --git a/Documentation/driver-api/serial/n_gsm.rst b/Documentation/driver-api/serial/n_gsm.rst deleted file mode 100644 index 49956509ad73..000000000000 --- a/Documentation/driver-api/serial/n_gsm.rst +++ /dev/null @@ -1,159 +0,0 @@ -============================== -GSM 0710 tty multiplexor HOWTO -============================== - -This line discipline implements the GSM 07.10 multiplexing protocol -detailed in the following 3GPP document: - - https://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip - -This document give some hints on how to use this driver with GPRS and 3G -modems connected to a physical serial port. - -How to use it -------------- -1. config initiator -^^^^^^^^^^^^^^^^^^^^^ - -1.1 initialize the modem in 0710 mux mode (usually AT+CMUX= command) through - its serial port. Depending on the modem used, you can pass more or less - parameters to this command. - -1.2 switch the serial line to using the n_gsm line discipline by using - TIOCSETD ioctl. - -1.3 configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl. - -1.4 obtain base gsmtty number for the used serial port. - -Major parts of the initialization program : -(a good starting point is util-linux-ng/sys-utils/ldattach.c):: - - #include <stdio.h> - #include <stdint.h> - #include <linux/gsmmux.h> - #include <linux/tty.h> - #define DEFAULT_SPEED B115200 - #define SERIAL_PORT /dev/ttyS0 - - int ldisc = N_GSM0710; - struct gsm_config c; - struct termios configuration; - uint32_t first; - - /* open the serial port connected to the modem */ - fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY); - - /* configure the serial port : speed, flow control ... */ - - /* send the AT commands to switch the modem to CMUX mode - and check that it's successful (should return OK) */ - write(fd, "AT+CMUX=0\r", 10); - - /* experience showed that some modems need some time before - being able to answer to the first MUX packet so a delay - may be needed here in some case */ - sleep(3); - - /* use n_gsm line discipline */ - ioctl(fd, TIOCSETD, &ldisc); - - /* get n_gsm configuration */ - ioctl(fd, GSMIOC_GETCONF, &c); - /* we are initiator and need encoding 0 (basic) */ - c.initiator = 1; - c.encapsulation = 0; - /* our modem defaults to a maximum size of 127 bytes */ - c.mru = 127; - c.mtu = 127; - /* set the new configuration */ - ioctl(fd, GSMIOC_SETCONF, &c); - /* get first gsmtty device node */ - ioctl(fd, GSMIOC_GETFIRST, &first); - printf("first muxed line: /dev/gsmtty%i\n", first); - - /* and wait for ever to keep the line discipline enabled */ - daemon(0,0); - pause(); - -1.5 use these devices as plain serial ports. - - for example, it's possible: - - - and to use gnokii to send / receive SMS on ttygsm1 - - to use ppp to establish a datalink on ttygsm2 - -1.6 first close all virtual ports before closing the physical port. - - Note that after closing the physical port the modem is still in multiplexing - mode. This may prevent a successful re-opening of the port later. To avoid - this situation either reset the modem if your hardware allows that or send - a disconnect command frame manually before initializing the multiplexing mode - for the second time. The byte sequence for the disconnect command frame is:: - - 0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9. - -2. config requester -^^^^^^^^^^^^^^^^^^^^^ - -2.1 receive string "AT+CMUX= command" through its serial port,initialize - mux mode config - -2.2 switch the serial line to using the n_gsm line discipline by using - TIOCSETD ioctl. - -2.3 configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl. - -2.4 obtain base gsmtty number for the used serial port:: - - #include <stdio.h> - #include <stdint.h> - #include <linux/gsmmux.h> - #include <linux/tty.h> - #define DEFAULT_SPEED B115200 - #define SERIAL_PORT /dev/ttyS0 - - int ldisc = N_GSM0710; - struct gsm_config c; - struct termios configuration; - uint32_t first; - - /* open the serial port */ - fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY); - - /* configure the serial port : speed, flow control ... */ - - /* get serial data and check "AT+CMUX=command" parameter ... */ - - /* use n_gsm line discipline */ - ioctl(fd, TIOCSETD, &ldisc); - - /* get n_gsm configuration */ - ioctl(fd, GSMIOC_GETCONF, &c); - /* we are requester and need encoding 0 (basic) */ - c.initiator = 0; - c.encapsulation = 0; - /* our modem defaults to a maximum size of 127 bytes */ - c.mru = 127; - c.mtu = 127; - /* set the new configuration */ - ioctl(fd, GSMIOC_SETCONF, &c); - /* get first gsmtty device node */ - ioctl(fd, GSMIOC_GETFIRST, &first); - printf("first muxed line: /dev/gsmtty%i\n", first); - - /* and wait for ever to keep the line discipline enabled */ - daemon(0,0); - pause(); - -Additional Documentation ------------------------- -More practical details on the protocol and how it's supported by industrial -modems can be found in the following documents : - -- http://www.telit.com/module/infopool/download.php?id=616 -- http://www.u-blox.com/images/downloads/Product_Docs/LEON-G100-G200-MuxImplementation_ApplicationNote_%28GSM%20G1-CS-10002%29.pdf -- http://www.sierrawireless.com/Support/Downloads/AirPrime/WMP_Series/~/media/Support_Downloads/AirPrime/Application_notes/CMUX_Feature_Application_Note-Rev004.ashx -- http://wm.sim.com/sim/News/photo/2010721161442.pdf - -11-03-08 - Eric Bénard - <eric@eukrea.com> diff --git a/Documentation/tty/index.rst b/Documentation/driver-api/tty/index.rst index 21ea0cb21e55..2d32606a4278 100644 --- a/Documentation/tty/index.rst +++ b/Documentation/driver-api/tty/index.rst @@ -36,18 +36,16 @@ In-detail description of the named TTY structures is in separate documents: tty_struct tty_ldisc tty_buffer - n_tty tty_internals Writing TTY Driver ================== Before one starts writing a TTY driver, they must consider -:doc:`Serial <../driver-api/serial/driver>` and :doc:`USB Serial -<../usb/usb-serial>` layers -first. Drivers for serial devices can often use one of these specific layers to -implement a serial driver. Only special devices should be handled directly by -the TTY Layer. If you are about to write such a driver, read on. +:doc:`Serial <../serial/driver>` and :doc:`USB Serial <../../usb/usb-serial>` +layers first. Drivers for serial devices can often use one of these specific +layers to implement a serial driver. Only special devices should be handled +directly by the TTY Layer. If you are about to write such a driver, read on. A *typical* sequence a TTY driver performs is as follows: @@ -61,3 +59,15 @@ A *typical* sequence a TTY driver performs is as follows: Steps regarding driver, i.e. 1., 3., and 5. are described in detail in :doc:`tty_driver`. For the other two (devices handling), look into :doc:`tty_port`. + +Other Documentation +=================== + +Miscellaneous documentation can be further found in these documents: + +.. toctree:: + :maxdepth: 2 + + moxa-smartio + n_gsm + n_tty diff --git a/Documentation/driver-api/serial/moxa-smartio.rst b/Documentation/driver-api/tty/moxa-smartio.rst index af25bc5cc3e6..af25bc5cc3e6 100644 --- a/Documentation/driver-api/serial/moxa-smartio.rst +++ b/Documentation/driver-api/tty/moxa-smartio.rst diff --git a/Documentation/driver-api/tty/n_gsm.rst b/Documentation/driver-api/tty/n_gsm.rst new file mode 100644 index 000000000000..35d7381515b0 --- /dev/null +++ b/Documentation/driver-api/tty/n_gsm.rst @@ -0,0 +1,153 @@ +============================== +GSM 0710 tty multiplexor HOWTO +============================== + +.. contents:: :local: + +This line discipline implements the GSM 07.10 multiplexing protocol +detailed in the following 3GPP document: + + https://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip + +This document give some hints on how to use this driver with GPRS and 3G +modems connected to a physical serial port. + +How to use it +============= + +Config Initiator +---------------- + +#. Initialize the modem in 0710 mux mode (usually ``AT+CMUX=`` command) through + its serial port. Depending on the modem used, you can pass more or less + parameters to this command. + +#. Switch the serial line to using the n_gsm line discipline by using + ``TIOCSETD`` ioctl. + +#. Configure the mux using ``GSMIOC_GETCONF``/``GSMIOC_SETCONF`` ioctl. + +#. Obtain base gsmtty number for the used serial port. + + Major parts of the initialization program + (a good starting point is util-linux-ng/sys-utils/ldattach.c):: + + #include <stdio.h> + #include <stdint.h> + #include <linux/gsmmux.h> + #include <linux/tty.h> + + #define DEFAULT_SPEED B115200 + #define SERIAL_PORT /dev/ttyS0 + + int ldisc = N_GSM0710; + struct gsm_config c; + struct termios configuration; + uint32_t first; + + /* open the serial port connected to the modem */ + fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY); + + /* configure the serial port : speed, flow control ... */ + + /* send the AT commands to switch the modem to CMUX mode + and check that it's successful (should return OK) */ + write(fd, "AT+CMUX=0\r", 10); + + /* experience showed that some modems need some time before + being able to answer to the first MUX packet so a delay + may be needed here in some case */ + sleep(3); + + /* use n_gsm line discipline */ + ioctl(fd, TIOCSETD, &ldisc); + + /* get n_gsm configuration */ + ioctl(fd, GSMIOC_GETCONF, &c); + /* we are initiator and need encoding 0 (basic) */ + c.initiator = 1; + c.encapsulation = 0; + /* our modem defaults to a maximum size of 127 bytes */ + c.mru = 127; + c.mtu = 127; + /* set the new configuration */ + ioctl(fd, GSMIOC_SETCONF, &c); + /* get first gsmtty device node */ + ioctl(fd, GSMIOC_GETFIRST, &first); + printf("first muxed line: /dev/gsmtty%i\n", first); + + /* and wait for ever to keep the line discipline enabled */ + daemon(0,0); + pause(); + +#. Use these devices as plain serial ports. + + For example, it's possible: + + - to use *gnokii* to send / receive SMS on ``ttygsm1`` + - to use *ppp* to establish a datalink on ``ttygsm2`` + +#. First close all virtual ports before closing the physical port. + + Note that after closing the physical port the modem is still in multiplexing + mode. This may prevent a successful re-opening of the port later. To avoid + this situation either reset the modem if your hardware allows that or send + a disconnect command frame manually before initializing the multiplexing mode + for the second time. The byte sequence for the disconnect command frame is:: + + 0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9 + +Config Requester +---------------- + +#. Receive ``AT+CMUX=`` command through its serial port, initialize mux mode + config. + +#. Switch the serial line to using the *n_gsm* line discipline by using + ``TIOCSETD`` ioctl. + +#. Configure the mux using ``GSMIOC_GETCONF``/``GSMIOC_SETCONF`` ioctl. + +#. Obtain base gsmtty number for the used serial port:: + + #include <stdio.h> + #include <stdint.h> + #include <linux/gsmmux.h> + #include <linux/tty.h> + #define DEFAULT_SPEED B115200 + #define SERIAL_PORT /dev/ttyS0 + + int ldisc = N_GSM0710; + struct gsm_config c; + struct termios configuration; + uint32_t first; + + /* open the serial port */ + fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY); + + /* configure the serial port : speed, flow control ... */ + + /* get serial data and check "AT+CMUX=command" parameter ... */ + + /* use n_gsm line discipline */ + ioctl(fd, TIOCSETD, &ldisc); + + /* get n_gsm configuration */ + ioctl(fd, GSMIOC_GETCONF, &c); + /* we are requester and need encoding 0 (basic) */ + c.initiator = 0; + c.encapsulation = 0; + /* our modem defaults to a maximum size of 127 bytes */ + c.mru = 127; + c.mtu = 127; + /* set the new configuration */ + ioctl(fd, GSMIOC_SETCONF, &c); + /* get first gsmtty device node */ + ioctl(fd, GSMIOC_GETFIRST, &first); + printf("first muxed line: /dev/gsmtty%i\n", first); + + /* and wait for ever to keep the line discipline enabled */ + daemon(0,0); + pause(); + +11-03-08 - Eric Bénard - <eric@eukrea.com> diff --git a/Documentation/tty/n_tty.rst b/Documentation/driver-api/tty/n_tty.rst index 15b70faee72d..15b70faee72d 100644 --- a/Documentation/tty/n_tty.rst +++ b/Documentation/driver-api/tty/n_tty.rst diff --git a/Documentation/tty/tty_buffer.rst b/Documentation/driver-api/tty/tty_buffer.rst index a39d4781e0d2..a39d4781e0d2 100644 --- a/Documentation/tty/tty_buffer.rst +++ b/Documentation/driver-api/tty/tty_buffer.rst diff --git a/Documentation/tty/tty_driver.rst b/Documentation/driver-api/tty/tty_driver.rst index cc529f863406..cc529f863406 100644 --- a/Documentation/tty/tty_driver.rst +++ b/Documentation/driver-api/tty/tty_driver.rst diff --git a/Documentation/tty/tty_internals.rst b/Documentation/driver-api/tty/tty_internals.rst index d0d415820300..d0d415820300 100644 --- a/Documentation/tty/tty_internals.rst +++ b/Documentation/driver-api/tty/tty_internals.rst diff --git a/Documentation/tty/tty_ldisc.rst b/Documentation/driver-api/tty/tty_ldisc.rst index 5144751be804..5144751be804 100644 --- a/Documentation/tty/tty_ldisc.rst +++ b/Documentation/driver-api/tty/tty_ldisc.rst diff --git a/Documentation/tty/tty_port.rst b/Documentation/driver-api/tty/tty_port.rst index 5cb90e954fcf..5cb90e954fcf 100644 --- a/Documentation/tty/tty_port.rst +++ b/Documentation/driver-api/tty/tty_port.rst diff --git a/Documentation/tty/tty_struct.rst b/Documentation/driver-api/tty/tty_struct.rst index c72f5a4293b2..c72f5a4293b2 100644 --- a/Documentation/tty/tty_struct.rst +++ b/Documentation/driver-api/tty/tty_struct.rst diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst index 6b62425ef9cd..dbb03022b127 100644 --- a/Documentation/firmware-guide/acpi/enumeration.rst +++ b/Documentation/firmware-guide/acpi/enumeration.rst @@ -389,6 +389,31 @@ descriptors once the device is released. See Documentation/firmware-guide/acpi/gpio-properties.rst for more information about the _DSD binding related to GPIOs. +RS-485 support +============== + +ACPI _DSD (Device Specific Data) can be used to describe RS-485 capability +of UART. + +For example:: + + Device (DEV) + { + ... + + // ACPI 5.1 _DSD used for RS-485 capabilities + Name (_DSD, Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package () {"rs485-rts-active-low", Zero}, + Package () {"rs485-rx-active-high", Zero}, + Package () {"rs485-rx-during-tx", Zero}, + } + }) + ... + MFD devices =========== diff --git a/Documentation/index.rst b/Documentation/index.rst index 062cf88c2216..67036a05b771 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -136,7 +136,6 @@ needed). misc-devices/index scheduler/index mhi/index - tty/index peci/index Architecture-agnostic documentation diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst index 30ac58f81901..756be15a49a4 100644 --- a/Documentation/misc-devices/index.rst +++ b/Documentation/misc-devices/index.rst @@ -25,6 +25,7 @@ fit into other categories. isl29003 lis3lv02d max6875 + oxsemi-tornado pci-endpoint-test spear-pcie-gadget uacce diff --git a/Documentation/misc-devices/oxsemi-tornado.rst b/Documentation/misc-devices/oxsemi-tornado.rst new file mode 100644 index 000000000000..b33351bef6cf --- /dev/null +++ b/Documentation/misc-devices/oxsemi-tornado.rst @@ -0,0 +1,131 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================================================================== +Notes on Oxford Semiconductor PCIe (Tornado) 950 serial port devices +==================================================================== + +Oxford Semiconductor PCIe (Tornado) 950 serial port devices are driven +by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock. + +The baud rate produced by the baud generator is obtained from this input +frequency by dividing it by the clock prescaler, which can be set to any +value from 1 to 63.875 in increments of 0.125, and then the usual 16-bit +divisor is used as with the original 8250, to divide the frequency by a +value from 1 to 65535. Finally a programmable oversampling rate is used +that can take any value from 4 to 16 to divide the frequency further and +determine the actual baud rate used. Baud rates from 15625000bps down +to 0.933bps can be obtained this way. + +By default the oversampling rate is set to 16 and the clock prescaler is +set to 33.875, meaning that the frequency to be used as the reference +for the usual 16-bit divisor is 115313.653, which is close enough to the +frequency of 115200 used by the original 8250 for the same values to be +used for the divisor to obtain the requested baud rates by software that +is unaware of the extra clock controls available. + +The oversampling rate is programmed with the TCR register and the clock +prescaler is programmed with the CPR/CPR2 register pair [OX200]_ [OX952]_ +[OX954]_ [OX958]_. To switch away from the default value of 33.875 for +the prescaler the enhanced mode has to be explicitly enabled though, by +setting bit 4 of the EFR. In that mode setting bit 7 in the MCR enables +the prescaler or otherwise it is bypassed as if the value of 1 was used. +Additionally writing any value to CPR clears CPR2 for compatibility with +old software written for older conventional PCI Oxford Semiconductor +devices that do not have the extra prescaler's 9th bit in CPR2, so the +CPR/CPR2 register pair has to be programmed in the right order. + +By using these parameters rates from 15625000bps down to 1bps can be +obtained, with either exact or highly-accurate actual bit rates for +standard and many non-standard rates. + +Here are the figures for the standard and some non-standard baud rates +(including those quoted in Oxford Semiconductor documentation), giving +the requested rate (r), the actual rate yielded (a) and its deviation +from the requested rate (d), and the values of the oversampling rate +(tcr), the clock prescaler (cpr) and the divisor (div) produced by the +new ``get_divisor`` handler: + +:: + + r: 15625000, a: 15625000.00, d: 0.0000%, tcr: 4, cpr: 1.000, div: 1 + r: 12500000, a: 12500000.00, d: 0.0000%, tcr: 5, cpr: 1.000, div: 1 + r: 10416666, a: 10416666.67, d: 0.0000%, tcr: 6, cpr: 1.000, div: 1 + r: 8928571, a: 8928571.43, d: 0.0000%, tcr: 7, cpr: 1.000, div: 1 + r: 7812500, a: 7812500.00, d: 0.0000%, tcr: 8, cpr: 1.000, div: 1 + r: 4000000, a: 4000000.00, d: 0.0000%, tcr: 5, cpr: 3.125, div: 1 + r: 3686400, a: 3676470.59, d: -0.2694%, tcr: 8, cpr: 2.125, div: 1 + r: 3500000, a: 3496503.50, d: -0.0999%, tcr: 13, cpr: 1.375, div: 1 + r: 3000000, a: 2976190.48, d: -0.7937%, tcr: 14, cpr: 1.500, div: 1 + r: 2500000, a: 2500000.00, d: 0.0000%, tcr: 10, cpr: 2.500, div: 1 + r: 2000000, a: 2000000.00, d: 0.0000%, tcr: 10, cpr: 3.125, div: 1 + r: 1843200, a: 1838235.29, d: -0.2694%, tcr: 16, cpr: 2.125, div: 1 + r: 1500000, a: 1492537.31, d: -0.4975%, tcr: 5, cpr: 8.375, div: 1 + r: 1152000, a: 1152073.73, d: 0.0064%, tcr: 14, cpr: 3.875, div: 1 + r: 921600, a: 919117.65, d: -0.2694%, tcr: 16, cpr: 2.125, div: 2 + r: 576000, a: 576036.87, d: 0.0064%, tcr: 14, cpr: 3.875, div: 2 + r: 460800, a: 460829.49, d: 0.0064%, tcr: 7, cpr: 3.875, div: 5 + r: 230400, a: 230414.75, d: 0.0064%, tcr: 14, cpr: 3.875, div: 5 + r: 115200, a: 115207.37, d: 0.0064%, tcr: 14, cpr: 1.250, div: 31 + r: 57600, a: 57603.69, d: 0.0064%, tcr: 8, cpr: 3.875, div: 35 + r: 38400, a: 38402.46, d: 0.0064%, tcr: 14, cpr: 3.875, div: 30 + r: 19200, a: 19201.23, d: 0.0064%, tcr: 8, cpr: 3.875, div: 105 + r: 9600, a: 9600.06, d: 0.0006%, tcr: 9, cpr: 1.125, div: 643 + r: 4800, a: 4799.98, d: -0.0004%, tcr: 7, cpr: 2.875, div: 647 + r: 2400, a: 2400.02, d: 0.0008%, tcr: 9, cpr: 2.250, div: 1286 + r: 1200, a: 1200.00, d: 0.0000%, tcr: 14, cpr: 2.875, div: 1294 + r: 300, a: 300.00, d: 0.0000%, tcr: 11, cpr: 2.625, div: 7215 + r: 200, a: 200.00, d: 0.0000%, tcr: 16, cpr: 1.250, div: 15625 + r: 150, a: 150.00, d: 0.0000%, tcr: 13, cpr: 2.250, div: 14245 + r: 134, a: 134.00, d: 0.0000%, tcr: 11, cpr: 2.625, div: 16153 + r: 110, a: 110.00, d: 0.0000%, tcr: 12, cpr: 1.000, div: 47348 + r: 75, a: 75.00, d: 0.0000%, tcr: 4, cpr: 5.875, div: 35461 + r: 50, a: 50.00, d: 0.0000%, tcr: 16, cpr: 1.250, div: 62500 + r: 25, a: 25.00, d: 0.0000%, tcr: 16, cpr: 2.500, div: 62500 + r: 4, a: 4.00, d: 0.0000%, tcr: 16, cpr: 20.000, div: 48828 + r: 2, a: 2.00, d: 0.0000%, tcr: 16, cpr: 40.000, div: 48828 + r: 1, a: 1.00, d: 0.0000%, tcr: 16, cpr: 63.875, div: 61154 + +With the baud base set to 15625000 and the unsigned 16-bit UART_DIV_MAX +limitation imposed by ``serial8250_get_baud_rate`` standard baud rates +below 300bps become unavailable in the regular way, e.g. the rate of +200bps requires the baud base to be divided by 78125 and that is beyond +the unsigned 16-bit range. The historic spd_cust feature can still be +used by encoding the values for, the prescaler, the oversampling rate +and the clock divisor (DLM/DLL) as follows to obtain such rates if so +required: + +:: + + 31 29 28 20 19 16 15 0 + +-----+-----------------+-------+-------------------------------+ + |0 0 0| CPR2:CPR | TCR | DLM:DLL | + +-----+-----------------+-------+-------------------------------+ + +Use a value such encoded for the ``custom_divisor`` field along with the +ASYNC_SPD_CUST flag set in the ``flags`` field in ``struct serial_struct`` +passed with the TIOCSSERIAL ioctl(2), such as with the setserial(8) +utility and its ``divisor`` and ``spd_cust`` parameters, and then select +the baud rate of 38400bps. Note that the value of 0 in TCR sets the +oversampling rate to 16 and prescaler values below 1 in CPR2/CPR are +clamped by the driver to 1. + +For example the value of 0x1f4004e2 will set CPR2/CPR, TCR and DLM/DLL +respectively to 0x1f4, 0x0 and 0x04e2, choosing the prescaler value, +the oversampling rate and the clock divisor of 62.500, 16 and 1250 +respectively. These parameters will set the baud rate for the serial +port to 62500000 / 62.500 / 1250 / 16 = 50bps. + +Maciej W. Rozycki <macro@orcam.me.uk> + +.. [OX200] "OXPCIe200 PCI Express Multi-Port Bridge", Oxford Semiconductor, + Inc., DS-0045, 10 Nov 2008, Section "950 Mode", pp. 64-65 + +.. [OX952] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port", + Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Section "950 Mode", + p. 20 + +.. [OX954] "OXPCIe954 PCI Express Bridge to Quad Serial Port", Oxford + Semiconductor, Inc., DS-0047, Feb 08, Section "950 Mode", p. 20 + +.. [OX958] "OXPCIe958 PCI Express Bridge to Octal Serial Port", Oxford + Semiconductor, Inc., DS-0048, Feb 08, Section "950 Mode", p. 20 diff --git a/MAINTAINERS b/MAINTAINERS index b87c91203c52..22cb6669892e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13411,7 +13411,7 @@ F: drivers/net/phy/motorcomm.c MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD M: Jiri Slaby <jirislaby@kernel.org> S: Maintained -F: Documentation/driver-api/serial/moxa-smartio.rst +F: Documentation/driver-api/tty/moxa-smartio.rst F: drivers/tty/mxser.* MR800 AVERMEDIA USB FM RADIO DRIVER diff --git a/arch/alpha/include/uapi/asm/termbits.h b/arch/alpha/include/uapi/asm/termbits.h index 4575ba34a0ea..f1290b22072b 100644 --- a/arch/alpha/include/uapi/asm/termbits.h +++ b/arch/alpha/include/uapi/asm/termbits.h @@ -2,10 +2,8 @@ #ifndef _ALPHA_TERMBITS_H #define _ALPHA_TERMBITS_H -#include <linux/posix_types.h> +#include <asm-generic/termbits-common.h> -typedef unsigned char cc_t; -typedef unsigned int speed_t; typedef unsigned int tcflag_t; /* @@ -53,76 +51,58 @@ struct ktermios { }; /* c_cc characters */ -#define VEOF 0 -#define VEOL 1 -#define VEOL2 2 -#define VERASE 3 -#define VWERASE 4 -#define VKILL 5 -#define VREPRINT 6 -#define VSWTC 7 -#define VINTR 8 -#define VQUIT 9 -#define VSUSP 10 -#define VSTART 12 -#define VSTOP 13 -#define VLNEXT 14 -#define VDISCARD 15 -#define VMIN 16 -#define VTIME 17 +#define VEOF 0 +#define VEOL 1 +#define VEOL2 2 +#define VERASE 3 +#define VWERASE 4 +#define VKILL 5 +#define VREPRINT 6 +#define VSWTC 7 +#define VINTR 8 +#define VQUIT 9 +#define VSUSP 10 +#define VSTART 12 +#define VSTOP 13 +#define VLNEXT 14 +#define VDISCARD 15 +#define VMIN 16 +#define VTIME 17 /* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IXON 0001000 -#define IXOFF 0002000 -#define IXANY 0004000 -#define IUCLC 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 +#define IXON 0x0200 +#define IXOFF 0x0400 +#define IUCLC 0x1000 +#define IMAXBEL 0x2000 +#define IUTF8 0x4000 /* c_oflag bits */ -#define OPOST 0000001 -#define ONLCR 0000002 -#define OLCUC 0000004 - -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 - -#define OFILL 00000100 -#define OFDEL 00000200 -#define NLDLY 00001400 -#define NL0 00000000 -#define NL1 00000400 -#define NL2 00001000 -#define NL3 00001400 -#define TABDLY 00006000 -#define TAB0 00000000 -#define TAB1 00002000 -#define TAB2 00004000 -#define TAB3 00006000 -#define CRDLY 00030000 -#define CR0 00000000 -#define CR1 00010000 -#define CR2 00020000 -#define CR3 00030000 -#define FFDLY 00040000 -#define FF0 00000000 -#define FF1 00040000 -#define BSDLY 00100000 -#define BS0 00000000 -#define BS1 00100000 -#define VTDLY 00200000 -#define VT0 00000000 -#define VT1 00200000 +#define ONLCR 0x00002 +#define OLCUC 0x00004 +#define NLDLY 0x00300 +#define NL0 0x00000 +#define NL1 0x00100 +#define NL2 0x00200 +#define NL3 0x00300 +#define TABDLY 0x00c00 +#define TAB0 0x00000 +#define TAB1 0x00400 +#define TAB2 0x00800 +#define TAB3 0x00c00 +#define CRDLY 0x03000 +#define CR0 0x00000 +#define CR1 0x01000 +#define CR2 0x02000 +#define CR3 0x03000 +#define FFDLY 0x04000 +#define FF0 0x00000 +#define FF1 0x04000 +#define BSDLY 0x08000 +#define BS0 0x00000 +#define BS1 0x08000 +#define VTDLY 0x10000 +#define VT0 0x00000 +#define VT1 0x10000 /* * Should be equivalent to TAB3, see description of TAB3 in * POSIX.1-2008, Ch. 11.2.3 "Output Modes" @@ -130,61 +110,36 @@ struct ktermios { #define XTABS TAB3 /* c_cflag bit meaning */ -#define CBAUD 0000037 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CBAUDEX 0000000 -#define B57600 00020 -#define B115200 00021 -#define B230400 00022 -#define B460800 00023 -#define B500000 00024 -#define B576000 00025 -#define B921600 00026 -#define B1000000 00027 -#define B1152000 00030 -#define B1500000 00031 -#define B2000000 00032 -#define B2500000 00033 -#define B3000000 00034 -#define B3500000 00035 -#define B4000000 00036 -#define BOTHER 00037 - -#define CSIZE 00001400 -#define CS5 00000000 -#define CS6 00000400 -#define CS7 00001000 -#define CS8 00001400 - -#define CSTOPB 00002000 -#define CREAD 00004000 -#define PARENB 00010000 -#define PARODD 00020000 -#define HUPCL 00040000 - -#define CLOCAL 00100000 -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define CIBAUD 07600000 -#define IBSHIFT 16 +#define CBAUD 0x0000001f +#define CBAUDEX 0x00000000 +#define BOTHER 0x0000001f +#define B57600 0x00000010 +#define B115200 0x00000011 +#define B230400 0x00000012 +#define B460800 0x00000013 +#define B500000 0x00000014 +#define B576000 0x00000015 +#define B921600 0x00000016 +#define B1000000 0x00000017 +#define B1152000 0x00000018 +#define B1500000 0x00000019 +#define B2000000 0x0000001a +#define B2500000 0x0000001b +#define B3000000 0x0000001c +#define B3500000 0x0000001d +#define B4000000 0x0000001e +#define CSIZE 0x00000300 +#define CS5 0x00000000 +#define CS6 0x00000100 +#define CS7 0x00000200 +#define CS8 0x00000300 +#define CSTOPB 0x00000400 +#define CREAD 0x00000800 +#define PARENB 0x00001000 +#define PARODD 0x00002000 +#define HUPCL 0x00004000 +#define CLOCAL 0x00008000 +#define CIBAUD 0x001f0000 /* c_lflag bits */ #define ISIG 0x00000080 @@ -204,17 +159,6 @@ struct ktermios { #define IEXTEN 0x00000400 #define EXTPROC 0x10000000 -/* Values for the ACTION argument to `tcflow'. */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - /* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ #define TCSANOW 0 #define TCSADRAIN 1 diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h index dfeffba729b7..1eb60903d6f0 100644 --- a/arch/mips/include/uapi/asm/termbits.h +++ b/arch/mips/include/uapi/asm/termbits.h @@ -11,11 +11,9 @@ #ifndef _ASM_TERMBITS_H #define _ASM_TERMBITS_H -#include <linux/posix_types.h> +#include <asm-generic/termbits-common.h> -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; +typedef unsigned int tcflag_t; /* * The ABI says nothing about NCC but seems to use NCCS as @@ -54,175 +52,126 @@ struct ktermios { }; /* c_cc characters */ -#define VINTR 0 /* Interrupt character [ISIG]. */ -#define VQUIT 1 /* Quit character [ISIG]. */ -#define VERASE 2 /* Erase character [ICANON]. */ -#define VKILL 3 /* Kill-line character [ICANON]. */ -#define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */ -#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */ -#define VEOL2 6 /* Second EOL character [ICANON]. */ +#define VINTR 0 /* Interrupt character [ISIG] */ +#define VQUIT 1 /* Quit character [ISIG] */ +#define VERASE 2 /* Erase character [ICANON] */ +#define VKILL 3 /* Kill-line character [ICANON] */ +#define VMIN 4 /* Minimum number of bytes read at once [!ICANON] */ +#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON] */ +#define VEOL2 6 /* Second EOL character [ICANON] */ #define VSWTC 7 /* ??? */ #define VSWTCH VSWTC -#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */ -#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */ -#define VSUSP 10 /* Suspend character [ISIG]. */ +#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF] */ +#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF] */ +#define VSUSP 10 /* Suspend character [ISIG] */ #if 0 /* * VDSUSP is not supported */ -#define VDSUSP 11 /* Delayed suspend character [ISIG]. */ +#define VDSUSP 11 /* Delayed suspend character [ISIG] */ #endif -#define VREPRINT 12 /* Reprint-line character [ICANON]. */ -#define VDISCARD 13 /* Discard character [IEXTEN]. */ -#define VWERASE 14 /* Word-erase character [ICANON]. */ -#define VLNEXT 15 /* Literal-next character [IEXTEN]. */ -#define VEOF 16 /* End-of-file character [ICANON]. */ -#define VEOL 17 /* End-of-line character [ICANON]. */ +#define VREPRINT 12 /* Reprint-line character [ICANON] */ +#define VDISCARD 13 /* Discard character [IEXTEN] */ +#define VWERASE 14 /* Word-erase character [ICANON] */ +#define VLNEXT 15 /* Literal-next character [IEXTEN] */ +#define VEOF 16 /* End-of-file character [ICANON] */ +#define VEOL 17 /* End-of-line character [ICANON] */ /* c_iflag bits */ -#define IGNBRK 0000001 /* Ignore break condition. */ -#define BRKINT 0000002 /* Signal interrupt on break. */ -#define IGNPAR 0000004 /* Ignore characters with parity errors. */ -#define PARMRK 0000010 /* Mark parity and framing errors. */ -#define INPCK 0000020 /* Enable input parity check. */ -#define ISTRIP 0000040 /* Strip 8th bit off characters. */ -#define INLCR 0000100 /* Map NL to CR on input. */ -#define IGNCR 0000200 /* Ignore CR. */ -#define ICRNL 0000400 /* Map CR to NL on input. */ -#define IUCLC 0001000 /* Map upper case to lower case on input. */ -#define IXON 0002000 /* Enable start/stop output control. */ -#define IXANY 0004000 /* Any character will restart after stop. */ -#define IXOFF 0010000 /* Enable start/stop input control. */ -#define IMAXBEL 0020000 /* Ring bell when input queue is full. */ -#define IUTF8 0040000 /* Input is UTF-8 */ +#define IUCLC 0x0200 /* Map upper case to lower case on input */ +#define IXON 0x0400 /* Enable start/stop output control */ +#define IXOFF 0x1000 /* Enable start/stop input control */ +#define IMAXBEL 0x2000 /* Ring bell when input queue is full */ +#define IUTF8 0x4000 /* Input is UTF-8 */ /* c_oflag bits */ -#define OPOST 0000001 /* Perform output processing. */ -#define OLCUC 0000002 /* Map lower case to upper case on output. */ -#define ONLCR 0000004 /* Map NL to CR-NL on output. */ -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 +#define OLCUC 0x00002 /* Map lower case to upper case on output */ +#define ONLCR 0x00004 /* Map NL to CR-NL on output */ +#define NLDLY 0x00100 +#define NL0 0x00000 +#define NL1 0x00100 +#define CRDLY 0x00600 +#define CR0 0x00000 +#define CR1 0x00200 +#define CR2 0x00400 +#define CR3 0x00600 +#define TABDLY 0x01800 +#define TAB0 0x00000 +#define TAB1 0x00800 +#define TAB2 0x01000 +#define TAB3 0x01800 +#define XTABS 0x01800 +#define BSDLY 0x02000 +#define BS0 0x00000 +#define BS1 0x02000 +#define VTDLY 0x04000 +#define VT0 0x00000 +#define VT1 0x04000 +#define FFDLY 0x08000 +#define FF0 0x00000 +#define FF1 0x08000 /* #define PAGEOUT ??? #define WRAP ??? */ /* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 /* Number of bits per byte (mask). */ -#define CS5 0000000 /* 5 bits per byte. */ -#define CS6 0000020 /* 6 bits per byte. */ -#define CS7 0000040 /* 7 bits per byte. */ -#define CS8 0000060 /* 8 bits per byte. */ -#define CSTOPB 0000100 /* Two stop bits instead of one. */ -#define CREAD 0000200 /* Enable receiver. */ -#define PARENB 0000400 /* Parity enable. */ -#define PARODD 0001000 /* Odd parity instead of even. */ -#define HUPCL 0002000 /* Hang up on last close. */ -#define CLOCAL 0004000 /* Ignore modem status lines. */ -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ +#define CBAUD 0x0000100f +#define CSIZE 0x00000030 /* Number of bits per byte (mask) */ +#define CS5 0x00000000 /* 5 bits per byte */ +#define CS6 0x00000010 /* 6 bits per byte */ +#define CS7 0x00000020 /* 7 bits per byte */ +#define CS8 0x00000030 /* 8 bits per byte */ +#define CSTOPB 0x00000040 /* Two stop bits instead of one */ +#define CREAD 0x00000080 /* Enable receiver */ +#define PARENB 0x00000100 /* Parity enable */ +#define PARODD 0x00000200 /* Odd parity instead of even */ +#define HUPCL 0x00000400 /* Hang up on last close */ +#define CLOCAL 0x00000800 /* Ignore modem status lines */ +#define CBAUDEX 0x00001000 +#define BOTHER 0x00001000 +#define B57600 0x00001001 +#define B115200 0x00001002 +#define B230400 0x00001003 +#define B460800 0x00001004 +#define B500000 0x00001005 +#define B576000 0x00001006 +#define B921600 0x00001007 +#define B1000000 0x00001008 +#define B1152000 0x00001009 +#define B1500000 0x0000100a +#define B2000000 0x0000100b +#define B2500000 0x0000100c +#define B3000000 0x0000100d +#define B3500000 0x0000100e +#define B4000000 0x0000100f +#define CIBAUD 0x100f0000 /* input baud rate */ /* c_lflag bits */ -#define ISIG 0000001 /* Enable signals. */ -#define ICANON 0000002 /* Do erase and kill processing. */ -#define XCASE 0000004 -#define ECHO 0000010 /* Enable echo. */ -#define ECHOE 0000020 /* Visual erase for ERASE. */ -#define ECHOK 0000040 /* Echo NL after KILL. */ -#define ECHONL 0000100 /* Echo NL even if ECHO is off. */ -#define NOFLSH 0000200 /* Disable flush after interrupt. */ -#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */ -#define ECHOCTL 0001000 /* Echo control characters as ^X. */ -#define ECHOPRT 0002000 /* Hardcopy visual erase. */ -#define ECHOKE 0004000 /* Visual erase for KILL. */ -#define FLUSHO 0020000 -#define PENDIN 0040000 /* Retype pending input (state). */ -#define TOSTOP 0100000 /* Send SIGTTOU for background output. */ -#define ITOSTOP TOSTOP -#define EXTPROC 0200000 /* External processing on pty */ +#define ISIG 0x00001 /* Enable signals */ +#define ICANON 0x00002 /* Do erase and kill processing */ +#define XCASE 0x00004 +#define ECHO 0x00008 /* Enable echo */ +#define ECHOE 0x00010 /* Visual erase for ERASE */ +#define ECHOK 0x00020 /* Echo NL after KILL */ +#define ECHONL 0x00040 /* Echo NL even if ECHO is off */ +#define NOFLSH 0x00080 /* Disable flush after interrupt */ +#define IEXTEN 0x00100 /* Enable DISCARD and LNEXT */ +#define ECHOCTL 0x00200 /* Echo control characters as ^X */ +#define ECHOPRT 0x00400 /* Hardcopy visual erase */ +#define ECHOKE 0x00800 /* Visual erase for KILL */ +#define FLUSHO 0x02000 +#define PENDIN 0x04000 /* Retype pending input (state) */ +#define TOSTOP 0x08000 /* Send SIGTTOU for background output */ +#define ITOSTOP TOSTOP +#define EXTPROC 0x10000 /* External processing on pty */ /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 /* Suspend output. */ -#define TCOON 1 /* Restart suspended output. */ -#define TCIOFF 2 /* Send a STOP character. */ -#define TCION 3 /* Send a START character. */ - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 /* Discard data received but not yet read. */ -#define TCOFLUSH 1 /* Discard data written but not yet sent. */ -#define TCIOFLUSH 2 /* Discard all pending data. */ - /* tcsetattr uses these */ -#define TCSANOW TCSETS /* Change immediately. */ -#define TCSADRAIN TCSETSW /* Change when pending output is written. */ -#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */ +#define TCSANOW TCSETS /* Change immediately */ +#define TCSADRAIN TCSETSW /* Change when pending output is written */ +#define TCSAFLUSH TCSETSF /* Flush pending input before changing */ #endif /* _ASM_TERMBITS_H */ diff --git a/arch/parisc/include/uapi/asm/termbits.h b/arch/parisc/include/uapi/asm/termbits.h index 40e920f8d683..3a8938d26fb4 100644 --- a/arch/parisc/include/uapi/asm/termbits.h +++ b/arch/parisc/include/uapi/asm/termbits.h @@ -2,10 +2,8 @@ #ifndef __ARCH_PARISC_TERMBITS_H__ #define __ARCH_PARISC_TERMBITS_H__ -#include <linux/posix_types.h> +#include <asm-generic/termbits-common.h> -typedef unsigned char cc_t; -typedef unsigned int speed_t; typedef unsigned int tcflag_t; #define NCCS 19 @@ -41,158 +39,107 @@ struct ktermios { }; /* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 /* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0040000 -#define IUTF8 0100000 +#define IUCLC 0x0200 +#define IXON 0x0400 +#define IXOFF 0x1000 +#define IMAXBEL 0x4000 +#define IUTF8 0x8000 /* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 +#define OLCUC 0x00002 +#define ONLCR 0x00004 +#define NLDLY 0x00100 +#define NL0 0x00000 +#define NL1 0x00100 +#define CRDLY 0x00600 +#define CR0 0x00000 +#define CR1 0x00200 +#define CR2 0x00400 +#define CR3 0x00600 +#define TABDLY 0x01800 +#define TAB0 0x00000 +#define TAB1 0x00800 +#define TAB2 0x01000 +#define TAB3 0x01800 +#define XTABS 0x01800 +#define BSDLY 0x02000 +#define BS0 0x00000 +#define BS1 0x02000 +#define VTDLY 0x04000 +#define VT0 0x00000 +#define VT1 0x04000 +#define FFDLY 0x08000 +#define FF0 0x00000 +#define FF1 0x08000 /* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - +#define CBAUD 0x0000100f +#define CSIZE 0x00000030 +#define CS5 0x00000000 +#define CS6 0x00000010 +#define CS7 0x00000020 +#define CS8 0x00000030 +#define CSTOPB 0x00000040 +#define CREAD 0x00000080 +#define PARENB 0x00000100 +#define PARODD 0x00000200 +#define HUPCL 0x00000400 +#define CLOCAL 0x00000800 +#define CBAUDEX 0x00001000 +#define BOTHER 0x00001000 +#define B57600 0x00001001 +#define B115200 0x00001002 +#define B230400 0x00001003 +#define B460800 0x00001004 +#define B500000 0x00001005 +#define B576000 0x00001006 +#define B921600 0x00001007 +#define B1000000 0x00001008 +#define B1152000 0x00001009 +#define B1500000 0x0000100a +#define B2000000 0x0000100b +#define B2500000 0x0000100c +#define B3000000 0x0000100d +#define B3500000 0x0000100e +#define B4000000 0x0000100f +#define CIBAUD 0x100f0000 /* input baud rate */ /* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 +#define ISIG 0x00001 +#define ICANON 0x00002 +#define XCASE 0x00004 +#define ECHO 0x00008 +#define ECHOE 0x00010 +#define ECHOK 0x00020 +#define ECHONL 0x00040 +#define NOFLSH 0x00080 +#define TOSTOP 0x00100 +#define ECHOCTL 0x00200 +#define ECHOPRT 0x00400 +#define ECHOKE 0x00800 +#define FLUSHO 0x01000 +#define PENDIN 0x04000 +#define IEXTEN 0x08000 +#define EXTPROC 0x10000 /* tcsetattr uses these */ #define TCSANOW 0 diff --git a/arch/powerpc/include/uapi/asm/termbits.h b/arch/powerpc/include/uapi/asm/termbits.h index ed18bc61f63d..21dc86dcb2f1 100644 --- a/arch/powerpc/include/uapi/asm/termbits.h +++ b/arch/powerpc/include/uapi/asm/termbits.h @@ -9,8 +9,8 @@ * 2 of the License, or (at your option) any later version. */ -typedef unsigned char cc_t; -typedef unsigned int speed_t; +#include <asm-generic/termbits-common.h> + typedef unsigned int tcflag_t; /* @@ -64,115 +64,72 @@ struct ktermios { #define VDISCARD 16 /* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IXON 0001000 -#define IXOFF 0002000 -#define IXANY 0004000 -#define IUCLC 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 +#define IXON 0x0200 +#define IXOFF 0x0400 +#define IUCLC 0x1000 +#define IMAXBEL 0x2000 +#define IUTF8 0x4000 /* c_oflag bits */ -#define OPOST 0000001 -#define ONLCR 0000002 -#define OLCUC 0000004 - -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 - -#define OFILL 00000100 -#define OFDEL 00000200 -#define NLDLY 00001400 -#define NL0 00000000 -#define NL1 00000400 -#define NL2 00001000 -#define NL3 00001400 -#define TABDLY 00006000 -#define TAB0 00000000 -#define TAB1 00002000 -#define TAB2 00004000 -#define TAB3 00006000 -#define XTABS 00006000 /* required by POSIX to == TAB3 */ -#define CRDLY 00030000 -#define CR0 00000000 -#define CR1 00010000 -#define CR2 00020000 -#define CR3 00030000 -#define FFDLY 00040000 -#define FF0 00000000 -#define FF1 00040000 -#define BSDLY 00100000 -#define BS0 00000000 -#define BS1 00100000 -#define VTDLY 00200000 -#define VT0 00000000 -#define VT1 00200000 +#define ONLCR 0x00002 +#define OLCUC 0x00004 +#define NLDLY 0x00300 +#define NL0 0x00000 +#define NL1 0x00100 +#define NL2 0x00200 +#define NL3 0x00300 +#define TABDLY 0x00c00 +#define TAB0 0x00000 +#define TAB1 0x00400 +#define TAB2 0x00800 +#define TAB3 0x00c00 +#define XTABS 0x00c00 /* required by POSIX to == TAB3 */ +#define CRDLY 0x03000 +#define CR0 0x00000 +#define CR1 0x01000 +#define CR2 0x02000 +#define CR3 0x03000 +#define FFDLY 0x04000 +#define FF0 0x00000 +#define FF1 0x04000 +#define BSDLY 0x08000 +#define BS0 0x00000 +#define BS1 0x08000 +#define VTDLY 0x10000 +#define VT0 0x00000 +#define VT1 0x10000 /* c_cflag bit meaning */ -#define CBAUD 0000377 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CBAUDEX 0000000 -#define B57600 00020 -#define B115200 00021 -#define B230400 00022 -#define B460800 00023 -#define B500000 00024 -#define B576000 00025 -#define B921600 00026 -#define B1000000 00027 -#define B1152000 00030 -#define B1500000 00031 -#define B2000000 00032 -#define B2500000 00033 -#define B3000000 00034 -#define B3500000 00035 -#define B4000000 00036 -#define BOTHER 00037 - -#define CIBAUD 077600000 -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -#define CSIZE 00001400 -#define CS5 00000000 -#define CS6 00000400 -#define CS7 00001000 -#define CS8 00001400 - -#define CSTOPB 00002000 -#define CREAD 00004000 -#define PARENB 00010000 -#define PARODD 00020000 -#define HUPCL 00040000 - -#define CLOCAL 00100000 -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ +#define CBAUD 0x000000ff +#define CBAUDEX 0x00000000 +#define BOTHER 0x0000001f +#define B57600 0x00000010 +#define B115200 0x00000011 +#define B230400 0x00000012 +#define B460800 0x00000013 +#define B500000 0x00000014 +#define B576000 0x00000015 +#define B921600 0x00000016 +#define B1000000 0x00000017 +#define B1152000 0x00000018 +#define B1500000 0x00000019 +#define B2000000 0x0000001a +#define B2500000 0x0000001b +#define B3000000 0x0000001c +#define B3500000 0x0000001d +#define B4000000 0x0000001e +#define CSIZE 0x00000300 +#define CS5 0x00000000 +#define CS6 0x00000100 +#define CS7 0x00000200 +#define CS8 0x00000300 +#define CSTOPB 0x00000400 +#define CREAD 0x00000800 +#define PARENB 0x00001000 +#define PARODD 0x00002000 +#define HUPCL 0x00004000 +#define CLOCAL 0x00008000 +#define CIBAUD 0x00ff0000 /* c_lflag bits */ #define ISIG 0x00000080 @@ -192,17 +149,6 @@ struct ktermios { #define IEXTEN 0x00000400 #define EXTPROC 0x10000000 -/* Values for the ACTION argument to `tcflow'. */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - /* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ #define TCSANOW 0 #define TCSADRAIN 1 diff --git a/arch/sparc/include/uapi/asm/termbits.h b/arch/sparc/include/uapi/asm/termbits.h index ce5ad5d0f105..4321322701fc 100644 --- a/arch/sparc/include/uapi/asm/termbits.h +++ b/arch/sparc/include/uapi/asm/termbits.h @@ -2,15 +2,12 @@ #ifndef _UAPI_SPARC_TERMBITS_H #define _UAPI_SPARC_TERMBITS_H -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; +#include <asm-generic/termbits-common.h> #if defined(__sparc__) && defined(__arch64__) -typedef unsigned int tcflag_t; +typedef unsigned int tcflag_t; #else -typedef unsigned long tcflag_t; +typedef unsigned long tcflag_t; #endif #define NCC 8 @@ -61,21 +58,19 @@ struct ktermios { }; /* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VEOL 5 -#define VEOL2 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 - - +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VEOL 5 +#define VEOL2 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 #define VSUSP 10 -#define VDSUSP 11 /* SunOS POSIX nicety I do believe... */ +#define VDSUSP 11 /* SunOS POSIX nicety I do believe... */ #define VREPRINT 12 #define VDISCARD 13 #define VWERASE 14 @@ -90,121 +85,83 @@ struct ktermios { #endif /* c_iflag bits */ -#define IGNBRK 0x00000001 -#define BRKINT 0x00000002 -#define IGNPAR 0x00000004 -#define PARMRK 0x00000008 -#define INPCK 0x00000010 -#define ISTRIP 0x00000020 -#define INLCR 0x00000040 -#define IGNCR 0x00000080 -#define ICRNL 0x00000100 -#define IUCLC 0x00000200 -#define IXON 0x00000400 -#define IXANY 0x00000800 -#define IXOFF 0x00001000 -#define IMAXBEL 0x00002000 -#define IUTF8 0x00004000 +#define IUCLC 0x0200 +#define IXON 0x0400 +#define IXOFF 0x1000 +#define IMAXBEL 0x2000 +#define IUTF8 0x4000 /* c_oflag bits */ -#define OPOST 0x00000001 -#define OLCUC 0x00000002 -#define ONLCR 0x00000004 -#define OCRNL 0x00000008 -#define ONOCR 0x00000010 -#define ONLRET 0x00000020 -#define OFILL 0x00000040 -#define OFDEL 0x00000080 -#define NLDLY 0x00000100 -#define NL0 0x00000000 -#define NL1 0x00000100 -#define CRDLY 0x00000600 -#define CR0 0x00000000 -#define CR1 0x00000200 -#define CR2 0x00000400 -#define CR3 0x00000600 -#define TABDLY 0x00001800 -#define TAB0 0x00000000 -#define TAB1 0x00000800 -#define TAB2 0x00001000 -#define TAB3 0x00001800 -#define XTABS 0x00001800 -#define BSDLY 0x00002000 -#define BS0 0x00000000 -#define BS1 0x00002000 -#define VTDLY 0x00004000 -#define VT0 0x00000000 -#define VT1 0x00004000 -#define FFDLY 0x00008000 -#define FF0 0x00000000 -#define FF1 0x00008000 -#define PAGEOUT 0x00010000 /* SUNOS specific */ -#define WRAP 0x00020000 /* SUNOS specific */ +#define OLCUC 0x00002 +#define ONLCR 0x00004 +#define NLDLY 0x00100 +#define NL0 0x00000 +#define NL1 0x00100 +#define CRDLY 0x00600 +#define CR0 0x00000 +#define CR1 0x00200 +#define CR2 0x00400 +#define CR3 0x00600 +#define TABDLY 0x01800 +#define TAB0 0x00000 +#define TAB1 0x00800 +#define TAB2 0x01000 +#define TAB3 0x01800 +#define XTABS 0x01800 +#define BSDLY 0x02000 +#define BS0 0x00000 +#define BS1 0x02000 +#define VTDLY 0x04000 +#define VT0 0x00000 +#define VT1 0x04000 +#define FFDLY 0x08000 +#define FF0 0x00000 +#define FF1 0x08000 +#define PAGEOUT 0x10000 /* SUNOS specific */ +#define WRAP 0x20000 /* SUNOS specific */ /* c_cflag bit meaning */ -#define CBAUD 0x0000100f -#define B0 0x00000000 /* hang up */ -#define B50 0x00000001 -#define B75 0x00000002 -#define B110 0x00000003 -#define B134 0x00000004 -#define B150 0x00000005 -#define B200 0x00000006 -#define B300 0x00000007 -#define B600 0x00000008 -#define B1200 0x00000009 -#define B1800 0x0000000a -#define B2400 0x0000000b -#define B4800 0x0000000c -#define B9600 0x0000000d -#define B19200 0x0000000e -#define B38400 0x0000000f -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0x00000030 -#define CS5 0x00000000 -#define CS6 0x00000010 -#define CS7 0x00000020 -#define CS8 0x00000030 -#define CSTOPB 0x00000040 -#define CREAD 0x00000080 -#define PARENB 0x00000100 -#define PARODD 0x00000200 -#define HUPCL 0x00000400 -#define CLOCAL 0x00000800 -#define CBAUDEX 0x00001000 +#define CBAUD 0x0000100f +#define CSIZE 0x00000030 +#define CS5 0x00000000 +#define CS6 0x00000010 +#define CS7 0x00000020 +#define CS8 0x00000030 +#define CSTOPB 0x00000040 +#define CREAD 0x00000080 +#define PARENB 0x00000100 +#define PARODD 0x00000200 +#define HUPCL 0x00000400 +#define CLOCAL 0x00000800 +#define CBAUDEX 0x00001000 /* We'll never see these speeds with the Zilogs, but for completeness... */ -#define BOTHER 0x00001000 -#define B57600 0x00001001 -#define B115200 0x00001002 -#define B230400 0x00001003 -#define B460800 0x00001004 +#define BOTHER 0x00001000 +#define B57600 0x00001001 +#define B115200 0x00001002 +#define B230400 0x00001003 +#define B460800 0x00001004 /* This is what we can do with the Zilogs. */ -#define B76800 0x00001005 +#define B76800 0x00001005 /* This is what we can do with the SAB82532. */ -#define B153600 0x00001006 -#define B307200 0x00001007 -#define B614400 0x00001008 -#define B921600 0x00001009 +#define B153600 0x00001006 +#define B307200 0x00001007 +#define B614400 0x00001008 +#define B921600 0x00001009 /* And these are the rest... */ -#define B500000 0x0000100a -#define B576000 0x0000100b -#define B1000000 0x0000100c -#define B1152000 0x0000100d -#define B1500000 0x0000100e -#define B2000000 0x0000100f +#define B500000 0x0000100a +#define B576000 0x0000100b +#define B1000000 0x0000100c +#define B1152000 0x0000100d +#define B1500000 0x0000100e +#define B2000000 0x0000100f /* These have totally bogus values and nobody uses them so far. Later on we'd have to use say 0x10000x and adjust CBAUD constant and drivers accordingly. -#define B2500000 0x00001010 -#define B3000000 0x00001011 -#define B3500000 0x00001012 -#define B4000000 0x00001013 */ -#define CIBAUD 0x100f0000 /* input baud rate (not used) */ -#define CMSPAR 0x40000000 /* mark or space (stick) parity */ -#define CRTSCTS 0x80000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ +#define B2500000 0x00001010 +#define B3000000 0x00001011 +#define B3500000 0x00001012 +#define B4000000 0x00001013 */ +#define CIBAUD 0x100f0000 /* input baud rate (not used) */ /* c_lflag bits */ #define ISIG 0x00000001 @@ -219,7 +176,7 @@ struct ktermios { #define ECHOCTL 0x00000200 #define ECHOPRT 0x00000400 #define ECHOKE 0x00000800 -#define DEFECHO 0x00001000 /* SUNOS thing, what is it? */ +#define DEFECHO 0x00001000 /* SUNOS thing, what is it? */ #define FLUSHO 0x00002000 #define PENDIN 0x00004000 #define IEXTEN 0x00008000 @@ -244,21 +201,9 @@ struct ktermios { /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - /* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 #endif /* _UAPI_SPARC_TERMBITS_H */ diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 55f48375e3fe..69fd31ffb847 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -18,7 +18,8 @@ config TTY_PRINTK The feature is useful to inline user messages with kernel messages. In order to use this feature, you should output user messages - to /dev/ttyprintk or redirect console to this TTY. + to /dev/ttyprintk or redirect console to this TTY, or boot + the kernel with console=ttyprintk. If unsure, say N. diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 78baba55a8b5..0daf1bc95360 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -1418,7 +1418,11 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); /* byte size and parity */ - + if ((cflag & CSIZE) != CS8) { + cflag &= ~CSIZE; + cflag |= CS7; + tty->termios.c_cflag = cflag; + } info->params.data_bits = tty_get_char_size(cflag); if (cflag & CSTOPB) @@ -1432,10 +1436,8 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) info->params.parity = ASYNC_PARITY_ODD; else info->params.parity = ASYNC_PARITY_EVEN; -#ifdef CMSPAR if (cflag & CMSPAR) info->params.parity = ASYNC_PARITY_SPACE; -#endif } /* calculate number of jiffies to transmit a full diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index adf941c47506..ed45d04905c2 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -11,6 +11,7 @@ * of the boot process, for example. */ +#include <linux/console.h> #include <linux/device.h> #include <linux/serial.h> #include <linux/tty.h> @@ -163,6 +164,18 @@ static const struct tty_port_operations tpk_port_ops = { static struct tty_driver *ttyprintk_driver; +static struct tty_driver *ttyprintk_console_device(struct console *c, + int *index) +{ + *index = 0; + return ttyprintk_driver; +} + +static struct console ttyprintk_console = { + .name = "ttyprintk", + .device = ttyprintk_console_device, +}; + static int __init ttyprintk_init(void) { int ret; @@ -195,6 +208,8 @@ static int __init ttyprintk_init(void) goto error; } + register_console(&ttyprintk_console); + return 0; error: @@ -205,6 +220,7 @@ error: static void __exit ttyprintk_exit(void) { + unregister_console(&ttyprintk_console); tty_unregister_driver(ttyprintk_driver); tty_driver_kref_put(ttyprintk_driver); tty_port_destroy(&tpk_port.port); diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 533d02b38e02..afb2d373dd47 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -588,10 +588,8 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info, } if (!(cflag & PARODD)) cval |= UART_LCR_EPAR; -#ifdef CMSPAR if (cflag & CMSPAR) cval |= UART_LCR_SPAR; -#endif /* Determine divisor based on baud rate */ baud = tty_get_baud_rate(tty); diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 9e8ccb8ed6d6..c7968aecd870 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -405,6 +405,7 @@ static int goldfish_tty_probe(struct platform_device *pdev) err_tty_register_device_failed: free_irq(irq, qtty); err_dec_line_count: + tty_port_destroy(&qtty->port); goldfish_tty_current_line_count--; if (goldfish_tty_current_line_count == 0) goldfish_tty_delete_driver(); @@ -426,6 +427,7 @@ static int goldfish_tty_remove(struct platform_device *pdev) iounmap(qtty->base); qtty->base = NULL; free_irq(qtty->irq, pdev); + tty_port_destroy(&qtty->port); goldfish_tty_current_line_count--; if (goldfish_tty_current_line_count == 0) goldfish_tty_delete_driver(); diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index 8d60e0ff67b4..4f9264d005c0 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -87,6 +87,25 @@ config HVC_DCC driver. This console is used through a JTAG only on ARM. If you don't have a JTAG then you probably don't want this option. +config HVC_DCC_SERIALIZE_SMP + bool "Use DCC only on CPU core 0" + depends on SMP && HVC_DCC + help + This is a DEBUG option to serialize all console input and output to CPU 0. + Some external debuggers, do not handle reads/writes from/to DCC on more + than one CPU core. Each core has its own DCC device registers, so when a + CPU core reads or writes from/to DCC, it only accesses its own DCC device. + Since kernel code can run on any CPU core, every time the kernel wants to + write to the console, it might write to a different DCC. + + In SMP mode, external debuggers create multiple windows, and each window + shows the DCC output only from that core's DCC. The result is that + console output is either lost or scattered across windows. + + Enable this option only if you are sure that you do not need features like + CPU hotplug to work. For example, during early chipset bringups without + debug serial console support. If unsure, say N. + config HVC_RISCV_SBI bool "RISC-V SBI console support" depends on RISCV_SBI_V01 diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index bd61f9372d83..1751108cf763 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -1,10 +1,15 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. */ +/* Copyright (c) 2010, 2014, 2022 The Linux Foundation. All rights reserved. */ #include <linux/console.h> +#include <linux/cpu.h> +#include <linux/cpumask.h> #include <linux/init.h> +#include <linux/kfifo.h> #include <linux/serial.h> #include <linux/serial_core.h> +#include <linux/smp.h> +#include <linux/spinlock.h> #include <asm/dcc.h> #include <asm/processor.h> @@ -15,6 +20,15 @@ #define DCC_STATUS_RX (1 << 30) #define DCC_STATUS_TX (1 << 29) +#define DCC_INBUF_SIZE 128 +#define DCC_OUTBUF_SIZE 1024 + +/* Lock to serialize access to DCC fifo */ +static DEFINE_SPINLOCK(dcc_lock); + +static DEFINE_KFIFO(inbuf, unsigned char, DCC_INBUF_SIZE); +static DEFINE_KFIFO(outbuf, unsigned char, DCC_OUTBUF_SIZE); + static void dcc_uart_console_putchar(struct uart_port *port, unsigned char ch) { while (__dcc_getstatus() & DCC_STATUS_TX) @@ -67,24 +81,176 @@ static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count) return i; } +/* + * Check if the DCC is enabled. If CONFIG_HVC_DCC_SERIALIZE_SMP is enabled, + * then we assume then this function will be called first on core0. That way, + * dcc_core0_available will be true only if it's available on core0. + */ static bool hvc_dcc_check(void) { unsigned long time = jiffies + (HZ / 10); + static bool dcc_core0_available; + + /* + * If we're not on core 0, but we previously confirmed that DCC is + * active, then just return true. + */ + int cpu = get_cpu(); + + if (IS_ENABLED(CONFIG_HVC_DCC_SERIALIZE_SMP) && cpu && dcc_core0_available) { + put_cpu(); + return true; + } + + put_cpu(); /* Write a test character to check if it is handled */ __dcc_putchar('\n'); while (time_is_after_jiffies(time)) { - if (!(__dcc_getstatus() & DCC_STATUS_TX)) + if (!(__dcc_getstatus() & DCC_STATUS_TX)) { + dcc_core0_available = true; return true; + } } return false; } +/* + * Workqueue function that writes the output FIFO to the DCC on core 0. + */ +static void dcc_put_work(struct work_struct *work) +{ + unsigned char ch; + unsigned long irqflags; + + spin_lock_irqsave(&dcc_lock, irqflags); + + /* While there's data in the output FIFO, write it to the DCC */ + while (kfifo_get(&outbuf, &ch)) + hvc_dcc_put_chars(0, &ch, 1); + + /* While we're at it, check for any input characters */ + while (!kfifo_is_full(&inbuf)) { + if (!hvc_dcc_get_chars(0, &ch, 1)) + break; + kfifo_put(&inbuf, ch); + } + + spin_unlock_irqrestore(&dcc_lock, irqflags); +} + +static DECLARE_WORK(dcc_pwork, dcc_put_work); + +/* + * Workqueue function that reads characters from DCC and puts them into the + * input FIFO. + */ +static void dcc_get_work(struct work_struct *work) +{ + unsigned char ch; + unsigned long irqflags; + + /* + * Read characters from DCC and put them into the input FIFO, as + * long as there is room and we have characters to read. + */ + spin_lock_irqsave(&dcc_lock, irqflags); + + while (!kfifo_is_full(&inbuf)) { + if (!hvc_dcc_get_chars(0, &ch, 1)) + break; + kfifo_put(&inbuf, ch); + } + spin_unlock_irqrestore(&dcc_lock, irqflags); +} + +static DECLARE_WORK(dcc_gwork, dcc_get_work); + +/* + * Write characters directly to the DCC if we're on core 0 and the FIFO + * is empty, or write them to the FIFO if we're not. + */ +static int hvc_dcc0_put_chars(u32 vt, const char *buf, int count) +{ + int len; + unsigned long irqflags; + + if (!IS_ENABLED(CONFIG_HVC_DCC_SERIALIZE_SMP)) + return hvc_dcc_put_chars(vt, buf, count); + + spin_lock_irqsave(&dcc_lock, irqflags); + if (smp_processor_id() || (!kfifo_is_empty(&outbuf))) { + len = kfifo_in(&outbuf, buf, count); + spin_unlock_irqrestore(&dcc_lock, irqflags); + + /* + * We just push data to the output FIFO, so schedule the + * workqueue that will actually write that data to DCC. + * CPU hotplug is disabled in dcc_init so CPU0 cannot be + * offlined after the cpu online check. + */ + if (cpu_online(0)) + schedule_work_on(0, &dcc_pwork); + + return len; + } + + /* + * If we're already on core 0, and the FIFO is empty, then just + * write the data to DCC. + */ + len = hvc_dcc_put_chars(vt, buf, count); + spin_unlock_irqrestore(&dcc_lock, irqflags); + + return len; +} + +/* + * Read characters directly from the DCC if we're on core 0 and the FIFO + * is empty, or read them from the FIFO if we're not. + */ +static int hvc_dcc0_get_chars(u32 vt, char *buf, int count) +{ + int len; + unsigned long irqflags; + + if (!IS_ENABLED(CONFIG_HVC_DCC_SERIALIZE_SMP)) + return hvc_dcc_get_chars(vt, buf, count); + + spin_lock_irqsave(&dcc_lock, irqflags); + + if (smp_processor_id() || (!kfifo_is_empty(&inbuf))) { + len = kfifo_out(&inbuf, buf, count); + spin_unlock_irqrestore(&dcc_lock, irqflags); + + /* + * If the FIFO was empty, there may be characters in the DCC + * that we haven't read yet. Schedule a workqueue to fill + * the input FIFO, so that the next time this function is + * called, we'll have data. CPU hotplug is disabled in dcc_init + * so CPU0 cannot be offlined after the cpu online check. + */ + if (!len && cpu_online(0)) + schedule_work_on(0, &dcc_gwork); + + return len; + } + + /* + * If we're already on core 0, and the FIFO is empty, then just + * read the data from DCC. + */ + len = hvc_dcc_get_chars(vt, buf, count); + spin_unlock_irqrestore(&dcc_lock, irqflags); + + return len; +} + static const struct hv_ops hvc_dcc_get_put_ops = { - .get_chars = hvc_dcc_get_chars, - .put_chars = hvc_dcc_put_chars, + .get_chars = hvc_dcc0_get_chars, + .put_chars = hvc_dcc0_put_chars, }; static int __init hvc_dcc_console_init(void) @@ -108,6 +274,26 @@ static int __init hvc_dcc_init(void) if (!hvc_dcc_check()) return -ENODEV; + if (IS_ENABLED(CONFIG_HVC_DCC_SERIALIZE_SMP)) { + pr_warn("\n"); + pr_warn("********************************************************************\n"); + pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n"); + pr_warn("** **\n"); + pr_warn("** HVC_DCC_SERIALIZE_SMP SUPPORT HAS BEEN ENABLED IN THIS KERNEL **\n"); + pr_warn("** **\n"); + pr_warn("** This means that this is a DEBUG kernel and unsafe for **\n"); + pr_warn("** production use and has important feature like CPU hotplug **\n"); + pr_warn("** disabled. **\n"); + pr_warn("** **\n"); + pr_warn("** If you see this message and you are not debugging the **\n"); + pr_warn("** kernel, report this immediately to your vendor! **\n"); + pr_warn("** **\n"); + pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n"); + pr_warn("********************************************************************\n"); + + cpu_hotplug_disable(); + } + p = hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128); return PTR_ERR_OR_ZERO(p); diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c index 056ae21a5121..794c7b18aa06 100644 --- a/drivers/tty/hvc/hvc_opal.c +++ b/drivers/tty/hvc/hvc_opal.c @@ -13,12 +13,12 @@ #include <linux/slab.h> #include <linux/console.h> #include <linux/of.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/export.h> #include <linux/interrupt.h> #include <asm/hvconsole.h> -#include <asm/prom.h> #include <asm/firmware.h> #include <asm/hvsi.h> #include <asm/udbg.h> @@ -342,9 +342,9 @@ void __init hvc_opal_init_early(void) * path, so we hard wire it */ opal = of_find_node_by_path("/ibm,opal/consoles"); - if (opal) + if (opal) { pr_devel("hvc_opal: Found consoles in new location\n"); - if (!opal) { + } else { opal = of_find_node_by_path("/ibm,opal"); if (opal) pr_devel("hvc_opal: " diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index 72b11aa7e0a6..736b230f5ec0 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -28,10 +28,10 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/console.h> +#include <linux/of.h> #include <asm/hvconsole.h> #include <asm/vio.h> -#include <asm/prom.h> #include <asm/hvsi.h> #include <asm/udbg.h> #include <asm/machdep.h> diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 245da1dfd818..9b7e8246a464 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -581,10 +581,9 @@ static int hvcs_io(struct hvcs_struct *hvcsd) spin_unlock_irqrestore(&hvcsd->lock, flags); /* This is synch -- FIXME :js: it is not! */ - if(got) + if (got) tty_flip_buffer_push(&hvcsd->port); - - if (!got) { + else { /* Do this _after_ the flip_buffer_push */ spin_lock_irqsave(&hvcsd->lock, flags); vio_enable_interrupts(hvcsd->vdev); diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index aa81f4835fef..a200d01eceed 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -26,13 +26,13 @@ #include <linux/module.h> #include <linux/major.h> #include <linux/kernel.h> +#include <linux/of_irq.h> #include <linux/spinlock.h> #include <linux/sysrq.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <asm/hvcall.h> #include <asm/hvconsole.h> -#include <asm/prom.h> #include <linux/uaccess.h> #include <asm/vio.h> #include <asm/param.h> diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 6ebd3e4ed859..70b982b2c6b2 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -528,7 +528,6 @@ static int mxser_set_baud(struct tty_struct *tty, speed_t newspd) outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ -#ifdef BOTHER if (C_BAUD(tty) == BOTHER) { quot = MXSER_BAUD_BASE % newspd; quot *= 8; @@ -539,9 +538,9 @@ static int mxser_set_baud(struct tty_struct *tty, speed_t newspd) quot /= newspd; mxser_set_must_enum_value(info->ioaddr, quot); - } else -#endif + } else { mxser_set_must_enum_value(info->ioaddr, 0); + } return 0; } diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index fd8b86dde525..137eebdcfda9 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -444,6 +444,25 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci) return modembits; } +static void gsm_hex_dump_bytes(const char *fname, const u8 *data, + unsigned long len) +{ + char *prefix; + + if (!fname) { + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, data, len, + true); + return; + } + + prefix = kasprintf(GFP_KERNEL, "%s: ", fname); + if (!prefix) + return; + print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_OFFSET, 16, 1, data, len, + true); + kfree(prefix); +} + /** * gsm_print_packet - display a frame for debug * @hdr: header to print before decode @@ -508,7 +527,7 @@ static void gsm_print_packet(const char *hdr, int addr, int cr, else pr_cont("(F)"); - print_hex_dump_bytes("", DUMP_PREFIX_NONE, data, dlen); + gsm_hex_dump_bytes(NULL, data, dlen); } @@ -698,9 +717,7 @@ static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci) } if (debug & 4) - print_hex_dump_bytes("gsm_data_kick: ", - DUMP_PREFIX_OFFSET, - gsm->txframe, len); + gsm_hex_dump_bytes(__func__, gsm->txframe, len); if (gsmld_output(gsm, gsm->txframe, len) <= 0) break; /* FIXME: Can eliminate one SOF in many more cases */ @@ -749,7 +766,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) *--dp = msg->ctrl; if (gsm->initiator) - *--dp = (msg->addr << 2) | 2 | EA; + *--dp = (msg->addr << 2) | CR | EA; else *--dp = (msg->addr << 2) | EA; *fcs = gsm_fcs_add_block(INIT_FCS, dp , msg->data - dp); @@ -1907,10 +1924,6 @@ static void gsm_queue(struct gsm_mux *gsm) case UI|PF: case UIH: case UIH|PF: -#if 0 - if (cr) - goto invalid; -#endif if (dlci == NULL || dlci->state != DLCI_OPEN) { gsm_command(gsm, address, DM|PF); return; @@ -2448,8 +2461,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len) return -ENOSPC; } if (debug & 4) - print_hex_dump_bytes("gsmld_output: ", DUMP_PREFIX_OFFSET, - data, len); + gsm_hex_dump_bytes(__func__, data, len); return gsm->tty->ops->write(gsm->tty, data, len); } @@ -2525,8 +2537,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, char flags = TTY_NORMAL; if (debug & 4) - print_hex_dump_bytes("gsmld_receive: ", DUMP_PREFIX_OFFSET, - cp, count); + gsm_hex_dump_bytes(__func__, cp, count); for (; count; count--, cp++) { if (fp) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index efc72104c840..640c9e871044 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1220,21 +1220,34 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) process_echoes(tty); } +static bool n_tty_is_char_flow_ctrl(struct tty_struct *tty, unsigned char c) +{ + return c == START_CHAR(tty) || c == STOP_CHAR(tty); +} + +/* Returns true if c is consumed as flow-control character */ +static bool n_tty_receive_char_flow_ctrl(struct tty_struct *tty, unsigned char c) +{ + if (!n_tty_is_char_flow_ctrl(tty, c)) + return false; + + if (c == START_CHAR(tty)) { + start_tty(tty); + process_echoes(tty); + return true; + } + + /* STOP_CHAR */ + stop_tty(tty); + return true; +} + static void n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) { struct n_tty_data *ldata = tty->disc_data; - if (I_IXON(tty)) { - if (c == START_CHAR(tty)) { - start_tty(tty); - process_echoes(tty); - return; - } - if (c == STOP_CHAR(tty)) { - stop_tty(tty); - return; - } - } + if (I_IXON(tty) && n_tty_receive_char_flow_ctrl(tty, c)) + return; if (L_ISIG(tty)) { if (c == INTR_CHAR(tty)) { @@ -1975,6 +1988,35 @@ static bool canon_copy_from_read_buf(struct tty_struct *tty, return ldata->read_tail != canon_head; } +/* + * If we finished a read at the exact location of an + * EOF (special EOL character that's a __DISABLED_CHAR) + * in the stream, silently eat the EOF. + */ +static void canon_skip_eof(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + size_t tail, canon_head; + + canon_head = smp_load_acquire(&ldata->canon_head); + tail = ldata->read_tail; + + // No data? + if (tail == canon_head) + return; + + // See if the tail position is EOF in the circular buffer + tail &= (N_TTY_BUF_SIZE - 1); + if (!test_bit(tail, ldata->read_flags)) + return; + if (read_buf(ldata, tail) != __DISABLED_CHAR) + return; + + // Clear the EOL bit, skip the EOF char. + clear_bit(tail, ldata->read_flags); + smp_store_release(&ldata->read_tail, ldata->read_tail + 1); +} + /** * job_control - check job control * @tty: tty @@ -2045,7 +2087,14 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, */ if (*cookie) { if (ldata->icanon && !L_EXTPROC(tty)) { - if (canon_copy_from_read_buf(tty, &kb, &nr)) + /* + * If we have filled the user buffer, see + * if we should skip an EOF character before + * releasing the lock and returning done. + */ + if (!nr) + canon_skip_eof(tty); + else if (canon_copy_from_read_buf(tty, &kb, &nr)) return kb - kbuf; } else { if (copy_from_read_buf(tty, &kb, &nr)) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index a8830e15a22c..696030cfcb09 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -17,6 +17,8 @@ struct uart_8250_dma { int (*tx_dma)(struct uart_8250_port *p); int (*rx_dma)(struct uart_8250_port *p); + void (*prepare_tx_dma)(struct uart_8250_port *p); + void (*prepare_rx_dma)(struct uart_8250_port *p); /* Filter function */ dma_filter_fn fn; @@ -83,6 +85,7 @@ struct serial8250_config { #define UART_CAP_MINI BIT(17) /* Mini UART on BCM283X family lacks: * STOP PARITY EPAR SPAR WLEN5 WLEN6 */ +#define UART_CAP_NOTEMT BIT(18) /* UART without interrupt on TEMT available */ #define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN BIT(1) /* UART has buggy TX IIR status */ @@ -120,6 +123,28 @@ static inline void serial_out(struct uart_8250_port *up, int offset, int value) up->port.serial_out(&up->port, offset, value); } +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_8250_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +static unsigned int __maybe_unused serial_icr_read(struct uart_8250_port *up, + int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} + void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p); static inline int serial_dl_read(struct uart_8250_port *up) @@ -302,6 +327,22 @@ extern int serial8250_rx_dma(struct uart_8250_port *); extern void serial8250_rx_dma_flush(struct uart_8250_port *); extern int serial8250_request_dma(struct uart_8250_port *); extern void serial8250_release_dma(struct uart_8250_port *); + +static inline void serial8250_do_prepare_tx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + if (dma->prepare_tx_dma) + dma->prepare_tx_dma(p); +} + +static inline void serial8250_do_prepare_rx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + if (dma->prepare_rx_dma) + dma->prepare_rx_dma(p); +} #else static inline int serial8250_tx_dma(struct uart_8250_port *p) { diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 93fe10c680fb..9d2a7856784f 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -429,6 +429,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev) timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; memset(&port, 0, sizeof(port)); port.port.private_data = vuart; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 01d30f6ed8fb..cfbd2de0ca6e 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -32,7 +32,6 @@ #include <linux/mutex.h> #include <linux/slab.h> #include <linux/uaccess.h> -#include <linux/pm_runtime.h> #include <linux/io.h> #ifdef CONFIG_SPARC #include <linux/sunserialcore.h> diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index b3c3f7e5851a..7133fceed35e 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -34,7 +34,7 @@ static void __dma_tx_complete(void *param) uart_write_wakeup(&p->port); ret = serial8250_tx_dma(p); - if (ret) + if (ret || !dma->tx_running) serial8250_set_THRI(p); spin_unlock_irqrestore(&p->port.lock, flags); @@ -80,12 +80,13 @@ int serial8250_tx_dma(struct uart_8250_port *p) if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { /* We have been called from __dma_tx_complete() */ - serial8250_rpm_put_tx(p); return 0; } dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + serial8250_do_prepare_tx_dma(p); + desc = dmaengine_prep_slave_single(dma->txchan, dma->tx_addr + xmit->tail, dma->tx_size, DMA_MEM_TO_DEV, @@ -123,6 +124,8 @@ int serial8250_rx_dma(struct uart_8250_port *p) if (dma->rx_running) return 0; + serial8250_do_prepare_rx_dma(p); + desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 1769808031c5..f57bbd32ef11 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -12,13 +12,13 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/io.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/workqueue.h> #include <linux/notifier.h> #include <linux/slab.h> @@ -33,30 +33,28 @@ /* Offsets for the DesignWare specific registers */ #define DW_UART_USR 0x1f /* UART Status Register */ +#define DW_UART_DMASA 0xa8 /* DMA Software Ack */ + +#define OCTEON_UART_USR 0x27 /* UART Status Register */ + +#define RZN1_UART_TDMACR 0x10c /* DMA Control Register Transmit Mode */ +#define RZN1_UART_RDMACR 0x110 /* DMA Control Register Receive Mode */ /* DesignWare specific register fields */ #define DW_UART_MCR_SIRE BIT(6) -struct dw8250_data { - struct dw8250_port_data data; +/* Renesas specific register fields */ +#define RZN1_UART_xDMACR_DMA_EN BIT(0) +#define RZN1_UART_xDMACR_1_WORD_BURST (0 << 1) +#define RZN1_UART_xDMACR_4_WORD_BURST (1 << 1) +#define RZN1_UART_xDMACR_8_WORD_BURST (3 << 1) +#define RZN1_UART_xDMACR_BLK_SZ(x) ((x) << 3) - u8 usr_reg; - int msr_mask_on; - int msr_mask_off; - struct clk *clk; - struct clk *pclk; - struct notifier_block clk_notifier; - struct work_struct clk_work; - struct reset_control *rst; - - unsigned int skip_autocfg:1; - unsigned int uart_16550_compatible:1; -}; - -static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) -{ - return container_of(data, struct dw8250_data, data); -} +/* Quirks */ +#define DW_UART_QUIRK_OCTEON BIT(0) +#define DW_UART_QUIRK_ARMADA_38X BIT(1) +#define DW_UART_QUIRK_SKIP_SET_RATE BIT(2) +#define DW_UART_QUIRK_IS_DMA_FC BIT(3) static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) { @@ -238,6 +236,8 @@ static int dw8250_handle_irq(struct uart_port *p) struct uart_8250_port *up = up_to_u8250p(p); struct dw8250_data *d = to_dw8250_data(p->private_data); unsigned int iir = p->serial_in(p, UART_IIR); + bool rx_timeout = (iir & 0x3f) == UART_IIR_RX_TIMEOUT; + unsigned int quirks = d->pdata->quirks; unsigned int status; unsigned long flags; @@ -251,7 +251,7 @@ static int dw8250_handle_irq(struct uart_port *p) * This problem has only been observed so far when not in DMA mode * so we limit the workaround only to non-DMA mode. */ - if (!up->dma && ((iir & 0x3f) == UART_IIR_RX_TIMEOUT)) { + if (!up->dma && rx_timeout) { spin_lock_irqsave(&p->lock, flags); status = p->serial_in(p, UART_LSR); @@ -261,12 +261,21 @@ static int dw8250_handle_irq(struct uart_port *p) spin_unlock_irqrestore(&p->lock, flags); } + /* Manually stop the Rx DMA transfer when acting as flow controller */ + if (quirks & DW_UART_QUIRK_IS_DMA_FC && up->dma && up->dma->rx_running && rx_timeout) { + status = p->serial_in(p, UART_LSR); + if (status & (UART_LSR_DR | UART_LSR_BI)) { + dw8250_writel_ext(p, RZN1_UART_RDMACR, 0); + dw8250_writel_ext(p, DW_UART_DMASA, 1); + } + } + if (serial8250_handle_irq(p, iir)) return 1; if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { /* Clear the USR */ - (void)p->serial_in(p, d->usr_reg); + (void)p->serial_in(p, d->pdata->usr_reg); return 1; } @@ -384,11 +393,48 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param) return param == chan->device->dev; } +static u32 dw8250_rzn1_get_dmacr_burst(int max_burst) +{ + if (max_burst >= 8) + return RZN1_UART_xDMACR_8_WORD_BURST; + else if (max_burst >= 4) + return RZN1_UART_xDMACR_4_WORD_BURST; + else + return RZN1_UART_xDMACR_1_WORD_BURST; +} + +static void dw8250_prepare_tx_dma(struct uart_8250_port *p) +{ + struct uart_port *up = &p->port; + struct uart_8250_dma *dma = p->dma; + u32 val; + + dw8250_writel_ext(up, RZN1_UART_TDMACR, 0); + val = dw8250_rzn1_get_dmacr_burst(dma->txconf.dst_maxburst) | + RZN1_UART_xDMACR_BLK_SZ(dma->tx_size) | + RZN1_UART_xDMACR_DMA_EN; + dw8250_writel_ext(up, RZN1_UART_TDMACR, val); +} + +static void dw8250_prepare_rx_dma(struct uart_8250_port *p) +{ + struct uart_port *up = &p->port; + struct uart_8250_dma *dma = p->dma; + u32 val; + + dw8250_writel_ext(up, RZN1_UART_RDMACR, 0); + val = dw8250_rzn1_get_dmacr_burst(dma->rxconf.src_maxburst) | + RZN1_UART_xDMACR_BLK_SZ(dma->rx_size) | + RZN1_UART_xDMACR_DMA_EN; + dw8250_writel_ext(up, RZN1_UART_RDMACR, val); +} + static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { struct device_node *np = p->dev->of_node; if (np) { + unsigned int quirks = data->pdata->quirks; int id; /* get index of serial line, if found in DT aliases */ @@ -396,12 +442,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) if (id >= 0) p->line = id; #ifdef CONFIG_64BIT - if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) { + if (quirks & DW_UART_QUIRK_OCTEON) { p->serial_in = dw8250_serial_inq; p->serial_out = dw8250_serial_outq; p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; p->type = PORT_OCTEON; - data->usr_reg = 0x27; data->skip_autocfg = true; } #endif @@ -412,10 +457,16 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) p->serial_out = dw8250_serial_out32be; } - if (of_device_is_compatible(np, "marvell,armada-38x-uart")) + if (quirks & DW_UART_QUIRK_ARMADA_38X) p->serial_out = dw8250_serial_out38x; - if (of_device_is_compatible(np, "starfive,jh7100-uart")) + if (quirks & DW_UART_QUIRK_SKIP_SET_RATE) p->set_termios = dw8250_do_set_termios; + if (quirks & DW_UART_QUIRK_IS_DMA_FC) { + data->data.dma.txconf.device_fc = 1; + data->data.dma.rxconf.device_fc = 1; + data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma; + data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma; + } } else if (acpi_dev_present("APMC0D08", NULL, -1)) { p->iotype = UPIO_MEM32; @@ -433,21 +484,30 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) } } +static void dw8250_clk_disable_unprepare(void *data) +{ + clk_disable_unprepare(data); +} + +static void dw8250_reset_control_assert(void *data) +{ + reset_control_assert(data); +} + static int dw8250_probe(struct platform_device *pdev) { struct uart_8250_port uart = {}, *up = &uart; - struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct uart_port *p = &up->port; struct device *dev = &pdev->dev; struct dw8250_data *data; + struct resource *regs; int irq; int err; u32 val; - if (!regs) { - dev_err(dev, "no registers defined\n"); - return -EINVAL; - } + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return dev_err_probe(dev, -EINVAL, "no registers defined\n"); irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -476,7 +536,7 @@ static int dw8250_probe(struct platform_device *pdev) return -ENOMEM; data->data.dma.fn = dw8250_fallback_dma_filter; - data->usr_reg = DW_UART_USR; + data->pdata = device_get_match_data(p->dev); p->private_data = &data->data; data->uart_16550_compatible = device_property_read_bool(dev, @@ -532,37 +592,41 @@ static int dw8250_probe(struct platform_device *pdev) err = clk_prepare_enable(data->clk); if (err) - dev_warn(dev, "could not enable optional baudclk: %d\n", err); + return dev_err_probe(dev, err, "could not enable optional baudclk\n"); + + err = devm_add_action_or_reset(dev, dw8250_clk_disable_unprepare, data->clk); + if (err) + return err; if (data->clk) p->uartclk = clk_get_rate(data->clk); /* If no clock rate is defined, fail. */ - if (!p->uartclk) { - dev_err(dev, "clock rate not defined\n"); - err = -EINVAL; - goto err_clk; - } + if (!p->uartclk) + return dev_err_probe(dev, -EINVAL, "clock rate not defined\n"); data->pclk = devm_clk_get_optional(dev, "apb_pclk"); - if (IS_ERR(data->pclk)) { - err = PTR_ERR(data->pclk); - goto err_clk; - } + if (IS_ERR(data->pclk)) + return PTR_ERR(data->pclk); err = clk_prepare_enable(data->pclk); - if (err) { - dev_err(dev, "could not enable apb_pclk\n"); - goto err_clk; - } + if (err) + return dev_err_probe(dev, err, "could not enable apb_pclk\n"); + + err = devm_add_action_or_reset(dev, dw8250_clk_disable_unprepare, data->pclk); + if (err) + return err; data->rst = devm_reset_control_get_optional_exclusive(dev, NULL); - if (IS_ERR(data->rst)) { - err = PTR_ERR(data->rst); - goto err_pclk; - } + if (IS_ERR(data->rst)) + return PTR_ERR(data->rst); + reset_control_deassert(data->rst); + err = devm_add_action_or_reset(dev, dw8250_reset_control_assert, data->rst); + if (err) + return err; + dw8250_quirks(p, data); /* If the Busy Functionality is not implemented, don't handle it */ @@ -580,10 +644,8 @@ static int dw8250_probe(struct platform_device *pdev) } data->data.line = serial8250_register_8250_port(up); - if (data->data.line < 0) { - err = data->data.line; - goto err_reset; - } + if (data->data.line < 0) + return data->data.line; /* * Some platforms may provide a reference clock shared between several @@ -593,9 +655,8 @@ static int dw8250_probe(struct platform_device *pdev) if (data->clk) { err = clk_notifier_register(data->clk, &data->clk_notifier); if (err) - dev_warn(p->dev, "Failed to set the clock notifier\n"); - else - queue_work(system_unbound_wq, &data->clk_work); + return dev_err_probe(dev, err, "Failed to set the clock notifier\n"); + queue_work(system_unbound_wq, &data->clk_work); } platform_set_drvdata(pdev, data); @@ -604,17 +665,6 @@ static int dw8250_probe(struct platform_device *pdev) pm_runtime_enable(dev); return 0; - -err_reset: - reset_control_assert(data->rst); - -err_pclk: - clk_disable_unprepare(data->pclk); - -err_clk: - clk_disable_unprepare(data->clk); - - return err; } static int dw8250_remove(struct platform_device *pdev) @@ -632,12 +682,6 @@ static int dw8250_remove(struct platform_device *pdev) serial8250_unregister_port(data->data.line); - reset_control_assert(data->rst); - - clk_disable_unprepare(data->pclk); - - clk_disable_unprepare(data->clk); - pm_runtime_disable(dev); pm_runtime_put_noidle(dev); @@ -693,12 +737,37 @@ static const struct dev_pm_ops dw8250_pm_ops = { SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL) }; +static const struct dw8250_platform_data dw8250_dw_apb = { + .usr_reg = DW_UART_USR, +}; + +static const struct dw8250_platform_data dw8250_octeon_3860_data = { + .usr_reg = OCTEON_UART_USR, + .quirks = DW_UART_QUIRK_OCTEON, +}; + +static const struct dw8250_platform_data dw8250_armada_38x_data = { + .usr_reg = DW_UART_USR, + .quirks = DW_UART_QUIRK_ARMADA_38X, +}; + +static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { + .usr_reg = DW_UART_USR, + .cpr_val = 0x00012f32, + .quirks = DW_UART_QUIRK_IS_DMA_FC, +}; + +static const struct dw8250_platform_data dw8250_starfive_jh7100_data = { + .usr_reg = DW_UART_USR, + .quirks = DW_UART_QUIRK_SKIP_SET_RATE, +}; + static const struct of_device_id dw8250_of_match[] = { - { .compatible = "snps,dw-apb-uart" }, - { .compatible = "cavium,octeon-3860-uart" }, - { .compatible = "marvell,armada-38x-uart" }, - { .compatible = "renesas,rzn1-uart" }, - { .compatible = "starfive,jh7100-uart" }, + { .compatible = "snps,dw-apb-uart", .data = &dw8250_dw_apb }, + { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data }, + { .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data }, + { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data }, + { .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, dw8250_of_match); diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index 622d3b0d89e7..fbabfdd8c7b8 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -2,19 +2,32 @@ /* Synopsys DesignWare 8250 library. */ #include <linux/bitops.h> +#include <linux/bitfield.h> #include <linux/device.h> -#include <linux/io.h> #include <linux/kernel.h> +#include <linux/property.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include "8250_dwlib.h" /* Offsets for the DesignWare specific registers */ +#define DW_UART_TCR 0xac /* Transceiver Control Register (RS485) */ +#define DW_UART_DE_EN 0xb0 /* Driver Output Enable Register */ +#define DW_UART_RE_EN 0xb4 /* Receiver Output Enable Register */ #define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */ #define DW_UART_CPR 0xf4 /* Component Parameter Register */ #define DW_UART_UCV 0xf8 /* UART Component Version */ +/* Transceiver Control Register bits */ +#define DW_UART_TCR_RS485_EN BIT(0) +#define DW_UART_TCR_RE_POL BIT(1) +#define DW_UART_TCR_DE_POL BIT(2) +#define DW_UART_TCR_XFER_MODE GENMASK(4, 3) +#define DW_UART_TCR_XFER_MODE_DE_DURING_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 0) +#define DW_UART_TCR_XFER_MODE_SW_DE_OR_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 1) +#define DW_UART_TCR_XFER_MODE_DE_OR_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 2) + /* Component Parameter Register bits */ #define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0) #define DW_UART_CPR_AFCE_MODE (1 << 4) @@ -32,21 +45,6 @@ /* Helper for FIFO size calculation */ #define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16) -static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) -{ - if (p->iotype == UPIO_MEM32BE) - return ioread32be(p->membase + offset); - return readl(p->membase + offset); -} - -static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg) -{ - if (p->iotype == UPIO_MEM32BE) - iowrite32be(reg, p->membase + offset); - else - writel(reg, p->membase + offset); -} - /* * divisor = div(I) + div(F) * "I" means integer, "F" means fractional @@ -87,11 +85,87 @@ void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct } EXPORT_SYMBOL_GPL(dw8250_do_set_termios); +static int dw8250_rs485_config(struct uart_port *p, struct serial_rs485 *rs485) +{ + u32 tcr; + + tcr = dw8250_readl_ext(p, DW_UART_TCR); + tcr &= ~DW_UART_TCR_XFER_MODE; + + if (rs485->flags & SER_RS485_ENABLED) { + /* Clear unsupported flags. */ + rs485->flags &= SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | + SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND; + tcr |= DW_UART_TCR_RS485_EN; + + if (rs485->flags & SER_RS485_RX_DURING_TX) { + tcr |= DW_UART_TCR_XFER_MODE_DE_DURING_RE; + } else { + /* HW does not support same DE level for tx and rx */ + if (!(rs485->flags & SER_RS485_RTS_ON_SEND) == + !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) + return -EINVAL; + + tcr |= DW_UART_TCR_XFER_MODE_DE_OR_RE; + } + dw8250_writel_ext(p, DW_UART_DE_EN, 1); + dw8250_writel_ext(p, DW_UART_RE_EN, 1); + } else { + rs485->flags = 0; + + tcr &= ~DW_UART_TCR_RS485_EN; + } + + /* Reset to default polarity */ + tcr |= DW_UART_TCR_DE_POL; + tcr &= ~DW_UART_TCR_RE_POL; + + if (!(rs485->flags & SER_RS485_RTS_ON_SEND)) + tcr &= ~DW_UART_TCR_DE_POL; + if (device_property_read_bool(p->dev, "rs485-rx-active-high")) + tcr |= DW_UART_TCR_RE_POL; + + dw8250_writel_ext(p, DW_UART_TCR, tcr); + + rs485->delay_rts_before_send = 0; + rs485->delay_rts_after_send = 0; + + p->rs485 = *rs485; + + return 0; +} + +/* + * Tests if RE_EN register can have non-zero value to see if RS-485 HW support + * is present. + */ +static bool dw8250_detect_rs485_hw(struct uart_port *p) +{ + u32 reg; + + dw8250_writel_ext(p, DW_UART_RE_EN, 1); + reg = dw8250_readl_ext(p, DW_UART_RE_EN); + dw8250_writel_ext(p, DW_UART_RE_EN, 0); + return reg; +} + void dw8250_setup_port(struct uart_port *p) { + struct dw8250_port_data *pd = p->private_data; + struct dw8250_data *data = to_dw8250_data(pd); struct uart_8250_port *up = up_to_u8250p(p); u32 reg; + pd->hw_rs485_support = dw8250_detect_rs485_hw(p); + if (pd->hw_rs485_support) { + p->rs485_config = dw8250_rs485_config; + } else { + p->rs485_config = serial8250_em485_config; + up->rs485_start_tx = serial8250_em485_start_tx; + up->rs485_stop_tx = serial8250_em485_stop_tx; + } + up->capabilities |= UART_CAP_NOTEMT; + /* * If the Component Version Register returns zero, we know that * ADDITIONAL_FEATURES are not enabled. No need to go any further. @@ -108,14 +182,16 @@ void dw8250_setup_port(struct uart_port *p) dw8250_writel_ext(p, DW_UART_DLF, 0); if (reg) { - struct dw8250_port_data *d = p->private_data; - - d->dlf_size = fls(reg); + pd->dlf_size = fls(reg); p->get_divisor = dw8250_get_divisor; p->set_divisor = dw8250_set_divisor; } reg = dw8250_readl_ext(p, DW_UART_CPR); + if (!reg) { + reg = data->pdata->cpr_val; + dev_dbg(p->dev, "CPR is not available, using 0x%08x instead\n", reg); + } if (!reg) return; @@ -124,7 +200,7 @@ void dw8250_setup_port(struct uart_port *p) p->type = PORT_16550A; p->flags |= UPF_FIXED_TYPE; p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); - up->capabilities = UART_CAP_FIFO; + up->capabilities = UART_CAP_FIFO | UART_CAP_NOTEMT; } if (reg & DW_UART_CPR_AFCE_MODE) diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index 83d528e5cc21..055bfdc87985 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -1,10 +1,16 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* Synopsys DesignWare 8250 library header file. */ +#include <linux/io.h> +#include <linux/notifier.h> #include <linux/types.h> +#include <linux/workqueue.h> #include "8250.h" +struct clk; +struct reset_control; + struct dw8250_port_data { /* Port properties */ int line; @@ -14,7 +20,52 @@ struct dw8250_port_data { /* Hardware configuration */ u8 dlf_size; + + /* RS485 variables */ + bool hw_rs485_support; +}; + +struct dw8250_platform_data { + u8 usr_reg; + u32 cpr_val; + unsigned int quirks; +}; + +struct dw8250_data { + struct dw8250_port_data data; + const struct dw8250_platform_data *pdata; + + int msr_mask_on; + int msr_mask_off; + struct clk *clk; + struct clk *pclk; + struct notifier_block clk_notifier; + struct work_struct clk_work; + struct reset_control *rst; + + unsigned int skip_autocfg:1; + unsigned int uart_16550_compatible:1; }; void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old); void dw8250_setup_port(struct uart_port *p); + +static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) +{ + return container_of(data, struct dw8250_data, data); +} + +static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) +{ + if (p->iotype == UPIO_MEM32BE) + return ioread32be(p->membase + offset); + return readl(p->membase + offset); +} + +static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg) +{ + if (p->iotype == UPIO_MEM32BE) + iowrite32be(reg, p->membase + offset); + else + writel(reg, p->membase + offset); +} diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index 251f0018ae8c..dba5950b8d0e 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -200,12 +200,12 @@ static int fintek_8250_rs485_config(struct uart_port *port, if (!pdata) return -EINVAL; - /* Hardware do not support same RTS level on send and receive */ - if (!(rs485->flags & SER_RS485_RTS_ON_SEND) == - !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) - return -EINVAL; if (rs485->flags & SER_RS485_ENABLED) { + /* Hardware do not support same RTS level on send and receive */ + if (!(rs485->flags & SER_RS485_RTS_ON_SEND) == + !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) + return -EINVAL; memset(rs485->padding, 0, sizeof(rs485->padding)); config |= RS485_URA; } else { diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 21053db93ff1..54051ec7b499 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -54,9 +54,6 @@ #define MTK_UART_TX_TRIGGER 1 #define MTK_UART_RX_TRIGGER MTK_UART_RX_SIZE -#define MTK_UART_FEATURE_SEL 39 /* Feature Selection register */ -#define MTK_UART_FEAT_NEWRMAP BIT(0) /* Use new register map */ - #define MTK_UART_XON1 40 /* I/O: Xon character 1 */ #define MTK_UART_XOFF1 42 /* I/O: Xoff character 1 */ @@ -575,10 +572,6 @@ static int mtk8250_probe(struct platform_device *pdev) uart.dma = data->dma; #endif - /* Set AP UART new register map */ - writel(MTK_UART_FEAT_NEWRMAP, uart.port.membase + - (MTK_UART_FEATURE_SEL << uart.port.regshift)); - /* Disable Rate Fix function */ writel(0x0, uart.port.membase + (MTK_UART_RATE_FIX << uart.port.regshift)); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index be8626234627..5a699a1aa79c 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -326,6 +326,8 @@ static const struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_ALTR_16550_F64, }, { .compatible = "altr,16550-FIFO128", .data = (void *)PORT_ALTR_16550_F128, }, + { .compatible = "fsl,16550-FIFO64", + .data = (void *)PORT_16550A_FSL64, }, { .compatible = "mediatek,mtk-btif", .data = (void *)PORT_MTK_BTIF, }, { .compatible = "mrvl,mmp-uart", diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index a293e9f107d0..a17619db7939 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -11,6 +11,7 @@ #include <linux/pci.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/math.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/tty.h> @@ -994,41 +995,29 @@ static void pci_ite887x_exit(struct pci_dev *dev) } /* - * EndRun Technologies. - * Determine the number of ports available on the device. + * Oxford Semiconductor Inc. + * Check if an OxSemi device is part of the Tornado range of devices. */ #define PCI_VENDOR_ID_ENDRUN 0x7401 #define PCI_DEVICE_ID_ENDRUN_1588 0xe100 -static int pci_endrun_init(struct pci_dev *dev) +static bool pci_oxsemi_tornado_p(struct pci_dev *dev) { - u8 __iomem *p; - unsigned long deviceID; - unsigned int number_uarts = 0; + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xf000) != 0xc000) + return false; - /* EndRun device is all 0xexxx */ + /* EndRun devices are all 0xExxx */ if (dev->vendor == PCI_VENDOR_ID_ENDRUN && - (dev->device & 0xf000) != 0xe000) - return 0; - - p = pci_iomap(dev, 0, 5); - if (p == NULL) - return -ENOMEM; + (dev->device & 0xf000) != 0xe000) + return false; - deviceID = ioread32(p); - /* EndRun device */ - if (deviceID == 0x07000200) { - number_uarts = ioread8(p + 4); - pci_dbg(dev, "%d ports detected on EndRun PCI Express device\n", number_uarts); - } - pci_iounmap(dev, p); - return number_uarts; + return true; } /* - * Oxford Semiconductor Inc. - * Check that device is part of the Tornado range of devices, then determine - * the number of ports available on the device. + * Determine the number of ports available on a Tornado device. */ static int pci_oxsemi_tornado_init(struct pci_dev *dev) { @@ -1036,9 +1025,7 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev) unsigned long deviceID; unsigned int number_uarts = 0; - /* OxSemi Tornado devices are all 0xCxxx */ - if (dev->vendor == PCI_VENDOR_ID_OXSEMI && - (dev->device & 0xF000) != 0xC000) + if (!pci_oxsemi_tornado_p(dev)) return 0; p = pci_iomap(dev, 0, 5); @@ -1049,12 +1036,217 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev) /* Tornado device */ if (deviceID == 0x07000200) { number_uarts = ioread8(p + 4); - pci_dbg(dev, "%d ports detected on Oxford PCI Express device\n", number_uarts); + pci_dbg(dev, "%d ports detected on %s PCI Express device\n", + number_uarts, + dev->vendor == PCI_VENDOR_ID_ENDRUN ? + "EndRun" : "Oxford"); } pci_iounmap(dev, p); return number_uarts; } +/* Tornado-specific constants for the TCR and CPR registers; see below. */ +#define OXSEMI_TORNADO_TCR_MASK 0xf +#define OXSEMI_TORNADO_CPR_MASK 0x1ff +#define OXSEMI_TORNADO_CPR_MIN 0x008 +#define OXSEMI_TORNADO_CPR_DEF 0x10f + +/* + * Determine the oversampling rate, the clock prescaler, and the clock + * divisor for the requested baud rate. The clock rate is 62.5 MHz, + * which is four times the baud base, and the prescaler increments in + * steps of 1/8. Therefore to make calculations on integers we need + * to use a scaled clock rate, which is the baud base multiplied by 32 + * (or our assumed UART clock rate multiplied by 2). + * + * The allowed oversampling rates are from 4 up to 16 inclusive (values + * from 0 to 3 inclusive map to 16). Likewise the clock prescaler allows + * values between 1.000 and 63.875 inclusive (operation for values from + * 0.000 to 0.875 has not been specified). The clock divisor is the usual + * unsigned 16-bit integer. + * + * For the most accurate baud rate we use a table of predetermined + * oversampling rates and clock prescalers that records all possible + * products of the two parameters in the range from 4 up to 255 inclusive, + * and additionally 335 for the 1500000bps rate, with the prescaler scaled + * by 8. The table is sorted by the decreasing value of the oversampling + * rate and ties are resolved by sorting by the decreasing value of the + * product. This way preference is given to higher oversampling rates. + * + * We iterate over the table and choose the product of an oversampling + * rate and a clock prescaler that gives the lowest integer division + * result deviation, or if an exact integer divider is found we stop + * looking for it right away. We do some fixup if the resulting clock + * divisor required would be out of its unsigned 16-bit integer range. + * + * Finally we abuse the supposed fractional part returned to encode the + * 4-bit value of the oversampling rate and the 9-bit value of the clock + * prescaler which will end up in the TCR and CPR/CPR2 registers. + */ +static unsigned int pci_oxsemi_tornado_get_divisor(struct uart_port *port, + unsigned int baud, + unsigned int *frac) +{ + static u8 p[][2] = { + { 16, 14, }, { 16, 13, }, { 16, 12, }, { 16, 11, }, + { 16, 10, }, { 16, 9, }, { 16, 8, }, { 15, 17, }, + { 15, 16, }, { 15, 15, }, { 15, 14, }, { 15, 13, }, + { 15, 12, }, { 15, 11, }, { 15, 10, }, { 15, 9, }, + { 15, 8, }, { 14, 18, }, { 14, 17, }, { 14, 14, }, + { 14, 13, }, { 14, 12, }, { 14, 11, }, { 14, 10, }, + { 14, 9, }, { 14, 8, }, { 13, 19, }, { 13, 18, }, + { 13, 17, }, { 13, 13, }, { 13, 12, }, { 13, 11, }, + { 13, 10, }, { 13, 9, }, { 13, 8, }, { 12, 19, }, + { 12, 18, }, { 12, 17, }, { 12, 11, }, { 12, 9, }, + { 12, 8, }, { 11, 23, }, { 11, 22, }, { 11, 21, }, + { 11, 20, }, { 11, 19, }, { 11, 18, }, { 11, 17, }, + { 11, 11, }, { 11, 10, }, { 11, 9, }, { 11, 8, }, + { 10, 25, }, { 10, 23, }, { 10, 20, }, { 10, 19, }, + { 10, 17, }, { 10, 10, }, { 10, 9, }, { 10, 8, }, + { 9, 27, }, { 9, 23, }, { 9, 21, }, { 9, 19, }, + { 9, 18, }, { 9, 17, }, { 9, 9, }, { 9, 8, }, + { 8, 31, }, { 8, 29, }, { 8, 23, }, { 8, 19, }, + { 8, 17, }, { 8, 8, }, { 7, 35, }, { 7, 31, }, + { 7, 29, }, { 7, 25, }, { 7, 23, }, { 7, 21, }, + { 7, 19, }, { 7, 17, }, { 7, 15, }, { 7, 14, }, + { 7, 13, }, { 7, 12, }, { 7, 11, }, { 7, 10, }, + { 7, 9, }, { 7, 8, }, { 6, 41, }, { 6, 37, }, + { 6, 31, }, { 6, 29, }, { 6, 23, }, { 6, 19, }, + { 6, 17, }, { 6, 13, }, { 6, 11, }, { 6, 10, }, + { 6, 9, }, { 6, 8, }, { 5, 67, }, { 5, 47, }, + { 5, 43, }, { 5, 41, }, { 5, 37, }, { 5, 31, }, + { 5, 29, }, { 5, 25, }, { 5, 23, }, { 5, 19, }, + { 5, 17, }, { 5, 15, }, { 5, 13, }, { 5, 11, }, + { 5, 10, }, { 5, 9, }, { 5, 8, }, { 4, 61, }, + { 4, 59, }, { 4, 53, }, { 4, 47, }, { 4, 43, }, + { 4, 41, }, { 4, 37, }, { 4, 31, }, { 4, 29, }, + { 4, 23, }, { 4, 19, }, { 4, 17, }, { 4, 13, }, + { 4, 9, }, { 4, 8, }, + }; + /* Scale the quotient for comparison to get the fractional part. */ + const unsigned int quot_scale = 65536; + unsigned int sclk = port->uartclk * 2; + unsigned int sdiv = DIV_ROUND_CLOSEST(sclk, baud); + unsigned int best_squot; + unsigned int squot; + unsigned int quot; + u16 cpr; + u8 tcr; + int i; + + /* Old custom speed handling. */ + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) { + unsigned int cust_div = port->custom_divisor; + + quot = cust_div & UART_DIV_MAX; + tcr = (cust_div >> 16) & OXSEMI_TORNADO_TCR_MASK; + cpr = (cust_div >> 20) & OXSEMI_TORNADO_CPR_MASK; + if (cpr < OXSEMI_TORNADO_CPR_MIN) + cpr = OXSEMI_TORNADO_CPR_DEF; + } else { + best_squot = quot_scale; + for (i = 0; i < ARRAY_SIZE(p); i++) { + unsigned int spre; + unsigned int srem; + u8 cp; + u8 tc; + + tc = p[i][0]; + cp = p[i][1]; + spre = tc * cp; + + srem = sdiv % spre; + if (srem > spre / 2) + srem = spre - srem; + squot = DIV_ROUND_CLOSEST(srem * quot_scale, spre); + + if (srem == 0) { + tcr = tc; + cpr = cp; + quot = sdiv / spre; + break; + } else if (squot < best_squot) { + best_squot = squot; + tcr = tc; + cpr = cp; + quot = DIV_ROUND_CLOSEST(sdiv, spre); + } + } + while (tcr <= (OXSEMI_TORNADO_TCR_MASK + 1) >> 1 && + quot % 2 == 0) { + quot >>= 1; + tcr <<= 1; + } + while (quot > UART_DIV_MAX) { + if (tcr <= (OXSEMI_TORNADO_TCR_MASK + 1) >> 1) { + quot >>= 1; + tcr <<= 1; + } else if (cpr <= OXSEMI_TORNADO_CPR_MASK >> 1) { + quot >>= 1; + cpr <<= 1; + } else { + quot = quot * cpr / OXSEMI_TORNADO_CPR_MASK; + cpr = OXSEMI_TORNADO_CPR_MASK; + } + } + } + + *frac = (cpr << 8) | (tcr & OXSEMI_TORNADO_TCR_MASK); + return quot; +} + +/* + * Set the oversampling rate in the transmitter clock cycle register (TCR), + * the clock prescaler in the clock prescaler register (CPR and CPR2), and + * the clock divisor in the divisor latch (DLL and DLM). Note that for + * backwards compatibility any write to CPR clears CPR2 and therefore CPR + * has to be written first, followed by CPR2, which occupies the location + * of CKS used with earlier UART designs. + */ +static void pci_oxsemi_tornado_set_divisor(struct uart_port *port, + unsigned int baud, + unsigned int quot, + unsigned int quot_frac) +{ + struct uart_8250_port *up = up_to_u8250p(port); + u8 cpr2 = quot_frac >> 16; + u8 cpr = quot_frac >> 8; + u8 tcr = quot_frac; + + serial_icr_write(up, UART_TCR, tcr); + serial_icr_write(up, UART_CPR, cpr); + serial_icr_write(up, UART_CKS, cpr2); + serial8250_do_set_divisor(port, baud, quot, 0); +} + +/* + * For Tornado devices we force MCR[7] set for the Divide-by-M N/8 baud rate + * generator prescaler (CPR and CPR2). Otherwise no prescaler would be used. + */ +static void pci_oxsemi_tornado_set_mctrl(struct uart_port *port, + unsigned int mctrl) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + up->mcr |= UART_MCR_CLKSEL; + serial8250_do_set_mctrl(port, mctrl); +} + +static int pci_oxsemi_tornado_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *up, int idx) +{ + struct pci_dev *dev = priv->dev; + + if (pci_oxsemi_tornado_p(dev)) { + up->port.get_divisor = pci_oxsemi_tornado_get_divisor; + up->port.set_divisor = pci_oxsemi_tornado_set_divisor; + up->port.set_mctrl = pci_oxsemi_tornado_set_mctrl; + } + + return pci_default_setup(priv, board, up, idx); +} + static int pci_asix_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -2244,7 +2436,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .device = PCI_ANY_ID, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .init = pci_endrun_init, + .init = pci_oxsemi_tornado_init, .setup = pci_default_setup, }, /* @@ -2256,7 +2448,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .init = pci_oxsemi_tornado_init, - .setup = pci_default_setup, + .setup = pci_oxsemi_tornado_setup, }, { .vendor = PCI_VENDOR_ID_MAINPINE, @@ -2264,7 +2456,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .init = pci_oxsemi_tornado_init, - .setup = pci_default_setup, + .setup = pci_oxsemi_tornado_setup, }, { .vendor = PCI_VENDOR_ID_DIGI, @@ -2272,7 +2464,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .subvendor = PCI_SUBVENDOR_ID_IBM, .subdevice = PCI_ANY_ID, .init = pci_oxsemi_tornado_init, - .setup = pci_default_setup, + .setup = pci_oxsemi_tornado_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, @@ -2589,7 +2781,7 @@ enum pci_board_num_t { pbn_b0_2_1843200, pbn_b0_4_1843200, - pbn_b0_1_3906250, + pbn_b0_1_15625000, pbn_b0_bt_1_115200, pbn_b0_bt_2_115200, @@ -2667,12 +2859,11 @@ enum pci_board_num_t { pbn_panacom2, pbn_panacom4, pbn_plx_romulus, - pbn_endrun_2_3906250, pbn_oxsemi, - pbn_oxsemi_1_3906250, - pbn_oxsemi_2_3906250, - pbn_oxsemi_4_3906250, - pbn_oxsemi_8_3906250, + pbn_oxsemi_1_15625000, + pbn_oxsemi_2_15625000, + pbn_oxsemi_4_15625000, + pbn_oxsemi_8_15625000, pbn_intel_i960, pbn_sgi_ioc3, pbn_computone_4, @@ -2815,10 +3006,10 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 8, }, - [pbn_b0_1_3906250] = { + [pbn_b0_1_15625000] = { .flags = FL_BASE0, .num_ports = 1, - .base_baud = 3906250, + .base_baud = 15625000, .uart_offset = 8, }, @@ -3190,20 +3381,6 @@ static struct pciserial_board pci_boards[] = { }, /* - * EndRun Technologies - * Uses the size of PCI Base region 0 to - * signal now many ports are available - * 2 port 952 Uart support - */ - [pbn_endrun_2_3906250] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - - /* * This board uses the size of PCI Base region 0 to * signal now many ports are available */ @@ -3213,31 +3390,31 @@ static struct pciserial_board pci_boards[] = { .base_baud = 115200, .uart_offset = 8, }, - [pbn_oxsemi_1_3906250] = { + [pbn_oxsemi_1_15625000] = { .flags = FL_BASE0, .num_ports = 1, - .base_baud = 3906250, + .base_baud = 15625000, .uart_offset = 0x200, .first_offset = 0x1000, }, - [pbn_oxsemi_2_3906250] = { + [pbn_oxsemi_2_15625000] = { .flags = FL_BASE0, .num_ports = 2, - .base_baud = 3906250, + .base_baud = 15625000, .uart_offset = 0x200, .first_offset = 0x1000, }, - [pbn_oxsemi_4_3906250] = { + [pbn_oxsemi_4_15625000] = { .flags = FL_BASE0, .num_ports = 4, - .base_baud = 3906250, + .base_baud = 15625000, .uart_offset = 0x200, .first_offset = 0x1000, }, - [pbn_oxsemi_8_3906250] = { + [pbn_oxsemi_8_15625000] = { .flags = FL_BASE0, .num_ports = 8, - .base_baud = 3906250, + .base_baud = 15625000, .uart_offset = 0x200, .first_offset = 0x1000, }, @@ -3518,6 +3695,12 @@ static struct pciserial_board pci_boards[] = { }, }; +#define REPORT_CONFIG(option) \ + (IS_ENABLED(CONFIG_##option) ? 0 : (kernel_ulong_t)&#option) +#define REPORT_8250_CONFIG(option) \ + (IS_ENABLED(CONFIG_SERIAL_8250_##option) ? \ + 0 : (kernel_ulong_t)&"SERIAL_8250_"#option) + static const struct pci_device_id blacklist[] = { /* softmodems */ { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ @@ -3525,40 +3708,43 @@ static const struct pci_device_id blacklist[] = { { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ /* multi-io cards handled by parport_serial */ - { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ - { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ - { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ + /* WCH CH353 2S1P */ + { PCI_DEVICE(0x4348, 0x7053), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, + /* WCH CH353 1S1P */ + { PCI_DEVICE(0x4348, 0x5053), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, + /* WCH CH382 2S1P */ + { PCI_DEVICE(0x1c00, 0x3250), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, /* Intel platforms with MID UART */ - { PCI_VDEVICE(INTEL, 0x081b), }, - { PCI_VDEVICE(INTEL, 0x081c), }, - { PCI_VDEVICE(INTEL, 0x081d), }, - { PCI_VDEVICE(INTEL, 0x1191), }, - { PCI_VDEVICE(INTEL, 0x18d8), }, - { PCI_VDEVICE(INTEL, 0x19d8), }, + { PCI_VDEVICE(INTEL, 0x081b), REPORT_8250_CONFIG(MID), }, + { PCI_VDEVICE(INTEL, 0x081c), REPORT_8250_CONFIG(MID), }, + { PCI_VDEVICE(INTEL, 0x081d), REPORT_8250_CONFIG(MID), }, + { PCI_VDEVICE(INTEL, 0x1191), REPORT_8250_CONFIG(MID), }, + { PCI_VDEVICE(INTEL, 0x18d8), REPORT_8250_CONFIG(MID), }, + { PCI_VDEVICE(INTEL, 0x19d8), REPORT_8250_CONFIG(MID), }, /* Intel platforms with DesignWare UART */ - { PCI_VDEVICE(INTEL, 0x0936), }, - { PCI_VDEVICE(INTEL, 0x0f0a), }, - { PCI_VDEVICE(INTEL, 0x0f0c), }, - { PCI_VDEVICE(INTEL, 0x228a), }, - { PCI_VDEVICE(INTEL, 0x228c), }, - { PCI_VDEVICE(INTEL, 0x4b96), }, - { PCI_VDEVICE(INTEL, 0x4b97), }, - { PCI_VDEVICE(INTEL, 0x4b98), }, - { PCI_VDEVICE(INTEL, 0x4b99), }, - { PCI_VDEVICE(INTEL, 0x4b9a), }, - { PCI_VDEVICE(INTEL, 0x4b9b), }, - { PCI_VDEVICE(INTEL, 0x9ce3), }, - { PCI_VDEVICE(INTEL, 0x9ce4), }, + { PCI_VDEVICE(INTEL, 0x0936), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x0f0a), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x0f0c), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x228a), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x228c), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x4b96), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x4b97), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x4b98), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x4b99), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x4b9a), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x4b9b), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x9ce3), REPORT_8250_CONFIG(LPSS), }, + { PCI_VDEVICE(INTEL, 0x9ce4), REPORT_8250_CONFIG(LPSS), }, /* Exar devices */ - { PCI_VDEVICE(EXAR, PCI_ANY_ID), }, - { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), }, + { PCI_VDEVICE(EXAR, PCI_ANY_ID), REPORT_8250_CONFIG(EXAR), }, + { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), REPORT_8250_CONFIG(EXAR), }, /* Pericom devices */ - { PCI_VDEVICE(PERICOM, PCI_ANY_ID), }, - { PCI_VDEVICE(ACCESSIO, PCI_ANY_ID), }, + { PCI_VDEVICE(PERICOM, PCI_ANY_ID), REPORT_8250_CONFIG(PERICOM), }, + { PCI_VDEVICE(ACCESSIO, PCI_ANY_ID), REPORT_8250_CONFIG(PERICOM), }, /* End of the black list */ { } @@ -3840,8 +4026,12 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) board = &pci_boards[ent->driver_data]; exclude = pci_match_id(blacklist, dev); - if (exclude) + if (exclude) { + if (exclude->driver_data) + pci_warn(dev, "ignoring port, enable %s to handle\n", + (const char *)exclude->driver_data); return -ENODEV; + } rc = pcim_enable_device(dev); pci_save_state(dev); @@ -4110,13 +4300,6 @@ static const struct pci_device_id serial_pci_tbl[] = { 0x10b5, 0x106a, 0, 0, pbn_plx_romulus }, /* - * EndRun Technologies. PCI express device range. - * EndRun PTP/1588 has 2 Native UARTs. - */ - { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_endrun_2_3906250 }, - /* * Quatech cards. These actually have configurable clocks but for * now we just use the default. * @@ -4225,158 +4408,165 @@ static const struct pci_device_id serial_pci_tbl[] = { */ { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_3906250 }, + pbn_b0_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_3906250 }, + pbn_b0_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_3906250 }, + pbn_b0_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_3906250 }, + pbn_b0_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_3906250 }, + pbn_b0_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_3906250 }, + pbn_b0_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_3906250 }, + pbn_b0_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_3906250 }, + pbn_b0_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_3906250 }, + pbn_oxsemi_2_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_3906250 }, + pbn_oxsemi_2_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_3906250 }, + pbn_oxsemi_4_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_3906250 }, + pbn_oxsemi_4_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_3906250 }, + pbn_oxsemi_8_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_3906250 }, + pbn_oxsemi_8_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, /* * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado */ { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, - pbn_oxsemi_1_3906250 }, + pbn_oxsemi_1_15625000 }, { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, - pbn_oxsemi_2_3906250 }, + pbn_oxsemi_2_15625000 }, { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, - pbn_oxsemi_4_3906250 }, + pbn_oxsemi_4_15625000 }, { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, - pbn_oxsemi_8_3906250 }, + pbn_oxsemi_8_15625000 }, /* * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado */ { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_3906250 }, + pbn_oxsemi_2_15625000 }, + /* + * EndRun Technologies. PCI express device range. + * EndRun PTP/1588 has 2 Native UARTs utilizing OxSemi 952. + */ + { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_15625000 }, /* * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1fbd5bf264be..78b6dedc43e6 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -263,7 +263,7 @@ static const struct serial8250_config uart_config[] = { .tx_loadsz = 63, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | UART_FCR7_64BYTE, - .flags = UART_CAP_FIFO, + .flags = UART_CAP_FIFO | UART_CAP_NOTEMT, }, [PORT_RT2880] = { .name = "Palmchip BK-3103", @@ -538,27 +538,6 @@ serial_port_out_sync(struct uart_port *p, int offset, int value) } /* - * For the 16C950 - */ -static void serial_icr_write(struct uart_8250_port *up, int offset, int value) -{ - serial_out(up, UART_SCR, offset); - serial_out(up, UART_ICR, value); -} - -static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) -{ - unsigned int value; - - serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); - serial_out(up, UART_SCR, offset); - value = serial_in(up, UART_ICR); - serial_icr_write(up, UART_ACR, up->acr); - - return value; -} - -/* * FIFO support. */ static void serial8250_clear_fifos(struct uart_8250_port *p) @@ -1504,18 +1483,19 @@ static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec) hrtimer_start(hrt, ms_to_ktime(msec), HRTIMER_MODE_REL); } -static void __stop_tx_rs485(struct uart_8250_port *p) +static void __stop_tx_rs485(struct uart_8250_port *p, u64 stop_delay) { struct uart_8250_em485 *em485 = p->em485; + stop_delay += (u64)p->port.rs485.delay_rts_after_send * NSEC_PER_MSEC; + /* * rs485_stop_tx() is going to set RTS according to config * AND flush RX FIFO if required. */ - if (p->port.rs485.delay_rts_after_send > 0) { + if (stop_delay > 0) { em485->active_timer = &em485->stop_tx_timer; - start_hrtimer_ms(&em485->stop_tx_timer, - p->port.rs485.delay_rts_after_send); + hrtimer_start(&em485->stop_tx_timer, ns_to_ktime(stop_delay), HRTIMER_MODE_REL); } else { p->rs485_stop_tx(p); em485->active_timer = NULL; @@ -1535,16 +1515,32 @@ static inline void __stop_tx(struct uart_8250_port *p) if (em485) { unsigned char lsr = serial_in(p, UART_LSR); + u64 stop_delay = 0; + + if (!(lsr & UART_LSR_THRE)) + return; /* * To provide required timeing and allow FIFO transfer, * __stop_tx_rs485() must be called only when both FIFO and - * shift register are empty. It is for device driver to enable - * interrupt on TEMT. + * shift register are empty. The device driver should either + * enable interrupt on TEMT or set UART_CAP_NOTEMT that will + * enlarge stop_tx_timer by the tx time of one frame to cover + * for emptying of the shift register. */ - if ((lsr & BOTH_EMPTY) != BOTH_EMPTY) - return; + if (!(lsr & UART_LSR_TEMT)) { + if (!(p->capabilities & UART_CAP_NOTEMT)) + return; + /* + * RTS might get deasserted too early with the normal + * frame timing formula. It seems to suggest THRE might + * get asserted already during tx of the stop bit + * rather than after it is fully sent. + * Roughly estimate 1 extra bit here with / 7. + */ + stop_delay = p->port.frame_time + DIV_ROUND_UP(p->port.frame_time, 7); + } - __stop_tx_rs485(p); + __stop_tx_rs485(p, stop_delay); } __do_stop_tx(p); } @@ -1948,9 +1944,12 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial8250_rx_chars(up, status); } serial8250_modem_status(up); - if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE) && - (up->ier & UART_IER_THRI)) - serial8250_tx_chars(up); + if ((status & UART_LSR_THRE) && (up->ier & UART_IER_THRI)) { + if (!up->dma || up->dma->tx_err) + serial8250_tx_chars(up); + else + __stop_tx(up); + } uart_unlock_and_check_sysrq_irqrestore(port, flags); @@ -2077,10 +2076,7 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) serial8250_rpm_put(up); } -/* - * Wait for transmitter & holding register to empty - */ -static void wait_for_xmitr(struct uart_8250_port *up, int bits) +static void wait_for_lsr(struct uart_8250_port *up, int bits) { unsigned int status, tmout = 10000; @@ -2097,6 +2093,16 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits) udelay(1); touch_nmi_watchdog(); } +} + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_8250_port *up, int bits) +{ + unsigned int tmout; + + wait_for_lsr(up, bits); /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { @@ -2614,10 +2620,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, } if (!(c_cflag & PARODD)) cval |= UART_LCR_EPAR; -#ifdef CMSPAR if (c_cflag & CMSPAR) cval |= UART_LCR_SPAR; -#endif return cval; } @@ -3333,6 +3337,35 @@ static void serial8250_console_restore(struct uart_8250_port *up) } /* + * Print a string to the serial port using the device FIFO + * + * It sends fifosize bytes and then waits for the fifo + * to get empty. + */ +static void serial8250_console_fifo_write(struct uart_8250_port *up, + const char *s, unsigned int count) +{ + int i; + const char *end = s + count; + unsigned int fifosize = up->tx_loadsz; + bool cr_sent = false; + + while (s != end) { + wait_for_lsr(up, UART_LSR_THRE); + + for (i = 0; i < fifosize && s != end; ++i) { + if (*s == '\n' && !cr_sent) { + serial_out(up, UART_TX, '\r'); + cr_sent = true; + } else { + serial_out(up, UART_TX, *s++); + cr_sent = false; + } + } + } +} + +/* * Print a string to the serial port trying not to disturb * any possible real use of the port... * @@ -3347,7 +3380,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, struct uart_8250_em485 *em485 = up->em485; struct uart_port *port = &up->port; unsigned long flags; - unsigned int ier; + unsigned int ier, use_fifo; int locked = 1; touch_nmi_watchdog(); @@ -3379,7 +3412,30 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, mdelay(port->rs485.delay_rts_before_send); } - uart_console_write(port, s, count, serial8250_console_putchar); + use_fifo = (up->capabilities & UART_CAP_FIFO) && + /* + * BCM283x requires to check the fifo + * after each byte. + */ + !(up->capabilities & UART_CAP_MINI) && + /* + * tx_loadsz contains the transmit fifo size + */ + up->tx_loadsz > 1 && + (up->fcr & UART_FCR_ENABLE_FIFO) && + port->state && + test_bit(TTY_PORT_INITIALIZED, &port->state->port.iflags) && + /* + * After we put a data in the fifo, the controller will send + * it regardless of the CTS state. Therefore, only use fifo + * if we don't use control flow. + */ + !(up->port.flags & UPF_CONS_FLOW); + + if (likely(use_fifo)) + serial8250_console_fifo_write(up, s, count); + else + uart_console_write(port, s, count, serial8250_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c index 33ca98bfa5b3..795e55142d4c 100644 --- a/drivers/tty/serial/8250/8250_pxa.c +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/clk.h> -#include <linux/pm_runtime.h> #include "8250.h" diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index cd93ea6eed65..fdb6c4188695 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -380,7 +380,7 @@ config SERIAL_8250_DW config SERIAL_8250_EM tristate "Support for Emma Mobile integrated serial port" depends on SERIAL_8250 && HAVE_CLK - depends on (ARM && ARCH_RENESAS) || COMPILE_TEST + depends on ARCH_RENESAS || COMPILE_TEST help Selecting this option will add support for the integrated serial port hardware found on the Emma Mobile line of processors. diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index dbac90e2e209..a452748c69b2 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -782,7 +782,7 @@ config SERIAL_PMACZILOG_CONSOLE config SERIAL_CPM tristate "CPM SCC/SMC serial port support" - depends on CPM2 || CPM1 + depends on CPM2 || CPM1 || (PPC32 && COMPILE_TEST) select SERIAL_CORE help This driver supports the SCC and SMC serial ports on Motorola @@ -806,7 +806,7 @@ config SERIAL_CPM_CONSOLE config SERIAL_PIC32 tristate "Microchip PIC32 serial support" - depends on MACH_PIC32 + depends on MACH_PIC32 || (MIPS && COMPILE_TEST) select SERIAL_CORE help If you have a PIC32, this driver supports the serial ports. @@ -817,7 +817,7 @@ config SERIAL_PIC32 config SERIAL_PIC32_CONSOLE bool "PIC32 serial console support" - depends on SERIAL_PIC32 + depends on SERIAL_PIC32=y select SERIAL_CORE_CONSOLE help If you have a PIC32, this driver supports the putting a console on one @@ -1246,7 +1246,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE config SERIAL_AR933X tristate "AR933X serial port support" - depends on HAVE_CLK && ATH79 + depends on (HAVE_CLK && ATH79) || (MIPS && COMPILE_TEST) select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB help @@ -1442,6 +1442,7 @@ config SERIAL_STM32_CONSOLE bool "Support for console on STM32" depends on SERIAL_STM32=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON config SERIAL_MVEBU_UART bool "Marvell EBU serial port support" diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 1c16345d0a1f..cb791c5149a3 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -168,10 +168,8 @@ static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) } } - if (pending == 0) { - pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); - } + if (pending == 0) + altera_jtaguart_stop_tx(port); } static irqreturn_t altera_jtaguart_interrupt(int irq, void *data) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 4d11a3e547f9..97ef41cb2721 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -42,8 +42,6 @@ #include <linux/io.h> #include <linux/acpi.h> -#include "amba-pl011.h" - #define UART_NR 14 #define SERIAL_AMBA_MAJOR 204 @@ -55,6 +53,36 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) +enum { + REG_DR, + REG_ST_DMAWM, + REG_ST_TIMEOUT, + REG_FR, + REG_LCRH_RX, + REG_LCRH_TX, + REG_IBRD, + REG_FBRD, + REG_CR, + REG_IFLS, + REG_IMSC, + REG_RIS, + REG_MIS, + REG_ICR, + REG_DMACR, + REG_ST_XFCR, + REG_ST_XON1, + REG_ST_XON2, + REG_ST_XOFF1, + REG_ST_XOFF2, + REG_ST_ITCR, + REG_ST_ITIP, + REG_ST_ABCR, + REG_ST_ABIMSC, + + /* The size of the array - must be last */ + REG_ARRAY_SIZE, +}; + static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { [REG_DR] = UART01x_DR, [REG_FR] = UART01x_FR, @@ -2175,25 +2203,11 @@ static int pl011_rs485_config(struct uart_port *port, struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - /* pick sane settings if the user hasn't */ - if (!(rs485->flags & SER_RS485_RTS_ON_SEND) == - !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) { - rs485->flags |= SER_RS485_RTS_ON_SEND; - rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; - } - /* clamp the delays to [0, 100ms] */ - rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U); - rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U); - memset(rs485->padding, 0, sizeof(rs485->padding)); - if (port->rs485.flags & SER_RS485_ENABLED) pl011_rs485_tx_stop(uap); - /* Set new configuration */ - port->rs485 = *rs485; - /* Make sure auto RTS is disabled */ - if (port->rs485.flags & SER_RS485_ENABLED) { + if (rs485->flags & SER_RS485_ENABLED) { u32 cr = pl011_read(uap, REG_CR); cr &= ~UART011_CR_RTSEN; diff --git a/drivers/tty/serial/amba-pl011.h b/drivers/tty/serial/amba-pl011.h deleted file mode 100644 index 077eb12a3472..000000000000 --- a/drivers/tty/serial/amba-pl011.h +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef AMBA_PL011_H -#define AMBA_PL011_H - -enum { - REG_DR, - REG_ST_DMAWM, - REG_ST_TIMEOUT, - REG_FR, - REG_LCRH_RX, - REG_LCRH_TX, - REG_IBRD, - REG_FBRD, - REG_CR, - REG_IFLS, - REG_IMSC, - REG_RIS, - REG_MIS, - REG_ICR, - REG_DMACR, - REG_ST_XFCR, - REG_ST_XON1, - REG_ST_XON2, - REG_ST_XOFF1, - REG_ST_XOFF2, - REG_ST_ITCR, - REG_ST_ITIP, - REG_ST_ABCR, - REG_ST_ABIMSC, - - /* The size of the array - must be last */ - REG_ARRAY_SIZE, -}; - -#endif diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 3a45e4fc7993..dd1c7e4bd1c9 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -299,11 +299,9 @@ static int atmel_config_rs485(struct uart_port *port, /* Resetting serial mode to RS232 (0x0) */ mode &= ~ATMEL_US_USMODE; - port->rs485 = *rs485conf; - if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (port->rs485.flags & SER_RS485_RX_DURING_TX) + if (rs485conf->flags & SER_RS485_RX_DURING_TX) atmel_port->tx_done_mask = ATMEL_US_TXRDY; else atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h index 6113b953ce25..8c582779cf22 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart.h +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -19,6 +19,8 @@ struct gpio_desc; #include "cpm_uart_cpm2.h" #elif defined(CONFIG_CPM1) #include "cpm_uart_cpm1.h" +#elif defined(CONFIG_COMPILE_TEST) +#include "cpm_uart_cpm2.h" #endif #define SERIAL_CPM_MAJOR 204 diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index d6d3db9c3b1f..db07d6a5d764 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1247,7 +1247,7 @@ static int cpm_uart_init_port(struct device_node *np, } #ifdef CONFIG_PPC_EARLY_DEBUG_CPM -#ifdef CONFIG_CONSOLE_POLL +#if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_CPM_CONSOLE) if (!udbg_port) #endif udbg_putc = NULL; diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c index 6a1cd03bfe39..108af254e8f3 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c @@ -25,7 +25,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/fs_pd.h> -#include <asm/prom.h> #include <linux/serial_core.h> #include <linux/kernel.h> diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index e37a917b9dbb..af951e6a2ef4 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -309,6 +309,8 @@ static void digicolor_uart_set_termios(struct uart_port *port, case CS8: default: config |= UA_CONFIG_CHAR_LEN; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; break; } diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index be12fee94db5..0d6e62f6bb07 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -239,8 +239,6 @@ /* IMX lpuart has four extra unused regs located at the beginning */ #define IMX_REG_OFF 0x10 -static DEFINE_IDA(fsl_lpuart_ida); - enum lpuart_type { VF610_LPUART, LS1021A_LPUART, @@ -276,7 +274,6 @@ struct lpuart_port { int rx_dma_rng_buf_len; unsigned int dma_tx_nents; wait_queue_head_t dma_wait; - bool id_allocated; }; struct lpuart_soc_data { @@ -1118,7 +1115,7 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport) struct dma_chan *chan = sport->dma_rx_chan; struct circ_buf *ring = &sport->rx_ring; unsigned long flags; - int count = 0, copied; + int count, copied; if (lpuart_is_32(sport)) { unsigned long sr = lpuart32_read(&sport->port, UARTSTAT); @@ -1378,19 +1375,6 @@ static int lpuart_config_rs485(struct uart_port *port, modem |= UARTMODEM_TXRTSE; /* - * RTS needs to be logic HIGH either during transfer _or_ after - * transfer, other variants are not supported by the hardware. - */ - - if (!(rs485->flags & (SER_RS485_RTS_ON_SEND | - SER_RS485_RTS_AFTER_SEND))) - rs485->flags |= SER_RS485_RTS_ON_SEND; - - if (rs485->flags & SER_RS485_RTS_ON_SEND && - rs485->flags & SER_RS485_RTS_AFTER_SEND) - rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; - - /* * The hardware defaults to RTS logic HIGH while transfer. * Switch polarity in case RTS shall be logic HIGH * after transfer. @@ -1402,9 +1386,6 @@ static int lpuart_config_rs485(struct uart_port *port, modem |= UARTMODEM_TXRTSPOL; } - /* Store the new configuration */ - sport->port.rs485 = *rs485; - writeb(modem, sport->port.membase + UARTMODEM); return 0; } @@ -1429,19 +1410,6 @@ static int lpuart32_config_rs485(struct uart_port *port, modem |= UARTMODEM_TXRTSE; /* - * RTS needs to be logic HIGH either during transfer _or_ after - * transfer, other variants are not supported by the hardware. - */ - - if (!(rs485->flags & (SER_RS485_RTS_ON_SEND | - SER_RS485_RTS_AFTER_SEND))) - rs485->flags |= SER_RS485_RTS_ON_SEND; - - if (rs485->flags & SER_RS485_RTS_ON_SEND && - rs485->flags & SER_RS485_RTS_AFTER_SEND) - rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; - - /* * The hardware defaults to RTS logic HIGH while transfer. * Switch polarity in case RTS shall be logic HIGH * after transfer. @@ -1453,9 +1421,6 @@ static int lpuart32_config_rs485(struct uart_port *port, modem |= UARTMODEM_TXRTSPOL; } - /* Store the new configuration */ - sport->port.rs485 = *rs485; - lpuart32_write(&sport->port, modem, UARTMODIR); return 0; } @@ -2145,12 +2110,10 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, if (sport->port.rs485.flags & SER_RS485_ENABLED) termios->c_cflag &= ~CRTSCTS; - if (termios->c_cflag & CRTSCTS) { - modem |= (UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); - } else { - termios->c_cflag &= ~CRTSCTS; + if (termios->c_cflag & CRTSCTS) + modem |= UARTMODIR_RXRTSE | UARTMODIR_TXCTSE; + else modem &= ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); - } if (termios->c_cflag & CSTOPB) bd |= UARTBAUD_SBNS; @@ -2717,23 +2680,18 @@ static int lpuart_probe(struct platform_device *pdev) ret = of_alias_get_id(np, "serial"); if (ret < 0) { - ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL); - if (ret < 0) { - dev_err(&pdev->dev, "port line is full, add device failed\n"); - return ret; - } - sport->id_allocated = true; + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; } if (ret >= ARRAY_SIZE(lpuart_ports)) { dev_err(&pdev->dev, "serial%d out of range\n", ret); - ret = -EINVAL; - goto failed_out_of_range; + return -EINVAL; } sport->port.line = ret; ret = lpuart_enable_clks(sport); if (ret) - goto failed_clock_enable; + return ret; sport->port.uartclk = lpuart_get_baud_clk_rate(sport); lpuart_ports[sport->port.line] = sport; @@ -2781,10 +2739,6 @@ failed_reset: uart_remove_one_port(&lpuart_reg, &sport->port); failed_attach_port: lpuart_disable_clks(sport); -failed_clock_enable: -failed_out_of_range: - if (sport->id_allocated) - ida_simple_remove(&fsl_lpuart_ida, sport->port.line); return ret; } @@ -2794,9 +2748,6 @@ static int lpuart_remove(struct platform_device *pdev) uart_remove_one_port(&lpuart_reg, &sport->port); - if (sport->id_allocated) - ida_simple_remove(&fsl_lpuart_ida, sport->port.line); - lpuart_disable_clks(sport); if (sport->dma_tx_chan) @@ -2926,7 +2877,6 @@ static int __init lpuart_serial_init(void) static void __exit lpuart_serial_exit(void) { - ida_destroy(&fsl_lpuart_ida); platform_driver_unregister(&lpuart_driver); uart_unregister_driver(&lpuart_reg); } diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 03a2fe9f4c9a..45df29947fe8 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -19,6 +19,7 @@ #include <linux/fs.h> #include <linux/tty_flip.h> #include <linux/serial.h> +#include <linux/serial_core.h> #include <linux/serial_reg.h> #include <linux/major.h> #include <linux/string.h> @@ -41,15 +42,273 @@ #include <asm/irq.h> #include <linux/uaccess.h> -#include "icom.h" - /*#define ICOM_TRACE enable port trace capabilities */ #define ICOM_DRIVER_NAME "icom" -#define ICOM_VERSION_STR "1.3.1" #define NR_PORTS 128 -#define ICOM_PORT ((struct icom_port *)port) -#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) + +static const unsigned int icom_acfg_baud[] = { + 300, + 600, + 900, + 1200, + 1800, + 2400, + 3600, + 4800, + 7200, + 9600, + 14400, + 19200, + 28800, + 38400, + 57600, + 76800, + 115200, + 153600, + 230400, + 307200, + 460800, +}; +#define BAUD_TABLE_LIMIT (ARRAY_SIZE(icom_acfg_baud) - 1) + +struct icom_regs { + u32 control; /* Adapter Control Register */ + u32 interrupt; /* Adapter Interrupt Register */ + u32 int_mask; /* Adapter Interrupt Mask Reg */ + u32 int_pri; /* Adapter Interrupt Priority r */ + u32 int_reg_b; /* Adapter non-masked Interrupt */ + u32 resvd01; + u32 resvd02; + u32 resvd03; + u32 control_2; /* Adapter Control Register 2 */ + u32 interrupt_2; /* Adapter Interrupt Register 2 */ + u32 int_mask_2; /* Adapter Interrupt Mask 2 */ + u32 int_pri_2; /* Adapter Interrupt Prior 2 */ + u32 int_reg_2b; /* Adapter non-masked 2 */ +}; + +struct func_dram { + u32 reserved[108]; /* 0-1B0 reserved by personality code */ + u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ + u8 RcvStnAddr; /* 1B4 Receive Station Addr */ + u8 IdleState; /* 1B5 Idle State */ + u8 IdleMonitor; /* 1B6 Idle Monitor */ + u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ + u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ + u8 StartXmitCmd; /* 1BC Start Xmit Command */ + u8 HDLCConfigReg; /* 1BD Reserved */ + u8 CauseCode; /* 1BE Cause code for fatal error */ + u8 xchar; /* 1BF High priority send */ + u32 reserved3; /* 1C0-1C3 Reserved */ + u8 PrevCmdReg; /* 1C4 Reserved */ + u8 CmdReg; /* 1C5 Command Register */ + u8 async_config2; /* 1C6 Async Config Byte 2 */ + u8 async_config3; /* 1C7 Async Config Byte 3 */ + u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ + u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ + u8 misc_flags; /* 1DD misc flags */ +#define V2_HARDWARE 0x40 +#define ICOM_HDW_ACTIVE 0x01 + u8 call_length; /* 1DE Phone #/CFI buff ln */ + u8 call_length2; /* 1DF Upper byte (unused) */ + u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ + u16 timer_value; /* 1E4-1E5 general timer value */ + u8 timer_command; /* 1E6 general timer cmd */ + u8 dce_command; /* 1E7 dce command reg */ + u8 dce_cmd_status; /* 1E8 dce command stat */ + u8 x21_r1_ioff; /* 1E9 dce ready counter */ + u8 x21_r0_ioff; /* 1EA dce not ready ctr */ + u8 x21_ralt_ioff; /* 1EB dce CNR counter */ + u8 x21_r1_ion; /* 1EC dce ready I on ctr */ + u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ + u8 ier; /* 1EE Interrupt Enable */ + u8 isr; /* 1EF Input Signal Reg */ + u8 osr; /* 1F0 Output Signal Reg */ + u8 reset; /* 1F1 Reset/Reload Reg */ + u8 disable; /* 1F2 Disable Reg */ + u8 sync; /* 1F3 Sync Reg */ + u8 error_stat; /* 1F4 Error Status */ + u8 cable_id; /* 1F5 Cable ID */ + u8 cs_length; /* 1F6 CS Load Length */ + u8 mac_length; /* 1F7 Mac Load Length */ + u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ + u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ +}; + +/* + * adapter defines and structures + */ +#define ICOM_CONTROL_START_A 0x00000008 +#define ICOM_CONTROL_STOP_A 0x00000004 +#define ICOM_CONTROL_START_B 0x00000002 +#define ICOM_CONTROL_STOP_B 0x00000001 +#define ICOM_CONTROL_START_C 0x00000008 +#define ICOM_CONTROL_STOP_C 0x00000004 +#define ICOM_CONTROL_START_D 0x00000002 +#define ICOM_CONTROL_STOP_D 0x00000001 +#define ICOM_IRAM_OFFSET 0x1000 +#define ICOM_IRAM_SIZE 0x0C00 +#define ICOM_DCE_IRAM_OFFSET 0x0A00 +#define ICOM_CABLE_ID_VALID 0x01 +#define ICOM_CABLE_ID_MASK 0xF0 +#define ICOM_DISABLE 0x80 +#define CMD_XMIT_RCV_ENABLE 0xC0 +#define CMD_XMIT_ENABLE 0x40 +#define CMD_RCV_DISABLE 0x00 +#define CMD_RCV_ENABLE 0x80 +#define CMD_RESTART 0x01 +#define CMD_HOLD_XMIT 0x02 +#define CMD_SND_BREAK 0x04 +#define RS232_CABLE 0x06 +#define V24_CABLE 0x0E +#define V35_CABLE 0x0C +#define V36_CABLE 0x02 +#define NO_CABLE 0x00 +#define START_DOWNLOAD 0x80 +#define ICOM_INT_MASK_PRC_A 0x00003FFF +#define ICOM_INT_MASK_PRC_B 0x3FFF0000 +#define ICOM_INT_MASK_PRC_C 0x00003FFF +#define ICOM_INT_MASK_PRC_D 0x3FFF0000 +#define INT_RCV_COMPLETED 0x1000 +#define INT_XMIT_COMPLETED 0x2000 +#define INT_IDLE_DETECT 0x0800 +#define INT_RCV_DISABLED 0x0400 +#define INT_XMIT_DISABLED 0x0200 +#define INT_RCV_XMIT_SHUTDOWN 0x0100 +#define INT_FATAL_ERROR 0x0080 +#define INT_CABLE_PULL 0x0020 +#define INT_SIGNAL_CHANGE 0x0010 +#define HDLC_PPP_PURE_ASYNC 0x02 +#define HDLC_FF_FILL 0x00 +#define HDLC_HDW_FLOW 0x01 +#define START_XMIT 0x80 +#define ICOM_ACFG_DRIVE1 0x20 +#define ICOM_ACFG_NO_PARITY 0x00 +#define ICOM_ACFG_PARITY_ENAB 0x02 +#define ICOM_ACFG_PARITY_ODD 0x01 +#define ICOM_ACFG_8BPC 0x00 +#define ICOM_ACFG_7BPC 0x04 +#define ICOM_ACFG_6BPC 0x08 +#define ICOM_ACFG_5BPC 0x0C +#define ICOM_ACFG_1STOP_BIT 0x00 +#define ICOM_ACFG_2STOP_BIT 0x10 +#define ICOM_DTR 0x80 +#define ICOM_RTS 0x40 +#define ICOM_RI 0x08 +#define ICOM_DSR 0x80 +#define ICOM_DCD 0x20 +#define ICOM_CTS 0x40 + +#define NUM_XBUFFS 1 +#define NUM_RBUFFS 2 +#define RCV_BUFF_SZ 0x0200 +#define XMIT_BUFF_SZ 0x1000 +struct statusArea { + /**********************************************/ + /* Transmit Status Area */ + /**********************************************/ + struct xmit_status_area{ + __le32 leNext; /* Next entry in Little Endian on Adapter */ + __le32 leNextASD; + __le32 leBuffer; /* Buffer for entry in LE for Adapter */ + __le16 leLengthASD; + __le16 leOffsetASD; + __le16 leLength; /* Length of data in segment */ + __le16 flags; +#define SA_FLAGS_DONE 0x0080 /* Done with Segment */ +#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ +#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ +#define SA_FLAGS_READY_TO_XMIT 0x0800 +#define SA_FLAGS_STAT_MASK 0x007F + } xmit[NUM_XBUFFS]; + + /**********************************************/ + /* Receive Status Area */ + /**********************************************/ + struct { + __le32 leNext; /* Next entry in Little Endian on Adapter */ + __le32 leNextASD; + __le32 leBuffer; /* Buffer for entry in LE for Adapter */ + __le16 WorkingLength; /* size of segment */ + __le16 reserv01; + __le16 leLength; /* Length of data in segment */ + __le16 flags; +#define SA_FL_RCV_DONE 0x0010 /* Data ready */ +#define SA_FLAGS_OVERRUN 0x0040 +#define SA_FLAGS_PARITY_ERROR 0x0080 +#define SA_FLAGS_FRAME_ERROR 0x0001 +#define SA_FLAGS_FRAME_TRUNC 0x0002 +#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ +#define SA_FLAGS_RCV_MASK 0xFFE6 + } rcv[NUM_RBUFFS]; +}; + +struct icom_adapter; + + +#define ICOM_MAJOR 243 +#define ICOM_MINOR_START 0 + +struct icom_port { + struct uart_port uart_port; + unsigned char cable_id; + unsigned char read_status_mask; + unsigned char ignore_status_mask; + void __iomem * int_reg; + struct icom_regs __iomem *global_reg; + struct func_dram __iomem *dram; + int port; + struct statusArea *statStg; + dma_addr_t statStg_pci; + __le32 *xmitRestart; + dma_addr_t xmitRestart_pci; + unsigned char *xmit_buf; + dma_addr_t xmit_buf_pci; + unsigned char *recv_buf; + dma_addr_t recv_buf_pci; + int next_rcv; + int status; +#define ICOM_PORT_ACTIVE 1 /* Port exists. */ +#define ICOM_PORT_OFF 0 /* Port does not exist. */ + struct icom_adapter *adapter; +}; + +struct icom_adapter { + void __iomem * base_addr; + unsigned long base_addr_pci; + struct pci_dev *pci_dev; + struct icom_port port_info[4]; + int index; + int version; +#define ADAPTER_V1 0x0001 +#define ADAPTER_V2 0x0002 + u32 subsystem_id; +#define FOUR_PORT_MODEL 0x0252 +#define V2_TWO_PORTS_RVX 0x021A +#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 + int numb_ports; + struct list_head icom_adapter_entry; + struct kref kref; +}; + +/* prototype */ +extern void iCom_sercons_init(void); + +struct lookup_proc_table { + u32 __iomem *global_control_reg; + unsigned long processor_id; +}; + +struct lookup_int_table { + u32 __iomem *global_int_mask; + unsigned long processor_id; +}; + +static inline struct icom_port *to_icom_port(struct uart_port *port) +{ + return container_of(port, struct icom_port, uart_port); +} static const struct pci_device_id icom_pci_table[] = { { @@ -222,7 +481,7 @@ static int get_port_memory(struct icom_port *icom_port) if (index < (NUM_XBUFFS - 1)) { memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); icom_port->statStg->xmit[index].leLengthASD = - (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + cpu_to_le16(XMIT_BUFF_SZ); trace(icom_port, "FOD_ADDR", stgAddr); trace(icom_port, "FOD_XBUFF", (unsigned long) icom_port->xmit_buf); @@ -231,7 +490,7 @@ static int get_port_memory(struct icom_port *icom_port) } else if (index == (NUM_XBUFFS - 1)) { memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); icom_port->statStg->xmit[index].leLengthASD = - (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + cpu_to_le16(XMIT_BUFF_SZ); trace(icom_port, "FOD_XBUFF", (unsigned long) icom_port->xmit_buf); icom_port->statStg->xmit[index].leBuffer = @@ -249,7 +508,7 @@ static int get_port_memory(struct icom_port *icom_port) stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); icom_port->statStg->rcv[index].leLength = 0; icom_port->statStg->rcv[index].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + cpu_to_le16(RCV_BUFF_SZ); if (index < (NUM_RBUFFS - 1) ) { offset = stgAddr - (unsigned long) icom_port->statStg; icom_port->statStg->rcv[index].leNext = @@ -617,16 +876,17 @@ unlock: static int icom_write(struct uart_port *port) { + struct icom_port *icom_port = to_icom_port(port); unsigned long data_count; unsigned char cmdReg; unsigned long offset; int temp_tail = port->state->xmit.tail; - trace(ICOM_PORT, "WRITE", 0); + trace(icom_port, "WRITE", 0); - if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + if (le16_to_cpu(icom_port->statStg->xmit[0].flags) & SA_FLAGS_READY_TO_XMIT) { - trace(ICOM_PORT, "WRITE_FULL", 0); + trace(icom_port, "WRITE_FULL", 0); return 0; } @@ -634,7 +894,7 @@ static int icom_write(struct uart_port *port) while ((port->state->xmit.head != temp_tail) && (data_count <= XMIT_BUFF_SZ)) { - ICOM_PORT->xmit_buf[data_count++] = + icom_port->xmit_buf[data_count++] = port->state->xmit.buf[temp_tail]; temp_tail++; @@ -642,22 +902,22 @@ static int icom_write(struct uart_port *port) } if (data_count) { - ICOM_PORT->statStg->xmit[0].flags = + icom_port->statStg->xmit[0].flags = cpu_to_le16(SA_FLAGS_READY_TO_XMIT); - ICOM_PORT->statStg->xmit[0].leLength = + icom_port->statStg->xmit[0].leLength = cpu_to_le16(data_count); offset = - (unsigned long) &ICOM_PORT->statStg->xmit[0] - - (unsigned long) ICOM_PORT->statStg; - *ICOM_PORT->xmitRestart = - cpu_to_le32(ICOM_PORT->statStg_pci + offset); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); + (unsigned long) &icom_port->statStg->xmit[0] - + (unsigned long) icom_port->statStg; + *icom_port->xmitRestart = + cpu_to_le32(icom_port->statStg_pci + offset); + cmdReg = readb(&icom_port->dram->CmdReg); writeb(cmdReg | CMD_XMIT_RCV_ENABLE, - &ICOM_PORT->dram->CmdReg); - writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); - trace(ICOM_PORT, "WRITE_START", data_count); + &icom_port->dram->CmdReg); + writeb(START_XMIT, &icom_port->dram->StartXmitCmd); + trace(icom_port, "WRITE_START", data_count); /* write flush */ - readb(&ICOM_PORT->dram->StartXmitCmd); + readb(&icom_port->dram->StartXmitCmd); } return data_count; @@ -696,8 +956,7 @@ static inline void check_modem_status(struct icom_port *icom_port) static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) { - unsigned short int count; - int i; + u16 count, i; if (port_int_reg & (INT_XMIT_COMPLETED)) { trace(icom_port, "XMIT_COMPLETE", 0); @@ -706,8 +965,7 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) icom_port->statStg->xmit[0].flags &= cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); - count = (unsigned short int) - cpu_to_le16(icom_port->statStg->xmit[0].leLength); + count = le16_to_cpu(icom_port->statStg->xmit[0].leLength); icom_port->uart_port.icount.tx += count; for (i=0; i<count && @@ -729,7 +987,7 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) { short int count, rcv_buff; struct tty_port *port = &icom_port->uart_port.state->port; - unsigned short int status; + u16 status; struct uart_icount *icount; unsigned long offset; unsigned char flag; @@ -737,19 +995,18 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) trace(icom_port, "RCV_COMPLETE", 0); rcv_buff = icom_port->next_rcv; - status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + status = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].flags); while (status & SA_FL_RCV_DONE) { int first = -1; trace(icom_port, "FID_STATUS", status); - count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); + count = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].leLength); trace(icom_port, "RCV_COUNT", count); trace(icom_port, "REAL_COUNT", count); - offset = - cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - + offset = le32_to_cpu(icom_port->statStg->rcv[rcv_buff].leBuffer) - icom_port->recv_buf_pci; /* Block copy all but the last byte as this may have status */ @@ -819,13 +1076,13 @@ ignore_char: icom_port->statStg->rcv[rcv_buff].flags = 0; icom_port->statStg->rcv[rcv_buff].leLength = 0; icom_port->statStg->rcv[rcv_buff].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + cpu_to_le16(RCV_BUFF_SZ); rcv_buff++; if (rcv_buff == NUM_RBUFFS) rcv_buff = 0; - status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + status = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].flags); } icom_port->next_rcv = rcv_buff; @@ -925,11 +1182,12 @@ static irqreturn_t icom_interrupt(int irq, void *dev_id) */ static unsigned int icom_tx_empty(struct uart_port *port) { + struct icom_port *icom_port = to_icom_port(port); int ret; unsigned long flags; spin_lock_irqsave(&port->lock, flags); - if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + if (le16_to_cpu(icom_port->statStg->xmit[0].flags) & SA_FLAGS_READY_TO_XMIT) ret = TIOCSER_TEMT; else @@ -941,38 +1199,40 @@ static unsigned int icom_tx_empty(struct uart_port *port) static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) { + struct icom_port *icom_port = to_icom_port(port); unsigned char local_osr; - trace(ICOM_PORT, "SET_MODEM", 0); - local_osr = readb(&ICOM_PORT->dram->osr); + trace(icom_port, "SET_MODEM", 0); + local_osr = readb(&icom_port->dram->osr); if (mctrl & TIOCM_RTS) { - trace(ICOM_PORT, "RAISE_RTS", 0); + trace(icom_port, "RAISE_RTS", 0); local_osr |= ICOM_RTS; } else { - trace(ICOM_PORT, "LOWER_RTS", 0); + trace(icom_port, "LOWER_RTS", 0); local_osr &= ~ICOM_RTS; } if (mctrl & TIOCM_DTR) { - trace(ICOM_PORT, "RAISE_DTR", 0); + trace(icom_port, "RAISE_DTR", 0); local_osr |= ICOM_DTR; } else { - trace(ICOM_PORT, "LOWER_DTR", 0); + trace(icom_port, "LOWER_DTR", 0); local_osr &= ~ICOM_DTR; } - writeb(local_osr, &ICOM_PORT->dram->osr); + writeb(local_osr, &icom_port->dram->osr); } static unsigned int icom_get_mctrl(struct uart_port *port) { + struct icom_port *icom_port = to_icom_port(port); unsigned char status; unsigned int result; - trace(ICOM_PORT, "GET_MODEM", 0); + trace(icom_port, "GET_MODEM", 0); - status = readb(&ICOM_PORT->dram->isr); + status = readb(&icom_port->dram->isr); result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) | ((status & ICOM_RI) ? TIOCM_RNG : 0) @@ -983,44 +1243,47 @@ static unsigned int icom_get_mctrl(struct uart_port *port) static void icom_stop_tx(struct uart_port *port) { + struct icom_port *icom_port = to_icom_port(port); unsigned char cmdReg; - trace(ICOM_PORT, "STOP", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); + trace(icom_port, "STOP", 0); + cmdReg = readb(&icom_port->dram->CmdReg); + writeb(cmdReg | CMD_HOLD_XMIT, &icom_port->dram->CmdReg); } static void icom_start_tx(struct uart_port *port) { + struct icom_port *icom_port = to_icom_port(port); unsigned char cmdReg; - trace(ICOM_PORT, "START", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); + trace(icom_port, "START", 0); + cmdReg = readb(&icom_port->dram->CmdReg); if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) writeb(cmdReg & ~CMD_HOLD_XMIT, - &ICOM_PORT->dram->CmdReg); + &icom_port->dram->CmdReg); icom_write(port); } static void icom_send_xchar(struct uart_port *port, char ch) { + struct icom_port *icom_port = to_icom_port(port); unsigned char xdata; int index; unsigned long flags; - trace(ICOM_PORT, "SEND_XCHAR", ch); + trace(icom_port, "SEND_XCHAR", ch); /* wait .1 sec to send char */ for (index = 0; index < 10; index++) { spin_lock_irqsave(&port->lock, flags); - xdata = readb(&ICOM_PORT->dram->xchar); + xdata = readb(&icom_port->dram->xchar); if (xdata == 0x00) { - trace(ICOM_PORT, "QUICK_WRITE", 0); - writeb(ch, &ICOM_PORT->dram->xchar); + trace(icom_port, "QUICK_WRITE", 0); + writeb(ch, &icom_port->dram->xchar); /* flush write operation */ - xdata = readb(&ICOM_PORT->dram->xchar); + xdata = readb(&icom_port->dram->xchar); spin_unlock_irqrestore(&port->lock, flags); break; } @@ -1031,38 +1294,41 @@ static void icom_send_xchar(struct uart_port *port, char ch) static void icom_stop_rx(struct uart_port *port) { + struct icom_port *icom_port = to_icom_port(port); unsigned char cmdReg; - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); + cmdReg = readb(&icom_port->dram->CmdReg); + writeb(cmdReg & ~CMD_RCV_ENABLE, &icom_port->dram->CmdReg); } static void icom_break(struct uart_port *port, int break_state) { + struct icom_port *icom_port = to_icom_port(port); unsigned char cmdReg; unsigned long flags; spin_lock_irqsave(&port->lock, flags); - trace(ICOM_PORT, "BREAK", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); + trace(icom_port, "BREAK", 0); + cmdReg = readb(&icom_port->dram->CmdReg); if (break_state == -1) { - writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_SND_BREAK, &icom_port->dram->CmdReg); } else { - writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); } spin_unlock_irqrestore(&port->lock, flags); } static int icom_open(struct uart_port *port) { + struct icom_port *icom_port = to_icom_port(port); int retval; - kref_get(&ICOM_PORT->adapter->kref); - retval = startup(ICOM_PORT); + kref_get(&icom_port->adapter->kref); + retval = startup(icom_port); if (retval) { - kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); - trace(ICOM_PORT, "STARTUP_ERROR", 0); + kref_put(&icom_port->adapter->kref, icom_kref_release); + trace(icom_port, "STARTUP_ERROR", 0); return retval; } @@ -1071,23 +1337,25 @@ static int icom_open(struct uart_port *port) static void icom_close(struct uart_port *port) { + struct icom_port *icom_port = to_icom_port(port); unsigned char cmdReg; - trace(ICOM_PORT, "CLOSE", 0); + trace(icom_port, "CLOSE", 0); /* stop receiver */ - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); + cmdReg = readb(&icom_port->dram->CmdReg); + writeb(cmdReg & ~CMD_RCV_ENABLE, &icom_port->dram->CmdReg); - shutdown(ICOM_PORT); + shutdown(icom_port); - kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); + kref_put(&icom_port->adapter->kref, icom_kref_release); } static void icom_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old_termios) { + struct icom_port *icom_port = to_icom_port(port); int baud; unsigned cflag, iflag; char new_config2; @@ -1099,7 +1367,7 @@ static void icom_set_termios(struct uart_port *port, unsigned long flags; spin_lock_irqsave(&port->lock, flags); - trace(ICOM_PORT, "CHANGE_SPEED", 0); + trace(icom_port, "CHANGE_SPEED", 0); cflag = termios->c_cflag; iflag = termios->c_iflag; @@ -1130,12 +1398,12 @@ static void icom_set_termios(struct uart_port *port, if (cflag & PARENB) { /* parity bit enabled */ new_config2 |= ICOM_ACFG_PARITY_ENAB; - trace(ICOM_PORT, "PARENB", 0); + trace(icom_port, "PARENB", 0); } if (cflag & PARODD) { /* odd parity */ new_config2 |= ICOM_ACFG_PARITY_ODD; - trace(ICOM_PORT, "PARODD", 0); + trace(icom_port, "PARODD", 0); } /* Determine divisor based on baud rate */ @@ -1155,100 +1423,99 @@ static void icom_set_termios(struct uart_port *port, uart_update_timeout(port, cflag, baud); /* CTS flow control flag and modem status interrupts */ - tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + tmp_byte = readb(&(icom_port->dram->HDLCConfigReg)); if (cflag & CRTSCTS) tmp_byte |= HDLC_HDW_FLOW; else tmp_byte &= ~HDLC_HDW_FLOW; - writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + writeb(tmp_byte, &(icom_port->dram->HDLCConfigReg)); /* * Set up parity check flag */ - ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; + icom_port->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; if (iflag & INPCK) - ICOM_PORT->read_status_mask |= + icom_port->read_status_mask |= SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; if ((iflag & BRKINT) || (iflag & PARMRK)) - ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; + icom_port->read_status_mask |= SA_FLAGS_BREAK_DET; /* * Characters to ignore */ - ICOM_PORT->ignore_status_mask = 0; + icom_port->ignore_status_mask = 0; if (iflag & IGNPAR) - ICOM_PORT->ignore_status_mask |= + icom_port->ignore_status_mask |= SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; if (iflag & IGNBRK) { - ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; + icom_port->ignore_status_mask |= SA_FLAGS_BREAK_DET; /* * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ if (iflag & IGNPAR) - ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; + icom_port->ignore_status_mask |= SA_FLAGS_OVERRUN; } /* * !!! ignore all characters if CREAD is not set */ if ((cflag & CREAD) == 0) - ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; + icom_port->ignore_status_mask |= SA_FL_RCV_DONE; /* Turn off Receiver to prepare for reset */ - writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); + writeb(CMD_RCV_DISABLE, &icom_port->dram->CmdReg); for (index = 0; index < 10; index++) { - if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { + if (readb(&icom_port->dram->PrevCmdReg) == 0x00) { break; } } /* clear all current buffers of data */ for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { - ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; - ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; - ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + icom_port->statStg->rcv[rcv_buff].flags = 0; + icom_port->statStg->rcv[rcv_buff].leLength = 0; + icom_port->statStg->rcv[rcv_buff].WorkingLength = + cpu_to_le16(RCV_BUFF_SZ); } for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { - ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; + icom_port->statStg->xmit[xmit_buff].flags = 0; } /* activate changes and start xmit and receiver here */ /* Enable the receiver */ - writeb(new_config3, &(ICOM_PORT->dram->async_config3)); - writeb(new_config2, &(ICOM_PORT->dram->async_config2)); - tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + writeb(new_config3, &(icom_port->dram->async_config3)); + writeb(new_config2, &(icom_port->dram->async_config2)); + tmp_byte = readb(&(icom_port->dram->HDLCConfigReg)); tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; - writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); - writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ - writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ + writeb(tmp_byte, &(icom_port->dram->HDLCConfigReg)); + writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0xFF, &(icom_port->dram->ier)); /* enable modem signal interrupts */ /* reset processor */ - writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); + writeb(CMD_RESTART, &icom_port->dram->CmdReg); for (index = 0; index < 10; index++) { - if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { + if (readb(&icom_port->dram->CmdReg) == 0x00) { break; } } /* Enable Transmitter and Receiver */ offset = - (unsigned long) &ICOM_PORT->statStg->rcv[0] - - (unsigned long) ICOM_PORT->statStg; - writel(ICOM_PORT->statStg_pci + offset, - &ICOM_PORT->dram->RcvStatusAddr); - ICOM_PORT->next_rcv = 0; - ICOM_PORT->put_length = 0; - *ICOM_PORT->xmitRestart = 0; - writel(ICOM_PORT->xmitRestart_pci, - &ICOM_PORT->dram->XmitStatusAddr); - trace(ICOM_PORT, "XR_ENAB", 0); - writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); + (unsigned long) &icom_port->statStg->rcv[0] - + (unsigned long) icom_port->statStg; + writel(icom_port->statStg_pci + offset, + &icom_port->dram->RcvStatusAddr); + icom_port->next_rcv = 0; + *icom_port->xmitRestart = 0; + writel(icom_port->xmitRestart_pci, + &icom_port->dram->XmitStatusAddr); + trace(icom_port, "XR_ENAB", 0); + writeb(CMD_XMIT_RCV_ENABLE, &icom_port->dram->CmdReg); spin_unlock_irqrestore(&port->lock, flags); } @@ -1258,15 +1525,6 @@ static const char *icom_type(struct uart_port *port) return "icom"; } -static void icom_release_port(struct uart_port *port) -{ -} - -static int icom_request_port(struct uart_port *port) -{ - return 0; -} - static void icom_config_port(struct uart_port *port, int flags) { port->type = PORT_ICOM; @@ -1285,8 +1543,6 @@ static const struct uart_ops icom_ops = { .shutdown = icom_close, .set_termios = icom_set_termios, .type = icom_type, - .release_port = icom_release_port, - .request_port = icom_request_port, .config_port = icom_config_port, }; @@ -1315,7 +1571,6 @@ static int icom_init_ports(struct icom_adapter *icom_adapter) icom_port = &icom_adapter->port_info[i]; icom_port->port = i; icom_port->status = ICOM_PORT_ACTIVE; - icom_port->imbed_modem = ICOM_UNKNOWN; } } else { if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { @@ -1326,26 +1581,15 @@ static int icom_init_ports(struct icom_adapter *icom_adapter) icom_port->port = i; icom_port->status = ICOM_PORT_ACTIVE; - icom_port->imbed_modem = ICOM_IMBED_MODEM; } } else { icom_adapter->numb_ports = 4; icom_adapter->port_info[0].port = 0; icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; - - if (subsystem_id == - PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { - icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; - } else { - icom_adapter->port_info[0].imbed_modem = ICOM_RVX; - } - icom_adapter->port_info[1].status = ICOM_PORT_OFF; - icom_adapter->port_info[2].port = 2; icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; - icom_adapter->port_info[2].imbed_modem = ICOM_RVX; icom_adapter->port_info[3].status = ICOM_PORT_OFF; } } @@ -1401,7 +1645,6 @@ static int icom_alloc_adapter(struct icom_adapter int adapter_count = 0; struct icom_adapter *icom_adapter; struct icom_adapter *cur_adapter_entry; - struct list_head *tmp; icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); @@ -1409,10 +1652,8 @@ static int icom_alloc_adapter(struct icom_adapter return -ENOMEM; } - list_for_each(tmp, &icom_adapter_head) { - cur_adapter_entry = - list_entry(tmp, struct icom_adapter, - icom_adapter_entry); + list_for_each_entry(cur_adapter_entry, &icom_adapter_head, + icom_adapter_entry) { if (cur_adapter_entry->index != adapter_count) { break; } @@ -1420,7 +1661,8 @@ static int icom_alloc_adapter(struct icom_adapter } icom_adapter->index = adapter_count; - list_add_tail(&icom_adapter->icom_adapter_entry, tmp); + list_add_tail(&icom_adapter->icom_adapter_entry, + &cur_adapter_entry->icom_adapter_entry); *icom_adapter_ref = icom_adapter; return 0; @@ -1432,8 +1674,10 @@ static void icom_free_adapter(struct icom_adapter *icom_adapter) kfree(icom_adapter); } -static void icom_remove_adapter(struct icom_adapter *icom_adapter) +static void icom_kref_release(struct kref *kref) { + struct icom_adapter *icom_adapter = container_of(kref, + struct icom_adapter, kref); struct icom_port *icom_port; int index; @@ -1466,14 +1710,6 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter) icom_free_adapter(icom_adapter); } -static void icom_kref_release(struct kref *kref) -{ - struct icom_adapter *icom_adapter; - - icom_adapter = to_icom_adapter(kref); - icom_remove_adapter(icom_adapter); -} - static int icom_probe(struct pci_dev *dev, const struct pci_device_id *ent) { @@ -1501,7 +1737,7 @@ static int icom_probe(struct pci_dev *dev, retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg); if (retval) { dev_err(&dev->dev, "PCI Config read FAILED\n"); - return retval; + goto probe_exit0; } pci_write_config_dword(dev, PCI_COMMAND, @@ -1589,11 +1825,9 @@ probe_exit0: static void icom_remove(struct pci_dev *dev) { struct icom_adapter *icom_adapter; - struct list_head *tmp; - list_for_each(tmp, &icom_adapter_head) { - icom_adapter = list_entry(tmp, struct icom_adapter, - icom_adapter_entry); + list_for_each_entry(icom_adapter, &icom_adapter_head, + icom_adapter_entry) { if (icom_adapter->pci_dev == dev) { kref_put(&icom_adapter->kref, icom_kref_release); return; diff --git a/drivers/tty/serial/icom.h b/drivers/tty/serial/icom.h deleted file mode 100644 index 26e3aa7b01e2..000000000000 --- a/drivers/tty/serial/icom.h +++ /dev/null @@ -1,274 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * icom.h - * - * Copyright (C) 2001 Michael Anderson, IBM Corporation - * - * Serial device driver include file. - */ - -#include <linux/serial_core.h> - -#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) -static int icom_acfg_baud[] = { - 300, - 600, - 900, - 1200, - 1800, - 2400, - 3600, - 4800, - 7200, - 9600, - 14400, - 19200, - 28800, - 38400, - 57600, - 76800, - 115200, - 153600, - 230400, - 307200, - 460800, -}; - -struct icom_regs { - u32 control; /* Adapter Control Register */ - u32 interrupt; /* Adapter Interrupt Register */ - u32 int_mask; /* Adapter Interrupt Mask Reg */ - u32 int_pri; /* Adapter Interrupt Priority r */ - u32 int_reg_b; /* Adapter non-masked Interrupt */ - u32 resvd01; - u32 resvd02; - u32 resvd03; - u32 control_2; /* Adapter Control Register 2 */ - u32 interrupt_2; /* Adapter Interrupt Register 2 */ - u32 int_mask_2; /* Adapter Interrupt Mask 2 */ - u32 int_pri_2; /* Adapter Interrupt Prior 2 */ - u32 int_reg_2b; /* Adapter non-masked 2 */ -}; - -struct func_dram { - u32 reserved[108]; /* 0-1B0 reserved by personality code */ - u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ - u8 RcvStnAddr; /* 1B4 Receive Station Addr */ - u8 IdleState; /* 1B5 Idle State */ - u8 IdleMonitor; /* 1B6 Idle Monitor */ - u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ - u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ - u8 StartXmitCmd; /* 1BC Start Xmit Command */ - u8 HDLCConfigReg; /* 1BD Reserved */ - u8 CauseCode; /* 1BE Cause code for fatal error */ - u8 xchar; /* 1BF High priority send */ - u32 reserved3; /* 1C0-1C3 Reserved */ - u8 PrevCmdReg; /* 1C4 Reserved */ - u8 CmdReg; /* 1C5 Command Register */ - u8 async_config2; /* 1C6 Async Config Byte 2 */ - u8 async_config3; /* 1C7 Async Config Byte 3 */ - u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ - u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ - u8 misc_flags; /* 1DD misc flags */ -#define V2_HARDWARE 0x40 -#define ICOM_HDW_ACTIVE 0x01 - u8 call_length; /* 1DE Phone #/CFI buff ln */ - u8 call_length2; /* 1DF Upper byte (unused) */ - u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ - u16 timer_value; /* 1E4-1E5 general timer value */ - u8 timer_command; /* 1E6 general timer cmd */ - u8 dce_command; /* 1E7 dce command reg */ - u8 dce_cmd_status; /* 1E8 dce command stat */ - u8 x21_r1_ioff; /* 1E9 dce ready counter */ - u8 x21_r0_ioff; /* 1EA dce not ready ctr */ - u8 x21_ralt_ioff; /* 1EB dce CNR counter */ - u8 x21_r1_ion; /* 1EC dce ready I on ctr */ - u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ - u8 ier; /* 1EE Interrupt Enable */ - u8 isr; /* 1EF Input Signal Reg */ - u8 osr; /* 1F0 Output Signal Reg */ - u8 reset; /* 1F1 Reset/Reload Reg */ - u8 disable; /* 1F2 Disable Reg */ - u8 sync; /* 1F3 Sync Reg */ - u8 error_stat; /* 1F4 Error Status */ - u8 cable_id; /* 1F5 Cable ID */ - u8 cs_length; /* 1F6 CS Load Length */ - u8 mac_length; /* 1F7 Mac Load Length */ - u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ - u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ -}; - -/* - * adapter defines and structures - */ -#define ICOM_CONTROL_START_A 0x00000008 -#define ICOM_CONTROL_STOP_A 0x00000004 -#define ICOM_CONTROL_START_B 0x00000002 -#define ICOM_CONTROL_STOP_B 0x00000001 -#define ICOM_CONTROL_START_C 0x00000008 -#define ICOM_CONTROL_STOP_C 0x00000004 -#define ICOM_CONTROL_START_D 0x00000002 -#define ICOM_CONTROL_STOP_D 0x00000001 -#define ICOM_IRAM_OFFSET 0x1000 -#define ICOM_IRAM_SIZE 0x0C00 -#define ICOM_DCE_IRAM_OFFSET 0x0A00 -#define ICOM_CABLE_ID_VALID 0x01 -#define ICOM_CABLE_ID_MASK 0xF0 -#define ICOM_DISABLE 0x80 -#define CMD_XMIT_RCV_ENABLE 0xC0 -#define CMD_XMIT_ENABLE 0x40 -#define CMD_RCV_DISABLE 0x00 -#define CMD_RCV_ENABLE 0x80 -#define CMD_RESTART 0x01 -#define CMD_HOLD_XMIT 0x02 -#define CMD_SND_BREAK 0x04 -#define RS232_CABLE 0x06 -#define V24_CABLE 0x0E -#define V35_CABLE 0x0C -#define V36_CABLE 0x02 -#define NO_CABLE 0x00 -#define START_DOWNLOAD 0x80 -#define ICOM_INT_MASK_PRC_A 0x00003FFF -#define ICOM_INT_MASK_PRC_B 0x3FFF0000 -#define ICOM_INT_MASK_PRC_C 0x00003FFF -#define ICOM_INT_MASK_PRC_D 0x3FFF0000 -#define INT_RCV_COMPLETED 0x1000 -#define INT_XMIT_COMPLETED 0x2000 -#define INT_IDLE_DETECT 0x0800 -#define INT_RCV_DISABLED 0x0400 -#define INT_XMIT_DISABLED 0x0200 -#define INT_RCV_XMIT_SHUTDOWN 0x0100 -#define INT_FATAL_ERROR 0x0080 -#define INT_CABLE_PULL 0x0020 -#define INT_SIGNAL_CHANGE 0x0010 -#define HDLC_PPP_PURE_ASYNC 0x02 -#define HDLC_FF_FILL 0x00 -#define HDLC_HDW_FLOW 0x01 -#define START_XMIT 0x80 -#define ICOM_ACFG_DRIVE1 0x20 -#define ICOM_ACFG_NO_PARITY 0x00 -#define ICOM_ACFG_PARITY_ENAB 0x02 -#define ICOM_ACFG_PARITY_ODD 0x01 -#define ICOM_ACFG_8BPC 0x00 -#define ICOM_ACFG_7BPC 0x04 -#define ICOM_ACFG_6BPC 0x08 -#define ICOM_ACFG_5BPC 0x0C -#define ICOM_ACFG_1STOP_BIT 0x00 -#define ICOM_ACFG_2STOP_BIT 0x10 -#define ICOM_DTR 0x80 -#define ICOM_RTS 0x40 -#define ICOM_RI 0x08 -#define ICOM_DSR 0x80 -#define ICOM_DCD 0x20 -#define ICOM_CTS 0x40 - -#define NUM_XBUFFS 1 -#define NUM_RBUFFS 2 -#define RCV_BUFF_SZ 0x0200 -#define XMIT_BUFF_SZ 0x1000 -struct statusArea { - /**********************************************/ - /* Transmit Status Area */ - /**********************************************/ - struct xmit_status_area{ - u32 leNext; /* Next entry in Little Endian on Adapter */ - u32 leNextASD; - u32 leBuffer; /* Buffer for entry in LE for Adapter */ - u16 leLengthASD; - u16 leOffsetASD; - u16 leLength; /* Length of data in segment */ - u16 flags; -#define SA_FLAGS_DONE 0x0080 /* Done with Segment */ -#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ -#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ -#define SA_FLAGS_READY_TO_XMIT 0x0800 -#define SA_FLAGS_STAT_MASK 0x007F - } xmit[NUM_XBUFFS]; - - /**********************************************/ - /* Receive Status Area */ - /**********************************************/ - struct { - u32 leNext; /* Next entry in Little Endian on Adapter */ - u32 leNextASD; - u32 leBuffer; /* Buffer for entry in LE for Adapter */ - u16 WorkingLength; /* size of segment */ - u16 reserv01; - u16 leLength; /* Length of data in segment */ - u16 flags; -#define SA_FL_RCV_DONE 0x0010 /* Data ready */ -#define SA_FLAGS_OVERRUN 0x0040 -#define SA_FLAGS_PARITY_ERROR 0x0080 -#define SA_FLAGS_FRAME_ERROR 0x0001 -#define SA_FLAGS_FRAME_TRUNC 0x0002 -#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ -#define SA_FLAGS_RCV_MASK 0xFFE6 - } rcv[NUM_RBUFFS]; -}; - -struct icom_adapter; - - -#define ICOM_MAJOR 243 -#define ICOM_MINOR_START 0 - -struct icom_port { - struct uart_port uart_port; - u8 imbed_modem; -#define ICOM_UNKNOWN 1 -#define ICOM_RVX 2 -#define ICOM_IMBED_MODEM 3 - unsigned char cable_id; - unsigned char read_status_mask; - unsigned char ignore_status_mask; - void __iomem * int_reg; - struct icom_regs __iomem *global_reg; - struct func_dram __iomem *dram; - int port; - struct statusArea *statStg; - dma_addr_t statStg_pci; - u32 *xmitRestart; - dma_addr_t xmitRestart_pci; - unsigned char *xmit_buf; - dma_addr_t xmit_buf_pci; - unsigned char *recv_buf; - dma_addr_t recv_buf_pci; - int next_rcv; - int put_length; - int status; -#define ICOM_PORT_ACTIVE 1 /* Port exists. */ -#define ICOM_PORT_OFF 0 /* Port does not exist. */ - int load_in_progress; - struct icom_adapter *adapter; -}; - -struct icom_adapter { - void __iomem * base_addr; - unsigned long base_addr_pci; - struct pci_dev *pci_dev; - struct icom_port port_info[4]; - int index; - int version; -#define ADAPTER_V1 0x0001 -#define ADAPTER_V2 0x0002 - u32 subsystem_id; -#define FOUR_PORT_MODEL 0x0252 -#define V2_TWO_PORTS_RVX 0x021A -#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 - int numb_ports; - struct list_head icom_adapter_entry; - struct kref kref; -}; - -/* prototype */ -extern void iCom_sercons_init(void); - -struct lookup_proc_table { - u32 __iomem *global_control_reg; - unsigned long processor_id; -}; - -struct lookup_int_table { - u32 __iomem *global_int_mask; - unsigned long processor_id; -}; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index b1639b174292..30edb35a6a15 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1937,8 +1937,6 @@ static int imx_uart_rs485_config(struct uart_port *port, rs485conf->flags & SER_RS485_RX_DURING_TX) imx_uart_start_rx(port); - port->rs485 = *rs485conf; - return 0; } diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c index 444f233ebd1f..3fd57ac3ad81 100644 --- a/drivers/tty/serial/jsm/jsm_cls.c +++ b/drivers/tty/serial/jsm/jsm_cls.c @@ -689,7 +689,7 @@ static void cls_param(struct jsm_channel *ch) /* * If baud rate is zero, flush queues, and set mval to drop DTR. */ - if ((ch->ch_c_cflag & (CBAUD)) == 0) { + if ((ch->ch_c_cflag & CBAUD) == B0) { ch->ch_r_head = 0; ch->ch_r_tail = 0; ch->ch_e_head = 0; @@ -723,14 +723,8 @@ static void cls_param(struct jsm_channel *ch) if (!(ch->ch_c_cflag & PARODD)) lcr |= UART_LCR_EPAR; - /* - * Not all platforms support mark/space parity, - * so this will hide behind an ifdef. - */ -#ifdef CMSPAR if (ch->ch_c_cflag & CMSPAR) lcr |= UART_LCR_SPAR; -#endif if (ch->ch_c_cflag & CSTOPB) lcr |= UART_LCR_STOP; diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c index 110696cdaa1d..0c78f66276cd 100644 --- a/drivers/tty/serial/jsm/jsm_neo.c +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -938,7 +938,7 @@ static void neo_param(struct jsm_channel *ch) /* * If baud rate is zero, flush queues, and set mval to drop DTR. */ - if ((ch->ch_c_cflag & (CBAUD)) == 0) { + if ((ch->ch_c_cflag & CBAUD) == B0) { ch->ch_r_head = ch->ch_r_tail = 0; ch->ch_e_head = ch->ch_e_tail = 0; @@ -997,14 +997,8 @@ static void neo_param(struct jsm_channel *ch) if (!(ch->ch_c_cflag & PARODD)) lcr |= UART_LCR_EPAR; - /* - * Not all platforms support mark/space parity, - * so this will hide behind an ifdef. - */ -#ifdef CMSPAR if (ch->ch_c_cflag & CMSPAR) lcr |= UART_LCR_SPAR; -#endif if (ch->ch_c_cflag & CSTOPB) lcr |= UART_LCR_STOP; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 3112b4a05448..a0b6ea52d133 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1037,7 +1037,6 @@ static int max310x_rs485_config(struct uart_port *port, rs485->flags &= SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX | SER_RS485_ENABLED; - memset(rs485->padding, 0, sizeof(rs485->padding)); port->rs485 = *rs485; schedule_work(&one->rs_work); diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index 9acae5f8fc32..12117b596e73 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -833,7 +833,6 @@ static int men_z135_probe(struct mcb_device *mdev, uart->port.iotype = UPIO_MEM; uart->port.ops = &men_z135_ops; uart->port.irq = mcb_get_irq(mdev); - uart->port.iotype = UPIO_MEM; uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; uart->port.line = line++; uart->port.dev = dev; diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 2bf1c57e0981..4869c0059c98 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -68,6 +68,7 @@ #define AML_UART_BAUD_MASK 0x7fffff #define AML_UART_BAUD_USE BIT(23) #define AML_UART_BAUD_XTAL BIT(24) +#define AML_UART_BAUD_XTAL_DIV2 BIT(27) #define AML_UART_PORT_NUM 12 #define AML_UART_PORT_OFFSET 6 @@ -80,6 +81,10 @@ static struct uart_driver meson_uart_driver; static struct uart_port *meson_ports[AML_UART_PORT_NUM]; +struct meson_uart_data { + bool has_xtal_div2; +}; + static void meson_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { } @@ -253,6 +258,14 @@ static const char *meson_uart_type(struct uart_port *port) return (port->type == PORT_MESON) ? "meson_uart" : NULL; } +/* + * This function is called only from probe() using a temporary io mapping + * in order to perform a reset before setting up the device. Since the + * temporarily mapped region was successfully requested, there can be no + * console on this port at this time. Hence it is not necessary for this + * function to acquire the port->lock. (Since there is no console on this + * port at this time, the port->lock is not initialized yet.) + */ static void meson_uart_reset(struct uart_port *port) { u32 val; @@ -267,9 +280,12 @@ static void meson_uart_reset(struct uart_port *port) static int meson_uart_startup(struct uart_port *port) { + unsigned long flags; u32 val; int ret = 0; + spin_lock_irqsave(&port->lock, flags); + val = readl(port->membase + AML_UART_CONTROL); val |= AML_UART_CLEAR_ERR; writel(val, port->membase + AML_UART_CONTROL); @@ -285,6 +301,8 @@ static int meson_uart_startup(struct uart_port *port) val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2)); writel(val, port->membase + AML_UART_MISC); + spin_unlock_irqrestore(&port->lock, flags); + ret = request_irq(port->irq, meson_uart_interrupt, 0, port->name, port); @@ -293,16 +311,23 @@ static int meson_uart_startup(struct uart_port *port) static void meson_uart_change_speed(struct uart_port *port, unsigned long baud) { - u32 val; + const struct meson_uart_data *private_data = port->private_data; + u32 val = 0; while (!meson_uart_tx_empty(port)) cpu_relax(); if (port->uartclk == 24000000) { - val = ((port->uartclk / 3) / baud) - 1; + unsigned int xtal_div = 3; + + if (private_data && private_data->has_xtal_div2) { + xtal_div = 2; + val |= AML_UART_BAUD_XTAL_DIV2; + } + val |= DIV_ROUND_CLOSEST(port->uartclk / xtal_div, baud) - 1; val |= AML_UART_BAUD_XTAL; } else { - val = ((port->uartclk * 10 / (baud * 4) + 5) / 10) - 1; + val = DIV_ROUND_CLOSEST(port->uartclk / 4, baud) - 1; } val |= AML_UART_BAUD_USE; writel(val, port->membase + AML_UART_REG5); @@ -749,6 +774,7 @@ static int meson_uart_probe(struct platform_device *pdev) port->x_char = 0; port->ops = &meson_uart_ops; port->fifosize = fifosize; + port->private_data = (void *)device_get_match_data(&pdev->dev); meson_ports[pdev->id] = port; platform_set_drvdata(pdev, port); @@ -777,11 +803,19 @@ static int meson_uart_remove(struct platform_device *pdev) return 0; } +static struct meson_uart_data s4_uart_data = { + .has_xtal_div2 = true, +}; + static const struct of_device_id meson_uart_dt_match[] = { { .compatible = "amlogic,meson6-uart" }, { .compatible = "amlogic,meson8-uart" }, { .compatible = "amlogic,meson8b-uart" }, { .compatible = "amlogic,meson-gx-uart" }, + { + .compatible = "amlogic,meson-s4-uart", + .data = (void *)&s4_uart_data, + }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, meson_uart_dt_match); diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 3acc0f185762..e50f069b5ebb 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -38,6 +38,8 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/clk.h> @@ -754,9 +756,6 @@ static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) port->irqflags = IRQF_SHARED; port->irq = psc_fifoc_irq; } -#endif - -#ifdef CONFIG_PPC_MPC512x #define PSC_5125(port) ((struct mpc5125_psc __iomem *)((port)->membase)) #define FIFO_5125(port) ((struct mpc512x_psc_fifo __iomem *)(PSC_5125(port)+1)) diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 23c94b927776..e676ec761f18 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -1599,6 +1599,7 @@ static inline struct uart_port *msm_get_port_from_line(unsigned int line) static void __msm_console_write(struct uart_port *port, const char *s, unsigned int count, bool is_uartdm) { + unsigned long flags; int i; int num_newlines = 0; bool replaced = false; @@ -1616,6 +1617,8 @@ static void __msm_console_write(struct uart_port *port, const char *s, num_newlines++; count += num_newlines; + local_irq_save(flags); + if (port->sysrq) locked = 0; else if (oops_in_progress) @@ -1661,6 +1664,8 @@ static void __msm_console_write(struct uart_port *port, const char *s, if (locked) spin_unlock(&port->lock); + + local_irq_restore(flags); } static void msm_console_write(struct console *co, const char *s, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 8d5ffa196097..46f4d4cacb6e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1336,18 +1336,11 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) up->ier = 0; serial_out(up, UART_IER, 0); - /* Clamp the delays to [0, 100ms] */ - rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U); - rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U); - - /* store new config */ - port->rs485 = *rs485; - if (up->rts_gpiod) { /* enable / disable rts */ - val = (port->rs485.flags & SER_RS485_ENABLED) ? + val = (rs485->flags & SER_RS485_ENABLED) ? SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; - val = (port->rs485.flags & val) ? 1 : 0; + val = (rs485->flags & val) ? 1 : 0; gpiod_set_value(up->rts_gpiod, val); } @@ -1358,7 +1351,7 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) /* If RS-485 is disabled, make sure the THR interrupt is fired when * TX FIFO is below the trigger level. */ - if (!(port->rs485.flags & SER_RS485_ENABLED) && + if (!(rs485->flags & SER_RS485_ENABLED) && (up->scr & OMAP_UART_SCR_TX_EMPTY)) { up->scr &= ~OMAP_UART_SCR_TX_EMPTY; serial_out(up, UART_OMAP_SCR, up->scr); diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index 5250bd7d390a..44d20e5a7dd3 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -184,9 +184,6 @@ static void owl_uart_send_chars(struct uart_port *port) struct circ_buf *xmit = &port->state->xmit; unsigned int ch; - if (uart_tx_stopped(port)) - return; - if (port->x_char) { while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) cpu_relax(); @@ -195,6 +192,9 @@ static void owl_uart_send_chars(struct uart_port *port) port->x_char = 0; } + if (uart_tx_stopped(port)) + return; + while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) { if (uart_circ_empty(xmit)) break; @@ -731,6 +731,7 @@ static int owl_uart_probe(struct platform_device *pdev) owl_port->port.uartclk = clk_get_rate(owl_port->clk); if (owl_port->port.uartclk == 0) { dev_err(&pdev->dev, "clock rate is zero\n"); + clk_disable_unprepare(owl_port->clk); return -EINVAL; } owl_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY; diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index affe71f8b50c..3b26524d48e3 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -550,18 +550,6 @@ static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) return (u8)msr; } -static void pch_uart_hal_write(struct eg20t_port *priv, - const unsigned char *buf, int tx_size) -{ - int i; - unsigned int thr; - - for (i = 0; i < tx_size;) { - thr = buf[i++]; - iowrite8(thr, priv->membase + PCH_UART_THR); - } -} - static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, int rx_size) { @@ -624,22 +612,6 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf, return 0; } -static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) -{ - int ret = 0; - struct uart_port *port = &priv->port; - - if (port->x_char) { - dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n", - __func__, port->x_char, jiffies); - buf[0] = port->x_char; - port->x_char = 0; - ret = 1; - } - - return ret; -} - static int dma_push_rx(struct eg20t_port *priv, int size) { int room; @@ -785,31 +757,6 @@ static void pch_dma_tx_complete(void *arg) pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); } -static int pop_tx(struct eg20t_port *priv, int size) -{ - int count = 0; - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - - if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size) - goto pop_tx_end; - - do { - int cnt_to_end = - CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - int sz = min(size - count, cnt_to_end); - pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz); - xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); - count += sz; - } while (!uart_circ_empty(xmit) && count < size); - -pop_tx_end: - dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n", - count, size - count, jiffies); - - return count; -} - static int handle_rx_to(struct eg20t_port *priv) { struct pch_uart_buffer *buf; @@ -875,8 +822,6 @@ static unsigned int handle_tx(struct eg20t_port *priv) struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; int fifo_size; - int tx_size; - int size; int tx_empty; if (!priv->start_tx) { @@ -889,19 +834,19 @@ static unsigned int handle_tx(struct eg20t_port *priv) fifo_size = max(priv->fifo_size, 1); tx_empty = 1; - if (pop_tx_x(priv, xmit->buf)) { - pch_uart_hal_write(priv, xmit->buf, 1); + if (port->x_char) { + iowrite8(port->x_char, priv->membase + PCH_UART_THR); port->icount.tx++; + port->x_char = 0; tx_empty = 0; fifo_size--; } - size = min(xmit->head - xmit->tail, fifo_size); - if (size < 0) - size = fifo_size; - tx_size = pop_tx(priv, size); - if (tx_size > 0) { - port->icount.tx += tx_size; + while (!uart_tx_stopped(port) && !uart_circ_empty(xmit) && fifo_size) { + iowrite8(xmit->buf[xmit->tail], priv->membase + PCH_UART_THR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + fifo_size--; tx_empty = 0; } @@ -946,9 +891,11 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) } fifo_size = max(priv->fifo_size, 1); - if (pop_tx_x(priv, xmit->buf)) { - pch_uart_hal_write(priv, xmit->buf, 1); + + if (port->x_char) { + iowrite8(port->x_char, priv->membase + PCH_UART_THR); port->icount.tx++; + port->x_char = 0; fifo_size--; } diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c index b7a3a1b959b1..b399aac530fe 100644 --- a/drivers/tty/serial/pic32_uart.c +++ b/drivers/tty/serial/pic32_uart.c @@ -25,38 +25,114 @@ #include <linux/delay.h> #include <asm/mach-pic32/pic32.h> -#include "pic32_uart.h" /* UART name and device definitions */ #define PIC32_DEV_NAME "pic32-uart" #define PIC32_MAX_UARTS 6 #define PIC32_SDEV_NAME "ttyPIC" -/* pic32_sport pointer for console use */ -static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS]; +#define PIC32_UART_DFLT_BRATE 9600 +#define PIC32_UART_TX_FIFO_DEPTH 8 +#define PIC32_UART_RX_FIFO_DEPTH 8 + +#define PIC32_UART_MODE 0x00 +#define PIC32_UART_STA 0x10 +#define PIC32_UART_TX 0x20 +#define PIC32_UART_RX 0x30 +#define PIC32_UART_BRG 0x40 + +/* struct pic32_sport - pic32 serial port descriptor + * @port: uart port descriptor + * @idx: port index + * @irq_fault: virtual fault interrupt number + * @irq_fault_name: irq fault name + * @irq_rx: virtual rx interrupt number + * @irq_rx_name: irq rx name + * @irq_tx: virtual tx interrupt number + * @irq_tx_name: irq tx name + * @cts_gpio: clear to send gpio + * @dev: device descriptor + **/ +struct pic32_sport { + struct uart_port port; + int idx; + + int irq_fault; + const char *irq_fault_name; + int irq_rx; + const char *irq_rx_name; + int irq_tx; + const char *irq_tx_name; + bool enable_tx_irq; + + bool hw_flow_ctrl; + int cts_gpio; + + struct clk *clk; + + struct device *dev; +}; -static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport) +static inline struct pic32_sport *to_pic32_sport(struct uart_port *port) { - /* wait for tx empty, otherwise chars will be lost or corrupted */ - while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT)) - udelay(1); + return container_of(port, struct pic32_sport, port); } -static inline int pic32_enable_clock(struct pic32_sport *sport) +static inline void pic32_uart_writel(struct pic32_sport *sport, + u32 reg, u32 val) { - int ret = clk_prepare_enable(sport->clk); - - if (ret) - return ret; + __raw_writel(val, sport->port.membase + reg); +} - sport->ref_clk++; - return 0; +static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg) +{ + return __raw_readl(sport->port.membase + reg); } -static inline void pic32_disable_clock(struct pic32_sport *sport) +/* pic32 uart mode register bits */ +#define PIC32_UART_MODE_ON BIT(15) +#define PIC32_UART_MODE_FRZ BIT(14) +#define PIC32_UART_MODE_SIDL BIT(13) +#define PIC32_UART_MODE_IREN BIT(12) +#define PIC32_UART_MODE_RTSMD BIT(11) +#define PIC32_UART_MODE_RESV1 BIT(10) +#define PIC32_UART_MODE_UEN1 BIT(9) +#define PIC32_UART_MODE_UEN0 BIT(8) +#define PIC32_UART_MODE_WAKE BIT(7) +#define PIC32_UART_MODE_LPBK BIT(6) +#define PIC32_UART_MODE_ABAUD BIT(5) +#define PIC32_UART_MODE_RXINV BIT(4) +#define PIC32_UART_MODE_BRGH BIT(3) +#define PIC32_UART_MODE_PDSEL1 BIT(2) +#define PIC32_UART_MODE_PDSEL0 BIT(1) +#define PIC32_UART_MODE_STSEL BIT(0) + +/* pic32 uart status register bits */ +#define PIC32_UART_STA_UTXISEL1 BIT(15) +#define PIC32_UART_STA_UTXISEL0 BIT(14) +#define PIC32_UART_STA_UTXINV BIT(13) +#define PIC32_UART_STA_URXEN BIT(12) +#define PIC32_UART_STA_UTXBRK BIT(11) +#define PIC32_UART_STA_UTXEN BIT(10) +#define PIC32_UART_STA_UTXBF BIT(9) +#define PIC32_UART_STA_TRMT BIT(8) +#define PIC32_UART_STA_URXISEL1 BIT(7) +#define PIC32_UART_STA_URXISEL0 BIT(6) +#define PIC32_UART_STA_ADDEN BIT(5) +#define PIC32_UART_STA_RIDLE BIT(4) +#define PIC32_UART_STA_PERR BIT(3) +#define PIC32_UART_STA_FERR BIT(2) +#define PIC32_UART_STA_OERR BIT(1) +#define PIC32_UART_STA_URXDA BIT(0) + +/* pic32_sport pointer for console use */ +static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS]; + +static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport) { - sport->ref_clk--; - clk_disable_unprepare(sport->clk); + /* wait for tx empty, otherwise chars will be lost or corrupted */ + while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT)) + udelay(1); } /* serial core request to check if uart tx buffer is empty */ @@ -117,16 +193,16 @@ static unsigned int pic32_uart_get_mctrl(struct uart_port *port) */ static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en) { - if (en && !tx_irq_enabled(sport)) { + if (en && !sport->enable_tx_irq) { enable_irq(sport->irq_tx); - tx_irq_enabled(sport) = 1; - } else if (!en && tx_irq_enabled(sport)) { + sport->enable_tx_irq = true; + } else if (!en && sport->enable_tx_irq) { /* use disable_irq_nosync() and not disable_irq() to avoid self * imposed deadlock by not waiting for irq handler to end, * since this callback is called from interrupt context. */ disable_irq_nosync(sport->irq_tx); - tx_irq_enabled(sport) = 0; + sport->enable_tx_irq = false; } } @@ -395,7 +471,7 @@ static int pic32_uart_startup(struct uart_port *port) local_irq_save(flags); - ret = pic32_enable_clock(sport); + ret = clk_prepare_enable(sport->clk); if (ret) { local_irq_restore(flags); goto out_done; @@ -419,7 +495,7 @@ static int pic32_uart_startup(struct uart_port *port) * For each irq request_irq() is called with interrupt disabled. * And the irq is enabled as soon as we are ready to handle them. */ - tx_irq_enabled(sport) = 0; + sport->enable_tx_irq = false; sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault", pic32_uart_type(port), @@ -431,7 +507,7 @@ static int pic32_uart_startup(struct uart_port *port) } irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN); ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt, - sport->irqflags_fault, sport->irq_fault_name, port); + IRQF_NO_THREAD, sport->irq_fault_name, port); if (ret) { dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", __func__, sport->irq_fault, ret, @@ -449,7 +525,7 @@ static int pic32_uart_startup(struct uart_port *port) } irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN); ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt, - sport->irqflags_rx, sport->irq_rx_name, port); + IRQF_NO_THREAD, sport->irq_rx_name, port); if (ret) { dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", __func__, sport->irq_rx, ret, @@ -467,7 +543,7 @@ static int pic32_uart_startup(struct uart_port *port) } irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN); ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt, - sport->irqflags_tx, sport->irq_tx_name, port); + IRQF_NO_THREAD, sport->irq_tx_name, port); if (ret) { dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", __func__, sport->irq_tx, ret, @@ -488,19 +564,21 @@ static int pic32_uart_startup(struct uart_port *port) /* enable all interrupts and eanable uart */ pic32_uart_en_and_unmask(port); + local_irq_restore(flags); + enable_irq(sport->irq_rx); return 0; out_t: - kfree(sport->irq_tx_name); free_irq(sport->irq_tx, port); + kfree(sport->irq_tx_name); out_r: - kfree(sport->irq_rx_name); free_irq(sport->irq_rx, port); + kfree(sport->irq_rx_name); out_f: - kfree(sport->irq_fault_name); free_irq(sport->irq_fault, port); + kfree(sport->irq_fault_name); out_done: return ret; } @@ -515,12 +593,15 @@ static void pic32_uart_shutdown(struct uart_port *port) spin_lock_irqsave(&port->lock, flags); pic32_uart_dsbl_and_mask(port); spin_unlock_irqrestore(&port->lock, flags); - pic32_disable_clock(sport); + clk_disable_unprepare(sport->clk); /* free all 3 interrupts for this UART */ free_irq(sport->irq_fault, port); + kfree(sport->irq_fault_name); free_irq(sport->irq_tx, port); + kfree(sport->irq_tx_name); free_irq(sport->irq_rx, port); + kfree(sport->irq_rx_name); } /* serial core request to change current uart setting */ @@ -712,10 +793,9 @@ static void pic32_console_write(struct console *co, const char *s, unsigned int count) { struct pic32_sport *sport = pic32_sports[co->index]; - struct uart_port *port = pic32_get_port(sport); /* call uart helper to deal with \r\n */ - uart_console_write(port, s, count, pic32_console_putchar); + uart_console_write(&sport->port, s, count, pic32_console_putchar); } /* console core request to setup given console, find matching uart @@ -724,7 +804,6 @@ static void pic32_console_write(struct console *co, const char *s, static int pic32_console_setup(struct console *co, char *options) { struct pic32_sport *sport; - struct uart_port *port = NULL; int baud = 115200; int bits = 8; int parity = 'n'; @@ -737,16 +816,15 @@ static int pic32_console_setup(struct console *co, char *options) sport = pic32_sports[co->index]; if (!sport) return -ENODEV; - port = pic32_get_port(sport); - ret = pic32_enable_clock(sport); + ret = clk_prepare_enable(sport->clk); if (ret) return ret; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(port, co, baud, parity, bits, flow); + return uart_set_options(&sport->port, co, baud, parity, bits, flow); } static struct uart_driver pic32_uart_driver; @@ -816,13 +894,9 @@ static int pic32_uart_probe(struct platform_device *pdev) sport->idx = uart_idx; sport->irq_fault = irq_of_parse_and_map(np, 0); - sport->irqflags_fault = IRQF_NO_THREAD; sport->irq_rx = irq_of_parse_and_map(np, 1); - sport->irqflags_rx = IRQF_NO_THREAD; sport->irq_tx = irq_of_parse_and_map(np, 2); - sport->irqflags_tx = IRQF_NO_THREAD; sport->clk = devm_clk_get(&pdev->dev, NULL); - sport->cts_gpio = -EINVAL; sport->dev = &pdev->dev; /* Hardware flow control: gpios @@ -850,7 +924,6 @@ static int pic32_uart_probe(struct platform_device *pdev) pic32_sports[uart_idx] = sport; port = &sport->port; - memset(port, 0, sizeof(*port)); port->iotype = UPIO_MEM; port->mapbase = res_mem->start; port->ops = &pic32_uart_ops; @@ -872,7 +945,7 @@ static int pic32_uart_probe(struct platform_device *pdev) /* The peripheral clock has been enabled by console_setup, * so disable it till the port is used. */ - pic32_disable_clock(sport); + clk_disable_unprepare(sport->clk); } #endif @@ -893,7 +966,7 @@ static int pic32_uart_remove(struct platform_device *pdev) struct pic32_sport *sport = to_pic32_sport(port); uart_remove_one_port(&pic32_uart_driver, port); - pic32_disable_clock(sport); + clk_disable_unprepare(sport->clk); platform_set_drvdata(pdev, NULL); pic32_sports[sport->idx] = NULL; diff --git a/drivers/tty/serial/pic32_uart.h b/drivers/tty/serial/pic32_uart.h deleted file mode 100644 index b15639cc336b..000000000000 --- a/drivers/tty/serial/pic32_uart.h +++ /dev/null @@ -1,125 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * PIC32 Integrated Serial Driver. - * - * Copyright (C) 2015 Microchip Technology, Inc. - * - * Authors: - * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com> - */ -#ifndef __DT_PIC32_UART_H__ -#define __DT_PIC32_UART_H__ - -#define PIC32_UART_DFLT_BRATE (9600) -#define PIC32_UART_TX_FIFO_DEPTH (8) -#define PIC32_UART_RX_FIFO_DEPTH (8) - -#define PIC32_UART_MODE 0x00 -#define PIC32_UART_STA 0x10 -#define PIC32_UART_TX 0x20 -#define PIC32_UART_RX 0x30 -#define PIC32_UART_BRG 0x40 - -struct pic32_console_opt { - int baud; - int parity; - int bits; - int flow; -}; - -/* struct pic32_sport - pic32 serial port descriptor - * @port: uart port descriptor - * @idx: port index - * @irq_fault: virtual fault interrupt number - * @irqflags_fault: flags related to fault irq - * @irq_fault_name: irq fault name - * @irq_rx: virtual rx interrupt number - * @irqflags_rx: flags related to rx irq - * @irq_rx_name: irq rx name - * @irq_tx: virtual tx interrupt number - * @irqflags_tx: : flags related to tx irq - * @irq_tx_name: irq tx name - * @cts_gpio: clear to send gpio - * @dev: device descriptor - **/ -struct pic32_sport { - struct uart_port port; - struct pic32_console_opt opt; - int idx; - - int irq_fault; - int irqflags_fault; - const char *irq_fault_name; - int irq_rx; - int irqflags_rx; - const char *irq_rx_name; - int irq_tx; - int irqflags_tx; - const char *irq_tx_name; - u8 enable_tx_irq; - - bool hw_flow_ctrl; - int cts_gpio; - - int ref_clk; - struct clk *clk; - - struct device *dev; -}; -#define to_pic32_sport(c) container_of(c, struct pic32_sport, port) -#define pic32_get_port(sport) (&sport->port) -#define pic32_get_opt(sport) (&sport->opt) -#define tx_irq_enabled(sport) (sport->enable_tx_irq) - -static inline void pic32_uart_writel(struct pic32_sport *sport, - u32 reg, u32 val) -{ - struct uart_port *port = pic32_get_port(sport); - - __raw_writel(val, port->membase + reg); -} - -static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg) -{ - struct uart_port *port = pic32_get_port(sport); - - return __raw_readl(port->membase + reg); -} - -/* pic32 uart mode register bits */ -#define PIC32_UART_MODE_ON BIT(15) -#define PIC32_UART_MODE_FRZ BIT(14) -#define PIC32_UART_MODE_SIDL BIT(13) -#define PIC32_UART_MODE_IREN BIT(12) -#define PIC32_UART_MODE_RTSMD BIT(11) -#define PIC32_UART_MODE_RESV1 BIT(10) -#define PIC32_UART_MODE_UEN1 BIT(9) -#define PIC32_UART_MODE_UEN0 BIT(8) -#define PIC32_UART_MODE_WAKE BIT(7) -#define PIC32_UART_MODE_LPBK BIT(6) -#define PIC32_UART_MODE_ABAUD BIT(5) -#define PIC32_UART_MODE_RXINV BIT(4) -#define PIC32_UART_MODE_BRGH BIT(3) -#define PIC32_UART_MODE_PDSEL1 BIT(2) -#define PIC32_UART_MODE_PDSEL0 BIT(1) -#define PIC32_UART_MODE_STSEL BIT(0) - -/* pic32 uart status register bits */ -#define PIC32_UART_STA_UTXISEL1 BIT(15) -#define PIC32_UART_STA_UTXISEL0 BIT(14) -#define PIC32_UART_STA_UTXINV BIT(13) -#define PIC32_UART_STA_URXEN BIT(12) -#define PIC32_UART_STA_UTXBRK BIT(11) -#define PIC32_UART_STA_UTXEN BIT(10) -#define PIC32_UART_STA_UTXBF BIT(9) -#define PIC32_UART_STA_TRMT BIT(8) -#define PIC32_UART_STA_URXISEL1 BIT(7) -#define PIC32_UART_STA_URXISEL0 BIT(6) -#define PIC32_UART_STA_ADDEN BIT(5) -#define PIC32_UART_STA_RIDLE BIT(4) -#define PIC32_UART_STA_PERR BIT(3) -#define PIC32_UART_STA_FERR BIT(2) -#define PIC32_UART_STA_OERR BIT(1) -#define PIC32_UART_STA_URXDA BIT(0) - -#endif /* __DT_PIC32_UART_H__ */ diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 5d97c201ad88..3133446e806c 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -24,7 +24,6 @@ */ #undef DEBUG -#undef DEBUG_HARD #undef USE_CTRL_O_SYSRQ #include <linux/module.h> @@ -51,7 +50,6 @@ #include <asm/irq.h> #ifdef CONFIG_PPC_PMAC -#include <asm/prom.h> #include <asm/machdep.h> #include <asm/pmac_feature.h> #include <asm/dbdma.h> @@ -66,10 +64,6 @@ #include "pmac_zilog.h" -/* Not yet implemented */ -#undef HAS_DBDMA - -static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)"; MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); MODULE_LICENSE("GPL"); @@ -446,9 +440,6 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) spin_lock(&uap_a->port.lock); r3 = read_zsreg(uap_a, R3); -#ifdef DEBUG_HARD - pmz_debug("irq, r3: %x\n", r3); -#endif /* Channel A */ push = false; if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { @@ -613,8 +604,6 @@ static void pmz_start_tx(struct uart_port *port) struct uart_pmac_port *uap = to_pmz(port); unsigned char status; - pmz_debug("pmz: start_tx()\n"); - uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; @@ -636,7 +625,7 @@ static void pmz_start_tx(struct uart_port *port) struct circ_buf *xmit = &port->state->xmit; if (uart_circ_empty(xmit)) - goto out; + return; write_zsdata(uap, xmit->buf[xmit->tail]); zssync(uap); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -645,8 +634,6 @@ static void pmz_start_tx(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uap->port); } - out: - pmz_debug("pmz: start_tx() done.\n"); } /* @@ -659,13 +646,9 @@ static void pmz_stop_rx(struct uart_port *port) { struct uart_pmac_port *uap = to_pmz(port); - pmz_debug("pmz: stop_rx()()\n"); - /* Disable all RX interrupts. */ uap->curregs[R1] &= ~RxINT_MASK; pmz_maybe_update_regs(uap); - - pmz_debug("pmz: stop_rx() done.\n"); } /* @@ -910,8 +893,6 @@ static int pmz_startup(struct uart_port *port) unsigned long flags; int pwr_delay = 0; - pmz_debug("pmz: startup()\n"); - uap->flags |= PMACZILOG_FLAG_IS_OPEN; /* A console is never powered down. Else, power up and @@ -947,8 +928,6 @@ static int pmz_startup(struct uart_port *port) pmz_interrupt_control(uap, 1); spin_unlock_irqrestore(&port->lock, flags); - pmz_debug("pmz: startup() done.\n"); - return 0; } @@ -957,8 +936,6 @@ static void pmz_shutdown(struct uart_port *port) struct uart_pmac_port *uap = to_pmz(port); unsigned long flags; - pmz_debug("pmz: shutdown()\n"); - spin_lock_irqsave(&port->lock, flags); /* Disable interrupt requests for the channel */ @@ -987,8 +964,6 @@ static void pmz_shutdown(struct uart_port *port) pmz_set_scc_power(uap, 0); /* Shut the chip down */ spin_unlock_irqrestore(&port->lock, flags); - - pmz_debug("pmz: shutdown() done.\n"); } /* Shared by TTY driver and serial console setup. The port lock is held @@ -1233,10 +1208,6 @@ static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, struct uart_pmac_port *uap = to_pmz(port); unsigned long baud; - pmz_debug("pmz: set_termios()\n"); - - memcpy(&uap->termios_cache, termios, sizeof(struct ktermios)); - /* XXX Check which revs of machines actually allow 1 and 4Mb speeds * on the IR dongle. Note that the IRTTY driver currently doesn't know * about the FIR mode and high speed modes. So these are unused. For @@ -1270,8 +1241,6 @@ static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, pmz_maybe_update_regs(uap); } uart_update_timeout(port, termios->c_cflag, baud); - - pmz_debug("pmz: set_termios() done.\n"); } /* The port lock is not held. */ @@ -1400,7 +1369,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) char name[1]; } *slots; int len; - struct resource r_ports, r_rxdma, r_txdma; + struct resource r_ports; /* * Request & map chip registers @@ -1412,35 +1381,6 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) uap->control_reg = uap->port.membase; uap->data_reg = uap->control_reg + 0x10; - - /* - * Request & map DBDMA registers - */ -#ifdef HAS_DBDMA - if (of_address_to_resource(np, 1, &r_txdma) == 0 && - of_address_to_resource(np, 2, &r_rxdma) == 0) - uap->flags |= PMACZILOG_FLAG_HAS_DMA; -#else - memset(&r_txdma, 0, sizeof(struct resource)); - memset(&r_rxdma, 0, sizeof(struct resource)); -#endif - if (ZS_HAS_DMA(uap)) { - uap->tx_dma_regs = ioremap(r_txdma.start, 0x100); - if (uap->tx_dma_regs == NULL) { - uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; - goto no_dma; - } - uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100); - if (uap->rx_dma_regs == NULL) { - iounmap(uap->tx_dma_regs); - uap->tx_dma_regs = NULL; - uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; - goto no_dma; - } - uap->tx_dma_irq = irq_of_parse_and_map(np, 1); - uap->rx_dma_irq = irq_of_parse_and_map(np, 2); - } -no_dma: /* * Detect port type @@ -1506,8 +1446,6 @@ no_dma: of_device_is_compatible(np->parent->parent, "gatwick")) { /* IRQs on gatwick are offset by 64 */ uap->port.irq = irq_create_mapping(NULL, 64 + 15); - uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4); - uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5); } /* Setup some valid baud rate information in the register @@ -1527,8 +1465,6 @@ static void pmz_dispose_port(struct uart_pmac_port *uap) struct device_node *np; np = uap->node; - iounmap(uap->rx_dma_regs); - iounmap(uap->tx_dma_regs); iounmap(uap->control_reg); uap->node = NULL; of_node_put(np); @@ -1875,7 +1811,6 @@ static struct platform_driver pmz_driver = { static int __init init_pmz(void) { int rc, i; - printk(KERN_INFO "%s\n", version); /* * First, we need to do a direct OF-based probe pass. We diff --git a/drivers/tty/serial/pmac_zilog.h b/drivers/tty/serial/pmac_zilog.h index fa85b0de5c2f..837b97ca0a90 100644 --- a/drivers/tty/serial/pmac_zilog.h +++ b/drivers/tty/serial/pmac_zilog.h @@ -43,7 +43,6 @@ struct uart_pmac_port { #define PMACZILOG_FLAG_TX_ACTIVE 0x00000040 #define PMACZILOG_FLAG_IS_IRDA 0x00000100 #define PMACZILOG_FLAG_IS_INTMODEM 0x00000200 -#define PMACZILOG_FLAG_HAS_DMA 0x00000400 #define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800 #define PMACZILOG_FLAG_IS_OPEN 0x00002000 #define PMACZILOG_FLAG_IS_EXTCLK 0x00008000 @@ -55,16 +54,7 @@ struct uart_pmac_port { volatile u8 __iomem *control_reg; volatile u8 __iomem *data_reg; -#ifdef CONFIG_PPC_PMAC - unsigned int tx_dma_irq; - unsigned int rx_dma_irq; - volatile struct dbdma_regs __iomem *tx_dma_regs; - volatile struct dbdma_regs __iomem *rx_dma_regs; -#endif - unsigned char irq_name[8]; - - struct ktermios termios_cache; }; #define to_pmz(p) ((struct uart_pmac_port *)(p)) @@ -377,7 +367,6 @@ static inline void zssync(struct uart_pmac_port *port) #define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) #define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) #define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) -#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) #define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) #define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 1543a6028856..4733a233bd0c 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -149,12 +149,6 @@ static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port); static void qcom_geni_serial_stop_rx(struct uart_port *uport); static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop); -static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200, - 32000000, 48000000, 51200000, 64000000, - 80000000, 96000000, 100000000, - 102400000, 112000000, 120000000, - 128000000}; - #define to_dev_port(ptr, member) \ container_of(ptr, struct qcom_geni_serial_port, member) @@ -507,7 +501,7 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, */ qcom_geni_serial_poll_tx_done(uport); - if (uart_circ_chars_pending(&uport->state->xmit)) { + if (!uart_circ_empty(&uport->state->xmit)) { irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); writel(irq_en | M_TX_FIFO_WATERMARK_EN, uport->membase + SE_GENI_M_IRQ_EN); @@ -946,25 +940,43 @@ static int qcom_geni_serial_startup(struct uart_port *uport) return 0; } -static unsigned long get_clk_cfg(unsigned long clk_freq) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(root_freq); i++) { - if (!(root_freq[i] % clk_freq)) - return root_freq[i]; - } - return 0; -} - -static unsigned long get_clk_div_rate(unsigned int baud, +static unsigned long get_clk_div_rate(struct clk *clk, unsigned int baud, unsigned int sampling_rate, unsigned int *clk_div) { unsigned long ser_clk; unsigned long desired_clk; + unsigned long freq, prev; + unsigned long div, maxdiv; + int64_t mult; desired_clk = baud * sampling_rate; - ser_clk = get_clk_cfg(desired_clk); + if (!desired_clk) { + pr_err("%s: Invalid frequency\n", __func__); + return 0; + } + + maxdiv = CLK_DIV_MSK >> CLK_DIV_SHFT; + prev = 0; + + for (div = 1; div <= maxdiv; div++) { + mult = div * desired_clk; + if (mult > ULONG_MAX) + break; + + freq = clk_round_rate(clk, (unsigned long)mult); + if (!(freq % desired_clk)) { + ser_clk = freq; + break; + } + + if (!prev) + ser_clk = freq; + else if (prev == freq) + break; + + prev = freq; + } + if (!ser_clk) { pr_err("%s: Can't find matching DFS entry for baud %d\n", __func__, baud); @@ -972,6 +984,9 @@ static unsigned long get_clk_div_rate(unsigned int baud, } *clk_div = ser_clk / desired_clk; + if (!(*clk_div)) + *clk_div = 1; + return ser_clk; } @@ -1003,7 +1018,8 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, if (ver >= QUP_SE_VERSION_2_5) sampling_rate /= 2; - clk_rate = get_clk_div_rate(baud, sampling_rate, &clk_div); + clk_rate = get_clk_div_rate(port->se.clk, baud, + sampling_rate, &clk_div); if (!clk_rate) goto out_restart_rx; diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index e5f1fded423a..f556b4955f59 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -262,6 +262,8 @@ static void rda_uart_set_termios(struct uart_port *port, fallthrough; case CS7: ctrl &= ~RDA_UART_DBITS_8; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS7; break; default: ctrl |= RDA_UART_DBITS_8; diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index 5fe6cccfc1ae..e64e42a19d1a 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -446,6 +446,8 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); + del_timer_sync(&sport->timer); + spin_lock_irqsave(&sport->port.lock, flags); sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS); @@ -476,8 +478,6 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios, UTSR1_TO_SM(UTSR1_ROR); } - del_timer_sync(&sport->timer); - /* * Update the per-port timeout. */ diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index e1585fbae909..d5ca904def34 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -2480,12 +2480,24 @@ s3c24xx_serial_console_write(struct console *co, const char *s, unsigned int count) { unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); + unsigned long flags; + bool locked = true; /* not possible to xmit on unconfigured port */ if (!s3c24xx_port_configured(ucon)) return; + if (cons_uart->sysrq) + locked = false; + else if (oops_in_progress) + locked = spin_trylock_irqsave(&cons_uart->lock, flags); + else + spin_lock_irqsave(&cons_uart->lock, flags); + uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); + + if (locked) + spin_unlock_irqrestore(&cons_uart->lock, flags); } /* Shouldn't be __init, as it can be instantiated from other module */ @@ -2814,6 +2826,7 @@ static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = { .num_clks = 1, .clksel_mask = 0, .clksel_shift = 0, + .ucon_mask = APPLE_S5L_UCON_MASK, }, .def_cfg = { .ucon = APPLE_S5L_UCON_DEFAULT, diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 5fb201c1b563..8472bf70477c 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1134,16 +1134,6 @@ static int sc16is7xx_config_rs485(struct uart_port *port, struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); if (rs485->flags & SER_RS485_ENABLED) { - bool rts_during_rx, rts_during_tx; - - rts_during_rx = rs485->flags & SER_RS485_RTS_AFTER_SEND; - rts_during_tx = rs485->flags & SER_RS485_RTS_ON_SEND; - - if (rts_during_rx == rts_during_tx) - dev_err(port->dev, - "unsupported RTS signalling on_send:%d after_send:%d - exactly one of RS485 RTS flags should be set\n", - rts_during_tx, rts_during_rx); - /* * RTS signal is handled by HW, it's timing can't be influenced. * However, it's sometimes useful to delay TX even without RTS diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 6a8963caf954..9a85b41caa0a 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -24,6 +24,7 @@ #include <linux/sysrq.h> #include <linux/delay.h> #include <linux/mutex.h> +#include <linux/math64.h> #include <linux/security.h> #include <linux/irq.h> @@ -42,6 +43,11 @@ static struct lock_class_key port_lock_key; #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) +/* + * Max time with active RTS before/after data is sent. + */ +#define RS485_MAX_RTS_DELAY 100 /* msecs */ + static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, struct ktermios *old_termios); static void uart_wait_until_sent(struct tty_struct *tty, int timeout); @@ -333,15 +339,18 @@ void uart_update_timeout(struct uart_port *port, unsigned int cflag, unsigned int baud) { - unsigned int size; + unsigned int size = tty_get_frame_size(cflag); + u64 frame_time; - size = tty_get_frame_size(cflag) * port->fifosize; + frame_time = (u64)size * NSEC_PER_SEC; + size *= port->fifosize; /* * Figure the timeout to send the above number of bits. * Add .02 seconds of slop */ port->timeout = (HZ * size) / baud + HZ/50; + port->frame_time = DIV64_U64_ROUND_UP(frame_time, baud); } EXPORT_SYMBOL(uart_update_timeout); @@ -1296,8 +1305,36 @@ static int uart_set_rs485_config(struct uart_port *port, if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user))) return -EFAULT; + /* pick sane settings if the user hasn't */ + if (!(rs485.flags & SER_RS485_RTS_ON_SEND) == + !(rs485.flags & SER_RS485_RTS_AFTER_SEND)) { + dev_warn_ratelimited(port->dev, + "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n", + port->name, port->line); + rs485.flags |= SER_RS485_RTS_ON_SEND; + rs485.flags &= ~SER_RS485_RTS_AFTER_SEND; + } + + if (rs485.delay_rts_before_send > RS485_MAX_RTS_DELAY) { + rs485.delay_rts_before_send = RS485_MAX_RTS_DELAY; + dev_warn_ratelimited(port->dev, + "%s (%d): RTS delay before sending clamped to %u ms\n", + port->name, port->line, rs485.delay_rts_before_send); + } + + if (rs485.delay_rts_after_send > RS485_MAX_RTS_DELAY) { + rs485.delay_rts_after_send = RS485_MAX_RTS_DELAY; + dev_warn_ratelimited(port->dev, + "%s (%d): RTS delay after sending clamped to %u ms\n", + port->name, port->line, rs485.delay_rts_after_send); + } + /* Return clean padding area to userspace */ + memset(rs485.padding, 0, sizeof(rs485.padding)); + spin_lock_irqsave(&port->lock, flags); ret = port->rs485_config(port, &rs485); + if (!ret) + port->rs485 = rs485; spin_unlock_irqrestore(&port->lock, flags); if (ret) return ret; @@ -1610,24 +1647,24 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) * Note: we have to use pretty tight timings here to satisfy * the NIST-PCTS. */ - char_time = (port->timeout - HZ/50) / port->fifosize; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; + char_time = max(nsecs_to_jiffies(port->frame_time / 5), 1UL); + if (timeout && timeout < char_time) char_time = timeout; - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than port->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*port->timeout. - */ - if (timeout == 0 || timeout > 2 * port->timeout) - timeout = 2 * port->timeout; + if (!uart_cts_enabled(port)) { + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than port->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*port->timeout. + */ + if (timeout == 0 || timeout > 2 * port->timeout) + timeout = 2 * port->timeout; + } expire = jiffies + timeout; @@ -1643,7 +1680,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) msleep_interruptible(jiffies_to_msecs(char_time)); if (signal_pending(current)) break; - if (time_after(jiffies, expire)) + if (timeout && time_after(jiffies, expire)) break; } uart_port_deref(port); @@ -2174,15 +2211,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) } put_device(tty_dev); - /* Nothing to do if the console is not suspending */ - if (!console_suspend_enabled && uart_console(uport)) + /* + * Nothing to do if the console is not suspending + * except stop_rx to prevent any asynchronous data + * over RX line. Re-start_rx, when required, is + * done by set_termios in resume sequence + */ + if (!console_suspend_enabled && uart_console(uport)) { + uport->ops->stop_rx(uport); goto unlock; + } uport->suspended = 1; if (tty_port_initialized(port)) { const struct uart_ops *ops = uport->ops; int tries; + unsigned int mctrl; tty_port_set_suspended(port, 1); tty_port_set_initialized(port, 0); @@ -2190,6 +2235,9 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_irq(&uport->lock); ops->stop_tx(uport); ops->set_mctrl(uport, 0); + /* save mctrl so it can be restored on resume */ + mctrl = uport->mctrl; + uport->mctrl = 0; ops->stop_rx(uport); spin_unlock_irq(&uport->lock); @@ -2203,6 +2251,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) uport->name); ops->shutdown(uport); + uport->mctrl = mctrl; } /* diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 2213e6b841d3..228e380db080 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -618,6 +618,8 @@ serial_txx9_set_termios(struct uart_port *up, struct ktermios *termios, case CS6: /* not supported */ case CS8: cval |= TXX9_SILCR_UMODE_8BIT; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; break; } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 0f9b8bd23500..0075a1420005 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2379,8 +2379,12 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, int best_clk = -1; unsigned long flags; - if ((termios->c_cflag & CSIZE) == CS7) + if ((termios->c_cflag & CSIZE) == CS7) { smr_val |= SCSMR_CHR; + } else { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } if (termios->c_cflag & PARENB) smr_val |= SCSMR_PE; if (termios->c_cflag & PARODD) diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index f5ac14c384c4..c0869b080cc3 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -148,7 +148,6 @@ * @port: struct uart_port embedded in this struct * @dev: struct device * * @ier: shadowed copy of the interrupt enable register - * @clkin_rate: input clock to the UART IP block. * @baud_rate: UART serial line rate (e.g., 115200 baud) * @clk: reference to this device's clock * @clk_notifier: clock rate change notifier for upstream clock changes @@ -159,7 +158,6 @@ struct sifive_serial_port { struct uart_port port; struct device *dev; unsigned char ier; - unsigned long clkin_rate; unsigned long baud_rate; struct clk *clk; struct notifier_block clk_notifier; @@ -463,7 +461,7 @@ static void __ssp_update_div(struct sifive_serial_port *ssp) { u16 div; - div = DIV_ROUND_UP(ssp->clkin_rate, ssp->baud_rate) - 1; + div = DIV_ROUND_UP(ssp->port.uartclk, ssp->baud_rate) - 1; __ssp_writel(div, SIFIVE_SERIAL_DIV_OFFS, ssp); } @@ -648,8 +646,8 @@ static int sifive_serial_clk_notifier(struct notifier_block *nb, udelay(DIV_ROUND_UP(12 * 1000 * 1000, ssp->baud_rate)); } - if (event == POST_RATE_CHANGE && ssp->clkin_rate != cnd->new_rate) { - ssp->clkin_rate = cnd->new_rate; + if (event == POST_RATE_CHANGE && ssp->port.uartclk != cnd->new_rate) { + ssp->port.uartclk = cnd->new_rate; __ssp_update_div(ssp); } @@ -666,19 +664,24 @@ static void sifive_serial_set_termios(struct uart_port *port, int rate; char nstop; - if ((termios->c_cflag & CSIZE) != CS8) + if ((termios->c_cflag & CSIZE) != CS8) { dev_err_once(ssp->port.dev, "only 8-bit words supported\n"); + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } if (termios->c_iflag & (INPCK | PARMRK)) dev_err_once(ssp->port.dev, "parity checking not supported\n"); if (termios->c_iflag & BRKINT) dev_err_once(ssp->port.dev, "BREAK detection not supported\n"); + termios->c_iflag &= ~(INPCK|PARMRK|BRKINT); /* Set number of stop bits */ nstop = (termios->c_cflag & CSTOPB) ? 2 : 1; __ssp_set_stop_bits(ssp, nstop); /* Set line rate */ - rate = uart_get_baud_rate(port, termios, old, 0, ssp->clkin_rate / 16); + rate = uart_get_baud_rate(port, termios, old, 0, + ssp->port.uartclk / 16); __ssp_update_baud_rate(ssp, rate); spin_lock_irqsave(&ssp->port.lock, flags); @@ -996,9 +999,8 @@ static int sifive_serial_probe(struct platform_device *pdev) } /* Set up clock divider */ - ssp->clkin_rate = clk_get_rate(ssp->clk); + ssp->port.uartclk = clk_get_rate(ssp->clk); ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE; - ssp->port.uartclk = ssp->baud_rate * 16; __ssp_update_div(ssp); platform_set_drvdata(pdev, ssp); diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index d7fd692286cf..1b0da603ab54 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -535,10 +535,14 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios, /* set character length */ if ((cflag & CSIZE) == CS7) { ctrl_val |= ASC_CTL_MODE_7BIT_PAR; + cflag |= PARENB; } else { ctrl_val |= (cflag & PARENB) ? ASC_CTL_MODE_8BIT_PAR : ASC_CTL_MODE_8BIT; + cflag &= ~CSIZE; + cflag |= CS8; } + termios->c_cflag = cflag; /* set stop bit */ ctrl_val |= (cflag & CSTOPB) ? ASC_CTL_STOP_2BIT : ASC_CTL_STOP_1BIT; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 87b5cd4c9743..b7b44f4050d4 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -37,6 +37,7 @@ static void stm32_usart_stop_tx(struct uart_port *port); static void stm32_usart_transmit_chars(struct uart_port *port); +static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch); static inline struct stm32_port *to_stm32_port(struct uart_port *port) { @@ -107,8 +108,6 @@ static int stm32_usart_config_rs485(struct uart_port *port, stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); - port->rs485 = *rs485conf; - rs485conf->flags |= SER_RS485_RX_DURING_TX; if (rs485conf->flags & SER_RS485_ENABLED) { @@ -128,13 +127,10 @@ static int stm32_usart_config_rs485(struct uart_port *port, rs485conf->delay_rts_after_send, baud); - if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) cr3 &= ~USART_CR3_DEP; - rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; - } else { + else cr3 |= USART_CR3_DEP; - rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; - } writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr1, port->membase + ofs->cr1); @@ -421,6 +417,14 @@ static void stm32_usart_tx_interrupt_enable(struct uart_port *port) stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TXEIE); } +static void stm32_usart_tc_interrupt_enable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TCIE); +} + static void stm32_usart_rx_dma_complete(void *arg) { struct uart_port *port = arg; @@ -446,6 +450,50 @@ static void stm32_usart_tx_interrupt_disable(struct uart_port *port) stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TXEIE); } +static void stm32_usart_tc_interrupt_disable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TCIE); +} + +static void stm32_usart_rs485_rts_enable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct serial_rs485 *rs485conf = &port->rs485; + + if (stm32_port->hw_flow_control || + !(rs485conf->flags & SER_RS485_ENABLED)) + return; + + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); + } else { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); + } +} + +static void stm32_usart_rs485_rts_disable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct serial_rs485 *rs485conf = &port->rs485; + + if (stm32_port->hw_flow_control || + !(rs485conf->flags & SER_RS485_ENABLED)) + return; + + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); + } else { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); + } +} + static void stm32_usart_transmit_chars_pio(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); @@ -553,6 +601,13 @@ static void stm32_usart_transmit_chars(struct uart_port *port) u32 isr; int ret; + if (!stm32_port->hw_flow_control && + port->rs485.flags & SER_RS485_ENABLED) { + stm32_port->txdone = false; + stm32_usart_tc_interrupt_disable(port); + stm32_usart_rs485_rts_enable(port); + } + if (port->x_char) { if (stm32_usart_tx_dma_started(stm32_port) && stm32_usart_tx_dma_enabled(stm32_port)) @@ -593,8 +648,14 @@ static void stm32_usart_transmit_chars(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_empty(xmit)) + if (uart_circ_empty(xmit)) { stm32_usart_tx_interrupt_disable(port); + if (!stm32_port->hw_flow_control && + port->rs485.flags & SER_RS485_ENABLED) { + stm32_port->txdone = true; + stm32_usart_tc_interrupt_enable(port); + } + } } static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) @@ -608,6 +669,13 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) sr = readl_relaxed(port->membase + ofs->isr); + if (!stm32_port->hw_flow_control && + port->rs485.flags & SER_RS485_ENABLED && + (sr & USART_SR_TC)) { + stm32_usart_tc_interrupt_disable(port); + stm32_usart_rs485_rts_disable(port); + } + if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) writel_relaxed(USART_ICR_RTOCF, port->membase + ofs->icr); @@ -717,44 +785,27 @@ static void stm32_usart_disable_ms(struct uart_port *port) static void stm32_usart_stop_tx(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); - struct serial_rs485 *rs485conf = &port->rs485; const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; stm32_usart_tx_interrupt_disable(port); if (stm32_usart_tx_dma_started(stm32_port) && stm32_usart_tx_dma_enabled(stm32_port)) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); - if (rs485conf->flags & SER_RS485_ENABLED) { - if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl & ~TIOCM_RTS); - } else { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl | TIOCM_RTS); - } - } + stm32_usart_rs485_rts_disable(port); } /* There are probably characters waiting to be transmitted. */ static void stm32_usart_start_tx(struct uart_port *port) { - struct stm32_port *stm32_port = to_stm32_port(port); - struct serial_rs485 *rs485conf = &port->rs485; struct circ_buf *xmit = &port->state->xmit; - if (uart_circ_empty(xmit) && !port->x_char) + if (uart_circ_empty(xmit) && !port->x_char) { + stm32_usart_rs485_rts_disable(port); return; - - if (rs485conf->flags & SER_RS485_ENABLED) { - if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl | TIOCM_RTS); - } else { - mctrl_gpio_set(stm32_port->gpios, - stm32_port->port.mctrl & ~TIOCM_RTS); - } } + stm32_usart_rs485_rts_enable(port); + stm32_usart_transmit_chars(port); } @@ -1037,13 +1088,22 @@ static void stm32_usart_set_termios(struct uart_port *port, * CS8 or (CS7 + parity), 8 bits word aka [M1:M0] = 0b00 * M0 and M1 already cleared by cr1 initialization. */ - if (bits == 9) + if (bits == 9) { cr1 |= USART_CR1_M0; - else if ((bits == 7) && cfg->has_7bits_data) + } else if ((bits == 7) && cfg->has_7bits_data) { cr1 |= USART_CR1_M1; - else if (bits != 8) + } else if (bits != 8) { dev_dbg(port->dev, "Unsupported data bits config: %u bits\n" , bits); + cflag &= ~CSIZE; + cflag |= CS8; + termios->c_cflag = cflag; + bits = 8; + if (cflag & PARENB) { + bits++; + cr1 |= USART_CR1_M0; + } + } if (ofs->rtor != UNDEF_REG && (stm32_port->rx_ch || (stm32_port->fifoen && @@ -1222,6 +1282,33 @@ static void stm32_usart_pm(struct uart_port *port, unsigned int state, } } +#if defined(CONFIG_CONSOLE_POLL) + + /* Callbacks for characters polling in debug context (i.e. KGDB). */ +static int stm32_usart_poll_init(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + + return clk_prepare_enable(stm32_port->clk); +} + +static int stm32_usart_poll_get_char(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_RXNE)) + return NO_POLL_CHAR; + + return readl_relaxed(port->membase + ofs->rdr) & stm32_port->rdr_mask; +} + +static void stm32_usart_poll_put_char(struct uart_port *port, unsigned char ch) +{ + stm32_usart_console_putchar(port, ch); +} +#endif /* CONFIG_CONSOLE_POLL */ + static const struct uart_ops stm32_uart_ops = { .tx_empty = stm32_usart_tx_empty, .set_mctrl = stm32_usart_set_mctrl, @@ -1243,6 +1330,11 @@ static const struct uart_ops stm32_uart_ops = { .request_port = stm32_usart_request_port, .config_port = stm32_usart_config_port, .verify_port = stm32_usart_verify_port, +#if defined(CONFIG_CONSOLE_POLL) + .poll_init = stm32_usart_poll_init, + .poll_get_char = stm32_usart_poll_get_char, + .poll_put_char = stm32_usart_poll_put_char, +#endif /* CONFIG_CONSOLE_POLL */ }; /* @@ -1640,18 +1732,24 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_SERIAL_STM32_CONSOLE -static void stm32_usart_console_putchar(struct uart_port *port, unsigned char ch) +static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + u32 isr; + int ret; - while (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE)) - cpu_relax(); - + ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, isr, + (isr & USART_SR_TXE), 100, + STM32_USART_TIMEOUT_USEC); + if (ret != 0) { + dev_err(port->dev, "Error while sending data in UART TX : %d\n", ret); + return; + } writel_relaxed(ch, port->membase + ofs->tdr); } +#ifdef CONFIG_SERIAL_STM32_CONSOLE static void stm32_usart_console_write(struct console *co, const char *s, unsigned int cnt) { @@ -1727,6 +1825,57 @@ static struct console stm32_console = { #define STM32_SERIAL_CONSOLE NULL #endif /* CONFIG_SERIAL_STM32_CONSOLE */ +#ifdef CONFIG_SERIAL_EARLYCON +static void early_stm32_usart_console_putchar(struct uart_port *port, unsigned char ch) +{ + struct stm32_usart_info *info = port->private_data; + + while (!(readl_relaxed(port->membase + info->ofs.isr) & USART_SR_TXE)) + cpu_relax(); + + writel_relaxed(ch, port->membase + info->ofs.tdr); +} + +static void early_stm32_serial_write(struct console *console, const char *s, unsigned int count) +{ + struct earlycon_device *device = console->data; + struct uart_port *port = &device->port; + + uart_console_write(port, s, count, early_stm32_usart_console_putchar); +} + +static int __init early_stm32_h7_serial_setup(struct earlycon_device *device, const char *options) +{ + if (!(device->port.membase || device->port.iobase)) + return -ENODEV; + device->port.private_data = &stm32h7_info; + device->con->write = early_stm32_serial_write; + return 0; +} + +static int __init early_stm32_f7_serial_setup(struct earlycon_device *device, const char *options) +{ + if (!(device->port.membase || device->port.iobase)) + return -ENODEV; + device->port.private_data = &stm32f7_info; + device->con->write = early_stm32_serial_write; + return 0; +} + +static int __init early_stm32_f4_serial_setup(struct earlycon_device *device, const char *options) +{ + if (!(device->port.membase || device->port.iobase)) + return -ENODEV; + device->port.private_data = &stm32f4_info; + device->con->write = early_stm32_serial_write; + return 0; +} + +OF_EARLYCON_DECLARE(stm32, "st,stm32h7-uart", early_stm32_h7_serial_setup); +OF_EARLYCON_DECLARE(stm32, "st,stm32f7-uart", early_stm32_f7_serial_setup); +OF_EARLYCON_DECLARE(stm32, "st,stm32-uart", early_stm32_f4_serial_setup); +#endif /* CONFIG_SERIAL_EARLYCON */ + static struct uart_driver stm32_usart_driver = { .driver_name = DRIVER_NAME, .dev_name = STM32_SERIAL_NAME, diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index feab952aec16..ee69c203b926 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -251,6 +251,8 @@ struct stm32_usart_info stm32h7_info = { #define RX_BUF_P (RX_BUF_L / 2) /* dma rx buffer period */ #define TX_BUF_L RX_BUF_L /* dma tx buffer length */ +#define STM32_USART_TIMEOUT_USEC USEC_PER_SEC /* 1s timeout in µs */ + struct stm32_port { struct uart_port port; struct clk *clk; @@ -269,6 +271,7 @@ struct stm32_port { bool hw_flow_control; bool swap; /* swap RX & TX pins */ bool fifoen; + bool txdone; int rxftcfg; /* RX FIFO threshold CFG */ int txftcfg; /* TX FIFO threshold CFG */ bool wakeup_src; diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c index 9f15922e681b..60c73662f955 100644 --- a/drivers/tty/serial/sunplus-uart.c +++ b/drivers/tty/serial/sunplus-uart.c @@ -498,7 +498,7 @@ static const struct uart_ops sunplus_uart_ops = { }; #ifdef CONFIG_SERIAL_SUNPLUS_CONSOLE -struct sunplus_uart_port *sunplus_console_ports[SUP_UART_NR]; +static struct sunplus_uart_port *sunplus_console_ports[SUP_UART_NR]; static void sunplus_uart_console_putchar(struct uart_port *port, unsigned char ch) diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index c31389114b86..fff50b5b82eb 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -798,10 +798,8 @@ sunsu_change_speed(struct uart_port *port, unsigned int cflag, cval |= UART_LCR_PARITY; if (!(cflag & PARODD)) cval |= UART_LCR_EPAR; -#ifdef CMSPAR if (cflag & CMSPAR) cval |= UART_LCR_SPAR; -#endif /* * Work around a bug in the Oxford Semiconductor 952 rev B diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 007db67292a2..880e2afbb97b 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -321,7 +321,8 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, struct uartlite_data *pdata = port->private_data; /* Set termios to what the hardware supports */ - termios->c_cflag &= ~(BRKINT | CSTOPB | PARENB | PARODD | CSIZE); + termios->c_iflag &= ~BRKINT; + termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CSIZE); termios->c_cflag |= pdata->cflags & (PARENB | PARODD | CSIZE); tty_termios_encode_baud_rate(termios, pdata->baud, pdata->baud); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 250a1d888eeb..9e01fe6c0ab8 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -313,41 +313,27 @@ static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus) static void cdns_uart_handle_tx(void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; + struct circ_buf *xmit = &port->state->xmit; unsigned int numbytes; - if (uart_circ_empty(&port->state->xmit)) { + if (uart_circ_empty(xmit)) { writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR); - } else { - numbytes = port->fifosize; - while (numbytes && !uart_circ_empty(&port->state->xmit) && - !(readl(port->membase + CDNS_UART_SR) & - CDNS_UART_SR_TXFULL)) { - /* - * Get the data from the UART circular buffer - * and write it to the cdns_uart's TX_FIFO - * register. - */ - writel( - port->state->xmit.buf[port->state->xmit.tail], - port->membase + CDNS_UART_FIFO); - - port->icount.tx++; - - /* - * Adjust the tail of the UART buffer and wrap - * the buffer if it reaches limit. - */ - port->state->xmit.tail = - (port->state->xmit.tail + 1) & - (UART_XMIT_SIZE - 1); - - numbytes--; - } + return; + } - if (uart_circ_chars_pending( - &port->state->xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); + numbytes = port->fifosize; + while (numbytes && !uart_circ_empty(xmit) && + !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) { + + writel(xmit->buf[xmit->tail], port->membase + CDNS_UART_FIFO); + + port->icount.tx++; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + numbytes--; } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); } /** diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index 70969bf9d82c..5bc58591665a 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -981,7 +981,7 @@ static const char *zs_type(struct uart_port *uport) static void zs_release_port(struct uart_port *uport) { iounmap(uport->membase); - uport->membase = 0; + uport->membase = NULL; release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); } diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 25c558e65ece..9bc2a9265277 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -1746,6 +1746,8 @@ static int hdlcdev_init(struct slgt_info *info) */ static void hdlcdev_exit(struct slgt_info *info) { + if (!info->netdev) + return; unregister_hdlc_device(info->netdev); free_netdev(info->netdev); info->netdev = NULL; diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 2884cd638d64..18e623325887 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -232,8 +232,10 @@ static void showacpu(void *dummy) unsigned long flags; /* Idle CPUs have no interesting backtrace. */ - if (idle_cpu(smp_processor_id())) + if (idle_cpu(smp_processor_id())) { + pr_info("CPU%d: backtrace skipped as idling\n", smp_processor_id()); return; + } raw_spin_lock_irqsave(&show_lock, flags); pr_info("CPU%d:\n", smp_processor_id()); @@ -260,10 +262,13 @@ static void sysrq_handle_showallcpus(int key) if (in_hardirq()) regs = get_irq_regs(); - if (regs) { - pr_info("CPU%d:\n", smp_processor_id()); + + pr_info("CPU%d:\n", smp_processor_id()); + if (regs) show_regs(regs); - } + else + show_stack(NULL, NULL, KERN_INFO); + schedule_work(&sysrq_showallcpus); } } @@ -274,6 +279,8 @@ static const struct sysrq_key_op sysrq_showallcpus_op = { .action_msg = "Show backtrace of all active CPUs", .enable_mask = SYSRQ_ENABLE_DUMP, }; +#else +#define sysrq_showallcpus_op (*(const struct sysrq_key_op *)NULL) #endif static void sysrq_handle_showregs(int key) @@ -405,6 +412,7 @@ static const struct sysrq_key_op sysrq_moom_op = { .enable_mask = SYSRQ_ENABLE_SIGNAL, }; +#ifdef CONFIG_BLOCK static void sysrq_handle_thaw(int key) { emergency_thaw_all(); @@ -415,6 +423,9 @@ static const struct sysrq_key_op sysrq_thaw_op = { .action_msg = "Emergency Thaw of all frozen filesystems", .enable_mask = SYSRQ_ENABLE_SIGNAL, }; +#else +#define sysrq_thaw_op (*(const struct sysrq_key_op *)NULL) +#endif static void sysrq_handle_kill(int key) { @@ -468,17 +479,9 @@ static const struct sysrq_key_op *sysrq_key_table[62] = { NULL, /* g */ NULL, /* h - reserved for help */ &sysrq_kill_op, /* i */ -#ifdef CONFIG_BLOCK &sysrq_thaw_op, /* j */ -#else - NULL, /* j */ -#endif &sysrq_SAK_op, /* k */ -#ifdef CONFIG_SMP &sysrq_showallcpus_op, /* l */ -#else - NULL, /* l */ -#endif &sysrq_showmem_op, /* m */ &sysrq_unrt_op, /* n */ /* o: This will often be registered as 'Off' at init time */ diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index d903e111dbcb..3cd99ed7c710 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -61,11 +61,10 @@ speed_t tty_termios_baud_rate(struct ktermios *termios) cbaud = termios->c_cflag & CBAUD; -#ifdef BOTHER /* Magic token for arbitrary speed via c_ispeed/c_ospeed */ if (cbaud == BOTHER) return termios->c_ospeed; -#endif + if (cbaud & CBAUDEX) { cbaud &= ~CBAUDEX; @@ -92,16 +91,15 @@ EXPORT_SYMBOL(tty_termios_baud_rate); speed_t tty_termios_input_baud_rate(struct ktermios *termios) { -#ifdef IBSHIFT unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD; if (cbaud == B0) return tty_termios_baud_rate(termios); -#ifdef BOTHER + /* Magic token for arbitrary speed via c_ispeed*/ if (cbaud == BOTHER) return termios->c_ispeed; -#endif + if (cbaud & CBAUDEX) { cbaud &= ~CBAUDEX; @@ -111,9 +109,6 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios) cbaud += 15; } return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; -#else /* IBSHIFT */ - return tty_termios_baud_rate(termios); -#endif /* IBSHIFT */ } EXPORT_SYMBOL(tty_termios_input_baud_rate); @@ -153,11 +148,9 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, termios->c_ispeed = ibaud; termios->c_ospeed = obaud; -#ifdef IBSHIFT if (((termios->c_cflag >> IBSHIFT) & CBAUD) != B0) ibinput = 1; /* An input speed was specified */ -#endif -#ifdef BOTHER + /* If the user asked for a precise weird speed give a precise weird * answer. If they asked for a Bfoo speed they may have problems * digesting non-exact replies so fuzz a bit. @@ -170,11 +163,9 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, } if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER) iclose = 0; -#endif + termios->c_cflag &= ~CBAUD; -#ifdef IBSHIFT termios->c_cflag &= ~(CBAUD << IBSHIFT); -#endif /* * Our goal is to find a close match to the standard baud rate @@ -194,22 +185,16 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, /* For the case input == output don't set IBAUD bits * if the user didn't do so. */ - if (ofound == i && !ibinput) + if (ofound == i && !ibinput) { ifound = i; -#ifdef IBSHIFT - else { + } else { ifound = i; termios->c_cflag |= (baud_bits[i] << IBSHIFT); } -#endif } } while (++i < n_baud_table); - /* - * If we found no match then use BOTHER if provided or warn - * the user their platform maintainer needs to wake up if not. - */ -#ifdef BOTHER + /* If we found no match then use BOTHER. */ if (ofound == -1) termios->c_cflag |= BOTHER; /* Set exact input bits only if the input and output differ or the @@ -217,10 +202,6 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, */ if (ifound == -1 && (ibaud != obaud || ibinput)) termios->c_cflag |= (BOTHER << IBSHIFT); -#else - if (ifound == -1 || ofound == -1) - pr_warn_once("tty: Unable to return correct speed data as your architecture needs updating.\n"); -#endif } EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 63181925ec1a..adae687f654b 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -562,10 +562,8 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) termios.c_cc[VKILL] = tmp.sg_kill; set_sgflags(&termios, tmp.sg_flags); /* Try and encode into Bfoo format */ -#ifdef BOTHER tty_termios_encode_baud_rate(&termios, termios.c_ispeed, termios.c_ospeed); -#endif up_write(&tty->termios_rwsem); tty_set_termios(tty, &termios); return 0; diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 3aa7f0a3ad71..d26ecd15be60 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -8,14 +8,6 @@ */ /* - * CMSPAR, some architectures can't have space and mark parity. - */ - -#ifndef CMSPAR -#define CMSPAR 0 -#endif - -/* * Major and minor numbers. */ diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index c0e4df87ff22..39eaa7b97c40 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -208,10 +208,9 @@ static void ark3116_set_termios(struct tty_struct *tty, lcr |= UART_LCR_PARITY; if (!(cflag & PARODD)) lcr |= UART_LCR_EPAR; -#ifdef CMSPAR if (cflag & CMSPAR) lcr |= UART_LCR_SPAR; -#endif + /* handshake control */ hcr = (cflag & CRTSCTS) ? 0x03 : 0x00; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 06aad0d727dd..332fb92ae575 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -30,10 +30,6 @@ #include <linux/usb/ezusb.h> #include "whiteheat.h" /* WhiteHEAT specific commands */ -#ifndef CMSPAR -#define CMSPAR 0 -#endif - /* * Version Information */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index d4828e69087a..cbd5070bc87f 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -232,6 +232,7 @@ struct uart_port { int hw_stopped; /* sw-assisted CTS flow state */ unsigned int mctrl; /* current modem ctrl settings */ unsigned int timeout; /* character-based timeout */ + unsigned int frame_time; /* frame timing in ns */ unsigned int type; /* port type */ const struct uart_ops *ops; unsigned int custom_divisor; diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h index f6c3323fc4c5..dec15f5b3dec 100644 --- a/include/linux/serial_s3c.h +++ b/include/linux/serial_s3c.h @@ -256,6 +256,9 @@ #define APPLE_S5L_UCON_DEFAULT (S3C2410_UCON_TXIRQMODE | \ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI) +#define APPLE_S5L_UCON_MASK (APPLE_S5L_UCON_RXTO_ENA_MSK | \ + APPLE_S5L_UCON_RXTHRESH_ENA_MSK | \ + APPLE_S5L_UCON_TXTHRESH_ENA_MSK) #define APPLE_S5L_UTRSTAT_RXTHRESH (1<<4) #define APPLE_S5L_UTRSTAT_TXTHRESH (1<<5) diff --git a/include/uapi/asm-generic/termbits-common.h b/include/uapi/asm-generic/termbits-common.h new file mode 100644 index 000000000000..4d084fe8def5 --- /dev/null +++ b/include/uapi/asm-generic/termbits-common.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __ASM_GENERIC_TERMBITS_COMMON_H +#define __ASM_GENERIC_TERMBITS_COMMON_H + +typedef unsigned char cc_t; +typedef unsigned int speed_t; + +/* c_iflag bits */ +#define IGNBRK 0x001 /* Ignore break condition */ +#define BRKINT 0x002 /* Signal interrupt on break */ +#define IGNPAR 0x004 /* Ignore characters with parity errors */ +#define PARMRK 0x008 /* Mark parity and framing errors */ +#define INPCK 0x010 /* Enable input parity check */ +#define ISTRIP 0x020 /* Strip 8th bit off characters */ +#define INLCR 0x040 /* Map NL to CR on input */ +#define IGNCR 0x080 /* Ignore CR */ +#define ICRNL 0x100 /* Map CR to NL on input */ +#define IXANY 0x800 /* Any character will restart after stop */ + +/* c_oflag bits */ +#define OPOST 0x01 /* Perform output processing */ +#define OCRNL 0x08 +#define ONOCR 0x10 +#define ONLRET 0x20 +#define OFILL 0x40 +#define OFDEL 0x80 + +/* c_cflag bit meaning */ +/* Common CBAUD rates */ +#define B0 0x00000000 /* hang up */ +#define B50 0x00000001 +#define B75 0x00000002 +#define B110 0x00000003 +#define B134 0x00000004 +#define B150 0x00000005 +#define B200 0x00000006 +#define B300 0x00000007 +#define B600 0x00000008 +#define B1200 0x00000009 +#define B1800 0x0000000a +#define B2400 0x0000000b +#define B4800 0x0000000c +#define B9600 0x0000000d +#define B19200 0x0000000e +#define B38400 0x0000000f +#define EXTA B19200 +#define EXTB B38400 + +#define CMSPAR 0x40000000 /* mark or space (stick) parity */ +#define CRTSCTS 0x80000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* tcflow() ACTION argument and TCXONC use these */ +#define TCOOFF 0 /* Suspend output */ +#define TCOON 1 /* Restart suspended output */ +#define TCIOFF 2 /* Send a STOP character */ +#define TCION 3 /* Send a START character */ + +/* tcflush() QUEUE_SELECTOR argument and TCFLSH use these */ +#define TCIFLUSH 0 /* Discard data received but not yet read */ +#define TCOFLUSH 1 /* Discard data written but not yet sent */ +#define TCIOFLUSH 2 /* Discard all pending data */ + +#endif /* __ASM_GENERIC_TERMBITS_COMMON_H */ diff --git a/include/uapi/asm-generic/termbits.h b/include/uapi/asm-generic/termbits.h index 2fbaf9ae89dd..890ef29053e2 100644 --- a/include/uapi/asm-generic/termbits.h +++ b/include/uapi/asm-generic/termbits.h @@ -2,10 +2,8 @@ #ifndef __ASM_GENERIC_TERMBITS_H #define __ASM_GENERIC_TERMBITS_H -#include <linux/posix_types.h> +#include <asm-generic/termbits-common.h> -typedef unsigned char cc_t; -typedef unsigned int speed_t; typedef unsigned int tcflag_t; #define NCCS 19 @@ -41,156 +39,107 @@ struct ktermios { }; /* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 /* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 +#define IUCLC 0x0200 +#define IXON 0x0400 +#define IXOFF 0x1000 +#define IMAXBEL 0x2000 +#define IUTF8 0x4000 /* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 +#define OLCUC 0x00002 +#define ONLCR 0x00004 +#define NLDLY 0x00100 +#define NL0 0x00000 +#define NL1 0x00100 +#define CRDLY 0x00600 +#define CR0 0x00000 +#define CR1 0x00200 +#define CR2 0x00400 +#define CR3 0x00600 +#define TABDLY 0x01800 +#define TAB0 0x00000 +#define TAB1 0x00800 +#define TAB2 0x01000 +#define TAB3 0x01800 +#define XTABS 0x01800 +#define BSDLY 0x02000 +#define BS0 0x00000 +#define BS1 0x02000 +#define VTDLY 0x04000 +#define VT0 0x00000 +#define VT1 0x04000 +#define FFDLY 0x08000 +#define FF0 0x00000 +#define FF1 0x08000 /* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ +#define CBAUD 0x0000100f +#define CSIZE 0x00000030 +#define CS5 0x00000000 +#define CS6 0x00000010 +#define CS7 0x00000020 +#define CS8 0x00000030 +#define CSTOPB 0x00000040 +#define CREAD 0x00000080 +#define PARENB 0x00000100 +#define PARODD 0x00000200 +#define HUPCL 0x00000400 +#define CLOCAL 0x00000800 +#define CBAUDEX 0x00001000 +#define BOTHER 0x00001000 +#define B57600 0x00001001 +#define B115200 0x00001002 +#define B230400 0x00001003 +#define B460800 0x00001004 +#define B500000 0x00001005 +#define B576000 0x00001006 +#define B921600 0x00001007 +#define B1000000 0x00001008 +#define B1152000 0x00001009 +#define B1500000 0x0000100a +#define B2000000 0x0000100b +#define B2500000 0x0000100c +#define B3000000 0x0000100d +#define B3500000 0x0000100e +#define B4000000 0x0000100f +#define CIBAUD 0x100f0000 /* input baud rate */ /* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 +#define ISIG 0x00001 +#define ICANON 0x00002 +#define XCASE 0x00004 +#define ECHO 0x00008 +#define ECHOE 0x00010 +#define ECHOK 0x00020 +#define ECHONL 0x00040 +#define NOFLSH 0x00080 +#define TOSTOP 0x00100 +#define ECHOCTL 0x00200 +#define ECHOPRT 0x00400 +#define ECHOKE 0x00800 +#define FLUSHO 0x01000 +#define PENDIN 0x04000 +#define IEXTEN 0x08000 +#define EXTPROC 0x10000 /* tcsetattr uses these */ #define TCSANOW 0 |